Displaying publications 61 - 80 of 667 in total

Abstract:
Sort:
  1. Rahman AM, Jamayet NB, Nizami MMUI, Johari Y, Husein A, Alam MK
    J Prosthet Dent, 2021 Jan 17.
    PMID: 33472753 DOI: 10.1016/j.prosdent.2020.07.026
    STATEMENT OF PROBLEM: The climate of tropical Southeast Asia includes high humidity and ultraviolet radiation that reduce the lifespan of silicone prostheses by inducing changes in their mechanical properties and color stability. Studies on the surface roughness (SR) and mechanical properties of different silicone elastomers (SEs) subjected to the natural tropical weather of Southeast Asia are lacking.

    PURPOSE: The purpose of this in vitro study was to evaluate the SR, tensile strength (TS), and percentage elongation (% E) of different SEs subjected to outdoor weathering in the Malaysian climate.

    MATERIAL AND METHODS: Type-II dumbbell-shaped specimens (N-120) (nonweathered=15, weathered=15) were made from 3 room-temperature vulcanized (A-2000, A-2006, and A-103) and 1 heat-temperature vulcanized (M-511) silicone (Factor II). For 6 months, weathered specimens were subjected to outdoor weathering inside a custom exposure rack. Simultaneously, the nonweathered specimens were kept in a dehumidifier. Subsequently, the SR was measured with a profilometer; TS and % E were measured by using a universal testing machine. Two-way ANOVA was used to compare the means of the tested properties of the nonweathered and weathered specimens, and pairwise comparison was carried out between the silicones (α=.05).

    RESULTS: After outdoor weathering, the SR, TS, and % E were adversely affected by weathering in the Malaysian environment. Among the silicone materials, A-2000 showed the least TS changes (2.51 MPa), while A-2006 demonstrated significant changes in percentage elongation after outdoor weathering (266.5%). M-511 exhibited the highest mean value (2.50 μm) for SR changes. In addition, A-103 SE showed statistically significant differences in most pairwise comparisons for all 3 dependent variables.

    CONCLUSIONS: Based on the evaluation of mechanical properties, A-103 can be suggested as a suitable silicone for maxillofacial prostheses fabricated for tropical climates. However, A-2000 can be a suitable alternative, although significant changes to surface roughness were detected after outdoor weathering.

    Matched MeSH terms: Analysis of Variance
  2. Wan Nawawi WM, Jamal P, Alam MZ
    Bioresour Technol, 2010 Dec;101(23):9241-7.
    PMID: 20674345 DOI: 10.1016/j.biortech.2010.07.024
    This paper introduces sludge palm oil (SPO) as a novel substrate for biosurfactant production by liquid state fermentation. Potential strains of microorganism were isolated from various hydrocarbon-based sources at palm oil mill and screened for biosurfactant production with the help of drop collapse method and surface tension activity. Out of 22 isolates of microorganism, the strain S02 showed the highest bacterial growth with a surface tension of 36.2 mN/m and was therefore, selected as a potential biosurfactant producing microorganism. Plackett-Burman experimental design was employed to determine the important nutritional requirement for biosurfactant production by the selected strain under controlled conditions. Six out of 11 factors of the production medium were found to significantly affect the biosurfactant production. K(2)HPO(4) had a direct proportional correlation with the biosurfactant production while sucrose, glucose, FeSO(4), MgSO(4), and NaNO(3) showed inversely proportional relationship with biosurfactant production in the selected experimental range.
    Matched MeSH terms: Analysis of Variance
  3. Al-Makramani BMA, Razak AAA, Abu-Hassan MI, Al-Sanabani FA, Albakri FM
    Open Access Maced J Med Sci, 2018 Mar 15;6(3):548-553.
    PMID: 29610618 DOI: 10.3889/oamjms.2018.111
    BACKGROUND: The selection of the appropriate luting cement is a key factor for achieving a strong bond between prepared teeth and dental restorations.

    AIM: To evaluate the shear bond strength of Zinc phosphate cement Elite, glass ionomer cement Fuji I, resin-modified glass ionomer cement Fuji Plus and resin luting cement Panavia-F to Turkom-Cera all-ceramic material.

    MATERIALS AND METHODS: Turkom-Cera was used to form discs 10mm in diameter and 3 mm in thickness (n = 40). The ceramic discs were wet ground, air - particle abraded with 50 - μm aluminium oxide particles and randomly divided into four groups (n = 10). The luting cement was bonded to Turkom-Cera discs as per manufacturer instructions. The shear bond strengths were determined using the universal testing machine at a crosshead speed of 0.5 mm/min. The data were analysed using the tests One Way ANOVA, the nonparametric Kruskal - Wallis test and Mann - Whitney Post hoc test.

    RESULTS: The shear bond strength of the Elite, Fuji I, Fuji Plus and Panavia F groups were: 0.92 ± 0.42, 2.04 ± 0.78, 4.37 ± 1.18, and 16.42 ± 3.38 MPa, respectively. There was the statistically significant difference between the four luting cement tested (p < 0.05).

    CONCLUSION: the phosphate-containing resin cement Panavia-F exhibited shear bond strength value significantly higher than all materials tested.

    Matched MeSH terms: Analysis of Variance
  4. Tahir M, Upadhyay DK, Iqbal MZ, Rajan S, Iqbal MS, Albassam AA
    J Pharm Bioallied Sci, 2020 10 08;12(4):436-443.
    PMID: 33679090 DOI: 10.4103/jpbs.JPBS_263_20
    Introduction: Community pharmacist's knowledge about the uses of herbal medicines and its adverse drug reactions reporting can contribute in better therapeutic outcomes and patient safety. Objectives: To evaluate community pharmacists' knowledge about the use of herbal medicines and its adverse drug reactions reporting in Kedah state, Malaysia.

    Methods: A cross-sectional, questionnaire-based study was conducted among 103 pharmacists from 74 different community pharmacies to assess their knowledge about the use of herbal medicines and its adverse drug reaction reporting by using a pre-validate knowledge questionnaire consisting of 12 questions related to it. The pharmacists' responses were measured at a 3-point Likert scale (Poor=1, Moderate=2, and Good=3) and data was entered in SPSS version 22. The minimum and maximum possible scores for knowledge questionnaires were 12 and 36 respectively. Quantitative data was analyzed by using One Way ANOVA and Paired t-test whereas Chi-square and Fisher exact test were used for qualitative data analysis. A p-value of less than 0.05 was considered statistically significant for all the analyses.

    Results: About 92% of the pharmacist had good knowledge regarding the use of herbal medicines and its adverse drug reaction reporting with a mean knowledge score of 32.88±3.16. One-way ANOVA determined a significant difference of employment setting (p<0.043) and years of experience (<0.008) with mean knowledge scores of Pharmacists. Pharmacists' knowledge was significantly associated with their years of experience with the Chi-square test.

    Conclusion: Pharmacists exhibit good knowledge regarding the use of herbal medicines and its adverse drug reaction reporting. However, with an increasing trend of herbal medicine use and its adverse drug reaction reporting it recalls the empowerment of experienced pharmacists with training programs in this area for better clinical outcomes.

    Matched MeSH terms: Analysis of Variance
  5. Mohamed Abdulmunem, Hadijah Binti Abdullah, Noor Hayaty Binti Abu Kasim, Ali Dabbagh
    Sains Malaysiana, 2015;44:1189-1194.
    The aim of this study was to investigate the simultaneous influence of various dental posts and cementation materials on the fracture resistance and failure mode of the endodontically-treated teeth. Sixty endodontically treated upper central incisors were randomly divided into two main groups, each consisted of three subgroups restored with titanium, fiber and stainless steel posts. The posts in the first and second groups were luted with zinc phosphate and composite resin cements, respectively. Composite cores were built-up over the specimens and then retained with nickel-chromium crowns. Specimens were thermocycled and then loaded at 135o until failures were observed. The obtained data of fracture resistances and failure modes were analyzed using Two-way ANOVA and the Chi-Square tests, respectively. The results showed that the zinc phosphate cement resulted in relatively higher fracture resistances. However, luting of dental posts with composite resin provided more restorable failures in endodontically-treated teeth. Moreover, the teeth restored by fiber posts exhibited desirable fracture resistances with more restorable failure modes, compared with those restored by titanium or stainless steel posts.
    Matched MeSH terms: Analysis of Variance
  6. Islam A, Sundaraj K, Ahmad RB, Sundaraj S, Ahamed NU, Ali MA
    Muscle Nerve, 2015 Jun;51(6):899-906.
    PMID: 25204740 DOI: 10.1002/mus.24454
    In this study, we analyzed the crosstalk in mechanomyographic (MMG) signals generated by the extensor digitorum (ED), extensor carpi ulnaris (ECU), and flexor carpi ulnaris (FCU) muscles of the forearm during wrist flexion (WF) and extension (WE) and radial (RD) and ulnar (UD) deviations.
    Matched MeSH terms: Analysis of Variance
  7. Karim MZ, Chowdhury ZZ, Hamid SBA, Ali ME
    Materials (Basel), 2014 Oct 13;7(10):6982-6999.
    PMID: 28788226 DOI: 10.3390/ma7106982
    Hydrolyzing the amorphous region while keeping the crystalline region unaltered is the key technology for producing nanocellulose. This study investigated if the dissolution properties of the amorphous region of microcrystalline cellulose can be enhanced in the presence of Fe(3+) salt in acidic medium. The process parameters, including temperature, time and the concentration of metal chloride catalyst (FeCl₃), were optimized by using the response surface methodology (RSM). The experimental observation demonstrated that temperature and time play vital roles in hydrolyzing the amorphous sections of cellulose. This would yield hydrocellulose with higher crystallinity. The factors that were varied for the production of hydrocellulose were the temperature (x₁), time (x₂) and FeCl₃ catalyst concentration (x₃). Responses were measured in terms of percentage of crystallinity (y₁) and the yield (y₂) of the prepared hydrocellulose. Relevant mathematical models were developed. Analysis of variance (ANOVA) was carried out to obtain the most significant factors influencing the responses of the percentage of crystallinity and yield. Under optimum conditions, the percentage of crystallinity and yield were 83.46% and 86.98% respectively, at 90.95 °C, 6 h, with a catalyst concentration of 1 M. The physiochemical characteristics of the prepared hydrocellulose were determined in terms of XRD, SEM, TGA and FTIR analyses. The addition of FeCl₃ salt in acid hydrolyzing medium is a novel technique for substantially increasing crystallinity with a significant morphological change.
    Matched MeSH terms: Analysis of Variance
  8. Mat-Shayuti MS, Tuan Ya TMYS, Abdullah MZ, Othman NH, Alias NH
    Environ Sci Pollut Res Int, 2021 Nov;28(41):58081-58091.
    PMID: 34106401 DOI: 10.1007/s11356-021-14776-8
    Despite the potential shown by previous investigations on the use of ultrasound for the remediation of oil-contaminated sand, the influence and interactions among ultrasonic parameters and oily sand are unclear, leading to possible ineffective treatment and high-power consumption. In order to improve the process efficiency, this work analyzes the effects of ultrasonic power, frequency, and load toward the cleaning of crude oil-contaminated sand, using two different sample positions and sand types. Crude oil-contaminated beach sand and produced sand from offshore oil well were used as samples. They were cleaned in custom-made ultrasonic bath reactor for 10 min with power from 30 to 120 W, frequency covering 25-60 kHz, and sand load of 10-100 g. With experimental design consisting multiple factors and levels, the interactions between factors in all possible combinations were determined using ANOVA (n = 210). From p-value based at 95% confidence interval and extensive F test, the three most significant factors were the sand type, the ultrasonic frequency, and the interaction between sand type and frequency. The best setting for suspended samples involved high frequency of 60 kHz, whereas bottom samples preferred low frequency at 28 kHz. This finding was justified when the acoustic pressure attenuation, standing wave pattern, and surface pitting/cracking were found in correlation with the cleaning results. Overall, the maximum treatment under ultrasonic bath solely gained around 60%, improvable by hybrid cleaning with other techniques such as chemical, biological, mechanical, and thermal.
    Matched MeSH terms: Analysis of Variance
  9. Ibrahim MI, Abdullah M, Naing L, Abdullah JM, Idris Z, Aljunid SM
    Asian J Surg, 2007 Oct;30(4):261-6.
    PMID: 17962129
    The aim of this study was to determine the cost-effectiveness of using baseline neuromonitoring (BNM) compared with multimodality monitoring (M3) for severe traumatic brain injury (TBI).
    Matched MeSH terms: Analysis of Variance
  10. Esa R, Razak IA, Allister JH
    Community Dent Health, 2001 Mar;18(1):31-6.
    PMID: 11421403
    Data on malocclusion and orthodontic treatment need in Malaysia are limited. The purpose of this study was to evaluate malocclusion and orthodontic treatment need in a sample of 12-13-year-old schoolchildren using the Dental Aesthetic Index (DAI), and to assess the relationship between malocclusion and socio-demographic variables, perceptions of need for orthodontic treatment, aesthetic perception and social functioning.
    Matched MeSH terms: Analysis of Variance
  11. Razak AA, Abu-Hassan MI, Al-Makramani BM, Al-Sanabani FA, Al-Shami IZ, Almansour HM
    J Contemp Dent Pract, 2016 Nov 01;17(11):920-925.
    PMID: 27965501
    AIM: The aim of this study was to evaluate the effect of surface treatments on shear bond strength (SBS) of Turkom-Cera (Turkom-Ceramic (M) Sdn. Bhd., Puchong, Malaysia) all-ceramic material cemented with resin cement Panavia-F (Kuraray Medical Inc., Okayama, Japan).

    MATERIALS AND METHODS: Forty Turkom-Cera ceramic disks (10 mm × 3 mm) were prepared and randomly divided into four groups. The disks were wet ground to 1000-grit and subjected to four surface treatments: (1) No treatment (Control), (2) sandblasting, (3) silane application, and (4) sandblasting + silane. The four groups of 10 specimens each were bonded with Panavia-F resin cement according to manufacturer's recommendations. The SBS was determined using the universal testing machine (Instron) at 0.5 mm/min crosshead speed. Failure modes were recorded and a qualitative micromorphologic examination of different surface treatments was performed. The data were analyzed using the one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests.

    RESULTS: The SBS of the control, sandblasting, silane, and sandblasting + silane groups were: 10.8 ± 1.5, 16.4 ± 3.4, 16.2 ± 2.5, and 19.1 ± 2.4 MPa respectively. According to the Tukey HSD test, only the mean SBS of the control group was significantly different from the other three groups. There was no significant difference between sandblasting, silane, and sandblasting + silane groups.

    CONCLUSION: In this study, the three surface treatments used improved the bond strength of resin cement to Turkom-Cera disks.

    CLINICAL SIGNIFICANCE: The surface treatments used in this study appeared to be suitable methods for the cementation of glass infiltrated all-ceramic restorations.

    Matched MeSH terms: Analysis of Variance
  12. Jin H, Earnshaw VA, Wickersham JA, Kamarulzaman A, Desai MM, John J, et al.
    AIDS Care, 2014;26(10):1223-8.
    PMID: 24625279 DOI: 10.1080/09540121.2014.894616
    Stigma perpetuated by health-care providers has been found to be a barrier to care for vulnerable populations, including HIV-infected, people who inject drugs (PWIDs), and men who have sex with men (MSM) in multiple clinical contexts and remains unexamined among professional health-care students in Malaysia. This cross-sectional, anonymous, and Internet-based survey assessed the attitudes of medical and dental students toward HIV-infected, PWID, and MSM patients. Survey invitation was emailed to 3191 students at 8 professional schools; 1296 (40.6%) responded and scored their attitudes toward these patient groups using a feeling thermometer, indicating their attitudes on a sliding scale from 0 (most negative) to 100 (most positive). Compared to general patients (mean = 76.50), the mean scores for HIV-infected (mean = 54.04; p < 0.001), PWID (mean = 37.50; p < 0.001), and MSM (mean = 32.13; p < 0.001) patients were significantly lower and significantly different between each group comparison. Within group differences, most notably religion, ethnicity, and personally knowing someone from these populations were associated with significant differences in attitudes. No differences were noted between pre-clinical and clinical year of training. Health-care students represent the next generation of clinicians who will be responsible for future HIV prevention and treatment efforts. Our findings suggest alarmingly negative attitudes toward these patients, especially MSM, necessitating prompt and effective interventions designed to ameliorate the negative attitudes of health-care students toward vulnerable populations, specifically HIV-infected, PWID, and MSM patients in Malaysia.
    Site site: online surveys at seven universities: University of Malaya, National University of Malaysia, International Islamic University Malaysia, Universiti Malaysia Sarawak, Penang International Dental College, Universiti Teknologi MARA Malaysia, and Universiti Sains Malaysia.
    Matched MeSH terms: Analysis of Variance
  13. Ahmed SW, Hussain G, Altaf K, Ali S, Alkahtani M, Abidi MH, et al.
    Polymers (Basel), 2020 Sep 22;12(9).
    PMID: 32971747 DOI: 10.3390/polym12092155
    The scope of additive manufacturing, particularly fused deposition modelling (FDM), can indeed be explored with the fabrication of multi-material composite laminates using this technology. Laminar composite structures made up of two distinct materials, namely acrylonitrile butadiene styrene (ABS) and carbon fiber reinforced polylactic acid (CF-PLA), were produced using the FDM process. The current study analyzes the effect of various printing parameters on the interfacial bond strength (IFBS) of the ABS/CF-PLA laminar composite by employing response surface methodology. The physical examination of the tested specimens revealed two failure modes, where failure mode 1 possessed high IFBS owing to the phenomenon of material patch transfer. Contrarily, failure mode 2 yielded low IFBS, while no patch transfer was observed. The analysis of variance (ANOVA) revealed that printing parameters were highly interactive in nature. After extensive experimentation, it was revealed that good quality of IFBS is attributed to the medium range of printing speed, high infill density, and low layer height. At the same time, a maximum IFBS of 20.5 MPa was achieved. The study presented an empirical relation between printing parameters and IFBS that can help in forecasting IFBS at any given printing parameters. Finally, the optimized printing conditions were also determined with the aim to maximize IFBS.
    Matched MeSH terms: Analysis of Variance
  14. Qamaruddin I, Alam MK, Shahid F, Tanveer S, Umer M, Amin E
    Saudi Dent J, 2018 Jan;30(1):43-46.
    PMID: 30166870 DOI: 10.1016/j.sdentj.2017.10.002
    Background: The analysis of skeletal relationships of jaws in the sagittal plane is of utmost importance in orthodontic diagnosis for which numerous lateral cephalometric analyses have emerged. None of the analyses is without flaws. Current study compares ANB, Wits appraisal, Beta angle, Yen angle and W angle for their validity and reliability in diagnosis of skeletal classes.

    Methods: Pretreatment cephalograph of 209 orthodontic patients comprised of 92 males and 117 females were selected from orthodontic archives. Radiographs were traced for ANB, Wits appraisal, Beta angle, W angle and Yen angle measurements. Patients were divided into three skeletal classes i.e. class I, II and III based on measurements and incisor classification and profile recorded from their files. ANOVA was applied to check the validity of performed analyses and Cramer's correlation was performed to find out the correlation between analyses and skeletal classes.

    Results: All performed analyses showed statistically significant difference in the values for all three skeletal classes p 

    Matched MeSH terms: Analysis of Variance
  15. Sidik DA, Ngadi N, Amin NA
    Bioresour Technol, 2013 May;135:690-6.
    PMID: 23186683 DOI: 10.1016/j.biortech.2012.09.041
    The production of lignin from empty fruit bunch (EFB) has been carried out using liquefaction method with 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) ionic liquid (IL), in presence of sulfuric acid (H2SO4) as a catalyst. Response surface methodology (RSM) based on a factorial Central Composite Design (CCD) was employed to identify the optimum condition for lignin yield. The result indicated that the second order model was adequate for all the independent variables on the response with R(2)=0.8609. The optimum temperature, time, ionic liquid to EFB ratio, and catalyst concentration were 150.5 °C, 151 min, 3:1 wt/wt and 4.73 wt%, respectively for lignin yield=26.6%. The presence of lignin liquefied product was confirmed by UV-Vis and FTIR analysis. It was also demonstrated lignin extraction from lignocellulosic using recycled IL gave sufficient performance.
    Matched MeSH terms: Analysis of Variance
  16. Mohamad Ansor N, Abdullah N, Aminudin N
    PMID: 24093919 DOI: 10.1186/1472-6882-13-256
    Ganoderma lucidum has been purported as a potent remedy in the treatment and prevention of several ailments, including hypertension. This study aimed to explore the anti-ACE potential of protein fractions from the mycelia of G. lucidum.
    Matched MeSH terms: Analysis of Variance
  17. Abubakar U, Muhammad HT, Sulaiman SAS, Ramatillah DL, Amir O
    Curr Pharm Teach Learn, 2020 03;12(3):265-273.
    PMID: 32273061 DOI: 10.1016/j.cptl.2019.12.002
    BACKGROUND AND PURPOSE: Training pharmacy students in infectious diseases (ID) is important to enable them to participate in antibiotic stewardship programs. This study evaluated knowledge and self-confidence regarding antibiotic resistance, appropriate antibiotic therapy, and antibiotic stewardship among final year pharmacy undergraduate students.

    METHODS: A cross-sectional electronic survey was conducted at universities in Indonesia, Malaysia, and Pakistan. A 59-item survey was administered between October 2017 and December 2017.

    FINDINGS: The survey was completed by 211 students (response rate 77.8%). The mean knowledge score for antibiotic resistance, appropriate antibiotic therapy, and antibiotic stewardship was 5.6 ± 1.5, 4.7 ± 1.8 (maximum scores 10.0) and 3.1 ± 1.4 (maximum score 5.0), respectively. Significant variations were noted among the schools. There was poor awareness about the consequences of antibiotic resistance and cases with no need for an antibiotic. The knowledge of antibiotic resistance was higher among male respondents (6.1 vs. 5.4) and those who had attended antibiotic resistance (5.7 vs. 5.2) and antibiotic therapy (5.8 vs. 4.9) courses (p 

    Matched MeSH terms: Analysis of Variance
  18. Jami MS, Rosli NS, Amosa MK
    Water Environ Res, 2016 Jun;88(6):566-76.
    PMID: 26556067 DOI: 10.2175/106143015X14362865227157
    Availability of quality-certified water is pertinent to the production of food and pharmaceutical products. Adverse effects of manganese content of water on the corrosion of vessels and reactors necessitate that process water is scrutinized for allowable concentration levels before being applied in the production processes. In this research, optimization of the adsorption process conditions germane to the removal of manganese from biotreated palm oil mill effluent (BPOME) using zeolite 3A subsequent to a comparative adsorption with clinoptilolite was studied. A face-centered central composite design (FCCCD) of the response surface methodology (RSM) was adopted for the study. Analysis of variance (ANOVA) for response surface quadratic model revealed that the model was significant with dosage and agitation speed connoting the main significant process factors for the optimization. R(2) of 0.9478 yielded by the model was in agreement with predicted R(2). Langmuir and pseudo-second-order suggest the adsorption mechanism involved monolayer adsorption and cation exchanging.
    Matched MeSH terms: Analysis of Variance
  19. Jaber AA, Khan AH, Syed Sulaiman SA, Ahmad N, Anaam MS
    PLoS One, 2016;11(6):e0156258.
    PMID: 27257990 DOI: 10.1371/journal.pone.0156258
    BACKGROUND: The health-related quality of life (HRQoL) of Tuberculosis (TB) patients is important because it directly influences the outcome of TB patients in several aspects. The current study aims to evaluate and to find the factors influencing the HRQoL of TB patients in two major TB-prevalent cities (Taiz and Alhodidah) in Yemen.

    METHODS: A prospective study was conducted, and all TB patients meeting the HRQoL criteria were asked to complete the HRQoL SF-36 survey. The records of TB patients were examined for disease confirmation, and a follow-up was consequently performed for patients during treatment between March 2013 and February 2014 in Taiz and Alhodidah Cities. HRQol scores were calculated by using QM scoring software version 4.5, in which the physical component score (PCS) and mental component score (MCS) were obtained. The scores obtained between 47-53 normal based score (NBS) were considered equivalent to the US normal score. Low scores indicate the poor health situation of TB patients.

    RESULTS: A total of 243 TB patients enrolled in the study at the beginning of the treatment. A total of 235 and 197 TB patients completed the questionnaire at the end of the intensive phase (I.P.) and continuation phase (C.P.), respectively. The final dropout rate was 16.2%. The mean PCS and MCS scores at the beginning of treatment were low, thus showing the poor health situation of TB patients. The mean PCS scores at the beginning of treatment, end of I.P., and end of treatment were (36.1), (44.9), and (48), respectively. Moreover, the mean MCS score at the beginning of treatment, end of I.P., and end of treatment were (35.1), (42.2), and (44.3), respectively. The result shows that significant increases are observed at the end of I.P. for PCS and MCS because of the treatment and slight changes at the end of C.P. Despite this finding, the MCS score remains below the normal range (47), thus indicating a significant risk of depression among TB patients. Furthermore, general linear repeated measure ANOVA was performed for selected variables, to examine the changes of PCS and MCS over time. It was found that Alhodiah city, chewing khat habit, stigmatization, and duration of treatment more than six months were greatly associated with low mean MCS score of TB patient, indicating great risk of depression which may result in poor treatment outcome.

    CONCLUSION: TB patients in Yemen were found to have poor QoL, with a significant likelihood of depression. Highly risk depression was found among TB patients in Alhodiah city, khat chewers, stigmatization and having a duration of treatment more than 6 months. Therefore, additional efforts should be made to improve their QoL because it may affect the final clinical outcome of patients.

    Matched MeSH terms: Analysis of Variance
  20. Norhayati MN, Nik Hazlina NH, Aniza AA
    BMC Public Health, 2016 08 18;16(1):818.
    PMID: 27538506 DOI: 10.1186/s12889-016-3524-9
    BACKGROUND: Given the growing interest in severe maternal morbidity (SMM), the need to assess its effects on quality of life is pressing. The objective of this study was to compare the quality of life scores between women with and without SMM at 1-month and 6-month postpartum in Kelantan, Malaysia.

    METHODS: A prospective double cohort study design was applied at two tertiary referral hospitals over a 6-month period. The study population included all postpartum women who delivered in 2014. Postpartum women with and without SMM were selected as the exposed and non-exposed groups, respectively. For each exposed case identified, a non-exposed case with a similar mode of delivery was selected. The main outcome measures used were scores from the Short Form-12 Health Survey (SF-12).

    RESULTS: The study measured 145 exposed and 187 non-exposed women. The group-time interaction of the repeated measure analysis of variance (RM ANOVA) showed no significant difference in the mean overall SF-12 physical component summary score changes (P = 0.534) between women with and without SMM. Similarly, the group-time interaction of the RM ANOVA showed no significant difference in the mean overall SF-12 mental component summary score changes (P = 0.674) between women with and without SMM. However, women with SMM scored significantly lower on a general health perceptions subscale at 1-month (P = 0.031), role limitations due to physical health subscale at 6-month (P = 0.019), vitality subscale at 1-month (P = 0.007) and 6-month (P = 0.008), and role limitations due to emotional problems subscales at 6-month (P = 0.008).

    CONCLUSIONS: Women with severe maternal morbidity demonstrated comparable quality of life during the 6-month postpartum period compared to women without severe maternal morbidity.

    Matched MeSH terms: Analysis of Variance
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links