In this work; a response surface methodology (RSM) was implemented to investigate the process variables in a hydrogen production system. The effects of five independent variables; namely the temperature (X₁); the flow rate (X₂); the catalyst weight (X₃); the catalyst loading (X₄) and the glycerol-water molar ratio (X₅) on the H₂ yield (Y₁) and the conversion of glycerol to gaseous products (Y₂) were explored. Using multiple regression analysis; the experimental results of the H₂ yield and the glycerol conversion to gases were fit to quadratic polynomial models. The proposed mathematical models have correlated the dependent factors well within the limits that were being examined. The best values of the process variables were a temperature of approximately 600 °C; a feed flow rate of 0.05 mL/min; a catalyst weight of 0.2 g; a catalyst loading of 20% and a glycerol-water molar ratio of approximately 12; where the H₂ yield was predicted to be 57.6% and the conversion of glycerol was predicted to be 75%. To validate the proposed models; statistical analysis using a two-sample t-test was performed; and the results showed that the models could predict the responses satisfactorily within the limits of the variables that were studied.
A new species of lowland freshwater crab of the family Gecarcinucidae, Salangathelphusa peractio, is described from Langkawi, an island off the northwestern coast of peninsular Malaysia. Salangathelphusa peractiosp. n. can be separated from S. brevicarinata (Hilgendorf, 1882) in having a proportionately broader external orbital tooth, a distinctly concave posterolateral margin, and the terminal segment of the male first gonopod is not distinctly bent laterally outwards; and from S. anophrys (Kemp, 1923) by its more quadrate carapace and the terminal segment of the male first gonopod possessing a relatively longer and less curved distal part. This is sixth wholly freshwater brachyuran species known from the island.
—Anaerobic digestion (AD) of biomass is a well-established process to produce renewable energy, where organic matter is converted to biogas by microorganism. High solid content and complex structure of sludge-derived organic matter, methane production during digestion is limited at the hydrolysis step. Therefore pre-treatment of substrate is a way to accelerate the hydrolysis step. This study aimed to identify the optimum pre-treatment method to increase the methane production from poultry waste prior anaerobic digestion. The poultry waste was mixed with water, pre-treated, seeded with inoculums. Chemical and thermochemical pre-treatment were performed with NaOH and Ca(OH)2. The AD was conducted in bioreactors and incubated in water bath at 37 °C for 15 days. Results obtained show that the highest methane yield was at the thermochemical pre-treatment with Ca(OH)2 with cumulative amount of methane at 1665.17 ppm followed by chemical pre-treatment with Ca(OH)2, thermochemical pre-treatment with NaOH and chemical pre-treatment with NaOH with cumulative amount of methane at 1381.76 ppm, 884.07 ppm and 607.98 ppm respectively. Based on the comparison of the results, the thermochemical pre-treatment with Ca(OH)2 is the best pre-treatment as it produced the highest methane yield.
In this work, poly(MBAAm-co-SBMA) zwitterionic polymer nanoparticles were synthesized in one-step via distillation-precipitation polymerization (DPP) and were characterized. [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) as monomer and N, N'-methylene bis(acrylamide) (MBAAm) as cross-linker are used for the synthesis of nanoparticles. As far as our knowledge, this is the first such report on the synthesis of poly(MBAAm-co-SBMA) nanoparticles via DPP. The newly synthesized nanoparticles were further employed for the surface modification of polysulfone (PSF) hollow fiber membranes for dye removal. The modified hollow fiber membrane exhibited the improved permeability (56 L/ m2 h bar) and dye removal (>98% of Reactive Black 5 and >80.7% of Reactive orange 16) with the high permeation of salts. Therefore, the as-prepared membrane can have potential application in textile and industrial wastewater treatment.
In this study, caged calcium alginate-caged multiwalled carbon nanotubes dispersive microsolid phase extraction was described for the first time for the extraction of polycyclic aromatic hydrocarbons (PAHs) from water samples prior to gas chromatographic analysis. Fluorene, phenanthrene and fluoranthene were selected as model compounds. The caged calcium alginate-caged multiwalled carbon nanotubes was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and thermal gravimetry analyses. The effective parameters namely desorption solvent, solvent volume, extraction time, desorption time, the mass of adsorbent and sample volume were optimized. Under the optimum extraction conditions, the developed method showed good linearity in the range of 0.5-50 ng mL-1 (R2 ≥ 0.996), low limits of detection and quantification (0.42-0.22 ng mL-1) (0.73-1.38 ng mL-1) respectively, good relative recoveries (71.2-104.2%) and reproducibility (RSD 1.8-12.4%, n = 3) for the studied PAHs in water sample. With high enrichment factor (1,000), short extraction time (<30 min), low amounts of adsorbent (100 mg) and low amounts of solvent (0.1 mol) have proven that the microsolid phase extraction method based on calcium alginate-caged multiwalled carbon nanotubes are environmentally friendly and convenient extraction method to use as an alternative adsorbent in the simultaneous preconcentration of PAHs from environmental water samples.
Matched MeSH terms: Water Pollutants, Chemical/analysis*; Water Pollutants, Chemical/isolation & purification; Water Pollutants, Chemical/chemistry
Along with the mysteries of their ecology, freshwater eels have fascinated biologists for centuries. However, information concerning species diversity, geographic distribution, and life histories of the tropical anguillid eels in the Indo-Pacific region are highly limited. Comprehensive research on the species composition, distribution and habitat use among tropical anguillid eels in the Peninsular Malaysia were conducted for four years. A total of 463 specimens were collected in the northwestern peninsular area. The dominant species was A. bicolor bicolor constituting of 88.1% of the total eels, the second one was A. bengalensis bengalensis at 11.7%, while A. marmorata was the least abundant at 0.2%. A. bicolor bicolor was widely distributed from upstream to downstream areas of the rivers. In comparison, A. bengalensis bengalensis preferred to reside from the upstream to midstream areas with no tidal zones, cooler water temperatures and higher elevation areas. The habitat preference might be different between sites due to inter-species interactions and intra-specific plasticity to local environmental conditions. These results suggest that habitat use in the tropical anguillid eels might be more influenced by ambient environmental factors, such as salinity, temperature, elevation, river size and carrying capacity, than ecological competition, such as interspecific competition.
Brunei Bay, which receives freshwater discharge from four major rivers, namely Limbang, Sundar, Weston and Menumbok, hosts a luxuriant mangrove cover in East Malaysia. However, this relatively undisturbed mangrove forest has been less scientifically explored, especially in terms of vegetation structure, ecosystem services and functioning, and land-use/cover changes. In the present study, mangrove areal extent together with species composition and distribution at the four notified estuaries was evaluated through remote sensing (Advanced Land Observation Satellite-ALOS) and ground-truth (Point-Centred Quarter Method-PCQM) observations. As of 2010, the total mangrove cover was found to be ca. 35,183.74 ha, of which Weston and Menumbok occupied more than two-folds (58%), followed by Sundar (27%) and Limbang (15%). The medium resolution ALOS data were efficient for mapping dominant mangrove species such asNypa fruticans,Rhizophora apiculata,Sonneratia caseolaris,S. albaandXylocarpus granatumin the vicinity (accuracy: 80%). The PCQM estimates found a higher basal area at Limbang and Menumbok-suggestive of more mature vegetation, compared to Sundar and Weston. Mangrove stand structural complexity (derived from the complexity index) was also high in the order of Limbang > Menumbok > Sundar > Weston and supporting the perspective of less/undisturbed vegetation at two former locations. Both remote sensing and ground-truth observations have complementarily represented the distribution ofSonneratiaspp. as pioneer vegetation at shallow river mouths,N. fruticansin the areas of strong freshwater discharge,R. apiculatain the areas of strong neritic incursion andX. granatumat interior/elevated grounds. The results from this study would be able to serve as strong baseline data for future mangrove investigations at Brunei Bay, including for monitoring and management purposes locally at present.
Arabinoxylans (AXs) are major dietary fibre in cereals. Recently, AXs have attracted a great deal of attention because of their biological activities. These activities have been suggested to be related to the content of low molecular weight (Mw) AXs, in particular those with Mw below 32 kDa. Rice bran is a rich source of AXs. However, water extraction of AXs is difficult and often gives low yield. Extrusion processing has been used to increase the solubility of cereal dietary fibre. The aim of this research was to study the effect of extrusion screw-speeds (80 and 160) rpm on the extraction yield and Mw of water extractable AXs from rice bran. It was found that the extraction of AXs increased significantly with an increase in screw speed and was accompanied by a significant decrease in the Mw of AXs from extruded rice bran. The percentage of very low molecular weight AXs (0.79-1.58 kDa) significantly increased with increasing screw speed.
Little is known on the biosafety level of Vibrio spp. in freshwater fish in Malaysia. The purpose of this study was to investigate the prevalence and concentration of Vibrio spp. and V. parahaemolyticus in
freshwater fish using the Most Probable Number-Polymerase Chain Reaction (MPN-PCR) method. The study was conducted on 150 samples from two types of freshwater fish commonly sold at hypermarkets, i.e. Pangasius hypophthalmus (catfish) and Oreochromis sp. (red tilapia). Sampling was done on the flesh, intestinal tract and gills of each fish. The prevalence of Vibrio spp. and V. parahaemolyticus was found to be 98.67% and 24% respectively with higher percentages detected in samples from the gills followed by the intestinal tract and flesh. Vibrio spp. was detected in almost all red tilapia and catfish samples. V. parahaemolyticus was detected in 25% of the catfish samples compared to 22.6% of red tilapia fish. The density of Vibrio spp. and V. parahaemolyticus in the samples ranged from 0 to 1.1x107 MPN/g. Although the maximum value was 1.1x107 MPN/g, most samples had microbial loads ranging from 0 to >104 MPN/g. The outcome on the biosafety assessment of Vibrio spp. and V. parahaemolyticus in freshwater fish indicates another potential source of food safety issues to consumers.
The effect of degree of hydrolysis (DH) on the physicochemical properties of cobia frame hydrolysate was determined. Three levels of degree of hydrolysis of cobia frame hydrolysate were studied, which were 53%, 71% and 96%. After enzymatic hydrolysis using Alcalase®, the samples were spray-dried. Cobia hydrolysate powder samples were analyzed for their proximate analysis and physicochemical properties. The proximate analysis showed significant differences in fat and ash content only. DH96 hydrolysate showed desirable essential amino acid profile for human requirement except for methionine and isoleucine. The study found that cobia frame hydrolysate had good colour, emulsifying capacity and excellent foaming properties. However, there were no significant differences in water-holding capacity, oil-holding capacity and peptide solubility among the hydrolysate samples. This study suggested that cobia frame hydrolysate is a potential ingredient and foaming agent for food industry.
Dough mixing and thermal properties including the pasting profiles of various commercial wheat flour (WF)-banana pseudostem flour (BP)-hydrocolloid blends were determined using a farinograph, differential scanning calorimetry (DSC) and a rapid-visco analyser (RVA). The prepared blends were WF, WF substituted with 10% BP (10BP) and 10BP with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (10BPX and 10BPC, respectively). The dough of 10BP and the doughs containing XG or CMC reduced stability and breakdown time compared with the WF dough. All dough containing BP demonstrated greater water absorption and mixing tolerance index values than the WF dough. The substitution of 10% BP into WF and the addition of hydrocolloids did not significantly affect the conclusion temperature (Tc) of the mixture, but did increased the onset temperature (To), peak temperature (Tp) and decreased the gelatinisation enthalpy change (ΔHg) of the blends. Samples of 10BP, 10BPX and 10BPC significantly decreased (p
Young and mature leaves of Terminalia catappa of alcoholic and aqueous extracts were evaluated for in vitro antibacterial activity against Vibrio sp. isolated from aquatic animals. Young leaves of T. catappa showed higher antibacterial activity when compared to mature leaves against Vibrio parahemolyticus, with methanolic and aqueous extracts exhibited the largest inhibition zones, 23 and 24 mm, respectively as determined by disc diffusion technique. Ethanolic extract of young leaves showed the lowest MIC and MBC at 3.13 mg/ml and 6.25 mg/ml, respectively. Both alcoholic and aqueous extracts of young and matures leaves exhibit variations in protein, RNA as well as pyrine and pyrimidines leakage of Vibrio sp. Cell membrane disruption is proposed as the mechanism of action of T. catappa leaves extract against Vibrio sp.
The aim of this study was to evaluate the effect of barrel temperature and flour types on the residence time and physical properties of various flour extrudates. Corn flour, rice flour, corn flour with potato starch (30% w/w, d.b), and rice flour with potato starch (30%w/w, d.b) were extruded at screw speed of 75rpm, feed moisture at 25% (w/w, w.b.), barrel temperature ranging from 80°C to 140°C and die size of 1.88mm. The extrudates were dried at 50°C overnight and further analysed. Results showed that an increase in extruder barrel temperature decreased the residence time of the flours in the extruder (from 4.11-11.32min to 2.24-6.76min), but increased the expansion ratio, rehydration ratio, water absorption index, water solubility index and b value of the extrudate (p≤0.05). The extrudates had the mean residence time and physical properties of rice flour
Gelatin from sutchi catfish (Pangasius hypophthalmus) skin was extracted and applied in the preparation of gummy in order to determine the suitability of sutchi catfish gelatin in gummy production. The skin was subjected to pre-treatment in the following sequence; 0.8M NaCl, 0.19 N NaOH followed by 0.12 N acetic acid prior to 12 hours extraction in distilled water at 50oC. The physicochemical characteristics of sutchi catfish gelatin was analysed and compared with the commercial bovine gelatin. Gummy added with sutchi catfish gelatin was also compared with gummy added with commercial gelatin. Analysis comprises of yield, gel strength, setting point and setting time, amino acid composition, texture profile analysis and sensory evaluation. The extraction resulted in 14.47% yield of gelatin. Sutchi catfish gelatin showed higher gel strength value (360.86 g) compared to the commercial gelatin (217.37 g) which is in accordance with proline content. Texture profile analysis showed that gummies prepared using sutchi catfish gelatin had significantly higher (p
The efficient oxidative removal of persistent organic components in wastewater relies on low-cost heterogeneous catalysts that offer high catalytic activity, stability, and recyclability. Here, we designed a series of nanostructured Co-Mn containing perovskite catalysts, LaCo1-xMnxO3+δ (LCM, x = 0, 0.3, 0.5, 0.7, and 1.0), with over-stoichiometric oxygen (δ > 0) to show superior catalytic activity for the degradation of a variety of persistent aqueous organic pollutants by activating peroxymonosulfate (PMS). The nature of LCM for catalysis was comprehensively investigated. A "volcano-shaped" correlation was observed between the catalytic activity and electron filling (eg) of Co in LCM. Among these compounds, LaCo0.5Mn0.5O3+δ (LCM55) exhibited an excellent activity with eg = 1.27. The high interstitial oxygen ion diffusion rate (DO2- = 1.58 ± 0.01 × 10-13 cm2 s-1) of LCM55 also contributes to its catalytic activity. The enhanced stability of LCM55 can be ascribed to its stronger relative acidity (3.22). Moreover, an increased solution pH (pH ≥ 7) generated a faster organic degradation rate and a decrease in metal leaching (0.004 mM) for LCM55 perovskite, justifying it as a potential material for environmental remediation.
In this work, a novel membrane crystallization system was used to crystallize micro-sized seeds of piroxicam monohydrate by reverse antisolvent addition. Membrane crystallization seeds were compared with seeds produced by conventional antisolvent addition and polymorphic transformation of a fine powdered sample of piroxicam form I in water. The membrane crystallization process allowed for a consistent production of pure monohydrate crystals with narrow size distribution and without significant agglomeration. The seeds were grown in 350 g of 20:80w/wacetone-water mixture. Different seeding loads were tested and temperature cycling was applied in order to avoid agglomeration of the growing crystals during the process. Focused beam reflectance measurement (FBRM); and particle vision and measurement (PVM) were used to monitor crystal growth; nucleation and agglomeration during the seeded experiments. Furthermore; Raman spectroscopy was used to monitor solute concentration and estimate the overall yield of the process. Membrane crystallization was proved to be the most convenient and consistent method to produce seeds of highly agglomerating compounds; which can be grown via cooling crystallization and temperature cycling.
Despite wide applications in industries, phenol pollution leads to many health effects, and one of the technologies used to clean up phenol pollution is phytoremediation. The aim of this research was to assess the remediation ability of Ipomoea aquatica Forssk., which is easy to handle and and has a fast growth rate. Plantlet was grown in water spiked with 0.05, 0.10, 0.20, 0.30 and 0.40 g/L phenol, followed by daily observation of the plantlets morphology and tracking of phenol concentration in the water and plantlet extracts via 4-aminoantipyrine (4-AAP) assay. Plantlet’s roots in 0.10 g/L phenol (57.42 ± 1.41 mm) were significantly longer (p < 0.05) than those of the control plantlets (43.57 ± 3.87 mm) in contrast to other phenol concentrations which had stunted roots growth. I. aquatica Forssk. was able to survive with 0.30 g/L phenol despite exhibiting yellowing of leaves and increased sensitivity to scarring on the stems. The plantlets were able to completely remove the phenol from the water spiked with phenol at 0.05 g/L after 12 days of growth. However, the highest average rate of phenol removal was 0.021 g/L/day from water spiked with 0.30 g/L phenol. Phenol analysis on the plantlets’ extracts revealed that I. aquatica Forssk. had degraded the absorbed phenol. This observation is of significant interest as it highlights the
potential of I. aquatica Forssk. for use as a phytoremediator to clean up phenol contaminated water.
Functional surfaces and polymers with branched structures have a major impact on physicochemical properties and performance of membrane materials. With the aim of greener approach for enhancement of permeation, fouling resistance and detrimental heavy metal ion rejection capacity of polyetherimide membrane, novel grafting of poly (4-styrenesulfonate) brushes on low cost, natural bentonite was carried out via distillation-precipitation polymerisation method and employed as a performance modifier. It has been demonstrated that, modified bentonite clay exhibited significant improvement in the hydrophilicity, porosity, and water uptake capacity with 3 wt. % of additive dosage. SEM and AFM analysis showed the increase in macrovoides and surface roughness with increased additive concentration. Moreover, the inclusion of modified bentonite displayed an increase in permeation rate and high anti-irreversible fouling properties with reversible fouling ratio of 75.6%. The humic acid rejection study revealed that, PEM-3 membrane having rejection efficiency up to 87.6% and foulants can be easily removed by simple hydraulic cleaning. Further, nanocomposite membranes can be significantly employed for the removal of hazardous heavy metal ions with a rejection rate of 80% and its tentative mechanism was discussed. Conspicuously, bentonite clay-bearing poly (4-styrenesulfonate) brushes are having a synergistic effect on physicochemical properties of nanocomposite membrane to enhance the performance in real field applications.
There has been increasing interest in the study of Blastocystis in the last two decades. Many studies have been carried out in human and animal hosts including environmental sources, but there is little or no information on the occurrence of Blastocystis in water sources worldwide. Therefore, this study aimed at assessing the occurrence of Blastocystis in water sources across the world from 2005 to 2022, noting the method of detection and the distribution of the subtypes from various water sources. A literature search was performed on internet-based databases including Google search, PubMed, Scopus, and Web of Science. Upon application of the criteria for inclusion, 25 articles revealing the occurrence of Blastocystis in water sources in 15 countries were included in the review. Blastocystis occurrence varies across water sources ranging from 0% in a drinking water source in Venezuela to 100% in rivers; well water, stored water, and fishpond in Nepal and Malaysia; and fountain water, irrigation water, and rainwater in Italy, Spain, and Thailand. The occurrence of the parasite was significantly associated with the coliform count, temperature, conductivity, dissolved oxygen, turbidity, total dissolved solids, and chemical oxygen demand. A total of 11 Blastocystis subtypes were identified in water sources worldwide, namely, ST1-ST8, ST10, ST23, and ST26 in which ST1 and ST3 were the most prevalent subtypes. Considering the importance of Blastocystis as a waterborne parasite, the subtype distribution and morphological distinction in water sources need to be carried out using molecular and electron microscopic techniques. Existing studies have covered only about 10% of the world's countries.
The primary aim of this study is to develop an economical, stable, and effective heterogeneous catalyst for wastewater remediation via the Fenton oxidation process. For this purpose, Fe3O4-montmorillonite alginate (FeMA) composite beads were synthesized by entrapping Fe3O4-montmorillonite in calcium alginate beads. The performance of the catalysts was evaluated via the Fenton degradation of ofloxacin (OFL), an antibiotic that is frequently detected in water bodies. The physiochemical properties of the FeMA composite beads were characterized using X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope/energy dispersive X-ray (FESEM/EDX), Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). FeMA composite beads were found to have a higher surface area, higher porosity, and better thermal stability compared to pristine alginate beads. The composite beads were subsequently used for Fenton degradation of ofloxacin (OFL) in an aqueous solution. The effects of Fe3O4-montmorillonite loading on alginate, FeMA composite beads dosage, initial solution pH, initial OFL concentration, different oxidants, H2O2 dosage, reaction temperature, and inorganic salts on Fenton degradation of OFL in aqueous solution was investigated. The results revealed that the percentage of OFL degradation reached about 80 % under optimized conditions, while the total organic carbon (TOC) removal reached about 53 %. The entrapment of Fe3O4-montmorillonite in alginate beads results in less iron ions leaching compared to previous observation, and the efficiency remains constant over the five cycles investigated. The kinetics of the Fenton degradation process are best fitted to the pseudo-first-order kinetic model. It is therefore believed that FeMA composite beads can be a promising material for wastewater remediation via the Fenton oxidation process.