Displaying publications 1 - 20 of 75 in total

Abstract:
Sort:
  1. Zailina, H., Junidah, R., Jamal Hisham, H.
    MyJurnal
    Blood lead concentration and 6»aminolevulinic acid in urine were used as indicator for lead exposure among school children in an industrial area south of the peninsular Malaysia. A group of 1 00 Malay children which consist of 48 boys and 52 girb with the age range of 61/2 to 81/2 years from a primary school were selected as chiMren. Blood samples were collected and analyzed with Graphite Furnace Atomic Absorption Spectrophotometer. The urine 6-aminolevulinic acid concentrations were measured with UV/VIS Spectrophotometer. The mean blood lead was 3.75ug/dl. Based on the biological index, 76% of the children are in the “normal range" (
    Matched MeSH terms: Spectrophotometry, Atomic
  2. Yusof AM, Rahman NA, Wood AK
    Biol Trace Elem Res, 1994;43-45:239-49.
    PMID: 7710833
    Trace elements, such as As, Co, Cr, Hg, Sb, and Zn, were determined by neutron activation analysis (NAA), whereas Cd, Cu, and Pb were determined by graphite furnace atomic absorption spectroscopy (GFAAS) in clam, crab, prawn, swamp cerith, and mussel samples after digestion by microwave heating under controlled conditions before eluting the solutions through a column of a chelating resin, Chelex-100. The standard used in the determination of percentage volatile elements retained by microwave digestion and also in the activation process was Lobster Hepatopancreas TORT-1, whereas known mixed standards were prepared from nitrate salts to determine the efficiency of the separation procedure at a controlled pH. Mercury and lead detected in crabs exceeded the maximum permissible level. Some species also showed a high affinity toward certain elements, and their levels of accumulation in the tissues of these species corresponded with the concentration of these elements in sediments, especially at sites in the vicinity of an industrial zone.
    Matched MeSH terms: Spectrophotometry, Atomic
  3. Wong MK, Koh LL
    Biol Trace Elem Res, 1986 Aug;10(2):91-7.
    PMID: 24254355 DOI: 10.1007/BF02795561
    Ninety-nine samples of common Chinese medicines were purchased from Chinese medical shops in Singapore and Malaysia and analyzed for mercury, lead, copper, cadmium, cobalt, iron, and nickel. The majority of these medicines were manufactured in China, Hong Kong, and Malaysia. A few of them were of Singapore and Taiwan origin. Atomic absorption method (both flame and flameless) was used for the analyses. Mercury was found to be present in high concentrations in several of the medicines that were for oral consumption.
    Matched MeSH terms: Spectrophotometry, Atomic
  4. Wolswijk G, Satyanarayana B, Le QD, Siau YF, Ali ANB, Saliu IS, et al.
    Data Brief, 2020 Apr;29:105134.
    PMID: 32016142 DOI: 10.1016/j.dib.2020.105134
    This paper presents the results of mercury analysis on 786 abiotic (surface sediments) and biotic (plant and animal tissues) samples collected from 10 sites at Matang Mangrove Forest Reserve in Peninsular Malaysia. Sediment samples were collected at the surface level from both river bank and forest understory. Whereas plant tissues obtained from Rhizophora apiculata Blume and Rhizophora mucronata L. consisted of leaves (in four stages namely young, mature, senescent and decomposing), bark and roots (divided into xylem, cortex and epidermis), the animal samples were represented by muscle tissue of the gastropod Cassidula aurisfelis Bruguière and the cockle Tegillarca granosa L. The mercury concentration measurements were obtained through a cold vapor atomic absorption spectrometer. The core data have been analysed and interpreted in the paper "Distribution of mercury in sediments, plant and animal tissues in Matang Mangrove Forest Reserve, Malaysia" [1].
    Matched MeSH terms: Spectrophotometry, Atomic
  5. Wbin-Wan-Ibrahim WA, Mirza EH, Akbar Ali SF
    Pak J Pharm Sci, 2013 Jul;26(4):823-6.
    PMID: 23811465
    Heavy metals in cigarette tobacco such as iron may cause a serious damage on human health. Surveys showed that the accumulation of certain toxic heavy metals like cadmium, mercury, iron is very often due to the effect of smoking. This work involved 15 volunteers in two randomly divided groups having the habit of cigarette smoking over 15 cigarettes / day. Concentration level of iron in blood and urine before and after treatment using the herbal medicine, widely used in Europe, is analyzed. Determination of Iron concentration in blood and urine was calculated by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) according to the procedure DIN EN ISO 11885 ("E22" from April 1998). The analysis shows that the concentration of iron in blood and urine samples in both groups increased in some volunteers instead of decrease. The independent T-test shows that the mean of iron concentration in the group A and group B had no significant difference (p>0.05). The results suggested that the herbal medicine under test does not have significant influence on reduction of iron concentration levels.
    Matched MeSH terms: Spectrophotometry, Atomic
  6. Udechukwu BE, Ismail A, Zulkifli SZ, Omar H
    Environ Sci Pollut Res Int, 2015 Mar;22(6):4242-55.
    PMID: 25292304 DOI: 10.1007/s11356-014-3663-4
    Sungai Puloh mangrove estuary supports a large diversity of macrobenthic organisms and provides social benefits to the local community. Recently, it became a major recipient of heavy metals originating from industries in the hinterland as a result of industrialization and urbanization. This study was conducted to evaluate mobility and pollution status of heavy metals (Cd, Cu, Ni, Pb, Zn, and Fe) in intertidal surface sediments of this area. Surface sediment samples were collected based on four different anthropogenic sources. Metals concentrations were analyzed using an atomic absorption spectrophotometer (AAS). Results revealed that the mean concentrations were Zn (1023.68 ± 762.93 μg/g), Pb (78.8 ± 49.61 μg/g), Cu (46.89 ± 43.79 μg/g), Ni (35.54 ± 10.75 μg/g), Cd (0.94 ± 0.29 μg/g), and Fe (7.14 ± 0.94%). Most of the mean values of analyzed metals were below both the interim sediment quality guidelines (ISQG-low and ISQG-high), except for Pb concentration (above ISQG-low) and Zn concentration (above ISQG-high), thus suggesting that Pb and Zn may pose some environmental concern. Cadmium, Pb, and Zn concentrations were above the threshold effect level (TEL), indicating seldom adverse effect of these metals on macrobenthic organisms. Pollution load index (PLI) indicated deterioration and other indices revealed the intertidal surface sediment is moderately polluted with Cd, Pb, and Zn. Therefore, this mangrove area requires urgent attention to mitigate further contamination. Finally, this study will contribute to data sources for Malaysia in establishing her own ISQG since it is a baseline study with detailed contamination assessment indices for surface sediment of intertidal mangrove area.
    Matched MeSH terms: Spectrophotometry, Atomic
  7. Tan, Y.P., Wong, Y.C.
    MyJurnal
    Bismuth chromium solid solutions, with a general formula Bi6-xCr2Oδ, where -1 ≤ x ≤ 2, were successfully synthesized via the conventional solid state method. The phases of the synthesized samples were determined by X-ray diffraction (XRD) analysis. The properties of single-phase compounds were characterized by using differential thermal analysis (DTA), thermal gravimetric analysis (TGA), AC impedance spectroscopy, and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The occurrence of phase transitions was confirmed by DTA and TGA, where a thermal event was observed by DTA at around 800oC. In addition, TGA studies also showed that there was a weight loss at around 800oC. Elemental analysis of Bi6Cr2O15 and its solid solutions by ICP-AES showed a good agreement between the expected value and the experimental value on the compositions, with no evidence of any systematic deviation from stoichiometric. Electrical properties of Bi6Cr2O15 and its solid solutions were investigated by using AC impedance spectroscopy from 300oC to 650oC. Ionic conductivity increased with the increasing temperature and bismuth content, and the best ionic conductivity was observed for Bi7Cr2O16.5. The activation energy (Ea) of Bi6Cr2O15 and its solid solutions were in the range of 1.22-1.32 eV.
    Matched MeSH terms: Spectrophotometry, Atomic
  8. Sow AY, Ismail A, Zulkifli SZ
    Bull Environ Contam Toxicol, 2013 Jul;91(1):6-12.
    PMID: 23666324 DOI: 10.1007/s00128-013-1009-4
    Livers and muscles of swamp eels (Monopterus albus) were analyzed for bioaccumulation of heavy metals during the plowing stage of a paddy cycle. Results showed heavy metals were bioaccumulated more highly in liver than muscle. Zinc (Zn) was the highest bioaccumulated metal in liver (98.5 ± 8.95 μg/g) and in muscle (48.8 ± 7.17 μg/g). The lowest bioaccumulated metals were cadmium (Cd) in liver (3.44 ± 2.42 μg/g) and copper (Cu) in muscle (0.65 ± 0.20 μg/g). In sediments, Zn was present at the highest mean concentration (52.7 ± 2.85 μg/g), while Cd had the lowest mean concentration (1.04 ± 0.24 μg/g). The biota-sediment accumulation factor (BSAF) for Cu, Zn, Cd and nickel (Ni) in liver tissue was greater than the corresponding BSAF for muscle tissue. For the three plowing stages, metal concentrations were significantly correlated between liver and muscle tissues in all cases, and between sediment and either liver or muscle in most cases. Mean measured metal concentrations in muscle tissue were below the maximum permissible limits established by Malaysian and U.S. governmental agencies, and were therefore regarded as safe for human consumption.
    Matched MeSH terms: Spectrophotometry, Atomic
  9. Solayman M, Islam MA, Paul S, Ali Y, Khalil MI, Alam N, et al.
    Compr Rev Food Sci Food Saf, 2016 Jan;15(1):219-233.
    PMID: 33371579 DOI: 10.1111/1541-4337.12182
    Honey is a popular natural food product with a very complex composition mainly consisting of both organic and inorganic constituents. The composition of honey is strongly influenced by both natural and anthropogenic factors, which vary based on its botanical and geographical origins. Although minerals and heavy metals are minor constituents of honey, they play vital role in determining its quality. There are several different analytical methods used to determine the chemical elements in honey. These methods are typically based on spectroscopy or spectrometry techniques (including atomic absorption spectrometry, atomic emission spectrometry, inductively coupled plasma mass spectrometry, and inductively coupled plasma optical emission spectrometry). This review compiles available scientific information on minerals and heavy metals in honey reported from all over the world. To date, 54 chemical elements in various types of honey have been identified and can be divided into 3 groups: major or macroelements (Na, K, Ca, Mg, P, S, Cl), minor or trace elements (Al, Cu, Pb, Zn, Mn, Cd, Tl, Co, Ni, Rb, Ba, Be, Bi, U, V, Fe, Pt, Pd, Te, Hf, Mo, Sn, Sb, La, I, Sm, Tb, Dy, Sd, Th, Pr, Nd, Tm, Yb, Lu, Gd, Ho, Er, Ce, Cr, As, B, Br, Cd, Hg, Se, Sr), and heavy metals (trace elements that have a specific gravity at least 5 times higher than that of water and inorganic sources). Chemical elements in honey samples throughout the world vary in terms of concentrations and are also influenced by environmental pollution.
    Matched MeSH terms: Spectrophotometry, Atomic
  10. Shukor MY, Tham LG, Halmi MI, Khalid I, Begum G, Syed MA
    J Environ Biol, 2013 Sep;34(5):967-70.
    PMID: 24558814
    Near-real-ime assay is anassay method that the whole process from sampling until results could be obtained in approximately Iess than one hour. The ElIman assay for acetyl cholinesterase (AChE) has near real-time potential due to its simplicity and fast assay time. The commercial acetylcholinesterase from Electrophorus electricus is well known for its uses in insecticides detection. A lesser known fact is AChE is also sensitive to heavy metals. A near real-time inhibitive assay for heavy metals using AChE from this source showed promising results. Several heavy metals such as copper, silver and mercury could be etected with IC50 values of1.212, 0.1185 and 0.097 mg I-1, respectively. The Limits of Detection (LOD) for copper, silver and mercury were 0.01, 0.015 and 0.01 mg I-1, respectively. TheLimits of quantitation (LOQ) or copper, silver and mercury were 0.196, 0.112 and 0.025 mg I-1, respectively. The LOQvalues for copper, silver and mercury were well below the maximum permissible limit for these metal ions as outlined by Malaysian Department of Environment. A polluted location demonstrated near real-time applicability of the assay with variation oftemporal levels of heavy metals detected. The results show that AChE from Electrophorus electricus has the potential to be used as a near real-time biomonitoring tool for heavy
    Matched MeSH terms: Spectrophotometry, Atomic
  11. Shimi, G., Hasnah, H.
    MyJurnal
    This study aimed to determine the effect of cooking on phytate content and the inhibitory effects of phytate on the bioavailability of minerals in eight Malaysian soy based dishes. Phytate was analyzed by using anion-exchange chromatography while minerals were analyzed by using Atomic Absorption Spectrophotometer. Molar ratios were obtained by dividing the mole of phytate to minerals. Phytate content was reduced in cooked dishes compared to the raw ones but it was not significantly different (P > 0.05). Raw, cooked and whole dish soy products contained 257.14-900.00, 182.14-803.57 and 289.29-910.71 mg/100 g phytate, respectively. Boiling and steaming have reduced most phytate content in the food samples. Molar ratios for phytate/minerals in these samples (phytate/Ca >0.17; phytate/Fe >1) indicated that phytate content inhibited the absorption of calcium and iron. However, the ratio for Ca × phytate/Zn in all samples was less than 200 which showed that phytate did not affect the bioavailability of zinc.
    Matched MeSH terms: Spectrophotometry, Atomic
  12. Shantakumari Rajan, Nur Safiyyah Ishak
    Sains Malaysiana, 2017;46:1825-1830.
    The concentrations of the heavy metal in Pacific white shrimp (Litopenaeus vannamei) purchased from the local wet markets throughout the state of Selangor were investigated using flame atomic absorption spectrometry. The order of the heavy metal concentrations were Zn>Cu>Pb>Cd, whereby the metal concentrations in most samples exceeded the limits of the Malaysian Food Regulation, 1985 and the guidelines set by the Food and Agriculture Organisation (1983). A health risk analysis based on the mean target hazard quotient (THQ) yielded values <1 for all metals for average and maximal consumers. The total THQ (tTHQ) which measures the aggregated risk due to heavy metal uptake via the ingestion of L. vannamei was 0.124 and 0.372 for average and maximal consumers, respectively. This suggests that although the metal concentrations are exceeding the limit, there is no calculated significant risk from metal toxicity by the consumption of shrimp.
    Matched MeSH terms: Spectrophotometry, Atomic
  13. Shamsul, B.S., Zakirah, M.
    MyJurnal
    The main objective of this study is to determine the association between respirable hexavalent chromium compounds with urinary β2-microglobulin levels among welders in an automotive components manufacturing plant. 49 welders and 39 workers involved in stamping process were selected as the exposed and the comparative group. β2-microglobulin is a protein renal tubular dysfunction marker that can indicate renal dysfunction caused by heavy metal. Air samples of worker’s breathing zone were collected using personal air sampling pump and filter papers. Filter papers were then diluted and analysed with Atomic Absorption Spectrophotometry (AAS). Workers’ urine samples were collected at the end of 8-hour work shift and analysed with β2-microglobulin ELISA Kit (IBL-Hamburg) and a microtiter reader. Meanwhile, creatinine levels were analysed with creatinine test strips and Reflotron®. A mean concentration of respirable hexavalent chromium compounds in air for the exposed group was 0.135 ± 0.043μg/m3 while for the non-exposed group was 0.124 ± 0.029μg/m3. The mean level of urinary β2-microglobulin per creatinine for the exposed group was 84.996 ± 39.246μg/g while that of the comparative group was 61.365 ± 21.609μg/g. The concentrations of respirable hexavalent chromium compounds were higher in the exposed group compared to the comparative group (Z=-2.444, p=0.015). β2-microglobulin level was also higher in the exposed group compared to the non-exposed group (t=3.821, p=
    Matched MeSH terms: Spectrophotometry, Atomic
  14. Shamsul, B.S., How Pai, S.
    MyJurnal
    Homocysteine could be a mechanism that underlies the effects of lead on cardiovascular system. This study aims to identify the relationship between lead exposure and homocysteine levels among workers. A comparative cross-sectional study was carried out on 80 workers of an automotive components manufacturing factory; that comprised of 40 exposed workers and 40 non-exposed workers. Blood samples of respondents were taken by fingerprick. The blood samples were analyzed for blood lead concentration by using Atomic Absorption Spectrometry Graphite Furnace Model GBC 908AA. Besides that, ELISA Kit was used to show the homocysteine level among the respondents. Questionnaires were used to obtain demography information of respondents. Results from the statistical analysis showed that the mean blood lead concentration for exposed respondents was 5.53±4.74 μg/dL and 3.53±2.81 μg/dL for the comparative respondents. Mann-Whitney U test showed that there was no significance difference between the mean blood lead concentration of the exposed and comparative group (z=-1.178; p=0.075). The blood lead concentration ranged 0.68-17.95 among the exposed group and with a range of 0.084-11.96 for the comparative group. The mean homocysteine level (μmol/L) was 32.48±2.481μmol/L for the exposed group and 16.50±4.0960 μmol/L for the comparative group. There was a significant difference in homocysteine level (μmol/L) between the exposed (32.48±2.481) and comparative (16.50±4.0959) groups (z = -7.699, p
    Matched MeSH terms: Spectrophotometry, Atomic
  15. Shameli K, Bin Ahmad M, Zargar M, Yunus WM, Ibrahim NA, Shabanzadeh P, et al.
    Int J Nanomedicine, 2011;6:271-84.
    PMID: 21499424 DOI: 10.2147/IJN.S16043
    Silver nanoparticles (AgNPs) of a small size were successfully synthesized using the wet chemical reduction method into the lamellar space layer of montmorillonite/chitosan (MMT/Cts) as an organomodified mineral solid support in the absence of any heat treatment. AgNO3, MMT, Cts, and NaBH4 were used as the silver precursor, the solid support, the natural polymeric stabilizer, and the chemical reduction agent, respectively. MMT was suspended in aqueous AgNO3/Cts solution. The interlamellar space limits were changed (d-spacing = 1.24-1.54 nm); therefore, AgNPs formed on the interlayer and external surface of MMT/Cts with d-average = 6.28-9.84 nm diameter. Characterizations were done using different methods, ie, ultraviolet-visible spectroscopy, powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray fluorescence spectrometry, and Fourier transform infrared spectroscopy. Silver/montmorillonite/chitosan bionanocomposite (Ag/MMT/Cts BNC) systems were examined. The antibacterial activity of AgNPs in MMT/Cts was investigated against Gram-positive bacteria, ie, Staphylococcus aureus and methicillin-resistant S. aureus and Gram-negative bacteria, ie, Escherichia coli, E. coli O157:H7, and Pseudomonas aeruginosa by the disc diffusion method using Mueller Hinton agar at different sizes of AgNPs. All of the synthesized Ag/MMT/Cts BNCs were found to have high antibacterial activity. These results show that Ag/MMT/Cts BNCs can be useful in different biological research and biomedical applications, including surgical devices and drug delivery vehicles.
    Matched MeSH terms: Spectrophotometry, Atomic
  16. Shafie, O., Sanimah, A.R.
    MyJurnal
    The status ofhve l1eavy metals: cadmium, lead copper, zinc and mercury were determined in seafood and its products imported_ti·om Thailand via Bukit Kayu Hiram, Kedah, Flame Atomic Absorption Spectrophotometer was used to determine the level of these heary metals except for mercury, where the cold vapor technique was used, Randomized sampling was done according to a predetermined sampling plan based on the previous years consignments. Data collected were compared with the maximum permitted level of -metal contaminants in fish and fish products- ofthe Fourteenth Schedule (Regulation 38) of Food Act I983 and Food Regulations I 985 to ascertain compliance. lt was noted form this study, that the level of metals detected in seafood and its products had a very wide range, The levels detected for cadmium was at a range of 0. 00] - 3.9/2, 0.07 — 0.29, 0,04 - 4,4 mg/kg in fish, shellfish and cuttlefish respectivelv. In general, cadmium level in some samples was notably higher particularly in shellfish. All samples had lead level less than the permitted value except for fish where the highest value detected was 3.28 mg/kg. The level of copper and zinc was higher than the permitted value in octopus, prawn and crab, Mercury level in all samples analvzed was found to be below the detection level. As for fish samples, zinc level was found to be higher whereas copper was within the limit. However, it was also noted that the level of all the heavy metals in jiozen jish was within the permitted limit.
    Matched MeSH terms: Spectrophotometry, Atomic
  17. Sein HH, Whye Lian C, Juan Loong K, Sl Ng J, Rahardjai A, Sultan MA
    Malays J Med Sci, 2014 Sep-Oct;21(5):30-6.
    PMID: 25977631 MyJurnal
    BACKGROUND: This study aimed to determine the intracellular (red blood cell (RBC)) magnesium levels in children with chronic bronchial asthma and to determine the relationship between the magnesium level and peak expiratory flow rate (PEFR), type of asthma treatment, and level of asthma control.
    METHODS: A cross-sectional study was conducted at the Paediatric Clinic, Sarawak General Hospital. A total of 100 children, aged 6-12 years with chronic bronchial asthma, were recruited according to the study criteria. Venous blood samples were obtained to measure the intracellular (RBC) magnesium level using the GBC Avanta Flame Atomic Absorption Spectrophotometer.
    RESULTS: Mean age was 8.57 (SD 1.18) years, and 63% of the participants were male. Mean duration of asthma was 62.2 (SD 32.3) months. A normal intracellular magnesium level was found in 95% of the participants, with a mean of 2.27 (SD 0.33) mmol/L. Two-thirds of the participants had a normal peak flow expiratory rate (> 80% of predicted value). About 85% were using both reliever and controller. Almost half of the participants (49%) had chronic asthma that was well-controlled. No significant relationship was found between magnesium level and age (r = -0.089, P = 0.379), gender (t = 0.64, P = 0.52), duration of asthma (r = -0.03, P = 0.74), PEFR (t = 0.41, P = 0.68), current level of asthma control (t = 0.02, P = 0.97), and current treatment (t = 0.414, P = 0.680).
    CONCLUSION: There was no significant intracellular magnesium deficiency in children with chronic bronchial asthma. There was no significant relationship between therapeutic medications used for treatment of children with chronic asthma and intracellular magnesium levels.
    KEYWORDS: asthma; intracellular; magnesium
    Study site: Paediatric Clinic, Sarawak General Hospital, Sarawak, Malaysia
    Matched MeSH terms: Spectrophotometry, Atomic
  18. Sarkar SM, Rashid SS, Karim KMR, Mustapha SNH, Lian YM, Zamri N, et al.
    J Nanosci Nanotechnol, 2019 05 01;19(5):2856-2861.
    PMID: 30501791 DOI: 10.1166/jnn.2019.16289
    Corn-cobs are an agro-industrial waste and composed of cellulose mostly. In this study cellulose was isolated from the waste corn-cobs and modified to polymeric hydroxamic acid palladium complex 1 and characterized by using a variety of spectroscopic methods such as field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The complex 1 exhibited high catalytic activity towards Suzuki and Heck coupling reactions of activated and deactivated aryl halides to give the respective coupling products with high yield. Moreover, the complex 1 was recovered and recycled five times with no considerable loss of catalytic overall performance.
    Matched MeSH terms: Spectrophotometry, Atomic
  19. Sahibin Abd. Rahim, Wan Mohd. Razi Idris, Zulfahmi Ali Rahman, Kadderi Md. Desa, Tukimat Lihan, Azman Hashim, et al.
    This study was carried out at an ultrabasic area, Selaru (S1 & S2) dan Felda Rokan Barat (S3), Kuala Pilah, Negeri Sembilan. Eighteen samples of plant and their substrates were collected from study area. The purpose of this study was to determine heavy metal such as Ni, Cr, Mn, Co, Fe and Zn contents in soils and different parts of the plant, such as leaf, stem, root and fruit. Biologal Absorption Coefficient (BAC) of the plant was obtained by calculation. Heavy metals content in the plant were extracted by digestion method whereas in soil the heavy metals were extracted by sequential extraction. Heavy metals content in soil and plant extract was determined using Flame Atomic Absorption Spectrophotometer. It was found that heavy metal concentrations in soil substrate for mengkudu (Morinda citrifolia) were high for Fe followed by Cr, Ni, Mn, Zn and Co with average concentration of 1208.5, 583.4, 352.4, 352.4, 70.7 and 53.6 mg.kg-1, respectively. Available Mn and Zn concentrations were higher than the other heavy metals in term of percentage. Fe and Mn were dominant in all parts of plants however in terms of BAC average, Co showed the highest enrichment value in all parts of the plants.
    Matched MeSH terms: Spectrophotometry, Atomic
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links