Displaying publications 61 - 80 of 141 in total

Abstract:
Sort:
  1. Nishi SE, Basri R, Rahman NA, Husein A, Alam MK
    J Orthod Sci, 2018;7:3.
    PMID: 29765915 DOI: 10.4103/jos.JOS_74_17
    OBJECTIVES: The aim of the study was to assess the association and correlation between the overjet and muscle activity (the masseter and temporalis muscles) in patient with Class II malocclusion in different genders using surface electromyography (sEMG).

    MATERIALS AND METHODS: The overjet (measured clinically) and electromyographical activity (rest, chew, post chew rest, clench and post clench rest) of the masseter and temporalis muscle of class II malocclusion patient were assessed in 18 patients (3 males and 15 females) from the School of Dental Science, Hospital University Sains Malaysia.

    RESULTS: The results were compared by simple linear regression test to evaluate the association between overjet and muscle activity in different genders. Class II malocclusion patients with increased overjet group showed significant association with masseter muscle activity on chewing stage (P = 0.005, F = 6.081 and adj-R2 = 0.473). Left temporalis muscle in class II malocclusion showed a significant linear association (P = 0.014, F = 0.812 and adj-R2= -0.034) with gender during clench.

    CONCLUSION: In conclusion, class II malocclusion patient with increased overjet can affect masticatory muscle function and as well as clench force may differ in gender.

  2. Abutayyem H, Alam MK, Kanwal B, Alswairki HJ, Alogaibi YA
    J Orthod Sci, 2023;12:51.
    PMID: 37881658 DOI: 10.4103/jos.jos_53_23
    Infection control is essential to protect both the doctor and the patient by preventing the spread of infectious diseases. There is no exception in the field of dentistry, particularly in orthodontics, where numerous appliances are used for a variety of functions and also because the mouth cavity has the highest concentration of bacteria of any body part. Through this systematic review, we aimed to assess the various methods of sterilization employed in an orthodontic setting. Using relevant keywords, reference searches, and citation searches, the databases such as PubMed, MEDLINE, Web of Science, Cochrane, and Scopus were all searched; a total of 206 documents were found, of which 113 were initially selected. The remaining 23 distinct papers were initially made available after 90 publications that were identical to or similar to one another were eliminated. The final selection was made from eight documents that met all inclusion and exclusion requirements. The existing methods of sterilization were found to be competent in dealing with the microorganisms found in a typical orthodontic setting. The chemical method of sterilization was the norm in most of the studies that we assessed, with glutaraldehyde and peracetic acid (PAA) being the most commonly employed compounds for disinfection. PROSPERO Registration Number: CRD42022380831.
  3. Alam MK, Abutayyem H, Alswairki HJ, Hajeer MY, Alogaibi YA
    J Orthod Sci, 2023;12:41.
    PMID: 37881655 DOI: 10.4103/jos.jos_85_23
    The nutritional needs already increased by adolescent growth, activity, and stress are further exacerbated by the physical, physiological, and psychological stress that orthodontic treatment causes. Hence, the main objective of this systematic review was to analyze the relationship between adequate nutrition and its impact on orthodontic treatment success rates. Using relevant keywords, reference searches, and citation searches, the databases such as PubMed-Medical Literature Analysis and Retrieval System Online, Web of Science, Cochrane, and Scopus were all searched. "Diet," "Minerals," "Nutrition," "Orthodontics," and "Vitamins" were the search terms used to scour the database. The 10 studies selected for the systematic review and subsequent meta-analysis could not conclusively establish the correlation between proper nutrition and its impact on orthodontic treatment of the patient. There was virtually little connection between patients' dietary intake and the effectiveness of their orthodontic treatment. Additionally, a direct causal link between the two could not be established legitimately because the majority of the studies reviewed only noted an impact during the early stages of the treatment. PROSPERO Registration Number: CRD42022380828.
  4. Abutayyem H, Alam MK, Kanwal B, Alswairki HJ, Alogaibi YA
    J Orthod Sci, 2023;12:50.
    PMID: 37881657 DOI: 10.4103/jos.jos_52_23
    A variety of metals and alloys are employed in the field of orthodontics, primary of which happen to be the construction of wires. Through this systematic review, we aimed to assess the various metallurgical characteristics of the said metals and alloys. Four hundred and eighty-two documents in total were found after a thorough search of the online journals, and 169 of the papers were initially chosen. Ultimately, 16 documents were selected that satisfied the necessary inclusion and exclusion criteria, primarily in vitro studies, literature reviews, and comparative analyses. NiTi alloy was found to be the most commonly used alloy in construction of orthodontic wires across all the studies that we had selected for our review. It also had better performance and consistency in terms of its usage as depicted by the meta-analysis performed, with stainless steel wires being a close second primarily due to its lesser cost compared to the former. Metallurgy and orthodontics are inextricably linked with one another. The various components of orthodontics such as wires, pliers, and other instruments utilize the metallurgical characteristics of metals and alloys that are specially prepared for the challenges of this field. PROSPERO Registration Number: CRD42022378444.
  5. Qamaruddin I, Alam MK, Shahid F, Tanveer S, Umer M, Amin E
    Saudi Dent J, 2018 Jan;30(1):43-46.
    PMID: 30166870 DOI: 10.1016/j.sdentj.2017.10.002
    Background: The analysis of skeletal relationships of jaws in the sagittal plane is of utmost importance in orthodontic diagnosis for which numerous lateral cephalometric analyses have emerged. None of the analyses is without flaws. Current study compares ANB, Wits appraisal, Beta angle, Yen angle and W angle for their validity and reliability in diagnosis of skeletal classes.

    Methods: Pretreatment cephalograph of 209 orthodontic patients comprised of 92 males and 117 females were selected from orthodontic archives. Radiographs were traced for ANB, Wits appraisal, Beta angle, W angle and Yen angle measurements. Patients were divided into three skeletal classes i.e. class I, II and III based on measurements and incisor classification and profile recorded from their files. ANOVA was applied to check the validity of performed analyses and Cramer's correlation was performed to find out the correlation between analyses and skeletal classes.

    Results: All performed analyses showed statistically significant difference in the values for all three skeletal classes p 

  6. Alam MK, Arshad AI
    Cleft Palate Craniofac J, 2015 Sep;52(5):634.
    PMID: 25405544 DOI: 10.1597/14-258
  7. Haque S, Alam MK, Arshad AI
    Malays J Med Sci, 2015 Jan-Feb;22(1):4-11.
    PMID: 25892945 MyJurnal
    In the contemporary era, the demand for orthodontic treatment is ever rising. Orthodontic treatment duration can range from a year to a few years. Our aim is to assess the available techniques of categorising treatment effectiveness in patients with cleft lip and palate (CLP) and to study their effect on improvement of treatment outcomes. The electronic databases including Medline-PUBMED, Science Direct, and ISI Web of Knowledge were searched from 1987 to 2013, and 40 311 relevant articles were found. Of these, we identified 22 articles including original articles as well as literature reviews. The different parameters and indices that are applied to speed-up orthodontic treatment outcomes in patients with CLP were identified as the GOSLON Yardstick, 5-year-old index, EUROCRAN index, Huddart Bodenham system, modified Huddart Bodenham system, GOAL Yardstick and, Bauru-Bilateral Cleft Lip and Palate Yardstick. This overview can create better awareness regarding the uses, advantages, and disadvantages of the different indices. It can enable better assessment and provide the impetus needed for a sustained upgrade in the standards of care for CLP in daily orthodontics.
  8. Ahmad P, Alam MK, Jakubovics NS, Schwendicke F, Asif JA
    J Dent Res, 2019 Dec;98(13):1425-1436.
    PMID: 31746684 DOI: 10.1177/0022034519880544
    Since its inception in 1919, the Journal of Dental Research has continually published high-quality articles that span the breadth of research topics relevant to dentistry, oral surgery, and medicine. As part of the journal's centennial celebration, we conducted an electronic search on Scopus to identify and analyze the top 100 most cited articles from 1919 to 2018. Since Scopus does not capture older citations, we conducted an additional analysis by Google Scholar to identify key articles published in the first 50 y of the journal. Based on Scopus, the articles were ranked in descending order per their citation counts. The citation counts of the 100 most cited articles varied from 262 to 1,503. The year in which the largest number of top 100 articles were published was 2004 (n = 6). Within the top 100, the majority of articles originated from the United States (n = 52). Research Reports-Biomaterials & Bioengineering was the most frequent category of cited articles (n = 35). There was no significant association between total citation count and time since publication (correlation coefficient = -0.051, P = 0.656). However, there was a significant negative association of citation density (correlation coefficient = -0.610, P < 0.01) with time since publication. Our analyses demonstrate the broad reach of the journal and the dynamics in citation patterns and research agenda over its 100-y history. There is considerable evidence of the high variance in research output, when measured via citations, across the globe. Moreover, it remains unclear how patients' priorities and dental health care needs are aligned with the perceived influence of single research pieces identified by our search. Our findings may help to inspire future research in tackling these inequalities and highlight the need for conceptualizing research priorities.
  9. Qamruddin I, Alam MK, Shahid F, Tanveer S, Mukhtiar M, Asim Z
    J Coll Physicians Surg Pak, 2016 May;26(5):390-3.
    PMID: 27225144 DOI: 2321
    OBJECTIVE: To determine and compare the cephalometric values among Pakistani males and females using commonly used sagittal skeletal measurements (ANB, Wits appraisal, Beta-angle) and newly developed cephalometric analyses (Yen-angle and W-angle).

    STUDY DESIGN: Observational, cross-sectional study.

    PLACE AND DURATION OF STUDY: Orthodontic Department of Baqai Medical University, Karachi, Pakistan, from August to October 2013.

    METHODOLOGY: Atotal of 209 pre-treatment lateral cephalometric radiographs of orthodontic patients were selected from departmental records, comprised of 92 males and 117 females. Radiographs were traced for measurements of ANB, Wits appraisal, Beta-angle, W-angle and Yen-angle. Patients were categorized into skeletal classes I, II, and III on the basis of performed measurements, incisor classification, and profile recorded from their records. Descriptive analysis was used to obtain median interquartile range in both the genders and Mann-Whitney U-test was used to observe gender dimorphism.

    RESULTS: Skeletal class II was the most prevalent type of malocclusion. There were no difference in the obtained measurements between males and females except the Wits appraisal and Beta-angle in class II patients, which showed significant difference in values (p < 0.05).

    CONCLUSION: Pakistani population has no significant different difference in the craniofacial morphology of males and females, with the exception of Wits-appraisal and Beta-angle in class II cases.

  10. Alam MK, Abutayyem H, Alzabni KMD, Almuhyi NHS, Alsabilah KAS, Alkubaydan FST, et al.
    Cureus, 2023 Aug;15(8):e44243.
    PMID: 37645665 DOI: 10.7759/cureus.44243
    The literature on the impact of temporomandibular disorders (TMDs) on orthodontic management or vice versa lacks clarity. This study presents a review that aims to evaluate the influence of TMDs on orthodontic management and explore the association between TMDs and various aspects of orthodontic treatment. A systematic search was conducted across multiple databases to identify relevant articles documenting the correlation between TMD incidence and orthodontic treatment to achieve the objectives. The selection process followed predefined criteria, and the selected studies underwent bias assessment using the AXIS tool and Cochrane risk of bias (RoB) tool. Among the articles identified, nine studies were deemed suitable for inclusion in the review. The findings from the subsequent meta-analysis indicated a significant overall effect, suggesting that orthodontic treatment may increase the risk of developing TMD. Furthermore, the analysis revealed that patients with TMD had higher odds of experiencing orthodontic issues than those without TMD. Subgroup analysis further demonstrated that orthodontic treatment could have a negative impact on the psychological well-being of TMD patients, while its effect on TMD incidence was found to be negligible. The results highlight the need for additional research to gain a better understanding of the underlying mechanisms and develop appropriate interventions aimed at minimizing the risk of TMD in patients undergoing orthodontic treatment. Clinicians should be aware of TMD as a potential complication of orthodontic treatment and implement appropriate monitoring strategies.
  11. Purmal K, Alam MK, Moganadass DD, Zakariat NN, Cheong NW
    Aust Orthod J, 2013 May;29(1):34-42.
    PMID: 23785936
    To assess the applicability of Pont's Index in a Malaysian population by obtaining baseline measurements of dental arch shape based on premolar arch width, molar arch width and the combined width of the maxillary incisors. A secondary aim was to determine whether a correlation exists between arch widths, Pont's Index and the facial framework.
  12. Farook TH, Rashid F, Alam MK, Dudley J
    Clin Oral Investig, 2023 Feb;27(2):489-504.
    PMID: 36577849 DOI: 10.1007/s00784-022-04835-w
    BACKGROUND: To explore the digitisation of jaw movement trajectories through devices and discuss the physiological factors and device-dependent variables with their subsequent effects on the jaw movement analyses.

    METHODS: Based on predefined eligibility criteria, the search was conducted following PRISMA-P 2015 guidelines on MEDLINE, EBSCO Host, Scopus, PubMed, and Web of Science databases in 2022 by 2 reviewers. Articles then underwent Cochrane GRADE approach and JBI critical appraisal for certainty of evidence and bias evaluation.

    RESULTS: Thirty articles were included following eligibility screening. Both in vitro experiments (20%) and in vivo (80%) devices ranging from electronic axiography, electromyography, optoelectronic and ultrasonic, oral or extra-oral tracking, photogrammetry, sirognathography, digital pressure sensors, electrognathography, and computerised medical-image tracing were documented. 53.53% of the studies were rated below "moderate" certainty of evidence. Critical appraisal showed 80% case-control investigations failed to address confounding variables while 90% of the included non-randomised experimental studies failed to establish control reference.

    CONCLUSION: Mandibular and condylar growth, kinematic dysfunction of the neuromuscular system, shortened dental arches, previous orthodontic treatment, variations in habitual head posture, temporomandibular joint disorders, fricative phonetics, and to a limited extent parafunctional habits and unbalanced occlusal contact were identified confounding variables that shaped jaw movement trajectories but were not highly dependent on age, gender, or diet. Realistic variations in device accuracy were found between 50 and 330 µm across the digital systems with very low interrater reliability for motion tracing from photographs. Forensic and in vitro simulation devices could not accurately recreate variations in jaw motion and muscle contractions.

  13. Alam MK, Alfawzan AA, Abutayyem H, Kanwal B, Alswairki HJ, Verma S, et al.
    Sci Prog, 2023;106(1):368504231156297.
    PMID: 36803068 DOI: 10.1177/00368504231156297
    The purpose of this meta-analysis was to strengthen the credibility of primary research results by combining open-source scientific material, namely a comparison of craniofacial features (Cfc) between Crouzon's syndrome (CS) patients and non-CS populations. All articles published up to October 7, 2021, were included in the search of PubMed, Google Scholar, Scopus, Medline, and Web of Science. The PRISMA guidelines were followed to conduct this study. PECO framework was applied in the following ways: Those who have CS are denoted by the letter P, those who have been diagnosed with CS via clinical or genetic means by the letter E, those who do not have CS by the letter C, and those who have a Cfc of CS by the letter O. Independent reviewers collected the data and ranked the publications based on their adherence to the Newcastle-Ottawa Quality Assessment Scale. A total of six case-control studies were reviewed for this meta-analysis. Due to the large variation in cephalometric measures, only those published in at least two previous studies were included. This analysis found that CS patients had a smaller skull and mandible volumes than those without CS.in terms of SNA° (MD = -2.33, p = <0.001, I2 = 83.6%) and ANB°(MD = -1.89, p = <0.005, I2 = 93.1%)), as well as ANS (MD = -1.87, p = 0.001, I2 = 96.5%)) and SN/PP (MD = -1.99, p = 0.036, I2 = 77.3%)). In comparison to the general population, people with CS tend to have shorter and flatter cranial bases, smaller orbital volumes, and cleft palates. They differ from the general population in having a shorter skull base and more V-shaped maxillary arches.
  14. Chowdhury MA, Jahan I, Karim N, Alam MK, Abdur Rahman M, Moniruzzaman M, et al.
    Biomed Res Int, 2014;2014:145159.
    PMID: 24711991 DOI: 10.1155/2014/145159
    In the present study, the residual pesticide levels were determined in eggplants (Solanum melongena) (n = 16), purchased from four different markets in Dhaka, Bangladesh. The carbamate and organophosphorus pesticide residual levels were determined by high performance liquid chromatography (HPLC), and the efficiency of gamma radiation on pesticide removal in three different types of vegetables was also studied. Many (50%) of the samples contained pesticides, and three samples had residual levels above the maximum residue levels determined by the World Health Organisation. Three carbamates (carbaryl, carbofuran, and pirimicarb) and six organophosphates (phenthoate, diazinon, parathion, dimethoate, phosphamidon, and pirimiphos-methyl) were detected in eggplant samples; the highest carbofuran level detected was 1.86 mg/kg, while phenthoate was detected at 0.311 mg/kg. Gamma radiation decreased pesticide levels proportionately with increasing radiation doses. Diazinon, chlorpyrifos, and phosphamidon were reduced by 40-48%, 35-43%, and 30-45%, respectively, when a radiation strength of 0.5 kGy was utilized. However, when the radiation dose was increased to 1.0 kGy, the levels of the pesticides were reduced to 85-90%, 80-91%, and 90-95%, respectively. In summary, our study revealed that pesticide residues are present at high amounts in vegetable samples and that gamma radiation at 1.0 kGy can remove 80-95% of some pesticides.
  15. Rashid MH, Fardous Z, Chowdhury MA, Alam MK, Bari ML, Moniruzzaman M, et al.
    Chem Cent J, 2016;10:7.
    PMID: 26900397 DOI: 10.1186/s13065-016-0154-3
    BACKGROUND: The aim of this study was to determine the levels of cadmium (Cd), chromium (Cr), lead (Pb), arsenic (As) and selenium (Se) in (1) fresh tea leaves, (2) processed (black) tea leaves and (3) soils from tea plantations originating from Bangladesh.

    METHODS: Graphite furnace atomic absorption spectrometry (GF-AAS) was used to evaluate six digestion methods, (1) nitric acid, (2) nitric acid overnight, (3) nitric acid-hydrogen peroxide, (4) nitric-perchloric acid, (5) sulfuric acid, and (6) dry ashing, to determine the most suitable digestion method for the determination of heavy metals in the samples.

    RESULTS: The concentration ranges of Cd, Pb, As and Se in fresh tea leaves were from 0.03-0.13, 0.19-2.06 and 0.47-1.31 µg/g, respectively while processed tea contained heavy metals at different concentrations: Cd (0.04-0.16 µg/g), Cr (0.45-10.73 µg/g), Pb (0.07-1.03 µg/g), As (0.89-1.90 µg/g) and Se (0.21-10.79 µg/g). Moreover, the soil samples of tea plantations also showed a wide range of concentrations: Cd (0.11-0.45 µg/g), Pb (2.80-66.54 µg/g), As (0.78-4.49 µg/g), and Se content (0.03-0.99 µg/g). Method no. 2 provided sufficient time to digest the tea matrix and was the most efficient method for recovering Cd, Cr, Pb, As and Se. Methods 1 and 3 were also acceptable and can be relatively inexpensive, easy and fast. The heavy metal transfer factors in the investigated soil/tea samples decreased as follows: Cd > As > Se > Pb.

    CONCLUSION: Overall, the present study gives current insights into the heavy metal levels both in soils and teas commonly consumed in Bangladesh.

  16. Uzbek UH, Rahman SA, Alam MK, Gillani SW
    J Clin Diagn Res, 2014 Dec;8(12):ZC73-6.
    PMID: 25654037 DOI: 10.7860/JCDR/2014/8557.5352
    An-organic bovine bone graft is a xenograft with the potential of bone formation. The aim of this study was to evaluate the bone density using cone beam computed tomography scans around functional endosseous implant in the region of both augmented maxillary sinus with the an-organic bovine bone graft and the alveolar bone over which the graft was placed to provide space for the implants.
  17. Alam MK, Awawdeh M, Aljhani AS, Alotaib GS, Abutayyem H, Alswairki HJ, et al.
    Children (Basel), 2023 May 15;10(5).
    PMID: 37238433 DOI: 10.3390/children10050885
    BACKGROUND AND OBJECTIVES: Investigation into the impact of dental trauma on the results of orthodontic treatment is crucial because it can have a major influence on patient care. However, there has not yet been a thorough review or meta-analysis of the available data, which is inconsistent and scant. Therefore, the goal of this systematic review and meta-analysis is to investigate the impact of dental trauma on orthodontic parameters. Search methods and criterion of selection: Major online databases were searched (beginning from the year 2011) for relevant articles using a properly defined search strategy. Analysis protocol: Risk of bias (RoB) and the Cochrane risk of bias tool were utilized for the purposes of bias evaluation within the individual studies and within the review, respectively.

    RESULTS: Out of the six clinical trials selected, a significant impact of trauma was observed in individuals in all but one paper. Gender predilection varied across studies and could not be conclusively determined. The follow-up period ranged from two months to two years in the trials. The odds ratio (OR) 0.38 [0.19, 0.77] and the risk ratio (RR) 0.52 [0.32, 0.85] indicated that both the odds as well as the relative risk of experiencing dental trauma were lower in the group with negligible impact compared to the group with noticeable impact. Conclusion and further implications: The findings show that dental trauma significantly affects orthodontic parameters, with lower risk and likelihood of suffering dental trauma in the group with negligible impact than in the group with noticeable impact. However, given the substantial heterogeneity among the studies, it is advised to exercise caution when extrapolating the findings to all populations. Registration and protocol: Registration in the PROSPERO database was carried out before initiating the investigation [CRD42023407218].

  18. Alam MK, Awawdeh M, Khanagar SB, Aboelmaaty W, Abutayyem H, Alswairki HJ, et al.
    Cancers (Basel), 2023 Nov 13;15(22).
    PMID: 38001647 DOI: 10.3390/cancers15225387
    BACKGROUND: There are several significant gaps in current studies of the relationship between anti-cancer medications and orthodontic care that call for more investigation. As a result, the main goals of this systematic review and meta-analysis were to summarise and assess the information that was available regarding the effect of radiotherapy and anti-cancer medications on the overall successful completion of an orthodontic treatment plan.

    METHODS: A standardised data extraction form was devised in accordance with the PRISMA guidelines to conduct a systematic review and meta-analysis, with specific criteria implemented for selecting studies with low to moderate risk of bias.

    RESULTS: Five studies involving different methodologies were selected at the conclusion of the search strategy. The statistical analysis revealed an estimated odds ratio (OR) of 0.31 and relative risk (RR) of 0.48, indicating a statistically significant association between the use of radiotherapy and anti-neoplastic drugs and a noticeable reduction in the successful completion of orthodontic treatment. The heterogeneity analysis showed significant heterogeneity among the studies.

    CONCLUSIONS: This review emphasises that, although orthodontic therapies can still be beneficial for children receiving chemotherapy, the effectiveness of the therapy may be diminished in older populations. The findings further highlight how crucial it is to take cancer therapies into account when planning and managing orthodontic treatment in order to optimise results and reduce problems.

  19. Maqsood A, Sadiq MSK, Mirza D, Ahmed N, Lal A, Alam MK, et al.
    Biomed Res Int, 2021;2021:5437237.
    PMID: 34845437 DOI: 10.1155/2021/5437237
    Objective: The present study was aimed at assessing the impact of teledentistry, its application, and trends in uplifting dental practice and clinical care around the world. Material and Methods. The present observational study comprised of an electronic survey distributed among dental professionals around the globe. The validated survey form consisted of a total 26 questions with 5-point Likert scale response. The questionnaire used was divided into four domains: usefulness of teledentistry for patients, its usefulness in dental practice, its capacity to improve the existing practice, and the concerns attached to its use. The statistical analysis was performed using SPSS-25. ANOVA test was used to assess the effect of independent variables on dependent variables. A p value of ≤0.05 was taken as statistically significant.

    Results: A total of 506 dental professionals participated in the study with the response rate of 89.39%. More than half of the participants (50-75%) endorsed that teledentistry is a useful tool for improving clinical practice as well as patient care. Two-thirds of the participants (69.96%) considered that teledentistry would reduce cost for the dental practices. On the other hand, about 50-70% of dental professionals expressed their concerns regarding the security of the data and consent of patients. The most preferred communication tool for teledentistry was reported to be videoconference followed by phone. The majority of participants recommended the use of teledentistry in the specialty of oral medicine, operative dentistry, and periodontics. There was a significant difference between the age, experience of dentists, and their qualifications with domains of teledentistry.

    Conclusions: The overall impact of dental professionals towards teledentistry was positive with adequate willingness to incorporate this modality in their clinical practice. However, the perceived concerns pertaining to teledentistry are significant impediments towards its integration within the oral health system. An in-depth study of its business model and cost-benefit needs of time, especially in the context of developing countries, in order to avail the optimum benefits of teledentistry.

  20. May Z, Alam MK, Husain K, Hasan MK
    PLoS One, 2020;15(8):e0238073.
    PMID: 32845901 DOI: 10.1371/journal.pone.0238073
    Transmission opportunity (TXOP) is a key factor to enable efficient channel bandwidth utilization over wireless campus networks (WCN) for interactive multimedia (IMM) applications. It facilitates in resource allocation for the similar categories of multiple packets transmission until the allocated time is expired. The static TXOP limits are defined for various categories of IMM traffics in the IEEE802.11e standard. Due to the variation of traffic load in WCN, the static TXOP limits are not sufficient enough to guarantee the quality of service (QoS) for IMM traffic flows. In order to address this issue, several existing works allocate the TXOP limits dynamically to ensure QoS for IMM traffics based on the current associated queue size and pre-setting threshold values. However, existing works do not take into account all the medium access control (MAC) overheads while estimating the current queue size which in turn is required for dynamic TXOP limits allocation. Hence, not considering MAC overhead appropriately results in inaccurate queue size estimation, thereby leading to inappropriate allocation of dynamic TXOP limits. In this article, an enhanced dynamic TXOP (EDTXOP) scheme is proposed that takes into account all the MAC overheads while estimating current queue size, thereby allocating appropriate dynamic TXOP limits within the pre-setting threshold values. In addition, the article presents an analytical estimation of the EDTXOP scheme to compute the dynamic TXOP limits for the current high priority traffic queues. Simulation results were carried out by varying traffic load in terms of packet size and packet arrival rate. The results show that the proposed EDTXOP scheme achieves the overall performance gains in the range of 4.41%-8.16%, 8.72%-11.15%, 14.43%-32% and 26.21%-50.85% for throughput, PDR, average ETE delay and average jitter, respectively when compared to the existing work. Hence, offering a better TXOP limit allocation solution than the rest.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links