The rapid advances in technology and improved living standard of the society necessitate abundant use of fossil fuels which poses two major challenges to any nation. One is fast depletion of fossil fuel resources; the other is environmental pollution. The porous medium combustion (PMC) has proved to be one of the technically and economically feasible options to tackle the aforesaid problems to a remarkable extent. PMC has interesting advantages compared with free flame combustion due to the higher burning rates, the increased power dynamic range, the extension of the lean flammability limits, and the low emissions of pollutants. This article provides a comprehensive picture of the global scenario of research and developments in PMC and its applications that enable a researcher to decide the direction of further investigation. The works published so far in this area are reviewed, classified according to their objectives and presented in an organized manner with general conclusions. A separate section is devoted for the numerical modeling of PMC.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. Mapinfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenygaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
This study focuses to investigate the relationship between globalization and the ecological footprint for Malaysia from 1971 to 2014. The results of the Bayer and Hanck cointegration test and the ARDL bound test show the existence of cointegration among variables. The findings disclose that globalization is not a significant determinant of the ecological footprint; however, it significantly increases the ecological carbon footprint. Energy consumption and economic growth stimulate the ecological footprint and carbon footprint in Malaysia. Population density reduces the ecological footprint and carbon footprint. Further, financial development mitigates the ecological footprint. The causality results disclose the feedback hypothesis between energy consumption and economic growth in the long run and short run.
In this paper, an integrated thermoelectric (TE) and photovoltaic (PV) hybrid energy harvesting system (HEHS) is proposed for self-powered internet of thing (IoT)-enabled wireless sensor networks (WSNs). The proposed system can run at a minimum of 0.8 V input voltage under indoor light illumination of at least 50 lux and a minimum temperature difference, ∆T = 5 °C. At the lowest illumination and temperature difference, the device can deliver 0.14 W of power. At the highest illumination of 200 lux and ∆T = 13 °C, the device can deliver 2.13 W. The developed HEHS can charge a 0.47 F, 5.5 V supercapacitor (SC) up to 4.12 V at the combined input voltage of 3.2 V within 17 s. In the absence of any energy sources, the designed device can back up the complete system for 92 s. The sensors can successfully send 39 data string to the webserver within this time at a two-second data transmission interval. A message queuing telemetry transport (MQTT) based IoT framework with a customised smartphone application 'MQTT dashboard' is developed and integrated with an ESP32 Wi-Fi module to transmit, store, and monitor the sensors data over time. This research, therefore, opens up new prospects for self-powered autonomous IoT sensor systems under fluctuating environments and energy harvesting regimes, however, utilising available atmospheric light and thermal energy.
In this day and age, with the ever-growing population and energy demand, we should take the renewable option route in our energy source. We should also keep in mind that said energy should not cause any lasting environmental damage, one of the perfect example being solar energy. A country that is hot and sunny all year long is the perfect contributor to solar energy, case in point, Malaysia. With that in mind Solar Tree is designed and developed to facilitate consumers who need electric power at any place, anytime, anywhere. The objective of this study is to assess a mini project in the likes of Solar Tree that can generate electricity without harming the environment, despite the weather. Intended specifically to be a mini project, it is understandable that electricity generated is limited, with only up to 500W in total. As a trial, two electronic devices were tested, specifically a mobile phone and a laptop, as both devices are used almost every day. The data collected is then tabulated and analysed. It was concluded the solar tree developed proved efficient in charging both devices and will continue to do so given enough sunlight.
As fossil energy resources are depleting quick and energy security is playing a vital role in the world economy. Quest for alternative energy sources have turned researches investigation in waste foods for next generation fuel. Biodiesel is usually considered to be environmentally friendly as it reduces greenhouse gas emission. Fish wastes rich in fatty acids and can be used as the raw material to produce biodiesel through transesterification reaction. The results showed that the seven peaks are fatty acid methyl esters, indicating all the triglycerides were successfully methylated to methyl esters. Fish based biodiesel provided a significant reduction in carbon monoxide (CO) and hydrocarbon (HC) emissions under engine loads of 15 (Nm) and required no engine modification. The viscosity of the produced biodiesel was within the range of international standards (ASTM). The biodiesel was found to contain a low base number and exhibited a lower specific fuel consumption compared to the conventional diesel. It can be concluded that biodiesel derived from waste fish oil can be considered as a potential source of commercial biodiesel.
The present study reveals the perspective and challenges of bio-ethanol production from lignocellulosic materials in Malaysia. Malaysia has a large quantity of lignocellulosic biomass from agriculture waste, forest residues and municipal solid waste. In this work, the current status in Malaysia was laconically elucidated, including an estimation of biomass availability with a total amount of 47,402 dry kton/year. Total capacity and domestic demand of second-generation bio-ethanol production in Malaysia were computed to be 26,161 ton/day and 6677 ton/day, respectively. Hence, it was proven that the country's energy demand can be fulfilled with bio-ethanol if lignocellulosic biomass were fully converted into bio-ethanol and 19% of the total CO(2) emissions in Malaysia could be avoided. Apart from that, an integrated national supply network was proposed together with the collection, storage and transportation of raw materials and products. Finally, challenges and obstacles in legal context and policies implementation were elaborated, as well as infrastructures shortage and technology availabilities.
Oil palm is widely grown in Malaysia. Palm oil has attracted the attention of researchers to develop an 'environmentally friendly' and high quality fuel, free of nitrogen and sulfur. In the present study, the catalytic cracking of palm oil to biofuel was studied over REY catalyst in a transport riser reactor at atmospheric pressure. The effect of reaction temperature (400-500 degrees C), catalyst/palm oil ratio (5-10) and residence time (10-30s) was studied over the yield of bio-gasoline and gas as fuel. Design of experiments was used to study the effect of operating variables over conversion of palm oil and yield of hydrocarbon fuel. The response surface methodology was used to determine the optimum value of the operating variables for maximum yield of bio-gasoline fraction in the liquid product obtained.
This study investigates the energy security and income roles in testing environmental Kuznets curve (EKC) for developing countries from 1990 to 2019. The panel quantile regression approaches are employed to examine the relationship between the variables, considering that income and energy security effects on carbon emissions may vary across distributions. Findings revealed that the EKC hypothesis was inconsistent at low and high quantiles when estimating energy availability, affordability, and acceptability. The validity of inverted U-shaped EKC is supported at high quantiles for energy affordability and accessibility in developing countries. However, given the energy accessibility and acceptability, the EKC hypothesis becomes invalid in developing countries. Notably, developing countries have yet to progress toward achieving energy security as a switch component to low carbon emissions. This study contributes to the literature by revealing the effect of availability, accessibility, affordability, and acceptability of energy security on carbon dioxide emissions (CO2). Thus, it suggests implications for improving environmental quality in developing countries by enhancing energy security. Diversifying energy sources with nuclear, renewable, and developing technologies reduces dependence risks on a single source while improving efficiency through technology and demand management lowers carbon emissions and strengthens energy security. Beyond energy security, this study emphasises sustainable urban planning to promote compact development, effective transportation, and green infrastructure to reduce energy use and improve environmental sustainability, ultimately reducing carbon emissions.
The continuous growth in global population and the ongoing development of countries such as China and India have contributed to a rapid increase in worldwide energy demand. Fossil fuels such as oil and gas are finite resources, and their current rate of consumption cannot be sustained. This, coupled with fossil fuels' role as pollutants and their contribution to global warming, has led to increased interest in alternative sources of energy production. Bioethanol, presently produced from energy crops, is one such promising alternative future energy source and much research is underway in optimizing its production. The economic and temporal constraints that crop feedstocks pose are the main downfalls in terms of the commercial viability of bioethanol production. As an alternative to crop feedstocks, significant research efforts have been put into utilizing algal biomass as a feedstock for bioethanol production. Whilst the overall process can vary, the conversion of biomass to bioethanol usually contains the following steps: (i) pretreatment of feedstock; (ii) hydrolysis; and (iii) fermentation of bioethanol. This paper reviews different technologies utilized in the pretreatment and fermentation steps, and critically assesses their applicability to bioethanol production from algal biomass. Two different established fermentation routes, single-stage fermentation and two-stage gasification/fermentation processes, are discussed. The viability of algal biomass as an alternative feedstock has been assessed adequately, and further research optimisation must be guided toward the development of cost-effective scalable methods to produce high bioethanol yield under optimum economy.
Bioethanol is a very environmentally friendly liquid biofuel that is not only renewable, but also sustainable. It is currently
deemed as a highly suitable additive and substitute energy source to replace fossil based fuel. In this study, bioethanol
was produced from sago hampas by using commercial amylase, cellulase and Saccharomyces cerevisiae via sequential
saccharification and simultaneous fermentation (SSSF), a modified version of the simultaneous saccharification and
fermentation (SSF) process. SSSF was performed on sago hampas at 2.5 and 5.0% (w/v) feedstock load for five days. The
samples taken from the SSSF broths were analysed via high performance liquid chromatography (HPLC) for ethanol, glucose
and acetic acid production. From the results obtained, SSSF with 5.0% sago hampas loading exhibited the highest ethanol
production at 14.13 g/L (77.43% of theoretical ethanol yield), while SSSF using 2.5% sago hampas loading produced
ethanol at 6.45 g/L (69.24% of theoretical ethanol yield). This study has shown that ethanol not only can be produced
from sago hampas using different enzyme mixtures and S. cerevisiae via SSSF, but yields were also high, making this
process highly promising for the production of cheap and sustainable ethanol as fuel.
Alternative energy policies targeting the adoption of hydrogen fuel cell vehicles (HFCVs) could have significant positive impacts on Malaysia's ability to meet both its carbon reduction goal and its energy security needs. The transport sector generally contributes heavily to carbon emissions, and is also difficult to decarbonize because of the costs associated with many greener options. This study explores the possibility of decarbonizing the Malaysian transport sector by promoting the use of hydrogen vehicles, and analyzes the adoption challenges and economic obstacles (especially public acceptance) associated with introducing HFCVs. This study contends that the adoption challenges of this new technology can be overcome through the use of development strategies outlined. This study also addresses the regulatory framework that Malaysia (and other countries) might use to overcome common policy adoption challenges of HFCVs.
We report the draft genome sequence of Variovorax boronicumulans strain c24, which was isolated from a soil-inoculated chemostat culture amended with phenol as a sole carbon and energy source. The genome data will provide insights into phenol and other xenobiotic compound degradation mechanisms for bioremediation applications.
Pseudomonas sp. LAB-08 was isolated from a phenol-fed bioreactor constructed with contaminated aquifer soil as the inoculum. Strain LAB-08 utilized phenol as a sole carbon and energy source. Here, we report the genome sequence and annotation of Pseudomonas sp. LAB-08.
The energy-growth nexus has important policy implications for economic development. The results from many past studies that investigated the causality direction of this nexus can lead to misleading policy guidance. Using data on China from 1953 to 2013, this study shows that an application of causality test on the time series of energy consumption and national output has masked a lot of information. The Toda-Yamamoto test with bootstrapped critical values and the newly proposed non-linear causality test reveal no causal relationship. However, a further application of these tests using series in different time-frequency domain obtained from wavelet decomposition indicates that while energy consumption Granger causes economic growth in the short run, the reverse is true in the medium term. A bidirectional causal relationship is found for the long run. This approach has proven to be superior in unveiling information on the energy-growth nexus that are useful for policy planning over different time horizons.
Increasing energy use, climate change, and carbon dioxide (CO2) emissions from fossil fuels make switching to low-carbon fuels a high priority. Biofuels are a potential low-carbon energy source, but whether biofuels offer carbon savings depends on how they are produced. Converting rainforests, peatlands, savannas, or grasslands to produce food crop-based biofuels in Brazil, Southeast Asia, and the United States creates a "biofuel carbon debt" by releasing 17 to 420 times more CO2 than the annual greenhouse gas (GHG) reductions that these biofuels would provide by displacing fossil fuels. In contrast, biofuels made from waste biomass or from biomass grown on degraded and abandoned agricultural lands planted with perennials incur little or no carbon debt and can offer immediate and sustained GHG advantages.
Energy is an indispensable factor for the economic growth and development of a country. Energy consumption is rapidly increasing worldwide. To fulfill this energy demand, alternative energy sources and efficient utilization are being explored. Various sources of renewable energy and their efficient utilization are comprehensively reviewed and presented in this paper. Also the trend in research and development for the technological advancement of energy utilization and smart grid system for future energy security is presented. Results show that renewable energy resources are becoming more prevalent as more electricity generation becomes necessary and could provide half of the total energy demands by 2050. To satisfy the future energy demand, the smart grid system can be used as an efficient system for energy security. The smart grid also delivers significant environmental benefits by conservation and renewable generation integration.
Economic growth is a global requirement that requires extensive energy consumption, and this phenomenon needs researchers' attention and regulators' focus. Thereby, the paper scrutinizes the determinants of energy consumption such as fossil fuel energy consumption (FFEC), energy use, nuclear energy consumption (NEC), energy import, and renewable energy consumption (REC) and sustainability-oriented eco-innovation and their effectiveness on the economic growth of Saudi Arabia. The study extracted data from the World Bank from 1989 to 2020. Stationarity was examined using augmented Dickey-Fuller (ADF) tests, and the associations among constructs were analyzed through QARDL model. The findings revealed that FFEC, EU, NEC, EI, REC, and sustainability-oriented eco-innovation are significantly correlated with the EG of Saudi Arabia. The study also provides insights to new researchers who will investigate this area in the future and guides regulators in developing regulations related to economic growth using an appropriate level of energy and adoption of sustainability-oriented eco-innovation.
Among the wide range of renewable energy sources, the ever-increasing demand for electricity storage represents an emerging challenge. Utilizing carbon nanotubes (CNTs) for energy storage is closely being scrutinized due to the promising performance on top of their extraordinary features. In this work, well-aligned multilayer carbon nanotubes were successfully synthesized on a porous silicon (PSi) substrate in a fast process using renewable natural essential oil via chemical vapor deposition (CVD). Considering the influx of vaporized multilayer vertical carbon nanotubes (MVCNTs) to the PSi, the diameter distribution increased as the flow rate decreased in the reactor. Raman spectroscopy results indicated that the crystalline quality of the carbon nanotubes structure exhibits no major variation despite changes in the flow rate. Fourier transform infrared (FT-IR) spectra confirmed the hexagonal structure of the carbon nanotubes because of the presence of a peak corresponding to the carbon double bond. Field emission scanning electron microscopy (FESEM) images showed multilayer nanotubes, each with different diameters with long and straight multiwall tubes. Moreover, the temperature programmed desorption (TPD) method has been used to analyze the hydrogen storage properties of MVCNTs, which indicates that hydrogen adsorption sites exist on the synthesized multilayer CNTs.