Displaying publications 4481 - 4500 of 9872 in total

Abstract:
Sort:
  1. Fulltext Evaluation of the Elecsys(®) Anti-HCV II assay for routine hepatitis C virus screening of different Asian Pacific populations and detection of early infection
    Yoo SJ, Wang LL, Ning HC, Tao CM, Hirankarn N, Kuakarn S, et al.
    J Clin Virol, 2015 Mar;64:20-7.
    PMID: 25728074 DOI: 10.1016/j.jcv.2014.12.015
    Early diagnosis of hepatitis C virus (HCV) infection is essential to allow appropriate treatment and prevent transmission.
    Matched MeSH terms: Immunoassay/methods*
  2. Assessment of heavy metals contamination in Mamut river sediments using sediment quality guidelines and geochemical indices
    Mohammad Ali BN, Lin CY, Cleophas F, Abdullah MH, Musta B
    Environ Monit Assess, 2015 Jan;187(1):4190.
    PMID: 25471626 DOI: 10.1007/s10661-014-4190-y
    This paper describes the concentration of selected heavy metals (Co, Cu, Ni, Pb, and Zn) in the Mamut river sediments and evaluate the degree of contamination of the river polluted by a disused copper mine. Based on the analytical results, copper showed the highest concentration in most of the river samples. A comparison with Interim Canadian Sediment Quality Guidelines (ICSQG) and Germany Sediment Quality Guidelines (GSQG) indicated that the sediment samples in all the sampling stations, except Mamut river control site (M1), exceeded the limit established for Cu, Ni, and Pb. On the contrary, Zn concentrations were reported well below the guidelines limit (ICSQG and GSQG). Mineralogical analysis indicated that the Mamut river sediments were primarily composed of quartz and accessory minerals such as chalcopyrite, pyrite, edenite, kaolinite, mica, and muscovite, reflected by the geological character of the study area. Enrichment factor (EF) and geoaccumulation index (Igeo) were calculated to evaluate the heavy metal pollution in river sediments. Igeo values indicated that all the sites were strongly polluted with the studied metals in most sampling stations, specifically those located along the Mamut main stream. The enrichment factor with value greater than 1.5 suggested that the source of heavy metals was mainly derived from anthropogenic activity such as mining. The degree of metal changes (δfold) revealed that Cu concentration in the river sediments has increased as much as 20 to 38 folds since the preliminary investigation conducted in year 2004.
    Matched MeSH terms: Environmental Monitoring/methods*
  3. Application of response surface methodology in optimization of electrospinning process to fabricate (ferrofluid/polyvinyl alcohol) magnetic nanofibers
    Ahmadipourroudposht M, Fallahiarezoudar E, Yusof NM, Idris A
    Mater Sci Eng C Mater Biol Appl, 2015 May;50:234-41.
    PMID: 25746266 DOI: 10.1016/j.msec.2015.02.008
    Magnetic nanofibers are composed of good dispersion of magnetic nanoparticles along an organic material. Magnetic nanofibers are potentially useful for composite reinforcement, bio-medical and tissue engineering. Nanofibers with the thinner diameter have to result in higher rigidity and tensile strength due to better alignments of lamellae along the fiber axis. In this study, the performance of electrospinning process was explained using response surface methodology (RSM) during fabrication of magnetic nanofibers using polyvinyl alcohol (PVA) as a shelter for (γ-Fe2O3) nanoparticles where the parameters investigated were flow rate, applied voltage, distance between needle and collector and collector rotating speed. The response variable was diameter distribution. The two parameters flow rate and applied voltage in primary evaluation were distinguished as significant factors. Central composite design was applied to optimize the variable of diameter distribution. Quadratic estimated model developed for diameter distribution indicated the optimum conditions to be flow rate of 0.25 ml/h at voltage of 45 kV while the distance and rotating speed are at 8 cm and 1500 rps respectively. The obtained model was verified successfully by the confirmation experiments.
    Matched MeSH terms: Tissue Engineering/methods*
  4. Combined transnasal and transoral endoscopic approach to a transsphenoidal encephalocele in an infant
    Tan SH, Mun KS, Chandran PA, Manuel AM, Prepageran N, Waran V, et al.
    Childs Nerv Syst, 2015 Jul;31(7):1165-9.
    PMID: 25712744 DOI: 10.1007/s00381-015-2667-9
    This paper reports an unusual case of a transsphenoidal encephalocele and discusses our experience with a minimally invasive management. To the best of our knowledge, we present the first case of a combined endoscopic transnasal and transoral approach to a transsphenoidal encephalocele in an infant.
    Matched MeSH terms: Endoscopy/methods*
  5. Determination of trans- and cis-urocanic acid in relation to histamine, putrescine, and cadaverine contents in tuna (Auxis Thazard) at different storage temperatures
    Zare D, Muhammad K, Bejo MH, Ghazali HM
    J Food Sci, 2015 Feb;80(2):T479-83.
    PMID: 25586500 DOI: 10.1111/1750-3841.12752
    Scombroid fish poisoning is usually associated with consumption of fish containing high levels of histamine. However, reports indicate that some cases have responded to antihistamine therapy while ingested histamine levels in these cases were low. Potentiation of histamine toxicity by some biogenic amines, and release of endogenous histamine by other compounds such as cis-urocanic acid (UCA) are some hypotheses that have been put forth to explain this anomaly. Very little is known about the effects of storage conditions on the production of both UCA isomers and biogenic amines in tuna. Thus, the production of trans- and cis-UCA, histamine, putrescine, and cadaverine in tuna during 15 d of storage at 0, 3, and 10 °C and 2 d storage at ambient temperature were monitored. The initial trans- and cis-UCA contents in fresh tuna were 2.90 and 1.47 mg/kg, respectively, whereas the levels of putrescine and cadaverine were less than 2 mg/kg, and histamine was not detected. The highest levels of trans- and cis-UCA were obtained during 15 d storage at 3 °C (23.74 and 21.79 mg/kg, respectively) while the highest concentrations of histamine (2796 mg/kg), putrescine (220.32 mg/kg) and cadaverine (1045.20 mg/kg) were obtained during storage at room temperature, 10 and 10 °C, respectively. Histamine content increased considerably during storage at 10 °C whereas trans- and cis-UCA contents changed slightly. The initial trans-UCA content decreased during storage at ambient temperature. Thus, unlike histamine, concentrations of trans- and cis-UCA did not result in elevated levels during storage of tuna.
    Matched MeSH terms: Food Storage/methods*
  6. Fulltext Relationship of treatment satisfaction to health-related quality of life: findings from a cross-sectional survey among hypertensive patients in Palestine
    Al-Jabi SW, Zyoud SH, Sweileh WM, Wildali AH, Saleem HM, Aysa HA, et al.
    Health Expect, 2015 Dec;18(6):3336-48.
    PMID: 25484002 DOI: 10.1111/hex.12324
    BACKGROUND: Evaluation of the association between treatment satisfaction and health-related quality of life (HRQoL) may enable health-care providers to understand the issues that influence quality of life and to recognize the aspects of hypertension treatment that need improvement to enhance the long-term treatment outcomes.

    OBJECTIVE: The aim of this study was to determine the relationship between HRQoL and treatment satisfaction in a sample of Palestinian hypertensive patients.

    METHODS: A cross-sectional study was conducted, adopting the Treatment Satisfaction Questionnaire for Medication (TSQM 1.4) for the assessment of treatment satisfaction and using the European Quality of Life scale (EQ-5D-5L) for the assessment of HRQoL. Descriptive and comparative statistics were used to describe socio-demographic and disease-related characteristics of the patients. All analyses were performed using SPSS v 15.0.

    RESULTS: Four hundred and ten hypertensive patients were enrolled in the study. This study findings indicate a positive correlation between all satisfaction domains and HRQoL. Significant differences were observed between this study variables (P < 0.001). After adjustment for covariates using multiple linear regression, an increase of one point in the global satisfaction scale was associated with a 0.16 increase in EQ-5D index scores (r = 0.16; P < 0.001).

    CONCLUSIONS: Patients with reportedly higher satisfaction scores have reported relatively higher EQ-5D-5L index values. These study findings could be helpful in clinical practice, mainly in the early treatment of hypertensive patients, at a point where improving treatment satisfaction and HRQoL is still possible.

    Matched MeSH terms: Psychometrics/methods
  7. Acclimatisation-induced stress influenced host metabolic and gut microbial composition change
    Yap IK, Kho MT, Lim SH, Ismail NH, Yam WK, Chong CW
    Mol Biosyst, 2015 Jan;11(1):297-306.
    PMID: 25382376 DOI: 10.1039/c4mb00463a
    Understanding the basal gut bacterial community structure and the host metabolic composition is pivotal for the interpretation of laboratory treatments designed to answer questions pertinent to host-microbe interactions. In this study, we report for the first time the underlying gut microbiota and systemic metabolic composition in BALB/c mice during the acclimatisation period. Our results showed that stress levels were reduced in the first three days of the study when the animals were subjected to repetitive handling daily but the stress levels were increased when handling was carried out at lower frequencies (weekly). We also observed a strong influence of stress on the host metabolism and commensal compositional variability. In addition, temporal biological compartmental variations in the responses were observed. Based on these results, we suggest that consistency in the frequency and duration of laboratory handling is crucial in murine models to minimise the impact of stress levels on the commensal and host metabolism dynamics. Furthermore, caution is advised in consideration of the temporal delay effect when integrating metagenomics and metabonomics data across different biological matrices (i.e. faeces and urine).
    Matched MeSH terms: Metabolomics/methods
  8. A case of nasal chromoblastomycosis causing epistaxis
    Penjor D, Khizuan AK, Chong AW, Wong KT
    J Laryngol Otol, 2014 Dec;128(12):1117-9.
    PMID: 25382114 DOI: 10.1017/S0022215114002655
    Chromoblastomycosis is a chronic fungal infection of the skin and subcutaneous tissue that most commonly affects the feet and lower limbs. It is rare for this infection to occur on the face, and it is exceptionally rare for it to involve the nose and sinuses. This paper reports a rare case of nasal chromoblastomycosis in a 50-year-old Malaysian male.
    Matched MeSH terms: Endoscopy/methods
  9. Fulltext Evaluation of commercially available diagnostic tests for the detection of dengue virus NS1 antigen and anti-dengue virus IgM antibody
    Hunsperger EA, Yoksan S, Buchy P, Nguyen VC, Sekaran SD, Enria DA, et al.
    PLoS Negl Trop Dis, 2014 Oct;8(10):e3171.
    PMID: 25330157 DOI: 10.1371/journal.pntd.0003171
    Commercially available diagnostic test kits for detection of dengue virus (DENV) non-structural protein 1 (NS1) and anti-DENV IgM were evaluated for their sensitivity and specificity and other performance characteristics by a diagnostic laboratory network developed by World Health Organization (WHO), the UNICEF/UNDP/World Bank/WHO Special Programme for Research and Training in Tropical Diseases (TDR) and the Pediatric Dengue Vaccine Initiative (PDVI). Each network laboratory contributed characterized serum specimens for the panels used in the evaluation. Microplate enzyme-linked immunosorbent assay (ELISA) and rapid diagnostic test (RDT formats) were represented by the kits. Each ELISA was evaluated by 2 laboratories and RDTs were evaluated by at least 3 laboratories. The reference tests for IgM anti-DENV were laboratory developed assays produced by the Armed Forces Research Institute for Medical Science (AFRIMS) and the Centers for Disease Control and Prevention (CDC), and the NS1 reference test was reverse transcriptase polymerase chain reaction (RT-PCR). Results were analyzed to determine sensitivity, specificity, inter-laboratory and inter-reader agreement, lot-to-lot variation and ease-of-use. NS1 ELISA sensitivity was 60-75% and specificity 71-80%; NS1 RDT sensitivity was 38-71% and specificity 76-80%; the IgM anti-DENV RDTs sensitivity was 30-96%, with a specificity of 86-92%, and IgM anti-DENV ELISA sensitivity was 96-98% and specificity 78-91%. NS1 tests were generally more sensitive in specimens from the acute phase of dengue and in primary DENV infection, whereas IgM anti-DENV tests were less sensitive in secondary DENV infections. The reproducibility of the NS1 RDTs ranged from 92-99% and the IgM anti-DENV RDTs from 88-94%.
    Matched MeSH terms: Enzyme-Linked Immunosorbent Assay/methods
  10. Gender and modulation frequency effects on auditory steady state response (ASSR) thresholds
    Zakaria MN, Jalaei B, Wahab NA
    Eur Arch Otorhinolaryngol, 2016 Feb;273(2):349-54.
    PMID: 25682179 DOI: 10.1007/s00405-015-3555-3
    For estimating behavioral hearing thresholds, auditory steady state response (ASSR) can be reliably evoked by stimuli at low and high modulation frequencies (MFs). In this regard, little is known regarding ASSR thresholds evoked by stimuli at different MFs in female and male participants. In fact, recent data suggest that 40-Hz ASSR is influenced by estrogen level in females. Hence, the aim of the present study was to determine the effect of gender and MF on ASSR thresholds in young adults. Twenty-eight normally hearing participants (14 males and 14 females) were enrolled in this study. For each subject, ASSR thresholds were recorded with narrow-band chirps at 500, 1,000, 2,000, and 4,000 Hz carrier frequencies (CFs) and at 40 and 90 Hz MFs. Two-way mixed ANOVA (with gender and MF as the factors) revealed no significant interaction effect between factors at all CFs (p > 0.05). The gender effect was only significant at 500 Hz CF (p < 0.05). At 500 and 1,000 Hz CFs, mean ASSR thresholds were significantly lower at 40 Hz MF than at 90 Hz MF (p < 0.05). Interestingly, at 2,000 and 4,000 Hz CFs, mean ASSR thresholds were significantly lower at 90 Hz MF than at 40 Hz MF (p < 0.05). The lower ASSR thresholds in females might be due to hormonal influence. When recording ASSR thresholds at low MF, we suggest the use of gender-specific normative data so that more valid comparisons can be made, particularly at 500 Hz CF.
    Matched MeSH terms: Acoustic Stimulation/methods*
  11. Changes in emotional distress, short term memory, and sustained attention following 6 and 12 sessions of progressive muscle relaxation training in 10-11 years old primary school children
    Hashim HA, Zainol NA
    Psychol Health Med, 2015;20(5):623-8.
    PMID: 25603900 DOI: 10.1080/13548506.2014.1002851
    This study compared the effects of 6 and 12 sessions of relaxation training on emotional distress, short-term memory, and sustained attention in primary school children.
    Matched MeSH terms: Autogenic Training/methods*
  12. Chiral separation of four stereoisomers of ketoconazole drugs using capillary electrophoresis
    Wan Ibrahim WA, Arsad SR, Maarof H, Sanagi MM, Aboul-Enein HY
    Chirality, 2015 Mar;27(3):223-7.
    PMID: 25523071 DOI: 10.1002/chir.22416
    This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6-tri-O-methyl)-β-cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10 mM phosphate buffer at pH 2.5 containing 20 mM TMβCD, 5 mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5-s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively.
    Matched MeSH terms: Electrophoresis, Capillary/methods*
  13. Preliminary observation on the effect of baking soda volume on controlling odour from discarded organic waste
    Qamaruz-Zaman N, Kun Y, Rosli RN
    Waste Manag, 2015 Jan;35:187-90.
    PMID: 25445259 DOI: 10.1016/j.wasman.2014.09.017
    Food wastes with high moisture and organic matter content are likely to emit odours as a result of the decomposition process. The management of odour from decomposing wastes is needed to sustain the interest of residents and local councils in the source separation of kitchen wastes. This study investigated the potential of baking soda (at 50 g, 75 g and 100g per kg food waste) to control odour from seven days stored food waste. It was found that 50 g of baking soda, spread at the bottom of 8l food wastes bin, can reduce the odour by about 70%. A higher amount (above 100g) is not advised as a pH higher than 9.0 may be induced leading to the volatilization of odorous ammonia. This research finding is expected to benefit the waste management sector, food processing industries as well as the local authorities where malodour from waste storage is a pressing issue.
    Matched MeSH terms: Waste Management/methods*
  14. Adsorption of 2,4-dichlorophenoxyacetic acid by mesoporous activated carbon prepared from H3PO4-activated langsat empty fruit bunch
    Njoku VO, Islam MA, Asif M, Hameed BH
    J Environ Manage, 2015 May 1;154:138-44.
    PMID: 25721981 DOI: 10.1016/j.jenvman.2015.02.002
    The removal of toxic herbicide from wastewater is challenging due to the availability of suitable adsorbents. The Langsat empty fruit bunch is an agricultural waste and was used in this study as a cheap precursor to produce activated carbon for the adsorption of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) at different initial concentrations ranging from 50 to 400 mg/L. The produced Langsat empty fruit bunch activated carbon (LEFBAC) was mesoporous and had high surface area of 1065.65 m(2)/g with different active functional groups. The effect of shaking time, temperature and pH on 2,4-D removal were investigated using the batch technique. The adsorption capacity of 2,4-D by LEFBAC was decreased with increase in pH of solution whereas adsorption capacity increased with temperature. The adsorption data was well described by Langmuir isotherm followed by removal capacity of 261.2 mg/g at 30 °C. The results from this work showed that LEFBAC can be used as outstanding material for anionic herbicide uptake from wastewater.
    Matched MeSH terms: Water Purification/methods*
  15. Removal performance of elemental mercury by low-cost adsorbents prepared through facile methods of carbonisation and activation of coconut husk
    Johari K, Alias AS, Saman N, Song ST, Mat H
    Waste Manag Res, 2015 Jan;33(1):81-8.
    PMID: 25492720 DOI: 10.1177/0734242X14562660
    The preparation of chars and activated carbon as low-cost elemental mercury adsorbents was carried out through the carbonisation of coconut husk (pith and fibre) and the activation of chars with potassium hydroxide (KOH), respectively. The synthesised adsorbents were characterised by using scanning electron microscopy, Fourier transform infrared spectroscopy and nitrogen adsorption/desorption analysis. The elemental mercury removal performance was measured using a conventional flow type packed-bed adsorber. The physical and chemical properties of the adsorbents changed as a result of the carbonisation and activation process, hence affecting on the extent of elemental mercury adsorption. The highest elemental mercury (Hg°) adsorption capacity was obtained for the CP-CHAR (3142.57 µg g(-1)), which significantly outperformed the pristine and activated carbon adsorbents, as well as higher than some adsorbents reported in the literature.
    Matched MeSH terms: Waste Management/methods*
  16. Immobilization of β-glucosidase from Aspergillus niger on κ-carrageenan hybrid matrix and its application on the production of reducing sugar from macroalgae cellulosic residue
    Tan IS, Lee KT
    Bioresour Technol, 2015 May;184:386-94.
    PMID: 25465785 DOI: 10.1016/j.biortech.2014.10.146
    A novel concept for the synthesis of a stable polymer hybrid matrix bead was developed in this study. The beads were further applied for enzyme immobilization to produce stable and active biocatalysts with low enzyme leakage, and high immobilization efficiency, enzyme activity, and recyclability. The immobilization conditions, including PEI concentration, activation time and pH of the PEI solution were investigated and optimized. All formulated beads were characterized for its functionalized groups, composition, surface morphology and thermal stability. Compared with the free β-glucosidase, the immobilized β-glucosidase on the hybrid matrix bead was able to tolerate broader range of pH values and higher reaction temperature up to 60 °C. The immobilized β-glucosidase was then used to hydrolyse pretreated macroalgae cellulosic residue (MCR) for the production of reducing sugar and a hydrolysis yield of 73.4% was obtained. After repeated twelve runs, immobilized β-glucosidase retained about 75% of its initial activity.
    Matched MeSH terms: Biotechnology/methods*
  17. Fulltext Development and characterization of poly(1-vinylpyrrolidone-co-vinyl acetate) copolymer based polymer electrolytes
    Sa'adun NN, Subramaniam R, Kasi R
    ScientificWorldJournal, 2014;2014:254215.
    PMID: 25431781 DOI: 10.1155/2014/254215
    Gel polymer electrolytes (GPEs) are developed using poly(1-vinylpyrrolidone-co-vinyl acetate) [P(VP-co-VAc)] as the host polymer, lithium bis(trifluoromethane) sulfonimide [LiTFSI] as the lithium salt and ionic liquid, and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [EMImTFSI] by using solution casting technique. The effect of ionic liquid on ionic conductivity is studied and the optimum ionic conductivity at room temperature is found to be 2.14 × 10(-6) S cm(-1) for sample containing 25 wt% of EMImTFSI. The temperature dependence of ionic conductivity from 303 K to 353 K exhibits Arrhenius plot behaviour. The thermal stability of the polymer electrolyte system is studied by using thermogravimetric analysis (TGA) while the structural and morphological properties of the polymer electrolyte is studied by using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction analysis (XRD), respectively.
    Matched MeSH terms: Spectroscopy, Fourier Transform Infrared/methods
  18. Fulltext Examination of the factor structure of the Schizotypal Personality Questionnaire among British and Trinidadian adults
    Barron D, Swami V, Towell T, Hutchinson G, Morgan KD
    Biomed Res Int, 2015;2015:258275.
    PMID: 25699263 DOI: 10.1155/2015/258275
    Much debate in schizotypal research has centred on the factor structure of the Schizotypal Personality Questionnaire (SPQ), with research variously showing higher-order dimensionality consisting of two to seven dimensions. In addition, cross-cultural support for the stability of those factors remains limited. Here, we examined the factor structure of the SPQ among British and Trinidadian adults. Participants from a White British subsample (n = 351) resident in the UK and from an African Caribbean subsample (n = 284) resident in Trinidad completed the SPQ. The higher-order factor structure of the SPQ was analysed through confirmatory factor analysis, followed by multiple-group analysis for the model of best fit. Between-group differences for sex and ethnicity were investigated using multivariate analysis of variance in relation to the higher-order domains. The model of best-fit was the four-factor structure, which demonstrated measurement invariance across groups. Additionally, these data had an adequate fit for two alternative models: (a) 3-factor and (b) modified 4-factor model. The British subsample had significantly higher scores across all domains than the Trinidadian group, and men scored significantly higher on the disorganised domain than women. The four-factor structure received confirmatory support and, importantly, support for use with populations varying in ethnicity and culture.
    Matched MeSH terms: Psychometrics/methods
  19. Fulltext Global genome comparative analysis reveals insights of resistome and life-style adaptation of Pseudomonas putida strain T2-2 in oral cavity
    Chan XY, Chua KO, How KY, Yin WF, Chan KG
    ScientificWorldJournal, 2014;2014:930727.
    PMID: 25436236 DOI: 10.1155/2014/930727
    Most Pseudomonas putida strains are environmental microorganisms exhibiting a wide range of metabolic capability but certain strains have been reported as rare opportunistic pathogens and some emerged as multidrug resistant P. putida. This study aimed to assess the drug resistance profile of, via whole genome analysis, P. putida strain T2-2 isolated from oral cavity. At the same time, we also compared the nonenvironmental strain with environmentally isolated P. putida. In silico comparative genome analysis with available reference strains of P. putida shows that T2-2 has lesser gene counts on carbohydrate and aromatic compounds metabolisms, which suggested its little versatility. The detection of its edd gene also suggested T2-2's catabolism of glucose via ED pathway instead of EMP pathway. On the other hand, its drug resistance profile was observed via in silico gene prediction and most of the genes found were in agreement with drug-susceptibility testing in laboratory by automated VITEK 2. In addition, the finding of putative genes of multidrug resistance efflux pump and ATP-binding cassette transporters in this strain suggests a multidrug resistant phenotype. In summary, it is believed that multiple metabolic characteristics and drug resistance in P. putida strain T2-2 helped in its survival in human oral cavity.
    Matched MeSH terms: Comparative Genomic Hybridization/methods*
  20. Fulltext Comparison of various functionally graded femoral prostheses by finite element analysis
    Oshkour AA, Talebi H, Shirazi SF, Bayat M, Yau YH, Tarlochan F, et al.
    ScientificWorldJournal, 2014;2014:807621.
    PMID: 25302331 DOI: 10.1155/2014/807621
    This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent.
    Matched MeSH terms: Prosthesis Design/methods*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links