Epoxidised Natural Rubber (ENR) is now a commercially available polymer produced by chemical modification of natural rubber. Currently, three types of ENR are commercially available, and these are ENR 10, ENR 25, and ENR 50 with 10%, 25%, and 50% mol epoxidation, respectively. Studies on prevulcanisation of ENR 50 and postvulcanisation of the latex films were carried out. The objective of this study was to develop ENR 50 that could be dipped easily in coagulant dipping solution to produce dipped products. Several attempts were made by compounding prevulcanised ENR 50 at various sulphur levels ranging from 0.5 to 3.0 pphr. Using suitable coagulant dipping systems, ENR 50 film could be formed despite the high contents of non-ionic surfactant. It was found that the tensile strength of prevulcanised ENR 50 film decreased with the increase in the sulphur level. The results show that as level of sulphur increased, M300 also increased to an optimum value of 1.5 pphr of sulphur. For the postvulcanised ENR 50 film, however, the tensile strength increased and then decreased with the increasing sulphur level. Meanwhile M300 increased with the increasing postvulcanization time and sulphur level. The postvulcanisation of ENR 50 film seems to be a more effective way of increasing tensile properties than by prevulcanisation of ENR 50.
Tetragonal Y2O3 stabilized Zirconia (t-Y-ZrO2) powders were doped with Nb2O5 to seek a possibility if electronics doping would enhance the electronics conductivity of the insulating oxide. In this work Y2O3 was added as a stabilizer to produce tetragonal ZrO2 whereas Nb2O5 was added for the electronic doping. Several compositions of powders were prepared by thermal decomposition method and were post annealed at different temperatures. Precursor solutions were prepared from the mixture of zirconyl nitrate, yttrium nitrate and niobium tartarate as well as TEA (triethanolamine). The mixed solution were evaporated, pyrolysed and calcined to produce nanosized powders. The phase formation of the as-made powders was investigated by x-ray diffractometer. The additions of 7% Y2O3 were found to stabilize the tetragonal phase of zirconia.
The addition of Nb2O5 did not alter the stability of the tetragonal phase but it was found that the conductivity of the material has changed. The band gap as measured by the UV-Visible Spectrometer gave a value in the range of 2.97 to 5.01 eV. XRD was also used to deduce the crystallite size (by using Scherer’s equation) and transmission electron microcopy was used to view the particle sizes and shapes. The Nb doped t-Y-ZrO2 prepared in this work was to be nanosized crystal with size ranges from 7 nm to 15 nm.
Background: Social support is the perception that one is cared for, has assistance available from friends and significant others. Social support can be measured by The Multidimensional Scale of Perceived Social Support. This scale has been widely used and validated in different languages. Objective: To determine the factor structure of The Multidimensional Scale of Perceived Social Support scale and find its reliability. Method: The study was conducted in one of the Universities in Malaysia. The undergraduate students who volunteered to participate in the study were explained about the purpose of the study and implications. The English version of Multidimensional Scale of Perceived Social Support scale (MSPSS) that was administered. In all 313 undergraduate students were studied. Exploratory factor analysis, with varimax rotation, was applied to the data Results: The three factor solution accounted for 80.51 % of the total variance. The procedure output has an overall alpha of 0.921. Conclusion: The MSPSS appears to be good enough to be used in Malaysia however more studies are required.
Utilization of palm kernel expeller (PKE), a palm oil milling by-product, may be diversified through the exploitation of its protein component. The PKE protein could be effectively extracted using an alkaline
solution and followed by enzymatic hydrolysis to produce PKE protein hydrolysates or crude PKE peptide. The extraction of PKE protein was successfully carried out using an alkaline solution at pH11, at ratio of 1:10 (g/ml), PKE powder to alkaline solution with continuous shaking, 150 rpm, in a water bath operating at 50°C for 30 min. The extracted protein powder (PKEP) had 68.50±3.08% crude protein, 0.54±0.03% fat and 0.73±0.02% ash. The freeze-dried PKEP was re-suspend in particular buffer and hydrolyzed with proteolytic enzymes (Alcalase® 2.4L, Flavourzyme® 500MG, pepsin or trypsin) to obtain PKEP hydrolysate (PKEPH). The effect of enzyme concentration (0, 2, 4, 6, 8 & 10%) and time of hydrolysis (0, 6, 12, 24, 48 h) was studied to determine the most efficient hydrolytic conditions. Results showed that all enzymes tested were capable of hydrolyzing the PKEP and producing hydrolysates with different degree of hydrolysis (DH%). At 8.0% concentration, Alcalase®2.4L hydrolyzed PKEP into the highest DH (75.96%) hydrolysate (PKEPH) after 1h hydrolysis. Although only with 2.0% Alcalase 2.4 L concentration, it was sufficient to produce PKEP hydrolysate of 81.35% DH %, but it required 12 h to hydrolyze the protein. Pepsin was relatively the least efficient protease to hydrolyze the PKEP.
Melaleuca cajuputi and Acacia auriculiformis trees are major sources of nectar and pollen for Apis dorsata and the colonies are a major source of honey to the rural poor, honey hunters. Honey is a supplementary income to many of these people (including school children) in the Marang district, Terengganu. In this study, Marang area with 270 square kilometers was chosen as pilot study area in Terengganu state for mapping M. cajuputi and A. auriculiformis as two dominant species in low land secondary forest in Terengganu state.To inventory and produce land use map of Melaleuca forest in Marang area, in this study SPOT-5 satellite image in multispectral mode with 10 meter resolution which is acquired in 2007 as optical satellite was utilized. Most images from optical satellites have some null data from ground because of clouds and shadow of clouds. To solve this problem, Hue, Saturation and value (HSV) and Principal Component Analysis (PCA) were used as fusion techniques to replace null data with microwave data which taken from Radarsat-1 image in C-band with 25 meter resolution image. Accordingly, fusion technique which was used in this research not only was a technique to improve information but also caused the accuracy increasing than land use map by just only SPOT-5 image. Also between two different fusion techniques, PCA shows the better result than HSV as two different fusion techniques.
A technique to isolate DNA from ghee was developed for the authentication of beef fat product. The method was based on pre-mixed ghee with phosphate buffer solution (PBS) prior to DNA extraction using Epicentre extraction method. The recovery of beef DNA was then analysed by polymerase chain reaction (PCR) using beef species-specific oligonucleotide primers which targeted the mitochondria DNA (mtDNA) of cytochrome b (cyt b) gene. The amplicon was 274 bp in size. The developed ghee extraction method offers a high yield of DNA providing 100 ng per μl and useful for validating beef fat product.
Formalin is a clear solution of 37% formaldehyde in water. It is used in dentistry as a disinfectant, antiseptic and mainly as tissue fixative for preserving biologic specimens for histopathologic examination. The human knowledge on systemic formaldehyde intoxication is inadequate as only few cases of formalin ingestion have been reported. This paper presents a brief communication of the adverse effect of formalin to the human tissue.
The accumulation of tear film proteins as well as microbes colonization onto worn contact lenses can be eliminated conventionally by mechanical rubbing during the cleaning process. Lens2® functions in rotation manner to loosen the deposits on the contact lens and has antimicrobial coating to keep lenses away from contamination. The objective of this study was to determine the efficiency of Lens2® to remove deposited protein and reduce microbial contamination compared to conventional method. Twenty-eight subjects each wore a pair of contact lens FDA Group 1 (Polymacon, SoftLens® 38, Bausch & Lomb) for one month and cleaned them using multipurpose solution (COMPLETE® MoisturePLUSTM, Advanced Medical Optics) separately using two different methods. The right lens was cleaned conventionally while the left lens were cleaned using the Lens2®. The control group of thirteen subjects each wore a pair of contact lens for the same period and cleaned both conventionally. These lenses and its cases were then analyzed for protein deposition using Bichinchoninic Acid Assay (BCA) Kit (Sigma, USA) in 96-well plate. Microbial contamination was determined by culturing the samples on nutrient agar for bacteria and fungi and non-nutrient agar for amoeba isolation. The mean of total protein on control lenses (17.014 ± 13.246 µg/mL) was not significantly different from those on the Lens2® (21.623 ± 19.127 µg/mL). There were also low growth numbers of amoeba in each group of samples. Interestingly, there were no growths of amoeba from all Lens2® samples collected. There was also low growth numbers of bacteria in each sample group whereby Lens2® had the lowest growth of bacteria. No growth of fungi was obtained from all samples. The automatic lens cleaner, Lens2® was found to be as efficient as the conventional cleaning method. However, the Lens2® has additional advantage because of its antimicrobial material and need shorter time in the cleaning process as well as easy and effective.
Introduction: The purpose of the present study was to investigate exploratory factor analysis of the
Beck Anxiety Inventory (BAI) and reports its reliability and validity in Malaysia. Method: One thousand
and ninety participants from four different samples (namely students, general population, medical and
psychiatric patients) completed the Malay version of Beck Anxiety Inventory, as well as additional
questionnaires such as Fear Questionnaire, Anxiety Sensitivity Index, Depression Anxiety Stress Scale, and Catastrophic Cognition Questionnaire. Results: Exploratory factor analysis revealed a three factor solution and accounted for 48.01% of the total variance. The three-factor structure appeared to be; subjective anxiety, autonomic, and neurophysiology. The Cronbach alpha coefficients (α) ranged from 0.66 to 0.89 with satisfactory overall alpha value (.91). Evidence was also found acceptable concurrent validity of the BAI-Malay (range between r=.22 to r=.67). Conclusion: This study shows that the BAIMalay is a reliable and valid instrument to measure symptoms of anxiety in the Malay population
and can be used in research and clinical service in Malaysia. However, replication of study by using
confirmatory factor analysis and application of the instrument among anxiety patients worth of further
investigation.
Oil blending has been recognized as one of the most potent solution in producing vegetable oils with good storage stabilities and optimum fatty acids compositions. This study was conducted to identify the best oil blends in terms of physicochemical properties between canola, olive and palm olein oil. Canola and olive oils were blended at different ratios of 80:20, 60:40, 50:50, 40:60, and 20:80. Palm olein is stable against rancidity and oxidation thus the above blends were mixed with 20% palm olein. The 80:20 canola: olive blend shows the best properties after being mixed with 20% palm olein compared to other blends. It passed the cold stability test and has significantly the lowest cloud point of 6.0oC (p
Dye-sensitized solar cell (DSSC) is the third generation of thin film solar cell. In this work, carrot fruit dye was prepared and used in DSSC as a sensitizer. TiO2–ZrO2 fine binary oxide was mechanochemically prepared and made paste. TiO2–ZrO2 paste (colloidal) was deposited onto FTO/glass in two ways, i.e. as single and double coatings by rolling method. It was immersed in the carrot solution to get dyed cell. The dyed TiO2-ZrO2-FTO/glass cell was offset with the FTO/glass cell coated with adhesive carbon paste. Photovoltaic properties of prepared TiO2–ZrO2 DSSC cell were measured. Results showed that the efficiency of double coating cell was greater than that of the single coating cell. According to the fill factor from the experiments, both the DSSC cells were acceptable for industrial requirement. Hence, it can be concluded that the results obtained were acceptable in the use of cost-effective and eco-favourable dye-sensitized solar cell.
A stability-indicating HPLC-UV method for the simultaneous determination of sildenafil citrate and dapoxetine hydrochloride in solution and tablet was developed. The mobile phase was comprised of acetonitrile and 0.2M ammonium acetate buffer. The analyte was eluted at 3.392min and 7.255min for sildenafil citrate and dapoxetine HCl respectively using gradient system at a flow rate of 1.5mL/min. The theoretical plates count was>2000, tailing factor
This paper presents the solution to a calculation of the pH of a very dilute solution of a weak acid, taking into account the effect of the hydroxonium ions generated from the ionization of the acid on the ionization of water, also a very weak acid. To be solved successfully, this calculation involves the concepts of conservation of charge, pH, equilibria and the application of the general solution to a cubic equation. Such an exercise requires the application of skills in algebra, and can provide a core of understanding that can prepare advanced students for many different sorts of calculations that represent real-life problems in the chemical sciences. A programme is presented in C++ which enables the work of students to be individualized so that each student in a class can work through a slightly different pH calculation, in such a way that a class supervisor can quickly check each student’s result for accuracy.This exercise is presented as a potential means of enabling students to undertake and master similar types of calculations involving the application of complex algebra to problems related to equilibria and solution dynamics.
This study was conducted using crab shells as a biosorbent to remove Cu and Cd with different initial concentrations of 1, 5, 10, 15, and 20 mg/L in a biosorption treatment process. Crab shells were selected as biosorbents due to their abundance in the environment and ready availability as waste products from the market place. This study aimed to determine the ability of Scylla Serrata shells to remove Cu and Cd in an aqueous solution, as well as to provide a comparison of the removal rate between the two metals. The data were incorporated into hydrochemical software, PHREEQC, to investigate the chemical speciation distribution of each heavy metal. The shells of S. serrata were found to have a significant (p< 0.05) ability to remove Cu and Cd following the treatment. After six hours of treatment, the crab shells had removed 60 to 80% of both metals. However, the highest removal percentage was achieved for Cu with up to 94.7% removal rate in 5 mg/L initial Cu concentration, while 85.1% of Cd was removed in 1 mg/L initial solution, respectively. It can be concluded that the shells of S. serrata could remove Cu and Cd better with significant results (p
The impact of good assessment in medical education depends on how appropriately the tools measure the clinical performance and how reliable, valid and feasible they are to achieve the logical decision. The traditional methods of clinical examination using long and short cases and orals are often argued for its subjectivity, low reliability and inadequate context specificity. Oral test though comparatively more valid due to its face-to-face questions are considered less reliable for problems of unstandardized questions, inconsistent marking and lack of sufficient testing time. Development of an “objective structured clinical examination” (OSCE) was sought as a solution to these problems. But the fragmented representation of the context in a number of stations in OSCE makes it less authentic for an integrated judgment of performance. Yet another method to thought of, was the workplace-based assessment (WPBA) but it takes a snapshot as a predefined attribute of a more complex integrated assessment such as long case. However due to the problem of feasibility it is less likely that high stakes examination as summative assessment will ever be able to attain workplace-based assessment such as Mini-CEX and DOPS. A TOACS (task oriented assessment of clinical skills) format currently used in high stakes fellowship examination in one of the center and claimed to have more active role for examiners was analyzed and compared with OSCE. Author however, did not find a difference except the difference of acronyms of the two formats. Both have multiple, fragmented static or interactive stations of 5-10 minutes duration with or without examiners, patients or exhibits and a marking scheme comprising of checklist or global rating. In the backdrop of this context a new assessment format named the ‘task integrated objective structured clinical examination” or TIOSCE modified from OSCE is currently developed in School of Medical Sciences (SMS) at USM. However, it is a different version of OSCE in which though the principle concept is the same as that of an OSCE, the continuum of clinical skill’s work up of the same patient’s is followed through to test multiple short attributes of clinical competences. As it retains most of the favorable features, TIOSCE also addresses some of the odds features of OSCE.
The aim of this study was to determine the efficiency of different human amniotic membrane (HAM) processing methods on the concentration, purity and integrity of RNA. Two different techniques (Technique1 andTechnique2) were employed for the processing of HAM, which differed in terms of washing solution, sample storage conditions and processing time. Based on preservation of HAM, three groups were formed under each technique. In Technique 1, the groups were fresh frozen 1 (F1), glycerol preserved (GP) and gamma irradiated glycerol preserved (IGP); where else in Technique 2, the groups were fresh frozen 2 (F2), 50%glycerol/Dulbecco’s modified Eagle medium (DMEM) cryopre served HAM diluted with phosphate buffered saline(GB) and 50% glycerol/DMEM cryop reserved HAM diluted with diethyl procarbonate water (GD). Total RNA was extracted from the samples and their concentration, purity and integrity were examined. The F2 sample of which there was no pre-washing step and involved direct sample storage at-80oC, shorter processing time and chilled processing conditions had yielded better quality of RNA compared to the others.
In this paper, a mathematical model is developed based on mass and momentum balance for carbon dioxide absorption into aqueous ammonia solution. The model is simplified based on the assumption that the CO2 absorption into aqueous ammonia is a pseudo-first-order reaction. Laplace transform method is applied in order to solve the partial differential model equation. Finally, the CO2 molar flux is expressed as a function of partial pressure of CO2, concentration of aqueous ammonia, temperature and gas-liquid contact area. Variation of CO2 molar flux with partial pressure of CO2 and temperature is discussed and a comparison is performed with experimental data from literature. Variation of CO2 molar flux is also shown with gas-liquid contact area. The calculated flux from the model follows the same trend as that of the experimental data reported in literature and the accuracy is within the accepted limit. The mathematical model is very helpful to predict the CO2 molar flux as a function of partial pressure of CO2, concentration of aqueous ammonia, temperature and gas-liquid contact area.
Lattice Boltzmann Model for Shallow Water Equation with Turbulence Modeling (LABSWETM) is used to study the flow patterns of sidewall friction effects. The lattice Boltzmann method (LBM) approach in recovery the macroscopic governing equation which is shallow water equation from the microscopic flow behavior of particle movement as described by kinetic theory is explored. With the solution of force term to be used in lattice Boltzmann equation, the boundary condition of LBM is explored. With the use of bed and wall friction coefficients, the importance of Manning’s coefficient in determining the outcome of flow patterns simulation is explained. For model verification, the model represents a straight channel with a circular cavity attached to it. The result of this simulation includes the water circulation patterns, cross-section of average velocity distribution, and water depth. For validation, the cross-sections of the model in term of velocity vectors are compared against alternative numerical and experimental data.
Many studies have been carried out using different metaheuristic algorithms on optimisation problems in various fields like engineering design, economics and routes planning. In the real world, resources and time are scarce. Thus the goals of optimisation algorithms are to optimise these available resources. Different metaheuristic algorithms are available. The firefly algorithm is one of the recent metaheuristic algorithms that is used in many applications; it is also modified and hybridised to improve its performance. In this paper, we compare the Standard Firefly Algorithm, the Elitist Firefly Algorithm, also called the Modified Firefly Algorithm with the Chaotic Firefly Algorithm, which embeds chaos maps in the Standard Firefly Algorithm. The Modified Firefly Algorithm differs from the Standard Firefly Algorithm in such a way that the global optimum solution at a particular iteration will not move randomly but in a direction that is chosen from randomly generated directions that can improve its performance. If none of these directions improves its performance, then the algorithm will not be updated. On the other hand, the Chaotic Firefly Algorithm tunes the parameters of the algorithms for the purpose of increasing the global search mobility i.e. to improve the attractiveness of fireflies. In our study, we found that the Chaotic Firefly Algorithms using three different chaotic maps do not perform as well as the Modified Firefly Algorithms; however, at least one or two of the Chaotic Firefly Algorithms outperform the Standard Firefly Algorithm under the given accuracy and efficiency tests.
Introduction: Knowledge, attitude as well as adoption of pharmacogenomics in clinical practice among the pharmacists and physicians in Malaysia have not been reported. This cross-sectional study explores various facets of the two professions as related to pharmacogenomics to determine the need and preferred method to improve education among them. This study also aims to identify the current state of pharmacogenomics practice in Malaysia to help identify barrier and solution to reap advantages from pharmacogenomics practices. Methods: A questionnaire consisting of 38 questions in five parts was adopted and validated. It explores the respondents’ characteristics, attitude, knowledge, adoption and education. It was distributed online to 1500 pharmacists and physicians over five months. Results: Pharmacists differed from the physicians in terms of attitude, knowledge, adoption and education. Overall, adoption rate of pharmacogenomics was found to be low but its anticipation for future adoption is high, and benefits were reported by healthcare professionals who have used the test in a clinical setting. Majority of respondents had poor to fair knowledge and nearly half have had no prior formal teaching on pharmacogenomics. Interest in the education is very high, and most of them preferred to learn pharmacogenomics via continuous professional education programs. Conclusion: Pharmacogenomics is a field that promises many benefits, but to reap these benefits require its implementation in clinical setting. Pharmacists and physicians need to be equipped with adequate knowledge and positive attitude towards pharmacogenomics.