The study explores the spatio-temporal variation of water quality parameters in the Hooghly estuary, which is considered an ecologically-stressed shallow estuary and a major distributary for the Ganges River. The estimated parameters are chlorophyll-a, total suspended matter (TSM), and chromophoric dissolved organic matter (CDOM). The Sentinel-3 OLCI remote sensing imageries were analyzed for the duration of October 2018 to February 2019. We observed that the water quality of the Hooghly estuaries is comparatively low-oxygenated, mesotrophic, and phosphate-limited. Ongoing channel dredging for maintaining shipping channel depth keeps the TSM in the estuary at an elevated level, with the highest amount of TSM observed during March of 2019 (41.59g m-3) at station A, upstream point. Since the pre-monsoon season, TSM data shows a decreasing trend towards the mouth of the estuary. Chl-a concentration is higher during pre-monsoon than monsoon and post-monsoon periods, with the highest value observed in April at 1.09 mg m-3 in station D during the pre-monsoon period. The CDOM concentration was high in the middle section (January-February) and gradually decreased towards the estuary's head and mouth. The highest CDOM was found in February at locations C and D during the pre-monsoon period. Every station shows a significant correlation among CDOM, TSM, and Chl-a measured parameters. Based on our satellite data analysis, it is recommended that SNAP C2RCC be regionally used for TSM, Chl-a, and CDOM for water quality product retrieval and in various algorithms for the Hooghly estuary monitoring.
The spatial and temporal distributions of trace metals in dissolved forms mainly result from anthropogenic and lithogenic contributions. Surface water samples (∼0.5 m) were collected monthly at respective stations from Setiu Wetland. In this study, the behaviour of trace metals in the dissolved phases along the water column from sampling sites in the Setiu Wetland, Malaysia was investigated. In addition, dissolved organic carbon (DOC) and physical parameters such as salinity, temperature, pH and dissolved oxygen (DO) of the surface water were measured in order to evaluate the relationship between trace metals fractionation with different water quality parameters. Size fractionation study of dissolved trace metals using ultrafiltration technique were also carried out and analysed using inductively coupled plasma mass spectrometry (ICP-MS). Correlation of trace metals with other measured parameters was made to furthermore understand the dynamics of trace metals and its fractionated components in this area. The concentration of dissolved trace metals was in the range of 0.001-0.16 μg/L for Cd, 0.12-2.81 μg/L for Cu, 0.01-1.84 μg/L for Pb, 3-17 μg/L for Fe and 1-34 μg/L for Zn, suggesting the input of anthropogenic sources for trace metals such as municipal, industrial, agricultural and domestic discharge. The periodic monitoring and evaluation of trace metals in wetlands and protected tropical areas is highly recommended.
Soil samples from vegetable farmland in densely populated wards of Nepal were analyzed for natural radionuclide levels, employing a NaI(Tl) 3" [Formula: see text] 3" gamma detector. The study aimed to evaluate the causes of radiation risk, attributing it to soil contamination resulting from the rapid urbanization and concretization that followed the earthquake in 2015. The activity concentration of radium-226, thorium-232, and potassium-40 and the ranges observed are 2.080±0.084-33.675±1.356 Bq kg[Formula: see text], 17.222±0.198-119.949±1.379 Bq kg[Formula: see text], and 11.203 ± 0.325-748.828±21.716 Bq kg[Formula: see text], respectively. The average values obtained for hazard indices are as follows: radium equivalent activity (82.779 Bq kg[Formula: see text]), absorbed dose rate (36.394 nGy h[Formula: see text]), annual effective dose equivalent (0.045 mSv yearr[Formula: see text]), gamma index (0.291), external hazard index (0.224), internal hazard index (0.253), excess lifetime cancer risk (0.159), annual gonadal dose equivalent (243.278 mSv year[Formula: see text]), alpha index (0.054), and activity utilization index (0.716). However, in most places, thorium-232 concentration is greater than those of the world average and recommended values. In specific locations such as Ward 4 in Baluwatar, the soil was found to have concentrations of Ra[Formula: see text] and K[Formula: see text] exceeding recommended limits. Despite this localized concern, the overall analysis of hazard indices across the studied areas revealed that most values were within permissible limits. This suggests that, on a broader scale, radiation exposure may not be a significant concern in the investigated regions. Nonetheless, the study recommends regular monitoring in additional locations to ensure a comprehensive and ongoing assessment of radiation levels.
Microplastics (particles smaller than 5 mm) are among the most common pollutants in aquatic habitats because they may develop to high densities and can interact with both the abiotic and biotic environments. There is less information available on microplastics in the freshwater systems than there is in the marine environment. This study aims to shed light on the abundance and spatial distribution of microplastics in the Brahmaputra River (Mymensingh) through the utilization of the wet peroxide oxidation isolation technique, supplemented with sodium chloride, to examine fish and sediment specimens collected between December 21, 2022 and January 12, 2023. A total of 26 and 189 microplastic particles were identified in the fish and sediment samples, respectively. Microplastics (MPs) concentrations in fish gut ranged from 0.5 ± 0.7 to 1.67 ± 0.58 MPs individual-1. The most prevalent shape found in fish stomachs was fiber (46%), and the most common color was transparent (32%). Sizes 0.5-1 mm (1.6 ± 0.74) had the most microplastics. This study found that fishes from the demersal (3.25 ± 1.7) zone had more MPs than the benthopelagic (2.5 ± 0.58) and pelagic (1.5 ± 0.7) zones. Omnivorous fishes (54%) consumed more microplastics than carnivorous (31%, 2.6 ± 0.58) and herbivorous fishes (15%,1.33 ± 0.94). Microplastic consumption had a moderate correlation with fish body weight (r = 0.34), length (r = 0.46), and gastrointestinal content (r = 0.45). The MPs per kilogram of Brahmaputra River bed sediment ranged from 8 to 31, with a mean abundance of 18.9 ± 7.01 particles kg-1. The most common shape identified in this study was fragments (52%) and 33% of sediment microplastics were blue in color. Microplastics were most abundant in the 1-3 m-meter size class. Fourier transform infrared spectroscopy (FTIR) showed that polypropylene (PP) was the most prevalent MP in both fish (34%) and sediment (40%) samples. In this study, the Pollution load index (PLI) for each sampling site is <10, with the highest value found for station 2(1.97 ± 0.49), regarded as risk category I. This study's results will be useful for future research on microplastics in freshwater environments. PRACTITIONER POINTS: Abundance and distribution of microplastics were determined from the longest river of Bangladesh. The structural properties of microplastics were characterized using ATR-FTIR spectroscopy. Pollution load index (PLI) of microplastics was investigated.
This study investigates aliphatic and polycyclic aromatic hydrocarbons in sediments from offshore Ghana, focusing on their distribution, sources, and ecological risk. Samples were collected from 15 sites near Deep Water Tano and West Cape Three Points blocks. GC-FID and GC-MS analyses revealed higher concentrations in West Cape Three Points compared to Deep Water Tano. Bayesian source apportionment indicated microorganisms as the primary contributor to AHs in both areas. For polycyclic aromatic hydrocarbons, pyrogenic sources dominated in Deep Water Tano (63.3 %), while grass/coal/wood combustion was primary in West Cape Three Points (60 %). Probabilistic risk assessment identified benzo[a]pyrene as posing the highest ecological risk. This study demonstrates the utility of Bayesian methods in identifying hydrocarbon sources and highlights the importance of species-specific sensitivities in ecological risk assessments, providing valuable insights for marine environment management.
This study presents the first evidence of microplastics in natural sea turtle nests at Chagar Hutang Turtle Sanctuary (CHTS) on Redang Island, a crucial habitat for green turtles. Microplastics were detected in all studied turtle nests (0-70 cm depth), with a total abundance of 12,270 microplastic items per kg dry weight of sand. Fibers (80.7 %) were the most prevalent shape, primarily black (37.9 %), with a high proportion of small-sized particles (<300-1000 μm), indicating prolonged accumulation and environmental degradation. These microplastics, primarily polyethylene terephthalate (PET) and polyethylene (PE), are likely from fishing nets, food packaging, and textiles. Despite the sanctuary's remote location, it is heavily impacted by microplastics carried by tides and wind, raising concerns about their potential effects on turtle egg incubation. The findings offer critical insights into the impact of microplastics on turtle habitats and underscore the urgent need for conservation efforts to protect green sea turtles in Malaysia.
Heavy metal pollution in aquatic ecosystems can lead to harmful accumulation in organisms like stingrays, posing potential health risks to humans. To assess this risk, 45 stingrays were sampled from Johor Waters (Pontian, Muar, and Batu Pahat) and analyzed for heavy metal content using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The average concentrations of Cu, Zn, As, Cd, Pb, and Hg in the fillets were 0.982±0.637, 31.3±5.93, 93.57±24.5, 0.039±0.047, 0.158±0.036, and 0.592±0.424 μg/g dw, respectively. Arsenic (As) was found at the highest concentration. The study indicates that fish size does not directly influence heavy metal accumulation and that metal levels vary by location. Calculated consumption limits for different metals are crucial for human safety. This data is valuable for evaluating contamination risks and guiding future research to protect marine ecosystems in Johor Waters.
As human activities continue to increase, the global production of pollutants has increased significantly, with the majority of pollutants being transported to the ocean via rivers, resulting in intensified pollution in estuaries and coastal areas. To maintain a healthy marine ecological environment, it is necessary to consider rivers, estuaries, and coastal seas as integrated systems and implement pollution management based on the concept of land-ocean integration. In this study, heavy metal elements in the surface sediments of Selangor River-Estuary-Coastal Shelf Continuum were collected and analysed to assess their pollution levels and potential ecological risks. The results show that the heavy metal content is high in the downstream and estuarine regions, with a general decreasing trend observed from nearshore to offshore in the coastal shelf area. The heavy metal pollution assessment indicates that the surface sediments of the Selangor River-Estuary-Coastal Shelf continuum were contaminated, with the most severe pollution occurring downstream and within the estuary. The pollution levels gradually decrease after exiting the estuary. The ecological risk associated with heavy metal pollution in rivers, estuaries, and southeastern coastal areas was classified as moderate to serious, whereas other areas exhibited only slight ecological risks. Specifically, As causes serious pollution in the river and estuary, with moderate-to-serious pollution in the coastal shelf area and moderate-to-serious ecological risks, mainly originating from mining within the river basin. Pb causes moderate pollution in the river, estuary, and coastal areas, with slight ecological risks due to mining within the river basin and inputs from nearby rivers, ports, and industrial activities. Other heavy metals cause minor pollution and pose minimal ecological risks.
Nitrogen dioxide (NO2) is a major cause of respiratory disorders in outdoor and indoor environments. Real-time NO2 monitoring using nonintrusive wearable devices can save lives and provide valuable health data. This study reports a room-temperature, wearable, and flexible smart NO2 gas sensor fabricated via cost-effective printing technology on a polyimide substrate. The sensor uses alkali lignin with edge-oxidised graphene oxide (EGO-AL) ink, demonstrating a sensitivity of 1.70% ppm⁻1 and a detection limit of 12.70 ppb, with excellent selectivity towards NO2. The high sensing properties are attributed to labile oxygen functional groups from GO and alkali lignin, offering abundant interacting sites for NO2 adsorption and electron transfer. The sensor fully recovers to the baseline after heat treatment at 150 °C, indicating its reusability. Integration into lab coats showcased its wearable application, utilising a flexible printed circuit board to wirelessly alert the wearer via cell phone to harmful NO2 levels (>3 ppm) in the environment. This smart sensing application underscores the potential for practical, real-time air quality monitoring, personal safety enhancement, and health management.
Contamination of endocrine disrupting compounds (EDCs) in tap water is an emerging global issue, and there are abundant influencing factors that have an ambivalent effect on their transportation and fate. Different housing types vary in terms of water distribution system operation and design, water consumption choices, and other hydraulic factors, which potentially affect the dynamics, loadings, and partitioning of pollutants in tap water. Thus, this study analyzed 18 multiclass EDCs in tap water from different housing types (i.e., landed and high-rise) and the associated health risks. Sample analyses revealed the presence of 16 EDCs, namely hormones (5), pharmaceuticals (8), a pesticide (1), and plasticizers (2) in tap water, with the prevalent occurrence of bisphenol A up to 66.40 ng/L in high-rise housing. The presence of caffeine and sulfamethoxazole distribution in tap water was significantly different between landed and high-rise housings (t(152) = -2.298, p = 0.023 and t(109) = 2.135, p = 0.035). Moreover, the salinity and conductivity of tap water in high-rise housings were significantly higher compared to those in landed housings (t(122) = 2.411, p = 0.017 and t(94) = 2.997, p = 0.003, respectively). Furthermore, there were no potential health risks of EDCs (risk quotient
The invasive weed Asystasia gangetica was investigated for its potential as a biomonitor and as a phytoremediator of potentially toxic metals (PTMs) (Cd, Cu, Ni, Pb, and Zn) in Peninsular Malaysia owing to its ecological resistance towards unfavourable environments. The biomonitoring potential of PTMs was determined based on the correlation analysis of the metals in the different parts of the plant (leaves, stems, and roots) and its habitat topsoils. In the roots, the concentrations (mg/kg dry weight) of Cd, Cu, Ni, Pb, and Zn ranged from 0.03 to 2.18, 9.22 to 139, 0.63 to 5.47, 2.43 to 10.5, and 50.7 to 300, respectively. In the leaves, the concentrations (mg/kg dry weight) of Cd, Cu, Ni, Pb, and Zn ranged from 0.03 to 1.16, 7.94 to 20.2, 0.03 to 6.13, 2.10 to 21.8, and 18.8 to 160, respectively. In the stems, the concentrations (mg/kg dry weight) of Cd, Cu, Ni, Pb, and Zn ranged from 0.03 to 1.25, 5.57 to 11.8, 0.23 to 3.69, 0.01 to 7.79, and 26.4 to 246, respectively. On the other hand, the phytoremediation potential of the five metals was estimated based on the bioconcentration factor (BCF) and the translocation factor (TF) values. Correlation analysis revealed that the roots and stems could be used as biomonitors of Cu, the stems as biomonitors of Ni, the roots and leaves as biomonitors of Pb, and all three parts of the plant as biomonitors of Zn. According to the BCF values, in the topsoil, the "easily, freely, leachable, or exchangeable" geochemical fractions of the five metals could be more easily transferred to the roots, leaves, and stems when compared with total concentrations. Based on the TF values of Cd, Ni, and Pb, the metal transfer to the stems (or leaves) from the roots was efficient (>1.0) at most sampling sites. The results of BCF and TF showed that A. gangetica was a good phytoextractor for Cd and Ni, and a good phytostabilizer for Cu, Pb, and Zn. Therefore, A. gangetica is a good candidate as a biomonitor and a phytoremediator of Ni, Pb, and Zn for sustainable contaminant remediation subject to suitable field management strategies.
Nano/microplastics (NPs/MPs), a tiny particle of plastic pollution, are known as one of the most important environmental threats to marine ecosystems. Wastewater treatment plants can act as entrance routes for NPs/MPs to the aquatic environment as they breakdown of larger fragments of the plastic component during the treatment process; therefore, it is necessary to remove NPs/MPs during the wastewater treatment process. In this study, understanding the effect of water shear force on the fragmentation of larger size MPs into smaller MPs and NPs and their removal by air flotation and nano-ferrofluid (i.e., magnetite and cobalt ferrite particle as a coagulant) and membrane processes were investigated as a proof-of-concept study. It is found that a two-blade mechanical impeller could fragment MPs from 75, 150 and 300 μm into mean size NPs/MPs of 0.74, 1.14 and 1.88 μm, respectively. Results showed that the maximum removal efficiency of polyethylene, polyvinyl chloride and polyester was 85, 82 and 69%, respectively, in the air flotation process. Increasing the dose of behentrimonium chloride surfactant from 2 to 10 mg/L improved the efficiency of the air flotation process for NPs/MPs removal. It is also found that the removal efficiency of NPs/MPs by the air flotation system depends on solution pH, size, and types of NPs/MPs. This study also found a less significant removal efficiency of NPs/MPs by both types of ferrofluid used in this study with an average removal of 43% for magnetite and 55% for cobalt ferrite. All three plastics tested had similar removal efficiency by the nano-ferrofluid particles, meaning that this removal technique does not rely on the plastic component type. Among all the process tested, both ultrafiltration and microfiltration membrane processes were highly effective, removing more than 90% of NPs/MPs fragment particles. Overall, this study has confirmed the effectiveness of using air flotation and the membrane process to remove NPs/MPs from wastewater.
Microplastic pollution is a prevalent and serious problem in marine environments. These particles have a detrimental impact on marine ecosystems. They are harmful to marine organisms and are known to be a habitat for toxic microorganisms. Marine microplastics have been identified in beach sand, the seafloor and also in marine biota. Although research investigating the presence of microplastics in various marine environments have increased across the years, studies in Southeast Asia are still relatively limited. In this paper, 36 studies on marine microplastic pollution in Southeast Asia were reviewed and discussed, focusing on microplastics in beach and benthic sediments, seawater and marine organisms. These studies have shown that the presence of fishing harbours, aquaculture farms, and tourism result in an increased abundance of microplastics. The illegal and improper disposal of waste from village settlements and factories also contribute to the high abundance of microplastics observed. Hence, it is crucial to identify the hotspots of microplastic pollution, for assessment and mitigation purposes. Future studies should aim to standardize protocols and quantification, to allow for better quantification and assessment of the levels of microplastic contamination for monitoring purposes.
The gravity of the impending threats posed by microplastics (MPs) pollution in the environment cannot be over-emphasized. Several research studies continue to stress how important it is to curb the proliferation of these small plastic particles with different physical and chemical properties, especially in aquatic environments. While several works on how to monitor, detect and remove MPs from the aquatic environment have been published, there is still a lack of explicit regulatory framework for mitigation of MPs globally. A critical review that summarizes recent advances in MPs research and emphasizes the need for regulatory frameworks devoted to MPs is presented in this paper. These frameworks suggested in this paper may be useful for reducing the proliferation of MPs in the environment. Based on all reviewed studies related to MPs research, we discussed the occurrence of MPs by identifying the major types and sources of MPs in water bodies; examined the recent ways of detecting, monitoring, and measuring MPs routinely to minimize projected risks; and proposed recommendations for consensus regulatory actions that will be effective for MPs mitigation.
This study determines the bulk surface water (BSW) dissolved inorganic nutrients of nitrogen (DINi) and phosphate (DIP) during the upwelling season off the east coast of Peninsular Malaysia, South China Sea. BSW samples were analysed for DINi and DIP by using a standard automated colorimetric method. BSW DINi and DIP concentrations varied between 0.11 and 2.55 μM (mean 1.12 ± 0.63 μM), and below detection limit, and 0.29 μM (mean 0.11 ± 0.08 μM), respectively. The spatial distribution of higher concentrations between DINi and DIP was distinct. However, the highest concentrations of DINi and DIP were mostly recorded in the month of peak upwelling (July and August), where colder BSW temperatures were also encountered during field sampling. This study provides new evidence on the presence of BSW nutrients of DINi and DIP during upwelling season peak in July and August before their decline in September.
Microplastics are the small fragments of the plastic molecules which find their applications in various routine products such as beauty products. Later, it was realized that it has several toxic effects on marine and terrestrial organisms. This review is an approach in understanding the microplastics, their origin, dispersal in the aquatic system, their biodegradation and factors affecting biodegradation. In addition, the paper discusses the major engineering approaches applied in microbial biotechnology. Specifically, it reviews microbial genetic engineering, such as PET-ase engineering, MHET-ase engineering, and immobilization approaches. Moreover, the major challenges associated with the plastic removal are presented by evaluating the recent reports available.
The utilization of plastics has now become a threat to the environment as it generates microplastic particles (<5 mm in size). The increasing studies on the occurrence of microplastics in different environmental compartments have raised concern about the potential effects on ecosystems and living organisms. Of these, numerous studies are focused on marine environments. The occurrence of microplastics is recently extended to the freshwater environments, including river systems, streams, lakes, pond, creek, and estuarine rivers. This paper overviews the current knowledge and research findings on the occurrence of microplastics in water, sediment, and fish in freshwater environments. The review also covers the adopted methodology and impacts of microplastics to the ecosystem. Future perspectives are discussed as well in this review.
The generation of microplastics (MPs) has increased recently and become an emerging issue globally. Due to their long-term durability and capability of traveling between different habitats in air, water, and soil, MPs presence in freshwater ecosystem threatens the environment with respect to its quality, biotic life, and sustainability. Although many previous works have been undertaken on the MPs pollution in the marine system recently, none of the study has covered the scope of MPs pollution in the freshwater. To consolidate scattered knowledge in the literature body into one place, this work identifies the sources, fate, occurrence, transport pathways, and distribution of MPs pollution in the aquatic system with respect to their impacts on biotic life, degradation, and detection techniques. This article also discusses the environmental implications of MPs pollution in the freshwater ecosystems. Certain techniques for identifying MPs and their limitations in applications are presented. Through a literature survey of over 276 published articles (2000-2023), this study presents an overview of solutions to the MP pollution, while identifying research gaps in the body of knowledge for further work. It is conclusive from this review that the MPs exist in the freshwater due to an improper littering of plastic waste and its degradation into smaller particles. Approximately 15-51 trillion MP particles have accumulated in the oceans with their weight ranging between 93,000 and 236,000 metric ton (Mt), while about 19-23 Mt of plastic waste was released into rivers in 2016, which was projected to increase up to 53 Mt by 2030. A subsequent degradation of MPs in the aquatic environment results in the generation of NPs with size ranging from 1 to 1000 nm. It is expected that this work facilitates stakeholders to understand the multi-aspects of MPs pollution in the freshwater and recommends policy actions to implement sustainable solutions to this environmental problem.
Despite of our growing understanding of microplastic's implications, research on the effects of fibrous microplastic (FMPs) on the environment is still in its infancy. Some scientists have hypothesized the possibility of natural textile fibres, which may act as one of the emerging environmental pollutants prevalent among microplastic pollutants in the environment. Therefore, this review aims to critically evaluate the toxic effects of emerging FMPs, the presence, and sources of FMPs in the environment, identification and analytical techniques, and the potential impact or toxicity of the FMPs on the environment and human health. About175 publications (2011-2023) based on FMPs were identified and critically reviewed for transportation, analysis and ecotoxicological behaviours of FMPs in the environment. Textile industries, wastewater treatment plants, and household washing of clothes are significant sources of FMPs. In addition, various characterization techniques (e.g., FTIR, SEM, RAMAN, TGA, microscope, and X-Ray Fluorescence Spectroscopy) commonly used for the identification and analysis of FMPs are also discussed, which justifies the novelty aspects of this review. FMPs are pollutants of emerging concern due to their prevalence and persistence in the environment. FMPs are also found in the food chain, which is an alarming situation for living organisms, including effects on the nervous system, digestive system, circulatory system, and genetic alteration. This review will provide readers with a comparison of different analytical techniques, which will be helpful for researchers to select the appropriate analytical techniques for their study and enhance their knowledge about the harmful effects of FMPs.