MyMedR

Displaying publications 1 - 20 of 34 in total

Abstract:

Sort:

Fulltext A Prospective Randomised Controlled Study Comparing Ultrasonic Dissector with Electrocautery for Axillary Dissection in Patients of Carcinoma Breast

Deori A, Gupta N, Gupta AK, Yelamanchi R, Agrawal H, Durga CK

Malays J Med Sci, 2021 Feb;28(1):97-104.
PMID: 33679225 DOI: 10.21315/mjms2021.28.1.12

Background: Axillary dissection is one of the important components of modified radical mastectomy (MRM). The present study was conducted to compare surgical outcomes by using monopolar electrocautery and ultrasonic dissector for axillary dissection in MRM.
Methods: A parallel randomised controlled single blinded study was conducted with a sample size of 70 patients who were randomised into two groups. One group underwent MRM using ultrasonic dissector (Group A) and the other one using electrocautery (Group B). Intra- and post-operative outcomes were compared.
Results: Group A had an average operating time of 30.86 min, which was statistically less than that of Group B. The mean mop count and the daily drain output in Group A were less as compared to Group B and the differences were statistically significant. Drain was removed early in Group A as compared to Group B. However, post-operative pain scores and seroma formation were not statistically significant among the two groups.
Conclusion: Ultrasonic dissector group had significantly lesser intra-operative bleeding, operating time and post-operative drain output when compared to electrocautery group. However, the two groups had no significant difference in post-operative pain scores and seroma formation.

Matched MeSH terms: Electrocoagulation
Fulltext A Randomized Controlled Trial of Novel Treatment for Hemorrhagic Radiation Proctitis

Pui WC, Chieng TH, Siow SL, Nik Abdullah NA, Sagap I

Asian Pac J Cancer Prev, 2020 Oct 01;21(10):2927-2934.
PMID: 33112550 DOI: 10.31557/APJCP.2020.21.10.2927

BACKGROUND: Various methods have been used for treatment of hemorrhagic radiation proctitis (HRP) with variable results. Currently, the preferred treatment is formalin application or endoscopic therapy with argon plasma coagulation. Recently, a novel therapy with colonic water irrigation and oral antibiotics showed promising results and more effective compared to 4% formalin application for HRP. The study objective is to compare the effect of water irrigation and oral antibiotics versus 4% formalin application in improving per rectal bleeding due to HRP and related symptoms such as diarrhoea, tenesmus, stool frequency, stool urgency and endoscopic findings.
METHODS: We conducted a study on 34 patients with HRP and randomly assigned the patients to two treatment arm groups (n=17). The formalin group underwent 4% formalin dab and another session 4 weeks later. The irrigation group self-administered daily rectal irrigation at home for 8 weeks and consumed oral metronidazole and ciprofloxacin during the first one week. We measured the patients' symptoms and endoscopic findings before and after total of 8 weeks of treatment in both groups.
RESULTS: Our study showed that HRP patients had reduced per rectal bleeding (p = 0.003) in formalin group, whereas irrigation group showed reduced diarrhoea (p=0.018) and tenesmus (p=0.024) symptoms. The comparison between the two treatment arms showed that irrigation technique was better than formalin technique for tenesmus (p=0.043) symptom only.
CONCLUSION: This novel treatment showed benefit in treating HRP. It could be a new treatment option which is safe and conveniently self-administered at home or used as a combination with other therapies to improve the treatment outcome for HRP.
.

Matched MeSH terms: Electrocoagulation/methods*
Fulltext A case of recurrent respiratory papillomatosis successfully removed via endoscopic argon plasma coagulation (APC) with no evidence of recurrence

Wong JL, Tie ST, Lee J, Kannan SK, Rashid Ali MR, Ibrahim A, et al.

Med J Malaysia, 2014 Aug;69(4):195-6.
PMID: 25500852 MyJurnal

Recurrent respiratory papillomatosis (RRP) is a benign disease caused by the human papilloma virus (HPV), characterized by the formation of recurrent, epithelial neoplastic lesions in the airways. While benign, they can cause significant airway obstruction in some cases. Difficulties in treatment arise from the recurrent nature of the lesions despite repeated procedures. Other known procedures that result in deep tissue damage also cause unacceptable collateral damage to the underlying airway mucosa. We describe a case of recurrent papillomatosis that was successfully treated with argon plasma coagulation ( APC) when laser and electrocautery ablation had failed in the past. After the papillomatasis was treated with APC, there is no recurrence on repeat scope at 4 months and 9 months after the initial procedure. The procedure was done as a day case and there is no complication from the procedure. The property of the APC that allows it to cause only superficial thermal damage to the tissue makes it a suitable adjunct therapy to the treatment of papillomas, which are usually superficial lesions.

Matched MeSH terms: Electrocoagulation
A comprehensive review on contaminants removal from pharmaceutical wastewater by electrocoagulation process

Zaied BK, Rashid M, Nasrullah M, Zularisam AW, Pant D, Singh L

Sci Total Environ, 2020 Jul 15;726:138095.
PMID: 32481207 DOI: 10.1016/j.scitotenv.2020.138095

The pharmaceuticals are emergent contaminants, which can create potential threats for human health and the environment. All the pharmaceutical contaminants are becoming enormous in the environment as conventional wastewater treatment cannot be effectively implemented due to toxic and intractable action of pharmaceuticals. For this reason, the existence of pharmaceutical contaminants has brought great awareness, causing significant concern on their transformation, occurrence, risk, and fate in the environments. Electrocoagulation (EC) treatment process is effectively applied for the removal of contaminants, radionuclides, pesticides, and also harmful microorganisms. During the EC process, an electric current is employed directly, and both electrodes are dissoluted partially in the reactor under the special conditions. This electrode dissolution produces the increased concentration of cation, which is finally precipitated as hydroxides and oxides. Different anode materials usage like aluminum, stainless steel, iron, etc. are found more effective in EC operation for efficient removal of pharmaceutical contaminants. Due to the simple procedure and less costly material, EC method is extensively recognized for pharmaceutical wastewater treatment over further conventional treatment methods. The EC process has more usefulness to destabilize the pharmaceutical contaminants with the neutralization of charge and after that coagulating those contaminants to produce flocs. Thus, the review places particular emphasis on the application of EC process to remove pharmaceutical contaminants. First, the operational parameters influencing EC efficiency with the electroanalysis techniques are described. Second, in this review emerging challenges, current developments and techno-economic concerns of EC are highlighted. Finally, future recommendations and prospective on EC are envisioned.

Matched MeSH terms: Electrocoagulation
A critical review of state-of-the-art electrocoagulation technique applied to COD-rich industrial wastewaters

Mousazadeh M, Niaragh EK, Usman M, Khan SU, Sandoval MA, Al-Qodah Z, et al.

Environ Sci Pollut Res Int, 2021 Aug;28(32):43143-43172.
PMID: 34164789 DOI: 10.1007/s11356-021-14631-w

Electrocoagulation (EC) is one of the emerging technologies in groundwater and wastewater treatment as it combines the benefits of coagulation, sedimentation, flotation, and electrochemical oxidation processes. Extensive research efforts implementing EC technology have been executed over the last decade to treat chemical oxygen demand (COD)-rich industrial wastewaters with the aim to protect freshwater streams (e.g., rivers, lakes) from pollution. A comprehensive review of the available recent literature utilizing EC to treat wastewater with high COD levels is presented. In addition, recommendations are provided for future studies to improve the EC technology and broaden its range of application. This review paper introduces some technologies which are often adopted for industrial wastewater treatment. Then, the EC process is compared with those techniques as a treatment for COD-rich wastewater. The EC process is considered as the most privileged technology by different research groups owing to its ability to deal with abundant volumes of wastewater. After, the application of EC as a single and combined treatment for COD-rich wastewaters is thoroughly reviewed. Finally, this review attempts to highlight the potentials and limitations of EC. Related to the EC process in batch operation mode, the best operational conditions are found at 10 V and 60 min of voltage and reaction time, respectively. These last values guarantee high COD removal efficiencies of > 90%. This review also concludes that considerably large operation costs of the EC process appears to be the serious drawback and renders it as an unfeasible approach for handling of COD rich wastewaters. In the end, this review has attempted to highlights the potential and limitation of EC and suggests that vast notably research in the field of continuous flow EC system is essential to introduce this technology as a convincing wastewater technology.

Matched MeSH terms: Electrocoagulation
Fulltext A novel technique for the management of blandin-nuhn mucocele: a case report

Kumaresan R, Karthikeyan P, Mohammed F, Thapasum Fairozekhan A

Int J Clin Pediatr Dent, 2013 Sep;6(3):201-4.
PMID: 25206223 DOI: 10.5005/jp-journals-10005-1219

Mucocele, a common benign cystic lesion of minor salivary gland and associated ducts develops following extravasation or retention of mucous material in the subepithelial tissue. Occurrence of mucocele of tongue is considered less frequent when compared to a higher incidence of mucocele in the lower lip of young patients. Different modalities of treatment, such as conventional surgical excision followed by newer techniques like cryosurgery, electrocautery have been proposed to completely remove the lesion and reduce the chances of recurrence. Herewith, we report a novel treatment technique using alginate impression material to aid in complete excision of mucocele of glands of Blandin-Nuhn. How to cite this article: Kumaresan R, Karthikeyan P, Mohammed F, Fairozekhan TA. A Novel Technique for the Management of Blandin-Nuhn Mucocele: A Case Report. Int J Clin Pediatr Dent 2013;6(3):201-204.

Matched MeSH terms: Electrocoagulation
Abnormal per rectal bleed

Singh AH

Scott Med J, 2011 Feb;56(1):59.
PMID: 21515535 DOI: 10.1258/smj.2010.010026

A 3-year old girl presented to our A&E with a complaint of an acute event of per rectal bleed. The parent had given a history of a visit to a nearby waterfall one day ago. Upon admission she developed hypotension and had a fainting episode due to the excessive passing of blood per rectum. The case report shows how the appropriate investigations were carried out and the twist behind the cause.

Matched MeSH terms: Electrocoagulation
Application of Box-Behnken design to mineralization and color removal of palm oil mill effluent by electrocoagulation process

Rakhmania, Kamyab H, Yuzir MA, Al-Qaim FF, Purba LDA, Riyadi FA

Environ Sci Pollut Res Int, 2023 Jun;30(28):71741-71753.
PMID: 34480301 DOI: 10.1007/s11356-021-16197-z

In this study, palm oil mill effluent (POME) was treated using electrocoagulation, whereby the influencing factors including voltage, electrolysis time, and electrolyte amount were optimized to achieve the highest chemical oxygen demand (COD) and color removal efficiencies. Graphite was selected as electrode material due to its performance better compared to aluminum and copper. Response surface methodology (RSM) was carried out for optimization of the electrocoagulation operating parameters. The best model obtained using Box-Behnken design (BBD) were quadratic for COD removal (R2 = 0.9844), color reduction (R2 = 0.9412), and oil and grease removal (R2 = 0.9724). The result from the analysis of variance (ANOVA) was obtained to determine the relationship between factors and treatment efficiencies. The experimental results under optimized conditions such as voltage 14, electrolysis time of 3 h, and electrolyte amount of 13.41 g/L show that the electrocoagulation process effectively reduced the COD (56%), color (65%), and oil and grease (99%) of the POME treatment. Graphical abstract.

Matched MeSH terms: Electrocoagulation/methods
Fulltext Application of platelet rich fibrin for management of an electrosurge induced osteonecrosis involving maxillary alveolus

Suresh N, Chandrasekaran B, Muthusamy S, Kannan S, Muthu K

Singapore Dent J, 2015 Dec;36:39-43.
PMID: 26684495 DOI: 10.1016/j.sdj.2014.11.004

BACKGROUND: Application of principles of electrocautery for hemostasis dates back to prehistoric times. Its modern implementation in various fields of general and head and neck surgeries have been well documented. However its usage in minor oral surgical procedures has gained popularity only recently. Complications associated with electro-surgery in the dental field are relatively rare and there is insufficient literature on its management.
CASE REPORT: We present a case report on management of an electrosurgery induced osteonecrosis involving maxillary alveolus of left premolars.
DISCUSSION: Inadvertent contact of the electrosurgery tip on bone can result in necrosis making it necessary to remove the sequestrum and graft the defect. Platelet rich fibrin in combination with bone grafts have been well documented to provide successful periodontal regeneration.
CLINICAL IMPLICATIONS: Our aim of presenting this report is to create awareness among the health care providers regarding electrosurgical injuries. To our knowledge, this is the first time platelet rich fibrin has been used in the management of intraoral electrosurgical injury. Combining bone grafts with platelet rich fibrin is a good alternative as it can be done with relative ease and predictable outcome.

Matched MeSH terms: Electrocoagulation
Atypical Presentation of Pyogenic Granuloma of the Right Index Finger: A Rare Case Report

Tan LS, Daud MH, Nasirudin N

J Hand Surg Asian Pac Vol, 2018 Dec;23(4):577-580.
PMID: 30428790 DOI: 10.1142/S2424835518720335

Pyogenic granuloma, also known as lobular capillary hemangioma, is a benign vascular lesion of the skin or mucous membrane with rapid growth or repetitive trauma. Rarely seen in adult, its management varies and surgical intervention is usually common. We report a case of pyogenic granuloma of the right index finger in a 46-year-old gentleman who presented with painless swelling of the right index finger after a trivial injury. Wedge biopsy confirmed the diagnosis and excision of the granuloma measuring 3 cm × 3 cm × 2 cm was done with curettage and electrocautery over the base of granuloma. The wound subsequently healed well with good functional and aesthetic outcome.

Matched MeSH terms: Electrocoagulation/methods*
Boron removal by electrocoagulation and recovery

Isa MH, Ezechi EH, Ahmed Z, Magram SF, Kutty SR

Water Res, 2014 Mar 15;51:113-23.
PMID: 24412846 DOI: 10.1016/j.watres.2013.12.024

This work investigated the removal of boron from wastewater and its recovery by electrocoagulation and hydrothermal mineralization methods respectively. The experimental design was developed using Box-Behnken Model. An initial study was performed based on four preselected variables (pH, current density, concentration and time) using synthetic wastewater. Response surface methodology (RSM) was used to evaluate the effect of process variables and their interaction on boron removal. The optimum conditions were obtained as pH 6.3, current density 17.4 mA/cm(2), and time 89 min. At these applied optimum conditions, 99.7% boron removal from an initial concentration of 10.4 mg/L was achieved. The process was effectively optimized by RSM with a desirability value of 1.0. The results showed that boron removal efficiency enhanced with increase in current density and treatment time. Removal efficiency also increased when pH was increased from 4 to 7 and subsequently decreased at pH 10. Adsorption kinetics study revealed that the reaction followed pseudo second order kinetic model; evidenced by high correlation and goodness of fit. Thermodynamics study showed that mechanism of boron adsorption was chemisorption and the reaction was endothermic in nature. Furthermore, the adsorption process was spontaneous as indicated by negative values of the adsorption free energy. Treatment of real produced water using electrocoagulation resulted in 98% boron removal. The hydrothermal mineralization study showed that borate minerals (Inyoite, Takadaite and Nifontovite) can be recovered as recyclable precipitate from electrocoagulation flocs of produced water.

Matched MeSH terms: Electrocoagulation/methods*
Chromoblastomycosis in Sarawak, East malaysian Borneo

Yap FB

Trans R Soc Trop Med Hyg, 2010 Feb;104(2):168-9.
PMID: 19766279 DOI: 10.1016/j.trstmh.2009.05.016

A retrospective study was conducted to determine the clinical characteristics and treatment outcomes of 11 new patients with a histological diagnosis of chromoblastomycosis at Sarawak General Hospital, Malaysia, between 1996 and 2008. The majority (81.8%) were males, and the median age at presentation was 40 years. Over half the patients were farmers. All the patients had irregular verrucous lesions, mostly on the lower limbs (90.9%), and had initially been misdiagnosed. The mean duration of the lesions was 13.8 years. Oral terbinafine and itraconazole were administered to all the patients; clinical cure was seen in 54.5%, and partial response in 18.2%. Concomitant electrocautery and cryotherapy were only effective for small lesions.

Matched MeSH terms: Electrocoagulation
Clinoptilolite augmented electrocoagulation process for the reduction of high-strength ammonia and color from stabilized landfill leachate

Hamid MAA, Aziz HA, Yusoff MS, Rezan SA

Water Environ Res, 2021 Apr;93(4):596-607.
PMID: 32991022 DOI: 10.1002/wer.1461

The high-strength leachate produced from sanitary landfill is a serious issue around the world as it poses adverse effects on aquatic life and human health. Physio-chemical technology is one of the promising options as the leachate normally presents in stabilized form and not fully amendable by biological treatment. In this research, the effectiveness of natural zeolite (clinoptilolite) augmented electrocoagulation process (hybrid system) for removing high-strength ammonia (3,442 mg/L) and color (8,427 Pt-Co) from naturally saline (15 ppt) local landfill leachate was investigated. A batch mode laboratory-scale reactor with parallel-monopolar aluminum electrodes attached to a direct current (DC) electric power was used as an electrocoagulation reactor for performance enhancement purpose. Optimum operational conditions of 146 g/L zeolite dosage, 600 A/m2 current density, 60 min treatment time, 200 rpm stirring speed, 35 min settling duration, and pH 9 were recorded with up to 70% and 88% removals of ammonia and color, respectively. The estimated overall operational cost was 26.22 $/m3 . The biodegradability of the leachate had improved from 0.05 to 0.27 in all post-treatment processes. The findings revealed the ability of the hybrid process as a viable option in eliminating concentrated ammonia and color in natural saline landfill leachate. PRACTITIONER POINTS: Clinoptilolite was augmented on the electrocoagulation process in saline and stabilized landfill leachate (15 ppt). The high strength NH3 -N (3,442 mg/L) and color (8,427 Pt-Co) were 70% and 88% removed, respectively. The optimum conditions occurred at 140 g/L zeolite, 60 mA/cm2 current density, 60 min, and final pH of 8.20. The biodegradability of the leachate improved from 0.05 to 0.27 after the treatment. This hybrid treatment was simple, faster, and did not require auxiliary electrolyte.

Matched MeSH terms: Electrocoagulation
Fulltext Effect of operating parameters on decolourisation of Palm Oil Mill Effluent (POME) using electrocoagulation process

Nur Syuhaidah Mohd Aris, Shariff Ibrahim, Borhannuddin Arifin, Yahaya Hawari

Pertanika Journal of Science & Technology, 2017;25(107):297-206.
MyJurnal

Electrocoagulation has proven to be an effective method in the treatment of wastewater. This study evaluated the decolourisation of Palm Oil Mill Effluent (POME) using electrocoagulation (EC) batch reactor by utilising aluminium as sacrificial electrode. POME sample source from a final discharged pond at a palm oil mill was characterised for its colour, chemical oxygen demand (COD), pH, conductivity and turbidity; were found to be 2707 PtCo, 3909 mg/L, 7.63, 12.82 mS/cm and 755 NTU respectively. The respective effects of operating parameters such as pH (3 to 11), applied voltage (5 V to 20 V), plate gap (7.5 to 11.5 cm) and operating time (1 to 8 hours) were investigated. The decolourisation of POME was observed to increase with increasing voltage and operating time. Highest removal efficiency was observed at pH 5, 20 V applied voltage, 9.5 cm plate gap and at 8-hour operating time with colour removal efficiency of 89, 79, 78 and 64% respectively. From the findings, it can be concluded that electrocoagulation process using aluminium electrodes is a reliable technique for the removal of colour from POME.

Matched MeSH terms: Electrocoagulation
Fulltext Electrocautery resection as a treatment option for canine transmissible venereal tumour (CTVT)

Rajendren, S. K., Krishnan, K., Ganesh, T. N., Roslan, N. S., Hashim, N. A., Mohamad, M. A.

Jurnal Veterinar Malaysia, 2019;31(2):19-22.
MyJurnal

A 5-year-old Mongrel was brought presented with the complaint of having serosanguineous discharge from penis for a month since adoption. Physical examination revealed cauliflower-like mass at the bulbus glandis. Presence of numerous anisokaryotic and anisocytotic round to oval histiocytes with multivacuolated cytoplasm from cytology, an evidence of canine transmissibale venereal tumour (CTVT). The mass was successfully surgically resected using electrocautery and was in remission for 12 months (since January 2019).

Matched MeSH terms: Electrocoagulation
Electrocoagulation of palm oil mill effluent as wastewater treatment and hydrogen production using electrode aluminum

Nasution MA, Yaakob Z, Ali E, Tasirin SM, Abdullah SR

J Environ Qual, 2011 Jul-Aug;40(4):1332-9.
PMID: 21712603 DOI: 10.2134/jeq2011.0002

Palm oil mill effluent (POME) is highly polluting wastewater generated from the palm oil milling process. Palm oil mill effluent was used as an electrolyte without any additive or pretreatment to perform electrocoagulation (EC) using electricity (direct current) ranging from 2 to 4 volts in the presence of aluminum electrodes with a reactor volume of 20 L. The production of hydrogen gas, removal of chemical oxygen demand (COD), and turbidity as a result of electrocoagulation of POME were determined. The results show that EC can reduce the COD and turbidity of POME by 57 and 62%, respectively, in addition to the 42% hydrogen production. Hydrogen production was also helpful to remove the lighter suspended solids toward the surface. The production of Al(OH)XHO at the aluminum electrode (anode) was responsible for the flocculation-coagulation process of suspended solids followed by sedimentation under gravity. The production of hydrogen gas from POME during EC was also compared with hydrogen gas production by electrolysis of tap water at pH 4 and tap water without pH adjustment under the same conditions. The main advantage of this study is to produce hydrogen gas while treating POME with EC to reduce COD and turbidity effectively.

Matched MeSH terms: Electrocoagulation/instrumentation; Electrocoagulation/methods*
Electrocoagulation treatment of raw landfill leachate using iron-based electrodes: Effects of process parameters and optimization

Huda N, Raman AAA, Bello MM, Ramesh S

J Environ Manage, 2017 Dec 15;204(Pt 1):75-81.
PMID: 28865309 DOI: 10.1016/j.jenvman.2017.08.028

The main problem of landfill leachate is its diverse composition comprising many persistent organic pollutants which must be removed before being discharge into the environment. This study investigated the treatment of raw landfill leachate using electrocoagulation process. An electrocoagulation system was designed with iron as both the anode and cathode. The effects of inter-electrode distance, initial pH and electrolyte concentration on colour and COD removals were investigated. All these factors were found to have significant effects on the colour removal. On the other hand, electrolyte concentration was the most significant parameter affecting the COD removal. Numerical optimization was also conducted to obtain the optimum process performance. Under optimum conditions (initial pH: 7.73, inter-electrode distance: 1.16 cm, and electrolyte concentration (NaCl): 2.00 g/L), the process could remove up to 82.7% colour and 45.1% COD. The process can be applied as a pre-treatment for raw leachates before applying other appropriate treatment technologies.

Matched MeSH terms: Electrocoagulation/methods*
Electrocoagulation using a rotated anode: A novel reactor design for textile wastewater treatment

Naje AS, Chelliapan S, Zakaria Z, Abbas SA

J Environ Manage, 2016 Jul 1;176:34-44.
PMID: 27039362 DOI: 10.1016/j.jenvman.2016.03.034

This paper investigates the optimum operational conditions of a novel rotated bed electrocoagulation (EC) reactor for the treatment of textile wastewater. The effect of various operational parameters such as rotational speed, current density (CD), operational time (RT), pH, temperature, and inter-electrode distance (IED) on the pollutant removal efficiency were examined. In addition, the consumption of aluminum (Al) and electrical energy, as well as operating costs at optimum conditions were also calculated. The results indicated that the optimum conditions for the treatment of textile wastewater were achieved at CD = 4 mA/cm(2), RT = 10 min, rotational speed = 150 rpm, pH = 4.57, temperature = 25 °C, and IED = 1 cm. The electrode consumption, energy consumption, and operating costs were 0.038 kg/m(3), 4.66 kWh/m(3) and 0.44 US$/m(3), respectively. The removal efficiencies of chemical oxygen demand (COD), biological oxygen demand (BOD), total suspended solid (TSS), turbidity and color were 97.10%, 95.55%, 98%, 96% and 98.50%, respectively, at the first 10 min of reaction time, while the phenol compound of the wastewater was almost entirely removed (99.99%). The experimental results confirm that the new reactor design with rotated anode impellers and cathode rings provided high treatment efficiency at a reduced reaction time and with lower energy consumption.

Matched MeSH terms: Electrocoagulation
FTIR, CHNS and XRD analyses define mechanism of glyphosate herbicide removal by electrocoagulation

Danial R, Sobri S, Abdullah LC, Mobarekeh MN

Chemosphere, 2019 Oct;233:559-569.
PMID: 31195261 DOI: 10.1016/j.chemosphere.2019.06.010

In this study, the performance of glyphosate removal in an electrocoagulation batch with two electrodes formed by the same metal type, consisting of aluminum, iron, steel and copper have been compared. The aim of this study intends to remove glyphosate from an aqueous solution by an electrocoagulation process using metal electrode plates, which involves electrogeneration of metal cations as coagulant agents. The production of metal cations showed an ability to bind together to form aggregates of flocs composed of a combination of glyphosate and metal oxide. Electrocoagulation using aluminum electrodes indicated a high percentage removal of glyphosate, 94.25%; followed by iron electrodes, 88.37%; steel electrodes, 62.82%; and copper electrodes, 46.69%. The treated aqueous solution was then analyzed by Fourier Transform Infrared Spectroscopy. Percentages of Carbon, Hydrogen, Nitrogen, Sulfur remaining in the treated aqueous solution after the electrocoagulation process have been determined. The treated water and sludge were characterized and the mechanism of the overall process was concluded as an outcome. An X-Ray Diffraction analysis of dried sludge confirmed that new polymeric compounds were formed during the treatment. The sludge composed of new compounds were also verified the removals. This study revealed that an electrocoagulation process using metal electrodes is reliable and efficient.

Matched MeSH terms: Electrocoagulation/methods
Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients

Bani-Melhem K, Elektorowicz M, Tawalbeh M, Al Bsoul A, El Gendy A, Kamyab H, et al.

Chemosphere, 2023 Oct;339:139693.
PMID: 37536541 DOI: 10.1016/j.chemosphere.2023.139693

Treating and reusing wastewater has become an essential aspect of water management worldwide. However, the increase in emerging pollutants such as polycyclic aromatic hydrocarbons (PAHs), which are presented in wastewater from various sources like industry, roads, and household waste, makes their removal difficult due to their low concentration, stability, and ability to combine with other organic substances. Therefore, treating a low load of wastewater is an attractive option. The study aimed to address membrane fouling in the submerged membrane bioreactor (SMBR) used for wastewater treatment. An aluminum electrocoagulation (EC) device was combined with SMBR as a pre-treatment to reduce fouling. The EC-SMBR process was compared with a conventional SMBR without EC, fed with real grey water. To prevent impeding biological growth, low voltage gradients were utilized in the EC deviceThe comparison was conducted over 60 days with constant transmembrane pressure and infinite solid retention time (SRT). In phase I, when the EC device was operated at a low voltage gradient (0.64 V/cm), no significant improvement in the pollutants removal was observed in terms of color, turbidity, and chemical oxygen demand (COD). Nevertheless, during phase II, a voltage gradient of 1.26 V/cm achieved up to 100%, 99.7%, 92%, 94.1%, and 96.5% removals in the EC-SMBR process in comparison with 95.1%, 95.4%, 85%, 91.7% and 74.2% removals in the SMBR process for turbidity, color, COD, ammonia nitrogen (NH3-N), total phosphorus (TP), respectively. SMBR showed better anionic surfactant (AS) removal than EC-SMBR. A voltage gradient of 0.64 V/cm in the EC unit significantly reduced fouling by 23.7%, while 1.26 V/cm showed inconsistent results. Accumulation of Al ions negatively affected membrane performance. Low voltage gradients in EC can control SMBR fouling if Al concentration is controlled. Future research should investigate EC-SMBR with constant membrane flux for large-scale applications, considering energy consumption and operating costs.

Matched MeSH terms: Electrocoagulation

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links