A total of 341 fertilized and 37 unfertilized oocytes from 63 intracytoplasmic sperm injection (ICSI) treatment cycles were included for retrospective assessment using the Embryoscope time-lapse video system. The second polar body (pb2) extrusion occurred at 2.9±0.1 h (range 0.70-10.15 h) relative to sperm injection. All oocytes reduced in size following sperm injection (p<0.05) with shrinkage ceasing after 2h in the unfertilized and at pb2 extrusion in the fertilized oocytes. Pb2 extrusion was significantly delayed for women aged >38 years compared to those <35 years (3.4±0.2 vs. 2.8±0.1, p<0.01) or 35-38 years (3.4±0.2 vs. 2.8±0.1, p<0.01), but timing was not related to the Day 3 morphological grades (1-4) of subsequent embryos (2.9±0.1, 2.9±0.1, 2.8±0.2 and 3.0±0.1; p>0.05 respectively). A shorter time of first cleavage division relative to either sperm injection or pb2 extrusion is associated with both top grade (AUC=0.596 or 0.601, p=0.006 or 0.004) and usable embryos (AUC=0.638 or 0.632, p=0.000 respectively) on Day 3. In summary, (i) pb2 of human oocytes extrudes at various times following sperm injection, (ii) the timing of pb2 extrusion is significantly delayed when female age >38 years, but not related to subsequent embryo development, (iii) all human oocytes reduce in size following sperm injection, (iv) completion of pb2 extrusion in the fertilized oocytes is a pivotal event in terminating shrinkage of the vitellus, and (v) time to first cleavage division either from sperm injection or pb2 extrusion is a significant predictive marker for embryo quality on Day 3.
Limb loading measurements serve as an objective evaluation of asymmetrical weight bearing in the lower limb. Digital weighing scales (DWSs) could be used in clinical settings for measurement of static limb loading. However, ambiguity exists whether limb loading measurements of DWSs are comparable with a standard tool such as MatScan. A cross-sectional study composed of 33 nondisabled participants was conducted to investigate the reliability, agreement, and validity of DWSs with MatScan in static standing. Amounts of weight distribution and plantar pressure on the individual lower limb were measured using two DWSs (A, B) and MatScan during eyes open (EO) and eyes closed (EC) conditions. The results showed that intra- and interrater reliability (3, 1) were excellent (0.94-0.97) within and between DWS A and B. Bland-Altman plot revealed good agreement between DWS and MatScan in EO and EC conditions. The area under the receiver operating characteristic curve was significant and identified as 0.68 (p = 0.01). The measurements obtained with DWSs are valid and in agreement with MatScan measurements. Hence, DWSs could be used interchangeably with MatScan and could provide clinicians an objective measurement of limb loading suitable for clinical settings.
Matched MeSH terms: Weights and Measures/instrumentation*
Soft biometrics can be used as a prescreening filter, either by using single trait or by combining several traits to aid the performance of recognition systems in an unobtrusive way. In many practical visual surveillance scenarios, facial information becomes difficult to be effectively constructed due to several varying challenges. However, from distance the visual appearance of an object can be efficiently inferred, thereby providing the possibility of estimating body related information. This paper presents an approach for estimating body related soft biometrics; specifically we propose a new approach based on body measurement and artificial neural network for predicting body weight of subjects and incorporate the existing technique on single view metrology for height estimation in videos with low frame rate. Our evaluation on 1120 frame sets of 80 subjects from a newly compiled dataset shows that the mentioned soft biometric information of human subjects can be adequately predicted from set of frames.
Matched MeSH terms: Body Weights and Measures/methods*
BACKGROUND: This study was to investigate the prevalence of single nucleotide polymorphisms (SNPs) in leptin gene LEP (A19G and G2548A) and leptin receptor gene LEPR (K109R and Q223R) and their association with fasting plasma leptin level (PLL) and obesity in a Malaysian suburban population in Kampar, Perak.
METHODS: Convenience sampling was performed with informed consents, and the study sample was drawn from patients who were patrons of the Kampar Health Clinic. A total of 408 subjects (mean age, 52.4 +/- 13.7 years; 169 men, 239 women; 190 obese, 218 non-obese; 148 Malays, 177 ethnic Chinese, 83 ethnic Indians) participated. Socio-demographic data and anthropometric measurements were taken, and genotyping was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP).
RESULTS: The LEP A19G, G2548A and LEPR K109R, Q223R variant allele frequencies were 0.74, 0.67 and 0.61, 0.79, respectively. The genotype and allele distributions of these gene variants were significantly different among ethnic groups, but not among body mass index (BMI) classes. Subjects with LEPR K109 and Q223 allele had significantly higher systolic blood pressure and adiposity indices after adjustment for ethnicity (higher BMI, total body and subcutaneous fat; lower skeletal muscle percentage). Subjects with LEPR 109R allele had lower PLL than their wild-type allele counterparts. The influence of LEP A19G and G2548A SNPs on blood pressures, anthropometrics, and PLL was not evident. Interestingly, synergistic effect of the LEP and LEPR SNPs was observed as subjects homozygous for all four SNPs studied exhibited significantly higher subcutaneous fat and PLL than those with other genotype combinations.
CONCLUSIONS: The LEP and LEPR SNPs in this study may not be an obesity marker among Malaysians in this population, but were associated with ethnicity. Our findings suggest that each of these SNPs contributes to minor but significant variation in obesity-related traits and in combination they display synergistic effects on subcutaneous fat and PLL.
The family Poritidae formerly included 6 genera: Alveopora, Goniopora, Machadoporites, Porites, Poritipora, and Stylaraea. Morphologically, the genera can be differentiated based on the number of tentacles, the number of septa and their arrangement, the length of the polyp column, and the diameter of the corallites. However, the phylogenetic relationships within and between the genera are unknown or contentious. On the one hand, Alveopora has been transferred to the Acroporidae recently because it was shown to be more closely related to this family than to the Poritidae by previous molecular studies. On the other hand, Goniopora is morphologically similar to 2 recently described genera, Machadoporites and Poritipora, particularly with regard to the number of septa (approximately 24), but they have not yet been investigated at the molecular level. In this study, we analyzed 93 samples from all 5 poritid genera and Alveopora using 2 genetic markers (the barcoding region of the mitochondrial COI and the ITS region of the nuclear rDNA) to investigate their phylogenetic relationships and to revise their taxonomy. The reconstructed molecular trees confirmed that Alveopora is genetically distant from all poritid genera but closely related to the family Acroporidae, whereas the other genera are genetically closely related. The molecular trees also revealed that Machadoporites and Poritipora were indistinguishable from Goniopora. However, Goniopora stutchburyi was genetically isolated from the other congeneric species and formed a sister group to Goniopora together with Porites and Stylaraea, thus suggesting that 24 septa could be an ancestral feature in the Poritidae. Based on these data, we move G. stutchburyi into a new genus, Bernardpora gen. nov., whereas Machadoporites and Poritipora are merged with Goniopora.
OBJECTIVE: The unavailability of anthropometric data especially in developing countries has remained a limiting factor towards the design of learning facilities with sufficient ergonomic consideration. Attempts to use anthropometric data from developed countries have led to provision of school facilities unfit for the users. The purpose of this paper is to use factor analysis to investigate the suitability of the collected anthropometric data as a database for school design in Nigerian tertiary institutions.
PARTICIPANTS: Anthropometric data were collected from 288 male students in a Federal Polytechnic in North-West of Nigeria. Their age is between 18-25 years.
METHODS: Nine vertical anthropometric dimensions related to heights were collected using the conventional traditional equipment. Exploratory factor analysis was used to categorize the variables into a model consisting of two factors. Thereafter, confirmatory factor analysis was used to investigate the fit of the data to the proposed model.
RESULTS: A just identified model, made of two factors, each with three variables was developed. The variables within the model accounted for 81% of the total variation of the entire data. The model was found to demonstrate adequate validity and reliability. Various measuring indices were used to verify that the model fits the data properly. The final model reveals that stature height and eye height sitting were the most stable variables for designs that have to do with standing and sitting construct.
CONCLUSION: The study has shown the application of factor analysis in anthropometric data analysis. The study highlighted the relevance of these statistical tools to investigate variability among anthropometric data involving diverse population, which has not been widely used for analyzing previous anthropometric data. The collected data is therefore suitable for use while designing for Nigerian students.
KEYWORDS: Exploratory factor analysis; measurement model; school ergonomics
The aim of this study was to investigate the effects of a two week reduction in training load on selected physiological and performance among junior cyclist. Twenty seven male junior cyclists (age= 16.6±0.7 years, height=165.6±6.1 cm, weight= 54.1±8.1 kg) were matched into either the control group (n=13) or the experimental group (n=14) using their initial VO2max values. Both groups followed a 12-week progressive endurance training program and subsequently, the experimental group (EXP) engaged in a two week tapering (recovery via a reduction in training loads) phase. The control group continued with their normal training routine. A simulated 20 km time trials performance and a graded exercise test on cycle ergometer were performed before and after endurance training and after the two week tapering protocol. Following the conclusion of the two week intervention or no intervention program both groups undertook a TT20km. Results showed no significant difference in the TT20km performance. Compared to the CON group, the EXP group showed significant changes in all the selected physiological variables tested, p
The combustion characteristics of refuse derived fuel (RDF) in a fluidized bed have been studied. The gross heating value (GHv) of the RDF was 14.43 MJIkg with moisture content of 25% by weight. Parameters of interest for sustainable bed combustion were the fluidization number and primary air factor. The study was performed in a rectangular fluidized bed combustor with dimensions of 0.3 m in width, 0.7 m in length and 2 m in height. Sand with mean particle size of 0.34 mm was used as a fluidization medium. The sand bed height was at 0.3 m above the standpipes air distributor. The range of fluidization number under investigation was 5-7 II fin which 5 II newas found to be the optimum. The study was continued for the determination of the optimum primary air factor with the selected range of primary air factors being 0.6, 0.8, 1.0 and 12 in experiments conducted at 5 Unit The final results showed that the optimum primary air factor was at 0.8. An energy balance was also performed to determine the thermal efficiency of the combustion. It was concluded that the thermal efficiency depended on the bed temperature and the primary air factor being used.
Handgrip strength is useful for screening the nutritional status of adult population as it is strongly associated with physical disabilities and mortality. Therefore, we aimed to determine the predictors of handgrip strength among adults of a rural community in Malaysia using a cross-sectional study design with multistage sampling. All adults aged 30 years and older from 1250 households were invited to our study. Structured questionnaire on sociodemographic characteristics, medical history, occupation history, lifestyle practices, and measurements, including anthropometry and handgrip strength were taken. There were 2199 respondents with 55.2% females and majority were of Malay ethnicity. Their mean (standard deviation) age was 53.4 (13.2) years. The response rate for handgrip strength was 94.2%. Females had significantly lower handgrip strength than males (P < .05). In the multiple linear regression models, significant predictors of handgrip strength for males were age, height, job groups, and diabetes, while for females, the significant predictors were age, weight, height, and diabetes.
General obesity, as reflected by BMI, is an established risk factor for esophageal adenocarcinoma (EAC), a suspected risk factor for gastric cardia adenocarcinoma (GCC) and appears unrelated to gastric non-cardia adenocarcinoma (GNCC). How abdominal obesity, as commonly measured by waist circumference (WC), relates to these cancers remains largely unexplored. Using measured anthropometric data from 391,456 individuals from the European Prospective Investigation into Cancer and Nutrition (EPIC) study and 11 years of follow-up, we comprehensively assessed the association of anthropometric measures with risk of EAC, GCC and GNCC using multivariable proportional hazards regression. One hundred twenty-four incident EAC, 193 GCC and 224 GNCC were accrued. After mutual adjustment, BMI was unrelated to EAC, while WC showed a strong positive association (highest vs. lowest quintile HR = 1.19; 95% CI, 0.63-2.22 and HR = 3.76; 1.72-8.22, respectively). Hip circumference (HC) was inversely related to EAC after controlling for WC, while WC remained positively associated (HR = 0.35; 0.18-0.68, and HR=4.10; 1.94-8.63, respectively). BMI was not associated with GCC or GNCC. WC was related to higher risks of GCC after adjustment for BMI and more strongly after adjustment for HC (highest vs. lowest quintile HR = 1.91; 1.09-3.37, and HR = 2.23; 1.28-3.90, respectively). Our study demonstrates that abdominal, rather than general, obesity is an indisputable risk factor for EAC and also provides evidence for a protective effect of gluteofemoral (subcutaneous) adipose tissue in EAC. Our study further shows that general obesity is not a risk factor for GCC and GNCC, while the role of abdominal obesity in GCC needs further investigation.
Cancer classification and gene selection in high-dimensional data have been popular research topics in genetics and molecular biology. Recently, adaptive regularized logistic regression using the elastic net regularization, which is called the adaptive elastic net, has been successfully applied in high-dimensional cancer classification to tackle both estimating the gene coefficients and performing gene selection simultaneously. The adaptive elastic net originally used elastic net estimates as the initial weight, however, using this weight may not be preferable for certain reasons: First, the elastic net estimator is biased in selecting genes. Second, it does not perform well when the pairwise correlations between variables are not high. Adjusted adaptive regularized logistic regression (AAElastic) is proposed to address these issues and encourage grouping effects simultaneously. The real data results indicate that AAElastic is significantly consistent in selecting genes compared to the other three competitor regularization methods. Additionally, the classification performance of AAElastic is comparable to the adaptive elastic net and better than other regularization methods. Thus, we can conclude that AAElastic is a reliable adaptive regularized logistic regression method in the field of high-dimensional cancer classification.
Previous reports of patients undergoing parathyroidectomy and of patients receiving teriparatide as antiosteoporotic treatment have suggested a plausible relationship between parathyroid hormone (PTH) and uric acid. However, similar data at population level were lacking. The current study aimed to determine the relationship between PTH and uric acid in a group of apparently healthy Malaysian men.
This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45 μm and 150 μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The results revealed significant change in morphology of the eroded samples. In-depth analysis showed that although the metal erosion due to larger particles was significantly higher, the fines also notably damaged the metal surface. The surface damages were appreciably reduced with decrease in impact angle of the accelerated particles. The maximum damages were observed at an impact angle of 90°. The hardness of the samples treated with 45 μm and 150 μm sand remained in the range of 88.34 to 102.31 VHN and 87.7 to 97.55 VHN, respectively. In electrochemical experiments, a triple electrode probe was added into the metal treatment process. The linear polarization resistance (LPR) measurements were performed in slurries having 5% (by weight) of sand particles. LPR of the samples treated with 45 μm and 150 μm sand slurries was calculated about 949 Ω.cm(2) and 809 Ω.cm(2), respectively.
In a meristic, morphometric and distributional study of Neolissochilus from Peninsular Malaysia, Khaironizam et al. (2015) subsumed Lissochilus tweediei Herre in Herre & Myers 1937 and a taxon they called "Tor soro Bishop 1973" into the synonymy of N. soroides (Duncker 1904) based on data collected from museum specimens. However, "Bishop 1973" is not the correct author citation for Tor soro. Instead, Tor (now placed in Neolissochilus) soro was originally described as Barbus soro by Valenciennes in Cuvier & Valenciennes (1842:191). Since "Tor soro Bishop 1973" is not a valid name/author combination, Neolissochilus soro, as treated by Khaironizam et al. (2015), cannot be considered a junior synonym of N. soroides.
Exposure to PCDD/PCDF (dioxin and furan) through consumption of fish and shellfish is closely related to the occurrence of skin diseases, such as chloracne and hyperpigmentation. This study aimed to determine the exposure of PCDD/PCDF and its congeners in fish and shellfish obtained from different regions of the Straits of Malacca among the fishing community.
Double-burden of malnutrition (DBM) is an emerging public health concern among the Orang Asli (indigenous peoples) of Peninsular Malaysia. This study aimed to identify the presence of DBM at the community and household levels in Orang Asli population and its associated demographic and socio-economic factors.
The purpose of this study was to determine the effects of 100% feedback frequencies, 65% of feedback frequencies and bandwidth feedback on overhand throwing skill among children and motivation of the children during practices. 60 of female students from range of aged 10 to 11 years old are participated in this study (age: M=10.53 years/SD=.503, weight: M=29.11/SD3.08, height=126.68/3.04). All participants practiced 60 trials of overhand throwing accuracy task and the motivation of the participant had been measured by using Intrinsic Motivation Inventory Questionnaire (IMI) (r=0.59). Participants were randomly assigned into three group 100% feedback, 65% feedback and bandwidth feedback groups. Learning was inferred from the performance on the delayed (24-hour) retention. To analyze the data, we use mixed-between ANOVA for practice phases, One Way ANOVA for retention test and correlation analysis to measure the relationship between feedback frequencies and motivation. There was no significant result between group (F (2, 57) =.286, p= .752) during practices, there is a significant difference on retention test phase (p
Sludge is an unavoidable product of wastewater treatment that creates problems of disposal. Increasingly, strict environmental control regulations have resulted in limitations on sludge disposal options.Disposal by incineration has been found to be a good option. In this research, application of domestic waste sludge powder (DWSP) was used as cement replacement in concrete mix. This study utilised replacement of 3 %, 5 %, 7 %, 10 % and 15 % by weight of OPC with water binder (w/b) ratio of 0.60, 0.55 and 0.40 for Grade 30, Grade 40 and Grade 50 respectively. The performance of DWSP concrete in terms of its compressive strength, water absorption, water permeability and Rapid Chloride Ion penetration were investigated. All values of compressive strength for DWSP concrete were lower compared to the OPC control, and the strength decreased as the percentage of replacement with DWSP increased for Grade 30 and Grade 50, except for Grade 40 at replacement of 7 %. Meanwhile, water absorption and water permeability for the DWSP concrete increased as the replacement increased. Overall, with further research in producing quality DWSP, the potential of using this waste as a cement replacement material is very promising.
Phenotypic selection of individuals is the first step in a selective breeding program for elite hybrid seed production. In
this study, a total of 295 Jatropha curcas individuals raised from cuttings representing 21 accessions, collected from eight
different countries were evaluated for growth performance. The evaluation was done at the Biodiesel Research Station
of Universiti Kebangsaan Malaysia, Kuala Pilah from December 2012 to December 2013. Individual plants from each
accession were observed on several agronomic and yield related traits and all the data were recorded periodically.
Performance of each accession was analyzed using Statistical Analysis System (SAS) 9.4. Four traits which were plant
height (PH), number of flowers per inflorescence (NFI), number of female flowers per inflorescence (NFFPI) and hundred
seed weight (HSW) showed significant differences among the accessions after one year of planting. Maximum values for
each trait were 115.5 cm for PH, 6 for number of branches per plant (BPP), 9 for number of inflorescences per plant
(NIPP), 25 for number of fruits per plant (NFPP), 5 for number of fruits per inflorescence (NFPI), 191 for NFI, 10 for
NFFPI, 81.0 g for HSW and 70 for number of seeds per plant (NSPP). Accession number 1 from Thailand showed the best
performance for most traits. A highly significant and positive correlation was found between NFPP and NSPP. Based on
superior trait values for NIPP, NFPP, NFPI, NFI, NFFPI and HSW, five plants from accession UKMJC 01, 04, 05, 13 and 14
have been selected for generating elite intraspecific hybrids.
The issue of age difference in hospital admission should be given special attention since it affects the structure of hospital care and treatments. Patients of different age groups should be given different priority in service provision. Due to crucial time and limited resources, healthcare managers need to make wise decisions in identifying priorities in age of admission. This paper aimed to propose a construction of a daily composite hospital admission index (CHAI) as an indicator that captures relevant information about the overall performance of hospital admission over time. It involves five different age groups of total patients admitted to seven major public hospitals in the Klang Valley, Malaysia for respiratory and cardiovascular diseases for a period of three years, 2008 - 2010. The criteria weights were predetermined by aggregating the subjective weight based on rank ordered centroid (ROC) method and objective weight based on entropy - kernel method. The highest and lowest scores of CHAI were marked, while the groups of patients were prioritized according to the criteria weight ranking orders.