MyMedR

Displaying publications 3681 - 3700 of 3989 in total

Abstract:

Sort:

Fulltext Intestinal protozoan infections in Malaysia

Lai KP

Southeast Asian J. Trop. Med. Public Health, 1992 Dec;23(4):578-86.
PMID: 1298065

Intestinal protozoa are found in all communities in Malaysia and among all ethnic groups. Prevalence of intestinal protozoa is not affected by ethnicity but by living conditions. Communities with both basic amenities of safe water supply and proper toilets have lower prevalence than those with one or none of the amenity. Cryptosporidium is an important intestinal protozoon in Malaysia and should be included in future field and laboratory studies and also in laboratory diagnosis for pathogens. Much interest will be centered on Blastocystis hominis in future studies in view that it may be a cause of diarrhea.

Matched MeSH terms: Water Supply
Report of a freshwater hydrobiid snail from Pahang, Malaysia: a possible host for schistosomes infecting man

Greer GJ, Lim HK, Ow-Yang CK

Southeast Asian J. Trop. Med. Public Health, 1980 Mar;11(1):146-7.
PMID: 7403949
Matched MeSH terms: Fresh Water
Infant mortality decline in Malaysia, 1946-1975: the roles of changes in variables and changes in the structure of relationships

DaVanzo J, Habicht JP

Demography, 1986 May;23(2):143-60.
PMID: 3709892

This analysis has identified several factors contributing to the dramatic decline in infant mortality since World War II in Malaysia, as well as one factor that prevented the infant mortality rate from declining even more rapidly. Our main findings are the following: On average, mothers' education more than doubled over the study period, contributing to the decline in their infants' mortality. In addition, the beneficial effect of mothers' education on infant survival appears to have become stronger over the study period. Hence, further advances in education should lead to further improvements in infants' survival prospects. Another analysis of these data (Peterson et al. 1985) found that education is somewhat more influential in affecting child mortality in low-mortality, high-income areas than in the opposite type of areas. Therefore, socioeconomic development may have complemented, instead of substituted for, the the beneficial effect of mothers' education in promoting infant and child survival in Malaysia. Improvements in water and sanitation also contributed to the infant mortality decline, especially for babies who did not breastfeed. However, unlike education, these influences have become less important over time, especially for babies who are not breastfed. Hence, further improvements in water and sanitation, a goal of Malaysia's Rural Environmental Sanitation Programme, may have smaller relative effects on infant mortality than did previous improvements. Targeting such improvements on areas where women breastfeed little or not at all, however, will increase their effectiveness in promoting infant survival. The substantial reductions in breastfeeding that have taken place since World War II have kept the infant mortality rate in Malaysia from declining as rapidly as it would have otherwise. We estimate that, in our sample, the detrimental effects on infant survival of the decline in breastfeeding have more than offset the beneficial effects of improvements in water and sanitation. Unlike some other researchers (e.g., Palloni 1981), we find that changes in fertility levels and in the timing and spacing of births have had negligible effect in explaining the decline in infant mortality within the samples we have considered. We have excluded births to older women from our analysis, however; this exclusion may have led to an understatement of the influence of changes in the age pattern of childbearing.(ABSTRACT TRUNCATED AT 400 WORDS)

Matched MeSH terms: Water Supply
Environmental engineering education for developing countries: framework for the future

Ujang Z, Henze M, Curtis T, Schertenleib R, Beal LL

Water Sci Technol, 2004;49(8):1-10.
PMID: 15193088

This paper presents the existing philosophy, approach, criteria and delivery of environmental engineering education (E3) for developing countries. In general, environmental engineering is being taught in almost all major universities in developing countries, mostly under civil engineering degree programmes. There is an urgent need to address specific inputs that are particularly important for developing countries with respect to the reality of urbanisation and industrialisation. The main component of E3 in the near future will remain on basic sanitation in most developing countries, with special emphasis on the consumer-demand approach. In order to substantially overcome environmental problems in developing countries, E3 should include integrated urban water management, sustainable sanitation, appropriate technology, cleaner production, wastewater minimisation and financial framework.

Matched MeSH terms: Water Supply
Physico-chemical removal of iron from semi-aerobic landfill leachate by limestone filter

Aziz HA, Yusoff MS, Adlan MN, Adnan NH, Alias S

Waste Manag, 2004;24(4):353-8.
PMID: 15081062

Limestone has been proven effective in removing metals from water and wastewater. A literature review indicated that limestone is capable of removing heavy metals such as Cu, Zn, Cd, Pb, Ni, Cr, Fe and Mn are through a batch process or by filtration technique. The removal capability is reported at up to 90%. However, to date most of the studies have been focused on synthetic wastewater. The present study attempts to investigate the suitability of limestone to attenuate total iron (Fe) from semi aerobic leachate at Pulau Burung Landfill Site in Penang, Malaysia. Iron was found in significant quantities at the landfill site. The study also aims to establish the Fe isotherm and breakthrough time of the proposed limestone filter for post-treatment to the migrating landfill leachate before its release to the environment. The Fe isotherms were established using a batch equilibrium test, while the breakthrough characteristics were determined using continuous flow permeating through a limestone column. The latter was used in order to simulate the continuous flow of leachate that would occur in the proposed limestone filter. The limestone media used in the experiment contain more than 90% CaCO3 with particle sizes ranging from 2 to 4 mm. Four filter columns (each 150 mm in diameter and 1000 mm depth) were installed at the landfill site. Metal loadings were kept below 0.5 kg /m3 day and the experiment was run continuously for 30 days. Initial results indicated that 90% of Fe can be removed from the leachate based on retention time of 57.8 min and surface loading of 12.2 m3/m2 day. For the batch study on the Fe isotherm, the results indicated that limestone is potentially useful as an alternative leachate treatment system at a relatively low cost.

Matched MeSH terms: Water
A field trial to control Trichobilharzia brevis by dispersing eggs of Echinostoma audyi

Lie Kian Joe, Owyang CK

Southeast Asian J. Trop. Med. Public Health, 1973 Jun;4(2):208-17.
PMID: 4749072
Matched MeSH terms: Water
Fulltext Dengue prevention practices and their associated factors among wet market in Hilir Perak District, Malaysia

Nur Intan Kartiniewatie Kamaruddin, Salmiah Md Said, Hayati Kadir @ Shahar, Lim Poh Ying

Malaysian Journal of Medicine and Health Sciences, 2019;15(104):46-46.
MyJurnal

Introduction: Wet markets are predisposed to Aedes breeding due to nature of daily activities that involve frequent water storage and usage of water collecting containers. Large numbers of visitors patronising wet markets could cause rapid spread of dengue infection. This study aimed to determine the level of dengue prevention practices among wet market traders in Hilir Perak District and their associated socioecological factors. Methods: A cross sectional study using stratified sampling method was conducted where 246 wet market traders were interviewed to collect data on dengue prevention practices (prevention of Aedes mosquitoes breeding and prevention of mosquito bites), and so-cioecological factors. Chi square test and logistic regression modelling were performed to identify socioecological factors associated with dengue prevention practices. Results: Response rate for this study was 88.9%. Majority of the respondents were male, above 40 years old, had secondary education and above, had monthly income of above MYR2000, were owner of the shop lots, was or had ever married and sold fish, vegetable or groceries products. Most of the respondents had high level of dengue prevention practices (78%). Those who were owner of shop lots, had high perceived susceptibility, high family support, and high perceived dengue prevention and control laws and reg-ulations were predicted to have high level of dengue prevention practices. Conclusion: Level of dengue prevention practices is determined not only by individual factors, but also other factors from relationship to societal level which must also be considered in planning or evaluating current dengue control programmes.

Matched MeSH terms: Water
Fulltext Physicochemical Characterization of Bilayer Hybrid Nanocellulose-Collagen as a Potential Wound Dressing

Ooi KS, Haszman S, Wong YN, Soidin E, Hesham N, Mior MAA, et al.

Materials (Basel), 2020 Sep 30;13(19).
PMID: 33007893 DOI: 10.3390/ma13194352

The eminent aim for advance wound management is to provide a great impact on the quality of life. Therefore, an excellent strategy for an ideal wound dressing is being developed that eliminates certain drawbacks while promoting tissue regeneration for the prevention of bacterial invasion. The aim of this study is to develop a bilayer hybrid biomatrix of natural origin for wound dressing. The bilayer hybrid bioscaffold was fabricated by the combination of ovine tendon collagen type I and palm tree-based nanocellulose. The fabricated biomatrix was then post-cross-linked with 0.1% (w/v) genipin (GNP). The physical characteristics were evaluated based on the microstructure, pore size, porosity, and water uptake capacity followed by degradation behaviour and mechanical strength. Chemical analysis was performed using energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectrophotometry (FTIR), and X-ray diffraction (XRD). The results demonstrated a uniform interconnected porous structure with optimal pore size ranging between 90 and 140 μm, acceptable porosity (>70%), and highwater uptake capacity (>1500%). The biodegradation rate of the fabricated biomatrix was extended to 22 days. Further analysis with EDX identified the main elements of the bioscaffold, which contains carbon (C) 50.28%, nitrogen (N) 18.78%, and oxygen (O) 30.94% based on the atomic percentage. FTIR reported the functional groups of collagen type I (amide A: 3302 cm-1, amide B: 2926 cm-1, amide I: 1631 cm-1, amide II: 1547 cm-1, and amide III: 1237 cm-1) and nanocellulose (pyranose ring), thus confirming the presence of collagen and nanocellulose in the bilayer hybrid scaffold. The XRD demonstrated a smooth wavy wavelength that is consistent with the amorphous material and less crystallinity. The combination of nanocellulose with collagen demonstrated a positive effect with an increase of Young's modulus. In conclusion, the fabricated bilayer hybrid bioscaffold demonstrated optimum physicochemical and mechanical properties that are suitable for skin wound dressing.

Matched MeSH terms: Water
Modelling the effect of temperature and water activity on the growth rate of Aspergillus flavus and aflatoxin production in peanut meal extract agar

Norlia M, Jinap S, Nor-Khaizura MAR, Radu S, John JM, Rahman MAH, et al.

Int J Food Microbiol, 2020 Dec 16;335:108836.
PMID: 33065380 DOI: 10.1016/j.ijfoodmicro.2020.108836

Aspergillus flavus is the predominant species that produce aflatoxins in stored peanuts under favourable conditions. This study aimed to describe the growth and aflatoxin production by two A. flavus strains isolated from imported raw peanuts and to model the effects of temperature and aw on their colony growth rate as a function of temperature and aw in Peanut Meal Extract Agar (PMEA). A full factorial design with seven aw levels (0.85-0.98 aw) and five temperature levels (20-40 °C) was used to investigate the growth and aflatoxin production. Colony diameter was measured daily for 28 days while AFB1 and total aflatoxin were determined on day 3, 7, 14, and 21. The maximum colony growth rate, μmax (mm/day) was estimated by using the primary model of Baranyi, and the μmax was then fitted to the secondary model; second-order polynomial and linear Arrhenius-Davey to describe the colony growth rate as a function of temperature and aw. The results indicated that both strains failed to grow at temperature of 20 °C with aw <0.94 and aw of 0.85 for all temperatures except 30 °C. The highest growth rate was observed at 30 °C, with 0.98 aw for both strains. The analysis of variance showed a significant effect of strain, temperature, and aw on the fungal growth and aflatoxin production (p

Matched MeSH terms: Water
Fulltext Crosslinked Carboxymethyl Sago Starch/Citric Acid Hydrogel for Sorption of Pb2+, Cu2+, Ni2+ and Zn2+ from Aqueous Solution

Keirudin AA, Zainuddin N, Yusof NA

Polymers (Basel), 2020 Oct 24;12(11).
PMID: 33114335 DOI: 10.3390/polym12112465

In the present study, CMSS (carboxymethyl sago starch)-based hydrogel was synthesized by crosslinking with citric acid via esterification and then applied as a metal sorbent to overcome excessive heavy metal pollution. The CMSS/CA (carboxymethyl sago starch/citric acid) hydrogel was characterized by Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The absorption band at 1726 cm-1 was observed in the FT-IR spectrum of CMSS/CA hydrogel and indicated ester bonds formed. Further findings show that the cross-linkages in the CMSS/CA hydrogel increased the thermal stability of CMSS and various sizes of pores were also shown in the SEM micrograph. Conversely, the removal of heavy metals was analyzed using Inductively Coupled Plasma-Optic Emission Spectra (ICP-OES). The effects of the pH of the metal solution, contact time, initial concentration of the metal ions and temperature on the sorption capacity were investigated. Under optimum condition, the sorption capacity of Pb2+, Cu2+, Ni2+ and Zn2+ onto CMSS/CA hydrogel were 64.48, 36.56, 16.21, 18.45 mg/g, respectively. The experiments demonstrated that CMSS/CA hydrogel has high selectivity towards Pb2+ in both non-competitive and competitive conditions. In conclusion, the CMSS/CA hydrogel as a natural based heavy metal sorption material exhibited a promising performance, especially in the sorption of Pb2+ for wastewater treatment.

Matched MeSH terms: Waste Water
Fulltext Microalgal metabolites as anti-cancer/anti-oxidant agents reduce cytotoxicity of elevated silver nanoparticle levels against non-cancerous vero cells

Hussein HA, Maulidiani M, Abdullah MA

Heliyon, 2020 Oct;6(10):e05263.
PMID: 33102866 DOI: 10.1016/j.heliyon.2020.e05263

Heavy metal pollution has become a major concern globally as it contaminates eco-system, water networks and as finely suspended particles in air. In this study, the effects of elevated silver nanoparticle (AgNPs) levels as a model system of heavy metals, in the presence of microalgal crude extracts (MCEs) at different ratios, were evaluated against the non-cancerous Vero cells, and the cancerous MCF-7 and 4T1 cells. The MCEs were developed from water (W) and ethanol (ETH) as green solvents. The AgNPs-MCEs-W at the 4:1 and 5:1 ratios (v/v) after 48 and 72 h treatment, respectively, showed the IC50 values of 83.17-95.49 and 70.79-91.20 μg/ml on Vero cells, 13.18-28.18 and 12.58-25.7 μg/ml on MCF-7; and 16.21-33.88 and 14.79-26.91 μg/ml on 4T1 cells. In comparison, the AgNPs-MCEs-ETH formulation achieved the IC50 values of 56.23-89.12 and 63.09-91.2 μg/ml on Vero cells, 10.47-19.95 and 13.48-26.61 μg/ml on MCF-7; 14.12-50.11 and 15.13-58.88 μg/ml on 4T1 cells, respectively. After 48 and 72 h treatment, the AgNPs-MCE-CHL at the 4:1 and 5:1 ratios exhibited the IC50 of 51.28-75.85 and 48.97-69.18 μg/ml on Vero cells, and higher cytotoxicity at 10.47-16.98 and 6.19-14.45 μg/ml against MCF-7 cells, and 15.84-31.62 and 12.58-24.54 μg/ml on 4T1 cells, respectively. The AgNPs-MCEs-W and ETH resulted in low apoptotic events in the Vero cells after 24 h, but very high early and late apoptotic events in the cancerous cells. The Liquid Chromatography-Mass Spectrometry-Electrospray Ionization (LC-MS-ESI) metabolite profiling of the MCEs exhibited 64 metabolites in negative ion and 56 metabolites in positive ion mode, belonging to different classes. The microalgal metabolites, principally the anti-oxidative components, could have reduced the toxicity of the AgNPs against Vero cells, whilst retaining the cytotoxicity against the cancerous cells.

Matched MeSH terms: Water
Fulltext Decoding Antioxidant and Antibacterial Potentials of Malaysian Green Seaweeds: Caulerpa racemosa and Caulerpa lentillifera

Yap WF, Tay V, Tan SH, Yow YY, Chew J

Antibiotics (Basel), 2019 Sep 17;8(3).
PMID: 31533237 DOI: 10.3390/antibiotics8030152

Seaweeds are gaining a considerable amount of attention for their antioxidant and antibacterial properties. Caulerpa racemosa and Caulerpa lentillifera, also known as 'sea grapes', are green seaweeds commonly found in different parts of the world, but the antioxidant and antibacterial potentials of Malaysian C. racemosa and C. lentillifera have not been thoroughly explored. In this study, crude extracts of the seaweeds were prepared using chloroform, methanol, and water. Total phenolic content (TPC) and total flavonoid content (TFC) were measured, followed by in vitro antioxidant activity determination using 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. Antibacterial activities of these extracts were tested against Methicillin-resistant Staphylococcus aureus (MRSA) and neuropathogenic Escherichia coli K1. Liquid chromatography-mass spectrometry (LCMS) analysis was then used to determine the possible compounds present in the extract with the most potent antioxidant and antibacterial activity. Results showed that C. racemosa chloroform extract had the highest TPC (13.41 ± 0.86 mg GAE/g), antioxidant effect (EC50 at 0.65 ± 0.03 mg/mL), and the strongest antibacterial effect (97.7 ± 0.30%) against MRSA. LCMS analysis proposed that the chloroform extracts of C. racemosa are mainly polyunsaturated and monounsaturated fatty acids, terpenes, and alkaloids. In conclusion, C. racemosa can be a great source of novel antioxidant and antibacterial agents, but isolation and purification of the bioactive compounds are needed to study their mechanism of action.

Matched MeSH terms: Water
Molecularly imprinted polymer for the removal of diclofenac from water: Synthesis and characterization

Samah NA, Sánchez-Martín MJ, Sebastián RM, Valiente M, López-Mesas M

Sci Total Environ, 2018 Aug 01;631-632:1534-1543.
PMID: 29727977 DOI: 10.1016/j.scitotenv.2018.03.087

Contaminants of Emerging Concerns (CECs) have been introduced as one type of recalcitrant pollutant sources in water. In this study, the non-steroidal anti-inflammatory drug diclofenac (DCF) has been removed from water solutions using Molecularly Imprinted Polymer (MIP), synthetized via bulk polymerization with allylthiourea (AT) as the functional monomer and using DCF as template (MIP-DCF). DCF detection has been performed by UV spectrophotometer. From the kinetic study in batch mode, approximately 100% of removal is observed by using 10mg of MIP-DCF, with an initial concentration of 5mg/L of DCF at pH7, within 3min and agitated at 25°C. In continuous flow mode study, using a cartridge pre-packed with 10mg of MIP-DCF, a high adsorption capacity of 160mgDCF/g MIP was obtained. To study the porosity of MIPs, scanning electron microscopy (SEM) has been used. In order to characterize the chemical interaction between monomer and template, the pre-polymerization mixture for MIP and DCF has also been studied by 1H NMR. One of the chemical shift observed has been related to the formation of a complex between amine protons of thiourea group of AT with carboxylic acid on DCF. In conclusion, the developed MIP works as a good adsorbent for DCF removal, and is selective to DCF in the presence of indomethacin and ibuprofen.

Matched MeSH terms: Water
Bioinspired 2D carbon sheets decorated with MnFe2O4 nanoparticles for preconcentration of inorganic arsenic, and its determination by ICP-OES

Ahmad H, Haseen U, Umar K, Ansari MS, Ibrahim MNM

Mikrochim Acta, 2019 08 27;186(9):649.
PMID: 31456042 DOI: 10.1007/s00604-019-3753-6

The authors describe a method for solvent-free mechano-chemical synthesis of a bioinspired sorbent. A 2D ultra-thin carbon sheet similar to graphene oxide was prepared using a natural waste (onion sheet). The formation of 2D carbon sheets was confirmed by Raman spectroscopy, X-ray photoelectron spectroscopy and ATR-IR. The surface morphology was characterized by field emission scanning electron microscopy and high-resolution tunneling electron microscopy. The carbon sheets were decorated with crystalline MnFe2O4 nanoparticles by solid-state reaction at room temperature. The presence of magnetic particles in the final product was confirmed by vibrating sample magnetometry and electron microscopy. The synergistic effect of carbon sheets and MnFe2O4 led to an enhanced sorption of arsenic species compared to bare carbon sheets or to MnFe2O4 nanoparticles. A column was prepared for the simultaneous preconcentration and determination of trace levels of As(III) and As(V) from water samples. The preconcentration factors are between 900 and 833 for As(III) and As(V) species, respectively. The linearity of the calibration plot ranges from 0.4-10 ng mL-1. The detection limits (at 3σ) for both As(III) and As(V) are 30 pg mL-1. The Student's t values for the analysis of spiked samples are lower than the critical Student's t values at a 95% confidence level. The recoveries from spiked water samples range between 99 and 102.8%. Graphical abstract Schematic representation of the preparation of carbon sheets similar to graphene oxide from onion sheaths after pyrolysis at 800 °C. The prepared carbon sheet-MnFe2O4 composite shows excellent arsenic sorption and preconcentration down to the pg mL-1 concentration.

Matched MeSH terms: Water
Fulltext The relationship between bacterial sources and genotype to the antimicrobial resistance pattern of Burkholderia pseudomallei

Sadiq MA, Hassan L, Aziz SA, Zakaria Z, Musa HI, Amin MM

Vet World, 2018 Nov;11(10):1404-1408.
PMID: 30532493 DOI: 10.14202/vetworld.2018.1404-1408

Background: Melioidosis is a fatal emerging infectious disease of both man and animal caused by bacteria Burkholderia pseudomallei. Variations were suggested to have existed among the different B. pseudomallei clinical strains/genotypes which may implicate bacterial susceptibility and resistance toward antibiotics.
Aim: This study was designed to determine whether the phenotypic antibiotic resistance pattern of B. pseudomallei is associated with the source of isolates and the genotype.
Materials and Methods: A collection of 111 B. pseudomallei isolates from veterinary cases of melioidosis and the environments (soil and water) were obtained from stock cultures of previous studies and were phylogenetically characterized by multilocus sequence typing (ST). The susceptibility to five antibiotics, namely meropenem (MEM), imipenem, ceftazidime (CAZ), cotrimoxazole (SXT), and co-amoxiclav (AMC), recommended in both acute and eradication phases of melioidosis treatment were tested using minimum inhibitory concentration antibiotics susceptibility test.
Results: Majority of isolates were susceptible to all antibiotics tested while few resistant strains to MEM, SXT, CAZ, and AMC were observed. Statistically significant association was found between resistance to MEM and the veterinary clinical isolates (p<0.05). The likelihood of resistance to MEM was significantly higher among the novel ST 1130 isolates found in veterinary cases as compared to others.
Conclusion: The resistance to MEM and SXT appeared to be higher among veterinary isolates, and the novel ST 1130 was more likely to be resistant to MEM as compared to others.

Matched MeSH terms: Water
Microbial Community Structure in a Malaysian Tropical Peat Swamp Forest: The Influence of Tree Species and Depth

Too CC, Keller A, Sickel W, Lee SM, Yule CM

Front Microbiol, 2018;9:2859.
PMID: 30564202 DOI: 10.3389/fmicb.2018.02859

Tropical peat swamp forests sequester globally significant stores of carbon in deep layers of waterlogged, anoxic, acidic and nutrient-depleted peat. The roles of microbes in supporting these forests through the formation of peat, carbon sequestration and nutrient cycling are virtually unknown. This study investigated physicochemical peat properties and microbial diversity between three dominant tree species: Shorea uliginosa (Dipterocarpaceae), Koompassia malaccensis (legumes associated with nitrogen-fixing bacteria), Eleiodoxa conferta (palm) and depths (surface, 45 and 90 cm) using microbial 16S rRNA gene amplicon sequencing. Water pH, oxygen, nitrogen, phosphorus, total phenolic contents and C/N ratio differed significantly between depths, but not tree species. Depth also strongly influenced microbial diversity and composition, while both depth and tree species exhibited significant impact on the archaeal communities. Microbial diversity was highest at the surface, where fresh leaf litter accumulates, and nutrient supply is guaranteed. Nitrogen was the core parameter correlating to microbial communities, but the interactive effects from various environmental variables displayed significant correlation to relative abundance of major microbial groups. Proteobacteria was the dominant phylum and the most abundant genus, Rhodoplanes, might be involved in nitrogen fixation. The most abundant methanogens and methanotrophs affiliated, respectively, to families Methanomassiliicoccaceae and Methylocystaceae. Our results demonstrated diverse microbial communities and provide valuable insights on microbial ecology in these extreme ecosystems.

Matched MeSH terms: Water
Fulltext Adsorption of sulfur dioxide (SO2) gas using treated rice husk ash (RHA) adsorbent

Nurul Najwa Abd Malek, Rusdin Laiman

Science Letters, 2018;12(1):63-76.
MyJurnal

The aim of this study was to investigate the potential of treated rice husk ash (RHA) as adsorbent to adsorb acidic SO2 gas. The treated RHA was prepared using a water hydration method by mixing the RHA, Calcium oxide (CaO) and Sodium Hydroxide (NaOH). The addition of NaOH is to increase the dissolution of silica from the RHA to form reactive species responsible for higher desulfurization activity. The untreated and treated RHA were subjected to several characterizations and the characteristics of the adsorbents were compared. The functional groups present on the surface of the adsorbent were determined using Fourier Transform Infrared (FTIR). The chemical composition of the untreated and treated RHA was analyzed by using X-ray Fluorescence (XRF). Scanning electron microscope (SEM) analysis showed that the treated RHA has higher porosity compared to untreated RHA. Based on the SO2 adsorption analysis, it was found that the treated RHA has higher adsorption capacity, 62.22 mg/g, compared to untreated RHA, 1.49 mg/g.

Matched MeSH terms: Water
Fulltext Zamzam water: influence of containers on ionic concentration and in-vitro cytotoxic effects on U87 cell line

Nasir Mohamad, Shariff Halim, Mohd Ekhwan Toriman, Nor Hidayah Abu Bakar, Ahmad Zubaidi A. Latif

Malaysian Journal of Applied Sciences, 2018;1(1):68-72.
MyJurnal

Zamzam is holy water believed by Muslim to have remedial power for all kinds of diseases. It contains
many electrolytes and the concentration of the electrolytes may be affected by the types of container
used for its storage. This study was carried out to determine the difference in ions concentration of
Zamzam water stored in plastic and glass containers, and to determine cytotoxicity effects of Zamzam
water against U-87 cell line (human primary glioblastoma cell line). Ion Chromatography (IC) was used
to analyze the concentration. The analyzed anions in the Zamzam water include bromide, chloride,
phosphate, nitrite, nitrate, sulfate and fluoride whereas the cations were ammonium, lithium, potassium,
sodium, calcium and magnesium. Subsequently, MTT assay was used to determine the cytotoxicity of
Zamzam water on U-87 cell line. This study reveals that Zamzam water anions and cations
concentration was not statistically significant neither in plastic nor glass container. In addition, the
Zamzam water did not cause any toxicity on the U87 cell line. We postulate that types of container do
not have much influence on the ion concentration of Zamzam water and it is non-toxic on U87 cell line.

Matched MeSH terms: Water
Comparison of DNA profiling between fishes and pork meat using polymerase chain reaction-restriction fragment length polymorphisms (PCR-RFLP) analysis

Safiyyah Shahimi, Wan Sakeenah Wan Nazri, Aminah Abdullah, Norrakiah Abdullah Sani, Sahilah Abd. Mutalib

Sains Malaysiana, 2018;47:1535-1540.

Genomic DNA of 13 fish (n=13) species consist of four freshwater which were catfish (Clarias gariepinus), shark catfish (Pangasius larnaudii), tilapia (Oreochromis mossambicus), perch (Lates calcarifer) and nine marine species which were black pomfret (Parastromateus niger), anchovy (Stolephorus commersonii), mabong (Rastrelliger kanagurta), red snapper (Lutjanus erythropterus), herring (Chirocentrus dorab), ray fish (Himantura gerrardii), sardine (Decapterus macrosoma), mackerel (Euthynnus affinis) and tuna (Thunnus tuna) were differentiated using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Seven endonucleases of AluI, BsaJI, HaeIII, HindIII, HinfI, MboI and MboII were examined for the ability to digest cyt b amplicon from each species. Genomic DNA of pork (Sus scrofa domestica) were differentiated from fishes by comparing the digestion patterns produced by similar amplified region and enzymes used. In the present study, it was demonstrated that fishes and pork DNA genome were successfully differentiated using all endonucleases except for HindIII. Thus, PCR-RFLP analysis was found useful for future pork DNA detection in fish products.

Matched MeSH terms: Fresh Water
Comparison of time-restricted feeding and Islamic fasting: a scoping review

Ismail S, Manaf RA, Mahmud A

East Mediterr Health J, 2019 Jun 04;25(4):239-245.
PMID: 31210344 DOI: 10.26719/emhj.19.011

Background: Research on the health benefits of fasting is growing; this includes time-restricted feeding and Islamic fasting.
Aims: This article aims to review and highlight the similarities and differences between time-restricted feeding and Islamic fasting during Ramadan.
Methods: A scoping review was undertaken to identify relevant articles that answered the research question: what are the similarities and differences in characteristics of time-restricted feeding and Islamic fasting? MEDLINE/PubMed was searched using the terms: time-restricted feeding, and weight. Inclusion criteria were: original research and review articles; written in English; and published between the years 2000 and 2017.
Results: A total of 25 articles that answered the research question were included in the review: 15 original research papers and 10 reviews. The findings suggest that Ramadan fasting is a form of time-restricted feeding in the contemporary context because of the period when eating is not allowed. The fasting duration reported in time-restricted feeding ranged from 4 to 24 hours, which is longer than that of Islamic fasting which is between 8 and 20 hours. Both time-restricted feeding and Islamic fasting have been found to have positive health effects, including weight reduction.
Conclusion: Time-restricted feeding and Islamic fasting have many similar characteristics and reported positive health effects.

Matched MeSH terms: Drinking Water

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links