The physico-mechanical properties data of fruits are important in the design of various handling, packing, and storage and transportation system. The physical-mechanical properties of pineapple fruit from the Josapine variety, namely the weight of the fruit (with and without peel), pulp to peel ratio, diameter of the whole fruit (with and without peel), at three different positions along the longitudinal axis of the fruit, length of the fruit (with and without peel) and the length of crown were studied using the standard method at seven stages of maturity during storage at 25°C and 52% (RH). The effect of fruit maturity on the firmness of each fruit at three different locations was measured using a cylindrical die of 6 mm in diameter with the Instron Universal Testing Machine. The results indicated that the average total weight of a single fruit is 886.86 ± 49.67 g. The average pulp to peel ratio is 1.91. The average diameter (with and without peel) was 86.83 ± 5.24 mm and 80.95 ± 4.15 mm (top section), 100.77 ± 3.84 mm and 90.19 ± 3.73 mm (middle section) and 97.17 ± 3.49 mm and 73.30 ± 5.11 mm (bottom section), respectively. The average length of the fruit (with and without peel) was 126.65 mm and 113.64 mm, respectively. The average length of crown was 89.13 mm. The firmness of the fruits was found to decrease with the stage of maturity. These data are important in determining the optimum stage of maturity for fruit processing.
To assess the effect of dietary ascorbate on lipid metabolism, 1-year black sea bream (Acanthopagrus schlegelii) were reared on a casein-based purified diet and an ascorbate fortified diet (1,100 mg of L: -ascorbyl-2- monophosphate-Mg/kg diet). The fortified ascorbate was effectively incorporated into the fish body and elevated muscle carnitine content. Fortifications of dietary ascorbate depressed activities of glucose-6-phosphate dehydrogenase and NADP-isocitrate dehydrogenase as lipogenic enzymes in the hepatopancreas and intraperitoneal fat body. Starvation after feeding experiment activated carnitine palmitoyltransferase as a lipolysis enzyme in the hepatopancreas in both control and vitamin C(VC) groups, while the lipolysis activity was significantly higher in VC group. These results confirmed that dietary ascorbate depressed lipogenesis and activated lipolysis, i.e., influenced the lipid metabolism of black sea bream.
An attempt was made in this investigation to trace the dynamic response of roller compacted concrete dam, which is subjected to horizontal ground motion by considering the interactions between flexible foundations, reservoir water, and bottom reservoir sediments. Two-dimensional finiteinfinite element was used for the non-linear elasto-plastic dynamic analysis. In this analysis, special emphasis was given to the non-linear behaviour of discontinuities along RCC dam-bedding rock foundation which was modelled by thin layer interface. Analysis was first carried out under static loading (self-weight and hydrostatic pressure), and this this was followed by seismic analysis, with hydrodynamic pressure effect in a dam-reservoir system. Based on the numerical dynamic results, it is concluded that the bottom reservoir sediment has significant effect on the seismic response of the RCC gravity dam. Moreover, there is a redistribution of the stresses at thin layer interface with significant stresses reduction, which is resulted from the release of energy through different modes of deformation in this region.
BACKGROUND: Osteoporotic fracture is a major health burden. Early diagnosis and management would improve the quality of life and reduce costs to the society.
OBJECTIVE: We aimed to identify risk factors associated with osteoporosis followed by development and validation of a screening tool in the hope of providing an appropriate regime to detect low bone density (BMD) in Malaysia.
METHODOLOGY: Between November 1999 and November 2002, 514 healthy women aged ≥ 45 with intact uterus, non-HRT users were recruited. Following BMD testing, a screening tool was developed. For validation, 72 women were recruited from June 2003 to December 2003.
RESULTS: Age and a longer duration postmenopause were negatively linked to BMD. Higher family income, BMI, waist and hip circumference were positively correlated. A score of ≥ 4, the screening tool had a sensitivity of 73.2%, a specificity of 61.6% for identifying women with low BMD (T score ≤ -2) plus a sensitivity of 80.2% in selecting women with osteoporosis. The tool enabled a 45.9% reduction in unnecessary DEXA testing. Validation of the screening tool showed a negative predictive value of 97.8%, sensitivity and specificity of 87.5% and 70.3%, respectively.
CONCLUSION: The Malaysian Osteoporosis Screening Tool (MOST) is relatively simple. Its usage may reduce unnecessary DEXA test.
Paper recycling plants usually buy their raw material from suppliers. More than often, bulk used paper supplied to the plant contains some significant quantity of water in its internal voids. It may be included intentionally or unintentionally. The price of used paper depends on its weight, thus adding water will help to increase weight and consequently increase the price. In this way, plant owner who purchase the used paper suffers a significant of financial lost. The objectives of our experiment are to establish a calibration curve that correlate between the amount of neutron backscattered and water content, and finally to develop a correction factor that need to be introduced to the measured values of water content. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector were used for water measurement. The experiments were carried out by measuring neutron backscattering from used paper that has been added with different amount of water. As a result, a neutron calibration curve that provides a correlation between neutron backscattering and water content was established.
Anochetus maryatiae, a new species of Formicidae from the subfamily Ponerinae, tribe Ponerini from Ulu Gombak is described and illustrated. This ant genus was last studied in Malaysia by Brown in 1978. Observations were made on morphometric characters which included parameter measurements of total length, head length, head width, mandible length, scape length, antenna length, maximum eye length, oculomandibular distance, funicular length segment 1 to 4, pronotum width, propodeum height, petiole length, petiole height, dorsal petiole width, cephalix index and mandibular index. It was followed by a brief diagnosis, description of morphological structure, microsculpture, pilosity and discussion. Although it has resemblance with Anochetus tua, it could be easily distinguished from other species in having reticulate pronotum. This is the only species from Malaysia with such microsculpture on the pronotum. In addition to that, A. maryatie varies with A. tua in having smaller total length, less than 7.5 mm and lighter colour.
Accurate values are a must in medicine. An important parameter in determining the quality of a medical instrument is agreement with a gold standard. Various statistical methods have been used to test for agreement. Some of these methods have been shown to be inappropriate. This can result in misleading conclusions about the validity of an instrument. The Bland-Altman method is the most popular method judging by the many citations of the article proposing this method. However, the number of citations does not necessarily mean that this method has been applied in agreement research. No previous study has been conducted to look into this. This is the first systematic review to identify statistical methods used to test for agreement of medical instruments. The proportion of various statistical methods found in this review will also reflect the proportion of medical instruments that have been validated using those particular methods in current clinical practice.
Matched MeSH terms: Weights and Measures/instrumentation; Weights and Measures/standards
Research on joint torque reduction in robot manipulators has received considerable attention in recent years. Minimizing the computational complexity of torque optimization and the ability to calculate the magnitude of the joint torque accurately will result in a safe operation without overloading the joint actuators. This paper presents a mechanical design for a three dimensional planar redundant manipulator with the advantage of the reduction in the number of motors needed to control the joint angle, leading to a decrease in the weight of the manipulator. Many efforts have been focused on decreasing the weight of manipulators, such as using lightweight joints design or setting the actuators at the base of the manipulator and using tendons for the transmission of power to these joints. By using the design of this paper, only three motors are needed to control any n degrees of freedom in a three dimensional planar redundant manipulator instead of n motors. Therefore this design is very effective to decrease the weight of the manipulator as well as the number of motors needed to control the manipulator. In this paper, the torque of all the joints are calculated for the proposed manipulator (with three motors) and the conventional three dimensional planar manipulator (with one motor for each degree of freedom) to show the effectiveness of the proposed manipulator for decreasing the weight of the manipulator and minimizing driving joint torques.
This paper presents an anthropometric database of high school and university students from Kuala Lumpur, Malaysia. Forty-one high school participants (21 males and 20 females), 13-17 years old, and 143 university students (74 males and 69 females) took part in the study. Twenty-one static body dimensions were measured. The greatest mean differences in the anthropometric data between male and female high school students were found in the sitting elbow height. In addition, a comparison of anthropometric data of male and female university students showed that data for males and females were significantly different, except for buttock-popliteal length, sitting elbow height and thigh clearance. The primary aim of this study was to develop an anthropometric database that could be used as a primary reference in designing products, devices and equipment for ergonomic learning environments.
Logistic regression was applied to develop a morphometric sexing method of two closely related stork species that were previously sexed through amplification of the CHD gene. Tarsus length (TL) and bill length (BL) measurements were recorded from captive populations of adult Milky Stork (Mycteria cinerea) (n = 60) and Painted Stork (Mycteria leucocephala) (n = 58) at Zoo Negara Malaysia. Despite having monomorphic plumages, both stork species exhibited normal sexual size dimorphism in which males were significantly larger than females in the tested variables. Based on logistic regression analysis, BL correctly classified the sex of sampled individuals from Painted and Milky stork with an overall predicted accuracy of 94.8 and 90.0%, respectively. However, TL measurements generated a lower predicted accuracy level of 86.2% and a same accuracy level of 90% on the sex classification of individuals from Painted and Milky stork, respectively. By comparing the measurements of both species, only the average BL measurements of the Milky storks were significantly lower than that of Painted storks (t-test, P80.001). The logistic regression equation in this study may serve as a simple and more practical option for sexing Milky and Painted storks for their breeding and conservation programmes.
Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.
Kenaf fibre that is known as Hibiscus cannabinus, L. family Malvaceae is an herbaceous plant that can be grown under a wide range of weather conditions. The uses of kenaf fibres as a reinforcement material in the polymeric matrix have been widely investigated. It is known that epoxy has a disadvantage of brittleness and exhibits low toughness. In this research, liquid epoxidized natural rubber (LENR) was introduced to the epoxy to increase its toughness. Kenaf fibres, with five different fibre loadings of 5%, 10%, 15%, 20% and 25% by weight, were used to reinforce the epoxy resins (with and without addition of epoxidized natural rubber) as the matrices. The flexural strength, flexural modulus and fracture toughness of the rubber toughened epoxy reinforced kenaf fibre composites were investigated. The results showed that the addition of liquid epoxidized natural rubber (LENR) had improved the flexural modulus, flexural strength and fracture toughness by 48%, 30%, and 1.15% respectively at 20% fibre loading. The fractured surfaces of these composites were investigated by using scanning electron microscopic (SEM) technique to determine the interfacial bonding between the matrix and the fibre reinforcement.
A series of ester compounds derived from ricinoleic acid to be used as biolubricants base stock have been synthesized. The resulting products were confirmed by FTIR and NMR analyses. The synthesis was carried out in three stages: epoxidation of ricinoleic acid; synthesis of 10,12-dihydroxy-9-acyloxystearic acid from epoxidized ricinoleic acid with various fatty acids and esterification of the acyloxystearic acid products with octanol to yield octyl-10,12-dihydroxy-9-acyloxystearate. The viscosities, flash points and pour points (PP) behavior of the products were measured. The resulting esters had an increased in molar weight and viscosity and decreased in pour points as compared to ricinoleic acid.
In hilly forest area, aligning forest roads is the key towards an effective and sustainable forest management. Constraints in forest road planning are mainly due to environmental factors and topographical conditions. Selecting the criteria for planning forest road and setting the priorities, ranking them for environmental sustainability and reduce cost in road construction is important. Different criteria are required at different forest area since the quantifiable relationship between cause and effect to meet the goal are not comprehensively prioritized. In order to solve the problem, the relative importance factor from multi criteria basis, namely Analytic Hierarchy Process (AHP) was applied. Therefore, the objective of this study was to develop priorities and rank a selected criterion for planning forest road in hilly area using AHP approach. Four criteria had been identified to meet the goal of suitable forest road allocation namely slope, river crossing, elevation and existing forest road. The suitable criteria selected were sorted with weight in ranking order to minimize the impact of timber harvesting. Our results showed that the priorities and ranking were as follows; slope (w = 0.558), followed by river crossing (w = 0.303), elevation (w = 0.095) and lastly existing forest road (w = 0.044), respectively. Therefore, the relative preference factor developed in this study can be used by the Forestry Department for formulating suitable forest road allocation in hilly area simultaneously to be integrated with geographic information system technology.
Although the association between non-alcoholic fatty liver disease (NAFLD) and metabolic syndrome has been previously firmly established, the prevalence of NAFLD and its risk factors in rural communities remains incompletely defined. This study aimed to determine the prevalence and factors associated with ultrasound-diagnosed NAFLD amongst a rural community in Sarawak. An indigenous village was randomly selected where all adults aged 21 years and above underwent an abdominal ultrasound, biochemical tests and an anthropometric assessment. Respondents with a score > or =8 on an alcohol-use disorders-identification test (AUDIT) indicating harmful or hazardous drinking were excluded. Seventy-seven respondents (46.8% male, mean age 48.4 SD 16.64), met inclusion criteria. The prevalence of ultrasound diagnosed NAFLD was 44.2% (n=34), among them 52.9% had moderate NAFLD. There were no significant age or gender differences between respondents with and without NAFLD, although those with NAFLD were older. Respondents with NAFLD had a significantly higher BMI t,han those without NAFLD (p<0.001). Both male and female respondents with NAFLD had a significantly higher waist circumference than those without NAFLD (p<0.001). Prevalence of diabetes, hypertension, hyperglycemia and hypertriglyceridemia were significantly higher among those with NAFLD. However, there were no significant differences in terms of percentage of unhealthy body fat and muscle, and serum HDL levels. Risk factors independently associated with NAFLD included male gender (odd ratio 0.06; 95% CI 0.008-0.523) and waist circumference (odd ratio 1.2; 95% CI 1.036-1.421). There was a high prevalence of NAFLD and the presence of more severe stages of disease in this indigenous population. Life-style related diseases, such as fatty liver disease, can occur in rural as well as urban populations.
A twelve-week controlled intervention trial was carried out to evaluate the effects of combined physical activity and dietary intervention on obesity and metabolic risk factors among employees of Universiti Putra Malaysia. Participants consisted of adults aged 25-55 years with no reported chronic diseases but with abdominal obesity. They were assigned to either a combined physical activity and dietary intervention group or a control group. The final sample consisted of 56 participants, with an equal number of 28 for each study group. No significant group effect was observed for any variable except for hip circumference (HC) and fasting plasma glucose (FPG). There was a significant increase in HC (p=0.007) and reduction in FPG (p=0.02) in the intervention group compared to the control group. In the intervention group, HC (p=0.002), triglycerides (TG) (p=0.0001), total cholesterol (TC) (p=0.0001), LDL cholesterol (LDLC) (p=0.0001) and FPG (p=0.005) were significantly reduced, while waist circumference (WC) (p=0.025) and the waist-to-hip ratio (WHR) (p=0.027) were significantly reduced in the control group. No significant change in steps/day or calorie intake'was observed in either group. Taken together, these data indicate that the combined physical activity and dietary intervention was not effective at improving diet or physical activity level. However, the intervention was effective in improving FPG among participants with abdominal obesity. The significant increase in HC in the interventions group warrants further study. These findings will be useful to further improve group-based intervention for the prevention and management of obesity.
Composite archery bows have been well known and used by Asiatic societies for thousands of years. The Turkish composite bow, made of wood, horn, sinew and glue is one of the most famous and powerful bows in the world. Because of its high draw weight and mechanical efficiency, the Turkish composite bow became a powerful weapon in the Seljuk and the Ottoman empire. In addition to being a powerful weapon of war, at the same time the bow and arrow (archery) continued
to be a sport of Ottoman (sultans, state officials, janissaries) until the late Ottoman period. In this study of the Ottoman composite archery bows in the collections of Izmir Ethnography Museum, a small wood sample was investigated on the basis of its wood anatomy. The results showed that it was made of maple wood (Acer sp.) and some of its qualitative and quantitative anatomical properties are presented here. One of the key properties for the identification of maple wood is
the helical thickening throughout the body of the vessel element. Helical thickenings in vessel elements in cutting surfaces of maple-wooden core increase the bonding surface between the wood and sinew-horn. In most of the woods preferred traditionally for bow-making, helical thickenings in tracheids, vessel elements or ground tissue fibres should be taken into account at a hierarchy of cellular structures for elucidating the efficiency of Ottoman composite-wooden bow.
The objectives of this study were to investigate whether severity of clubfoot, age, and weight of the patients at initial manipulation and casting influence the total number of castings required.
Some diseases may underlie finger clubbing. However, there is a dearth of information about early stage of finger clubbing because only few researchers have shown interest in it. We determined the Digital Index of normal, healthy subjects by using thread and manual Vernier calipers, the time used for the procedure, and its interrater reliability. The value of Digital Index was 8.86 ± 0.29 (Mean ± SD) with a range of 8.15 to 9.41. Interrater reliability was excellent with Pearson's correlation coefficient of 0.966. Overall, the time taken to measure the Digital Index ranged from 21.93 to 68.80 minutes with an average of 35.97 ± 9.16 (Mean ± SD). Determining Digital Index need much time, but this can be overcome if we use Digital Index Quantitator (DIQ). Availability of DIQ in the hospital wards will be of much benefit. DIQ can also be used to accurately quantify the progression or regression of the clubbing process. This article proves that we need morphometry of digital clubbing as well as the correlation of the physical sign of clubbing with Digital Index.
Enhanced muscle strength is seen when resistance exercise is combined with the consumption of nutritional supplements. Although there is a limited number of studies available about the efficacy of gamma oryzanol supplementation with resistance exercise in humans, but its usage as a nutritional supplement for strength is common in athletes. The aim of this study was to determine the effects of gamma oryzanol supplementation during 9-week resistance training on muscular strength and anthropometric measurements of young healthy males.