MyMedR

Underutilised palm stearin as hard stock for deep-frying medium and its performance for oil uptake in instant noodles

Ooi EZH, Ab Karim NA, Chan ES, Wang Y, Tang TK, Tong SC, et al.

J Sci Food Agric, 2024 May;104(7):3958-3970.

BACKGROUND: As a by-product of the palm oil industry, palm stearin is often overlooked despite having several beneficial properties, such as excellent stability, which is critically essential to meet the demand of the global food trend in producing safer processed food. Specifically, deep frying of food is often associated with the production of toxic compounds that could potentially migrate into the food system when oils are degraded under continuous heating. The incorporation of palm stearin is regarded as a cost-effective and efficient method to modify the fatty acid composition of oils, enhance the frying qualities and lower the degradation rate.

RESULTS: This study blended 5% and 10% palm stearin into palm oil to investigate the deep-frying performance and impact on food quality. Increasing the palm stearin content improved the frying oil's oxidative and hydrolytic stability, evidenced by reduction of total polar material, free fatty acid and total oxidation value. Addition of palm stearin increased the slip melting point which improved the oil's oxidative stability but no significant increase in oil content of instant noodles was observed. Scanning electron microscopy and fluorescence microscopy showed the formation of larger pores in the noodle structure that facilitated oil retention.

CONCLUSION: Blending palm stearin into frying oil enhanced the frying stability and minimally affected the oil uptake in instant noodles. This article presents the viability of blending palm stearin into frying oils to develop longer-lasting frying oils. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Matched MeSH terms: Fatty Acids, Nonesterified

Fulltext Ultrasound-assisted extraction (UAE) and solvent extraction of papaya seed oil: yield, fatty acid composition and triacylglycerol profile

Samaram S, Mirhosseini H, Tan CP, Ghazali HM

Molecules, 2013 Oct 10;18(10):12474-87.

PMID: 24152670 DOI: 10.3390/molecules181012474

The main objective of the current work was to evaluate the suitability of ultrasound-assisted extraction (UAE) for the recovery of oil from papaya seed as compared to conventional extraction techniques (i.e., Soxhlet extraction (SXE) and solvent extraction (SE)). In the present study, the recovery yield, fatty acid composition and triacylglycerol profile of papaya seed oil obtained from different extraction methods and conditions were compared. Results indicated that both solvent extraction (SE, 12 h/25 °C) and ultrasound-assisted extraction (UAE) methods recovered relatively high yields (79.1% and 76.1% of total oil content, respectively). Analysis of fatty acid composition revealed that the predominant fatty acids in papaya seed oil were oleic (18:1, 70.5%-74.7%), palmitic (16:0, 14.9%-17.9%), stearic (18:0, 4.50%-5.25%), and linoleic acid (18:2, 3.63%-4.6%). Moreover, the most abundant triacylglycerols of papaya seed oil were triolein (OOO), palmitoyl diolein (POO) and stearoyl oleoyl linolein (SOL). In this study, ultrasound-assisted extraction (UAE) significantly (p < 0.05) influenced the triacylglycerol profile of papaya seed oil, but no significant differences were observed in the fatty acid composition of papaya seed oil extracted by different extraction methods (SXE, SE and UAE) and conditions.

Matched MeSH terms: Fatty Acids/isolation & purification*; Fatty Acids/chemistry

Fulltext UV-Curable Urethane Acrylate Resin from Palm Fatty Acid Distillate

Teo KT, Hassan A, Gan SN

Polymers (Basel), 2018 Dec 11;10(12).

PMID: 30961299 DOI: 10.3390/polym10121374

Palm fatty acid distillate (PFAD), is a by-product of the crude palm oil refining process. It comprises mainly of free fatty acids-around 45% palmitic and 33% oleic acids-as the major components. Ultra-violet (UV) curable urethane acrylate (UA) oligomers could be synthesized from PFAD, by the following procedure. A hydroxyl terminated macromer was first prepared by reacting PFAD with a mixture of isophthalic acid, phthalic anhydride, neopentagylcol (NPG), and pentaerythritol. The macromer was then reacted with 2-hydroxylethylacrylate (2HEA) and toluene diisocynate (TDI) to generate a resin, containing acrylate side chains for UV curable application. A series of UA resins were prepared by using 15, 25, 45, 55, and 70% of PFAD, respectively. The UA resin has Mw in the range of 3,200 to 27,000. They could be cured by UV irradiation at an intensity of 225 mW/cm². Glass transition temperature (Tg) of the cured film was measured by differential scanning calorimeter (DSC), and hardness of the film was determined by a pendulum hardness tester, according to American Society for Testing and Materials (ASTM)4366. The resins were used in a wood-coating application. All of the cured films showed good adhesion, hardness, and chemical resistance except for the one using the 70% PFAD, which did not cure properly.

Matched MeSH terms: Fatty Acids, Nonesterified

Two-level factorial analysis of the effect of fructose on DHA biosynthetic capacity of Aurantiochytrium sp. SW1

Manikan V, Nazir Y, Hamid AA

Heliyon, 2021 Jan;7(1):e06085.

PMID: 33553753 DOI: 10.1016/j.heliyon.2021.e06085

Thraustochytrids are getting increasingly popular due to their high potential role as alternative producers of the high-valued ω-3 polyunsaturated fatty acids (PUFA), docosahexaenoic acid (DHA). While most thraustochytrids prefer glucose as the major carbon source, few strains have been reported to prefer fructose. One such strain is Aurantiochytrium sp. SW1. In this study, the effect of fructose on DHA accumulation by SW1 was investigated using a two-level full factorial design. Besides, biomass, lipid and DHA accumulation profiles of SW1 cultivated in fructose and glucose media were compared. Results revealed that fructose has a very significant positive effect on the volumetric DHA content. Meanwhile, its involvement in affecting DHA biosynthetic capacity, though significant, is not very profound. It was also found that when cultivated in fructose medium, SW1 had a less steep log phase compared to that of glucose medium. However, after 48h of cultivation, biomass and lipid accumulation in fructose medium outweighed the other. Volumetric DHA content in fructose medium at 96h was 11% higher than that of glucose medium. Overall, fructose was found to be a more suitable substrate for biomass, lipid and DHA accumulation in SW1 compared to the conventional source, glucose.

Matched MeSH terms: Fatty Acids, Omega-3

Two Elongases, Elovl4 and Elovl6, Fulfill the Elongation Routes of the LC-PUFA Biosynthesis Pathway in the Orange Mud Crab (Scylla olivacea)

Ting SY, Janaranjani M, Merosha P, Sam KK, Wong SC, Goh PT, et al.

J Agric Food Chem, 2020 Apr 08;68(14):4116-4130.

PMID: 32186869 DOI: 10.1021/acs.jafc.9b06692

While the capacity for long-chain polyunsaturated fatty acid (LC-PUFA) biosynthesis has been elucidated in vertebrates and several invertebrate phyla, the comparative knowledge in crustaceans remains vague. A key obstacle in mapping the full spectrum of LC-PUFA biosynthesis in crustacean is the limited evidence of the functional activities of enzymes involved in desaturation or elongation of polyunsaturated fatty acid substrates. In this present study, we report on the cloning and functional characterization of two Elovl elongases from the orange mud crab, Scylla olivacea. Sequence and phylogenetic analysis suggest these two Elovl as putative Elovl4 and Elovl6, respectively. Using the recombinant expression system in Saccharomyces cerevisiae, we demonstrate the elongation capacity for C18-C22 PUFA substrates in the S. olivacea Elovl4. The S. olivacea Elovl6 elongated saturated fatty acids, monounsaturated fatty acids, and interestingly, C18-C20 PUFA. Taken together, both Elovl fulfill the elongation steps required for conversion of C18 PUFA to their respective LC-PUFA products. Elovl4 is expressed mainly in the hepatopancreas and gill tissues, while Elovl6 is predominant in digestive tissues. The mRNA expression of both enzymes was higher in mud crabs fed with vegetable oil-based diets. Tissue fatty acid composition also showed the existence of LC-PUFA biosynthesis intermediate products in tissues expressing these two elongases. In summary, we report here two novel Elovl with PUFA elongating activities in a marine brachyuran. This will contribute significantly to the understanding of the LC-PUFA biosynthesis pathway in crustaceans and advance the development of aquafeed for intensive farming of the mud crab.

Matched MeSH terms: Fatty Acids, Unsaturated/biosynthesis*

Transdermal insulin delivery with microwave and fatty acids as permeation enhancers

Harjoh N, Wong TW, Caramella C

Int J Pharm, 2020 Jun 30;584:119416.

PMID: 32423875 DOI: 10.1016/j.ijpharm.2020.119416

Inhaled/oral insulin have been investigated as an alternative to injectable insulin, but are met with unsatisfactory outcomes. Transdermal administration bears several advantages unmet by inhalation/oral delivery, but macromolecular drugs permeation is poor. This study explored microwave to elicit transdermal insulin permeation, and compared against conventional permeation enhancers (fatty acids) in vitro/in vivo. The transdermal insulin permeation was promoted by microwave (2450 MHz/1 mW) > oleic acid (monounsaturated) ~ linoleic acid (double unsaturated bonds). The linolenic acid (triple unsaturated bonds) or combination of microwave/fatty acid reduced skin insulin permeation. Transdermal insulin permeation enhancement was attributed to epidermal lipid bilayer fluidization (CH) and corneocyte shrinkage due to keratin condensation (OH/NH, CO), which had aqueous pore enlarged to facilitate insulin transport. Its reduction by linolenic acid, a molecularly larger and rigid fatty acid with higher surface tension, was due to reduced fatty acid permeation into epidermis and minimal skin microstructural changes. The oleic acid, despite favoured skin microstructural changes, did not provide a remarkably high insulin permeation due to it embedded in skin as hydrophobic shield to insulin transport. Microwave penetrates skin volumetrically with no chemical residue retention. It alone promoted insulin absorption and sustained blood glucose level reduction in vivo.

Matched MeSH terms: Fatty Acids, Unsaturated/chemistry*

Fulltext Transcriptional activation of zebrafish fads2 promoter and its transient transgene expression in yolk syncytial layer of zebrafish embryos

Tay SS, Kuah MK, Shu-Chien AC

Sci Rep, 2018 03 01;8(1):3874.

PMID: 29497119 DOI: 10.1038/s41598-018-22157-4

The front-end desaturases (Fads) are rate-limiting enzymes responsible for production of long-chain polyunsaturated fatty acids (LC-PUFA). The full spectrum of the transcriptional regulation of fads is still incomplete, as cloning of fads promoter is limited to a few species. Here, we described the cloning and characterisation of the zebrafish fads2 promoter. Using 5'-deletion and mutation analysis on this promoter, we identified a specific region containing the sterol regulatory element (SRE) which is responsible for the activation of the fads2 promoter. In tandem, two conserved CCAAT boxes were also present adjacent to the SRE and mutation of either of these binding sites attenuates the transcriptional activation of the fads2 promoter. An in vivo analysis employing GFP reporter gene in transiently transfected zebrafish embryos showed that this 1754 bp upstream region of the fads2 gene specifically directs GFP expression in the yolk syncytial layer (YSL) region. This indicates a role for LC-PUFA in the transport of yolk lipids through this tissue layer. In conclusion, besides identifying novel core elements for transcriptional activation in zebrafish fads2 promoter, we also reveal a potential role for fads2 or LC-PUFA in YSL during development.

Matched MeSH terms: Fatty Acids/genetics; Fatty Acids/metabolism; Fatty Acids, Unsaturated/biosynthesis; Fatty Acids, Unsaturated/genetics

Fulltext Trans fatty acids in selected bakery products and its potential dietary exposure

Siti Nurshahbani, S., Azrina, A.

International Food Research Journal, 2014;21(6):2175-2181.

MyJurnal

High intake of trans fatty acids (TFA) may cause adverse changes in blood lipids as shown in many epidemiological studies. The major sources of TFA in human diet come from bakery products such as cookies, cakes, muffins, breads and pastries. In this study, total fat of baked products was determined using Soxhlet method while TFA content was determined on gas chromatograph using a highly polar capillary column and flame ionization detector. Exposure to TFA from the baked product was estimated based on Food Consumption Statistics of Malaysia 2003. High level of TFA was observed in muffins (3.21-7.34 g per 100 g food) followed by pastries (2.90-6.03 g per 100 g food) and cakes (2.26-8.36 g per 100 g food) regardless of products having brand name or not. Among the TFA isomers, trans 18:1 6t was the most abundant followed by trans 18:1 9t, trans 16:1 9t, trans 18:2 and small quantities of trans 18:1 11t. Exposure to TFA based on the Malaysian Food Consumption Statistics 2003 of the baked products was ranging from 0.14-0.18 g/day. Even with the low estimated exposure, actual intake of baked products must be monitored closely as other high fat food as these products is one of main contributor to TFA in the diet following their high frequency of daily intake.

Matched MeSH terms: Trans Fatty Acids

Fulltext Trans fatty acids content of biscuits commercially available in Malaysian market and comparison with other countries

International Food Research Journal, 2011;18(3):1097-1103.

MyJurnal

The fatty acid composition and trans fatty acid (TFA) contents of biscuits products were determined by gas chromatography, using a highly polar 100m capillary column (HP-88) and flame ionization detection. Total TFA ranged from 0.00 – 0.52 g/100 g total fatty acids and 0.12 – 0.68 g/100 g total fatty acids for local packed and unpacked biscuits, respectively. In imported biscuits, total TFA was higher ranging from 0.03 – 3.09 g/100 g of total fatty acids. Trans 16:1 was the most abundant, with values ranging from 0.01% to 38% followed by trans 18:1 Δ11 (0.01% - 13.11%), trans 18:1 Δ9 (0.01% - 4.68%), trans 18:2 (0.23% - 2.77%) and small quantities of trans 18:1 Δ6. CLA, the natural TFA constituted from 0.1% to

Matched MeSH terms: Fatty Acids; Trans Fatty Acids

Trans fatty acid content in Malaysian supermarket foods: a field-to-laboratory approach in assessing food risk

Karupaiah T, Tan HK, Ong WW, Tan CH, Sundram K

Food Addit Contam Part A Chem Anal Control Expo Risk Assess, 2014;31(8):1375-84.

PMID: 24872121 DOI: 10.1080/19440049.2014.929183

The extent of industrial trans fatty acids (TFA) in the food supply is unknown in Malaysia, whilst TFA disclosure on food labels is not mandatory by Malaysian food standards. Supermarket foods such as dairy products, fats and oils, meat products, snack foods, soups, and confectionery are commonly cited to be major contributors of TFA in the diet. A consumer survey (n = 622) was used to develop a food listing of these 'high risk' foods. TFA content of high-risk foods were analysed by gas chromatography. Food samples (n = 158) were analysed and their total TFA content were compared with Malaysian Food Standards. A wide variation in TFA content within food categories was indicated. Of the foods containing TFA, many food labels did not cite TFA content or the use of partially hydrogenated vegetable oils (PHVO) as an ingredient. Hypothesised estimates of TFA intake from these supermarket foods in a sample day's menu providing 2000 kcal projected a minimum intake of 0.5 g and a maximum intake of 5.2 g TFA. This study found there was no voluntary disclosure of TFA content on food labels or identifying PHVO as an ingredient. It appears that health education targeting consumers to minimise TFA consumption is required supported by mandatory PHVO disclosure on the food label.

Matched MeSH terms: Trans Fatty Acids/analysis*

Trans (elaidic) fatty acids adversely affect the lipoprotein profile relative to specific saturated fatty acids in humans

Sundram K, Ismail A, Hayes KC, Jeyamalar R, Pathmanathan R

J Nutr, 1997 Mar;127(3):514S-520S.

PMID: 9082038

Although dietary trans fatty acids can affect plasma lipoproteins negatively in humans, no direct comparison with specific saturated fatty acids has been reported, even though trans fatty acids were designed to replace saturates in foods and food processing. In this study, dietary trans 18:1 [elaidic acid at 5.5% energy (en)] was specifically exchanged for cis 18:1, 16:0 or 12:0 + 14:0 in 27 male and female subjects consuming moderate fat (31% en), low cholesterol (<225 mg/d) whole food diets during 4-wk diet periods in a crossover design. The trans-rich fat significantly elevated total cholesterol and LDL cholesterol relative to the 16:0-rich and 18:1-rich fats and uniquely depressed HDL cholesterol relative to all of the fats tested. Trans fatty acids also elevated lipoprotein (a) [Lp(a)] values relative to all dietary treatments. Furthermore, identical effects on lipoproteins were elicited by 16:0 and cis 18:1 in these subjects. The current results suggest that elaidic acid, one of the principal trans isomers produced during industrial hydrogenation of edible oils, adversely affects plasma lipoproteins. Thus, the negative effect of elaidic acid on the lipoprotein profile of humans appears to be unmatched by any other natural fatty acid(s).

Matched MeSH terms: Fatty Acids/administration & dosage; Fatty Acids/chemistry

Toxicity study on Clinacanthus nutans leaf hexane fraction using Danio rerio embryos

Murugesu S, Khatib A, Ahmed QU, Ibrahim Z, Uzir BF, Benchoula K, et al.

Toxicol Rep, 2019;6:1148-1154.

PMID: 31993329 DOI: 10.1016/j.toxrep.2019.10.020

Clinacanthus nutans, an herbal shrub belonging to the Acanthaceae family, is traditionally used as a functional food to treat various ailments in Malaysia and Indonesia. Although the polar fraction of this plant shows non-toxic effect, the toxicity of the non-polar extract is not reported so far. The present study aimed to assess the toxic effect and determine the lethal concentration of this non-polar fraction using zebrafish embryos. The n-hexane fraction was partitioned from the crude extract of C. nutans obtained using 80% methanolic solution. After spawning of the adult male and female zebrafish, the eggs were collected, transferred into a 96-well plate and incubated with the n-hexane fraction at concentrations of 15.63 μg/ml, 31.25 μg/ml, 62.5 μg/ml, 125 μg/ml, 250 μg/ml and 500 μg/ml in 2% DMSO. The survival and sublethal endpoint were assessed, the mortality and hatchability rates were calculated based on microscopic observation, while the heartbeat rate was measured using DanioScope software. The median lethal concentration (LC50) of the C. nutans n-hexane fraction, which was determined using probit analysis, was calculated to be 75.49 μg/mL, which is harmful. Moreover, gas chromatography-mass spectrometry (GC-MS) analysis revealed the presence of palmitic acid, phytol, hexadecanoic acid, 1-monopalmitin, stigmast-5-ene, pentadecanoic acid, heptadecanoic acid, 1-linolenoylglycerol and stigmasterol in the n-hexane fraction.

Matched MeSH terms: Fatty Acids

Fulltext Towards an alcohol-free process for the production of palm phytonutrients via enzymatic hydrolysis of crude palm oil using liquid lipases

Adiiba SH, Chan ES, Lee YY, Amelia, Chang MY, Song CP

J Sci Food Agric, 2022 Dec;102(15):6921-6929.

PMID: 35662022 DOI: 10.1002/jsfa.12053

BACKGROUND: Crude palm oil (CPO) is rich with phytonutrients such as carotenoids and tocols which possesses many health benefits. The aim of this research was to develop a methanol-free process to produce palm phytonutrients via enzymatic hydrolysis. In this work, triacylglycerol was hydrolyzed into free fatty acids (FFAs) using three different types of liquid lipases derived from Aspergillus oryzae (ET 2.0), Aspergillus niger (Habio) and Candida antartica (CALB).

RESULTS: ET 2.0 was found to be the best enzyme for hydrolysis. Under the optimum condition, the FFA content achievable was 790 g kg-1 after 24 h of reaction with 1:1 water-to-oil mass ratio at 50 °C and stirring speed of 9 × g. Furthermore, with the addition of 2 g kg-1 ascorbic acid, it was found that 98% of carotenoids and 96% of tocols could be retained after hydrolysis.

CONCLUSION: This work shows that enzymatic hydrolysis, which is inherently safer, cleaner and sustainable is feasible to replace the conventional methanolysis for the production of palm phytonutrients. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Matched MeSH terms: Fatty Acids, Nonesterified

Topical application of omega-3-, omega-6-, and omega-9-rich oil emulsions for cutaneous wound healing in rats

Ishak WMW, Katas H, Yuen NP, Abdullah MA, Zulfakar MH

Drug Deliv Transl Res, 2019 04;9(2):418-433.

PMID: 29667150 DOI: 10.1007/s13346-018-0522-8

Wound healing is a physiological event that generates reconstitution and restoration of granulation tissue that ends with scar formation. As omega fatty acids are part of membrane phospholipids and participate in the inflammatory response, we investigated the effects of omega-3, omega-6, and omega-9 fatty acids in the form of oils on wound healing. Linseed (LO), evening primrose (EPO), and olive oils (OO) rich in omega-3, omega-6, and omega-9 fatty acids were formulated into emulsions and were topically applied on rats with excision wounds. All omega-3-, omega-6-, and omega-9-rich oil formulations were found to accelerate wound closure compared to untreated, with significant improvement (p

Matched MeSH terms: Fatty Acids/administration & dosage*

Fulltext Tolerance of Tetraselmis tetrathele to High Ammonium Nitrogen and Its Effect on Growth Rate, Carotenoid, and Fatty Acids Productivity

Farahin AW, Natrah I, Nagao N, Yusoff FM, Shariff M, Banerjee S, et al.

Front Bioeng Biotechnol, 2021;9:568776.

PMID: 33585428 DOI: 10.3389/fbioe.2021.568776

Microalgae can use either ammonium or nitrate for its growth and vitality. However, at a certain level of concentration, ammonium nitrogen exhibits toxicity which consequently can inhibit microalgae productivity. Therefore, this study is aimed to investigate the tolerance of Tetraselmis tetrathele to high ammonium nitrogen concentrations and its effects on growth rate, photosynthetic efficiency (F
v
/F
m
), pigment contents (chlorophyll a, lutein, neoxanthin, and β-carotene), and fatty acids production. Experiments were performed at different ammonium nitrogen concentrations (0.31-0.87 gL-1) for 6 days under a light source with an intensity of 300 μmol photons m-2 s-1 and nitrate-nitrogen source as the experimental control. The findings indicated no apparent enhancement of photosynthetic efficiency (Fv/Fm) at high levels of ammonium nitrogen (

NH

4

+

-N) for T. tetrathele within 24 h. However, after 24 h, the photosynthetic efficiency of T. tetrathele increased significantly (p < 0.05) in high concentration of

NH

4

+

-N. Chlorophyll a content in T. tetrathele grown in all of the different

NH

4

+

-N levels increased significantly compared to nitrate-nitrogen (NO3-N) treatment (p < 0.05); which supported that this microalgal could grow even in high level of

NH

4

+

-N concentrations. The findings also indicated that T. tetrathele is highly resistant to high ammonium nitrogen which suggests T. tetrathele to be used in the aquaculture industry for bioremediation purpose to remove ammonium nitrogen, thus reducing the production cost while improving the water quality.

Matched MeSH terms: Fatty Acids

Three stage cultivation process of facultative strain of Chlorella sorokiniana for treating dairy farm effluent and lipid enhancement

Hena S, Fatihah N, Tabassum S, Ismail N

Water Res, 2015 Sep 1;80:346-56.

PMID: 26043271 DOI: 10.1016/j.watres.2015.05.001

Reserve lipids of microalgae are promising for biodiesel production. However, economically feasible and sustainable energy production from microalgae requires optimization of cultivation conditions for both biomass yield and lipid production of microalgae. Biomass yield and lipid production in microalgae are a contradictory problem because required conditions for both targets are different. Simultaneously, the mass cultivation of microalgae for biofuel production also depends extremely on the performance of the microalgae strains used. In this study a green unicellular microalgae Chlorella sorokiniana (DS6) isolated from the holding tanks of farm wastewater treatment plant using multi-step screening and acclimation procedures was found high-lipid producing facultative heterotrophic microalgae strain capable of growing on dairy farm effluent (DFE) for biodiesel feedstock and wastewater treatment. Morphological features and the phylogenetic analysis for the 18S rRNA identified the isolated strains. A novel three stage cultivation process of facultative strain of C. sorokiniana was examined for lipid production.

Matched MeSH terms: Fatty Acids/analysis; Fatty Acids/metabolism

Fulltext Thermal Performance Study of Composite Phase Change Material with Polyacrylicand Conformal Coating

Kee SY, Munusamy Y, Ong KS, Cornelis Metselaar HS, Chee SY, Lai KC

Materials (Basel), 2017 Jul 28;10(8).

PMID: 28773232 DOI: 10.3390/ma10080873

The composite PCM was prepared by blending polymethyl methacrylate (PMMA) and myristic acid (MA) in different weight percentages. The MA and PMMA were selected as PCM and supporting material, respectively. As liquid MA may leak out during the phase transition, this study proposes the use of two coatings, namely a polyacrylic coating and a conformal coating to overcome the leakage problem. Both coatings were studied in terms of the leakage test, chemical compatibility, thermal stability, morphology, and reliability. No leakage was found in the PCMs with coatings compared to those without under the same proportions of MA/PMMA, thus justifying the use of coatings in the present study. The chemically compatibility was confirmed by FTIR spectra: the functional groups of PCMs were in accordance with those of coatings. DSC showed that the coatings did not significantly change the melting and freezing temperatures, however, they improved the thermal stability of composite PCMs as seen in TGA analysis. Furthermore, the composite PCMs demonstrated good thermal reliability after 1000 times thermal cycling. The latent heat of melting reduced by only 0.16% and 1.02% for the PCMs coated with conformal coating and polyacrylic coating, respectively. Therefore, the proposed coatings can be considered in preparing fatty acid/PMMA blends attributed to the good stability, compatibility and leakage prevention.

Matched MeSH terms: Fatty Acids

Fulltext Therapeutic potential of the haruan (Channa striatus): from food to medicinal uses

Mohd SM, Abdul Manan MJ

Malays J Nutr, 2012 Apr;18(1):125-36.

PMID: 23713236 MyJurnal

The haruan (Channa striatus) is an indigenous, predatory freshwater fish of Malaysia. It is a common food fish among the local populace with traditionally identified pharmacological benefits in treating wound and pain and in boosting energy of the sick. Channa striatus is also a subject of renewed interest in Malaysian folk medicine in the search for a better cure for diseases and ailments. Amino acids and fatty acids, found in high concentrations in the fish, might have contributed to its pharmacological properties. Important amino acids of the fish include glycine, lysine and arginine, while its fatty acids are arachidonic acid, palmitic acid and docosahexaenoic acid. They appear to effect their influence through the formation of several types of bioactive molecules. Extracts of the fish are produced from whole fish, roe, mucus and skin of the fish. This review updates research findings on potential uses of Channa striatus, beyond the traditional prescription as a wound healer, pain reliever and energy booster to include its properties as a ACE-inhibitor, anti-depressant and neuroregenerative agent. The fish appears to have wide-ranging medical uses and should be studied more intensively to unearth its other properties and mechanisms of action.

Matched MeSH terms: Fatty Acids/analysis

Fulltext The use of D-optimal mixture design in optimising okara soap formulation for stratum corneum application

Borhan FP, Abd Gani SS, Shamsuddin R

ScientificWorldJournal, 2014;2014:173979.

PMID: 25548777 DOI: 10.1155/2014/173979

Okara, soybean waste from tofu and soymilk production, was utilised as a natural antioxidant in soap formulation for stratum corneum application. D-optimal mixture design was employed to investigate the influence of the main compositions of okara soap containing different fatty acid and oils (virgin coconut oil A (24-28% w/w), olive oil B (15-20% w/w), palm oil C (6-10% w/w), castor oil D (15-20% w/w), cocoa butter E (6-10% w/w), and okara F (2-7% w/w)) by saponification process on the response hardness of the soap. The experimental data were utilized to carry out analysis of variance (ANOVA) and to develop a polynomial regression model for okara soap hardness in terms of the six design factors considered in this study. Results revealed that the best mixture was the formulation that included 26.537% A, 19.999% B, 9.998% C, 16.241% D, 7.633% E, and 7.000% F. The results proved that the difference in the level of fatty acid and oils in the formulation significantly affects the hardness of soap. Depending on the desirable level of those six variables, creation of okara based soap with desirable properties better than those of commercial ones is possible.

Matched MeSH terms: Fatty Acids/analysis

Fulltext The trans fatty acids content of selected foods in Malaysia

Akmar ZD, Norhaizan ME, Azimah R, Azrina A, Chan YM

Malays J Nutr, 2013 Apr;19(1):87-98.

PMID: 24800387 MyJurnal

INTRODUCTION: There is a lack of information on the trans fatty acid (TFA) content in Malaysian foods. The objective of this study is to determine the TFA content of bakery products, snacks, dairy products, fast foods, cooking oils and semisolid fats, and breakfast cereals and Malaysian fast foods. This study also estimated the quantity of each isomer in the foods assayed.
METHODS: The trans fatty acid content of each food sample was assessed in duplicate by separating the fatty acid methyl esters (FAME) in a gas chromatography system equipped with HP-88 column (USA: split ratio 10: 1) for cis/trans separation. Five major TFA isomers, palmitoelaidic acid (16: 1t9), petroselaidic acid (18:1t6), elaidic acid (18:1t9), vaccenic acid (18: 1t11) and linoelaidic acid (18:2t9, 12), were measured using gas chromatography (GC) and the data were expressed in unit values of g/100 g lipid or g/100 g food.
RESULTS: The total TFA contents in the studied foods were < 0.001 g-8.77 g/100 g lipid or < 0.001 g-5.79 g/100 g foods. This value falls within the standard and international recommendation level for TFA. The measured range of specific TFA isomers were as follows: palmitoelaidic acid (< 0.001 g-0.26 g/100 g lipid), petroselaidic acid (< 0.001 g - 3.09 g/100 g lipid), elaidic acid (< 0.001 g-0.87 g/100 g lipid), vaccenic acid (< 0.001 g-0.41 g/100 g lipid) and linoelaidic acid (< 0.001 g-6.60 g/100 g lipid).
CONCLUSION: These data indicate that most of the tested foods have low TFA contents (< 1 g/100 g lipid).

Matched MeSH terms: Trans Fatty Acids/analysis*

Displaying publications 21 - 40 of 701 in total