We have experimentally demonstrated an optical fiber Mach-Zehnder interferometer (MZI) structure formed by a few-mode photonic crystal fiber (PCF) for curvature measurement and inscribed a fiber Bragg grating (FBG) in the PCF for the purpose of simultaneously measuring temperature. The structure consists of a PCF sandwiched between two multi-mode fibers (MMFs). Bending experimental results show that the proposed sensor has a sensitivity of -1.03 nm/m-1at a curvature range from 10 m-1to 22.4 m-1, and the curvature sensitivity of the embedded FBG was -0.003 nm/m-1. Temperature response experimental results showed that the MZI's wavelength, λa, has a sensitivity of 60.3 pm/°C, and the FBG's Bragg wavelength, λb, has sensitivity of 9.2 pm/°C in the temperature range of 8 to 100 °C. As such, it can be used for simultaneous measurement of curvature and temperature over ranges of 10 m-1to 22.4 m-1and 8 °C to 100 °C, respectively. The results show that the embedded FBG can be a good indicator to compensate the varying ambient temperature during a curvature measurement.
Temporal variation of Synechococcus, its production (μ) and grazing loss (g) rates were studied for 2 years at nearshore stations, i.e. Port Dickson and Port Klang along the Straits of Malacca. Synechococcus abundance at Port Dickson (0.3-2.3 × 10(5) cell ml(-1)) was always higher than at Port Klang (0.3-7.1 × 10(4) cell ml(-1)) (p 0.25), but nutrient and light availability were important factors for their distribution. The relationship was modelled as log Synechococcus = 0.37Secchi - 0.01DIN + 4.52 where light availability (as Secchi disc depth) was a more important determinant. From a two-factorial experiment, nutrients were not significant for Synechococcus growth as in situ nutrient concentrations exceeded the threshold for saturated growth. However, light availability was important and elevated Synechococcus growth rates especially at Port Dickson (F = 5.94, p 0.30). In nearshore tropical waters, an estimated 69 % of Synechococcus production could be grazed.
A study was carried out to observe the fermentation process for noni (Morinda citrifolia L.) extract by Saccharomyces cerevisiae. The experiment was based on a central composite rotatable design (CCRD) employing 5 center points with augmented axial and factorial points resulting in 30 runs. The M. citrifolia extract was fermented with different combination of substrate concentration (40, 50, 60, 70 and 80%) (w/v), inoculum size (0, 1.5, 3, 4.5 and 6%) (v/v), temperature (30, 33.5, 37, 40.5 and 44oC) and fermentation time (0, 1.5, 3, 4.5 and 6 days). Five physico-chemical characteristics which include pH, titratable acidity, turbidity, total soluble solids and total polyphenol content were measured. Results showed that all the responses could be well represented using statistical models. For pH, only fermentation time was found to be not significant, while for titratable acidity and total polyphenol content, the effects of substrate concentration and fermentation time were significant. The effects of inoculum size and temperature level were found to be significant for turbidity. For total soluble solids, only the effect of substrate concentration and inoculum size were found to be significant.
The use of wireless sensor networks (WSNs) in modern precision agriculture to monitor climate conditions and to provide agriculturalists with a considerable amount of useful information is currently being widely considered. However, WSNs exhibit several limitations when deployed in real-world applications. One of the challenges faced by WSNs is prolonging the life of sensor nodes. This challenge is the primary motivation for this work, in which we aim to further minimize the energy consumption of a wireless agriculture system (WAS), which includes air temperature, air humidity, and soil moisture. Two power reduction schemes are proposed to decrease the power consumption of the sensor and router nodes. First, a sleep/wake scheme based on duty cycling is presented. Second, the sleep/wake scheme is merged with redundant data about soil moisture, thereby resulting in a new algorithm called sleep/wake on redundant data (SWORD). SWORD can minimize the power consumption and data communication of the sensor node. A 12 V/5 W solar cell is embedded into the WAS to sustain its operation. Results show that the power consumption of the sensor and router nodes is minimized and power savings are improved by the sleep/wake scheme. The power consumption of the sensor and router nodes is improved by 99.48% relative to that in traditional operation when the SWORD algorithm is applied. In addition, data communication in the SWORD algorithm is minimized by 86.45% relative to that in the sleep/wake scheme. The comparison results indicate that the proposed algorithms outperform power reduction techniques proposed in other studies. The average current consumptions of the sensor nodes in the sleep/wake scheme and the SWORD algorithm are 0.731 mA and 0.1 mA, respectively.
The steady two dimensional magnetohydrodynamic (MHD) boundary layer flow and heat transfer over a stretching/shrinking permeable wedge is numerically investigated. The partial differential equations governing the flow and heat transfer are transformed into a system of ordinary differential equations using a similarity transformation. These equations are then solved numerically using the boundary value problem solver, bvp4c in Matlab software. It is found that dual solutions exist for a certain range of the shrinking strength. A stability analysis is performed to identify which solution is stable and physically reliable.
Yeast growth and biomass production are greatly influenced by the length of the
incubation period during cultivation. Therefore, this study was conducted to
investigate the growth kinetics of five Lipomyces starkeyi strains as determined by
biomass production. The five L. starkeyi strains, namely L. starkeyi ATCC 12659, L.
starkeyi MV-1, L. starkeyi MV-4, L. starkeyi MV-5 and L. starkeyi MV-8, were inoculated
in sterilized Yeast Malt broth, and, incubated for 192 hr at ambient temperature.
Biomass yields were assessed and calculated gravimetrically every 24 hr. Results
indicated that the optimal biomass production of L. starkeyi ATCC 12659, L. starkeyi
MV-1, L. starkeyi MV-4, L. starkeyi MV-5 and L. starkeyi MV-8 were at 120, 168, 144,
168 and 120 hr, with the concentrations of 6.64, 6.43, 9.78, 11.23 and 8.56 g/L,
respectively. These results indicate that each L. starkeyi strain requires specific
incubation period for the optimum production of fungal biomass. Therefore, by
cultivating each L. starkeyi strain at the predetermined incubation period, biomass
yields could significantly be improved for further downstream applications such as
single cell protein and lipid production.
Oil palm frond is known to be the largest contributor to the oil palm residues, providing
up to 50.3% of the total residues. Since it has a very limited utility, an initiative was taken
by this study to investigate its suitability for bio-oil production. Hence, slow pyrolysis was
conducted in an experimental setup equipped with a fixed bed reactor and a liquid collection
system. From the experiments, the effect of reaction temperature on the bio-oil yield was
examined. The characteristics of the obtained bio-oil were also investigated to study its
potential as a substitute of phenol. It was found that at reaction temperature of 375oC,
highest yield of bio-oil was obtained at 38.4 wt%. Meanwhile, the characteristics of oil palm
frond and its bio-oil were found to be approximately similar to the characteristics of typical
softwoods and their bio-oil. Most softwood biomass has been successfully used as a phenol
substitute. Therefore, the potential of this bio-oil to be used as a phenol substitute was
enhanced.
This paper reviews recent progress in the measurement and modelling of stochastic electromagnetic fields, focusing on propagation approaches based on Wigner functions and the method of moments technique. The respective propagation methods are exemplified by application to measurements of electromagnetic emissions from a stirred, cavity-backed aperture. We discuss early elements of statistical electromagnetics in Heaviside's papers, driven mainly by an analogy of electromagnetic wave propagation with heat transfer. These ideas include concepts of momentum and directionality in the realm of propagation through confined media with irregular boundaries. We then review and extend concepts using Wigner functions to propagate the statistical properties of electromagnetic fields. We discuss in particular how to include polarization in this formalism leading to a Wigner tensor formulation and a relation to an averaged Poynting vector.This article is part of the theme issue 'Celebrating 125 years of Oliver Heaviside's 'Electromagnetic Theory''.
Owing to their high-risk factor, many attempts have been made to remove radionuclides from water. Sr2+ ions are the target of removal by synthesized hydroxyapatite in this research. A facile method for synthesizing high-surface-area hydroxyapatite by in-situ precipitation using excess diammonium phosphate solution and without any additive was developed. The highest surface area achieved using this method was 177.00 m2/g, and the synthesized hydroxyapatite was also mesoporous. The effects of different pH, temperatures, and ion concentrations during synthesis on the properties of the hydroxyapatite were assessed, and it was found that a low temperature and high pH were optimal for synthesizing high-surface-area hydroxyapatite. The maximum strontium removal capacity of 28.51 mg/g was achieved when the pH-7.5 solution was used. This performance is competitive in comparison with previously developed synthesized materials. Synthesized hydroxyapatite could effectively remove radioactive strontium from an aqueous solution for nuclear waste management.
The rapid development of open source developmental boards incorporating microcontrollers on printed circuit boards has offered many alternatives in creating feasible, low cost indoor environment monitoring and controlling platforms. Data are collected and stored in predetermined locations throughout a series of communication activities between a network of active sensors and their processing units. However, the issue of data precision and accuracy are of real concern for generating baseline information. Therefore, with that in mind, the purpose of this paper is to accentuate an insightful trend of retrieving indoor environment data (temperature and relative humidity) for an office building in a hot and humid climate condition. The indoor parameters were monitored using a combination of a single board microcontroller with an active sensor with well calibrated thermal microclimate devices. Accordingly, it was found that proactive adjustment can be conducted in order to minimize waste.
The viability of three recently isolated local strains of Bact. typhosus has been studied on 20 specimens of local hawker’s syrup used for sweetening ice balls and ice water. Precise survival times cannot be stated and only relatively wide limits can be estimated differing possibly in every individual case. Survival is influenced by the following factors : 1. The character of the containing material 2. The presence of other bacteria 3. Temperature 4. The presence of bactericidal agents or substances Significant diminution of the number of bacteria in 2 to 5 days after inoculation to sugar solutions is an important observation although survival up to two weeks has been noticed in repeated experiments. The results of experiments conducted in market syrup samples and on control experiments with laboratory sugar solutions indicate that the survival of the organisms tends to be more prolonged in dilute solutions than in concentrated
Baking temperature and time are among the conditions for producing good quality cakes. The aim of this study was to investigate the effects of baking temperature and time on the volume expansion, moisture content, and texture of moist cakes baked in either an air fryer or a convection oven. The cakes were baked under different conditions: (1) baking temperature of 150 °C, 160 °C, and 170 °C for both air fryer and convection oven and (2) baking time of 25, 30, 35 min for air fryer and 35, 40, 45 min for convection oven. Baking temperature and time were found to have a significant (p
Water treatment plants generate vast amounts of sludge and its disposal is one of the most expensive and environmentally problematic challenges worldwide. As sludge from water treatment plants contains a considerable amount of titanium, both can create serious environmental concerns. In this study, the potential to recover titanium from drinking water treatment residue was explored through acid leaching technique. Statistical design for the optimization of titanium recovery was proposed using response surface methodology (RSM) based on a five-level central composite design (CCD). Three independent variables were investigated, namely the acid concentration (3 M-7 M), temperature (40 °C - 80 °C) and solid/liquid ratio (0.005-0.02 g/mL). According to the analysis of variance (ANOVA), the p-value (<0.0001) indicated the designed model was highly significant. Optimization using RSM gave the best fit between validated and predicted data as elucidated by the coefficient of determination with R2 values of 0.9965. However, acid concentration and solid/liquid ratio showed an initial increase in titanium recovery followed by recovery reduction with increasing concentration and ratio. Quadratic RSM predicted the maximum recovery of titanium to be 67.73% at optimal conditions of 5.5 M acid concentration, at a temperature of 62 °C with a solid/liquid ratio of 0.01 g/mL. The verification experiments gave an average of 66.23% recovery of titanium, thus indicating that the successfully developed model to predict the response. This process development has significant importance to reduce the cost of waste disposal, environmental protection, and recovery of economically valuable products.
Inclusive analysis on the optical characteristics of InGaAs/GaAs QW structure for 980 nm semiconductor laser operation is presented from experimental and theoretical point of view. The InGaAs/GaAs quantum well structure is grown by molecular beam epitaxy at different indium composition and quantum well thickness for optical characteristic comparison. Photoluminescence spectra from the measurement show that the spectrum is in good agreement with the simulation results. Detail simulation on the material gain for the InGaAs/GaAs quantum well as a function of carrier densities and operating temperature is also performed in order to optimize the semiconductor laser design for device fabrication.
This study was carried out to elucidate the effect of three types of cation (K+, Ca2+ and Na+) at various concentrations on the gelling properties of untreated Eucheuma cottoni, with the ultimate aim to explore the possibility of utilizing the seaweed in its natural form as gelling agent. Results obtained suggest that E. cottonii also exhibited the dramatic cation specificity of k-carrageenan, in which the dependence of gel strength follows the order: K+ > Ca2+ > Na+. As expected, cations addition exerts adverse effect on the syneresis, water holding capacity and freeze-thaw stability of the seaweed gel. Water holding capcity of the gel is however independent of the increased concentrations of K+(p>0.05). Storage duration and storage temperature significantly (p<0.05) affect the syneresis and water holding capacity of the gel. Among the cations, K+ appears to be better in improving the gel properties of the seaweed.
Copper phthalocyanine (CuPc) thin films have been prepared using a simple spin coating method. The films were annealed at 5 different temperatures (323, 373, 473, 523 and 573 K) for one hour in air. Optical properties study using the UV-Vis spectrophotometer showed that in the range of wavelength of 300-800 nm, all of the films have identical absorption coefficient patterns and there was no systematic changes with respect to annealing temperature. The film annealed at 373 K showed the highest absorbance while the lowest absorbance was shown by the film annealed at 323 K. The results showed that the optical band gaps depended on the temperature. The film annealed at 373 K has the lowest optical energy gap. Using the five annealed films, solar cell with the configuration of Ag / n-Si / CuPc / Ag were fabricated. Under the 50 W/cm2 light illumination, the current voltage measurements at room temperature were carried out on the device. The device which consists of film annealed at 373 K exhibited the best photovoltaic characteristics. The different annealing temperature also affect the photovoltaic behavior of the devices in a non-systematic way.
This paper presents a numerical analysis of a stagnation-point flow towards a nonlinearly stretching/shrinking sheet immersed in a viscous fluid. The stretching/shrinking velocity and the external flow velocity impinges normal to the stretching/shrinking sheet are assumed to be in the form U ~ xm, where m is a constant and x is the distance from the stagnation point. The governing partial differential equations are converted into ordinary ones by a similarity transformation, before being solved numerically. The variations of the skin friction coefficient and the heat transfer rate at the surface with the governing parameters are graphed and tabulated. Different from a stretching sheet, it is found that the solutions for a shrinking sheet are non-unique for m > 1/3.
Sampels of Mnx-zMgzZn1-xFe2O4 ferrites, with x = 0.5, 0 < z < 0.5; x = 0.6, 0 < z 0.6 and x = 0.7, 0 < z < 0.7, were prepared by solid state reaction. For all samples, magnetization as a function of applied magnetic field was measured at room temperature (TR) and several temperatures above TR but below the Neel temperature (TN); while magnetic hysteresis was obtained at TR and 373 K using a vibrating sample magnetometer (VSM). Electrical resistivity at TR was measured by a two terminal method. The three series of Mn-Mg-Zn ferrite indicate a maximum ,agnetization at certain substitution of Mg. TN increased with the increase of Mg content while resistivity varied in the opposite manner. The variation of magnetization is interpreted as due to Mg started to replace the Mn at the tetrahedral sites (A) so that the resultant magnetic moment increased. However further substitution occurred at the octahedral sites (B), thus lowering the magnetic moment. A small coercivity indicates that the samples are soft ferrites with a small energy loss. A reduction in the electrical resistivity with Mg content probably due to an increase in the mobility of charge hopping between the Fe2+ and Fe3+ ions and also between Mn2+ and Mn3+ ions.
Sampel ferit Mnx-zMgzZn1-xFe2O4 dengan x = 0.5, 0 < z < 0.5; x = 0.6, 0 < z 0.6 dan x = 0.7, 0 < z < 0.7, disediakan dengan tindak balas keadaan pepejal. Pengukuran pemagnetan sebagai fungsi medan magnet dilakukan pada suhu bilik (TR) dan suhu-suhu yang lebih tinggi tetapi di bawah suhu Neel bilik (TR) dan suhu-suhu yang lebih tinggi tetapi di bawah suhu Neel (TN) serta histerisis magnet pada suhu bilik dan 373 K diperolehi untuk semua sampel menggunakan magnetometer sampel bergetar (VSM). Kerintangan elektrik pada suhu bilik diperolehi dengan kaedah dua terminal. Ketiga-tiga siri ferit Mn-Mg-Zn itu masing-masing menunjukkan suatu pemagnetan maksimum pada suatu kadar penggantian Mn oleh Mg. TN meningkat dengan kandungan Mg tetapi kerintangan elektrik berubah sebaliknya. Perubahan pemagnetan seperti yang tersebut disebabkan Mg mula menggantikan Mn pada tapak tetrahedron (A) menyebabkan momen magnet paduan meningkat. Penambahan Mg seterusnya menyebabkan Mn pada tapak oktahedron pula diganti, sehingga momen magnet paduan mengurang. Koersiviti yang kecil menunjukkan sampel bersifat magnet lembut dengan kehilangan tenaga yang sangat kecil. Pengurangan kerintangan dengan penambahan Mg mungkin disebabkan oleh peningkatan kelincahan pembawa cas yang melompat di antara ion-ion Fe2+ dan Fe3+ dan juga di antara Mn2+ dan Mn3+.
The linear stability theory is applied to investigate the effects of rotation and feedback control on the onset of steady and oscillatory thermocapillary convection in a horizontal fluid layer heated from below with a free-slip bottom. The thresholds and codimension-2 points for the onset of steady and oscillatory convection are determined. The effect of feedback control on the parameter space dividing the steady and oscillatory convection regions is demonstrated.
The paper reconsiders the problem of the mixed convection boundary layer flow near the lower stagnation point of a horizontal circular cylinder with a second order slip velocity model and a constant surface heat flux studied recently by RoKa et al. (2013). The ordinary (similarity) differential equations are solved numerically using the function bvp4c from Matlab for different values of the governing parameters. It is found that the similarity equations have two branches, upper and lower branch solutions, in a certain range of the mixed convection parameters. A stability analysis has been performed to show that the upper branch solutions are stable and physically realizable, while the lower branch solutions are not stable and therefore, not physically possible. This stability analysis is different by that presented by RoKa et al. (2013), who have presented a time-dependent analysis to determine the stability of the solution branches.