MyMedR

Displaying publications 1 - 20 of 44 in total

Abstract:

Sort:

Fulltext Comparative evaluation of apical bacterial extrusion following root canal instrumentation using different endodontic file systems: An in vitro study

Vankayala B, Anantula K, Saladi H, Gudugunta L, Basavarajaiah JM, Yadav SS

J Conserv Dent, 2020 08 20;22(6):559-563.
PMID: 33088065 DOI: 10.4103/JCD.JCD_221_19

Aim: This study aims to evaluate the amount of apical extrusion of bacteria during root canal instrumentation using K3XF, Protaper Gold, Edge taper platinum, and Hyflex CM Rotary systems.
Materials and Methods: Sixty freshly extracted maxillary incisors teeth collected in saline. Access cavity prepared and canals were made free of bacterial and pulp. The teeth were mounted on the bacteria collecting apparatus. Root canals were contaminated with the Fusobacterium Nucleatum (ATCC25586) and dried at 37°C for 24 h. In Group 1 (Control group): No instrumentation was done and biomechanical preparation done in all other groups with Group 2: Hand K-files, Group 3: Protaper gold, Group 4: K3XF, Group 5: Edge taper platinum, and Group 6: Hyflex CM rotary file systems. Then, the extrude was collected, and it is incubated in Mueller-Hinton agar for 24 h and the number of colony forming units were counted and statistical comparison was done using Kruskal-Wallis test and Mann-Whitney U test.
Results: Hand K-files extruded more bacteria when compared to other four rotary systems, K3XF file system extruded least number of bacteria.
Conclusion: All instrumentation techniques extruded intracanal bacteria apically. However, engine-driven nickel-titanium instruments extruded less bacteria than the manual technique. The K3XF rotary file system comparatively extruded less bacteria than other rotary file systems.

Matched MeSH terms: Platinum
Fulltext Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes

Zhang X, Wu X, Centeno A, Ryan MP, Alford NM, Riley DJ, et al.

Sci Rep, 2016;6:23364.
PMID: 26997140 DOI: 10.1038/srep23364

Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures. The photocathode of Au@CZTS nanostructures exhibits enhanced optical absorption characteristics and improved incident photon-to-current efficiency (IPCE) performance. It is demonstrated that using this photocathode there is a significant increase of the power conversion efficiency (PCE) of a photoelectrochemical solar cell of 100% compared to using a CZTS without Au core. More importantly, the PCE of Au@CZTS photocathode improved by 15.8% compared to standard platinum (Pt) counter electrode. The increased efficiency is attributed to plasmon resonance energy transfer (PRET) between the Au nanoparticle core and the CZTS shell at wavelengths shorter than the localized surface plasmon resonance (LSPR) peak of the Au and the semiconductor bandgap.

Matched MeSH terms: Platinum
Fulltext Effect of nickel and platinum addition on the thixotopic behaviour of lead-free solder paste

Durairaj, R., Leong, K.C., Chia Wea, L., Wong, M.C.

ASM Science Journal, 2011;5(2):109-114.
MyJurnal

Lead-free solder paste printing processes account for the majority of assembly defects in the electronic manufacturing industry. In the stencil printing process, the solder paste must be able to withstand low and high shear rates which result in continuous structural breakdown and build-up. This study investigated the effect of the addition of nickel and platinum powders to the thixotropic behaviour of lead-free Sn/Ag/Cu solder pastes using the structural kinetic model. A hysteresis loop test and constant shear test were utilized to investigate the thixotropic behaviour of the pastes using parallel plate rheometry at 25ºC. In this study, the shear rates were increased from 0.01 s–1 to 10 s–1 and the second curve was a result of decreasing the shear rate from 10 s–1 to 0.01 s–1. For the constant shear test, the samples were subjected to five different shear rates of 0.01s–1, 0.1s–1, 1s–1, 10s–1 and 100s–1. The constant shear rate test was designed to study the structural breakdown and build-up of the paste materials. From this investigation, the hysteresis loop test was shown to be an effective test method to differentiate the extent of structural recovery in the solder pastes. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux that prohibited paste flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitated the flow of pastes, thus viscosity was reduced at high shear rate.

Matched MeSH terms: Platinum
Fulltext SnO2/Pt thin film laser ablated gas sensor array

Shahrokh Abadi MH, Hamidon MN, Shaari AH, Abdullah N, Wagiran R

Sensors (Basel), 2011;11(8):7724-35.
PMID: 22164041 DOI: 10.3390/s110807724

A gas sensor array was developed in a 10 × 10 mm(2) space using Screen Printing and Pulse Laser Ablation Deposition (PLAD) techniques. Heater, electrode, and an insulator interlayer were printed using the screen printing method on an alumina substrate, while tin oxide and platinum films, as sensing and catalyst layers, were deposited on the electrode at room temperature using the PLAD method, respectively. To ablate SnO(2) and Pt targets, depositions were achieved by using a 1,064 nm Nd-YAG laser, with a power of 0.7 J/s, at different deposition times of 2, 5 and 10 min, in an atmosphere containing 0.04 mbar (4 kPa) of O(2). A range of spectroscopic diffraction and real space imaging techniques, SEM, EDX, XRD, and AFM were used in order to characterize the surface morphology, structure, and composition of the films. Measurement on the array shows sensitivity to some solvent and wood smoke can be achieved with short response and recovery times.

Matched MeSH terms: Platinum/chemistry
Substrate effects on surface morphologies and magnetic properties of nanostructured FePt thin films

Low PL, Yong BE, Ong BH, Matsumoto M, Tou TY

J Nanosci Nanotechnol, 2011 Mar;11(3):2640-3.
PMID: 21449444

The substrate effects on surface morphologies, crystal structures, and magnetic properties of the sputter-deposited FePt thin films on Corning 1737, normal glass, and Si wafer substrates, respectively, were investigated. High in-plane coercivities of 10 kOe were obtained for the air-annealed films on Corning 1737 and Si wafer, where both films similarly have granular-like morphologies. Besides, increasing grain size and surface roughness of all the FePt films with the post-anneal temperature were observed. Moreover, partially separated grains were seen in the film on Si wafer, where the formation of Fe silicides during post-anneal is suspected, in which has enhanced the magnetic ordering.

Matched MeSH terms: Platinum/chemistry*
Morphological study of synthesized RGO/ Pt nanocomposites via facile chemical reduction method

Mohamad Fahrul Radzi Hanifah, Juhana Jaafar, Madzlan Aziz, Mohd Hafiz Dzarfan Othman, Mukhlis A. Rahman, Ahmad Fauzi Ismail, et al.

Sains Malaysiana, 2017;46:629-635.

Reduced graphene oxide nanosheet (RGO)/Pt nanocomposite have been successfully prepared through a facile chemical reduction method. The reduction of Pt precursor was carried out using sodium borohydride as the efficient chemical reductant. The morphology of RGO/Pt nanocomposite was investigated using high resolution transmission electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM). HRTEM analysis showed that platinum nanoparticles were homogenously distributed onto the surface of RGO. The electrochemical study proved that Pt nanoparticles were successfully incorporated onto RGO. Therefore, it can be concluded that the proposed method could provide well-dispersed of Pt nanoparticles onto RGO to form RGO/ Pt nanocomposite.

Matched MeSH terms: Platinum
Genetic polymorphisms as potential pharmacogenetic biomarkers for platinum-based chemotherapy in non-small cell lung cancer

Sito H, Tan SC

Mol Biol Rep, 2024 Jan 13;51(1):102.
PMID: 38217759 DOI: 10.1007/s11033-023-08915-2

Platinum-based chemotherapy (PBC) is a widely used treatment for various solid tumors, including non-small cell lung cancer (NSCLC). However, its efficacy is often compromised by the emergence of drug resistance in patients. There is growing evidence that genetic variations may influence the susceptibility of NSCLC patients to develop resistance to PBC. Here, we provide a comprehensive overview of the mechanisms underlying platinum drug resistance and highlight the important role that genetic polymorphisms play in this process. This paper discussed the genetic variants that regulate DNA repair, cellular movement, drug transport, metabolic processing, and immune response, with a focus on their effects on response to PBC. The potential applications of these genetic polymorphisms as predictive indicators in clinical practice are explored, as are the challenges associated with their implementation.

Matched MeSH terms: Platinum/therapeutic use
Pembrolizumab monotherapy versus chemotherapy in platinum-pretreated, recurrent or metastatic nasopharyngeal cancer (KEYNOTE-122): an open-label, randomized, phase III trial

Chan ATC, Lee VHF, Hong RL, Ahn MJ, Chong WQ, Kim SB, et al.

Ann Oncol, 2023 Mar;34(3):251-261.
PMID: 36535566 DOI: 10.1016/j.annonc.2022.12.007

BACKGROUND: Pembrolizumab previously demonstrated robust antitumor activity and manageable safety in a phase Ib study of patients with heavily pretreated, programmed death ligand 1 (PD-L1)-positive, recurrent or metastatic nasopharyngeal carcinoma (NPC). The phase III KEYNOTE-122 study was conducted to further evaluate pembrolizumab versus chemotherapy in patients with platinum-pretreated, recurrent and/or metastatic NPC. Final analysis results are presented.
PATIENTS AND METHODS: KEYNOTE-122 was an open-label, randomized study conducted at 29 sites, globally. Participants with platinum-pretreated recurrent and/or metastatic NPC were randomly assigned (1 : 1) to pembrolizumab or chemotherapy with capecitabine, gemcitabine, or docetaxel. Randomization was stratified by liver metastasis (present versus absent). The primary endpoint was overall survival (OS), analyzed in the intention-to-treat population using the stratified log-rank test (superiority threshold, one-sided P = 0.0187). Safety was assessed in the as-treated population.
RESULTS: Between 5 May 2016 and 28 May 2018, 233 participants were randomly assigned to treatment (pembrolizumab, n = 117; chemotherapy, n = 116); Most participants (86.7%) received study treatment in the second-line or later setting. Median time from randomization to data cut-off (30 November 2020) was 45.1 months (interquartile range, 39.0-48.8 months). Median OS was 17.2 months [95% confidence interval (CI) 11.7-22.9 months] with pembrolizumab and 15.3 months (95% CI 10.9-18.1 months) with chemotherapy [hazard ratio, 0.90 (95% CI 0.67-1.19; P = 0.2262)]. Grade 3-5 treatment-related adverse events occurred in 12 of 116 participants (10.3%) with pembrolizumab and 49 of 112 participants (43.8%) with chemotherapy. Three treatment-related deaths occurred: 1 participant (0.9%) with pembrolizumab (pneumonitis) and 2 (1.8%) with chemotherapy (pneumonia, intracranial hemorrhage).
CONCLUSION: Pembrolizumab did not significantly improve OS compared with chemotherapy in participants with platinum-pretreated recurrent and/or metastatic NPC but did have manageable safety and a lower incidence of treatment-related adverse events.

Matched MeSH terms: Platinum*
Fulltext Development of a hydrogen gas sensor using a double SAW resonator system at room temperature

Yunusa Z, Hamidon MN, Ismail A, Mohd Isa M, Yaacob MH, Rahmanian S, et al.

Sensors (Basel), 2015;15(3):4749-65.
PMID: 25730480 DOI: 10.3390/s150304749

A double SAW resonator system was developed as a novel method for gas sensing applications. The proposed system was investigated for hydrogen sensing. Commercial Surface Acoustic Wave (SAW) resonators with resonance frequencies of 433.92 MHz and 433.42 MHz were employed in the double SAW resonator system configuration. The advantages of using this configuration include its ability for remote measurements, and insensitivity to vibrations and other external disturbances. The sensitive layer is composed of functionalized multiwalled carbon nanotubes and polyaniline nanofibers which were deposited on pre-patterned platinum metal electrodes fabricated on a piezoelectric substrate. This was mounted into the DSAWR circuit and connected in parallel. The sensor response was measured as the difference between the resonance frequencies of the SAW resonators, which is a measure of the gas concentration. The sensor showed good response towards hydrogen with a minimum detection limit of 1%.

Matched MeSH terms: Platinum
Fulltext Influence of dose on particle size and optical properties of colloidal platinum nanoparticles

Gharibshahi E, Saion E

Int J Mol Sci, 2012;13(11):14723-41.
PMID: 23203091 DOI: 10.3390/ijms131114723

Attempts to produce colloidal platinum nanoparticles by using steady absorption spectra with various chemical-based reduction methods often resulted in the fast disappearance of the absorption maxima leaving reduced platinum nanoparticles with little information on their optical properties. We synthesized colloidal platinum nanoparticles in an aqueous solution of polyvinyl pyrrolidone by gamma radiolytic reduction method, which produced steady absorption spectra of fully reduced and highly pure platinum nanoparticles free from by-product impurities or reducing agent contamination. The average particle size was found to be in the range of 3.4–5.3 nm and decreased with increasing dose due to the domination of nucleation over ion association in the formation of metal nanoparticles by the gamma radiolytic reduction method. The platinum nanoparticles exhibit optical absorption spectra with two absorption peaks centered at about 216 and 264 nm and the peaks blue shifted to lower wavelengths with decreasing particle size. The absorption spectra of platinum nanoparticles were also calculated using quantum mechanical treatment and coincidently a good agreement was obtained between the calculated and measured absorption peaks at various particle sizes. This indicates that the 216 and 264-nm absorption peaks of platinum nanoparticles conceivably originated from the intra-band transitions of conduction electrons of (n = 5, l = 2) and (n = 6, l = 0) energy states respectively to higher energy states. The absorption energies, i.e., conduction band energies of platinum nanoparticles derived from the absorption peaks increased with increasing dose and decreased with increasing particle size.

Matched MeSH terms: Platinum/chemistry*
Fulltext A successful case of endovascular treatment (EVT) of anterior communicating artery aneurysm associated with moyamoya disease

Sobri, M.A., Noorakmal, A., Razali, R.

Malaysian Journal of Medicine and Health Sciences, 2012;8(1):73-76.
MyJurnal

Saccular aneurysms associated with moyamoya disease are commonly located in the vertebrobasilar circulation. Anterior circulation aneurysm associated with moyamoya disease is uncommon and is usually treated by neurosurgical clipping. Objective: We report a succesful treatment using the endovascular approach in a case of ruptured anterior communicating artery aneurysm in unilateral moyamoya disease. Clinical Presentation: A 23 year old man presented with a 5 day history of headache, diplopia and fever. Computed Tomography (CT) scan and cerebral angiogram showed a bilobed anterior comunicating artery aneurysm. There was also severe M1 segment stenosis of the left middle cerebral artery with multiple collaterals, representing moyamoya vessels. Intervention: Treatment was done under general anesthesia and followed the standard practice for endovascular treatment. The aneurysm was occluded with three detachable platinum microcoils (Microplex®, Microvention®). Conclusion: Endovascular treatment can be a treatment option for ruptured anterior circulation saccular aneurysms associated with moyamoya disease.

Matched MeSH terms: Platinum
Fulltext A review: electrochemical performance of LSCF composite cathodes – influence of Ceria Electrolyte and metal elements

Bakar, M. S. A., Ahmad, S., Muchtar, A., Rahman, H. A .

Journal of Advanced Review on Scientific Research, 2014;1(1):1-9.
MyJurnal

Solid oxide fuel cells (SOFC) are efficient and clean power generation devices. Lowtemperature
SOFC (LTSOFC) has been developed since high-temperature SOFC (HTSOFC) is not
feasible to be commercialized due to cost. Lowering the operation temperature reduces its substantial
performance resulting from cathode polarization resistance and overpotential of cathode. The
development of composite cathodes regarding mixed ionic-electronic conductor (MIEC) and ceriabased
materials for LTSOFC minimizes the problems significantly and leads to an increase in
electrocatalytic activity for the occurrence of oxygen reduction reaction (ORR). Lanthanum-based
materials such as lanthanum strontium cobalt ferrite (La0.6Sr0.4Co0.2Fe0.8O3-δ) have been discovered
recently, which offer great compatibility with ceria-based electrolyte to be applied as composite
cathode materials for LTSOFC. Cell performance at lower operating temperature can be maintained
and further improved by enhancing the ORR. This paper reviews recent development of various ceriabased
composite cathodes especially related to the ceria-carbonate composite electrolytes for
LTSOFC. The influence of the addition of metallic elements such as silver (Ag), platinum (Pt) and
palladium (Pd) towards the electrochemical properties and performance of LSCF composite cathodes
are also discussed.

Matched MeSH terms: Platinum
Neuroendocrine carcinoma of the cervix: Review of classification and current developments in diagnosis and management

Kavitha Nagandla, Sharifah Sulaiha, Sivalingam Nalliah, Norfadzilah Mohd Yusof

International e-Journal of Science, Medicine & Education, 2017;11(1):2-11.
MyJurnal

Neuroendocrine carcinoma of the female
reproductive tract are a heterogeneous group of rare
neoplasms posing both diagnostic and therapeutic
challenges. The recent classification by WHO
includes neuroendocrine carcinomas (NECs) and
neuroendocrine tumours (NETs). NECs are the poorly
differentiated small cell carcinoma (SCNEC) and
large cell neuroendocrine carcinoma (LCNEC), while
well-differentiated NETs include typical carcinoids
(TC) and atypical carcinoids (AC). Majority of
these tumours have an aggressive clinical course and
published data is supportive of multi-modal therapeutic
strategies. Etoposide/platinum based chemotherapy is
commonly advocated. Histopathological categorisation
and diagnosis are paramount to guide therapy.
Well-differentiated carcinoid and atypical
carcinoid tumours should be managed similar to
gastroenteropancreatic neuroendocrine tumours.
This review discusses the current classification, clinicpathologic
characteristics and advances in the diagnostic
evaluation and the treatment options of neuroendocrine
carcinoma of the cervix.

Matched MeSH terms: Platinum
A synergistic heterostructured ZnO/BaTiO3 loaded carbon photoanode in photocatalytic fuel cell for degradation of Reactive Red 120 and electricity generation

Ong YP, Ho LN, Ong SA, Banjuraizah J, Ibrahim AH, Lee SL, et al.

Chemosphere, 2019 Mar;219:277-285.
PMID: 30543963 DOI: 10.1016/j.chemosphere.2018.12.004

Photocatalytic fuel cell (PFC) is considered as a sustainable green technology which could degrade organic pollutant and generate electricity simultaneously. A synergistic double-sided ZnO/BaTiO3 loaded carbon plate heterojunction photoanode was fabricated in different ratios by using simple ultrasonication and mixed-annealed method. The double-sided design of photoanode allowed the lights irradiated at both sides of the photoanode. The ferroelectricity fabricated photoanode was applied in a membraneless PFC with platinum-loaded carbon as the cathode. Results revealed that the photoanode with 1:1 ratio of BaTiO3 and ZnO exhibited a superior photocatalytic activity among all the photoanodes prepared in this study. The heterojunction of this photoanode was able to achieve up to a removal efficiency of 93.67% with a maximum power density of 0.5284 μW cm-2 in 10 mg L-1 of Reactive Red 120 (RR120) without any supporting electrolyte. This photoanode was able to maintain at high performance after recycling 3 times. Overloading of ZnO above 50% on BaTiO3 could lead to deterioration of the performance of PFC due to the charge defects and light trapping ability. The interactions, interesting polarizations of the photocatalysts and proposed mechanism of the n-n type heterojunction in the photoanode of ZnO/BaTiO3 was also discussed.

Matched MeSH terms: Platinum
Role of dissolved oxygen on the degradation mechanism of Reactive Green 19 and electricity generation in photocatalytic fuel cell

Lee SL, Ho LN, Ong SA, Wong YS, Voon CH, Khalik WF, et al.

Chemosphere, 2018 Mar;194:675-681.
PMID: 29247929 DOI: 10.1016/j.chemosphere.2017.11.166

In this study, a membraneless photocatalytic fuel cell with zinc oxide loaded carbon photoanode and platinum loaded carbon cathode was constructed to investigate the impact of dissolved oxygen on the mechanism of dye degradation and electricity generation of photocatalytic fuel cell. The photocatalytic fuel cell with high and low aeration rate, no aeration and nitrogen purged were investigated, respectively. The degradation rate of diazo dye Reactive Green 19 and the electricity generation was enhanced in photocatalytic fuel cell with higher dissolved oxygen concentration. However, the photocatalytic fuel cell was still able to perform 37% of decolorization in a slow rate (k = 0.033 h-1) under extremely low dissolved oxygen concentration (approximately 0.2 mg L-1) when nitrogen gas was introduced into the fuel cell throughout the 8 h. However, the change of the UV-Vis spectrum indicates that the intermediates of the dye could not be mineralized under insufficient dissolved oxygen level. In the aspect of electricity generation, the maximum short circuit current (0.0041 mA cm-2) and power density (0.00028 mW cm-2) of the air purged photocatalytic fuel cell was obviously higher than that with nitrogen purging (0.0015 mA cm-2and 0.00008 mW cm-2).

Matched MeSH terms: Platinum
Determination of HOMO and LUMO of [6,6]-Phenyl C61-butyric Acid 3-ethylthiophene ester and poly (3-octyl-thiophene-2, 5-diyl) through voltametry characterization

Ashkan Shafiee, Muhamad Mat Salleh, Muhammad Yahaya

Sains Malaysiana, 2011;40.

HOMO and LUMO of organic compounds are basic parameters for the design and fabrication of an organic solar cell. This paper presents a technique to obtain HOMO and LUMO of an n-type polymer of [6,6]-phenyl C61-butyric acid 3-ethylthiophene ester (PCBE) and a p-type polymer of poly (3-octyl-thiophene-2, 5-diyl) (P3OT). The energy of band gap for each material has been calculated using optical absorption spectrum. Cyclic Voltammetry was used to estimate the oxidation potential and energy band diagram consequently. The experiments were carried out in a three-electrode cell consisting of a platinum working electrode, a platinum counter electrode and a SCE reference electrode. P3OT showed energy band gap equal to 1.83 eV with HOMO and LUMO equal to 5.59 eV and 3.76 eV, respectively. PCBE showed energy band gap equal to 1.96 eV with HOMO and LUMO equal to 5.87 eV and 3.91 eV, respectively. Based on energy band diagram that was constructed from this experimental result, the couple materials may be successfully used to fabricate the feasible organic solar cells.

Matched MeSH terms: Platinum
The effect of oleic acid stabilizer on the surface properties of bimetallic PtNi catalysts

Abu Bakar NH, Abu Bakar M, Bettahar MM, Ismail J, Monteverdi S

J Nanosci Nanotechnol, 2013 Jul;13(7):5034-43.
PMID: 23901527

A detailed study on the surface properties of oleic acid-stabilized PtNi nanoparticles supported on silica is reported. The oleic acid-stabilized PtNi nanoparticles were synthesized using NaBH4 as the reducing agent at various temperatures and oleic acid concentrations, prior to incorporation onto the silica support. X-ray diffraction studies of the unsupported oleic acid-stabilized PtNi particles revealed that the PtNi existed as alloys. Upon incorporation onto silica support, surface properties of the catalysts were investigated using H2-temperature reduction (H2-TPR), H2-temperature desorption (H2-TPD) and H2-chemisorption techniques. It was found that for the bimetallic catalysts, no oxides or very little oxidation occurred. Furthermore, these catalysts exhibited both Pt and Ni active sites on its surface though the availability of Ni active sites was dominant. A comparison of the surface properties of these materials with those prepared without oleic acid in our previous work [N. H. H. Abu Bakar et al., J. Catal. 265, 63 (2009)] and how they affect the hydrogenation of benzene is also discussed.

Matched MeSH terms: Platinum/chemistry*
Perbandingan hasil pengoksidaan elektrokimia etanol dalam larutan alkali yang menggunakan elektrod platinum-polivinilklorida (Pt-PVC) dan kepingan logam Pt

Riyanto, Jumat Salimon, Mohamed Rozali Othman

Sains Malaysiana, 2007;36:175-181.

Elektrod platinum-polivinilklorida (Pt-PVC) untuk pengoksidaan elektrokimia etanol dalam larutan alkali telah direkabentuk. Elektrod Pt-PVC dibina dengan mencampurkan serbuk-serbuk logam platinum dengan PVC (95:5 w/w), diaduk untuk mendapatkan campuran yang homogen, ditambahkan dengan tetrahidrofuran (THF) untuk melarutkan PVC, dikeringkan, dimasukkan ke dalam acuan berdiameter 1 cm dan ditekan pada tekanan kira-kira 10 tan/cm2. Kajian elektrokimia dilakukan menggunakan voltammetri kitaran (CV) dan kronokoulometri (CC). CV untuk etanol yang menggunakan elektrod-elektrod kepingan logam Pt dan Pt-PVC masing-masing memberikan ketumpatan arus 0.25 mA/cm2 dan 85 mA/cm2 untuk puncak penjerapan hidroksida. Ini menunjukkan bahawa elektrod Pt-PVC mempunyai nilai konduktiviti dan perilaku elektrokimia yang lebih baik untuk pengoksidaan etanol dalam KOH berbanding elektrod kepingan logam Pt. Hasil kajian mendapati bahawa terdapat peningkatan peratus hasil elektrolisis dari 3.64% kepada 23.64% asid asetik apabila elektrod Pt-PVC digunakan untuk pengoksidaan elektrokimia 0.25 M etanol dalam larutan elektrolit 1.0 M KOH menggantikan elektrod kepingan logam Pt.

Matched MeSH terms: Platinum
Determining the type of bond between diatomic cluster of platinum and hydrogen: quantum mechanical approach

Anas M, Gopir G, Miswan M

Sains Malaysiana, 2018;47:999-1003.

Type of bond is vital to understand the mechanism of interaction between corresponds atoms. We used three kinds of method
to determine the type of bond between diatomic cluster of platinum and hydrogen: types of element, electronegativity
and electron distribution. In this work, we found that the results from these three methods are not unanimously agreed
with each other for bond type forming in platinum-hydrogen diatomic cluster. Thus, we conclude that the type of bond
is hybrid of both: mainly covalent and slightly ionic.

Matched MeSH terms: Platinum
Combining Copper and Zinc into a Biosensor for Anti-Chemoresistance and Achieving Osteosarcoma Therapeutic Efficacy

Lim YY, Zaidi AMA, Miskon A

Molecules, 2023 Mar 24;28(7).
PMID: 37049685 DOI: 10.3390/molecules28072920

Due to its built-up chemoresistance after prolonged usage, the demand for replacing platinum in metal-based drugs (MBD) is rising. The first MBD approved by the FDA for cancer therapy was cisplatin in 1978. Even after nearly four and a half decades of trials, there has been no significant improvement in osteosarcoma (OS) therapy. In fact, many MBD have been developed, but the chemoresistance problem raised by platinum remains unresolved. This motivates us to elucidate the possibilities of the copper and zinc (CuZn) combination to replace platinum in MBD. Thus, the anti-chemoresistance properties of CuZn and their physiological functions for OS therapy are highlighted. Herein, we summarise their chelators, main organic solvents, and ligand functions in their structures that are involved in anti-chemoresistance properties. Through this review, it is rational to discuss their ligands' roles as biosensors in drug delivery systems. Hereafter, an in-depth understanding of their redox and photoactive function relationships is provided. The disadvantage is that the other functions of biosensors cannot be elaborated on here. As a result, this review is being developed, which is expected to intensify OS drugs with higher cure rates. Nonetheless, this advancement intends to solve the major chemoresistance obstacle towards clinical efficacy.

Matched MeSH terms: Platinum/pharmacology

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links