Displaying publications 1 - 20 of 28 in total

Abstract:
Sort:
  1. Madani B, Mirshekari A, Yahia E
    J Sci Food Agric, 2016 Jul;96(9):2963-8.
    PMID: 26374618 DOI: 10.1002/jsfa.7462
    BACKGROUND: There have been no reports on the effects of preharvest calcium application on anthracnose disease severity, antioxidant activity and cellular changes during ambient storage of papaya, and therefore the objective of this study was to investigate these effects.

    RESULTS: Higher calcium concentrations (1.5 and 2% w/v) increased calcium concentration in the peel and pulp tissues, maintained firmness, and reduced anthracnose incidence and severity. While leakage of calcium-treated fruit was lower for 1.5 and 2% calcium treatments compared to the control, microscopic results confirmed that pulp cell wall thickness was higher after 6 days in storage, for the 2% calcium treatment compared to the control. Calcium-treated fruit also had higher total antioxidant activity and total phenolic compounds during storage.

    CONCLUSION: Calcium chloride, especially at higher concentrations, is effective in maintaining papaya fruit quality during ambient storage. © 2015 Society of Chemical Industry.

    Matched MeSH terms: Crop Production
  2. Azlan NSM, Wee SY, Ismail NAH, Nasir HM, Aris AZ
    Environ Toxicol Chem, 2020 10;39(10):1908-1917.
    PMID: 32621623 DOI: 10.1002/etc.4813
    The organophosphorus pesticides (OPPs) commonly used in agricultural practices can pose a risk of potential exposure to humans via food consumption. We describe an analytical method for solid-phase extraction coupled with high-performance liquid chromatography-diode array detector (SPE-HPLC-DAD) for the detection of OPPs (quinalphos, diazinon, and chlorpyrifos) in rice grains. The isolation of targeted residues was initiated with double extraction before SPE-HPLC-DAD, crucially reducing matrix interferences and detecting a wide range of multiple residues in rice grains. Coefficients of 0.9968 to 0.9991 showed a strong linearity, with limits of detection and quantification ranging from 0.36 to 0.68 µg/kg and from 1.20 to 2.28 µg/kg, respectively. High recoveries (80.4-110.3%) were observed at 3 spiking levels (50, 100, and 200 µg/kg), indicating good accuracy. The relative standard deviations of all residues (0.19-8.66%) validated the method precision. Sample analysis of 10 rice grain types (n = 30) available in the Asian market revealed that quinalphos, diazinon, and chlorpyrifos at concentrations of 1.08, 1.11, and 1.79 µg/kg, respectively, remained far below the maximum residue limits (0.01-0.5 mg/kg). However, regular monitoring is necessary to confirm that multiresidue occurrence remains below permissible limits while controlling pests. Environ Toxicol Chem 2020;39:1908-1917. © 2020 SETAC.
    Matched MeSH terms: Crop Production
  3. Baghdadi A, Halim RA, Ghasemzadeh A, Ramlan MF, Sakimin SZ
    PeerJ, 2018;6:e5280.
    PMID: 30386686 DOI: 10.7717/peerj.5280
    Background: Corn silage is an important feed for intense ruminant production, but the growth of corn relies heavily on the use of chemical fertilizers. Sustainable crop production requires careful management of all nutrient sources available on a farm, particularly in corn-based cropping systems.

    Methods: Experiments were conducted to determine the appropriate technique of corn-legume intercropping in conjunction with the supplemental use of chemical fertilizers, organic manure, and biofertilizers (BFs). Acetylene reduction assays (ARAs) were also performed on corn and soybean roots.

    Results: Combining chemical fertilizers with chicken manure (CM) in a 50:50 ratio and applying 50% NPK+50% CM+BF produced fresh forage and dry matter (DM) yields that were similar to those produced in the 100% nitrogen (N), phosphorus (P), potassium (K) treatment. Among the lone fertilizer treatments, the inorganic fertilizer (100% NPK) treatment produced the highest DM yield (13.86 t/ha) of forage and outyielded the 100% CM (9.74 t/ha) treatment. However, when CM was combined with NPK, the resulting DM yield of forage (13.86 t/ha) was the same as that resulting from 100% NPK (13.68 t/ha). Compared with CM applications alone, combinations of NPK and CM applications resulted in increased plant height, crop growth rates (CGRs) and leaf area index (LAI), but the values of these parameters were similar to those resulting from 100% NPK application. Fertilizers in which the ratio was 50% CM+50% NPK or 50% CM+50% NPK+BF resulted in protein yields that were similar to those resulting from conventional fertilizers. Similarly, the CP content did not significantly differ between applications of the 100% NPK and 50% CM+50% NPK fertilizers. The use of BFs had no significant impact on improving either the yield or quality of forage fertilized with inorganic or organic fertilizer. Lactic acid responded differently to different fertilizer applications and was significantly higher in the fertilized plots than in the unfertilized plots. Compared with treatments of lone chemical and lone organic manure fertilizers, treatments involving applications of BF and a combination of BF and NPK or CM resulted in higher ARA values.

    Discussion: There is no simple and easy approach to increase biological nitrogen fixation (BNF) in grain legumes grown as part of a cropping system under realistic farm field conditions. Overall, evidence recorded from this study proves that, compared with corn monocrops combined with CM and chemical fertilizers, corn-soybean intercrops could increase forage yields and quality, produce higher total protein yields, and reduce the need for protein supplements and chemical fertilizers.

    Matched MeSH terms: Crop Production
  4. Ali LG, Nulit R, Ibrahim MH, Yien CYS
    Sci Rep, 2021 Feb 16;11(1):3864.
    PMID: 33594103 DOI: 10.1038/s41598-021-83434-3
    Rice is an important staple crop produced and consumed worldwide. However, poor seed emergence is one of the main impediments to obtaining higher yield of rice especially in hot and dry ecosystems of the world that are ravaged by drought. Therefore, this study was carried out to evaluate the effects of potassium nitrate (KNO3), salicylic acid (SA) and silicon dioxide (SiO2) priming in improving emergence, seedling growth, biochemical attributes and antioxidant activities of FARO44 rice under drought conditions. Rice seedlings primed with 2.5% and 5% KNO3, 3% and 3.5% SiO2, and 1 mM and 2.5 mM SA were subjected to three drought levels of low, moderate and severe under the greenhouse. Seed emergence, seedling growth, biochemical attributes and antioxidant activities were thereafter evaluated. Seed priming experiments were laid in a completely randomized design with five replicates per treatment. The results found that rice seedlings responded differently to different priming treatments. However, all primed rice seedlings had significantly (P ≤ 0.05) improved emergence percentage (72-92%), seedling growth, seedling vigor, seedling fresh and dry biomass and shorter emergence time compared with controls. Likewise, total soluble protein content, activities of catalase, ascorbate peroxidase and superoxide dismutase, carbohydrate, soluble sugar and total chlorophyll contents of rice seedlings were increased by more than two-folds by seed priming compared with control. Salicylic acid showed less effect in increasing emergence, seedling growth, antioxidant activities and biochemical attributes of rice. Thus, this study established that seed priming with KNO3 (2.5% and 5%) and SiO2 (3% and 3.5%) were more effective in improving emergence, seedling growth, biochemical attributes and antioxidant activities of FARO44. Thus, priming of FARO44 rice with this chemical is recommended for fast emergence, seedling growth and drought resistance in dry ecosystems.
    Matched MeSH terms: Crop Production/methods
  5. Doni F, Suhaimi NSM, Mispan MS, Fathurrahman F, Marzuki BM, Kusmoro J, et al.
    Int J Mol Sci, 2022 Jan 10;23(2).
    PMID: 35054923 DOI: 10.3390/ijms23020737
    Rice, the main staple food for about half of the world's population, has had the growth of its production stagnate in the last two decades. One of the ways to further improve rice production is to enhance the associations between rice plants and the microbiome that exists around, on, and inside the plant. This article reviews recent developments in understanding how microorganisms exert positive influences on plant growth, production, and health, focusing particularly on rice. A variety of microbial species and taxa reside in the rhizosphere and the phyllosphere of plants and also have multiple roles as symbiotic endophytes while living within plant tissues and even cells. They alter the morphology of host plants, enhance their growth, health, and yield, and reduce their vulnerability to biotic and abiotic stresses. The findings of both agronomic and molecular analysis show ways in which microorganisms regulate the growth, physiological traits, and molecular signaling within rice plants. However, many significant scientific questions remain to be resolved. Advancements in high-throughput multi-omics technologies can be used to elucidate mechanisms involved in microbial-rice plant associations. Prospectively, the use of microbial inoculants and associated approaches offers some new, cost-effective, and more eco-friendly practices for increasing rice production.
    Matched MeSH terms: Crop Production*
  6. Mohammad Mu'az Hashim, Mohd Khanif Yusop, Radziah Othman, Samsuri Abd. Wahid
    Sains Malaysiana, 2017;46:925-932.
    Implementation of sound fertilizer management in rice cultivation is essential in optimizing productivity and profitability. The use of controlled release fertilizer (CRF) to improve crop production in various cropping systems has been widely explored, with new approaches and materials continually being studied to produce new CRF. A field study was carried out to determine the efficiency of local CRFs on rice production and N uptake using MR220 CL1 rice variety. Ten different types of CRFs consisting of two groups namely biochar impregnated urea (BIU 300-5, BIU 300-10, BIU 700-5 and BIU 700-10) and palm stearin (PS) coated urea with nitrification inhibitors (PS, PS+DMPP-100, PS+DMPP-50, PS+DMPP-150, PS+Cu and PS+Zn) were used as treatments. Plant height, SPAD reading, 1000-grain weight and harvest index (HI) showed significant improvement in rice treated with both biochar impregnated and palm stearin coated urea. With respect to grain yield, BIU 300-10, BIU 700-5, BIU 700-10, PS+DMPP-100, PS+DMPP-50, PS+DMPP-150 and PS+Cu treatments significantly increased rice yield. The CRFs mostly showed significantly higher N uptake in rice, especially in rice grains, however, there was no significant difference among treatments in soil residual ammonium (NH4+-N). The newly-developed CRFs showed huge potential as an alternative for common urea, especially BIU 700-5, BIU 700-10, PS+DMPP-100 and PS+DMPP-50, in increasing rice grain yield. With proper approaches, these CRFs can contribute in improving rice production to provide sufficient food for ever increasing population.
    Matched MeSH terms: Crop Production
  7. Siddiquee S, Shafawati SN, Naher L
    Biotechnol Rep (Amst), 2017 Mar;13:1-7.
    PMID: 28352555 DOI: 10.1016/j.btre.2016.11.001
    Oil palm fibres are easy to degrade, eco-friendly in nature and once composted, they can be categorized under nutrient-enriched biocompost. Biocompost is not only a good biofertilizer but also a good biocontrol agent against soil-borne pathogens. In this research, experimental works on the composting of empty fruit bunches (EFB) from the oil palm industry were conducted using two potential Trichoderma strains. Analysis of pH initially found the soils to be slightly acidic. However, after composting, the soils were found to be alkaline. Trichoderma propagules increased by 72% in the soils compared to other fungi. Soil electrical conductivity was found to be 50.40 μS/cm for compost A, 42.10 μS/cm for compost B and 40.11 μS/cm for the control. The highest C:N ratio was obtained for compost A at 3.33, followed by compost B at 2.79, and then the control at 1.55. The highest percentages of nitrogen (N), phosphorus (P), and potassium (K) were found in compost A (0.91:2.13:6.68), which was followed by compost B (0.46:0.83:5.85) and then the control (0.32:0.26:5.76). Thus, the biocomposting of oil palm fibres shows great potential for enhancing soil micronutrient, plant growth performance, and crop yield production.
    Matched MeSH terms: Crop Production
  8. Nakasha JJ, Sinniah UR, Kemat N, Mallappa KS
    Pharmacogn Mag, 2016 Jul;12(Suppl 4):S460-S464.
    PMID: 27761075
    BACKGROUND: Chlorophytum borivilianum is an industrially valued medicinal crop. Propagation through seeds is not feasible because of low germination percentage and long dormancy period. Therefore, callus culture and plant regeneration can be an alternative to improve this crop production. Also, callus can serve as an alternative source of bioactive compounds.

    OBJECTIVE: To evaluate the effect of different phytohormones on callus induction, subculture cycle, and regeneration studies of callus in C. borivilianum.

    MATERIALS AND METHODS: Young shoot buds of C. borivilianum were inoculated on Murashige and Skoog medium fortified with 3% sucrose and different concentrations (0, 1, 5, 10, and 15 mg/L) of either naphthalene acetic acid or 2,4-dichlorophenoxyacetic acid or indole-3-acetic acid and callus induction was evaluated up to four subcultures cycles. Shoot regeneration from callus was studied on Murashige and Skoog media fortified with 6-benzylaminopurine andkinetin or thidiazuron at varied levels (0, 0.5, 1, 2, and 3 mg/L). Microshoots were rooted on Murashige and Skoog media supplemented with 1.0 mg/L indole-3-butyric acid and plantlets were acclimatized before transferred to the natural conditions.

    RESULTS: Callus induction was better evidenced on Murashige and Skoog media containing 5 mg/L 2,4-dichlorophenoxyacetic acid up to fourth subculture. Callus differentiated into shoots on Murashige and Skoog media fortified with 6-benzylaminopurine or kinetin, whereas thidiazuron completely failed to regenerate shoots. Furthermore, microshoots rooted on 1.0 mg/L indole-3-butyric acid containing Murashige and Skoog media. The rooted plantlets were successfully acclimatized and established in soil with 88.3% survivability.

    CONCLUSION: The type of auxins played an important role in inducing callus tissue from shoot bud explants of Safed musli. In future, this in vitro protocol could benefit in crop improvement programs and serve as a new source of bioactive compounds from Safed musli callus tissue for various therapeutic applications.

    SUMMARY: Explants de-differentiated to form callus on Murashige and Skoog media containing 5 mg/L 2,4-D up to fourth subculture.Callus re-differentiated into shoots on Murashige and Skoog media fortified with 0.5 mg/L BAP.In vitro rooting of shoots was achieved on 1.0 mg/L IBA containing Murashige and Skoog media.The rooted plantlets were successfully acclimatized and established in soil with 88.3% survivability. Abbreviations used: MS: Murashige and Skoog, NAA: naphthalene acetic acid, 2,4-D: 2,4-dichlorophenoxyacetic acid, IAA: indole-3-acetic acid, BAP: 6-benzylaminopurine, Kn: Kinetin, TDZ: thidiazuron, IBA: indole-3-butyric acid, RCBD: Randomized Complete Block Design, DMRT: Duncan's Multiple Range Test.

    Matched MeSH terms: Crop Production
  9. Diyana Jamaludin, Desa Ahmad, Rezuwan Kamaruddin, Hawa Z. E. Jaafar
    MyJurnal
    Tropical greenhouses require active evaporative cooling system such as pad-and-fan to ensure a suitable microclimate for crop production. Excess heat causes indoor temperature to become hotter than desired resulting in detrimental effects to crop growth and production. Solar radiation intensity and outside temperature affect temperature and relative humidity level inside a greenhouse, while wide gradients in temperature and relative humidity can cause problems related to crop growth and production uniformity. A 300 m2 greenhouse, equipped with evaporative pad and four exhaust fans at each end walls, was used in the study. Horizontal and vertical profiles of the temperature and relative humidity inside the greenhouse were investigated. Results showed that temperature increased from evaporative pad area to exhaust fans area in a horizontal plane, while relative humidity showed an inverse pattern from temperature. In the vertical plane, temperature increased, while relative humidity decreased from lower level to the upper level. ANOVA results showed that in overall, temperature and relative humidity inside the greenhouse were uniform as there was no significant difference at 95% confidence interval. Thus, it was concluded that greenhouse cooling system by evaporative pad and exhaust fans are suitable for application in a tropical country such as Malaysia.
    Matched MeSH terms: Crop Production
  10. Azman Halimi R, Barkla BJ, Andrés-Hernandéz L, Mayes S, King GJ
    J Sci Food Agric, 2020 Mar 15;100(4):1495-1504.
    PMID: 31756768 DOI: 10.1002/jsfa.10157
    BACKGROUND: Food security is recognized as a major global challenge, yet human food-chain systems are inherently not geared towards nutrition, with decisions on crop and cultivar choice not informed by dietary composition. Currently, food compositional tables and databases (FCT/FCDB) are the primary information sources for decisions relating to dietary intake. However, these only present single mean values representing major components. Establishment of a systematic controlled vocabulary to fill this gap requires representation of a more complex set of semantic relationships between terms used to describe nutritional composition and dietary function.

    RESULTS: We carried out a survey of 11 FCT/FCDB and 177 peer-reviewed papers describing variation in nutritional composition and dietary function for food crops to identify a comprehensive set of terms to construct a controlled vocabulary. We used this information to generate a Crop Dietary Nutrition Data Framework (CDN-DF), which incorporates controlled vocabularies systematically organized into major classes representing nutritional components and dietary functions. We demonstrate the value of the CDN-DF for comparison of equivalent components between crop species or cultivars, for identifying data gaps and potential for formal meta-analysis. The CDN-DF also enabled us to explore relationships between nutritional components and the functional attributes of food.

    CONCLUSION: We have generated a structured crop dietary nutrition data framework, which is generally applicable to the collation and comparison of data relevant to crop researchers, breeders, and other stakeholders, and will facilitate dialogue with nutritionists. It is currently guiding the establishment of a more robust formal ontology. © 2019 Society of Chemical Industry.

    Matched MeSH terms: Crop Production
  11. Khan M, Kakar S, Marwat K, Khan I
    Sains Malaysiana, 2013;42:1395-1401.
    Time of weed control and fertilizer application usually decide the profitability of crop production. The effects of weed control and macronutrients on maize crop were investigated. The study was undertaken in March 2009, using a RCBD design with split plot arrangements. The experimental set up was established at the Agricultural University Peshawar and seedbeds were prepared with the proper moisture regime. Maize was planted with one plot left weed free for first six weeks while another infested with weed. The combinations of macronutrients used were nitrogen, phosphorus, potassium, nitrogen-phosphorus, nitrogen-potassium, phosphorus-potassium and nitrogen-phosphorus-potassium. Control (no fertilizer) was included for comparison. The observations revealed that when a comparison was made between the application of fertilizers and weed control, the latter proved more important because weed infested plots had no harvestable maize plants. The role of main nutrients in crop production is well known and cannot be left aside, however weed infestation does not provide us a fair choice of fertilizers application. The maximum maize grain yield was recorded under nitrogen-phosphorus combination and promising results were obtained. The weeds and maize benefited equally in terms of fresh and dry weed biomass with an application of fertilizer in particular N singly or together with P. In view of this, application of fertilizer should be changed from broadcast to band and/or placement. In general, a positive interaction was seen between N and P promoting the growth of maize and weeds. It can be said that herbicide application for weed control is important because of the fact that hand weeding is not economical, difficult, time consuming because of perennial weeds and hot weather conditions in the month of June.
    Matched MeSH terms: Crop Production
  12. Chen M, Atiqul Haq SM, Ahmed KJ, Hussain AHMB, Ahmed MNQ
    PLoS One, 2021;16(10):e0258196.
    PMID: 34673797 DOI: 10.1371/journal.pone.0258196
    Climate change is likely to worsen the food security situation through its impact on food production, which may indirectly affect fertility behaviour. This study examines the direct and indirect effects of climate change (e.g., temperature and precipitation) via the production of major crops, as well as their short- and long-term effects on the total fertility rate (TFR) in Bangladesh. We used structural equation modelling (SEM) to perform path analysis and distinguish the direct influence of climate change on fertility and its indirect influence on fertility through food security. We also applied the error correction model (ECM) to analyze the time-series data on temperature and precipitation, crop production and fertility rate of Bangladesh from 1966 to 2015. The results show that maximum temperature has a direct effect and indirect negative effect-via crop production-on TFR, while crop production has a direct positive effect and indirect negative effect-via infant mortality-on TFR. In the short term, TFR responds negatively to the maximum temperature but positively in the long term. The effect of rainfall on TFR is found to be direct, positive, but mainly short-term. Although indicators of economic development play an important part in the fertility decline in Bangladesh, some climate change parameters and crop production are non-negligible factors.
    Matched MeSH terms: Crop Production
  13. Kusin FM, Akhir NIM, Mohamat-Yusuff F, Awang M
    Environ Sci Pollut Res Int, 2017 Feb;24(6):5293-5304.
    PMID: 28004372 DOI: 10.1007/s11356-016-8270-0
    The environmental impacts with regard to agro-based biofuel production have been associated with the impact of greenhouse gas (GHG) emissions. In this study, field GHG emissions during plantation stage of palm oil-based biofuel production associated with land use changes for oil palm plantation development have been evaluated. Three different sites of different land use changes prior to oil palm plantation were chosen; converted land-use (large and small-scales) and logged-over forest. Field sampling for determination of soil N-mineralisation and soil organic carbon (SOC) was undertaken at the sites according to the age of palm, i.e. <5 years (immature), 5-20 and >21 years (mature oil palms). The field data were incorporated into the estimation of nitrous oxide (N2O) and the resulting CO2-eq emissions as well as for estimation of carbon stock changes. Irrespective of the land conversion scenarios, the nitrous oxide emissions were found in the range of 6.47-7.78 kg N2O-N/ha resulting in 498-590 kg CO2-eq/ha. On the other hand, the conversion of tropical forest into oil palm plantation has resulted in relatively higher GHG emissions (i.e. four times higher and carbon stock reduction by >50%) compared to converted land use (converted rubber plantation) for oil palm development. The conversion from previously rubber plantation into oil palm plantation would increase the carbon savings (20% in increase) thus sustaining the environmental benefits from the palm oil-based biofuel production.
    Matched MeSH terms: Crop Production
  14. Teo YX, Chan YS, Gouwanda D, Gopalai AA, Nurzaman SG, Thannirmalai S
    Sci Rep, 2021 07 22;11(1):15020.
    PMID: 34294775 DOI: 10.1038/s41598-021-94268-4
    Although global demand for palm oil has been increasing, most activities in the oil palm plantations still rely heavily on manual labour, which includes fresh fruit bunch (FFB) harvesting and loose fruit (LF) collection. As a result, harvesters and/or collectors face ergonomic risks resulting in musculoskeletal disorder (MSD) due to awkward, extreme and repetitive posture during their daily work routines. Traditionally, indirect approaches were adopted to assess these risks using a survey or manual visual observations. In this study, a direct measurement approach was performed using Inertial Measurement Units, and surface Electromyography sensors. The instruments were attached to different body parts of the plantation workers to quantify their muscle activities and assess the ergonomics risks during FFB harvesting and LF collection. The results revealed that the workers generally displayed poor and discomfort posture in both activities. Biceps, multifidus and longissimus muscles were found to be heavily used during FFB harvesting. Longissimus, iliocostalis, and multifidus muscles were the most used muscles during LF collection. These findings can be beneficial in the design of various assistive tools which could improve workers' posture, reduce the risk of injury and MSD, and potentially improve their overall productivity and quality of life.
    Matched MeSH terms: Crop Production*
  15. Wan Fazilah Fazlil Ilahi, Desa Ahmad
    Sains Malaysiana, 2016;46:975-980.
    A well-known planting medium in soilless culture is a coconut based material famously known in Malaysia as cocopeat.
    It is a viable ecologically friendly peat soil substitute for containerized crop production. The multipurpose growing media
    had received much interest particularly in commercial applications. This study focused on the physical and hydraulic
    characteristics of cocopeat perlite mixture as a growing media in containerized plant production. Perlite was added to
    cocopeat at a ratio of 3 cocopeat: 1 perlite. Bulk density, particle density, porosity, particle size distribution, water holding
    capacity, wettability and hydraulic conductivity of the media were evaluated. About 82.93% of the total particles were
    in the range between 0.425 and 4 mm in diameter at a bulk density of 0.09 g/cm3
    . Total porosity (79%) and wettability
    improved with the incorporation of perlite to cocopeat. This study showed that water holding capacity was very high at
    912.54% whereas the saturated hydraulic conductivity was low at 0.1 cm/s. The results showed that adding perlite to
    cocopeat had improved the physical and hydraulic characteristics of the media.
    Matched MeSH terms: Crop Production
  16. Abberton M, Batley J, Bentley A, Bryant J, Cai H, Cockram J, et al.
    Plant Biotechnol J, 2016 Apr;14(4):1095-8.
    PMID: 26360509 DOI: 10.1111/pbi.12467
    Agriculture is now facing the 'perfect storm' of climate change, increasing costs of fertilizer and rising food demands from a larger and wealthier human population. These factors point to a global food deficit unless the efficiency and resilience of crop production is increased. The intensification of agriculture has focused on improving production under optimized conditions, with significant agronomic inputs. Furthermore, the intensive cultivation of a limited number of crops has drastically narrowed the number of plant species humans rely on. A new agricultural paradigm is required, reducing dependence on high inputs and increasing crop diversity, yield stability and environmental resilience. Genomics offers unprecedented opportunities to increase crop yield, quality and stability of production through advanced breeding strategies, enhancing the resilience of major crops to climate variability, and increasing the productivity and range of minor crops to diversify the food supply. Here we review the state of the art of genomic-assisted breeding for the most important staples that feed the world, and how to use and adapt such genomic tools to accelerate development of both major and minor crops with desired traits that enhance adaptation to, or mitigate the effects of climate change.
    Matched MeSH terms: Crop Production
  17. Aktar-Uz-Zamana, Md., Tuhina-Khatun, Mst., Mohamed Hanafi Musa, Sahebi, Mahbod
    MyJurnal
    A resistant variety with high yielding potential is key for increasing crop production to
    fulfill the food requirement of the ever increasing world populations. Consequently, the aim of plant
    breeders is to develop high yielding varieties or cultivars that are resistant or tolerant to specific
    diseases or insects. For developing a resistant variety, it is enormously indispensable to incorporate or
    introgress the specific resistant genes of that particular disease into the recipient. Suppression
    subtractive hybridization (SSH) is a powerful technique for the identification of disease specific
    differentially expressed genes that are expressed in a resistant or susceptible variety. This paper
    presents a brief review on the SSH technique with examples focusing on the identification of the
    wheat disease specific differentially expressed genes and their defense mechanisms against fungal
    pathogens in global wheat cultivars. This review is helpful for wheat researchers for the updated
    information on the SSH technique for the identification of differentially expressed genes in the global
    wheat cultivars and varieties. Eventually, the identified genes could be used to develop the disease
    resistance variety through marker-assisted backcrossing programme or conventional breeding.
    Matched MeSH terms: Crop Production
  18. Shamshuddin J, Panhwar Q, Shazana M, Elisa A, Fauziah C, Naher U
    Sains Malaysiana, 2016;45:383-392.
    Acid sulfate soils are generally not suitable for the crop production unless they are efficiently improved. A study was conducted to improve the productivity of acid sulfate soils for rice cultivation using ground magnesium limestone (GML), basalt and organic fertilizer. The study was conducted on rice in laboratory, glasshouse and field. The pH of acid sulfate soils was low and exchangeable Al was very high which affected rice growth. The application of GML and basalt increased soil pH and reduced Al toxicity. GML required to ameliorate the soils for rice cultivation was 4 t ha-1. Basalt in combination with organic fertilizer was a good soil amendment, but required to be applied a few months ahead of rice cultivation. Due to GML or basalt application, rice plants grew well even though water pH was below 5. The highest rice yield obtained was 4.0 t ha-1 season-1 for Sulfaquepts and it was 7.5 t ha-1 season-1 for Sulfosaprists. In general, the application of GML or basalt in combination with organic fertilizer improved the productivity of acid sulfate soils and consequently enhanced rice yield.
    Matched MeSH terms: Crop Production
  19. Tariq Shahzad, Muhammad Mansoor Javaid, Hasnain Waheed, Tasawer Abbas, Muhammad Ashraf, Feng-Min Li, et al.
    Sains Malaysiana, 2018;47:2625-2635.
    Drought is one of the commonly occurring environmental stresses, limiting crop production in many countries. Selection
    of cultivar is the most effective and economical means for alleviating the adverse effects of drought stress on crops. The
    present study aimed to investigate the growth, some physiological processes, yield and quality of some newly-developed
    wheat cultivars (AARI-2011, AAS-2011, Faisalabad-2008, Millat-2011 and Punjab-2011) under field drought stress
    conditions. The cultivars were sown in a field under normal irrigation and drought-induced conditions. Maximum net
    photosynthetic rate was recorded in cv. AAS-2011 at growth stage of 67 days after wheat emergence under normal irrigation
    and cv. Faisalabad-2008 at 67 days after wheat emergence under drought condition. Leaf stomatal conductance and
    transpiration rate were maximum in cv. Faisalabad-2008 under drought conditions. The adverse effects of drought stress
    were observed more on cv. Millat-2011 than Faisalabad-2008, with respect to net photosynthetic rate and transpiration.
    Drought exerted a significant adverse effect on leaf stomatal conductance at 74 days after wheat emergence which was
    recorded as 230 mmol m-2 s-1. Among the cultivars, AAS-2011 recorded maximum yield traits and grain yield under normal
    irrigation condition and Faisalabad-2008 under drought condition. Cultivar Millat-2011 was the most susceptible to
    drought and Faisalabad-2008 the most resistant to drought. Faisalabad-2008 maintained the quality at the most under
    drought stress conditions. It is concluded that Fasialabad-2008 should be grown under field drought conditions to achieve
    maximal yield and quality of wheat.
    Matched MeSH terms: Crop Production
  20. Elsoragaby S, Yahya A, Nawi NM, Mahadi MR, Mairghany M, Muazu A, et al.
    Heliyon, 2020 Nov;6(11):e05332.
    PMID: 33294651 DOI: 10.1016/j.heliyon.2020.e05332
    Measurement of human energy expenditure during crop production helps in the optimization of production operations and costs by identifying steps which that can benefit from the use of appropriate mechanization technologies. This study measures human energy expenditure associated with all 6 major rice (Oryza sativa L.) cultivation operations using two measurement methods-i.e. conventional human energy expenditure method and direct measurement with a Garmin forerunner 35 body media. The aim of this study was to provide a detailed comparison of these two methods and document the human energy costs in a manner that will identify steps to be taken to help optimize agricultural practices. Results (mean + 95%CL) revealed that the total human energy expenditure obtained through the conventional method was 25.5% higher (33.3 ± 1 versus 26.6 ± 1.3) in transplanting and 26.1% higher (30.3 ± 1.9 versus 24.0 ± 2.1) than the human energy expenditure recorded using the Garmin method in broadcast seeding method. Similarly, during the harvesting operation, the conventional measurement and Garmin measurement methods differed significantly, with the conventional method the human energy expenditure was 89.9% higher (3.2 ± 0.4 versus 1.68 ± 0.2) in the fields using the transplanting and 88.7% higher (3.3 ± 0.5 versus 1.8 ± 0.3) in the fields using the broadcast seeding than the human energy expenditure recorded using the Garmin method. When using Garmin method, the human energy expenditure in the case of using the midsize combine harvester was 13.49% lesser (592.4 ± 67.2 versus 522.0 ± 75.1) than the case of using conventional one. Results based on heart rate also indicated that operations such as tillage were less intensive (72 ± 3.3 bpm) compared with operations such as chemicals spraying (135 ± 4 bpm). Although we did not have a criterion measure available to determine which method was the most accurate, the Garmin measurement gives an estimate of actual physical human energy expended in performing a specific task with consider all conditions and thus more information to aid in identifying critical operations that could be optimized and mechanized.
    Matched MeSH terms: Crop Production
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links