Displaying publications 1 - 20 of 27 in total

Abstract:
Sort:
  1. Medication prescribing patterns among chronic kidney disease patients in a hospital in Malaysia
    Al-Ramahi R
    Saudi J Kidney Dis Transpl, 2012 Mar;23(2):403-8.
    PMID: 22382249
    To determine the medication prescribing patterns in hospitalized patients with chronic kidney disease (CKD) in a Malaysian hospital, we prospectively studied a cohort of 600 patients in two phases with 300 patients in each phase. The first phase was carried out from the beginning of February to the end of May 2007, and the second phase was from the beginning of March to the end of June 2008. Patients with CKD who had an estimated creatinine clearance ≤ 50 mL/min and were older than 18 years were included. A data collection form was used to collect data from the patients' medical records and chart review. All systemic medications prescribed during hospitalization were included. The patients were prescribed 5795 medications. During the first phase, the patients were prescribed 2814 medication orders of 176 different medications. The prescriptions were 2981 of 158 medications during the second phase. The mean number of medications in the first and second phases was 9.38 ± 3.63 and 9.94 ± 3.78 respectively (P-value = 0.066). The top five used medications were calcium carbonate, folic acid/vitamin B complex, metoprolol, lovastatin, and ferrous sulfate. The most commonly used medication classes were mineral supplements, vitamins, antianemic preparations, antibacterials, and beta-blocking agents. This study provides an overview of prescription practice in a cohort of hospitalized CKD patients and indicates possible areas of improvement in prescription practice.
    Matched MeSH terms: Ferrous Compounds/therapeutic use
  2. Cation dependence, pH tolerance, and dosage requirement of a bioflocculant produced by Bacillus spp. UPMB13: flocculation performance optimization through kaolin assays
    Zulkeflee Z, Aris AZ, Shamsuddin ZH, Yusoff MK
    ScientificWorldJournal, 2012;2012:495659.
    PMID: 22997497
    A bioflocculant-producing bacterial strain with highly mucoid and ropy colony morphological characteristics identified as Bacillus spp. UPMB13 was found to be a potential bioflocculant-producing bacterium. The effect of cation dependency, pH tolerance and dosage requirement on flocculating ability of the strain was determined by flocculation assay with kaolin as the suspended particle. The flocculating activity was measured as optical density and by flocs formation. A synergistic effect was observed with the addition of monovalent and divalent cations, namely, Na⁺, Ca²⁺, and Mg²⁺, while Fe²⁺ and Al³⁺ produced inhibiting effects on flocculating activity. Divalent cations were conclusively demonstrated as the best cation source to enhance flocculation. The bioflocculant works in a wide pH range, from 4.0 to 8.0 with significantly different performances (P < 0.05), respectively. It best performs at pH 5.0 and pH 6.0 with flocculating performance of above 90%. A much lower or higher pH would inhibit flocculation. Low dosage requirements were needed for both the cation and bioflocculant, with only an input of 50 mL/L for 0.1% (w/v) CaCl₂ and 5 mL/L for culture broth, respectively. These results are comparable to other bioflocculants produced by various microorganisms with higher dosage requirements.
    Matched MeSH terms: Ferrous Compounds/chemistry
  3. Antioxidant capacity of fresh and processed fruit bodies and mycelium of Auricularia auricula-judae (Fr.) Quél
    Kho YS, Vikineswary S, Abdullah N, Kuppusamy UR, Oh HI
    J Med Food, 2009 Feb;12(1):167-74.
    PMID: 19298211 DOI: 10.1089/jmf.2007.0568
    Auricularia auricula-judae is currently grown in Malaysia. In the present study, the methanolic extracts from fruit bodies (fresh, oven-dried, and freeze-dried) and mycelium of A. auricula-judae were evaluated for their antioxidant capacities based on 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity and ferric reducing antioxidant power (FRAP) assay. The total phenolic content in the extracts were also measured. The extract of freeze-dried fruit bodies of A. auricula-judae had potent DPPH free radical scavenging activity with a 50% effective concentration of 2.87 mg/mL, whereas the FRAP value of A. auricula-judae mycelium was 5.22 micromol of FeSO(4).7H(2)O equivalents/g of mycelium sample. Further, a positive correlation (R(2) = 0.7668) between FRAP level of A. auricula-judae extracts and the total phenolic contents was observed. Thus the method of processing of fresh fruit bodies had an effect on the antioxidant potential of A. auricula-judae.
    Matched MeSH terms: Ferrous Compounds
  4. Fulltext Date palm and goat milk improve haematological parameters and availability of functional iron in iron deficient rats
    Nurainna Abd Majid, Zuriani Zainol, Nor Aripin Shamaan, Nazefah Abd Hamid, Nuruliza Roslan, Noor Fadzilah Zulkifli
    Malaysian Journal of Medicine and Health Sciences, 2020;16(3):52-59.
    MyJurnal
    Introduction: Iron deficiency anaemia (IDA) is endemic especially in the under-developed and developing countries and is a major public health concern. Improving nutrition is one of the ways to alleviate this condition. Consumption of locally available and affordable food such as date palm and goat milk which are rich in iron is one of the ways to overcome IDA. This study is aimed at evaluating the effect of date palm and goat milk supplementation on hae- matological parameters and iron bioavailability in IDA rats. Methods: 24 male Wistar rats were randomly divided into normal control and IDA group. The normal control was fed with normal diet and water ad libitum while the IDA group were fed on iron-deficient diet for two weeks to induce iron deficiency. The IDA rats were further divided into subgroups; each being supplemented with date palm, goat milk, a combination of date palm and goat milk, and ferrous fumarate as positive control. Blood were collected after 28 days for haematological parameters and iron profile determination. Iron bioavailability was assessed using the haemoglobin regeneration efficiency (HRE) index. Data was analysed by Student T Test and ANOVA using SPSS 23.0 software with p value < 0.05 considered as sta- tistically significant. Results: Supplementation of date palm and goat milk for 28 days significantly improved Hb, RBC, PCV, MCV, MCH, serum iron and transferrin saturation (p
    Matched MeSH terms: Ferrous Compounds
  5. An iron oxide nanoworm hybrid on an interdigitated microelectrode silica surface to detect abdominal aortic aneurysms
    Yan G, Li Q, Hong X, Gopinath SCB, Anbu P, Li C, et al.
    Mikrochim Acta, 2021 05 11;188(6):185.
    PMID: 33977395 DOI: 10.1007/s00604-021-04836-8
    An abdominal aortic aneurysm (AAA) is abnormal swelling in the abdominal aorta and a prevalent life-threatening disease. This research introduces a new interdigitated microelectrode (IDME)-sensing surface modified by iron oxide nanoworms (IONWs) for detecting the AAA biomarker insulin-like growth factor-1 (IGF1). A sandwich pattern was formulated with the IGF1 aptamer and IGFBP1 (IGF binding protein-1) on the IONW-constructed IDME hybrid to identify IGF1. The surface morphology of the IONWs revealed a uniform distribution of worm-like structures (80-100 nm) as confirmed by FESEM and FETEM analyses. Further, the presence of the major elements, Fe and O, was confirmed by EDX and XPS studies. The crystal planes that appeared in the IONW reflect cubic magnetite. IONW-modified IDME attained a limit of detection for IGF1 of 1 fM (3σ) with an aptamer-IGF1-IGFBP1 sandwich. This sandwich with IGFBP1 enhanced the current level at all concentrations of IGF1 and displayed linearity in the range 1 fM to 100 pM with a determination coefficient of R2 = 0.9373 [y = 3.38221x - 4.79]. Control experiments with complementary aptamer sequences, IGF2 and IGFBP3 did not show notable signal changes, indicating the specific detection of IGF1. This IONW constructed electrode helps to achieve the detection of low amounts of IGF1 and diagnose AAA at the stage prior to rupture.
    Matched MeSH terms: Ferrous Compounds/chemistry
  6. Fulltext Degradation and mineralization of phenol compounds with goethite catalyst and mineralization prediction using artificial intelligence
    Tisa F, Davoody M, Abdul Raman AA, Daud WM
    PLoS One, 2015;10(4):e0119933.
    PMID: 25849556 DOI: 10.1371/journal.pone.0119933
    The efficiency of phenol degradation via Fenton reaction using mixture of heterogeneous goethite catalyst with homogeneous ferrous ion was analyzed as a function of three independent variables, initial concentration of phenol (60 to 100 mg /L), weight ratio of initial concentration of phenol to that of H2O2 (1: 6 to 1: 14) and, weight ratio of initial concentration of goethite catalyst to that of H2O2 (1: 0.3 to 1: 0.7). More than 90 % of phenol removal and more than 40% of TOC removal were achieved within 60 minutes of reaction. Two separate models were developed using artificial neural networks to predict degradation percentage by a combination of Fe3+ and Fe2+ catalyst. Five operational parameters were employed as inputs while phenol degradation and TOC removal were considered as outputs of the developed models. Satisfactory agreement was observed between testing data and the predicted values (R2Phenol = 0.9214 and R2TOC= 0.9082).
    Matched MeSH terms: Ferrous Compounds/chemistry*
  7. Potential anticancer activity of protocatechuic acid loaded in montmorillonite/Fe3O4 nanocomposites stabilized by seaweed Kappaphycus alvarezii
    Yew YP, Shameli K, Mohamad SEB, Nagao Y, Teow SY, Lee KX, et al.
    Int J Pharm, 2019 Dec 15;572:118743.
    PMID: 31705969 DOI: 10.1016/j.ijpharm.2019.118743
    Superparamagnetic magnetite nanocomposites (Fe3O4-NCs) were successfully synthesized, which comprised of montmorillonite (MMT) as matrix support, Kappaphycus alvarezii (SW) as bio-stabilizer and Fe3O4 as filler in the composites to form MMT/SW/Fe3O4-NCs. Nanocomposite with 0.5 g Fe3O4 (MMT/SW/0.5Fe3O4) was selected for anticancer activity study because it revealed high crystallinity, particle size of 7.2 ± 1.7 nm with majority of spherical shape, and Ms = 5.85 emu/g with negligible coercivity. Drug loading and release studies were carried out using protocatechuic acid (PCA) as the model for anticancer drug, which showed 19% and 87% of PCA release in pH 7.4 and 4.8, respectively. Monolayer anticancer assay showed that PCA-loaded MMT/SW/Fe3O4 (MMT/SW/Fe3O4-PCA) had selectivity towards HCT116 (colorectal cancer cell line). Although MMT/SW/Fe3O4-PCA (0.64 mg/mL) showed higher IC50 than PCA (0.148 mg/mL) and MMT/SW/Fe3O4 (0.306 mg/mL, MMT/SW/Fe3O4-PCA showed more effective killing towards tumour spheroid model generated from HCT116. The IC50 for MMT/SW/Fe3O4-PCA, MMT/SW/Fe3O4 and PCA were 0.132, 0.23 and 0.55 mg/mL, respectively. This suggests the improved penetration efficiency and drug release of MMT/SW/Fe3O4-PCA towards HCT116 spheroids. Moreover, concentration that lower than 2 mg/mL MMT/SW/Fe3O4-PCA did not result any hemolysis in human blood, which suggests them to be ideal for intravenous injection. This study highlights the potential of MMT/SW/Fe3O4-NCs as drug delivery agent.
    Matched MeSH terms: Ferrous Compounds/chemistry*
  8. Fulltext Synthesis, characterization and biological properties of copper(II) and zinc(II) complexes against blood-stage Plasmodium falciparum
    Lai, Jing-Wei, Ng, Chew-Hee, Lim, Yvonne Ai-Lian, Mohd Jamil Maah
    Malaysian Journal of Medicine and Health Sciences, 2019;15(102):1-1.
    MyJurnal
    Introduction: The spread of multidrug-resistant malaria parasite – Plasmodium sp. to commercially available antimalarial drugs, i.e. artemisinin-based combination therapies (ACTs) and chloroquine (CQ), has become a global treat to eliminate malaria. To limit the impact of antimalarial drug resistance, a new potent and affordable alternative is urgently needed. A number of metal-based compounds (metallodrugs) have been found active against Plasmodium falciparum, the species that causes potentially fatal cerebral malaria, as they are ease in ligand grafting of multi-functional groups. Ferroquine (FQ) is one of the metalloantimalarial drugs that is currently undergoing clinical trials. Methods: In this study, a series of ternary copper(II) and zinc(II) complexes – Cu(phen)(edda) 1, Zn(phen)(edda) 2, [Cu(phen)(cdmg)] NO3 3 and [Zn(phen)(c-dmg)]NO3 4 were synthesized and characterized by the following tests: Fourier transformed infrared (FTIR), CHN elemental analysis, UV-Vis spectroscopy, molar conductivity and magnetic susceptibility measurements. Results: In vitro hemolytic and antimalarial assays using SYBR Green I dye were done to determine the biological properties of these complexes. Preliminary biological evaluation demonstrated that all the complexes 1, 2, 3 and 4 exhibit toxicity against the sensitive blood-stage Plasmodium falciparum 3D7 with IC50 in μM range. Conclusion: Thus, metal complex is a potentially viable candidate as antimalarial drug to overcome the emergence of drug resistance.
    Matched MeSH terms: Ferrous Compounds
  9. Fulltext Effectiveness of iron polymaltose complex in treatment and prevention of iron deficiency anemia in children: a systematic review and meta-analysis
    Mohd Rosli RR, Norhayati MN, Ismail SB
    PeerJ, 2021;9:e10527.
    PMID: 33520436 DOI: 10.7717/peerj.10527
    Background: Iron deficiency anemia (IDA) is commonly treated with iron formulations. Despite the expanding acceptance of iron polymaltose complex (IPC) among clinicians, there is sparse and contradictory evidence regarding its efficacy in the management of IDA in children. This systematic review and meta-analysis aimed to assess the effectiveness of IPC in the treatment and prevention of IDA in children.

    Methods: We searched the Cochrane Central Register of Controlled Trials, MEDLINE and Epistemonikos for all randomized control trials (RCTs) comparing oral IPC with standard oral iron supplementation for the treatment or prevention of IDA in children. We independently screened the titles and abstracts of identified trials before the full text of relevant trials was evaluated for eligibility. We then independently extracted data on the methods, interventions, outcomes, and risk of bias from the included trials. A random-effects model was used to estimate the risk ratios and mean differences with 95% confidence intervals.

    Results: Eight trials comprising 493 randomized patients were included and analyzed using three comparison groups. The comparison group of which was used to evaluate IPC and ferrous sulphate (FS) for treatment of IDA showed that IPC is less effective in increasing Hb (MD -0.81, 95% CI -1.08 to -0.53; I2 = 48%, P 

    Matched MeSH terms: Ferrous Compounds
  10. Fulltext Novel Mangosteen-Leaves-Based Marker Ink: Color Lightness, Viscosity, Optimized Composition, and Microstructural Analysis
    Mohd Basri MS, Liew Min Ren B, A Talib R, Zakaria R, Kamarudin SH
    Polymers (Basel), 2021 May 14;13(10).
    PMID: 34069259 DOI: 10.3390/polym13101581
    Dry mangosteen leaves are one of the raw materials used to produce marker ink. However, research using this free and abundant resource is rather limited. The less efficient one-factor-at-a-time (OFAT) approach was mostly used in past studies on plant-based marker ink. The use of statistical analysis and the regression coefficient model (mathematical model) was considered essential in predicting the best combination of factors in formulating mangosteen leaf-based marker ink. Ideally, ink should have maximum color lightness, minimum viscosity, and fast-drying speed. The objective of this study to study the effect of glycerol and carboxymethyl cellulose (CMC) on the color lightness and viscosity of mangosteen-leaves-based marker ink. The viscosity, color lightness, and drying properties of the ink were tested, the significant effect of glycerol and CMC (responses) on ink properties was identified and the prediction model on the optimum value of the responses was developed by using response surface methodology (RSM). The microstructure of mangosteen leaves was analyzed to study the surface morphology and cell structure during dye extraction. A low amount of glycerol used was found to increase the value of color lightness. A decrease in CMC amounts resulted in low viscosity of marker ink. The optimum formulation for the ink can be achieved when the weight percents of glycerol, benzalkonium chloride, ferrous sulphate, and CMC are set at 5, 5, 1, and 3, respectively. SEM micrographs showed the greatest amount of cell wall structure collapse on samples boiled with the lowest amount of glycerol.
    Matched MeSH terms: Ferrous Compounds
  11. Fulltext Pathology Associated with White Spot Virus (WSV) Infection in Wild Broodstock of Tiger Prawns (Penaeus monodon)
    Kua BC, Rashid NM
    Trop Life Sci Res, 2012 May;23(1):87-92.
    PMID: 24575228 MyJurnal
    A total of six wild broodstocks of tiger prawns, Penaeus monodon, were found positive for White Spot Virus (WSV) with an IQ2000 detection kit. Using histopathology, the intranuclear inclusion of haemocyte due to WSV infection was observed in the epithelium cells of the antennal gland, stomach and gills. This result confirmed that the wild broodstocks were positive with WSV without showing any white spot. Additionally, histopathological examination also revealed an accumulation of haemocytes around the hepatopancreatic tubules resulting from bacterial infection. Encapsulation and nodule formation, as well as related necrosis, were also observed around the hepatopancreatic tubules infected with a metazoan parasite. Encysted tylocephalum larval cestodes were observed in the hepatopancreas, with haemocytic aggregation being observed around the infected tubules. These findings showed some bacterial and parasitic infections which, in addition to the viral infection itself, could contribute to the 80% mortality rate in wild broodstocks infected with WSV.
    Matched MeSH terms: Ferrous Compounds
  12. Fulltext Environmental Remediation Potential of Ferrous Sulfate Waste as an Eco-Friendly Coagulant for the Removal of NH3-N and COD from the Rubber Processing Effluent
    Mohammad Ilias MK, Hossain MS, Ngteni R, Al-Gheethi A, Ahmad H, Omar FM, et al.
    Int J Environ Res Public Health, 2021 11 25;18(23).
    PMID: 34886153 DOI: 10.3390/ijerph182312427
    The present study was conducted to determine the potential of utilizing the FeSO4·7H2O waste from the titanium manufacturing industry as an effective coagulant for treating industrial effluent. In this study, the secondary rubber processing effluent (SRPE) was treated using ferrous sulfate (FeSO4·7H2O) waste from the titanium oxide manufacturing industry. The FeSO4·7H2O waste coagulation efficiency was evaluated on the elimination of ammoniacal nitrogen (NH3-N) and chemical oxygen demand (COD) from SRPE. The central composite design (CCD) of experiments was employed to design the coagulation experiments with varying coagulation time, coagulant doses, and temperature. The coagulation experiments were optimized on the optimal elimination of NH3-N and COD using response surface methodology (RSM). Results showed that coagulant doses and temperature significantly influenced NH3-N and COD elimination from SRPE. The highest NH3-N and COD removal obtained were 98.19% and 93.86%, respectively, at the optimized coagulation experimental conditions of coagulation time 70 min, coagulant doses 900 mg/L, and temperature 62 °C. The residual NH3-N and COD in treated SPRE were found below the specified industrial effluent discharge limits set by DoE, Malaysia. Additionally, the sludge generated after coagulation of SRPE contains essential plant nutrients. The present study's finding showed that FeSO4·7H2O waste generated as an industrial byproduct in a titanium oxide manufacturing industry could be utilized as an eco-friendly coagulant in treating industrial effluent.
    Matched MeSH terms: Ferrous Compounds
  13. The use of alum, ferric chloride and ferrous sulphate as coagulants in removing suspended solids, colour and COD from semi-aerobic landfill leachate at controlled pH
    Aziz HA, Alias S, Assari F, Adlan MN
    Waste Manag Res, 2007 Dec;25(6):556-65.
    PMID: 18229750
    Suspended solids, colour and chemical oxygen demand (COD) are among the main pollutants in landfill leachate. Application of physical or biological processes alone is normally not sufficient to remove these constituents, especially for leachate with a lower biochemical oxygen demand (BOD)/ COD ratio. The main objective of this research was to investigate the efficiency of coagulation and flocculation processes for removing suspended solids, colour and COD from leachate produced in a semi-aerobic landfill in Penang, Malaysia. A 12-month characterization study of the leachate indicated that it had a mean annual BOD/COD ratio of 0.15 and was partially stabilized, with little further biological degradation likely to occur. Particle size analysis of the raw leachate indicated that its 50th percentile (d50) was 11.68 microm. Three types of coagulants were examined in bench scale jar test studies: aluminium sulphate (alum), ferric chloride (FeCl3) and ferrous sulphate (FeSO4). The effects of agitation speed, settling time, pH, coagulant dosages and temperature were examined. At 300 rpm of rapid mixing, 50 rpm of slow mixing, and 60 min settling time, higher removals of suspended solids (over 95%), colour (90%) and COD (43%) were achieved at pH 4 and 12. FeCl3 was found to be superior to other coagulants tested. At pH 4 and 12, fair removal of suspended solids was observed at a reasonably low coagulant dose, i.e., 600 mg L(-1); hHowever, about 2500 mg L(-1) of coagulant was required to achieve good removals at pH 6. Better removals were achieved at higher temperature. The d50 of sludge after coagulation at pH 4 with a 2500 mg L(-1) FeCl3 dose was 60.16 microm, which indicated that the particles had been removed effectively from the leachate. The results indicate that coagulation and flocculation processes can be used effectively in integrated semi-aerobic leachate treatment systems, especially for removing suspended solids, colour and COD.
    Matched MeSH terms: Ferrous Compounds/analysis*
  14. Fulltext An amperometric biosensor utilizing a ferrocene-mediated horseradish peroxidase reaction for the determination of capsaicin (chili hotness)
    Mohammad R, Ahmad M, Heng LY
    Sensors (Basel), 2013 Aug 05;13(8):10014-26.
    PMID: 23921830 DOI: 10.3390/s130810014
    Chili hotness is very much dependent on the concentration of capsaicin present in the chili fruit. A new biosensor based on a horseradish peroxidase enzyme-capsaicin reaction mediated by ferrocene has been successfully developed for the amperometric determination of chili hotness. The amperometric biosensor is fabricated based on a single-step immobilization of both ferrocene and horseradish peroxidase in a photocurable hydrogel membrane, poly(2-hydroxyethyl methacrylate). With mediation by ferrocene, the biosensor could measure capsaicin concentrations at a potential 0.22 V (vs. Ag/AgCl), which prevented potential interference from other electroactive species in the sample. Thus a good selectivity towards capsaicin was demonstrated. The linear response range of the biosensor towards capsaicin was from 2.5-99.0 µM with detection limit of 1.94 µM. A good relative standard deviation (RSD) for reproducibility of 6.4%-9.9% was obtained. The capsaicin biosensor demonstrated long-term stability for up to seven months. The performance of the biosensor has been validated using a standard method for the analysis of capsaicin based on HPLC.
    Matched MeSH terms: Ferrous Compounds/chemistry*
  15. Fulltext Exosomes drive ferroptosis by stimulating iron accumulation to inhibit bacterial infection in crustaceans
    Sun Q, Yang J, Zhang M, Zhang Y, Ma H, Tran NT, et al.
    J Biol Chem, 2023 Dec;299(12):105463.
    PMID: 37977221 DOI: 10.1016/j.jbc.2023.105463
    Ferroptosis, characterized by iron-dependent cell death, has recently emerged as a critical defense mechanism against microbial infections. The present study aims to investigate the involvement of exosomes in the induction of ferroptosis and the inhibition of bacterial infection in crustaceans. Our findings provide compelling evidence for the pivotal role of exosomes in the immune response of crustaceans, wherein they facilitate intracellular iron accumulation and activate the ferroptotic pathways. Using RNA-seq and bioinformatic analysis, we demonstrate that cytochrome P450 (CYP) can effectively trigger ferroptosis. Moreover, by conducting an analysis of exosome cargo proteins, we have identified the participation of six-transmembrane epithelial antigen of prostate 4 in the regulation of hemocyte ferroptotic sensitivity. Subsequent functional investigations unveil that six-transmembrane epithelial antigen of prostate 4 enhances cellular Fe2+ levels, thereby triggering Fenton reactions and accelerating CYP-mediated lipid peroxidation, ultimately culminating in ferroptotic cell death. Additionally, the Fe2+-dependent CYP catalyzes the conversion of arachidonic acid into 20-hydroxyeicosatetraenoic acid, which activates the peroxisome proliferator-activated receptor. Consequently, the downstream target of peroxisome proliferator-activated receptor, cluster of differentiation 36, promotes intracellular fatty acid accumulation, lipid peroxidation, and ferroptosis. These significant findings shed light on the immune defense mechanisms employed by crustaceans and provide potential strategies for combating bacterial infections in this species.
    Matched MeSH terms: Ferrous Compounds/metabolism
  16. Facile synthesis of CaFe2O4 for visible light driven treatment of polluting palm oil mill effluent: Photokinetic and scavenging study
    Charles A, Khan MR, Ng KH, Wu TY, Lim JW, Wongsakulphasatch S, et al.
    Sci Total Environ, 2019 Apr 15;661:522-530.
    PMID: 30682605 DOI: 10.1016/j.scitotenv.2019.01.195
    In this paper, a facile synthesis method for CaFe2O4 is introduced that produces a catalyst capable of significant photocatalytic degradation of POME under visible light irradiation. The co-precipitation method was used to produce two catalysts at calcination temperatures of 550 °C and 700 °C dubbed CP550 and CP700. CP550 demonstrated the maximum COD removal of 69.0% at 0.75 g/L catalyst loading after 8 h of visible light irradiation which dropped to 61.0% after three consecutive cycles. SEM images indicated that the higher calcination temperature of CP700 led to annealing which reduced the pore volume (0.025 cm3/g) and pore diameter (10.3 nm) while simultaneously creating a smoother and more spherical surface with lower SBET (9.73 m2/g). In comparison, CP550 had a rough hair-like surface with higher SBET (27.28 m2/g) and pore volume (0.077 cm3/g) as evidenced by BET analysis. XRD data indicated the presence of CaFe5O7 in the CP550 composition which was not present in CP700. The presence of Wustite-like FeO structures in CaFe5O7 are likely the cause for lower photoluminescence intensity profile and hence better charge separation of CP550 as these structures in CaFe2O4 have been known to increase resistivity and electron localization. The COD removal of CP550 dropped from 69.0% to just 7.0% upon adding a small quantity of isopropanol into the reaction mixture indicating hydroxyl radicals as the primary reactive oxidative species.
    Matched MeSH terms: Ferrous Compounds
  17. Fulltext Correlation Between Composition and Electrodynamics Properties in Nanocomposites Based on Hard/Soft Ferrimagnetics with Strong Exchange Coupling
    Almessiere MA, Trukhanov AV, Slimani Y, You KY, Trukhanov SV, Trukhanova EL, et al.
    Nanomaterials (Basel), 2019 Feb 04;9(2).
    PMID: 30720737 DOI: 10.3390/nano9020202
    In this work, Sr0.3Ba0.4Pb0.3Fe12O19/(CuFe₂O₄)x (x = 2, 3, 4, and 5) as strongly exchange-coupled nanosized ferrites were fabricated using a one-pot sol⁻gel combustion method (citrate sol-gel method). The X-ray diffraction (XRD) powder patterns of the products confirmed the occurrence of pure, exchange-coupled ferrites. Frequency dependencies of the microwave characteristics (MW) were investigated using a co-axial method. The non-linear behavior of the MW with the composition transformation may be due to different degrees of Fe ion oxidation on the spinel/hexaferrite grain boundaries and strong exchange coupling during the hard and soft phases.
    Matched MeSH terms: Ferrous Compounds
  18. Penspesiesan Ion-ion Ferum dengan Resin Poli (Asid Hidroksamik)(Speciation of Iron Ions Using Poly(Hydroxamic Acid)) Resin
    Wan Md Zin Wan Yunus, Md Jelas Haron
    Sains Malaysiana, 1996;25.
    Poly(hydroxamic acid) ion exchange resin was evaluated for speciation of iron(II) and iron(III) ions. Distribution coefficients indicate that the resin is more selective towards iron(III) ion. Column extractions show that iron(III) ion is quantatively extracted from sulfuric acid solutions at concentrations of between 0.01 to 0.00lM but only 2% or less of iron(II) ion is retained under these conditions. Further studies show that these two ions can be separated and their separations are not affected by the presence of nickel, zinc, copper, calcium, chloride, bromide, nitrate and sulphate.
    Resin penukar ion poli(asid hidroksamik) telah dikaji untuk penspesiesan ion-ionferum. Pekali taburan menunjukkan resin ini mempunyai kepilihan yang tinggi terhadap ion ferik berbanding dengan ionferus. Pengekstrakan dengan kaedah turus mendapati ion ferik dari larutan asid sulfurik 0.01 dan 0.00lM boleh diesktrak secara kuantitatif manakala pengekstrakan ion ferus hanya 2% atau lebih kecil. Kajian lanjut menunjukkan resin ini boleh memisahkan ion ferik dari ion ferus dan pemisahan ini tidak diganggu oleh kehadiran ion-ion nikel, zink, kuprum, kalsium, klorida, bromida, nitrat dan sulfat.
    Matched MeSH terms: Ferrous Compounds
  19. Surface analysis of marine sulphate-reducing bacteria exopolymers on steel during biocorrosion using x-ray photoelectron spectroscopy
    Fathul Karim Sahrani, Madzlan Abd. Aziz, Zaharah Ibrahim, Adibah Yahya
    Sains Malaysiana, 2008;37.
    The aim of this study was to determine the surface chemistry during biocorrosion process on growth and on the production of exopolymeric substances (EPS) in batch cultures of mix-strains of marine sulphate-reducing bacteria (SRB) isolated from Malaysian Shipyard and Engineering Harbours, Pasir Gudang. The EPS and precipitates were analyzed by x-ray photoelectron spectroscopy (XPS). The XPS results indicate that Fe(2p3/2) spectrum for iron sulphide can be fitted with Fe(II) and Fe(III) components, both corresponding to Fe-S bond types. The absence of oxide oxygen in the O(1s) spectrum and Fe(III)-O bond types in the Fe(2p3/2) spectrum supports the conclusion that iron sulphides are composed of both ferric and ferrous iron coordinated with monosulphide and disulphide.
    Matched MeSH terms: Ferrous Compounds
  20. Safety and toxicological evaluation of ferrocenium tetrachloroantimonate for use as an antimalarial agent
    Nurhidanatasha Abu Bakar, Zainal Abidin Abu Hasan, Nurul Izza Nordin, Bohari Mohamad Yamin
    Sains Malaysiana, 2007;36:39-44.
    Ferrocene plays an important role in chemistry and industry. The structure and bonding discovered in ferrocene has led to new developments in organometallic chemistry, and the discovery of entirely new organometallic compounds. The high stability of this compound is also related to its interesting electrochemical properties that makes it effective electrochemical, reduction and combustion catalysts. Nevertheless, ferrocenyl derivatives are also capable of enhancing the activity of certain biological compounds. Indeed, recently ferrocene and its derivatives have been incorporated into antimalarial agents. Therefore, the evaluation of the possible toxic effects of ferrocene derivative called ferrocenium tetrachloroantimonate (C10H10FeSbCl4 or FC) on acute and subchronic toxicity tests using different dose concentrations according to the body weight for different time interval was carried out in an in vivo model. Results showed that FC was acutely toxic with the LD50 value of 194.70 mg/kg body weight (BW) with signs of toxicity associated with respiratory depression. In the 28-day acute toxicity test, the dose of 100 mg/kg BW resulted in 60 % mortality with signs of gross toxicity, adverse pharmacological effects or abnormal behaviors during the 28 days observation. While in the 90-day subchronic toxicity test at the lower dose of 10 mg/kg BW, however, showed no significant differences (p>0.05) in the mortality rates, and showed no sign of toxicity. These results indicated that FC had different toxicity levels, and mice appeared to tolerate well at the lower dose of 10 mg/kg BW.
    Matched MeSH terms: Ferrous Compounds
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links