Displaying publications 221 - 240 of 943 in total

Abstract:
Sort:
  1. Fulltext Supporting data for identification of biosurfactant-producing bacteria isolated from agro-food industrial effluent
    Fulazzaky MA, Abdullah S, Salim MR
    Data Brief, 2016 Jun;7:834-8.
    PMID: 27077083 DOI: 10.1016/j.dib.2016.03.058
    The goal of this study was to identify the biosurfactant-producing bacteria isolated from agro-food industrial effluet. The identification of the potential bacterial strain using a polymerase chain reaction of the 16S rRNA gene analysis was closely related to Serratia marcescens with its recorded strain of SA30 "Fundamentals of mass transfer and kinetics for biosorption of oil and grease from agro-food industrial effluent by Serratia marcescens SA30" (Fulazzaky et al., 2015) [1]; however, many biochemical tests have not been published yet. The biochemical tests of biosurfactant production, haemolytic assay and cell surface hydrophobicity were performed to investigate the beneficial strain of biosurfactant-producing bacteria. Here we do share data collected from the biochemical tests to get a better understanding of the use of Serratia marcescens SA30 to degrade oil, which contributes the technical features of strengthening the biological treatment of oil-contaminated wastewater in tropical environments.
    Matched MeSH terms: Kinetics
  2. Kinetic study on microwave-assisted esterification of free fatty acids derived from Ceiba pentandra Seed Oil
    Lieu T, Yusup S, Moniruzzaman M
    Bioresour Technol, 2016 Jul;211:248-56.
    PMID: 27019128 DOI: 10.1016/j.biortech.2016.03.105
    Recently, a great attention has been paid to advanced microwave technology that can be used to markedly enhance the biodiesel production process. Ceiba pentandra Seed Oil containing high free fatty acids (FFA) was utilized as a non-edible feedstock for biodiesel production. Microwave-assisted esterification pretreatment was conducted to reduce the FFA content for promoting a high-quality product in the next step. At optimum condition, the conversion was achieved 94.43% using 2wt% of sulfuric acid as catalyst where as 20.83% conversion was attained without catalyst. The kinetics of this esterification reaction was also studied to determine the influence of factors on the rate of reaction and reaction mechanisms. The results indicated that microwave-assisted esterification was of endothermic second-order reaction with the activation energy of 53.717kJ/mol.
    Matched MeSH terms: Kinetics
  3. Fulltext Biosorption Potential of Bacillus salmalaya Strain 139SI for Removal of Cr(VI) from Aqueous Solution
    Dadrasnia A, Chuan Wei KS, Shahsavari N, Azirun MS, Ismail S
    Int J Environ Res Public Health, 2015 Dec;12(12):15321-38.
    PMID: 26633454 DOI: 10.3390/ijerph121214985
    The present study investigated the biosorption capacity of live and dead cells of a novel Bacillus strain for chromium. The optimum biosorption condition was evaluated in various analytical parameters, including initial concentration of chromium, pH, and contact time. The Langmuir isotherm model showed an enhanced fit to the equilibrium data. Live and dead biomasses followed the monolayer biosorption of the active surface sites. The maximum biosorption capacity was 20.35 mg/g at 25 °C, with pH 3 and contact time of 50 min. Strain 139SI was an excellent host to the hexavalent chromium. The biosorption kinetics of chromium in the dead and live cells of Bacillus salmalaya (B. salmalaya) 139SI followed the pseudo second-order mechanism. Scanning electron microscopy and fourier transform infrared indicated significant influence of the dead cells on the biosorption of chromium based on cell morphological changes. Approximately 92% and 70% desorption efficiencies were achieved using dead and live cells, respectively. These findings demonstrated the high sorption capacity of dead biomasses of B. salmalaya 139SI in the biosorption process. Thermodynamic evaluation (ΔG⁰, ΔH⁰, and ΔS⁰) indicated that the mechanism of Cr(VI) adsorption is endothermic; that is, chemisorption. Results indicated that chromium accumulation occurred in the cell wall of B. salmalaya 139SI rather than intracellular accumulation.
    Matched MeSH terms: Kinetics
  4. Insights into the equilibrium, kinetic and thermodynamics of nickel removal by environmental friendly Lansium domesticum peel biosorbent
    Lam YF, Lee LY, Chua SJ, Lim SS, Gan S
    Ecotoxicol Environ Saf, 2016 May;127:61-70.
    PMID: 26802563 DOI: 10.1016/j.ecoenv.2016.01.003
    Lansium domesticum peel (LDP), a waste material generated from the fruit consumption, was evaluated as a biosorbent for nickel removal from aqueous media. The effects of dosage, contact time, initial pH, initial concentration and temperature on the biosorption process were investigated in batch experiments. Equilibrium data were fitted by the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models using nonlinear regression method with the best-fit model evaluated based on coefficient of determination (R(2)) and Chi-square (χ(2)). The best-fit isotherm was found to be the Langmuir model exhibiting R(2) very close to unity (0.997-0.999), smallest χ(2) (0.0138-0.0562) and largest biosorption capacity (10.1mg/g) at 30°C. Kinetic studies showed that the initial nickel removal was rapid with the equilibrium state established within 30min. Pseudo-second-order model was the best-fit kinetic model indicating the chemisorption nature of the biosorption process. Further data analysis by the intraparticle diffusion model revealed the involvement of several rate-controlling steps such as boundary layer and intraparticle diffusion. Thermodynamically, the process was exothermic, spontaneous and feasible. Regeneration studies indicated that LDP biosorbent could be regenerated using hydrochloric acid solution with up to 85% efficiency. The present investigation proved that LDP having no economic value can be used as an alternative eco-friendly biosorbent for remediation of nickel contaminated water.
    Matched MeSH terms: Kinetics
  5. Fulltext Sensitive Fibre-Based Thermoluminescence Detectors for High Resolution In-Vivo Dosimetry
    Ghomeishi M, Mahdiraji GA, Adikan FR, Ung NM, Bradley DA
    Sci Rep, 2015;5:13309.
    PMID: 26314683 DOI: 10.1038/srep13309
    With interest in the potential of optical fibres as the basis of next-generation thermoluminescence dosimeters (TLDs), the development of suitable forms of material and their fabrication has become a fast-growing endeavour. Present study focuses on three types of Ge-doped optical fibres with different structural arrangements and/or shapes, namely conventional cylindrical fibre, capillary fibre, and flat fibre, all fabricated using the same optical fibre preform. For doses from 0.5 to 8 Gy, obtained at electron and photon energies, standard thermoluminescence (TL) characteristics of the optical fibres have been the subject of detailed investigation. The results show that in collapsing the capillary fibre into a flat shape, the TL yield is increased by a factor of 5.5, the yield being also some 3.2 times greater than that of the conventional cylindrical fibre fabricated from the same perform. This suggests a means of production of suitably sensitive TLD for in-vivo dosimeter applications. Addressing the associated defects generating luminescence from each of the optical fibres, the study encompasses analysis of the TL glow curves, with computerized glow curve deconvolution (CGCD) and 2(nd) order kinetics.
    Matched MeSH terms: Kinetics
  6. Fulltext Thin layer drying kinetics and quality dynamics of persimmon (Diospyros kaki) treated with preservatives and solar dried under different temperatures
    Khaliq A, Li WF, Ali S, Shah ST, Ma ZH, Mao J, et al.
    PLoS One, 2022;17(3):e0265111.
    PMID: 35353819 DOI: 10.1371/journal.pone.0265111
    Poor postharvest handling, microbial infestation, and high respiration rate are some the factors are responsible for poor storage life of perishable commodities. Therefore, effective preservation of these commodities is needed to lower the damages and extend shelf life. Preservation is regarded as the action taken to maintain desired properties of a perishable commodity as long as possible. Persimmon (Diospyros kaki) is perishable fruit with high nutritive value; however, has very short shelf-life. Therefore, effective preservation and drying is needed to extend its storage life. Drying temperature and preservatives significantly influence the quality of perishable vegetables and fruits during drying. The current study investigated the effect of different temperatures and preservatives on drying kinetics and organoleptic quality attributes of persimmon. Persimmon fruits were treated with preservatives (25% honey, 25% aloe vera, 2% sodium benzoate, 1% potassium metabisulfite, and 2% citric acid solutions) under different drying temperatures (40, 45, and 50°C). All observed parameters were significantly affected by individual effects of temperatures and preservatives, except ash contents. Similarly, interactive effects were significant for all parameters except total soluble sugars, ash contents, and vitamin C. Generally, fruits treated with citric acid and dried under 50°C had 8.2% moisture loss hour-1, 14.9 drying hours, 0.030 g H2O g-1 hr-1, 1.23° Brix of total soluble solids, 6.71 pH, 1.35% acidity, and 6.3 mg vitamin C. These values were better than the rest of the preservatives and drying temperatures used in the study. Therefore, treating fruits with citric acid and drying at 50°C was found a promising technique to extend storage life of persimmon fruits. It is recommended that persimmon fruits dried at 50°C and preserved in citric acid can be used for longer storage period.
    Matched MeSH terms: Kinetics
  7. Fulltext Palm Raceme as a Promising Biomass Precursor for Activated Carbon to Promote Lipase Activity with the Aid of Eutectic Solvents
    Abed KM, Hayyan A, Elgharbawy AAM, Hizaddin HF, Hashim MA, Hasan HA, et al.
    Molecules, 2022 Dec 09;27(24).
    PMID: 36557866 DOI: 10.3390/molecules27248734
    This study concerns the role of activated carbon (AC) from palm raceme as a support material for the enhancement of lipase-catalyzed reactions in an aqueous solution, with deep eutectic solvent (DES) as a co-solvent. The effects of carbonization temperature, impregnation ratio, and carbonization time on lipase activity were studied. The activities of Amano lipase from Burkholderia cepacia (AML) and lipase from the porcine pancreas (PPL) were used to investigate the optimum conditions for AC preparation. The results showed that AC has more interaction with PPL and effectively provides greater enzymatic activity compared with AML. The optimum treatment conditions of AC samples that yield the highest enzymatic activity were 0.5 (NaOH (g)/palm raceme (g)), 150 min, and a carbonization temperature of 400 °C. DES was prepared from alanine/sodium hydroxide and used with AC for the further enhancement of enzymatic activity. Kinetic studies demonstrated that the activity of PPL was enhanced with the immobilization of AC in a DES medium.
    Matched MeSH terms: Kinetics
  8. Fulltext Synthesis and single-molecule imaging reveal stereospecific enhancement of binding kinetics by the antitumour eEF1A antagonist SR-A3
    Wang HY, Yang H, Holm M, Tom H, Oltion K, Al-Khdhairawi AAQ, et al.
    Nat Chem, 2022 Dec;14(12):1443-1450.
    PMID: 36123449 DOI: 10.1038/s41557-022-01039-3
    Ternatin-family cyclic peptides inhibit protein synthesis by targeting the eukaryotic elongation factor-1α. A potentially related cytotoxic natural product ('A3') was isolated from Aspergillus, but only 4 of its 11 stereocentres could be assigned. Here, we synthesized SR-A3 and SS-A3-two out of 128 possible A3 epimers-and discovered that synthetic SR-A3 is indistinguishable from naturally derived A3. Relative to SS-A3, SR-A3 exhibits an enhanced residence time and rebinding kinetics, as revealed by single-molecule fluorescence imaging of elongation reactions catalysed by eukaryotic elongation factor-1α in vitro. An increased residence time-stereospecifically conferred by the unique β-hydroxyl in SR-A3-was also observed in cells. Consistent with its prolonged duration of action, thrice-weekly dosing with SR-A3 led to a reduced tumour burden and increased survival in an aggressive Myc-driven mouse lymphoma model. Our results demonstrate the potential of SR-A3 as a cancer therapeutic and exemplify an evolutionary mechanism for enhancing cyclic peptide binding kinetics via stereospecific side-chain hydroxylation.
    Matched MeSH terms: Kinetics
  9. Utilization of cockle shell powder as an adsorbent to remove phosphorus-containing wastewater
    Nayeem A, Mizi F, Ali MF, Shariffuddin JH
    Environ Res, 2023 Jan 01;216(Pt 2):114514.
    PMID: 36216117 DOI: 10.1016/j.envres.2022.114514
    The paper demonstrates the capability of using cockle shells as an adsorbent for phosphorus removal from simulated petrochemical wastewater, focusing on the actual condition of the petrochemical facultative pond. In this study, the physicochemical properties of shell powder were determined, such as the functional groups, surface morphology, crystalline structure, and surface area using FTIR, SEM, EDX, XRD, and BET. It was observed that the optimum conditions for effective phosphorus removal are under the presence of rotational speed (125 rpm), higher dosage (7 g/L), and larger surface area (smaller particle size) of the shell powder. Fine powder achieved up to 52.27% of phosphorus removal after 40 min compared to coarse powder which could only give 16.67% removal. Additionally, calcined shell powder demonstrated a higher phosphorus removal rate, i.e., up to 62.37%, compared to raw shell powders. The adsorption isotherm was studied using Langmuir and Freundlich models, but the isothermal data fit better for the Freundlich model (R2 = 0.9836). Overall, this study has successfully generated a greener and low-cost adsorbent.
    Matched MeSH terms: Kinetics
  10. Decoration of polylactic acid on graphene oxide for efficient adsorption of methylene blue and tetracycline
    Nouri A, Ang WL, Mahmoudi E, Chua SF, Mohammad AW, Benamor A, et al.
    Chemosphere, 2023 May;322:138219.
    PMID: 36828108 DOI: 10.1016/j.chemosphere.2023.138219
    Decorating nanomaterials on graphene oxide (GO) can enhance its adsorption capacity and removal efficiency of water pollutants. In this study, for the first time, nano-sized polylactic acid (PLA) has been successfully decorated on the surface of GO through a facile synthesis approach. The adsorptive efficiency of GO-PLA for removing methylene blue (MB) and tetracycline (TC) from an aqueous solution was examined. The characterization confirmed the successful decoration of PLA on GO nanosheets with the nano size of PLA. It was hypothesized that the PLA was decorated on the surface of GO through covalent bonding between oxygen-containing functional groups and lactide molecules. The optimum adsorption parameters determined were at the adsorbent dose of 0.5 g L-1, pH 4, contact time of 120 min, and temperature of 318 K. The pseudo-second-order kinetic model described the contaminants' adsorption behaviour, and the intraparticle diffusion model revealed that both surface adsorption and intraparticle diffusion controlled the adsorption process. Langmuir isotherm model best described the adsorption behaviour of the pollutants on GO-PLA and demonstrated the maximum monolayer uptake capacities of MB (332.5 mg g-1) and TC (223.7 mg g-1). The adsorption results indicated that the uptake capacities of GO-PLA in comparison to GO have increased by approximately 70% and 110% for MB and TC, respectively. These observations reflect the remarkable role of nano-sized PLA that enhanced the adsorption capacity due to its additional functional group and larger surface area.
    Matched MeSH terms: Kinetics
  11. Using fish scales as a new biosorbent for adsorption of nickel and copper ions from wastewater and investigating the effects of electric and magnetic fields on the adsorption process
    Javad Sajjadi Shourije SM, Dehghan P, Bahrololoom ME, Cobley AJ, Vitry V, Pourian Azar GT, et al.
    Chemosphere, 2023 Mar;317:137829.
    PMID: 36640980 DOI: 10.1016/j.chemosphere.2023.137829
    In this study, fish scales (Pomadasys kaakan's scales) were used as new biosorbent for removing Ni2+ and Cu2+ ions from wastewater. The effects of electric and magnetic fields on the absorption efficiency were also investigated. The effects of sorbent content, ion concentration, contact time, pH, electric field (EF), and magnetic field (MF) on absorption efficiency were assertained. In addition, the isotherm of absorption was studied in this work. This study revealed that electric field and magnetic field have significant effects on the absorption efficiency of ions from wastewater. An increase in the electric field enhanced the removal percentage of the ions and accelerated the absorption process by up to 40% in comparison with the same condition without an electric field or a magnetic field. By increasing contact time from 10 to 120 min, the removal of Ni2+ ions was increased from 1% to 40% and for Cu2+ ions, the removal increased from 20% to almost 95%, respectively. In addition, increasing pH, ion concentration and scales dose increased removal percentage effectively. The results indicated that using fish scales for Cu2+ ions absorption is ideal due to the very high removal percentage (approximately 95%) without using either an electric or magnetic field.
    Matched MeSH terms: Kinetics
  12. Parametric and kinetic studies of activated sludge dewatering by cationic chitosan-like bioflocculant BF01314 produced from Citrobacter youngae
    Mohamed Hatta NS, Lau SW, Chua HB, Takeo M, Sen TK, Mubarak NM, et al.
    Environ Res, 2023 May 01;224:115527.
    PMID: 36822539 DOI: 10.1016/j.envres.2023.115527
    Bacterial strains belonging to Citrobacter spp. were reported to produce polysaccharides consisting of N-acetylglucosamine and glucosamine like chitosan, with high flocculation activity. In this work, the flocculation dewatering performance of activated sludge conditioned by a novel cationic chitosan-like bioflocculant (BF) named BF01314, produced from Citrobacter youngae GTC 01314, was evaluated under the influences of flocculant dosage, pH, and temperature. At BF dosage as low as 0.5 kg/t DS, the sludge dewaterability was significantly enhanced in comparison to the raw (untreated) sludge, featuring well-flocculated characteristic (reduction in CST from 22.0 s to 9.4 s) and good sludge filterability with reduced resistance (reduction in SRF by one order from 7.42 × 1011 to 9.59 × 1010 m/kg) and increased compactness of sludge (increase in CSC from 15.2 to 23.2%). Besides, the BF demonstrated comparable high sludge dewatering performance within the pH range between 2 and 8, and temperature range between 25 °C and 80 °C. Comparison between the BF, the pristine chitosan and the commercial cationic copolymer MF 7861 demonstrated equivalent performance with enhanced dewaterability at the dosage between 2.0 and 3.0 kg/t DS. Besides, the BF demonstrated strong flocculation activity (>99%) when added to the sludge suspension using moderate to high flocculation speeds (100-200 rpm) with at least 3-min mixing time. The BF's reaction in sludge flocculation was best fitted with a pseudo first-order kinetic model. Electrostatic charge patching and polymer bridging mechanisms are believed to be the dominant mechanistic phenomena during the BF's sludge conditioning process (coagulation-flocculation).
    Matched MeSH terms: Kinetics
  13. Enhanced adsorption-photodegradation of tetracycline using Ce-N-co-doped AC/TiO2 photocatalyst: isotherms, kinetics, mechanism, and thermodynamic insight
    Rahman NAAA, Khasri A, Salleh NHM, Jamir MRM
    Environ Sci Pollut Res Int, 2024 Oct;31(49):59398-59415.
    PMID: 39354260 DOI: 10.1007/s11356-024-34948-6
    Excessive use of tetracycline (TC) is alarming owing to its increased detection in water systems. In this study, a photocatalyst was developed to degrade TC using a Ce-N-co-doped AC/TiO2 photocatalyst, denoted as Ce/N-AC/TiO2, prepared using the sol-gel method assisted by microwave radiation, speeding up the synthesis process. Ce/N-AC/TiO2 achieved maximum TC degradation of 93.1% under UV light with optimum sorption system conditions of an initial concentration of 10 mg L-1, pH 7, and 30 ℃, under 120 min. Scavenger experiments revealed that holes and superoxide radicals were the active species influencing the photodegradation process. The TC degradation was appropriately fitted with Langmuir isotherms and a pseudo-second-order (PSO) kinetic model. The change in enthalpy (ΔH) (2.43 kJ mol-1), entropy (ΔS) (0.024 kJ mol-1), and Gibbs free energy (ΔG) (- 4.941 to - 5.802 kJ mol-1) suggested that the adsorption process was spontaneous, favourable, and endothermic. Electrostatic interaction, hydrogen bonding, pore-filling, cationic-π, n-π, and π-π interaction were among the interactions involved between TC and Ce/N-AC/TiO2. Furthermore, Ce/N-AC/TiO2 stability was confirmed through 80% removal efficiency even after the fifth reuse cycle. Notably, this work provides new insight into the production of efficient, reusable, and enhanced photocatalysts using a rapid and cost-effective microwave-assisted synthesis process for pollutant remediation.
    Matched MeSH terms: Kinetics
  14. Fulltext Scalable mesoporous biochars from bagasse waste for Cu (II) removal: Process optimisation, kinetics and techno-economic analysis
    Bongosia JG, Al-Gailani A, Kolosz BW, Loy Chun Minh A, Lock SSM, Cheah KW, et al.
    J Environ Manage, 2024 Nov;370:122558.
    PMID: 39303585 DOI: 10.1016/j.jenvman.2024.122558
    As the world faces the brink of climatological disaster, it is crucial to utilize all available resources to facilitate environmental remediation, especially by accommodating waste streams. Lignocellulosic waste residues can be transformed into mesoporous biochar structures with substantial pore capacity. While biochars are considered a method of carbon dioxide removal (CDR), they are in fact an environmental double-edged sword that can be used to extract metal ions from water bodies. Biochars possess high chemical affinities through chemisorption pathways that are tuneable to specific pH conditions. This work demonstrates how biochars can be enhanced to maximise their surface area and porosity for the removal of Cu (II) in solution. It was found that bagasse derived mesoporous biochars operate preferentially at high pH (basic conditions), with the 1.18 mKOH/mSCB material reaching 97.85% Cu (II) removal in 5 min. This result is in stark contrast with the majority of biochar adsorbents that are only effective at low pH (acidic conditions). As a result, the biochars produced in this work can be directly applied to ancestral landfill sites and carbonate-rich mine waters which are highly basic by nature, preventing further metal infiltration and reverse sullied water supplies. Furthermore, to assess the value in the use of biochars produced and applied in this way, a techno-economic assessment was carried out to determine the true cost of biochar synthesis, with possible routes for revenue post-Cu being removed from the biochar.
    Matched MeSH terms: Kinetics
  15. Discovery of Sulfanilamide-diazo Derivatives Incorporating Benzoic Acid Moieties as Novel Inhibitors of Human Carbonic Anhydrase II Activity
    Belani F, Mehrabi M, Adibi H, Mehrabi M, Khodarahmi R
    Curr Protein Pept Sci, 2025;26(3):226-240.
    PMID: 39648421 DOI: 10.2174/0113892037332139241008054602
    BACKGROUND: Sulfonamides are widely used carbonic anhydrase inhibitors (CAIs) in clinical settings, however, their nonspecific inhibition of multiple carbonic anhydrase isoforms can lead to reduced efficacy and side effects. This study aimed to develop sulfanilamide-diazo derivatives incorporating benzoic acid moieties as novel inhibitors of hCA II activity to reduce side effects and enhance selectivity for different CA isozymes.

    METHODS: We investigated the interaction between these derivatives and the hCA II isozyme via various spectroscopic and docking methods.

    RESULTS: The kinetic data demonstrates that compound 1 (C1) and compound 2 (C2) share a similar inhibitory strength against hCA II, effectively inhibiting its esterase activity through a noncompetitive mechanism with Ki values at low micromolar levels. Fluorescence measurements indicated that the synthesized compounds suppressed the inherent fluorescence of hCA II via a static quenching process, with each compound showing a singular binding site within the enzyme. Thermodynamic evidences highlight the significance of van der Waals interactions and hydrogen bonding in the binding process. The results of molecular docking indicated that both C1 and C2 effectively obstruct the entrance to hCA II's active site, with no significant differences in their binding conformations.

    CONCLUSION: While C1 and C2 exhibit CA inhibitory potency lower than that of sulfonamide compounds, this study offers valuable insights that could pave the way for the development of a promising scaffold for designing new carbonic anhydrase inhibitors.

    Matched MeSH terms: Kinetics
  16. Structure-Guided Engineering of Cu/Zn Superoxide Dismutase for Enhanced Catalytic Efficiency and Thermostability
    Al-Adeeb A, Muhammad Aqeel S, Al-Jaberi HS, Gu Q, Al-Ansi W, Al-Maqtari QA, et al.
    J Agric Food Chem, 2026 Oct 28;74(42):33165-33183.
    PMID: 42949349 DOI: 10.1021/acs.jafc.6c10478
    Cu/Zn superoxide dismutase (Cu/Zn-SOD) is a key antioxidant enzyme that catalyzes superoxide radical dismutation. Here, an integrated computational-assisted, structure-guided engineering strategy was applied to improve Cu/Zn-SOD catalytic performance. Gln22 and Glu134 were identified as promising engineering sites, and saturation mutagenesis yielded Q22I and E134 M as the most beneficial single substitutions, with specific activities 1.55- and 2.39-fold higher than wild type (WT), respectively. Combining both substitutions generated M2 (Q22I/E134M), which showed the highest specific activity of 7121.0 U mg-1, corresponding to a 3.43-fold increase over WT. The optimal temperature of Q22I and M2 increased from 40 to 50 °C, and M2 also exhibited enhanced thermostability. Kinetic analysis showed that M2 had a 41.18% lower Km and a 2.95-fold higher Vmax than WT. Molecular docking suggested complementary effects of Q22I and E134 M on structural stability and active-site optimization, supporting improved catalytic performance. These findings provide a basis for engineering efficient, thermostable SODs.
    Matched MeSH terms: Kinetics
  17. Chemical and biological combined treatment for sugarcane vinasse: selection of parameters and performance studies
    Kee WC, Wong YS, Ong SA, Lutpi NA, Sam ST, Dahalan FA, et al.
    Environ Sci Pollut Res Int, 2023 May;30(24):65364-65378.
    PMID: 37081370 DOI: 10.1007/s11356-023-27046-6
    Sugarcane vinasse has been reported as a high strength industrial wastewater that could cause severe environmental pollution due to its complex and bio-refractory compounds. Thus, the combined coagulation and sequencing batch biofilm reactor (SBBR) system was employed for the sugarcane vinasse treatment. This study aims to determine the recommended conditions of various parameters under coagulation and SBBR and investigate the effectiveness of combined processes. First, the approach of the coagulation process could achieve the maximum COD reduction and decolorization efficiencies of 79.0 ± 3.4% and 94.1 ± 1.9%, respectively, under the recommended conditions. Next, SBBR as an integrated biofilm reactor showed excellent synergistic biodegradability, removing 86.6 ± 4.3% COD concentration and 94.6 ± 3.8% color concentration at 3.0 g·COD/L of substrate loading concentration. The kinetic studies of SBBR revealed that the first-order kinetic model was the best fit for COD reduction efficiency. In contrast, the second-order kinetic model was the best fit for decolorization efficiency. The SBBR reaction was further investigated by ultraviolet-visible spectrophotometry (UV-Vis). In the combined processes, SBBR followed by the coagulation process (SBBR-CP) showed greater COD reduction and decolorization efficiencies (97.5 ± 0.3 and 99.4 ± 0.1%) when compared to the coagulation process followed by SBBR (CP-SBBR). This study demonstrated the removal performance and potential application of the combined sequential process to produce effluent that can be reused for bioethanol production and fertigation. This finding provides additional insight for developing effective vinasse treatment using combined chemical and biological processes.
    Matched MeSH terms: Kinetics
  18. Fabrication and response optimization of Moringa oleifera-functionalized nanosorbents for the removal of diesel range organics from contaminated water
    Ubah PC, Dashti AF, Saaid M, Imam SS, Adnan R
    Environ Sci Pollut Res Int, 2023 Jan;30(2):4462-4484.
    PMID: 35969341 DOI: 10.1007/s11356-022-22245-z
    The purpose of this research is to synthesize environmentally friendly nanosorbents for the novel adsorption of diesel range organics (DRO) from contaminated water. Central composite design (CCD) analysis of response surface methodology (RSM) was employed in a model fitting of the variables predicting the adsorption efficiency of Moringa oleifera-functionalized zerovalent iron particles (ZINPs) for the removal of DRO. The effects of the reaction parameters on the response were screened using 24 factorial designs to determine the statistically significant independent variables. A quadratic model predicting the DRO adsorption efficiency of ZINPs with an F value of 276.84 (p value 
    Matched MeSH terms: Kinetics
  19. A comprehensive review on adsorption of methylene blue dye using leaf waste as a bio-sorbent: isotherm adsorption, kinetics, and thermodynamics studies
    Mussa ZH, Al-Ameer LR, Al-Qaim FF, Deyab IF, Kamyab H, Chelliapan S
    Environ Monit Assess, 2023 Jul 12;195(8):940.
    PMID: 37436672 DOI: 10.1007/s10661-023-11432-1
    Water bodies with the dye methylene blue pose serious environmental and health risks to humans. Therefore, the creation and investigation of affordable, potential adsorbents to remove methylene blue dye from water resources as a long-term fix is one focus of the scientific community. Food plants and other carbon-source serve as a hotspot for a wider range of application on different pollutants that impact the environment and living organisms. Here, we reviewed the use of treated and untreated biosorbents made from plant waste leaves for removing the dye methylene blue from aqueous media. After being modified, activated carbon made from various plant leaves improves adsorption performance. The range of activating chemicals, activation methods, and bio-sorbent material characterisation using FTIR analysis, Barunauer-Emmett-Teller (BET) surface area, scanning electron microscope (SEM-EDX), and SEM-EDX have all been covered in this review. It has been thoroughly described how the pH solution of the methylene blue dye compares to the pHPZC of the adsorbent surface. The presentation also includes a thorough analysis of the application of the isotherm model, kinetic model, and thermodynamic parameters. The selectivity of the adsorbent is the main focus of the adsorption kinetics and isotherm models. It has been studied how adsorption occurs, how surface area and pH affect it, and how biomass waste compares to other adsorbents. The use of biomass waste as adsorbents is both environmentally and economically advantageous, and it has been discovered to have exceptional color removal capabilities.
    Matched MeSH terms: Kinetics
  20. Inverse vulcanization induced oxygen modified porous polysulfides for efficient sorption of heavy metals
    Lyu S, Abidin ZZ, Yaw TCS, Resul MFMG
    Environ Sci Pollut Res Int, 2024 Mar;31(11):16940-16957.
    PMID: 38326685 DOI: 10.1007/s11356-024-32323-z
    The applications of polysulfides derived from natural plant oil and sulfur via the inverse vulcanization in the removal of heavy metals from aqueous solutions suffered from their low porosity and scarce surface functionality because of their hydrophobic surfaces and bulk characteristics. In this study, polysulfides from sulfur and palm oil (PSPs) with significantly enhanced porosity (13.7-24.1 m2/g) and surface oxygen-containing functional groups (6.9-8.6 wt.%) were synthesized with the optimization of process conditions including reaction time, temperature, and mass ratios of sulfur/palm oil/NaCl/sodium citrate. PSPs were applied as sorbents to remove heavy metals present in aqueous solutions. The integration of porosity and oxygen modification allowed a fast kinetic (4.0 h) and enhanced maximum sorption capacities for Pb(II) (218.5 mg/g), Cu(II) (74.8 mg/g), and Cr(III) (68.4 mg/g) at pH 5.0 and T 298 K comparing with polysulfides made without NaCl/sodium citrate. The sorption behaviors of Pb(II), Cu(II), and Cr(III) on PSPs were highly dependent on the solution pH values and ionic strength. The sorption presented excellent anti-interference capability for the coexisting cations and anions. The sorption processes were endothermic and spontaneous. This work would guide the preparation of porous polysulfides with surface modification as efficient sorbents to remediate heavy metals from aqueous solutions.
    Matched MeSH terms: Kinetics
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links