Displaying publications 41 - 60 of 215 in total

Abstract:
Sort:
  1. Sarimin AS, Ghaffar MA, Mohamed CA
    Pak J Biol Sci, 2009 Feb 01;12(3):231-8.
    PMID: 19579951
    A study on elemental composition in the otolith of giant mudskipper, Periophthalmodon schlosseri, was done from June to October 2003. Specimens were obtained from the mangrove areas of Kuala Selangor, Sepang and Melaka in the west coast of Peninsular Malaysia. A total of 70 sagitta otoliths were analyzed to detect variation of Sr, Ba and Mg, replacing the natural chemical composition of the otolith, which is the calcium carbonate (CaCO3). The average ratio of Sr:Ca was 0.11 x 10(-4), Ba:Ca was 5.7 x 10(-3) and Mg:Ca was 0.2 x 10(-3). Strong correlation (R > 0.8) between fish body size and otolith weight ofmudskipper (p < 0.01) also found during this study.
    Matched MeSH terms: Magnesium/analysis*
  2. Rahman NA, Olutoye MA, Hameed BH
    Bioresour Technol, 2011 Oct;102(20):9749-54.
    PMID: 21855332 DOI: 10.1016/j.biortech.2011.07.023
    The potential of Mg(x)Co(2-)(x)O(2) as heterogeneous reusable catalyst in transesterification of palm oil to methyl ester was investigated. The catalyst was prepared via co-precipitation of the metal hydroxides at different Mg-Co ratios. Mg(1.7)Co(0.3)O(2) catalyst was more active than Mg(0.3)Co(1.7)O(2) in the transesterification of palm oil with methanol. The catalysts calcined at temperature 300 °C for 4 h resulted in highly active oxides and the highest transesterification of 90% was achieved at methanol/oil molar ratio of 9:1, catalyst loading of 5.00 wt.%, reaction temperature of 150 °C and reaction time of 2 h. The catalyst could easily be removed from reaction mixture, but showed 50% decrease in activity when reused due to leaching of active sites.
    Matched MeSH terms: Magnesium Oxide/chemistry*
  3. Ho JJ, Rasa G
    Cochrane Database Syst Rev, 2007 Jul 18;2007(3):CD005588.
    PMID: 17636807
    BACKGROUND: Persistent pulmonary hypertension of the newborn (PPHN) occurs in approximately 1.9 per 1000 newborns and may be more frequent in developing countries. There is strong evidence for the use of inhaled nitric oxide (iNO) and extra corporeal membrane oxygenation (ECMO) in the treatment of PPHN. However, many developing countries do not have access or the technical expertise required for these expensive therapies. Magnesium sulfate is a potent vasodilator and hence has the potential to reduce the high pulmonary arterial pressures associated with PPHN. If magnesium sulfate were found to be effective in the treatment of PPHN, this could be a cost effective and potentially life-saving therapy.

    OBJECTIVES: To evaluate the use of magnesium sulfate compared with placebo or standard ventilator management alone, sildenafil infusion, adenosine infusion, or inhaled nitric oxide on mortality or the use of backup iNO or ECMO in term and near-term newborns (> 34 weeks gestational age) with PPHN.

    SEARCH STRATEGY: The standard search strategy of the Cochrane Neonatal Review Group (CNRG) was used. No language restrictions was applied. The Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library, Issue 1, 2006) and MEDLINE (1966 to April 20, 2007) were searched for relevant randomized and quasi-randomized trials. In addition the reference lists of retrieved articles were reviewed and known experts were contacted to obtain unpublished data.

    SELECTION CRITERIA: All randomised or quasi-random studies were eligible where one of the treatment groups received magnesium sulfate for PPHN.

    DATA COLLECTION AND ANALYSIS: Standard methods of the Cochrane Collaboration and the CNRG were used, including independent assessment of trial quality and extraction of data by each author.

    MAIN RESULTS: No eligible trials were found

    AUTHORS' CONCLUSIONS: On the basis of the current lack of evidence, the use of magnesium sulphate cannot be recommended in the treatment of PPHN. Randomised controlled trials are recommended.

    Matched MeSH terms: Magnesium Sulfate/therapeutic use*
  4. Lim SL, Wu TY
    J Agric Food Chem, 2016 Mar 2;64(8):1761-9.
    PMID: 26844586 DOI: 10.1021/acs.jafc.6b00531
    The valorization process involves transforming low-value materials such as wastes into high-value-added products. The current study aims to determine the potential of using a valorization process such as vermicomposting technology to convert palm oil mill byproduct, namely, decanter cake (DC), into organic fertilizer or vermicompost. The maturity of the vermicompost was characterized through various chemical and instrumental characterization to ensure the end product was safe and beneficial for agricultural application. The vermicomposting of DC showed significantly higher nutrient recovery and decreases in C:N ratio in comparison with the controls, particularly in the treatment with 2 parts DC and 1 part rice straw (w/w) (2DC:1RS). 2DC:1RS vermicompost had a final C:N ratio of 9.03 ± 0.12 and reasonably high levels of calcium (1.13 ± 0.05 g/kg), potassium (25.47 ± 0.32 g/kg), magnesium (4.87 ± 0.19 g/kg), sodium (7.40 ± 0.03 g/kg), and phosphorus (3.62 ± 0.27 g/kg). In addition, instrumental characterization also revealed a higher degree of maturity in the vermicompost. Ratios of 2921:1633 and DTG2:DTG3 also showed significant linear correlations with the C:N ratio, implying that those ratios could be used to characterize the progression of vermicompost maturity during the valorization process of DC.
    Matched MeSH terms: Magnesium/analysis
  5. Maleki-Ghaleh H, Hafezi M, Hadipour M, Nadernezhad A, Aghaie E, Behnamian Y, et al.
    PLoS One, 2015;10(9):e0138454.
    PMID: 26383641 DOI: 10.1371/journal.pone.0138454
    In the current study, a sol-gel-synthesized tricalcium magnesium silicate powder was coated on Ti-6Al-4V alloys using plasma spray method. Composition of feed powder was evaluated by X-ray diffraction technique before and after the coating process. Scanning electron microscopy and atomic force microscopy were used to study the morphology of coated substrates. The corrosion behaviors of bare and coated Ti-6Al-4V alloys were examined using potentiodynamic polarization test and electrochemical impedance spectroscopy in stimulated body fluids. Moreover, bare and coated Ti-6Al-4V alloys were characterized in vitro by culturing osteoblast and mesenchymal stem cells for several days. Results demonstrated a meaningful improvement in the corrosion resistance of Ti-6Al-4V alloys coated with tricalcium magnesium silicate compared with the bare counterparts, by showing a decrease in corrosion current density from 1.84 μA/cm2 to 0.31 μA/cm2. Furthermore, the coating substantially improved the bioactivity of Ti-6Al-4Valloys. Our study on corrosion behavior and biological response of Ti-6Al-4V alloy coated by tricalcium magnesium silicate proved that the coating has considerably enhanced safety and applicability of Ti-6Al-4V alloys, suggesting its potential use in permanent implants and artificial joints.
    Matched MeSH terms: Magnesium/chemistry*
  6. Ni H, Aye SZ, Naing C
    Cochrane Database Syst Rev, 2022 May 26;5(5):CD013506.
    PMID: 35616126 DOI: 10.1002/14651858.CD013506.pub2
    BACKGROUND: Chronic obstructive pulmonary disease (COPD) is a chronic and progressive disease, often punctuated by recurrent flare-ups or exacerbations. Magnesium sulfate, having a bronchodilatory effect, may have a potential role as an adjunct treatment in COPD exacerbations. However, comprehensive evidence of its effects is required to facilitate clinical decision-making.

    OBJECTIVES: To assess the effects of magnesium sulfate for acute exacerbations of chronic obstructive pulmonary disease in adults.

    SEARCH METHODS: We searched the Cochrane Airways Trials Register, CENTRAL, MEDLINE, Embase, ClinicalTrials.gov, the World Health Organization (WHO) trials portal, EU Clinical Trials Register and Iranian Registry of Clinical Trials. We also searched the proceedings of major respiratory conferences and reference lists of included studies up to 2 August 2021.

    SELECTION CRITERIA: We included single- or double-blind parallel-group randomised controlled trials (RCTs) assessing magnesium sulfate in adults with COPD exacerbations. We excluded cross-over trials.

    DATA COLLECTION AND ANALYSIS: We used standard methodological procedures expected by Cochrane. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias. The primary outcomes were: hospital admissions (from the emergency room); need for non-invasive ventilation (NIV), assisted ventilation or admission to intensive-care unit (ICU); and serious adverse events. Secondary outcomes were: length of hospital stay, mortality, adverse events, dyspnoea score, lung function and blood gas measurements. We assessed confidence in the evidence using GRADE methodology. For missing data, we contacted the study investigators.

    MAIN RESULTS: We identified 11 RCTs (10 double-blind and 1 single-blind) with a total 762 participants. The mean age of participants ranged from 62 to 76 years. Trials were single- or two-centre trials conducted in Iran, New Zealand, Nepal, Turkey, the UK, Tunisia and the USA between 2004 and 2018. We judged studies to be at low or unclear risk of bias for most of the domains. Three studies were at high risk for blinding and other biases.  Intravenous magnesium sulfate versus placebo Seven studies (24 to 77 participants) were included. Fewer people may require hospital admission with magnesium infusion compared to placebo (odds ratio (OR) 0.45, 95% CI 0.23 to 0.88; number needed to treat for an additional beneficial outcome (NNTB) = 7; 3 studies, 170 participants; low-certainty evidence). Intravenous magnesium may result in little to no difference in the requirement for non-invasive ventilation (OR 0.74, 95% CI 0.31 to 1.75; very low-certainty evidence). There were no reported cases of endotracheal intubation (2 studies, 107 participants) or serious adverse events (1 study, 77 participants) in either group. Included studies did not report intensive care unit (ICU) admission or deaths. Magnesium infusion may reduce the length of hospital stay by a mean difference (MD) of 2.7 days (95% CI 4.73 days to 0.66 days; 2 studies, 54 participants; low-certainty evidence) and improve dyspnoea score by a standardised mean difference of -1.40 (95% CI -1.83 to -0.96; 2 studies, 101 participants; low-certainty evidence). We were uncertain about the effect of magnesium infusion on improving lung function or oxygen saturation. For all adverse events, the Peto OR was 0.14 (95% CI 0.02 to 1.00; 102 participants); however, the event rate was too low to reach a robust conclusion.  Nebulised magnesium sulfate versus placebo Three studies (20 to 172 participants) were included. Magnesium inhalation may have little to no impact on hospital admission (OR 0.77, 95% CI 0.21 to 2.82; very low-certainty evidence) or need for ventilatory support (NIV or mechanical ventilation) (OR 0.33, 95% CI 0.01 to 8.20; very low-certainty evidence). It may result in fewer ICU admissions compared to placebo (OR 0.39, 95% CI 0.15 to 1.00; very low-certainty evidence) and improvement in dyspnoea (MD -14.37, 95% CI -26.00 to -2.74; 1 study, 20 participants; very low-certainty evidence). There were no serious adverse events reported in either group. There was one reported death in the placebo arm in one trial, but the number of participants was too small for a conclusion. There was limited evidence about the effect of magnesium inhalation on length of hospital stay, lung function outcomes or oxygen saturation. Included studies did not report adverse events.  Magnesium sulfate versus ipratropium bromide  A single study with 124 participants assessed nebulised magnesium sulfate plus intravenous magnesium infusion versus nebulised ipratropium plus intravenous normal saline. There was little to no difference between these groups in terms of hospital admission (OR 1.62, 95% CI 0.78 to 3.37), endotracheal intubation (OR 1.69, 95% CI 0.61 to 4.71) and length of hospital stay (MD 1.10 days, 95% CI -0.22 to 2.42), all with very low-certainty evidence. There were no data available for non-invasive ventilation, ICU admission and serious adverse events. Adverse events were not reported.  AUTHORS' CONCLUSIONS: Intravenous magnesium sulfate may be associated with fewer hospital admissions, reduced length of hospital stay and improved dyspnoea scores compared to placebo. There is no evidence of a difference between magnesium infusion and placebo for NIV, lung function, oxygen saturation or adverse events. We found no evidence for ICU admission, endotracheal intubation, serious adverse events or mortality. For nebulised magnesium sulfate, we are unable to draw conclusions about its effects in COPD exacerbations for most of the outcomes. Studies reported possibly lower ICU admissions and a lesser degree of dyspnoea with magnesium inhalation compared to placebo; however, larger studies are required to yield a more precise estimate for these outcomes. Similarly, we could not identify any robust evidence for magnesium sulfate compared to ipratropium bromide. Future well-designed multicentre trials with larger samples are required, including subgroups according to severity of exacerbations and COPD phenotypes.

    Matched MeSH terms: Magnesium/therapeutic use
  7. Nezhad NG, Jamaludin SZB, Rahman RNZRA, Yahaya NM, Oslan SN, Shariff FM, et al.
    World J Microbiol Biotechnol, 2024 Apr 17;40(6):171.
    PMID: 38630327 DOI: 10.1007/s11274-024-03970-8
    A histidine acid phosphatase (HAP) (PhySc) with 99.50% protein sequence similarity with PHO5 from Saccharomyces cerevisiae was expressed functionally with the molecular mass of ∼110 kDa through co-expression along with the set of molecular chaperones dnaK, dnaJ, GroESL. The purified HAP illustrated the optimum activity of 28.75 ± 0.39 U/mg at pH 5.5 and 40 ˚C. The Km and Kcat values towards calcium phytate were 0.608 ± 0.09 mM and 650.89 ± 3.6 s- 1. The half-lives (T1/2) at 55 and 60 ˚C were 2.75 min and 55 s, respectively. The circular dichroism (CD) demonstrated that PhySc includes 30.5, 28.1, 21.3, and 20.1% of random coils, α-Helix, β-Turns, and β-Sheet, respectively. The Tm recorded by CD for PhySc was 56.5 ± 0.34˚C. The molecular docking illustrated that His59 and Asp322 act as catalytic residues in the PhySc. MD simulation showed that PhySc at 40 ˚C has higher structural stability over those of the temperatures 60 and 80 ˚C that support the thermodynamic in vitro investigations. Secondary structure content results obtained from MD simulation indicated that PhySc consists of 34.03, 33.09, 17.5, 12.31, and 3.05% of coil, helix, turn, sheet, and helix310, respectively, which is almost consistent with the experimental results.
    Matched MeSH terms: Magnesium*
  8. Che Aziz Ali, Kamal Roslan Mohamed
    Sains Malaysiana, 1996;25(4):47-68.
    The Kodiang Formation which outcrops in Kodiang and Alor Setar areas has been well studied and documented. Various geological aspects of the limestone formation have been reported in detail including its stratigraphy, sequence startigraphy, sedimentology and paleontology. Diagenetic aspect of this rock formation, however, had not been specifically discussed before. The Kodiang limestone has undergone a complicated diagenetic history which started immediately after the sediments were laid down on the sea bed. Various diagenetic products have been identified including, early marine cement, meteoric cement, and deeper subsurface cement. The diagenetic features identified are as follows; Fibrous calcite cement, sparry and poikilotopic calcites, calcite overgrowth, dolomite, silica cements and evaporites. Close examination at outcrops shows that dolomite occurs at several levels in the sequence. Their systematic occurrences can be correlated across the area. Petrographic studies show that dolomite occurs in several modes as stratified dolomite and as non-stratified dolomite. The two dolomite groups are attributed to two phases of dolomitizations. The stratified dolomites are interpreted to have been formed early in the limestone diagenetic history. The non-stratified dolomite type is, however, attributed to dolomitization during deep burial under the control of deeper subsurface physico-chemical conditions.
    Batu Kapur Kodiang yang tersingkap di Kodiang dan Alor Setar telah banyak dikaji dan didokumentasikan. Berbagai aspek geologi formasi batu kapur ini telah dilaporkan termasuk stratigrafi, startigrafi jujukan, sedimentologi dan paleontologi. Walau bagaimanapun aspek diagenesis formasi batuan ini tidak pernah dibincangkan secara khusus. Batu kapur Kodiang ini telah melalui sejarah diagenesis yang rumit yang bermula sebaik saja sedimen dimendapkan di atas permukaan dasar laut. Berbagai hasil diagenesis telah dikenal pasti termasuk penyimenan samudera awal, penyimenan meterorik dan penyimenan di bawah permukaan yang lebih dalam. Secara asas fitur-fitur yang dikenalpasti adalah seperti berikut; simen kalsit berserat, kalsit spar dan poikilotopik, tumbuhlampau kalsit, dolomit, simen silika dan evaporit. Pemeriksaan rapi pada singkapan menunjukkan dolomit hadir pada beberapa aras di dalam jujukan. Kehadirannya secara bersistematik boleh dikorelasikan pada setiap singkapan. Kajian petrografi menunjukkan dolomit wujud dalam berbagai mod yang boleh diklaskan sebagai dolomit berstrata dan dolomit tidak berstrata. Dua klas ini boleh dikaitkan dengan dua fasa pendolomitan. Dolomit berstrata ditafsirkan telah terbentuk awal di dalam sejarah diagenesis batu kapur. Dolomit tidak berstrata pula dikaitkan dengan pendolomitan semasa timbusan dalam di bawah keadaan fiziko-kimia bawah permukaan.
    Matched MeSH terms: Magnesium
  9. Ahmad Zaharin Aris, Mohd Harun Abdullah, Praveena SM
    Groundwater is the prime source of freshwater in most small islands. A detailed groundwater and seawater chemistry study was undertaken from March 2006 to January 2007 to examine the evolution of groundwater in the shallow aquifer of Manukan Island, Sabah, Malaysia. Coastal groundwater aquifers especially for small islands are often exposed to heavy pumping and consequently to risks of seawater intrusion. Major ion chemistry analysis showed that the groundwater quality of the island experienced changes attributed to seawater intrusion. The groundwater has undergone a compositional change from Ca-rich to Na-rich which can be explained mostly by simple mixing process and cation exchange process. From the PHREEQC simulation model, calcite, dolomite and aragonite solubility showed positive mean values (0.65; 1.11; 0.51, respectively) of the saturation indices (SI) indicating supersaturation which attributed from the simple mixing and eventually cation exchange process. This information is important in protecting and remediating the disturbed aquifer situation.
    Matched MeSH terms: Magnesium
  10. Hua Yang, Jinhua Fu, Yujiang Shi, Yumei Cheng, Haitao Zhang, Zhiqiang Mao, et al.
    Sains Malaysiana, 2016;45:9-18.
    The origin of formation water salinity variation in Chang 9 stratum, Jiyuan oilfield, Ordos basin is studied here. 91 formation water samples show that water salinity is characterized by a wide range and a complex plane distribution. In order to find out the main cause of such distribution complexity and reveal the relationship between formation water and evolution of reservoir traps, core data, chemical analysis result of formation water and log data are analyzed from perspectives of diagenesis and tectonism. And then, their characteristics are presented as the followings. In high salinity area, tuffaceous mudstone interlayer is found growing. Besides, the condition of Na++K+ is opposite to that of Ca2+, for its rate of concentration increase slows down with total salinity accumulating. In low salinity area, while, with fracture and faults developing, some formation water of CaCl2 type turns into MgCl2, NaHCO3 or Na2SO4 type. The cause is thus proposed to be composed of two aspects. One covers tuff alteration and later diagenesis for the high salinity. To be specific, montmorillonite, developed from tuff alteration, absorbs cation selectively and then ions migrate, during which more Na++K+ get lost, while more Ca2+ reserved. Afterwards, those reserved Ca2+ get released with montmorillonite transforming to illite, which results in a loss of Na++K+ and accumulation of Ca2+. Lots of ions are released into formation water during that process and later diagenetic process, which leads to the high water salinity. The other aspect is the development of faults and fractures, through which, the upper low salinity formation water gets connected. And that is the main cause of low salinity. At last, geological significance is discussed from two angles. Firstly, tuff alteration and later diagenesis are pivotal to reservoir reconstruction; and secondly, faults and fractures play an important role in oil transportation and storage.
    Matched MeSH terms: Magnesium Chloride
  11. Zubbri NA, Mohamed AR, Kamiuchi N, Mohammadi M
    Environ Sci Pollut Res Int, 2020 Apr;27(11):11809-11829.
    PMID: 31975005 DOI: 10.1007/s11356-020-07734-3
    This work is scrutinizing the development of metallized biochar as a low-cost bio-sorbent for low temperature CO2 capture with high adsorption capacity. Accordingly, single-step pyrolysis process was carried out in order to synthesize biochar from rambutan peel (RP) at different temperatures. The biochar product was then subjected to wet impregnation with several magnesium salts including magnesium nitrate, magnesium sulphate, magnesium chloride and magnesium acetate which then subsequently heat-treated with N2. The impregnation of magnesium into the biochar structure improved the CO2 capture performance in the sequence of magnesium nitrate > magnesium sulphate > magnesium chloride > magnesium acetate. There is an enhancement in CO2 adsorption capacity of metallized biochar (76.80 mg g-1) compare with pristine biochar (68.74 mg g-1). It can be justified by the synergetic influences of physicochemical characteristics. Gas selectivity study verified the high affinity of biochar for CO2 capture compared with other gases such as air, methane, and nitrogen. This investigation also revealed a stable performance of the metallized biochar in 25 cycles of CO2 adsorption and desorption. Avrami kinetic model accurately predicted the dynamic CO2 adsorption performance for pristine and metallized biochar.
    Matched MeSH terms: Magnesium Compounds
  12. Bhagat SK, Pyrgaki K, Salih SQ, Tiyasha T, Beyaztas U, Shahid S, et al.
    Chemosphere, 2021 Aug;276:130162.
    PMID: 34088083 DOI: 10.1016/j.chemosphere.2021.130162
    Copper (Cu) ion in wastewater is considered as one of the crucial hazardous elements to be quantified. This research is established to predict copper ions adsorption (Ad) by Attapulgite clay from aqueous solutions using computer-aided models. Three artificial intelligent (AI) models are developed for this purpose including Grid optimization-based random forest (Grid-RF), artificial neural network (ANN) and support vector machine (SVM). Principal component analysis (PCA) is used to select model inputs from different variables including the initial concentration of Cu (IC), the dosage of Attapulgite clay (Dose), contact time (CT), pH, and addition of NaNO3 (SN). The ANN model is found to predict Ad with minimum root mean square error (RMSE = 0.9283) and maximum coefficient of determination (R2 = 0.9974) when all the variables (i.e., IC, Dose, CT, pH, SN) were considered as input. The prediction accuracy of Grid-RF model is found similar to ANN model when a few numbers of predictors are used. According to prediction accuracy, the models can be arranged as ANN-M5> Grid-RF-M5> Grid-RF-M4> ANN-M4> SVM-M4> SVM-M5. Overall, the applied statistical analysis of the results indicates that ANN and Grid-RF models can be employed as a computer-aided model for monitoring and simulating the adsorption from aqueous solutions by Attapulgite clay.
    Matched MeSH terms: Magnesium Compounds
  13. Moogi S, Jang SH, Rhee GH, Ko CH, Choi YJ, Lee SH, et al.
    Chemosphere, 2022 Jan;287(Pt 2):132224.
    PMID: 34826918 DOI: 10.1016/j.chemosphere.2021.132224
    Food waste, a renewable resource, was converted to H2-rich gas via a catalytic steam gasification process. The effects of basic oxides (MgO, CaO, and SrO) with 10 wt% Ni/Al2O3 on the gasification properties of food waste were investigated using a U-shaped gasifier. All catalysts prepared by the precipitation method were analyzed by X-ray diffraction, H2-temperature-programmed reduction, NH3-temperature-programmed desorption, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The Ni/Al2O3 catalyst was reduced incompletely, and low nickel concentrations were detected on the surface of the alumina. The basic oxides minimized the number of acid sites and suppressed the formation of nickel-aluminate (NiAlxOy) phase in catalyst. In addition, the basic oxides shifted nickel-aluminate reduction reaction to lower temperatures. It resulted in enhancing nickel concentration on the catalyst surface and increasing gas yield and hydrogen selectivity. The low gas yield of the Ni/Al2O3 catalyst was attributed to the low nickel concentration on the surface. The maximum gas yield (66.0 wt%) and hydrogen selectivity (63.8 vol%) of the 10 wt% SrO- 10 wt% Ni/Al2O3 catalyst correlated with the highly dispersed nickel on the surface and low acidity. Furthermore, coke deposition during steam gasification varied with the surface acidity of the catalysts and less coke was formed on 10 wt% SrO- 10 wt% Ni/Al2O3 due to efficient tar cracking. This study showed that the steam gasification efficiency of the Ni/Al2O3 catalyst could be improved significantly by the addition of SrO.
    Matched MeSH terms: Magnesium Oxide
  14. Azman EA, Ismail R, Ninomiya S, Jusop S, Tongkaemkaew U
    PLoS One, 2023;18(9):e0290703.
    PMID: 37713375 DOI: 10.1371/journal.pone.0290703
    Acid sulfate soil characterized by pyrite (FeS2) which produces high acidity (soil pH < 3.5) and release high amount of Al3+ and Fe2+. Application of 4 t ha-1 Ground Magnesium Limestone (GML), is a common rate used for acid sulfate soil by the rice farmers in Malaysia. Therefore, this study was conducted to evaluate the integral effect of ground magnesium limestone (GML) and calcium silicate and to determine the optimal combination on acid sulfate soils in Malaysia. The acid sulfate soils were incubated under the submerged condition for 120 days with GML (0, 2, 4, 6 t ha-1) in combination with calcium silicate (0, 1, 2, 3 t ha-1) arranged in a Completely Randomized Design (CRD). The soil was sampled after 30, 60, 90 and 120 days of incubation and analyzed for soil pH, exchangeable Al, Ca, Mg, K and available Si. A total of 2 out of 16 combinations met the desired soil requirement for rice cultivation. The desired chemical soil characteristics for rice cultivation are soil pH > 4, exchangeable Al < 2 cmolc Kg-1, exchangeable Ca > 2 cmolc kg-1, exchangeable Mg > 1 cmolc kg-1 and Si content > 43 mg kg-1. The combinations are i) 2 t ha-1 calcium silicate + 2 t ha-1 GML, and ii) 3 t ha-1 calcium silicate + 2 t ha-1 GML, respectively. These combination rates met the desired requirement of soil chemical characteristics for rice cultivation. Soil acidity was reduced by a gradual release of Ca2+ and SiO32- from calcium silicate continuously filling the exchange sites and reducing the potential of extra (free) H+ availability in the soil system. Combination of calcium silicate and GML, shows the ameliorative effect with; i) release of Ca, ii) binding of Al3+ making it inert Al-hydroxides and, iii) bind H+ to produce water molecules.
    Matched MeSH terms: Magnesium
  15. Dambatta MS, Murni NS, Izman S, Kurniawan D, Froemming GR, Hermawan H
    Proc Inst Mech Eng H, 2015 May;229(5):335-42.
    PMID: 25991712 DOI: 10.1177/0954411915584962
    This article reports the in vitro degradation and cytotoxicity assessment of Zn-3Mg alloy developed for biodegradable bone implants. The alloy was prepared using casting, and its microstructure was composed of Mg2Zn11 intermetallic phase distributed within a Zn-rich matrix. The degradation assessment was done using potentiodynamic polarization and electrochemical impedance spectrometry. The cell viability and the function of normal human osteoblast cells were assessed using 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium and alkaline phosphatase extracellular enzyme activity assays. The results showed that the degradation rate of the alloy was slower than those of pure Zn and pure Mg due to the formation of a high polarization resistance oxide film. The alloy was cytocompatible with the normal human osteoblast cells at low concentrations (<0.5 mg/mL), and its alkaline phosphatase activity was superior to pure Mg. This assessment suggests that Zn-3Mg alloy has the potential to be developed as a material for biodegradable bone implants, but the toxicity limit must be carefully observed.
    Matched MeSH terms: Magnesium/toxicity; Magnesium/chemistry*
  16. Mills K, Sosdian S, Muir DD, John EH, Santodomingo N, Johnson K, et al.
    Sci Rep, 2025 Mar 02;15(1):7365.
    PMID: 40025147 DOI: 10.1038/s41598-025-90614-y
    Marine calcifying organisms on coral reefs face significant threats from various anthropogenic stressors. To better understand how these organisms will respond to a rapidly changing ocean, it is crucial to investigate their biomineralization across different reef environments. Despite their resilience and potential as conservation hotspots, turbid reefs-projected to expand throughout the 21st century-remain understudied, including a limited knowledge of biomineralization processes within these environments. Herein, for the first time, we assess the crystallographic and geochemical signatures of aragonite giant clam shells Tridacna squamosa from high and low turbid reefs in the Coral Triangle. Shell composition is strongly influenced by turbidity and biominerals formed in a high turbid reef show a more organized crystal orientation and significantly lower element-to-calcium ratios (magnesium/calcium, strontium/calcium). We hypothesize that these variations are driven by physiological changes related to the trophic flexibility of T. squamosa, utilizing both autotrophic and heterotrophic mechanisms. Observed differences may have implications for biomechanical and defense responses of shells, important in their ability to survive future change.
    Matched MeSH terms: Magnesium/analysis; Magnesium/chemistry
  17. Kato M, Azimi MD, Fayaz SH, Shah MD, Hoque MZ, Hamajima N, et al.
    Chemosphere, 2016 Dec;165:27-32.
    PMID: 27619645 DOI: 10.1016/j.chemosphere.2016.08.124
    Toxic elements in drinking water have great effects on human health. However, there is very limited information about toxic elements in drinking water in Afghanistan. In this study, levels of 10 elements (chromium, nickel, copper, arsenic, cadmium, antimony, barium, mercury, lead and uranium) in 227 well drinking water samples in Kabul, Afghanistan were examined for the first time. Chromium (in 0.9% of the 227 samples), arsenic (7.0%) and uranium (19.4%) exceeded the values in WHO health-based guidelines for drinking-water quality. Maximum chromium, arsenic and uranium levels in the water samples were 1.3-, 10.4- and 17.2-fold higher than the values in the guidelines, respectively. We next focused on uranium, which is the most seriously polluted element among the 10 elements. Mean ± SD (138.0 ± 1.4) of the (238)U/(235)U isotopic ratio in the water samples was in the range of previously reported ratios for natural source uranium. We then examined the effect of our originally developed magnesium (Mg)-iron (Fe)-based hydrotalcite-like compounds (MF-HT) on adsorption for uranium. All of the uranium-polluted well water samples from Kabul (mean ± SD = 190.4 ± 113.9 μg/L; n = 11) could be remediated up to 1.2 ± 1.7 μg/L by 1% weight of our MF-HT within 60 s at very low cost (<0.001 cents/day/family) in theory. Thus, we demonstrated not only elevated levels of some toxic elements including natural source uranium but also an effective depurative for uranium in well drinking water from Kabul. Since our depurative is effective for remediation of arsenic as shown in our previous studies, its practical use in Kabul may be encouraged.
    Matched MeSH terms: Magnesium/pharmacology; Magnesium/chemistry*; Magnesium Hydroxide/pharmacology; Magnesium Hydroxide/chemistry*
  18. Hussein-Al-Ali SH, Al-Qubaisi M, Hussein MZ, Ismail M, Zainal Z, Hakim MN
    Int J Mol Sci, 2012;13(5):5899-916.
    PMID: 22754339 DOI: 10.3390/ijms13055899
    The intercalation of cetirizine into two types of layered double hydroxides, Zn/Al and Mg/Al, has been investigated by the ion exchange method to form CTZAN and CTMAN nanocomposites, respectively. The basal spacing of the nanocomposites were expanded to 31.9 Å for CTZAN and 31.2 Å for CTMAN, suggesting that cetirizine anion was intercalated into Layered double hydroxides (LDHs) and arranged in a tilted bilayer fashion. A Fourier transform infrared spectroscopy (FTIR) study supported the formation of both the nanocomposites, and the intercalated cetirizine is thermally more stable than its counterpart in free state. The loading of cetirizine in the nanocomposite was estimated to be about 57.2% for CTZAN and 60.7% CTMAN. The cetirizine release from the nanocomposites show sustained release manner and the release rate of cetirizine from CTZAN and CTMAN nanocomposites at pH 7.4 is remarkably lower than that at pH 4.8, presumably due to the different release mechanism. The inhibition of histamine release from RBL2H3 cells by the free cetirizine is higher than the intercalated cetirizine both in CTZAN and CTMAN nanocomposites. The viability in human Chang liver cells at 1000 μg/mL for CTZAN and CTMAN nanocomposites are 74.5 and 91.9%, respectively.
    Matched MeSH terms: Magnesium/pharmacology; Magnesium/chemistry*
  19. Toibah AR, Sopyan I, Mel M
    Med J Malaysia, 2008 Jul;63 Suppl A:83-4.
    PMID: 19024995
    The incorporation of magnesium ions into the calcium phosphate structure is of great interest for the development of artificial bone implants. This paper investigates the preparation of magnesium-doped biphasic calcium phosphate (Mg-BCP) via sol gel method at various concentrations of added Mg. The effect of calcinations temperature (ranging from 500 degrees C to 900 degrees C) and concentrations of Mg incorporated into BCP has been studied by the aid of XRD, TGA and infrared spectroscopy (IR) in transmittance mode analysis. The study indicated that the powder was pure BCP and Mg-BCP with 100% purity and high crystallinity. The results also indicated that beta-tricalcium phosphate (beta-TCP) phase can be observed when the powder was calcined at 800 degrees C and above.
    Matched MeSH terms: Magnesium Compounds/chemical synthesis; Magnesium Compounds/chemistry*
  20. Zhou H, Wu L, Wang HQ, Zheng JC, Zhang L, Kisslinger K, et al.
    Nat Commun, 2017 11 14;8(1):1474.
    PMID: 29133800 DOI: 10.1038/s41467-017-01655-5
    Multi-layer structure of functional materials often involves the integration of different crystalline phases. The film growth orientation thus frequently exhibits a transformation, owing to multiple possibilities caused by incompatible in-plane structural symmetry. Nevertheless, the detailed mechanism of the transformation has not yet been fully explored. Here we thoroughly probe the heteroepitaxially grown hexagonal zinc oxide (ZnO) films on cubic (001)-magnesium oxide (MgO) substrates using advanced scanning transition electron microscopy, X-ray diffraction and first principles calculations, revealing two distinct interface models of (001) ZnO/(001) MgO and (100) ZnO/(001) MgO. We have found that the structure alternatives are controlled thermodynamically by the nucleation, while kinetically by the enhanced Zn adsorption and O diffusion upon the phase transformation. This work not only provides a guideline for the interface fabrication with distinct crystalline phases but also shows how polar and non-polar hexagonal ZnO films might be manipulated on the same cubic substrate.
    Matched MeSH terms: Magnesium Oxide
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links