Displaying publications 1 - 20 of 144 in total

Abstract:
Sort:
  1. Afsah-Hejri L, Jinap S, Hajeb P, Radu S, Shakibazadeh S
    Compr Rev Food Sci Food Saf, 2013 Nov;12(6):629-651.
    PMID: 33412719 DOI: 10.1111/1541-4337.12029
     Fungi are distributed worldwide and can be found in various foods and feedstuffs from almost every part of the world. Mycotoxins are secondary metabolites produced by some fungal species and may impose food safety risks to human health. Among all mycotoxins, aflatoxins (AFs), ochratoxin A (OTA), trichothecenes, deoxynivalenol (DON and T-2 toxin), zearalenone (ZEN), and fumonisins (FMN) have received much attention due to high frequency and severe health effects in humans and animals. Malaysia has heavy rainfall throughout the year, high temperatures (28 to 31 °C), and high relative humidity (70% to 80% during wet seasons). Stored crops under such conditions can easily be contaminated by mycotoxin-producing fungi. The most important mycotoxins in Malaysian foods are AFs, OTA, DON, ZEN, and FMN that can be found in peanuts, cereal grains, cocoa beans, and spices. AFs have been reported to occur in several cereal grains, feeds, nuts, and nut products consumed in Malaysia. Spices, oilseeds, milk, eggs, and herbal medicines have been reported to be contaminated with AFs (lower than the Malaysian acceptable level of 35 ng/g for total AFs). OTA, a possible human carcinogen, was reported in cereal grains, nuts, and spices in Malaysian market. ZEN was detected in Malaysian rice, oat, barley, maize meal, and wheat at different levels. DON contamination, although at low levels, was reported in rice, maize, barley, oat, wheat, and wheat-based products in Malaysia. FMN was reported in feed and some cereal grains consumed in Malaysia. Since some food commodities are more susceptible than others to fungal growth and mycotoxin contamination, more stringent prevention and control methods are required.
    Matched MeSH terms: Zea mays
  2. Se KW, Ghoshal SK, Wahab RA, Ibrahim RKR, Lani MN
    Food Res Int, 2018 03;105:453-460.
    PMID: 29433236 DOI: 10.1016/j.foodres.2017.11.012
    In this study, we propose an easy approach by combining the Fourier transform infrared and attenuated total reflectance (FTIR-ATR) spectroscopy together with chemometrics analysis for rapid detection and accurate quantification of five adulterants such as fructose, glucose, sucrose, corn syrup and cane sugar in stingless bees (Heterotrigona itama) honey harvested in Malaysia. Adulterants were classified using principal component analysis and soft independent modeling class analogy, where the first derivative of the spectra in the wavenumber range of 1180-750cm-1 was utilized. The protocol could satisfactorily discriminate the stingless bees honey samples that were adulterated with the concentrations of corn syrup above 8% (w/w) and cane sugar over 2% (w/w). Feasibility of integrating FTIR-ATR with chemometrics for precise quantification of the five adulterants was affirmed using partial least square regression (PLSR) analysis. The study found that optimal PLSR analysis achieved standard error of calibrations and standard error of predictions within an acceptable range of 0.686-1.087% and 0.581-1.489%, respectively, indicating good predictive capability. Hence, the method developed here for detecting and quantifying adulteration in H. itama honey samples is accurate and rapid, requiring only 7-8min to complete as compared to 3h for the standard method, AOAC method 998.12.
    Matched MeSH terms: Zea mays
  3. Yarima MH, Khandaker MU, Nadhiya A, Olatunji MA
    Radiat Prot Dosimetry, 2019 Oct 01;184(3-4):359-362.
    PMID: 31089715 DOI: 10.1093/rpd/ncz115
    Uranium, thorium and potassium are the most abundant naturally occurring radioactive materials (NORMs) found in soils and other environmental media including foodstuffs. Since the human exposures to NORMs is an unavoidable phenomenon, in such a way that they can easily find their way to human being via food chain, detailed knowledge on their presence in foodstuffs is necessary to assess the radiation dose to the population. Thus, the present study concerns the assessment of natural radioactivity in maize, a staple foodstuff for Nigerian, via HPGe gamma-ray spectrometry. Activity concentrations (Bq/kg) in the maize samples were found to be in the range of 6.1 ± 0.6-8.2 ± 1.3, 2.2 ± 0.4-5.1 ± 0.7 and 288 ± 16-401 ± 24 for 226Ra, 232Th and 40K, respectively. Measured data for 226Ra and 232Th show below the world average values of 67 Bq/kg and 82 Bq/kg, respectively, while the activity of 40K exceeds the global average of 310 Bq/kg. The annual effective dose via the maize consumption was found to be far below the UNSCEAR recommended ingestion dose limit of 290 μSv/y, and the estimated lifetime cancer risk show lower than the ICRP (1991) cancer risk factor of 2.5 × 10-3 based on the additional annual dose limit of 1 mSv for general public, thus pose no adverse health risk to the Nigerian populace.
    Matched MeSH terms: Zea mays/metabolism*; Zea mays/radiation effects
  4. Salihu A, Abbas O, Sallau AB, Alam MZ
    3 Biotech, 2015 Dec;5(6):1101-1106.
    PMID: 28324400 DOI: 10.1007/s13205-015-0294-5
    Different agricultural residues were considered in this study for their ability to support cellulolytic enzyme production by Aspergillus niger. A total of eleven agricultural residues including finger millet hulls, sorghum hulls, soybean hulls, groundnut husk, banana peels, corn stalk, cassava peels, sugarcane bagasse, saw dust, rice straw and sheanut cake were subjected to three pretreatment (acid, alkali and oxidative) methods. All the residues supported the growth and production of cellulases by A. niger after 96 h of incubation. Maximum cellulase production was found in alkali-treated soybean hulls with CMCase, FPase and β-glucosidase yields of 9.91 ± 0.04, 6.20 ± 0.13 and 5.69 ± 0.29 U/g, respectively. Further studies in assessing the potential of soybean hulls are being considered to optimize the medium composition and process parameters for enhanced cellulase production.
    Matched MeSH terms: Zea mays
  5. Huang P, Huang S, Ma Y, Danish S, Hareem M, Syed A, et al.
    BMC Plant Biol, 2024 Jan 23;24(1):63.
    PMID: 38262953 DOI: 10.1186/s12870-024-04753-x
    Salinity stress adversely affects agricultural productivity by disrupting water uptake, causing nutrient imbalances, and leading to ion toxicity. Excessive salts in the soil hinder crops root growth and damage cellular functions, reducing photosynthetic capacity and inducing oxidative stress. Stomatal closure further limits carbon dioxide uptake that negatively impact plant growth. To ensure sustainable agriculture in salt-affected regions, it is essential to implement strategies like using biofertilizers (e.g. arbuscular mycorrhizae fungi = AMF) and activated carbon biochar. Both amendments can potentially mitigate the salinity stress by regulating antioxidants, gas exchange attributes and chlorophyll contents. The current study aims to explore the effect of EDTA-chelated biochar (ECB) with and without AMF on maize growth under salinity stress. Five levels of ECB (0, 0.2, 0.4, 0.6 and 0.8%) were applied, with and without AMF. Results showed that 0.8ECB + AMF caused significant enhancement in shoot length (~ 22%), shoot fresh weight (~ 15%), shoot dry weight (~ 51%), root length (~ 46%), root fresh weight (~ 26%), root dry weight (~ 27%) over the control (NoAMF + 0ECB). A significant enhancement in chlorophyll a, chlorophyll b and total chlorophyll content, photosynthetic rate, transpiration rate and stomatal conductance was also observed in the condition 0.8ECB + AMF relative to control (NoAMF + 0ECB), further supporting the efficacy of such a combined treatment. Our results suggest that adding 0.8% ECB in soil with AMF inoculation on maize seeds can enhance maize production in saline soils, possibly via improvement in antioxidant activity, chlorophyll contents, gas exchange and morphological attributes.
    Matched MeSH terms: Zea mays
  6. Khadijah, O., Lee, K.K., Abdullah, M.F.F.
    ASM Science Journal, 2010;4(2):103-112.
    MyJurnal
    Two sequential statistical experimental designs were used to screen and investigate the dependence of the amount of biodegradation of Procion Red MX-8B (PR-MX8B) on the fermentation variables. Fourteen factors were screened using the Plackett-Burman design. Among these factors, the most significant variables which included yeast extract, corn steep solids and starch influencing PR-MX8B decolourisation were statistically elucidated for optimization. The optimum concentrations of 5.00 g/l yeast extract, 2.99 g/l starch and 1.89 g/l corn steep solids were predicted by applying the Box-Behnken design to the second order polynomial model fitted to the results obtained. The best predicted optimal conditions verified experimentally yielded 72.11% while the predicted value from the polynomial model was 79.17%. The experimental values were in good agreement with the predicted values with a 90.81% degree of accuracy.
    Matched MeSH terms: Zea mays
  7. Elsedig, E.A.A., Mohd, M.I., Fatimah, M.A
    MyJurnal
    Malaysian poultry policy aims to provide remunerative prices for producers and to guarantee a steady supply of poultry products at stable and affordable prices to consumers. Broiler meat is the most important and the cheapest protein source in Malaysia and trade protection could stimulate the local industry and enhance food security. The study attempts to evaluate the competitiveness and comparative advantage of three different scales of broiler production in Johor using policy analysis matrix (PAM). The existing protection and the level of comparative advantage are ascertained through PAM indicators. The results show that Malaysia has strong competitiveness position in every scale of broiler production especially the largest scale. But, the protection through import curtailment resulted in higher domestic prices than the world price. To increase competitiveness, the broiler industry should reduce the dependence on expensive and unstable cost of corn based feed.
    Matched MeSH terms: Zea mays
  8. Mandal BH, Rahman ML, Yusoff MM, Chong KF, Sarkar SM
    Carbohydr Polym, 2017 Jan 20;156:175-181.
    PMID: 27842811 DOI: 10.1016/j.carbpol.2016.09.021
    Corn-cob cellulose supported poly(hydroxamic acid) Cu(II) complex was prepared by the surface modification of waste corn-cob cellulose through graft copolymerization and subsequent hydroximation. The complex was characterized by IR, UV, FESEM, TEM, XPS, EDX and ICP-AES analyses. The complex has been found to be an efficient catalyst for 1,3-dipolar Huisgen cycloaddition (CuAAC) of aryl/alkyl azides with a variety of alkynes as well as one-pot three-components reaction in the presence of sodium ascorbate to give the corresponding cycloaddition products in up to 96% yield and high turn over number (TON 18,600) and turn over frequency (TOF 930h-1) were achieved. The complex was easy to recover from the reaction mixture and reused six times without significant loss of its catalytic activity.
    Matched MeSH terms: Zea mays/chemistry*
  9. Bai Y, Rafiq MK, Li S, Degen AA, Mašek O, Sun H, et al.
    J Hazard Mater, 2021 02 05;403:123647.
    PMID: 33264862 DOI: 10.1016/j.jhazmat.2020.123647
    Yak dung is used as fuel in Tibetan homes; however, this use is hazardous to health. An alternative use of the dung that would be profitable and offset the loss as a fuel would be very beneficial. Sweet sorghum silage with yak dung biochar as an additive was compared with a control silage with no additives and three silages with different commercial additives, namely Lactobacillus buchneri, Lactobacillus plantarum and Acremonium cellulase. Biochar-treated silage had a significantly greater concentration of water-soluble carbohydrates than the other silages (76 vs 12.4-45.8 g/kg DM) and a greater crude protein content (75.5 vs 61.4 g/kg DM), lactic acid concentration (40.7 vs 27.7 g/kg DM) and gross energy yield (17.8 vs 17.4 MJ/kg) than the control silage. Biochar-treated and control silages did not differ in in vitro digestibility and in total gas (507 vs 511 L/kg DM) and methane production (57.9 vs 57.1 L/kg DM). Biochar inhibited degradation of protein and water-soluble carbohydrates and enhanced lactic acid production, which improved storability of feed. It was concluded that yak dung biochar is an efficient, cost-effective ensiling additive. The profit could offset the loss of dung as fuel and improve the health of Tibetan people.
    Matched MeSH terms: Zea mays
  10. Syed MA, Arshad JH, Mat S
    J Environ Sci Health B, 1992 Aug;27(4):347-54.
    PMID: 1527358
    Paddy (unmilled rice), milled rice and maize-bound 14C residues were prepared using 14C-succinate-labelled malathion at 10 and 152 ppm. After 3 months, the bound residues accounted for 12%, 6.5% and 17.7% of the applied dose in paddy, milled rice and maize respectively in the grains treated at 10 ppm. The corresponding values for the 152 ppm were 16.6%, 8.5% and 18.8%. Rats fed milled rice - bound 14C-residues eliminated 61% of the 14C in the faeces and 28% in the urine. The corresponding percentages for paddy and maize were 72%, 9% and 53%, 41% respectively; indicating that bound residues from milled rice and maize were moderately bioavailable. When rice-bound malathion residues (0.65 ppm in feed) were administered to rats in a 5 week feeding study, no signs of toxicity were observed. Plasma and RBC cholinesterase activities were slightly inhibited: blood urea nitrogen was significantly elevated in the test animals. Other parameters examined showed no or marginal changes.
    Matched MeSH terms: Zea mays*
  11. Koo HC, Abdul Jalil SN, Ruzita AT
    Malays J Med Sci, 2015;22(1):32-9.
    PMID: 25892948
    BACKGROUND: Studies from the West have demonstrated that ready-to-eat cereals (RTECs) are a common form of breakfast and more likely to be consumed by children. This study aimed to investigate the breakfast eating pattern and RTECs consumption among schoolchildren in Kuala Lumpur.
    METHODS: In this cross-sectional study, a total of 382 schoolchildren, aged 10 and 11 years old, were recruited from seven randomly selected primary schools in Kuala Lumpur. Information on socio-demographics, breakfast eating patterns, and perceptions of RTECs and dietary intake (24-hour dietary recalls) were obtained.
    RESULTS: Among the respondents, only 22% of them consumed breakfast on a regular basis. The most commonly eaten food by children at breakfast was bread (27.2%), followed by biscuits (22.2%) and RTECs (20.5%). The majority of them (93%) reported that they consumed RTECs sometimes during the week. Chocolate RTECs (34.1%), corn flake RTECs (30.3%), and RTECs coated with honey (25.1%) were the most popular RTECs chosen by children. Respondents who consumed RTECs showed a significantly higher intake in calories, carbohydrate, vitamin A, vitamin B1, vitamin B2, vitamin B3, folate, vitamin C, calcium, iron, and fibre (P < 0.05), compared to those who skipped breakfast and those who had breakfast foods other than RTECs.
    CONCLUSION: The lower levels of breakfast consumption among schoolchildren in Kuala Lumpur need serious attention. RTEC is a nutritious food which is well accepted by a majority of the schoolchildren in Kuala Lumpur. Nutrition intervention should be conducted in the future to include a well-balanced breakfast with the utilisation of RTECs for schoolchildren.
    KEYWORDS: Malaysia; breakfast; calorie; cereals; children
    Matched MeSH terms: Zea mays
  12. Sarkar SM, Rashid SS, Karim KMR, Mustapha SNH, Lian YM, Zamri N, et al.
    J Nanosci Nanotechnol, 2019 05 01;19(5):2856-2861.
    PMID: 30501791 DOI: 10.1166/jnn.2019.16289
    Corn-cobs are an agro-industrial waste and composed of cellulose mostly. In this study cellulose was isolated from the waste corn-cobs and modified to polymeric hydroxamic acid palladium complex 1 and characterized by using a variety of spectroscopic methods such as field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The complex 1 exhibited high catalytic activity towards Suzuki and Heck coupling reactions of activated and deactivated aryl halides to give the respective coupling products with high yield. Moreover, the complex 1 was recovered and recycled five times with no considerable loss of catalytic overall performance.
    Matched MeSH terms: Zea mays
  13. Takahiro Ishii, Takashi Kamada, Chin-soon Phan, Charles S. Vairappan
    Sains Malaysiana, 2018;47:319-322.
    Soft corals are often the research interest organism due to their structural diverse secondary metabolites with wide
    spectrum of biological activities range from antibacterial to anticancer potentials. The Borneo Island is rich in diversity
    of marine organisms including soft coral. Therefore, a population of Bornean soft coral belongs to genus Nephthea
    was collected from Mantanani Island (Sabah, Malaysia) which led to the isolation of a novel norditerpene, chabrolene
    (1) together with three known compounds (2-4). The chemical structure of 1 was determined by NMR and HREIMS data.
    Compound 1 exhibited repellent activity against the maize weevil Sitophilus zeamais.
    Matched MeSH terms: Zea mays
  14. Heng MH, Baharuddin S, Latiffah Z
    Genet. Mol. Res., 2012;11(1):383-92.
    PMID: 22370941 DOI: 10.4238/2012.February.16.4
    Fusarium species section Liseola namely F. fujikuroi, F. proliferatum, F. andiyazi, F. verticillioides, and F. sacchari are well-known plant pathogens on rice, sugarcane and maize. In the present study, restriction analysis of the intergenic spacer regions (IGS) was used to characterize the five Fusarium species isolated from rice, sugarcane and maize collected from various locations in Peninsular Malaysia. From the analysis, and based on restriction patterns generated by the six restriction enzymes, Bsu151, BsuRI, EcoRI, Hin6I, HinfI, and MspI, 53 haplotypes were recorded among 74 isolates. HinfI showed the most variable restriction patterns (with 11 patterns), while EcoRI showed only three patterns. Although a high level of variation was observed, it was possible to characterize closely related species and isolates from different species. UPGMA cluster analysis showed that the isolates of Fusarium from the same species were grouped together regardless of the hosts. We conclude that restriction analysis of the IGS regions can be used to characterize Fusarium species section Liseola and to discriminate closely related species as well as to clarify their taxonomic position.
    Matched MeSH terms: Zea mays/microbiology
  15. Najihah A, Nur Ain Izzati M, Yong S, Nik Mohd Izham M
    Sains Malaysiana, 2017;46:2425-2432.
    Fusarium species are known to cause various diseases on plantations including fruits and vegetables. The most common Fusarium that can cause plant diseases are Fusarium proliferatum and Fusarium verticillioides. Ear rot disease on maize, wilt disease on cucurbits and fruit rot disease on tomato as well as banana are example of diseases caused by these two species. The objectives of this study were to identify F. proliferatum and F. verticillioides based on species-specific primers and polymerase chain reaction (PCR) amplification and to evaluate the genetic diversity of both species based on microsatellite markers. Fifty isolates of Fusarium species that were previously collected throughout Malaysia from different hosts were identified by using species-specific PCR amplification. Twenty-nine isolates were identified as F. proliferatum and 21 isolates were identified as F. verticillioides based on species-specific primer. The genetic diversity of all the fungal isolates was evaluated by using microsatellite analysis with six established primers. Five out of six primers amplified polymorphic bands with the most effective primer showing high polymorphism were (AG)7C and (TCC)5 meanwhile one primer (TTTC)4 gave negative result with no band amplified. The phylogenetic tree that was constructed showing two different clades distinguished between F. proliferatum and F. verticillioides.
    Matched MeSH terms: Zea mays
  16. Kuan YH, Liong MT
    J Agric Food Chem, 2008 Oct 8;56(19):9252-7.
    PMID: 18788708 DOI: 10.1021/jf802011j
    The objective of this study was to evaluate the chemical, physicochemical, and functional properties of agrowastes derived from okara ( Glycine max), corn cob ( Zea mays sp.), wheat straw ( Triticum sp.), and rice husk ( Oryza sativa) for potential applications in foods. The fibrous materials (FM) were treated with alkali to yield fibrous residues (FR). Rice husk contained the highest ash content (FM, 8.56%; FR, 9.04%) and lowest lightness in color (FM, 67.63; FR, 63.46), possibly due to the abundance of mineral constituents. Corn cob contained the highest amount of soluble dietary fiber (SDF), whereas okara had the highest total dietary fiber (TDF). The high dietary fiber fractions of corn cob and okara also contributed to the highest water- and oil-holding capacities, emulsifying activities, and emulsion stabilities for both FM and FR samples. These results indicate that these agrowastes could be utilized as functional ingredients in foods.
    Matched MeSH terms: Zea mays/chemistry
  17. Bujang JS, Zakaria MH, Ramaiya SD
    PLoS One, 2021;16(2):e0247327.
    PMID: 33626109 DOI: 10.1371/journal.pone.0247327
    Currently, bee-gathered pollen (bee pollen) is commonly used worldwide as a dietary supplement and is recognized for its curative properties. Floral pollen is also important but is less recognized due to a lack of investigation. This study aims to determine the morphological characteristics and nutritional and phytochemical properties of floral maize pollen. Fresh pollen grains harvested from a farm of maize plants are yellow in colour and spheroid in shape. They change to amber and indented prismatic solid shapes when dehydrated. The main composition of floral maize pollen is carbohydrates (44.30±3.73%), followed by moisture (23.38±5.73%), crude proteins (17.16±3.13%), crude fibres (9.56±0.92%), and ash (4.98±0.11%), while the lowest content is observed for crude fats (0.62±0.06%). The predominant mineral is potassium (768.50±11.40 mg 100 g-1), followed by sodium (695.10±9.70 mg 100 g-1), calcium (147.20±12.60 mg 100 g-1), and magnesium (97.30±2.9 mg 100 g-1). The microelements (with average values) consist of iron (49.50±3.30 mg 100 g-1) and zinc (30.00±3.70 mg 100 g-1). Excellent phytochemical properties add value to floral maize pollen. Maize pollen contains a high total phenolic content (TPC) and total flavonoid content (TFC) of 783.02 mg GAE 100 g-1 and 1706.83 mg QE 100 g-1, respectively, and possesses strong antioxidant activity of 10.54 mg mL-1. Maize floral pollen and derived products can serve as future food resources for human consumption and as a source of functional and bioactive compounds in nutraceutical and pharmaceutical industries.
    Matched MeSH terms: Zea mays/chemistry*
  18. Liew CW, Ramesh S
    Materials (Basel), 2014 May 21;7(5):4019-4033.
    PMID: 28788662 DOI: 10.3390/ma7054019
    Two different ionic liquid-based biopolymer electrolyte systems were prepared using a solution casting technique. Corn starch and lithium hexafluorophosphate (LiPF₆) were employed as polymer and salt, respectively. Additionally, two different counteranions of ionic liquids, viz. 1-butyl-3-methylimidazolium hexafluorophosphate (BmImPF₆) and 1-butyl-3-methylimidazolium trifluoromethanesulfonate (also known as 1-butyl-3-methylimidazolium triflate) (BmImTf) were used and studied in this present work. The maximum ionic conductivities of (1.47 ± 0.02) × 10(-4) and (3.21 ± 0.01) × 10(-4) S∙cm(-1) were achieved with adulteration of 50 wt% of BmImPF₆ and 80 wt% of BmImTf, respectively at ambient temperature. Activated carbon-based electrodes were prepared and used in supercapacitor fabrication. Supercapacitors were then assembled using the most conducting polymer electrolyte from each system. The electrochemical properties of the supercapacitors were then analyzed. The supercapacitor containing the triflate-based biopolymer electrolyte depicted a higher specific capacitance with a wider electrochemical stability window compared to that of the hexafluorophosphate system.
    Matched MeSH terms: Zea mays
  19. Tung Nguyen, C.T., Son, R., Raha, A.R., Lai, O.M., Clemente Michael, W.V.L.
    MyJurnal
    The ability to detect the presence of transgenes in crop-derived foods depends on the quantity and quality of DNA obtained from a product to be analyzed. The efficiency of DNA extraction protocols differs due to the nature of each food product. In this paper, we described two main DNA extraction protocols and their modifications that have been applied and evaluated for DNA extraction from raw and processed food as well as animal feed. The yield and quality for five categories of food and feed samples namely, raw soybean, raw maize, animal feed, smooth tofu and soymilk are discussed. The statistical interaction analyses showed that the cetyltrimethyl ammonium bromide (CTAB) method was proven to be the best method to extract DNA from raw soybean, maize and animal feed samples which not only obtained high DNA yield of 32.7, 28.4 and 33.4 ng DNA/mg sample respectively, but also produced high quality DNA with the absorbance A260/A280 ratio of 1.9, 1.9 and 2.0, respectively. These DNA were suitable for PCR amplification which produced a 164 bp DNA fragment of the lectin gene from soybean, and a 277 bp DNA fragment of the zein gene from maize. In the processed food category, the Wizard isolation method was found to be the best for the extraction of DNA from smooth tofu and soymilk with the yield of 13.2 and 3.4 ng DNA/mg sample, and the quality of the DNA at the absorbance A260/A280 ratio ranged from 1.9 to 1.7. These DNA were successfully amplified using primers specific to the lectin gene of soybean.
    Matched MeSH terms: Zea mays
  20. Hasan M, Hanafiah MM, Alhilfy IHH, Aeyad Taha Z
    PeerJ, 2021;9:e10614.
    PMID: 33520446 DOI: 10.7717/peerj.10614
    Background: Laser applications in agriculture have recently gained much interest due to improved plant characteristics following laser treatment before the sowing of seeds. In this study, maize seeds were exposed to different levels of laser treatment prior to sowing to improve their field performance. The aim of this study is to evaluate the impact of pre-sowing laser photobiomodulation on the field emergence and growth of treated maize seeds.

    Methods: The maize seeds were first photobiomodulated with two lasers: 1) a helium-neon (He-Ne) red laser (632.8 nm), and 2) a neodymium-doped yttrium aluminum garnet (Nd:YAG) green laser (532 nm). Following three replications of randomized complete block design (RCBD), four irradiation treatments were applied (45 s, 65 s, 85 s, and 105 s) at two power intensities (2 mW/cm2 and 4 mW/cm2).

    Results: Based on the results, maize seeds pretreated with a green laser and 2 mW/cm2 power intensity for 105 s exhibited the highest rate of seed emergence (96%) compared to the untreated control seeds with a lower seed emergence rate (62.5%). Furthermore, maize seeds treated with a red laser for 45 s showed an increased vigor index compared to the other treatment options and the control (P 

    Matched MeSH terms: Zea mays
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links