MyMedR

Displaying publications 281 - 300 of 2919 in total

Abstract:

Sort:

Fulltext Effect of annealing temperature on the anatase and rutile TiO2 nanotubes formation

Lockman, Zainovia, Chin, Hui Kit, Sreekantan, Srimala

Journal of Nuclear and Related Technologies, 2009;2009(1):57-64.
MyJurnal

Herein, we report on the optimum condition for TiO2, titania nanotubes formation and the effect of annealing on the formation of anatase and rutile titania. Anodic oxidation was carried out in two electrodes bath consisting of 5wt% NH4F ions. The anode was a 0.1mm thick Ti foil and the cathode was Pt electrode. Anodisation was conducted at 20V. The anodised foils were subjected to morphological and structural characterizations. As-anodised foil was found to be amorphous or weakly crystalline. When the oxide was heat treated, x-ray diffraction analysis revealed the presence of (101) anatase at annealing temperature from 400-500°C. This indicates that the transformation occurs at this range of temperatures. Raman spectroscopy analysis showed the diminishing of anatase peaks for samples annealed at 500°C. At above 600°C, x-ray diffraction pattern shows a peak belonging to the rutile peak. Transformation from anatase to rutile is thought to occur at about 500°C with a more complete transformation at higher temperature. Annealing at higher than 600°C induces thickening of the nanotubes wall and at above 700°C, the nanotubes structure has completely disappeared.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Consequences of rising humidity level on circulatory responses during prolonged intense exercise

Ahmad Munir Che Muhamed, Thompson, Martin William

Movement Health & Exercise, 2012;1(1):11-23.
MyJurnal

The combined metabolic and thermoregulatory demands experienced during exercise in the heat impose an exceptional stress on the circulatory system. To date, much of what is known about circulatory stress during exercise in the heat has focused on primarily dry environment (~ 40% rh)
with limited studies carried in higher humidity (> 60% rh) conditions. This study was designed to investigate the influence of humid condition on circulatory responses during prolonged intense running exercise among elite runners. On separate days, 11 male elite runners ran for 60 minutes at
an intensity of 70% max across three different humidity levels of HH (71% rh), NH (43% rh) and LH (26.2% rh) with the ambient temperature set at 300C. Thermal stress was found to increase during exercise in the HH condition as both Tre and Tsk steadily rise across time. Circulatory stress markedly increased during exercise in higher humidity levels. Heart rate was significantly higher in the HH condition with its level increasing to 92% of HRmax. The upwards drift in HR was significantly higher in HH within the last ten minutes of exercise. Contrary, stroke volume recorded a
steady decline during exercise with a significantly lower SV in the HH as compared with the NH and LH. Results implicate rising humidity level will impose greater circulatory stress during prolonged intense exercise. The consequence from this circulatory stress will result in limited ability for an athlete to sustain his exercise capacity when HR reaches maximal level.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Heat transfer enhancement in free convection flow of CNTs Maxwell nanofluids with four different types of molecular liquids

Aman S, Khan I, Ismail Z, Salleh MZ, Al-Mdallal QM

Sci Rep, 2017 05 26;7(1):2445.
PMID: 28550289 DOI: 10.1038/s41598-017-01358-3

This article investigates heat transfer enhancement in free convection flow of Maxwell nanofluids with carbon nanotubes (CNTs) over a vertically static plate with constant wall temperature. Two kinds of CNTs i.e. single walls carbon nanotubes (SWCNTs) and multiple walls carbon nanotubes (MWCNTs) are suspended in four different types of base liquids (Kerosene oil, Engine oil, water and ethylene glycol). Kerosene oil-based nanofluids are given a special consideration due to their higher thermal conductivities, unique properties and applications. The problem is modelled in terms of PDE's with initial and boundary conditions. Some relevant non-dimensional variables are inserted in order to transmute the governing problem into dimensionless form. The resulting problem is solved via Laplace transform technique and exact solutions for velocity, shear stress and temperature are acquired. These solutions are significantly controlled by the variations of parameters including the relaxation time, Prandtl number, Grashof number and nanoparticles volume fraction. Velocity and temperature increases with elevation in Grashof number while Shear stress minimizes with increasing Maxwell parameter. A comparison between SWCNTs and MWCNTs in each case is made. Moreover, a graph showing the comparison amongst four different types of nanofluids for both CNTs is also plotted.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Overview on thorium in research reactors

Abdul Hannan Damahuri, Hassan Mohamed, Abdul Aziz Mohamed

Journal of Nuclear and Related Technologies, 2017;14(2):11-17.
MyJurnal

Thorium is a fertile material that can undergo transmutation for it to become a fissile material,
uranium-233. The fissile material can go through a fission process in order to generate heat energy
and eventually electricity. Most nuclear reactors use uranium as their fission source. The use of
thorium as nuclear fuel has been only investigated for few types of reactors such as a high, temperature
gas reactor (HTGR), fast breeder reactor, light water reactor (LWR) and heavy water reactor
(HWR). For research reactors specifically, there are limited academic publications related to the
la,test u.se of thorium. Hence, the main, interest, of this work is to compile and review the latest
academic publications related to the active use of thorium, for research reactors in particular. The
reviewed studies have been, divided into two categories which are experimented and simulation projects.
The experimental projects are a,bold the ongoing thorium fuel tests that have been carried out. in an
actual, research reactor. On the hand, the simulation work: is related to the computational analysis
performed in predicting the neutronic behaviour of thorium based fuel in research reactors. The
experimented study of thorium is currently active for the KAMINI research reactor. Additionally, most,
simulation works focus on finding criticality and neutron spectra.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Glass-ceramic based on soda lime silica glass system

Radzali, O., Zaleha, M., Nor Fatiha, I., Ooi, C.H.

Malaysian Journal of Microscopy, 2015;11(1):85-88.
MyJurnal

Glass-ceramics are a group of materials that takes advantage of the various glass-forming methods before they are subsequently heat-treated in a controlled manner to effect nucleation and crystallization to produce crystalline materials. The production of glassceramic materials is to overcome the low mechanical strength in pure glassy materials. In this work, a study on the crystallisation of a soda-lime-silica glass was undertaken to ascertain how the processing parameters affect the crystallization of such glasses, viz. either via a single or two-step heat-treatment procedure, as well as the effect of soaking duration at the heat-treatment temperature. A soda-lime-silica glass system was chosen because the raw materials for producing such glasses are readily available and can be considered to be the cheapest. The glass produced was examined by thermal analysis to determine the nucleation and crystallization temperatures before they were heat-treated using a single-step and a two-stage heat-treatment procedures. The resultant glassceramics produced were characterized using x-ray diffraction as well as by scanning electron microscopy. The results thus obtained showed that a two-stage heat-treatment procedure is more successful in producing a well-crystallized glass-ceramic product.

Matched MeSH terms: Hot Temperature; Temperature
Synthesis, Structural, Thermal, and Electronic Properties of Palmierite-Related Double Molybdate α-Cs2Pb(MoO4)2

Solodovnikov SF, Atuchin VV, Solodovnikova ZA, Khyzhun OY, Danylenko MI, Pishchur DP, et al.

Inorg Chem, 2017 Mar 20;56(6):3276-3286.
PMID: 28266857 DOI: 10.1021/acs.inorgchem.6b02653

Cs2Pb(MoO4)2crystals were prepared by crystallization from their own melt, and the crystal structure has been studied in detail. At 296 K, the molybdate crystallizes in the low-temperature α-form and has a monoclinic palmierite-related superstructure (space group C2/m, a = 2.13755(13) nm, b = 1.23123(8) nm, c = 1.68024(10) nm, β = 115.037(2)°, Z = 16) possessing the largest unit cell volume, 4.0066(4) nm3, among lead-containing palmierites. The compound undergoes a distortive phase transition at 635 K and incongruently melts at 943 K. The electronic structure of α-Cs2Pb(MoO4)2was explored by using X-ray emission spectroscopy (XES) and X-ray photoelectron spectroscopy methods. For α-Cs2Pb(MoO4)2, the photoelectron core-level and valence-band spectra and the XES band representing the energy distribution of Mo 4d and O 2p states were recorded. Our results allow one to conclude that the Mo 4d and O 2p states contribute mainly to the central part and at the top of the valence band, respectively, with also significant contributions throughout the whole valence-band region of the molybdate under consideration.

Matched MeSH terms: Cold Temperature; Temperature
Short-term heat acclimation prior to a multi-day desert ultra-marathon improves physiological and psychological responses without compromising immune status

Willmott AGB, Hayes M, Waldock KAM, Relf RL, Watkins ER, James CA, et al.

J Sports Sci, 2017 Nov;35(22):2249-2256.
PMID: 27935427 DOI: 10.1080/02640414.2016.1265142

Multistage, ultra-endurance events in hot, humid conditions necessitate thermal adaptation, often achieved through short term heat acclimation (STHA), to improve performance by reducing thermoregulatory strain and perceptions of heat stress. This study investigated the physiological, perceptual and immunological responses to STHA prior to the Marathon des Sables. Eight athletes (age 42 ± 4 years and body mass 81.9 ± 15.0 kg) completed 4 days of controlled hyperthermia STHA (60 min·day‒1, 45°C and 30% relative humidity). Pre, during and post sessions, physiological and perceptual measures were recorded. Immunological measures were recorded pre-post sessions 1 and 4. STHA improved thermal comfort (P = 0.02), sensation (P = 0.03) and perceived exertion (P = 0.04). A dissociated relationship between perceptual fatigue and Tre was evident after STHA, with reductions in perceived Physical (P = 0.04) and General (P = 0.04) fatigue. Exercising Tre and HR did not change (P > 0.05) however, sweat rate increased 14% (P = 0.02). No changes were found in white blood cell counts or content (P > 0.05). Four days of STHA facilitates effective perceptual adaptations, without compromising immune status prior to an ultra-endurance race in heat stress. A greater physiological strain is required to confer optimal physiological adaptations.

Matched MeSH terms: Hot Temperature*
Fulltext Palm Kernel Shell Activated Carbon as an Inorganic Framework for Shape-Stabilized Phase Change Material

Nicholas AF, Hussein MZ, Zainal Z, Khadiran T

Nanomaterials (Basel), 2018 Sep 05;8(9).
PMID: 30189654 DOI: 10.3390/nano8090689

The preparation of activated carbon using palm kernel shells as the precursor (PKSAC) was successfully accomplished after the parametric optimization of the carbonization temperature, carbonization holding time, and the ratio of the activator (H₃PO₄) to the precursor. Optimization at 500 °C for 2 h of carbonization with 20% H₃PO₄ resulted in the highest surface area of the activated carbon (C20) of 1169 m² g-1 and, with an average pore size of 27 Å. Subsequently, the preparation of shape-stabilized phase change material (SSPCM-C20) was done by the encapsulation of n-octadecane into the pores of the PKSAC, C20. The field emission scanning electron microscope images and the nitrogen gas adsorption-desorption isotherms show that n-octadecane was successfully encapsulated into the pores of C20. The resulting SSPCM-C20 nano-composite shows good thermal reliability which is chemically and thermally stable and can stand up to 500 melting and freezing cycles. This research work provided a new strategy for the preparation of SSPCM material for thermal energy storage application generated from oil palm waste.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Experimental data on the air-sea energy fluxes at the tropical coastal ocean in the southern South China Sea

Yusup Y, Kayode JS, Alkarkhi AFM

Data Brief, 2018 Aug;19:1477-1481.
PMID: 30229020 DOI: 10.1016/j.dib.2018.06.020

Air-sea flux exchanges influence the climate condition and the global carbon-moisture cycle. It is imperative to understand the fundamentals of the natural systems at the tropical coastal ocean and how the transformation takes place over the time. Hence, latent and sensible heat fluxes, microclimate variables, and surface water temperature data were collected using eddy covariance instruments mounted on a platform at a tropical coastal ocean station from November 2015 to October 2017. The research data is to gain the needful knowledge of the energy exchanges in the tropical climatic environment to further improve predictive algorithms or models. Therefore, it is intended that this data report will offer appropriate information for the Monsoonal, and diurnal patterns of latent (LE) and sensible (H) heats and hence, establish the relationship between microclimate variables on the energy fluxes at the peninsular Malaysian tropical coastal ocean.

Matched MeSH terms: Hot Temperature; Temperature
Natural Variation in Freezing Tolerance and Cold Acclimation Response in Arabidopsis thaliana and Related Species

Zuther E, Lee YP, Erban A, Kopka J, Hincha DK

Adv Exp Med Biol, 2018 10 6;1081:81-98.
PMID: 30288705 DOI: 10.1007/978-981-13-1244-1_5

During low-temperature exposure, temperate plant species increase their freezing tolerance in a process termed cold acclimation. The molecular mechanisms involved in cold acclimation have been mostly investigated in Arabidopsis thaliana. In addition, other Brassicaceae species related to A. thaliana have been employed in recent years to study plant stress responses on a phylogenetically broader basis and in some cases with extremophile species with a much higher stress tolerance. In this paper, we briefly summarize cold acclimation responses in A. thaliana and current knowledge about cold acclimation in A. thaliana relatives with special emphasis on Eutrema salsugineum and two closely related Thellungiella species. We then present a transcriptomic and metabolomic analysis of cold acclimation in five A. thaliana and two E. salsugineum accessions that differ widely in their freezing tolerance. Differences in the cold responses of the two species are discussed.

Matched MeSH terms: Cold Temperature; Temperature
Fulltext The alternative approach of low temperature-long time cooking on bovine semitendinosus meat quality

Ismail I, Hwang YH, Bakhsh A, Joo ST

Asian-Australas J Anim Sci, 2019 Feb;32(2):282-289.
PMID: 30208691 DOI: 10.5713/ajas.18.0347

OBJECTIVE: This study aimed to elucidate whether innovative sous vide treatment has a significant influence on the beef semitendinosus muscle as compared to common sous vide treatment and traditional cooking.
METHODS: The innovative sous vide treatments were cooked at 45°C and 65°C for 6 h (SV45-65), common sous vide treatment at 45°C and 65°C for 3 h (SV45 and SV65) and traditional cooking at 75°C for 30 min (CON75). Water loss and cooking loss, as well as the physical properties (color and shear force) and chemical properties (protein and collagen solubility) of the treated meat, were investigated.
RESULTS: The results obtained indicated that the innovative sous vide with double thermal treatment (SV45-65) and cooked with air presence (CON75) resulted to lower a* and higher b* values, respectively. The water loss and cooking loss increased when temperature increased from 45°C to 65°C, and lower water loss was recorded in SV45 and CON75. These samples presented higher water content and revealed strong correlation to protein solubility. Warner-Bratzler shear force (SF) analysis showed the marked interaction between cooking temperature and time. Sample cooked at a high temperature (CON75) and a long period (SV45-65) showed a significantly lower value of SF than sample SV65 (p<0.05). Interestingly, there was no difference in SF values between SV45-65 and CON75.
CONCLUSION: The innovative sous vide treatment with double thermal effect appears an attractive cooking method as compared to common sous vide and traditional cooking method, as it has a potential for improving tenderness values of cooked beef semitendinosus muscle.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Mass spectrometry dataset for LC-MS metabolomics analysis of Garcinia mangostana L. seed development

Mazlan O, Aizat WM, Baharum SN, Azizan KA, Noor NM

Data Brief, 2018 Dec;21:548-551.
PMID: 30370325 DOI: 10.1016/j.dib.2018.10.025

Garcinia mangostana L. (mangosteen) seed is recalcitrant, prone to low temperature and drying which limit its long-term storage. Therefore, it is imperative to understand the metabolic changes throughout its development, to shed some light into the recalcitrant nature of this seed. We performed metabolomics analysis on mangosteen seed at different stages of development; six, eight, ten, twelve and fourteen weeks after anthesis. Seed samples were subjected to methanol extraction prior analysis using liquid chromatography - mass spectrometry (LC-MS). The MS data acquired were analyzed using ProfileAnalysis (version 2.1). This data article refers to the article entitled "Metabolomics analysis of developing Garcinia mangostana seed reveals modulated levels of sugars, organic acids and phenylpropanoid compounds" (Mazlan et al., 2018) [1].

Matched MeSH terms: Cold Temperature; Temperature
Fulltext Elucidating mesomorphic and electrical properties of conjugated acetylide-imine as electrochemically deposited electron transporting materials in organic conductive film

Wan M. Khairul, Foong, Y.D., Lee, O.J., Lim, S.K.J., Daud, A.I., Rahamathullah, R., et al.

ASM Science Journal, 2018;11(101):124-135.
MyJurnal

A new class of liquid crystalline acetylide-imine system was successfully synthesized, characterized
and deposited on indium tin oxide (ITO) coated substrate via electrochemical deposition
method for potential organic film application. The relationship between liquid crystal
molecular structure, phase transition temperature and electrical performance was evaluated.
The mesomorphic properties were identified via polarized optic microscopy (POM) which displayed
fan-shaped texture of smectic A phase and their corresponding transition enthalpies
are in concurrence with DSC and TGA studies. The findings from the conductivity analysis
revealed that the fabricated film exhibits good electrical performance where it displayed
linear current-voltage relationship of I-V curve. Therefore, this proposed type of molecular
framework has given an ideal indication to act as transporting material for application in
optoelectronic devices.

Matched MeSH terms: Temperature; Transition Temperature
Wettability of 3 different artificial saliva substitutes on heat-polymerized acrylic resin

Jaiswal N, Patil PG, Gangurde A, Parkhedkar RD

J Prosthet Dent, 2019 Mar;121(3):517-522.
PMID: 30391058 DOI: 10.1016/j.prosdent.2018.03.037

STATEMENT OF PROBLEM: The prosthodontic problems faced by a patient with xerostomia are of great concern. To aid in retention, artificial saliva substitutes should exhibit good wettability on the denture base.
PURPOSE: The purpose of this in vitro study was to evaluate the wettability of 3 different artificial saliva substitutes on heat-polymerized acrylic resin and to compare these properties with natural saliva and distilled water.
MATERIAL AND METHODS: A total of 150 heat-polymerized acrylic resin specimens were prepared with 25×15×2 mm dimensions. The specimens were divided into 5 groups (n=30): human saliva, distilled water, Aqwet, Mouth Kote, and Stoppers 4. The advancing and receding contact angle values were measured by using a goniometer, and the contact angle hysteresis and equilibrium angle were calculated. One-way ANOVA and the Bonferroni multiple comparisons test were performed to determine the difference between contact angle values among the groups (α=.05).
RESULTS: The means of the 5 groups differed significantly (P

Matched MeSH terms: Hot Temperature*
Fulltext Assessments of Secondary Reinforcement of Epoxy Matrix-Glass Fibre Composite Laminates through Nanosilica (SiO₂)

Lazar PJL, Sengottuvelu R, Natarajan E

Materials (Basel), 2018 Nov 05;11(11).
PMID: 30400592 DOI: 10.3390/ma11112186

The principal objective of this research work was to investigate the results of impregnating epoxy matrix-glass fibre composite laminates with nanosilica as secondary reinforcement. 0.5, 0.75, 1 and 3 wt% nanosilica was used and thereafter properties of composites were assessed through tensile, three point bending, quasi static indentation tests and dynamic mechanical analysis. Scanning electron microscope examinations were done on fracture surfaces and failure modes were analyzed. The internal failures of the composite due to quasi-static indentation were evaluated through C-Scan. Among samples of different weight fractions, 0.75 wt% nanosilica reinforced composite laminates exhibited substantial increase of 42% in tensile strength and 39.46% in flexural strength. The reduction in glass transition temperature (Tg), increase in storage modulus (E'), loss modulus (E″) and damping factor (tan δ) were also observed. Quasi-static indentation assessments revealed that energy absorption property was enhanced significantly by 53.97%. Hence nanosilica up to 0.75 wt% can be used as a potential candidate for secondary reinforcement in epoxy composite laminates.

Matched MeSH terms: Temperature; Transition Temperature
Fulltext The Influence of Post Weld Heat Treatment Precipitation on Duplex Stainless Steels Weld Overlay towards Pitting Corrosion

Sim BM, Hong TS, Hanim MA, Tchan EN, Talari MK

Materials (Basel), 2019 Oct 10;12(20).
PMID: 31658593 DOI: 10.3390/ma12203285

Duplex stainless steels (DSSs) are complex materials and they have been widely used in the marine environment and gas industries, primarily offering a better resistance of pitting corrosion and good mechanical properties. In the present work, the effects of heat treatment on duplex stainless steel (DSS) weld overlay samples that were heat treated at three different temperatures, namely 350 °C, 650 °C, and 1050 °C, and followed by air cooling and water quenching were studied. Stress relief temperature at 650 °C had induced sigma phase precipitation in between delta ferrite and austenite (δ/γ) grain boundaries, resulting in the loss of corrosion resistance in the weld metal. Interestingly, post weld heat treatment (PWHT) test samples that were reheated to solution annealing temperature had shown no weight loss. The ferrite count determination in the region of weld metal overlay increased at hydrogen relief and decreased at stress relief temperatures due to slow cooling, which is more favorable to austenite formation. The amount of ferrite in the weld metals was significantly reduced with the increment of solution anneal temperature to 1050 °C because of sufficient time for the formation of austenite and giving optimum equilibrium fraction in the welds.

Matched MeSH terms: Hot Temperature; Temperature
Fulltext Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties

Bayat M, Alarifi IM, Khalili AA, El-Bagory TMAA, Nguyen HM, Asadi A

Sci Rep, 2019 Oct 25;9(1):15317.
PMID: 31653877 DOI: 10.1038/s41598-019-51450-z

A thermo-elastic contact problem of functionally graded materials (FGMs) rotating brake disk with different pure brake pad areas under temperature dependent material properties is solved by Finite Element Method (FEM). The properties of brake disk change gradually from metal to ceramic by power-law distribution along the radial direction from the inner to the outer surface. Areas of the pure pad are changing while the vertical force is constant. The ratio of brake pad thickness to FGMs brake disk thickness is assumed 0.66. Two sources of thermal loads are considered: (1) Heat generation between the pad and brake disk due to contact friction, and (2) External thermal load due to a constant temperature at inner and outer surfaces. Mechanical responses of FGMs disk are compared with several pad contact areas. The results for temperature-dependent and temperature-independent material properties are investigated and presented. The results show that the absolute value of the shear stress in temperature-dependent material can be greater than that for temperature-independent material. The radial stress for some specific grading index (n = 1.5) is compressive near the inner surface for double contact while it is tensile for a single contact. It is concluded that the radial strain for some specific value of grading index (n = 1) is lower than other FGMs and pure double side contact brake disks.

Matched MeSH terms: Hot Temperature; Temperature
Properties of ENR-50 based electrolyte system

Zainal N, Mohamed N, Idris R

Sains Malaysiana, 2013;42:481-485.

In this work, epoxidized natural rubber 50 (ENR-50) has been used as a host polymer for the preparation of electrolyte system. Attenuated total reflection-fourier transform infrared spectroscopic analyses showed the presence of lithium saltENR interactions. The glass transition temperature displayed an increasing trend with the increase in salt concentration indicating that the ionic conductivity was not influenced by segmental motion of the ENR-50 chains. The increase in
glass transition temperature with the addition of salt was due to the formation of transient cross-linking between ENR-50 chains via the coordinated interaction between ENR-50 chains and salt. The highest room temperature ionic conductivity obtained was in the order of 10-5 S cm-1 for the film containing 50 wt% of lithium salt. The ionic conductivity of this electrolyte system increased with increasing temperature and obeyed the Vogel-Tamman-Fulcher behavior. The increase in ionic conductivity of the electrolyte system with salt concentration could also be correlated to the charge carriers concentration and/or migration rate of charge carriers.

Matched MeSH terms: Temperature; Transition Temperature
Nitridation of Al-Mg-Si alloys through dynamic heating

Roslinda Shamsudin, Abdul Razak Daud, Muhammad Azmi Abdul Hamid, Saiful Rizam Shamsudin

Sains Malaysiana, 2007;36:195-200.

Nitridation behaviour of Al-Mg-Si alloys was studied as a function of temperature by means of thermogravimetry method. A reactive gas, N2-4%H2 at a rate of 10 ml/min was purged into the thermogravimetry analyser chamber. The Al alloys were heated from 25oC to 625oC at the heating rate of 15oC/min and then reduced to 3oC/min until it reached 1500oC. It was found that by varying the amount of Mg and Si in Al-Mg-Si alloys significantly influenced the growth of the composites. A differential thermogravimetric curve shows the Mg containing alloys experienced many steps of chemical reactions. This indicates that besides AlN presence as a major phase, other compounds also exist in the final product. The X-ray diffraction results confirmed the existence of oxide phases such as a-Al2O3, MgAl2O4 and MgO in addition to residual Si and Al metal. The presence of oxide compounds is believed to be due to the reaction between the alloying elements and residual oxygen gas left in the reaction atmosphere. It was also found that Si could play a role in promoting the weight gain of the composite produced. The heating rate has also a profound effect on the weight gain, whereby higher heating rate resulted in low yielded of AlN during the nitridation reaction of the Al-Mg-Si alloys.

Matched MeSH terms: Hot Temperature; Temperature
MHD mixed convection peristaltic flow with variable viscosity and thermal conductivity

Hayat T, Abbasi F, Ahmad B, Alsaedi A

Sains Malaysiana, 2014;43:1583-1590.

This article concerns with a mixed convection peristaltic flow of an electrically conducting fluid in an inclined asymmetric channel. Analysis has been carried out in the presence of Joule heating. The fluid viscosity and thermal conductivity are assumed to vary as a linear function of temperature. A nonlinear coupled governing system is computed. Numerical results were presented for the velocity, pressure gradient, temperature and streamlines. Heat transfer rate at the wall is computed and analyzed. Graphs reflecting the contributions of embedded parameters were discussed.

Matched MeSH terms: Hot Temperature; Temperature

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links