Displaying publications 41 - 60 of 79 in total

Abstract:
Sort:
  1. Mohd Nor NA, Chadwick BL, Farnell DJ, Chestnutt IG
    Rev Environ Health, 2020 Nov 18;35(4):419-426.
    PMID: 32598322 DOI: 10.1515/reveh-2019-0059
    OBJECTIVE: The increased availability of fluoride and concern over the impact of fluorosis, have led to guidance suggesting a decrease or cease in the optimal concentration of fluoride in water fluoridation schemes. To date there have been no systematic reviews looking at both impact of fluoride reduction and total cessation. This review aimed to examine the impact of stopping or reducing the level of fluoride in public water supplies on dental fluorosis.

    CONTENT: Multiple databases were searched (MEDLINE, EMBASE, the Cochrane Central Register of Controlled Trials and the Web of Science). Two reviewers independently screened sources, extracted data and assessed study quality. Results were synthesised qualitatively and quantitatively. The main outcome measure was the prevalence of dental fluorosis.

    SUMMARY: Six studies of cross-sectional design were included. Two studies were scored as evidence level B (moderate) and the remaining four publications were evidence level C (poor). Meta-analysis indicated fluorosis prevalence was significantly decreased following either a reduction in the concentration of fluoride or cessation of adding fluoride to the water supply (OR:6.68; 95% CI:2.48 to 18.00).

    OUTLOOK: The evidence suggests a significant decrease in the prevalence of fluorosis post cessation or reduction in the concentration of fluoride added to the water supply. However, this work demonstrates that when studies are subject to current expectations of methodological and experimental rigour, there is limited evidence with low methodological quality to determine the effect of stopping or reducing the concentration of fluoride in the water supply on dental fluorosis.

    Matched MeSH terms: Fluorides/administration & dosage*
  2. Rais NNM, Bradley DA, Hashim A, Isa NM, Osman ND, Ismail I, et al.
    J Radiol Prot, 2019 Sep;39(3):N8-N18.
    PMID: 31018196 DOI: 10.1088/1361-6498/ab1c16
    Novel germanium (Ge)-doped silica glass fibres tailor-made in Malaysia are fast gaining recognition as potential media for thermoluminescence (TL) dosimetry, with active research ongoing into exploitation of their various beneficial characteristics. Investigation is made herein of the capability of these media for use in diagnostic imaging dosimetry, specifically at the radiation dose levels typically obtained in conduct of Computed Tomography (CT). As a first step within such efforts, there is need to investigate the performance of the fibres using tightly defined spectra, use being made of a Philips constant potential industrial x-ray facility, Model MG165, located at the Malaysian Nuclear Agency Secondary Standards Dosimetry Lab (SSDL). Standard radiation beam qualities (termed RQT) have been established for CT, in accord with IEC 61267: 2003 and IAEA Technical Reports Series No. 457: 2007. A calibrated ionisation chamber has also been utilised, forming a component part of the SSDL equipment. The fabricated fibres used in this study are 2.3 mol% flat fibre (FF) of dimensions 643 × 356 μm2 and 2.3 mol% cylindrical fibre (CF) of 481 μm diameter, while the commercial fibre used is 4 mol% with core diameter of 50 μm. The dopant concentrations are nominal preform values. The fibres have been irradiated to doses of 20, 30 and 40 milligray (mGy) for each of the beam qualities RQT 8, RQT 9 and RQT 10. For x-rays generated at constant potential values from 100 to 150 kV, a discernible energy-dependent response is seen, comparisons being made with that of lithium fluoride (LiF) thermoluminescence dosimeters (TLD-100). TL yield versus dose has also been investigated for x-ray doses from 2 to 40 mGy, all exhibiting linearity. Compared to TLD-100, greater sensitivity is observed for the fibres.
    Matched MeSH terms: Fluorides/chemistry
  3. Sadrolhosseini AR, Krishnan G, Shafie S, Abdul Rashid S, Wadi Harun S
    Molecules, 2020 Dec 09;25(24).
    PMID: 33316885 DOI: 10.3390/molecules25245798
    This study used the carbon dots solution for the laser ablation technique to fabricate silver nanoparticles. The ablation time range was from 5 min to 20 min. Analytical methods, including Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy, transmission electron microscopy, and Raman spectroscopy were used to categorize the prepared samples. The UV-visible and z-scan techniques provided optical parameters such as linear and nonlinear refractive indices in the range of 1.56759 to 1.81288 and 7.3769 × 10-10 cm2 W-1 to 9.5269 × 10-10 cm2 W-1 and the nonlinear susceptibility was measured in the range of 5.46 × 10-8 to 6.97 × 10-8 esu. The thermal effusivity of prepared samples, which were measured using the photoacoustic technique, were in the range of 0.0941 W s1/2 cm-2 K-1 to 0.8491 W s1/2 cm-2 K-1. The interaction of the prepared sample with fluoride was investigated using a Raman spectrometer. Consequently, the intensity of the Raman signal decreased with the increasing concentration of fluoride, and the detection limit is about 0.1 ppm.
    Matched MeSH terms: Fluorides/chemistry
  4. Mohd Nor NA, Chadwick BL, Farnell DJJ, Chestnutt IG
    Community Dent Oral Epidemiol, 2018 10;46(5):492-499.
    PMID: 30019792 DOI: 10.1111/cdoe.12407
    OBJECTIVE: To assess the prevalence and severity of dental fluorosis and caries among Malaysian children following the reduction in fluoride concentration from 0.7 to 0.5 parts per million (ppm) in the public water supply.

    METHODS: This study involved lifelong residents aged 9- and 12-year-olds in fluoridated and nonfluoridated areas in Malaysia (n = 1155). In the fluoridated area, children aged 12 years and 9 years were exposed to 0.7 and 0.5 ppm, respectively, at the times when maxillary central incisors developed. Standardized photographs of maxillary central incisors were blind scored for fluorosis using Dean's criteria. Dental caries was examined using ICDAS-II criteria.

    RESULTS: The prevalence of fluorosis (Dean's score ≥ 2) among children in the fluoridated area (35.7%, 95% CI: 31.9%-39.6%) was significantly higher (P 

    Matched MeSH terms: Fluorides/analysis
  5. Asghar M, Omar RA, Yahya R, Yap AU, Shaikh MS
    J Esthet Restor Dent, 2023 Mar;35(2):322-332.
    PMID: 36628650 DOI: 10.1111/jerd.13013
    OBJECTIVE: To the effectiveness of different strategies to overcome silver diamine fluoride (SDF)-mediated tooth staining.

    MATERIALS AND METHODS: Four online databases (PubMed, ScienceDirect, Scopus, and Web of Science) were searched using different MeSH terms and Boolean Operators to retrieve the articles (until June 2021), followed by a hand-search of the reference list of the included articles. All full-text, original studies in English that evaluated SDF staining and at least one SDF modification/alternative were included.

    RESULTS: Among the assessed studies, nine studies explored the stain-minimization effect of potassium iodide (KI) post-application following SDF treatment. Among these, eight concluded that KI application after SDF treatment significantly reduced tooth staining, while one showed marginal staining following glass ionomer restoration of the SDF-treated dentine. Additionally, one study applied potassium fluoride (KF) and silver nitrate (AgNO3 ) concurrently to mitigate SDF-mediated staining. One study compared SDF staining with polyethylene glycol (PEG)-coated nanoparticles containing sodium fluoride (NaF), and another used nanosilver fluoride (NSF) for staining comparison with SDF.

    CONCLUSIONS: Within the limitations of this study, the addition of different materials to SDF has proven to be a beneficial strategy for overcoming tooth staining associated with SDF. Future studies are warranted, particularly clinical trials, to validate these findings.

    CLINICAL SIGNIFICANCE: SDF-mediated tooth staining is a serious concern that limits its clinical use. A review of various strategies to overcome this problem will help clinicians enhance its clinical use and patient acceptance.

    Matched MeSH terms: Fluorides, Topical/therapeutic use
  6. Lai YK
    Br J Ophthalmol, 1990 Apr;74(4):201-2.
    PMID: 2337542
    Seven patients with macular hole retinal detachment were treated by intravitreal gas injection with or without release of subretinal fluid. Macular buckling, diathermy, cryopexy, or vitrectomy were not used. The patients were placed prone for eight hours a day until the gas had absorbed. In five of the seven patients the retina became reattached within three days and remained reattached with follow-up periods of three to 22 months (average nine months). It is believed that such detachments are due to vitreoretinal traction and the intravitreal gas bubble relieves this traction. This technique is simple, safe, and does not require costly or sophisticated instruments. It has an added advantage in preserving macular function.
    Matched MeSH terms: Fluorides/administration & dosage*
  7. Cui M, Jang M, Kang K, Kim D, Snyder SA, Khim J
    Chemosphere, 2016 Feb;144:2081-90.
    PMID: 26583290 DOI: 10.1016/j.chemosphere.2015.10.107
    A novel and economic sequential process consisting of precipitation, adsorption, and oxidation was developed to remediate actual rare-earth (RE) wastewater containing various toxic pollutants, including radioactive species. In the precipitation step, porous air stones (PAS) containing waste oyster shell (WOS), PASWOS, was prepared and used to precipitate most heavy metals with >97% removal efficiencies. The SEM-EDS analysis revealed that PAS plays a key role in preventing the surface coating of precipitants on the surface of WOS and in releasing the dissolved species of WOS successively. For the adsorption step, a polyurethane (PU) impregnated by coal mine drainage sludge (CMDS), PUCMDS, was synthesized and applied to deplete fluoride (F), arsenic (As), uranium (U), and thorium (Th) that remained after precipitation. The continuous-mode sequential process using PAS(WOS), PU(CMDS), and ozone (O3) had 99.9-100% removal efficiencies of heavy metals, 99.3-99.9% of F and As, 95.8-99.4% of U and Th, and 92.4% of COD(Cr) for 100 days. The sequential process can treat RE wastewater economically and effectively without stirred-tank reactors, pH controller, continuous injection of chemicals, and significant sludge generation, as well as the quality of the outlet met the EPA recommended limits.
    Matched MeSH terms: Fluorides
  8. Mohamad Hanafi Mohamad Rosli, Nurulhuda Amri, Norhusna Mohamad Nor
    ESTEEM Academic Journal, 2019;15(2):35-43.
    MyJurnal
    High concentration of fluoride in wastewater discharge from various industries is threatening the environment due to its hazardous effects and properties. This research work aims to develop an efficient adsorbent for fluoride removal in wastewater. Graphite oxide (GO) was impregnated
    with ZnO nanoparticles as an adsorbent, and the effect of synthesis parameters of GO-ZnO adsorbent for fluoride removal were studied (sonication temperature, synthesis time, and ratio of GO to ZnO). The surface functional groups of these synthesized adsorbents were analyzed by
    using FTIR. The synthesis parameters that contribute to the highest adsorption capacity and percentage removal are 5:1 ratio of GO-ZnO, 45 ºC of sonication temperature and 60 minutes of synthesis time, respectively. The highest value of adsorption capacity obtained from the fluoride
    removal is 55.5 mg/g. The functional groups contained in the GO-ZnO adsorbent are hydroxyl group (O-H), C=O group, aromatics group, carboxyl group (C-O), epoxy group and alkoxy group. These functional groups showed significant impact towards fluoride adsorption due to the bonding of fluoride ion to the functional groups.
    Matched MeSH terms: Fluorides
  9. B Aziz S, H Hamsan M, M Nofal M, San S, Abdulwahid RT, Raza Saeed S, et al.
    Polymers (Basel), 2020 Jul 09;12(7).
    PMID: 32660095 DOI: 10.3390/polym12071526
    In this study, solid polymer blend electrolytes (SPBEs) based on chitosan (CS) and methylcellulose (MC) incorporated with different concentrations of ammonium fluoride (NH4F) salt were synthesized using a solution cast technique. Both Fourier transformation infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results confirmed a strong interaction and dispersion of the amorphous region within the CS:MC system in the presence of NH4F. To gain better insights into the electrical properties of the samples, the results of electrochemical impedance spectroscopy (EIS) were analyzed by electrical equivalent circuit (EEC) modeling. The highest conductivity of 2.96 × 10-3 S cm-1 was recorded for the sample incorporated with 40 wt.% of NH4F. Through transference number measurement (TNM) analysis, the fraction of ions was specified. The electrochemical stability of the electrolyte sample was found to be up to 2.3 V via the linear sweep voltammetry (LSV) study. The value of specific capacitance was determined to be around 58.3 F/g. The stability test showed that the electrical double layer capacitor (EDLC) system can be recharged and discharged for up to 100 cycles with an average specific capacitance of 64.1 F/g. The synthesized EDLC cell was found to exhibit high efficiency (90%). In the 1st cycle, the values of internal resistance, energy density and power density of the EDLC cell were determined to be 65 Ω, 9.3 Wh/kg and 1282 W/kg, respectively.
    Matched MeSH terms: Fluorides
  10. Mohd Desa, S. N. F., Muhamad, N. A., Mohd Nor, N. A., Abdul Razak, F., Abdul Manan, N. S., Abdul Manan, N. S., et al.
    MyJurnal
    The window of maximum susceptibility for the development of dental fluorosis for anterior
    teeth is during the first two to three years of life. The primary source of fluoride intake for
    infants at this age is mainly from the diet including infant formula. Thus, the present work
    aimed to investigate the fluoride concentration in commercially available Malaysian infant
    formulas that required reconstitution before consumption. A total of 29 infant formulas available in the Malaysian market were reconstituted with deionised water, fluoridated tap water,
    and filtered tap water. The fluoride concentration of the infant formulas was analysed directly
    using a fluoride ion selective electrode. The daily fluoride intake estimation from the infant
    formulas was calculated using the median infant body weight and recommended volumes for
    formula consumption from newborn to > 12 months of age. Results showed that the fluoride
    concentration of the infant formulas when reconstituted with deionised water ranged between
    0.009 to 0.197 mg/L that contributed to the estimated daily fluoride intake ranging from 0.005
    to 0.100 mg (total intake per day) or 0.001 to 0.025 mg/kg (total intake per body weight/day).
    The fluoride concentration in the selected infant formulas was low, but after reconstitution
    with fluoridated tap water, the overall fluoride concentration in infant formulas sample significantly increased (p < 0.001). Nevertheless, the estimated daily fluoride intake from infant
    formulas alone did not exceed the lowest-observed-adverse-effect level (LOAEL) of fluoride
    at 0.10 mg/kg/day.
    Matched MeSH terms: Fluorides
  11. S. Nagarajan M.P. Sockalingam, Suhairah Jani, Noridawati Mohd Nor
    Malaysian Dental Journal, 2010;31(1):14-19.
    MyJurnal
    Objectives: To assess pattern of toothpaste usage among young children under 6 years old.

    Materials and methods: This was a cross-sectional descriptive study carried out at the Faculty of Dentistry, Universiti Kebangsaan Malaysia. Parents of children below 6 years old were involved. 200 questionnaires were distributed and 136 (68%) were returned for analysis. The questionnaire covered the following parameters: type, frequency, and quantity of toothpaste usage among children, level of parental knowledge of fluoride concentration in toothpaste and selection criteria of suitable toothpaste for their children.

    Results: Majority of the respondents (83.1%) said they used children’s toothpaste to brush their child’s teeth and 62.5 % of them knew that the toothpaste used had fluoride in it. Slightly more than half of the respondents (53.7%) said they started brushing their child’s teeth one year after eruption of the first tooth. Almost an equal proportion of the respondents reported using toothpaste twice daily (50.7%) and only 44.1% of them supervised their children’s brushing. Respondents generally used more than a pea-sized toothpaste quantity (53.6%). Taste, fluoride concentration and brand of the toothpaste appeared to be the main criteria that influenced the selection of the toothpaste (55.9%). Income and educational levels of the respondents did not influence the type of toothpaste used.

    Conclusion: These findings indicated that although parents were brushing their childrens’ teeth with children toothpaste, they were still unaware of the proper usage and importance of fluoridated toothpaste.
    Matched MeSH terms: Fluorides
  12. Abdul Kadir, R., Latifah Abdol Latif
    Ann Dent, 1998;5(1):-.
    MyJurnal
    To date, fluorides has remained to be the best means of controlling dental caries. Fluoride is given either systematically via fluoridated water or topically through other supplements including toothpastes. In recent years increasing prevalence of enamel defects or fluorosis is observed in both populations receiving or not receiving water fluoridation. It is suspected that excessive ingestion of a "standard" 1000 to 1500 ppm fluoride from toothpastes might be a contributing factor to the presence of such defects. In Malaysia, reports of enamel defects occurring amongst 12 to 16 year-old schoolchildren ranged between 67 to 88 percent. Where water fluoridation is available, the amount of fluorides received from the home is between 0.3 to 0.5 ppm F. However, almost all toothpastes sold locally contains fluoride, the content of which is unknown to the consumers. This study reports on the analysis of fluoride levels carried out on 20 toothpaste samples sold locally. Results showed that fluoride levels in all 20 samples ranged between 20 to 1970 ppm F. Only two of the 20 samples analyzed, however, indicated having a level anywhere near the "standard" level. In addition, only two type~ of children's toothpaste with a fluoride concentration of 20 and 450 ppm F were commonly available as compared to adult toothpastes in all the samples studied.
    Matched MeSH terms: Fluorides
  13. Saub, R.
    Ann Dent, 1998;5(1):-.
    MyJurnal
    This study was undertaken to investigate the number and types (fluoride or non-fluoride) of toothpaste products available in the Malaysian market based on the label. Thirty-five brands of toothpaste were identified, of which ten (29%) were specifically recommended for children. Two of the children's toothpaste recommended that children below seven years old use a pea size amount of toothpaste. One (3%) was recommended for both children and adult. The remaining 24 (69%) did not state if they were recommended for either children or adults. To improve the flavour of the toothpastes, a variety of flavours had been added especially in children's toothpaste. Almost half of the toothpastes were for prevention of tooth decay and gum disease. Other indications were for tooth sensitivity, tooth whitening and stain removal. Twentyseven (77%) of the toothpastes were imported, while eight (23%) were made in Malaysia. Twenty-six (74%) of the toothpaste contained fluoride and the most common type of fluoride used was sodium monofluorophosphate (NaMFP). The fluoride concentration was not labeled in more than half (63%) of the fluoridated toothpaste. Of those that were fluoridated, different units of measurement were used. As there is no uniformity in the labelling of these products, it is recommended that the responsible authorities should take more action in enforcing proper labelling of the fluoride concentration in the toothpaste using standardized units.
    Matched MeSH terms: Fluorides
  14. Syahriza Ismail, Nurul Izza Soaid, Suriyati Mohamed Ansari, Nurulhuda Bashirom, Monna Rozana, Tan, Wai Kian, et al.
    MyJurnal
    In the formation of ZrO2 (zirconia) nanotubes (ZNTs) by anodisation of zirconium, a balance between chemical etching at the surface of the nanotubes and inward growth inside the nanotubes is required. This can be achieved by using fluorinated organic electrolyte like ethylene glycol with the addition of small volume of oxidant. In this work, carbonate was selected as the oxidant and NH4F as the source of fluoride for chemical etching process. Two sets of electrolytes were studied EG/fluoride/Na2CO3 and EG/fluoride/K2CO3. It appears that in the presence of carbonate evolution of gas at the anode during the anodisation process was rather severe. The gas which is likely to be CO2 was found to weaken the adherence between the oxide film with the underlying Zr foil. This induced the formation of free standing ZNTs. High Resolution Transmission Electron Microscope (HRTEM) was used to investigate the crystallinity of the nanotubes where the majority crystal phase of ZNTs was tetragonal/cubic. The ZNTs were used as photocatalysts to oxidize methyl orange dye.
    Matched MeSH terms: Fluorides
  15. Bharudin I, Abdul Rahim SN, Abu Bakar MF, Ibrahim SN, Kamaruddin S, Latif MT, et al.
    Data Brief, 2018 Aug;19:2416-2419.
    PMID: 30229114 DOI: 10.1016/j.dib.2018.07.020
    Lichen is a symbiotic organism that exists as a single composite body consisting of a mycobiont (fungus) and a photobiont (algae or a cyanobacterium). Many lichen species are considered as extremophiles due to their tolerance to radiation, desiccation, temperature and pollution. However, not all lichen species are tolerant to harsh environmental conditions as several species are sensitive for example to nitrogen, sulphur, acidity, heavy metals, halogens (e.g. fluoride) and ozone. Thus, to better understand why some lichens can withstand exposure to pollutants as opposed to those that are susceptible, we focused on the lichen species of Dirinaria known for their wide distribution in the tropics, subtropics and pantropical, and moderate tolerance to air pollution. Their moderate tolerance to air pollution affords them to thrive in good air quality environments as well as polluted air environments. Lichen samples of Dirinaria sp., UKM-J1 and UKM-K1, were respectively collected from two areas with different levels of air quality based on Air Pollutant Index or API (with index pollutant criteria of PM10, carbon monoxide, ozone, nitrogen dioxide and sulfur dioxide) in the outskirt of Jerantut (UKM-J1), a rural area in the middle of Peninsular Malaysia and the township of Klang (UKM-K1), in a busy area of the Klang Valley, Malaysia. API was monitored throughout 2012-2013 whereby the sample collection site in Klang showed markedly higher concentrations of pollutants in all the index pollutant criteria as compared to that of Jerantut. We performed transcriptome sequencing using Illumina RNA-seq technology and de novo assembly of the transcripts from the lichen samples. Raw reads from both libraries were deposited in the NCBI database with the accession number SRP138994.
    Matched MeSH terms: Fluorides
  16. Lee WH, Lai CW, Hamid SBA
    Materials (Basel), 2015 Aug 28;8(9):5702-5714.
    PMID: 28793530 DOI: 10.3390/ma8095270
    WO₃-decorated TiO₂ nanotube arrays were successfully synthesized using an in situ anodization method in ethylene glycol electrolyte with dissolved H₂O₂ and ammonium fluoride in amounts ranging from 0 to 0.5 wt %. Anodization was carried out at a voltage of 40 V for a duration of 60 min. By using the less stable tungsten as the cathode material instead of the conventionally used platinum electrode, tungsten will form dissolved ions (W(6+)) in the electrolyte which will then move toward the titanium foil and form a coherent deposit on the titanium foil. The fluoride ion content was controlled to determine the optimum chemical dissolution rate of TiO₂ during anodization to produce a uniform nanotubular structure of TiO₂ film. Nanotube arrays were then characterized using FESEM, EDAX, XRD, as well as Raman spectroscopy. Based on the FESEM images obtained, nanotube arrays with an average pore diameter of up to 65 nm and a length of 1.8 µm were produced. The tungsten element in the samples was confirmed by EDAX results which showed varying tungsten content from 0.22 to 2.30 at%. XRD and Raman results showed the anatase phase of TiO₂ after calcination at 400 °C for 4 h in air atmosphere. The mercury removal efficiency of the nanotube arrays was investigated by photoirradiating samples dipped in mercury chloride solution with TUV (Tube ultraviolet) 96W UV-B Germicidal light. The nanotubes with the highest aspect ratio (15.9) and geometric surface area factor (92.0) exhibited the best mercury removal performance due to a larger active surface area, which enables more Hg(2+) to adsorb onto the catalyst surface to undergo reduction to Hg⁰. The incorporation of WO₃ species onto TiO₂ nanotubes also improved the mercury removal performance due to improved charge separation and decreased charge carrier recombination because of the charge transfer from the conduction band of TiO₂ to the conduction band of WO₃.
    Matched MeSH terms: Fluorides
  17. Ramesh M, Narasimhan M, Krishnan R, Aruna RM, Kuruvilla S
    J Oral Maxillofac Pathol, 2017 Sep-Dec;21(3):345-350.
    PMID: 29391706 DOI: 10.4103/jomfp.JOMFP_247_16
    Background: Fluoride is needed for the normal development of bone and teeth; in high levels, it affects developing teeth and bone. Dental fluorosis (DF) is caused by ingestion of excess fluoride mainly through drinking water.

    Aim: The present study aims to observe and understand the histological changes of fluorosed teeth under light microscope (LM).

    Materials and Methods: Teeth which were indicated for extractions for orthodontic or periodontal problems were selected. Thirty extracted teeth were selected with varying degrees of DF based on modified Dean's fluorosis index. Ground sections of these teeth were prepared and the sections were studied under binocular LM. Photomicrographs were taken under high power objective using 15 megapixels Nikon camera.

    Results and Conclusion: Qualitative histologic changes in different grades of fluorosed teeth were evaluated in enamel, dentin, cementum and between their junctions. Fluoride interacts with enamel in both mineral phases and organic macromolecules by strong ionic and hydrogen bonds resulting in incomplete crystal growth at prism peripheries. This presents as hypomineralization of enamel and dentin, increased interglobular dentin, increased secondary curvatures and changes in cementum such as diffuse cementodentinal junction and increased thickness of Tomes' granular layer. Changes in the structure of the teeth with Dean's index below 2 and teeth with Dean's index of 2 and above were compared using Chi-square test. P value was found to be highly significant being 0.00047. Many of the features of dental fluorosis seen in the present study under light microscope are comparable to those results studied under specialized microscopes.
    Matched MeSH terms: Fluorides
  18. Chapain KP, Rampal KG, Gaulee Pokhrel K, Adhikari C, Hamal D, Pokhrel KN
    BMC Oral Health, 2023 Feb 01;23(1):59.
    PMID: 36726123 DOI: 10.1186/s12903-023-02755-z
    BACKGROUND: Oral health problems are highly prevalent among school children in Nepal. Poor oral health condition may be influenced by various factors. However, little is known about the sociodemographic and awareness related factors on oral health problems among school children in Nepal. Therefore, this study aimed to assess the association of gender and knowledge on DMFT index among school children.

    METHODS: A cross-sectional study was conducted among school children of Grade Seven in 12 schools of Kaski district in Nepal. Schools were randomly selected from the urban and semi-urban areas in the district. Data were collected covering oral health knowledge, socio-demographic characteristics, oral health condition and practices. The factors of poor oral health condition and practices were examined using t-test, one-way ANOVA, and multiple linear regression.

    RESULTS: Of the total participants (n = 669), 54.9% were females and their mean DMFT score was 1.82 (SD = 1.07). Total decayed score was higher among those who did not have knowledge that fluoride prevents decay compared to those who had knowledge about it (Being aware of fluoride prevents decay: Mean = 1.21 (SD = 1.54) versus not being aware of that: mean = 2.13 (SD = 2.13); p = 0.029). Females were more likely to have higher DMFT scores compared to males (β-coefficient = 0.43, 95% CI 0.13, 0.73, p = 0.005). In addition, higher knowledge score was negatively associated with higher DMFT score (β-coefficient = - 0.09, 95% CI - 0.20, -0.01, p = 0.047).

    CONCLUSION: Being female students and those having lower level of knowledge on oral health attributed to higher DMFT index. Periodic dental check-up coupled with oral health education on regular brushing, use of fluoridated paste, tongue cleaning and care of gum diseases are recommended in schools.

    Matched MeSH terms: Fluorides
  19. Pillai P, Lakhtaria Y, Dharaskar S, Khalid M
    Environ Sci Pollut Res Int, 2020 Jun;27(17):20606-20620.
    PMID: 31368069 DOI: 10.1007/s11356-019-05948-8
    A novel nanoparticle (NPs) iron oxyhydroxide modified with rice husk (RH + FeOOH) was synthesized with wet chemical method. Batch study was performed to investigate fluoride removal and adsorption capacity. The RH + FeOOH NPs were characterized by using Fourier transform infrared spectroscopy, X-ray powder diffraction, Brunauer-Emmett-Teller, scanning electron microscope with energy dispersion, transmission electron microscope, and particle size analyzer. By varying parameters, batch adsorption with adsorption capacity was performed such as contact time, stirring rate, adsorbent dosage, temperature, initial concentration, and pH. The BET surface area and the pore volume of the FeOOH and RH + FeOOH were found to be 157 m2 g-1, 195 m2 g-1 and 0.136 m2 g-1, 0.224 m2 g-1. Based on kinetic study, pseudo-second-order was followed by regression coefficient (R2) 0.99. Langmuir isotherm model showed the best adsorption capacity of 26 mg g-1. Moreover, the RH + FeOOH showed best affinity towards fluoride removal and may act as an excellent adsorbent for fluoride treatment from aqueous solution. Synthesis and Fluoride Adsorption Mechanism of Iron Oxyhydroxide Modified with rice husk.
    Matched MeSH terms: Fluorides
  20. Nazita Y, Jaafar N, Doss JG, Rahman MM
    Community Dent Health, 2013 Mar;30(1):30-3.
    PMID: 23550504
    To assess the knowledge, attitudes and practices of Imams (Islamic clerics) concerning fluoride toothpaste and fluoridated water to improve oral health in Kelantan.
    Matched MeSH terms: Fluorides/therapeutic use*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links