Current ethanol production processes utilizing crops such as sugar cane and corn starch have been well established over the decade. Other crop such as cassava is a potential candidate in producing ethanol. However, thermal processes are required to hydrolyze starch for the production of fermentable sugars. The processes are energy intensive and could lead to undesirable by-products generation. In this work, the hydrolysis of cassava starch is studied following an experimental design as a statistical problem solving approach. Central composite design (CCD) is used in order to select the most important variables from the simultaneous study on the effect and influence of operating conditions of bioreactor utilized, namely, pH, temperature and substrate concentration, as well as to optimize the process of cassava starch hydrolysis. From the results obtained, it can be concluded that the cassava starch hydrolysis is enhanced by pH and temperature. Model validations show good agreement between experimental results and the predicted responses.
The enzymatic hydrolysis of lead tree seed protein with alcalase to obtain Lead Tree Seed Hydrosylate (LTSH) was optimized using response surface methodology (RSM). A three- tiered, factor face centered, central composite design (CCD) was used to study the influence of four independent variables namely: pH (7–9); hydrolysis temperature (50oC, 55oC, 60oC); hydrolysis time (30 min, 60 min, 90 min); and enzyme/substrate (1%, 2%, 3%) ratio on both yield and antioxidant activity. The CCD consisted of twenty-four experimental points and six replicates of central points. All data were analyzed using Design-Expert Software. The optimum conditions obtained from experiments were a pH of 9; an enzyme to substrate ratio of 2%; a hydrolysis time of 90 min; and a temperature of 55°C. Results showed that LTSH derived from optimized hydrolysis exhibited effective ferrous ion chelating activity (92.79%) and strong reducing power (A700 = 3.82) at a concentration of 20 mg/ml. LTSH also demonstrated high DPPH radical scavenging activity (76.21%; IC50 1.99 mg/ml), as well as hydroxyl radical scavenging activity (66.72%; IC50 2.45 mg/ml). Superoxide anion scavenging activity was 55.71% (IC50 3.89 mg/ml) at 20 mg/ml. These results suggest that LTSH has potential as a natural antioxidant of functional food and for use in food processing.
The sea cucumber (Stichopus vastus) is an underutilized species, as most of its parts, including the integument (high collagen content) are thrown away during processing. The aim of this study was to investigate the effects of different hydrolysis conditions (substrate to enzyme ratio (S/E), reaction temperature, and hydrolysis time) on the angiotensin I converting enzyme (ACE) inhibitory and radical scavenging (RSc) activities of the hydrolysates produced from trypsin hydrolysis of S. vastus collagen. Optimal conditions predicted by Box-Behnken Design modelling for producing ACE inhibitory and RSc hydrolysates were found to be S/E ratio (15), reaction temperature (55°C), and hydrolysis time (1 h). Under optimal conditions, ACE inhibitory and RSc activities were estimated to be as high as 67.8% and 77.9%, respectively. Besides, some novel bioactive peptides were identified through mass spectrometry analysis. These results indicate that S. vastus hydrolysates might be used as a functional ingredient in food and nutraceutical products.
This study was conducted to ascertain the cytotoxicity effect of oil palm (Elaeis guineensis) kernel protein hydrolysates (OPKHs) produced from its protein isolate. A modified microplate titer WST-1 [2-(4-iodophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium] assay was used to investigate the cytotoxicity of hydrolysates produced from protease and pepsin-pancreatin hydrolysis at various concentrations (0.1, 1, 10, 100 μg/ml and 1 mg/ml) using HepG2 cell model. Additionally, peptide stimulation test using OPKHs at 1 mg/ml was carried out to investigate whether OPKHs could serve as growth factor for HepG2 cells other than affecting its viability. As a result, oleic acid appeared to normalize the WST-1 readings of HepG2 cells treated with both hydrolysates at 1 mg/ml. The presence of amino acids in OPKHs could stimulate the growth and prolongs the viability of HepG2 cells. Both OPKHs were non-cytotoxic to HepG2 cells at all tested concentrations even at high concentrations. This study indicated that pepsin-pancreatin and protease hydrolysates produced from oil palm kernel protein were non-cytotoxic on HepG2 cells.
Acacia mangium, a fast growing tree is widely planted in Malaysia. Converting Acacia wood into nanocellulose could create new value added products for forest-based industry. Nanocrystalline cellulose (NCC) was prepared from Acacia mangium wood pulp via 64wt% sulfuric acid hydrolysis. Prior to acid hydrolysis, Acacia mangium was subjected to pulping followed by bleaching in order to remove non-cellulosic fragments. Acid hydrolysis was carried out on bleached pulp to produce the needle-like NCC with 79% crystallinity and aspect ratio of 26. The resulting NCC was mixed with PVA as a reinforcement material. Incorporation of 2% NCC improved the tensile of the NCC-PVA film by 30%.
Introduction: This study aims to build a standardization method for preparation of effective powder from
FSA and to quantify diosgenin in FSA. Methodology: One kg of FS were used in this study. Setting: BMS, KOM
and KOP, IIUM Kuantan campus. FS were washed with distilled water to exclude any foreign matter, and
were then air dried. FS-powder were put in distilled water in a ratio of 1 g of powder in 20 ml of distilled
water and were shaken at room temperature for 24 hours. Ten mg of hydrolyzed extract sample was diluted
in 10 ml volumetric flask with methanol for 15 minutes. Chromatographic estimation was performed using
an equilibrated reverse phase Eclipse XDB-C18 column (particle size 5 µg, 4.6 mm x 150 mm). Results: One
gram of FSA extract was hydrolyzed to produce sapogenins and 46.6% was recovered. A calibration curve
that was constructed based on five dilutions of diosgenin standard at concentrations of 2, 5, 10, 20, 30 and
50 ppm produced a linear graft (r = 0.999). The concentration of diosgenin in FSA extract as calculated using
the regression analysis was found to be 29.66 µg/ml, 13.81 % w/w on dried weight basis. Conclusion:
Preparation and standardization of effective powder from FSA are the corner stone of many scientific
researches in IIUM and Malaysia. Diosgenin is available in the FSA in adequate concentration. The adequate
amount of diosgenin in the FSA will guide us to do further study in the way of preparation of a natural
product that can be used in the field of reversible anti-fertility therapy.
Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is one of the polyhydroxyalkanoate (PHA) copolymers which can be degraded by lipases. In this study, the depolymerizing activity of different known commercial lipases was investigated via microassay using P(3HB-co-92 mol % 4HB) thin film as substrate. Non-enzymatic hydrolysis occurred under conditions in which buffers with pH 12 and 13 were added or temperature of 50 °C and above. Different concentrations of metal ions or detergents alone did not cause the film hydrolysis. The depolymerizing activity of lipases on P(3HB-co-4HB) was optimum in the pH range of 6-8 and at temperatures between 30 and 50 °C. Addition of metal ions and detergents in different concentrations was also shown to cause variable effects on the depolymerizing activity of commercial lipases. Pancreatic extracts from both mouse and chicken showed similar depolymerizing activity as the commercial lipases on the P(3HB-co-4HB) film. The presence of lipolytic enzymes in the organ extracts was confirmed with another lipase activity assay, p-nitrophenyl laurate assay. For the first time this has produced a direct evidence for the involvement of lipase-like enzymes from animal in the degradation of this PHA. Lipase is most likely the enzyme from pancreas that was involved in the degradation.
This paper reports on the extraction, partial characterization and the potential application of crude polysaccharides from defatted coconut residue as a prebiotic. The coconut residue was defatted and extracted to obtain the crude polysaccharides and its physicochemical properties were determined. The crude polysaccharides were assessed for monosaccharide composition, total carbohydrate content, reducing sugar concentration and protein content determination. The functional group and structural elucidation of crude polysaccharides was also done using Fourier transform infrared spectra analysis. The product was then subjected to artificial human gastric juice treatment to determine digestibility. Finally, an in vitro proliferation and acid production by two probiotic bacteria namely Lactobacillus casei Shirota and Lactobacillus bulgaricus were included in this study. It was found that the defatted coconut residue contained ash (0.54%), moisture (55.42%), protein (1.69%), crude fat (17.26%) and carbohydrate (25.73%). The percentage of crude polysaccharides extracted was 0.73 ± 0.04. The two fractions of monosaccharides obtained were glucose and fructose. Total carbohydrate content of DCR was 13.35% (w/v). The quantitative value of the reducing sugars obtained was 20.71%. Protein content in the crude polysaccharides was 0.009% and the peaks which indicated the presence of protein were observed at around 1640 cm(-1) (amide I) and 1530 cm(-1) (amide II). DCR crude polysaccharides were highly resistant (88%) to hydrolysis when subjected to artificial human gastric juice. The product was found to markedly stimulate two tested probiotics to proliferate and produce organic acids. All the above findings are supportive of the fact that polysaccharides extracted from DCR, an industrial waste, have a vast potential to be exploited as novel prebiotics.
Cellulose was extracted from rice husk (RH) using an integrated delignification process using alkaline treatment and acid hydrolysis (concentrated HNO3) for lignocellulosic biomass dissolution. Cellulose yield and quality were assessed through analysis of lignocellulosic content, thermogravimetric, functional group, X-ray diffraction, and surface morphology. HNO3 treatment showed an increment (2.01-fold) in the cellulose content and some enhancement in the crystallinity of cellulose (up to 40.8%). A slight increase was observed in thermal properties from 334.6 °C to 339.3 °C. Economic analysis showed chlorine extraction produce higher cellulose recovery (58%) as compared to HNO3 (26.7%) with the total cost of operation using HNO3 was double compared to chlorine extraction. The economic feasibility of HNO3 can be improved using various progress in the pre-treatment process, chemical recycling and cellulose recovery process since adopting it is crucial for environmental sustainability.
Thermoplastic starch (TPS) hybrid bio-composite films containing microcrystalline cellulose (C) and nano-bentonite (B) as hybrid fillers were studied to replace the conventional non-degradable plastic in packaging applications. Raw oil palm empty fruit bunch (OPEFB) was subjected to chemical treatment and acid hydrolysis to obtain C filler. B filler was ultra-sonicated for better dispersion in the TPS films to improve the filler-matrix interactions. The morphology and structure of fillers were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). TPS hybrid bio-composite films were produced by the casting method with different ratios of B and C fillers. The best ratio of B/C was determined through the data of the tensile test. FTIR analysis proved the molecular interactions between the TPS and the hybrid fillers due to the presence of polar groups in their structure. XRD analysis confirmed the intercalation of the TPS chains between the B inter-platelets as a result of well-developed interactions between the TPS and hybrid fillers. SEM images suggested that more plastic deformation occurred in the fractured surface of the TPS hybrid bio-composite film due to the higher degree of stretching after being subjected to tensile loading. Overall, the results indicate that incorporating the hybrid B/C fillers could tremendously improve the mechanical properties of the films. The best ratio of B/C in the TPS was found to be 4:1, in which the tensile strength (8.52MPa), Young's modulus (42.0 MPa), elongation at break (116.4%) and tensile toughness of the film were increased by 92%, 146%, 156% and 338%, respectively. The significantly improved strength, modulus, flexibility and toughness of the film indicate the benefits of using the hybrid fillers, since these features are useful for the development of sustainable flexible packaging film.
The rapid development of the construction sector has led to massive use of raw construction materials, which are at risk of exhaustion. The problem is aggravated by the high demand for cement as binding powder and the mass production of clay bricks for construction purposes. This scenario has led to high energy consumption and carbon emissions in their production. In this regard, bio-cementation is considered a green solution to building construction, because this technology is environmentally friendly and capable of reducing carbon emissions, thus slowing the global warming rate. Most of the previously published articles have focused on microbiologically induced calcium carbonate precipitation (MICP), with the mechanism of bio-cementation related to the occurrence of urea hydrolysis as a result of the urease enzymatic activity by the microbes that yielded ammonium and carbonate ions. These ions would then react with calcium ions under favorable conditions to precipitate calcium carbonate. MICP was investigated for crack repair and the surface treatment of various types of construction materials. Research on MICP for the production of binders in construction materials has become a recent trend in construction engineering. With the development of cutting edge MICP research, it is beneficial for this article to review the recent trend of MICP in construction engineering, so that a comprehensive understanding on microbial utilization for bio-cementation can be achieved.
Over recent years, keratin has gained great popularity due to its exceptional biocompatible and biodegradable nature. It has shown promising results in various industries like poultry, textile, agriculture, cosmetics, and pharmaceutical. Keratin is a multipurpose biopolymer that has been used in the production of fibrous composites, and with necessary modifications, it can be developed into gels, films, nanoparticles, and microparticles. Its stability against enzymatic degradation and unique biocompatibility has found their way into biomedical applications and regenerative medicine. This review discusses the structure of keratin, its classification and its properties. It also covers various methods by which keratin is extracted like chemical hydrolysis, enzymatic and microbial treatment, dissolution in ionic liquids, microwave irradiation, steam explosion technique, and thermal hydrolysis or superheated process. Special emphasis is placed on its utilisation in the form of hydrogels, films, fibres, sponges, and scaffolds in various biotechnological and industrial sectors. The present review can be noteworthy for the researchers working on natural protein and related usage.
This study aimed to determine the physicochemical properties of undulated surf clam (Paphia undulata) hydrolysate as affected by the degree of hydrolysis (DH). Three levels of DH of undulated surf clam hydrolysate were prepared which were DH 36.57% (without any enzymatic hydrolysis), DH 58.25% (0.5% Alcalase®; 5 min; pH 7.5; 60ºC) and DH 91.26% (1% Alcalase®; 30 min; pH 7.5; 60ºC). After protein hydrolysis, the undulated surf clam hydrolysates were centrifuged, and their supernatants were freeze-dried. This study found that the protein hydrolysate with lower DH (DH 36.57%) gave lower protein content and higher ash and fat contents compared to other samples (DH 58.25% and DH 91.26%). However, the carbohydrate content is similar in all samples (16.56-20.04%). This study also found that foaming properties (29.43-67.50%), emulsifying capacity (11.94-110.52%) and peptide solubility (57.61-94.08%) were affected by the DH. As DH increased, the emulsifying capacity decreased, while peptide solubility increased. While the foaming capacity increased with increasing DH until it reached a maximum value and level off afterwards. For colour parameters, although there were differences between L*, a* and b* values for all three samples, a fluctuating pattern was noted with DH. DH also did not affect the water-holding and oil-holding capacity of undulated surf clam hydrolysate. This study shows that certain physicochemical properties of undulated surf clam hydrolysate can be tailored by adjusting the degree of hydrolysis.
The investigation of protein-nanoparticle interactions contributes to the understanding of nanoparticle bio-reactivity and creates a database of nanoparticles for use in nanomedicine, nanodiagnosis, and nanotherapy. In this study, hen's egg white was used as the protein source to study the interaction of proteins with sulphuric acid hydrolysed nanocellulose (CNC). Several techniques such as FTIR, zeta potential measurement, UV-vis spectroscopy, compressive strength, TGA, contact angle and FESEM provide valuable information in the protein-CNC interaction study. The presence of a broader peak in the 1600-1050 cm-1 range of CNC/egg white protein FTIR spectrum compared to the 1600-1050 cm-1 range of CNC sample indicated the binding of egg white protein to CNC surface. The contact angle with the glass surface decreased with the addition of CNC to egg white protein. The FESEM EDX spectra showed a higher amount of N and Na on the surface of CNC. It indicates the density of protein molecules higher around CNC. The zeta potential of CNC changed from -26.7 ± 0.46 to -21.7 ± 0.2 with the introduction of egg white protein due to the hydrogen bonding, polar bonds and electrostatic interaction between surface CNC and protein. The compressive strength of the egg white protein films increased from 0.064 ± 0.01 to 0.36 ± 0.02 MPa with increasing the CNC concentration from 0 to 4.73% (w/v). The thermal decomposition temperature of CNC/egg white protein decreased compared to egg white protein thermal decomposition temperature. According to UV-Vis spectroscopy, the far-UV light (207-222nm) absorption peak slightly changed in the CNC/egg white protein spectrum compared to the egg white protein spectrum. Based on the results, the observations of protein nanoparticle interactions provide an additional understanding, besides the theoretical simulations from previous studies. Also, the results indicate to aim CNC for the application of nanomedicine and nanotherapy. A new insight given by us in this research assumes a reasonable solution to these crucial applications.
A simple method for the synthesis of ZnO nanofilms composed of vertical array of quasi-1D ZnO nanostructures (quasi-NRs) on the surface was demonstrated via a 1D crystal growth of the attached nanoseeds under a rapid hydrolysis process of zinc salts in the presence of ammonia at room temperature. In a typical procedure, by simply controlling the concentration of zinc acetate and ammonia in the reaction, a high density of vertically oriented nanorod-like morphology could be successfully obtained in a relatively short growth period (approximately 4 to 5 min) and at a room-temperature process. The average diameter and the length of the nanostructures are approximately 30 and 110 nm, respectively. The as-prepared quasi-NRs products were pure ZnO phase in nature without the presence of any zinc complexes as confirmed by the XRD characterisation. Room-temperature optical absorption spectroscopy exhibits the presence of two separate excitonic characters inferring that the as-prepared ZnO quasi-NRs are high-crystallinity properties in nature. The mechanism of growth for the ZnO quasi-NRs will be proposed. Due to their simplicity, the method should become a potential alternative for a rapid and cost-effective preparation of high-quality ZnO quasi-NRs nanofilms for use in photovoltaic or photocatalytics applications.PACS: 81.07.Bc; 81.16.-c; 81.07.Gf.
Stichopus horrens flesh was explored as a potential source for generating peptides with angiotensin-converting enzyme (ACE) inhibitory capacity using 6 proteases, namely alcalase, flavourzyme, trypsin, papain, bromelain, and protamex. Degree of hydrolysis (DH) and peptide profiling (SDS-PAGE) of Stichopus horrens hydrolysates (SHHs) was also assessed. Alcalase hydrolysate showed the highest DH value (39.8%) followed by flavourzyme hydrolysate (32.7%). Overall, alcalase hydrolysate exhibited the highest ACE inhibitory activity (IC(50) value of 0.41 mg/mL) followed by flavourzyme hydrolysate (IC(50) value of 2.24 mg/mL), trypsin hydrolysate (IC(50) value of 2.28 mg/mL), papain hydrolysate (IC(50) value of 2.48 mg/mL), bromelain hydrolysate (IC(50) value of 4.21 mg/mL), and protamex hydrolysate (IC(50) value of 6.38 mg/mL). The SDS-PAGE results showed that alcalase hydrolysate represented a unique pattern compared to others, which yielded potent ACE inhibitory peptides with molecular weight distribution lower than 20 kDa. The evaluation of the relationship between DH and IC(50) values of alcalase and flavourzyme hydrolysates revealed that the trend between those parameters was related to the type of the protease used. We concluded that the tested SHHs would be used as a potential source of functional ACE inhibitory peptides for physiological benefits.
Oil palm fronds are the most abundant lignocellulosic biomass in Malaysia. In this study, fronds were tested as the potential renewable biomass for ethanol production. The soaking in aqueous ammonia pretreatment was applied, and the fermentability of pretreated fronds was evaluated using simultaneous saccharification and fermentation. The optimal pretreatment conditions were 7 % (w/w) ammonia, 80 °C, 20 h of pretreatment, and 1:12 S/L ratio, where the enzymatic digestibility was 41.4 % with cellulase of 60 FPU/g-glucan. When increasing the cellulase loading in the hydrolysis of pretreated fronds, the enzymatic digestibility increased until the enzyme loading reached 60 FPU/g-glucan. With 3 % glucan loading in the SSF of pretreated fronds, the ethanol concentration and yield based on the theoretical maximum after 12 and 48 h of the SSF were 7.5 and 9.7 g/L and 43.8 and 56.8 %, respectively. The ethanol productivities found at 12 and 24 h from pretreated fronds were 0.62 and 0.36 g/L/h, respectively.
Halogenated compounds are recalcitrant environmental pollutants prevalent in agricultural fields, waste waters and industrial by-products, but they can be degraded by dehalogenase-containing microbes. Notably, 2-haloalkanoic acid dehalogenases are employed to resolve optically active chloropropionates, as exemplified by the d-specific dehalogenase from Rhizobium sp. RCI (DehD), which acts on d-2-chloropropionate but not on its l-enantiomer. The catalytic residues of this dehalogenase responsible for its affinity toward d-2-chloropropionate have not been experimentally determined, although its three-dimensional crystal structure has been solved. For this study, we performed in silico docking and molecular dynamic simulations of complexes formed by this dehalogenase and d- or l-2-chloropropionate. Arg134 of the enzyme plays the key role in the stereospecific binding and Arg16 is in a position that would allow it to activate a water molecule for hydrolytic attack on the d-2-chloropropionate chiral carbon for release of the halide ion to yield l-2-hydroxypropionate. We propose that within the DehD active site, the NH group of Arg134 can form a hydrogen bond with the carboxylate of d-2-chloropropionate with a strength of ∼4 kcal/mol that may act as an acid-base catalyst, whereas, when l-2-chloropropionate is present, this bond cannot be formed. The significance of the present work is vital for rational design of this dehalogenase in order to confirm the involvement of Arg16 and Arg134 residues implicated in hydrolysis and binding of d-2-chloropropionate in the active site of d-specific dehalogenase from Rhizobium sp. RC1.
Oil palm empty fruit bunch (EFB) was pretreated by Formiline process to overcome biomass recalcitrance and obtain hemicellulosic syrup and lignin. Higher formic acid concentration led to more lignin removal but also higher degree of cellulose formylation. Cellulose digestibility could be well recovered after deformylation with a small amount of lime. After digested by enzyme loading of 15 FPU+10 CBU/g solid for 48 h, the polysaccharide conversion could be over 90%. Simultaneous saccharification and fermentation (SSF) results demonstrated that ethanol concentration reached 83.6 g/L with approximate 85% of theoretic yield when performed at an initial dry solid consistency of 20%. A mass balance showed that via Formiline pretreatment 0.166 kg of ethanol could be produced from 1 kg of dry EFB with co-production of 0.14 kg of high-purity lignin and 5.26 kg hemicellulosic syrup containing 2.8% xylose. Formiline pretreatment thus can be employed as an entry for biorefining of EFB.
Biodegradable materials made from cassava starch and kenaf fibers were prepared using a solution casting method. Kenaf fibers were treated with NaOH, bleached with sodium chlorite and acetic buffer solution, and subsequently acid hydrolyzed to obtain cellulose nanocrystals (CNCs). Biocomposites in the form of films were prepared by mixing starch and glycerol/sorbitol with various filler compositions (0-10 wt%). X-ray diffraction revealed that fiber crystallinity increased after each stage of treatment. Morphological observations and size reductions of the extracted cellulose and CNCs were studied using field emission scanning electron microscopy and transmission electron microscopy. The effects of different treatments and filler contents of the biocomposites were evaluated through mechanical tests. Results showed that the tensile strengths and moduli of the biocomposites increased after each treatment and the optimum filler content was 6%.