Displaying publications 21 - 40 of 279 in total

Abstract:
Sort:
  1. Islam MA, Sundaraj K, Ahmad RB, Sundaraj S, Ahamed NU, Ali MA
    PLoS One, 2014;9(8):e104280.
    PMID: 25090008 DOI: 10.1371/journal.pone.0104280
    In mechanomyography (MMG), crosstalk refers to the contamination of the signal from the muscle of interest by the signal from another muscle or muscle group that is in close proximity.
    Matched MeSH terms: Range of Motion, Articular/physiology
  2. Ali Md Nadzalan
    MyJurnal
    This study was conducted to investigate i) while the shoulder was in 180° of flexion and the elbow extended, which of the forearm position (supination, pronation and neutral) can generate the greatest handgrip strength, ii) is there any correlation of the handgrip strength between the dominant hand (right hand) and non-dominant hand (left hand) in each forearm position, and iii) will the dominant hand possessed 10% higher handgrip strength than the non-dominant hand. 100 right handed sedentary active students age 22.20 years old (± 1.03), height 172.83 cm (± 6.37), body mass 68.87 (± 11.52) and grip position 3.77 (± 0.77) were recruited in this study. The result indicated that for both the dominant and non-dominant hand, when the shoulder is in 180˚ flexion of the body with the elbow extended, the greatest grip strength was obtained when the forearm was in neutral position followed by pronation and supination position. Post Hoc analysis showed that for both dominant hand and non-dominant hand, pronation and supination forearm position produced greater strength score compared to supination forearm position (p0.05). In all forearm position, participants were shown to produced significantly greater strength in their dominant hand and all the scores were more than 10% greater compared to when using non-dominant hand. Positive relationships were also found for the strength score between dominant hand and non-dominant hand. As the conclusion, different shoulder, elbow and forearm position can affect handgrip strength.
    Matched MeSH terms: Range of Motion, Articular
  3. Bashaireh KM, Yabroudi MA, Nawasreh ZH, Al-Zyoud SM, Bashir NB, Aleshawi AJ, et al.
    Knee, 2020 Aug;27(4):1205-1211.
    PMID: 32711883 DOI: 10.1016/j.knee.2020.05.003
    BACKGROUND: A high incidence of joint laxity has been reported among Asians compared with Western populations, but clear differences between more specific ethnic populations have not been established. This study aimed to determine the average knee laxity in the Malaysian and Jordanian populations.

    METHODS: Jordanian and Malaysian medical students from our institution were invited to participate in the study. General demographic data and factors affecting joint laxity were obtained from each participant using a printed questionnaire. Both knees were examined using the anterior drawer test while in 90° of flexion. Knee laxity was measured by three separate independent investigators through a knee laxity tester.

    RESULTS: One hundred and eighty-six participants (95 females) were enrolled in the study. Among them, 108 Malaysians participated. The Jordanians had significantly higher knee laxity in both knees compared with the Malaysians. The mean average right knee laxity for Jordanians was 2.98 mm vs. 2.72 mm for Malaysians (P = 0.005). Similarly, the mean average left knee laxity for Jordanians was 2.95 mm, while for Malaysians, it was 2.62 mm (P = 0.0001). Furthermore, smokers had significantly more laxity in both knees. After performing a multivariate linear regression analysis for all factors, race was the only independent factor that affected knee laxity in both knees.

    CONCLUSIONS: Race is directly associated with knee laxity. Jordanians tend to have more laxity in knee joints compared with Malaysians. Larger multi-center and genetic studies are recommended to establish the racial differences between different ethnic groups.

    Matched MeSH terms: Range of Motion, Articular/physiology*
  4. Kondo E, Merican AM, Yasuda K, Amis AA
    Arthroscopy, 2014 Mar;30(3):335-43.
    PMID: 24581258 DOI: 10.1016/j.arthro.2013.12.003
    The purpose of this study was to clarify the changes in the kinematics of the knee that result from isolated deficiency of the anteromedial (AM) or posterolateral (PL) bundle.
    Matched MeSH terms: Range of Motion, Articular
  5. Merican AM, Ghosh KM, Baena FR, Deehan DJ, Amis AA
    Knee Surg Sports Traumatol Arthrosc, 2014 Mar;22(3):526-33.
    PMID: 23271038 DOI: 10.1007/s00167-012-2312-z
    PURPOSE: To study the effect of increasing patellar thickness (overstuffing) on patellofemoral kinematics in total knee arthroplasty and whether subsequent lateral retinacular release would restore the change in kinematics.

    METHODS: The quadriceps of eight fresh-frozen knees were loaded on a custom-made jig. Kinematic data were recorded using an optical tracking device for the native knee, following total knee arthroplasty (TKA), then with patellar thicknesses from -2 to +4 mm, during knee extension motion. Staged lateral retinacular releases were performed to examine the restoration of normal patellar kinematics.

    RESULTS: Compared to the native knee, TKA led to significant changes in patellofemoral kinematics, with significant increases in lateral shift, tilt and rotation. When patellar composite thickness was increased, the patella tilted further laterally. Lateral release partly corrected this lateral tilt but caused abnormal tibial external rotation. With complete release of the lateral retinaculum and capsule, the patella with an increased thickness of 4 mm remained more laterally tilted compared to the TKA with normal patellar thickness between 45° and 55° knee flexion and from 75° onwards. This was on average by 2.4° ± 2.9° (p 

    Matched MeSH terms: Range of Motion, Articular
  6. Muhammad Khairul Anuar Mohamed, Nor Aida Zuraimi Md Noar, Mohd Zuki Salleh, Anuar Ishak
    Sains Malaysiana, 2016;45:189-296.
    In this paper, the problem of free convection boundary layer flow on a horizontal circular cylinder in a nanofluid with viscous dissipation and constant wall temperature is investigated. The transformed boundary layer equations are solved numerically using finite difference scheme namely the Keller-box method. Numerical solutions were obtained for the reduced skin friction coefficient, Nusselt number and Sherwood number as well as the velocity and temperature profiles.The features of the flow and heat transfer characteristics for various values of the Brownian motion parameter, thermophoresis parameter, Lewis number and Eckert number were analyzed and discussed.
    Matched MeSH terms: Motion
  7. Tang, S.H., Khaksar, W., Ismail, N.B., Ariffin, M.K.A.
    MyJurnal
    The ability of a robot to plan its own motion seems pivotal to its autonomy, and that is why the motion planning has become part and parcel of modern intelligent robotics. In this paper, about 100 research are reviewed and briefly described to identify and classify the amount of the existing work for each motion planning approach. Meanwhile, around 200 research were used to determine the percentage of the application of each approach. The paper includes comparative tables and charts showing the application frequency of each approach in the last 30 years. Finally, some open areas and challenging topics are presented based on the reviewed papers.
    Matched MeSH terms: Motion
  8. Keller M, Kastenberger T, Anoar AF, Kaiser P, Schmidle G, Gabl M, et al.
    Arch Orthop Trauma Surg, 2020 Jun;140(6):835-842.
    PMID: 32124031 DOI: 10.1007/s00402-020-03386-7
    INTRODUCTION: This study evaluated the use of a free vascularized bone graft with and without cartilage from the medial femoral condyle (MFC) in patients with recalcitrant scaphoid non-union, with a special focus on union rates and the osteochondral graft for proximal pole destruction.

    MATERIALS AND METHODS: Thirty-eight avascular scaphoid non-unions in 37 patients who were treated with a free osteoperiosteal or osteochondral MFC graft were retrospectively evaluated (mean follow-up 16 months). Bone union, the scapholunate and the radiolunate angles were evaluated on X-ray images. The range of motion, grip strength, VAS, DASH and PRWE scores were evaluated clinically.

    RESULTS: The overall union rate was 95%. Bone union was achieved in 27 out of 29 (93%) scaphoids treated with a free osteoperiosteal MFC grafts and in 9 out of 9 (100%) scaphoids treated with a free osteochondral MFC graft. The range of motion remained almost unchanged, while grip strength increased significantly (34 kg vs. 44 kg) and the VAS (22-5), DASH (59-19) and PRWE (62-30) score decreased significantly. The scapholunate (71°-65°) and radiolunate (28°-18°) angle decreased. No major donor site morbidity was observed. Postoperative complications were observed in eight cases (21%).

    CONCLUSIONS: The vascularized medial femoral bone graft leads to a good functional outcome in the treatment of scaphoid non-unions. The graft provides adequate blood supply and structural stability to the scaphoid. A proximal pole destruction can be replaced using an osteochondral graft with promising short-term results preventing carpal osteoarthritis and collapse.

    Matched MeSH terms: Range of Motion, Articular
  9. Fasihah Zulkiflee, Ahmad Qushairi Mohamad, Sharidan Shafie, Arshad Khan
    MATEMATIKA, 2019;35(2):117-127.
    MyJurnal
    Free convection flow in a boundary layer region is a motion that results from the interaction of gravity with density differences within a fluid. These differences occur due to temperature or concentration gradients or due to their composition. Studies per- taining free convection flows of incompressible viscous fluids have received much attention in recent years both theoretically (exact or approximate solutions) and experimentally. The situation where the heat be transported to the convective fluid via a bounding sur- face having finite heat capacity is known as Newtonian heating (or conjugate convective flows). In this paper, the unsteady free convection flow of an incompressible viscous fluid between two parallel plates with Newtonian heating is studied. Appropriate non- dimensional variables are used to reduce the dimensional governing equations along with imposed initial and boundary conditions into dimensionless forms. The exact solutions for velocity and temperature are obtained using the Laplace transform technique. The corresponding expressions for skin friction and Nusselt number are also calculated. The graphical results are displayed to illustrate the influence of various embedded parameters such as Newtonian heating parameter and Grashof number. The results show that the effect of Newtonian heating parameter increases the Nusselt number but reduces the skin friction.
    Matched MeSH terms: Motion
  10. Ariff, M.S., Arshad, A.A.
    MyJurnal
    Introduction: Praying represents a fundamental activity of daily living in Muslim community. Muslims need to adopt several postures that require deep flexion of the knee and hip to perform this daily obligation. This is a preliminary report of the study on hip and knee range of motion conducted to obtain normative passive and functional range of flexion data during Muslim prayers in both weight-bearing joints of normal Muslim adults. Methods: A cohort of Malay men aged between 20 to 30 years was recruited in this cross-sectional study. Passive range of motion and flexion angles of the joints in various postures during prayer were measured using a standard goniometer. The difference against existing normative range of motion database available and the influence of various factors were analysed. Factors analysed include body mass index and other anthropometric measurements. Results: Sixty participants recruited for the preliminary phase of this study. The mean (SD) of passive hip and knee flexions were higher compared to other existing normative range of motion database. A unit increase in body mass index will have 0.782 units lower of knee range of motion. The hip and knee flexion arc were from 74.1° to 119.0° and from 3.3° to 119.7° respectively. Conclusion: The range of motion involved for prayers was more for the knee but less for the hip as compared to the measured passive range of motion. Body mass index has a significant linear negative relationship with the passive range of motion of the knee, but not the hip.
    Matched MeSH terms: Range of Motion, Articular
  11. Yong MW, Yusof N, Rampal L, Arumugam M
    J Hand Surg Asian Pac Vol, 2017 Dec;22(4):484-489.
    PMID: 29117832 DOI: 10.1142/S021881041750054X
    BACKGROUND: Palmaris Longus is being widely used in reconstructive, plastic and cosmetic surgeries due to its long tendon. It is the most readily available source for tendon grafting. The objective of this study was to determine the prevalence of absence of Palmaris Longus and its association with gender, hand dominance and absence of FDS (flexor digitorum superficialis) tendon to little finger among Malay population.

    METHODS: An analytical cross sectional study design was used and a self-administered proforma was distributed for data collection. 1239 Malay secondary school children in Putrajaya were tested for absence of Palmaris Longus using Schaffer's test. 4 additional tests namely Thompson's test, Mishra's test I, Mishra's test II and Pushpakumar's 'two-finger sign' method were used to confirm its absence in respondents with negative Schaffer's test. Function of Flexor Digitorum Superficialis tendon to little finger was determined by flexing PIP of little finger while hyperextend the other fingers.

    RESULTS: The prevalence of absence of Palmaris Longus was 11.7%. Left side absence of Palmaris Longus was much common. There was a significant association between absence of Palmaris Longus with gender in which female had higher prevalence of absence of Palmaris Longus than male.

    CONCLUSIONS: In conclusion, the prevalence of absence of Palmaris Longus in Malay population was lower than Indian but higher than Chinese population. Females had higher prevalence of absence of Palmaris Longus and no association can be found with hand dominance and absence of Flexor Digitorum Superficialis tendon to little finger.

    Matched MeSH terms: Range of Motion, Articular
  12. Kapil-Mani KC, Acharya P, Arun S
    Malays Orthop J, 2018 Mar;12(1):15-20.
    PMID: 29725507 DOI: 10.5704/MOJ.1803.003
    Introduction: Various treatment modalities are available but no consensus has been reached for optimal treatment of lateral third clavicle fractures. Precontoured locking plates with broad lateral end for multiple screws fixation is a newly designed plate for lateral third clavicle fractures. The objective of our study was to analyse the functional outcomes as well as complications of this technique in a significant number of cases with long follow-up duration. Materials and Methods: Forty-six patients with distal third clavicle fractures were treated by precontoured clavicular locking plate with broad lateral end. Functional outcomes were assessed on the basis of Constant-Murley Shoulder Outcome Score and University of California, Los Angeles (UCLA) Shoulder Rating Score, active shoulder range of motion, time for fracture union and coraco-clavicular distance. Results: The mean Constant-Murley score was 92.56±4.47 (range: 79-98) for injured side and 96.22±2.23 (range: 90-100) for normal side with p-Value 0.56. Mean coraco-clavicular distance at final follow-up was 10.52±1.13 mm (range 9.7 to 11.7 mm) in injured side and 10.25±0.98 mm (range 9.6 to 11.2 mm) in normal side. Mean UCLA Shoulder Rating Score was 32.55±2.12 (range: 27-34) for injured side and 33.46±1.88 (range: 31- 35) on normal side with p value 0.58. No major complications that necessitated revision of surgery occurred in our study. Conclusion: This newly designed plate seemed extremely useful in successful union of lateral third clavicle fractures, with reduced rate of complications like fixation failures, iatrogenic rotator cuff injury, AC joint osteoarthritis and sub-acromial bursitis, with good functional outcomes.
    Matched MeSH terms: Range of Motion, Articular
  13. Billy TJ, Sreeramareddy CT, Oo PS, Aye SN
    Nicotine Tob Res, 2024 Mar 22;26(4):508-511.
    PMID: 37819726 DOI: 10.1093/ntr/ntad198
    INTRODUCTION: Exposure to tobacco imagery creates a positive impression about smoking and is associated with youth smoking uptake.

    METHODS: From the list of movies released during 2015-2019, we selected the top 10 movies per year rated by the Malaysian Film Development Corporation. Two researchers coded tobacco imagery in each movie considering 5-minute time intervals as a unit. The 5-minute interval coding was adopted from previous research for comparability. Frequencies and the average occurrence of tobacco imagery were compared by movie language, genre, and age categorization.

    RESULTS: In 50 movies analyzed, there were a total of 1037 five-minute intervals of which 26 (52%) movies and 277 (26.7%) of intervals tobacco imagery were present. Brand appearances were absent and health warnings about tobacco use were present in just one movie. The proportions of intervals containing actual use, paraphernalia, and implied use were 63.5%, 22.0%, and 14.5%. Tobacco imagery of actual use, paraphernalia, and implied use was present in 25, 20, and 10 movies, respectively. In those movies with tobacco imagery, the average number of occurrences of actual use, paraphernalia, and implied use was 3 (interquartile range [IQR] 2-11.5), 2.5 (IQR 1.3-4.0), and 1 (IQR 1-4), respectively. Movies classified as "p13" (median 6, IQR 6-13) and "18" (median 5, IQR 0-15) had higher average occurrences of tobacco imagery than "U" movies (median 0, IQR 0-2; p = .028).

    CONCLUSIONS: The lack of health warnings despite the presence of tobacco imagery in Malaysian movies calls for measures to regulate tobacco-related content and reclassify such movies as "for adults-only."

    IMPLICATIONS: Tobacco imagery was prevalent in Malaysian movies that are allowed viewing by individuals aged 13 years and above. A review of the age categorization of Malaysian movies and the placement of health warnings in movies is needed. A comprehensive implementation of the ban on tobacco advertisements, promotion, and sponsorship should also include a ban on tobacco imagery in movies.

    Matched MeSH terms: Motion Pictures as Topic*
  14. Vijayakumar, P., Leonard, H.J., Ayiesah, H.R.
    MyJurnal
    Traumatic knee crush injuries of degloving nature carries a greater risk for the multitude of complications rendering emergency surgical intervention the treatment of choice in the majority of such injuries. These types of injuries commonly result in a unique post- operative complication such as arthrofibrosis and it presents overly challenge for Physiotherapists managing it. In this retrospective single-case report, we describe the challenges of in – and out- patient physiotherapy treatment planning for a 16-year old boy throughout the continuum of care for his knee arthrofibrosis following a series of surgical procedures. As result of his complex medical situation, the time-specific physiotherapy intervention during the immediate post-operative period failed to improve our patient’s knee function. The knee function with regard to range of motion ( especially extension), muscle strength(quadriceps) improved considerably with the adoption of an aggressive physiotherapy intervention approach that included specific quadriceps muscle strengthening, joint mobilization (rotation/traction) in sitting position with legs over the edge of table and contract-relax quadriceps stretching in prone position using theraband.
    Matched MeSH terms: Range of Motion, Articular
  15. Swami V, Zahari HS, Mohd Khatib NA, Toh EKL, Barron D
    Integr Psychol Behav Sci, 2020 06;54(2):416-437.
    PMID: 31950435 DOI: 10.1007/s12124-020-09514-7
    The Round Table Cinema Activity (RTCA) is an intervention designed to promote improved multicultural understanding by having different social identity groups watch a carefully-selected film and take part in repeated dialogic exchanges. Here, we examined the efficacy of the RTCA paradigm at improving inter-ethnic understanding and empathy among members of different social identity groups from the same country (i.e., Malaysian Malays and Chinese). A total of 87 participants completed a measure of ethnocultural empathy before and after the RTCA paradigm, which involved watching the film Sepet, taking part in group discussions, and answering open-ended question about their experiences. Analyses of written responses suggested that the RTCA was successful at promoting intergroup dialogue and exchange of ideas. Analyses of quantitative data suggested significant and large improvements in ethnocultural empathy at post-intervention. Our findings suggest that the RTCA paradigm may be a useful tool for promoting inter-ethnic harmony in the Malaysian context.
    Matched MeSH terms: Motion Pictures as Topic*
  16. Makinejad MD, Abu Osman NA, Abu Bakar Wan Abas W, Bayat M
    Clinics (Sao Paulo), 2013 Sep;68(9):1180-8.
    PMID: 24141832 DOI: 10.6061/clinics/2013(09)02
    This study provides an experimental and finite element analysis of knee-joint structure during extended-knee landing based on the extracted impact force, and it numerically identifies the contact pressure, stress distribution and possibility of bone-to-bone contact when a subject lands from a safe height.
    Matched MeSH terms: Range of Motion, Articular/physiology
  17. Sibidanov A, Varvell KE, Adachi I, Aihara H, Al Said S, Asner DM, et al.
    Phys Rev Lett, 2018 Jul 20;121(3):031801.
    PMID: 30085771 DOI: 10.1103/PhysRevLett.121.031801
    We report the results of a search for the rare, purely leptonic decay B^{-}→μ^{-}ν[over ¯]_{μ} performed with a 711  fb^{-1} data sample that contains 772×10^{6}  BB[over ¯] pairs, collected near the ϒ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e^{+}e^{-} collider. The signal events are selected based on the presence of a high momentum muon and the topology of the rest of the event showing properties of a generic B-meson decay, as well as the missing energy and momentum being consistent with the hypothesis of a neutrino from the signal decay. We find a 2.4 standard deviation excess above background including systematic uncertainties, which corresponds to a branching fraction of B(B^{-}→μ^{-}ν[over ¯]_{μ})=(6.46±2.22±1.60)×10^{-7} or a frequentist 90% confidence level interval on the B^{-}→μ^{-}ν[over ¯]_{μ} branching fraction of [2.9,10.7]×10^{-7}.
    Matched MeSH terms: Motion
  18. Javanmardi A, Ibrahim Z, Ghaedi K, Khan NB, Benisi Ghadim H
    PLoS One, 2018;13(7):e0200482.
    PMID: 30059506 DOI: 10.1371/journal.pone.0200482
    This paper investigated the seismic retrofitting of an existing cable-stayed bridge through the use of a seismic isolation system. The bridge is situated in a high seismic zone. During the Saguenay earthquake 1988, one of the anchorage plates of the bridge supports failed. Herein, several configurations of seismic isolation system were considered to identify an appropriate solution for the seismic retrofitting of the bridge in both the longitudinal and transverse directions. A three-dimensional model of the bridge was created, and its seismic behavior studied through nonlinear dynamic time-history analysis. The comparative performance study among the five retrofitting configurations showed that the partial seismic isolation of the bridge led to an enhancement of the seismic response of the bridge in one direction only. However, the overall seismic response of the cable-stayed bridge substantially improved in the longitudinal and transverse directions in cases where the isolation systems were utilized between the supports and the deck-tower connection of the bridge.
    Matched MeSH terms: Motion
  19. Lim LK, Yap SL, Bradley DA
    PLoS One, 2018;13(1):e0188009.
    PMID: 29309425 DOI: 10.1371/journal.pone.0188009
    The plasma focus device discussed herein is a Z-pinch pulsed-plasma arrangement. In this, the plasma is heated and compressed into a cylindrical column, producing a typical density of > 1025 particles/m3 and a temperature of (1-3) × 107 oC. The plasma focus has been widely investigated as a radiation source, including as ion-beams, electron-beams and as a source of x-ray and neutron production, providing considerable scope for use in a variety of technological situations. Thus said, the nature of the radiation emission depends on the dynamics of the plasma pinch. In this study of the characteristics of deuteron-beam emission, in terms of energy, fluence and angular distribution were analyzed. The 2.7 kJ plasma focus discharge has been made to operate at a pressure of less than 1 mbar rather than at its more conventional operating pressure of a few mbar. Faraday cup were used to determine deuteron-beam energy and deuteron-beam fluence per shot while CR-39 solid-state nuclear track detectors were employed in studying the angular distribution of deuteron emission. Beam energy and deuteron-beam fluence per shot have been found to be pressure dependent. The largest value of average deuteron energy measured for present conditions was found to be (52 ± 7) keV, while the deuteron-beam fluence per shot was of the order of 1015 ions/m2 when operated at a pressure of 0.2 mbar. The deuteron-beam emission is in the forward direction and is observed to be highly anisotropic.
    Matched MeSH terms: Time and Motion Studies
  20. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2016 Jan 22;116(3):032301.
    PMID: 26849587 DOI: 10.1103/PhysRevLett.116.032301
    The production cross sections of the B^{+}, B^{0}, and B_{s}^{0} mesons, and of their charge conjugates, are measured via exclusive hadronic decays in p+Pb collisions at the center-of-mass energy sqrt[s_{NN}]=5.02  TeV with the CMS detector at the CERN LHC. The data set used for this analysis corresponds to an integrated luminosity of 34.6  nb^{-1}. The production cross sections are measured in the transverse momentum range between 10 and 60  GeV/c. No significant modification is observed compared to proton-proton perturbative QCD calculations scaled by the number of incoherent nucleon-nucleon collisions. These results provide a baseline for the study of in-medium b quark energy loss in Pb+Pb collisions.
    Matched MeSH terms: Motion
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links