The 1,053-bp promoter of the oil palm metallothionein gene (so-called MSP1) and its 5' deletions were fused to the GUS reporter gene, and analysed in transiently transformed oil palm tissues. The full length promoter showed sevenfold higher activity in the mesocarp than in leaves and 1.5-fold more activity than the CaMV35S promoter in the mesocarp. The 1,053-bp region containing the 5' untranslated region (UTR) gave the highest activity in the mesocarp, while the 148-bp region was required for minimal promoter activity. Two positive regulatory regions were identified at nucleotides (nt) -953 to -619 and -420 to -256 regions. Fine-tune deletion of the -619 to -420 nt region led to the identification of a 21-bp negative regulatory sequence in the -598 to -577 nt region, which is involved in mesocarp-specific expression. Gel mobility shift assay revealed a strong interaction of the leaf nuclear extract with the 21-bp region. An AGTTAGG core-sequence within this region was identified as a novel negative regulatory element controlling fruit-specificity of the MSP1 promoter. Abscisic acid (ABA) and copper (Cu(2+)) induced the activity of the promoter and its 5' deletions more effectively than methyl jasmonate (MeJa) and ethylene. In the mesocarp, the full length promoter showed stronger inducibility in response to ABA and Cu(2+) than its 5' deletions, while in leaves, the -420 nt fragment was the most inducible by ABA and Cu(2+). These results suggest that the MSP1 promoter and its regulatory regions are potentially useful for engineering fruit-specific and inducible gene expression in oil palm.
Landfills are sources of groundwater and soil pollution due to the production of leachate and its migration through refuse. This study was conducted in order to determine the extent of groundwater and soil pollution within and around the landfill of Seri Petaling located in the State of Selangor, Malaysia. The condition of nearby surface water was also determined. An electrical resistivity imaging survey was used to investigate the leachate production within the landfill. Groundwater geochemistry was carried out and chemical analysis of water samples was conducted upstream and downstream of the landfill. Surface water was also analyzed in order to determine its quality. Soil chemical analysis was performed on soil samples taken from different locations within and around the landfill in the vadose zone (unsaturated zone) and below the water table (in the soil saturated zone). The resistivity image along line L-L1 indicated the presence of large zones of decomposed waste bodies saturated with highly conducting leachate. Analysis of trace elements indicated their presence in very low concentrations and did not reflect any sign of heavy metal pollution of ground and surface water or of soil. Major ions represented by Na, K, and Cl were found in anomalous concentrations in the groundwater of the downstream bore hole, where they are 99.1%, 99.2%, and 99.4%, respectively, higher compared to the upstream bore hole. Electrical conductivity (EC) was also found in anomalous concentration downstream. Ca and Mg ions represent the water hardness (which is comparatively high downstream). There is a general trend of pollution towards the downstream area. Sulfates (SO4) and nitrates (NO3) are found in the area in low concentrations, even below the WHO standards for drinking water, but are significantly higher in the surface water compared to the groundwater. Phosphate (PO4) and nitrite (NO2), although present in low levels, are significantly higher at the downstream. There is no significant difference in the amount of fluoride (F) in the different locations. In the soil vadose zone, heavy metals were found to be in their typical normal ranges and within the background concentrations. Soil exchangeable bases were significantly higher in the soil saturated zone compared to the vadose zone, and no significant difference was obtained in the levels of inorganic pollutants. With the exception of Cd, the concentration ranges of all trace elements (Cu, Zn, Cr, Pb, and Ni) of Seri Petaling landfill soils were below the upper limits of baseline concentrations published from different sources.
As well as for chemical and environmental reasons, acrylamide is widely used in many industrial applications. Due to its carcinogenicity and toxicity, its discharge into the environment causes adverse effects on humans and ecology alike. In this study, a novel acrylamide-degrading yeast has been isolated. The isolate was identified as Rhodotorula sp. strain MBH23 using ITS rRNA analysis. The results showed that the best carbon source for growth was glucose at 1.0% (w/v). The optimum acrylamide concentration, being a nitrogen source for cellular growth, was at 500 mg l(-1). The highest tolerable concentration of acrylamide was 1500 mg l(-1) whereas growth was completely inhibited at 2000 mg l(-1). At 500 mg l(-1), the strain MBH completely degraded acrylamide on day 5. Acrylic acid as a metabolite was detected in the media. Strain MBH23 grew well between pH 6.0 and 8.0 and between 27 and 30 °C. Amides such as 2-chloroacetamide, methacrylamide, nicotinamide, acrylamide, acetamide, and propionamide supported growth. Toxic heavy metals such as mercury, chromium, and cadmium inhibited growth on acrylamide.
Metallothioneins (MTs) are cysteine-rich metal-binding proteins that are involved in cell growth regulation, transportation of metal ions and detoxification of heavy metals. A mesocarp-specific metallothionein-like gene (MT3-A) promoter was isolated from the oil palm (Elaeis guineensis Jacq). A vector construct containing the MT3-A promoter fused to the β-glucuronidase (GUS) gene in the pCAMBIA 1304 vector was produced and used in Agrobacterium-mediated transformation of tomato. Histochemical GUS assay of different tissues of transgenic tomato showed that the MT3-A promoter only drove GUS expression in the reproductive tissues and organs, including the anther, fruit and seed coat. Competitive RT-PCR and GUS fluorometric assay showed changes in the level of GUS mRNA and enzyme activity in the transgenic tomato (T(0)). No GUS mRNA was found in roots and leaves of transgenic tomato. In contrast, the leaves of transgenic tomato seedlings (T(1)) produced the highest GUS activity when treated with 150 μM Cu(2+) compared to the control (without Cu(2+)). However, Zn(2+) and Fe(2+) treatments did not show GUS expression in the leaves of the transgenic tomato seedlings. Interestingly, the results showed a breaking-off tissue-specific activity of the oil palm MT3-A promoter in T(1) seedlings of tomato when subjected to Cu(2+) ions.
The aim of this study was to determine the level of exposure to polychlorinated biphenyls (PCBs) and selected heavy metals among fishermen via dietary intake of fish and other seafood from the eastern coast along the Straits of Malacca. This study determined the neurobehavioural performances (based on neurobehavioural core test battery scores) of the fishermen and evaluated the correlations between scores of neurobehavioural core test battery and exposure factors. Ninety fishermen participated in the study. The total fish intakes of the fishermen were measured using a set of food frequency questionnaires. The PCBs contents in the seafood samples ranged between 0.2 and 0.6 pg/g fresh sample. The concentrations of mercury (Hg), arsenic (As), cadmium (Cd), and lead (Pb) in the seafood samples were 1.1-5.4, 0.3-4.4, 0.6-36.1, and 0.02-0.3 μg/g fresh sample, respectively. The PCBs, Hg, As, Cd, and Pb exposures of the fishermen was estimated to be 2.8, 0.02, 4.5, 0.09, and 0.5 pg/kg body weight/day, respectively. PCB and heavy metal exposures through dietary intake of fish and seafood were within the tolerable daily limits. The results of neurobehavioural core test battery revealed that the neurobehavioural performances of the fishermen were not affected due to PCB and heavy metal intoxication. No correlations were found between the exposure and neurobehavioural performance among the fishermen. These data are useful for policy makers to assure the safety and quality of seafood in relation to sea pollution. Although the levels of exposure were low, periodic assessment of the quality of fish and fish products is required due to the polluted seawater.
Pollutants, especially heavy metals like cadmium, Chromium, lead and mercury, play a significant role in causing various water-borne diseases to humans. This study evaluates the sorption properties of bioactive constituents of Moringa oleifera seeds for decontamination of cadmium at laboratory scale. The performance of the bioactive constituent extracted by salt extraction method was enhanced by process optimization with various concentration of bioactive dosages, agitation speed, contact time, pH and heavy metal concentrations. Statistical optimization was carried out for evaluating the polynomial regression model through effect of linear, quadratic and interaction of the factors. The maximum removal of cadmium was 72% by using 0.2 g/l of bioactive dosage.
In the present study, CMSS (carboxymethyl sago starch)-based hydrogel was synthesized by crosslinking with citric acid via esterification and then applied as a metal sorbent to overcome excessive heavy metal pollution. The CMSS/CA (carboxymethyl sago starch/citric acid) hydrogel was characterized by Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The absorption band at 1726 cm-1 was observed in the FT-IR spectrum of CMSS/CA hydrogel and indicated ester bonds formed. Further findings show that the cross-linkages in the CMSS/CA hydrogel increased the thermal stability of CMSS and various sizes of pores were also shown in the SEM micrograph. Conversely, the removal of heavy metals was analyzed using Inductively Coupled Plasma-Optic Emission Spectra (ICP-OES). The effects of the pH of the metal solution, contact time, initial concentration of the metal ions and temperature on the sorption capacity were investigated. Under optimum condition, the sorption capacity of Pb2+, Cu2+, Ni2+ and Zn2+ onto CMSS/CA hydrogel were 64.48, 36.56, 16.21, 18.45 mg/g, respectively. The experiments demonstrated that CMSS/CA hydrogel has high selectivity towards Pb2+ in both non-competitive and competitive conditions. In conclusion, the CMSS/CA hydrogel as a natural based heavy metal sorption material exhibited a promising performance, especially in the sorption of Pb2+ for wastewater treatment.
Heavy metal pollution has become a major concern globally as it contaminates eco-system, water networks and as finely suspended particles in air. In this study, the effects of elevated silver nanoparticle (AgNPs) levels as a model system of heavy metals, in the presence of microalgal crude extracts (MCEs) at different ratios, were evaluated against the non-cancerous Vero cells, and the cancerous MCF-7 and 4T1 cells. The MCEs were developed from water (W) and ethanol (ETH) as green solvents. The AgNPs-MCEs-W at the 4:1 and 5:1 ratios (v/v) after 48 and 72 h treatment, respectively, showed the IC50 values of 83.17-95.49 and 70.79-91.20 μg/ml on Vero cells, 13.18-28.18 and 12.58-25.7 μg/ml on MCF-7; and 16.21-33.88 and 14.79-26.91 μg/ml on 4T1 cells. In comparison, the AgNPs-MCEs-ETH formulation achieved the IC50 values of 56.23-89.12 and 63.09-91.2 μg/ml on Vero cells, 10.47-19.95 and 13.48-26.61 μg/ml on MCF-7; 14.12-50.11 and 15.13-58.88 μg/ml on 4T1 cells, respectively. After 48 and 72 h treatment, the AgNPs-MCE-CHL at the 4:1 and 5:1 ratios exhibited the IC50 of 51.28-75.85 and 48.97-69.18 μg/ml on Vero cells, and higher cytotoxicity at 10.47-16.98 and 6.19-14.45 μg/ml against MCF-7 cells, and 15.84-31.62 and 12.58-24.54 μg/ml on 4T1 cells, respectively. The AgNPs-MCEs-W and ETH resulted in low apoptotic events in the Vero cells after 24 h, but very high early and late apoptotic events in the cancerous cells. The Liquid Chromatography-Mass Spectrometry-Electrospray Ionization (LC-MS-ESI) metabolite profiling of the MCEs exhibited 64 metabolites in negative ion and 56 metabolites in positive ion mode, belonging to different classes. The microalgal metabolites, principally the anti-oxidative components, could have reduced the toxicity of the AgNPs against Vero cells, whilst retaining the cytotoxicity against the cancerous cells.
Edible bird's nest (EBN) is recognized as a nourishing food among Chinese people. The efficacy of EBN was stated in the records of traditional Chinese medicine and its activities have been reported in many researches. Malaysia is the second largest exporter of EBNs in the world, after Indonesia. For many years, EBN trade to China was not regulated until August 2011, when a safety alert was triggered for the consumption of EBNs. China banned the import of EBNs from Malaysia and Indonesia due to high level of nitrite. Since then, the Malaysia government has formulated Malaysia Standards for swiftlet farming (MS 2273:2012), edible bird's nest processing plant design and management (MS 2333:2010), and edible bird's nest product quality (MS 2334:2011) to enable the industry to meet the specified standards for the export to China. On the other hand, Indonesia's EBN industry formulated a standard operating procedure (SOP) for exportation to China. Both countries can export EBNs to China by complying with the standards and SOPs. EBN contaminants may include but not limited to nitrite, heavy metals, excessive minerals, fungi, bacteria, and mites. The possible source of contaminants may come from the swiftlet farms and the swiftlets or introduced during processing, storage, and transportation of EBNs, or adulterants. Swiftlet house design and management, and EBN processing affect the bird's nest color. Degradation of its optical quality has an impact on the selling price, and color changes are tied together with nitrite level. In this review, the current and future prospects of EBNs in Malaysia and Indonesia in terms of their quality, and the research on the contaminants and their effects on EBN color changes are discussed.
Introduction: In Malaysia, herbal medicines are used for variety of reasons including health promotion and home remedies during pregnancy and postpartum with Manjakani (Quercus infectoria) as one of the most commonly consumed herbs. Herbal medicines consumption had been linked to heavy metals contamination and transfer from mother to infant and may affect infant’s growth and development. This study aims to (i) determine Manjakani consumption among postpartum mothers, (ii) quantify its heavy metals level, namely lead, cadmium, arsenic and chromium, and (iii) determine health risk associated with its consumption. Methods: A cross-sectional study involving 106 postpartum mothers was carried out in Kuala Lumpur. Six samples of Manjakani were sampled and extracted using microwave digester and analysed using Inductively coupled plasma mass spectrometry (ICP-MS). Non-carcinogenic health risks for herbal medicine consumption were calculated using Hazard Quotient (HQ). Results: Manjakani was consumed by 16% of mothers (n=17). Highest level of the metals was shown by chromium with mean concentration of 4210 ± 1910 ug/kg, followed by lead (170.8 ± 193.2), arsenic (39.3 ± 27.1) and cadmium (7.7 ± 0.76). There were no significant non-carcinogenic health risks with lead, arsenic, chromium and cadmium contamination (HQ < 1). Conclusion: Manjakani is consumed by mothers during confinement period. Heavy metals were quantified in Manjakani although no significant association was observed with socio-demographic characteristics and birth outcomes.
Phytoremediation is one of the environmental-friendly and cost-effective systems for the treatment of wastewater, including industrial wastewater such as palm oil mill effluent final discharge (POME FD). However, the effects of the wastewater on the phytoremediator plants, in term of growth performance, lignocellulosic composition, and the presence of nutrients and heavy metals in the plants are not yet well studied. In the present work, we demonstrated that POME FD increased the growth of P. purpureum. The height increment of P. purpureum supplied with POME FD (treatment) was 61.72% as compared to those supplied with rain water (control) which was 14.42%. For lignocellulosic composition, the cellulose percentages were 38.77 ± 0.29% (treatment) and 34.16 ± 1.01% (control), and the difference was significant. These results indicated that POME FD could be a source of plant nutrients, which P. purpureum can absorb for growth. It was also found that the heavy metals (Al, As, Cd, Co, Cr, Ni and Pb) inside the plant were below the standard limit of the World Health Organization (WHO). Since POME FD was shown to have no adverse effects on P. purpureum, further research regarding the potential application of P. purpureum following phytoremediation of POME FD such as biofuel production is warranted to evaluate its potential use to fit into the waste-to-wealth agenda.
The remarkable journey of progression of mankind has created various impacts in the form of polluted environment, amassed heavy metals and depleting resources. This alarming situation demands sustainable energy resources and approaches to deal with these environmental hazards and power deficit. Pyrolysis and co-pyrolysis address both energy and environmental issues caused by civilization and industrialization. The processes use hazardous waste materials including waste tires, plastic and medical waste, and biomass waste such as livestock waste and agricultural waste as feedstock to produce gas, char and pyrolysis oil for energy production. Usage of hazardous materials as pyrolysis and co-pyrolysis feedstock reduces disposal of harmful substances into environment, reducing occurrence of soil and water pollution, and substituting the non-renewable feedstock, fossil fuels. As compared to combustion, pyrolysis and co-pyrolysis have less emission of air pollutants and act as alternative options to landfill disposal and incineration for hazardous materials and biomass waste. Hence, stabilizing heavy metals and solving the energy and waste management problems. This review discusses the pyrolysis and co-pyrolysis of biomass and harmful wastes to strive towards circular economy and eco-friendly, cleaner energy with minimum waste disposal, reducing negative impact on the planet and creating future possibilities.
Bacterial isolates from 30 farmed bullfrogs (Lithobates catesbeianus) weighing 500-600 g at Johore, Malaysia with external clinical signs of ulcer, red leg and torticollis were tested for their antibiograms and heavy metal tolerance patterns. A total of 17 bacterial species with 77 strains were successfully isolated and assigned to 21 antibiotics and 4 types of heavy metal (Hg(2+), Cr(6+), Cd(2+), Cu(2+)). Results revealed that bacteria were resistant against lincomycin (92%), oleandomycin (72.7%) and furazolidone (71.4%) while being susceptible to chloramphenicol and florfenicol at 97.4%. The multiple antibiotic resistance (MAR) index for C. freundii, E. coli and M. morganii was high with the value up to 0.71. Bacterial strains were found to exhibit 100 % resistance to chromium and mercury. High correlation of resistance against both antibiotics and heavy metals was found (71.4 to 100%) between bullfrog bacteria isolates, except bacteria that were resistant to kanamycin showed only 25% resistance against Cu(2+). Based on the results in this study, bacterial pathogens of bullfrog culture in Johore, Malaysia, were highly resistant to both antibiotics and heavy metals.
Introduction: Consumption of Chinese Herbal Medicine (CHMs) have escalated globally. They are preferred treat- ment for minor diseases or disorders. In Malaysia, CHMs are common home remedies during pregnancy and postpar- tum. Angelica sinensis (Danggui) is a staple CHMs during postpartum for purpose of nourishing blood and resolving stasis. Concerns are raised over possible heavy metals toxicity. Objective: This study aims to (i) determine Danggui consumption among postpartum mothers, (ii) quantify its heavy metals level, namely Lead (Pb), Cadmium (Cd), Ar- senic (As) and Chromium (Cr) and (iii) determine health risks of Danggui consumption among mothers. Methods: A cross-sectional study involving 112 postpartum mothers was carried out in Kuala Lumpur. Danggui samples were collected from nine districts in Kuala Lumpur (Segambut, Seputeh, Cheras, Kepong, Bandar Tun Razak, Titiwangsa, Setiawangsa, Batu and Lembah Pantai). Heavy metals were extracted using microwave digester and analysed using Inductively coupled plasma mass spectrometry (ICPMS). Hazard Quotient (HQ) was used to determine non-carcino- genic health risks for herbal medicine consumption. Results: Danggui was consumed by 19.6% of mothers (n=22). Among them, incidence of jaundice was 63.6% and need for phototherapy was 40.9%. Heavy metals contamina- tions were found in the decreasing order of Cr > As > Pb > Cd with median (interquartile) of 3996.3 (2805.6) μg/ kg, 128.3 (56.7), 98.6 (99.1) and 37.0 (35.0) respectively. No non-carcinogenic health risks were found for all four metals. Conclusion: Alarming concentrations of heavy metals were quantified in Danggui warranting for further in- vestigation to safeguard health of postpartum mothers.
Proteases in ginger rhizome have the potentials in industrial applications. This study was conducted to extract and characterize the proteolytic enzyme from ginger (Zingiber officinale Roscoe). Ginger protease (GP) was extracted from ginger rhizome by homogenization with 100 mM potassium phosphate buffer pH 7.0 containing 10 mM cysteine and 5 mM EDTA which were found to be the most efficient extraction buffer and stabilizers. After centrifugation at 10,500 x g, protein in the crude extract was precipitated using 60% ammonium sulfate following which the precipitate was redissolved in 50 mM potassium phosphate buffer pH 7.0, dialyzed and then lyophilized. The extraction method yielded 0.94% (w/w of fresh weight) of GP with a specific activity of 27.6 ± 0.1 Unit/mg protein where 1 Unit is defined as the amount of protease causing an increase in absorbance by 1 unit per minute using azocasein as the substrate. Results show that the GP was completely inhibited by heavy metal cations i.e. Cu2+and Hg2+, and a thiol blocking agent or inhibitor, n-ethyl maleimide (NEM), indicating that GP is most probably a cysteine protease. The enzyme has an optimum temperature at 60⁰C and the optimum pH ranged between pH 6 to 8. Monovalent cations (K+ and Na+) have no significant effect on activity of GP, but divalent and trivalent cations showed moderate inhibitory effect. Detergents such as sodium dodecyl sulfate increased the activity of GP while Tween 80 and Tween 20 slightly reduced the activity.
This study described the antibiotic and heavy metal resistance pattern of 17 isolates of Edwardsiella tarda obtained from Asian seabass (Lates calcarifer). E.tarda isolates were resistant to oleandomycin, lincomycin, novobiocin and spiramycin. In contrast, most of the isolates showed high level of susceptibility to tetracycline, doxycycline, florfenicol, chloramplenicol, nitrofurantoin, fosfomycin, kanamycin, oxolinic acid and flumequine. MAR value was 0.35 which indicated that the cultured Asian seabass have received high exposure to those tested antibiotics. Besides, very high level of heavy metal resistance among these isolates was observed. Genotypic profile of DNA fingerprintings generated by RAPD-PCR using M13 universal primer and M13 wild type phage primer showed high degree of genetic diversity with percentages similarity and genetic distance among the isolates were ranging from 10.5% to 100% and 0 to 0.895, respectively. This result indicates that strains that belong to the same origin were not always closely related genetically.
Background: The public health issue of consuming groundwater is a major concern because people often extract groundwater directly from the aquifers either through wells or boreholes without treating it with any form of filtration system or chlorine disinfection. Based on the Malaysian National Drinking Water guidelines the current study was designed to provide a better understanding on the variable factors that are influencing the quality of well-water in an urbanised village in Malaysia. Well water quality assessment of heavy metals, chemicals, microbial and physical parameters were carried out for Sungai Buloh Village in the Klang Valley to ensure it was safe for human consumption.
Materials and Methods: Water samples were collected from wells at four sites (Sites A,B,C,D), a river and a tap inside a house in Sungai Buloh village. Soil was sampled from the riverbed and area surrounding the wells. Samples were collected every two months over a one year duration from all sites. The water samples were processed and examined for viruses, coliforms and protozoa as well as for heavy metal contaminants.
Results: The turbidity and colour ranged in the average of 0.57-0.13 Nephelometric Turbidity (NTU) and 4.16-5.00 Total Conjunctive Use (TCU) respectively for all sites except Site C. At Site C the turbidity level was 2.56 ± 1.38 NTU. The well-water was polluted with coliforms (1.2 to 2.4 x 103 CFU/100 ml) in all sites, E. coli (0.12 - 4 x 102 CFU/100 ml CFU/ 100 ml) and Cryptosporidium oocysts (0.4 cysts/100 ml). All the heavy metals and chemical parameters were within the Malaysian Guidelines’ limits except manganese. The average pH ranged from 5.44 - 6.62 and the temperature was 28 ºC.
Conclusion: In summary, the well water at Sungai Buloh is considered unsafe for consumption due to pollution. Therefore the major thrust will be to provide better quality of drinking water to the residents of the village.
The volume of contaminated rivers in Malaysia continues to keep rising through the years. The
cost of instrumental monitoring is uneconomical and prohibits schedule monitoring of
contaminants particularly heavy metals. In this work, a rapid enzyme assay utilizing the
molybdenum-reducing enzyme as an inhibitive assay, prepared in crude form from the
molybdenum-reducing bacterium Serratia sp. strain DRY5 has been developed for monitoring
the heavy metals mercury, silver, copper and chromium in contaminated waters in the Juru
Industrial Estate. The crude enzyme extract transformed soluble molybdenum
(phosphomolybdate) into a deep blue solution, which is inhibited by heavy metals such as
mercury, silver, copper and chromium. The IC50 and Limits of Detection (LOD) values for
mercury, copper, silver and cadmium were 0.245, 0.298, 0.367, 0.326, and 0.124, 0.086, 0.088
and 0.094 mg L-1, respectively. The assay is rapid, and can be carried out in less than 10 minutes.
In addition, the assay can be carried out at ambient temperature. The IC50 values for these heavy
metals are more sensitive than several established assays. Water samples from various locations
in the month of November from the Juru Industrial Estate (Penang) were tested for the presence
of heavy metals using the developed assay. Enzyme activity was nearly inhibited for water
samples from several locations. The presence of heavy metals was confirmed instrumentally
using Atomic Emission Spectrometry and a Flow Injection Mercury System. The assay is rapid
and simple and can be used as a first screening method for large scale monitoring of heavy
metals.
Background: Prolonged exposure of heavy metals in the respirable particulate matter (PM10) from municipal solid waste (MSW) landfills may affect children health. Objective: To investigate the association of reported respiratory symptom with heavy metals in PM10, with heavy metals in fingernails among children residing close to MSW landfills. Methods: Two groups of children age 7 to 12 years old were involved in this cross-sectional study. Those residing within 3 km radius from a landfill were the exposed group and those residing more than 3 km radius as the unexposed group. Questionnaires adapted from American Thoracic Society were applied in the survey. Fingernails were used as biomarker. Ten heavy metals elements in PM and fingernail samples were analysed using inductively coupled plasma mass spectrometry (ICP-MS). Results: The cadmium, chromium, copper, manganese, nickel and lead concentrations in PM around the MSW landfills and residential areas exceeded the Canada and USEPA standard permissible limit. Heavy metals in fingernails (p
The indiscriminate released of heavy metals and xenobiotics into soils and aquatic bodies
severely alter soil organisms and the ecosystem. The isolation of xenobiotics degrading
microorganisms is cost-effective and naturally pleasant approach. Lately, the toxicological effect
of molybdenum to the spermatogenesis of several organisms has been record. This present study
is aimed at the isolation and characterization of a bacterium capable of converting molybdenum
to the colloidal molybdenum blue. Bacteria characterization was performed in a microplate
format using resting cells. Thus, the reduction process can be employed as a device for
molybdenum bioremediation. The results of the study revealed an optimum reduction at pH
between 6.0 and 6.3 and temperatures of between 25 and 40 oC. Similarly, it was also observed
that a phosphate concentration not greater than 5.0 mM and a sodium molybdate concentration
at 20 mM was required for reduction. Glucose was observed as the best carbon source to support
reduction. Following the scanning of molybdenum blue, it revealed an absorption spectrum
indicating the characteristics of molybdenum blue as a reduced phosphomolybdate. Molybdenum
reduction is inhibited by heavy metals like silver, lead, arsenic and mercury. Furthermore, the
ability of the bacterium (Pseudomonas sp. strain Dr.Y Kertih) to utilize several organic
xenobiotics such as phenol, acrylamide, nicotinamide, acetamide, iodoacetamide, propionamide,
acetamide, sodium dodecyl sulfate (SDS) and diesel as electron donor sources for aiding
reduction or as carbon sources for growth was also examined. Finding showed that none was
capable of aiding molybdenum reduction, however the bacterium was capable of growing on both
diesel and phenol as carbon sources. GC analysis was used to confirmed diesel degradation.