This study intends to determine the health impacts from two office life cycles (St.1 and St.2) using life cycle assessment (LCA) and health risk assessment of indoor metals in coarse particulates (particulate matter with diameters of less than 10µm). The first building (St.1) is located in the city centre and the second building (St.2) is located within a new development 7km away from the city centre. All life cycle stages are considered and was analysed using SimaPro software. The trace metal concentrations were determined by inductively couple plasma-mass spectrometry (ICP-MS). Particle deposition in the human lung was estimated using the multiple-path particle dosimetry model (MPPD). The results showed that the total human health impact for St.1 (0.027 DALY m-2) was higher than St.2 (0.005 DALY m-2) for a 50-year lifespan, with the highest contribution from the operational phase. The potential health risk to indoor workers was quantified as a hazard quotient (HQ) for non-carcinogenic elements, where the total values for ingestion contact were 4.38E-08 (St.1) and 2.59E-08 (St.2) while for dermal contact the values were 5.12E-09 (St.1) and 2.58E-09 (St.2). For the carcinogenic risk, the values for dermal and ingestion routes for both St.1 and St.2 were lower than the acceptable limit which indicated no carcinogenic risk. Particle deposition for coarse particles in indoor workers was concentrated in the head, followed by the pulmonary region and tracheobronchial tract deposition. The results from this study showed that human health can be significantly affected by all the processes in office building life cycle, thus the minimisation of energy consumption and pollutant exposures are crucially required.
This study aims to determine the status of potentially toxic element concentrations of road dust in a medium-sized city (Rawang, Malaysia). This study adopts source identification via enrichment factor, Pearson correlation analysis, and Fourier spectral analysis to identify sources of potentially toxic element concentrations in road dust in Rawang City, Malaysia. Health risk assessment was conducted to determine potential health risks (carcinogenic and non-carcinogenic risks) among adults and children via multiple pathways (i.e., ingestion, dermal contact, and inhalation). Mean of potentially toxic element concentrations were found in the order of Pb > Zn > Cr(IV) > Cu > Ni > Cd > As > Co. Source identification revealed that Cu, Cd, Pb, Zn, Ni, and Cr(IV) are associated with anthropogenic sources in industrial and highly populated areas in northern and southern Rawang, cement factories in southern Rawang, as well as the rapid development and population growth in northwestern Rawang, which have resulted in high traffic congestion. Cobalt, Fe, and As are related to geological background and lithologies in Rawang. Pathway orders for both carcinogenic and non-carcinogenic risks are ingestion, dermal contact, and inhalation, involving adults and children. Non-carcinogenic health risks in adults were attributed to Cr(IV), Pb, and Cd, whereas Cu, Cd, Cr(IV), Pb, and Zn were found to have non-carcinogenic health risks for children. Cd, Cr(IV), Pb, and As may induce carcinogenic risks in adults and children, and the total lifetime cancer risk values exceeded incremental lifetime.
This study aims to determine the concentrations of surfactants in the surface microlayer (SML), subsurface water (SSW) and fine mode aerosol (diameter size dust (23%) and sulphate/fresh sea salt (8%). During the southwest monsoon, the three main sources of atmospheric aerosol were biomass burning (71%), secondary inorganic aerosol (23%) and sea spray (6%). This study suggests anthropogenic sources are main contributors to the concentrations of surfactants in SML, SSW and fine aerosols.
This study was conducted to determine the composition of surfactants in atmospheric aerosols and rainwater in the vicinity of Lake Chini, Malaysia. Samples of atmospheric aerosol and rainwater were collected between March and September 2011 using a high volume air sampler (HVAS) and glass bottles equipped with funnel. Colorimetric analysis was undertaken to determine the concentration of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as disulphine blue active substances (DBAS). The water-soluble ionic compositions were determined using inductively coupled plasma mass spectrometry for cations (Na, K, Mg and Ca) and ion chromatography equipped with a conductivity detector for anions (F(-), Cl(-), NO3(-), and SO4(2-)) and the Nessler Method was used to obtain the NH4(+) concentrations. The source apportionment of MBAS and DBAS in atmospheric aerosols was identified using a combination of principal component analysis (PCA) and multiple linear regression (MLR). The results revealed that the concentrations of surfactants in atmospheric aerosols and rainwater were dominated by anionic surfactants as MBAS. The concentration of surfactants as MBAS and DBAS was dominated in fine mode compared to coarse mode aerosols. Using PCA/MLR analysis, two major sources of atmospheric surfactants to Lake Chini were identified as soil dust (75 to 93%) and biomass burning (2 to 22%).
Fluxes and composition dynamics of atmospheric nitrogen deposition play key roles in better balancing economic development and ecological environment. However, there are some knowledge gaps and difficulties in urban ecosystems, especially for small and medium-sized cities. In this study, both flux and composition (ratio of NH4+-N to NO3--N, RN) of wet-deposited dissolved inorganic nitrogen (DIN, sum of NO3--N and NH4+-N) were estimated and sources were identified at a long-term urban observation station in Tongling, a typical medium-sized city in eastern China during 2010-2016, respectively. Results showed that wet-deposited DIN fluxes were 33.20 and 28.15 kgN ha-1 yr-1 in Tongling city during 2010-2011 and 2015-2016, respectively. Compared to these two periods, both DIN and NO3--N fluxes decreased by 15.2% and 31.8% for a series of NOx abatement measures applied effectively, respectively. At the same time, the NH4+-N flux remained stable and ranged from 19.53 to 20.62 kgN ha-1 yr-1, and the RN increased from 1.7 to 2.2. Seasonally, winds from the southwest and west-southwest with higher frequencies and speeds in spring and summer brought more NH4+-N and DIN wet deposition from an ammonia plant, which could threaten the safety of regional hydrosphere ecosystems. On the whole, the wet-deposited NH4+-N was threatening regional ecosystems of both the hydrosphere and forest. The wet-deposited DIN including NH4+-N in Tongling city stemmed mainly from a combined source of coal combustion and dust from Cu extraction and smelting, ammonia production, and roads. Therefore, production lines should be updated for Cu extraction and smelting industries, thermal power generations and the ammonia plant, old vehicles should be eliminated, and the use of new energy vehicles should be promoted for regional sustainable development and human health in the medium-sized city.
The household activities such as vacuuming may elevate the concentration of particulate matter in indoor environments. Cleaning workers and occupants inside closed room may be exposed to the fine particulate matter and at risk of developing numerous respiratory symptoms. This study aims to determine the concentration of the particulate matter (PM10 and PM2.5) that might arise during vacuuming activities and estimated the surface compartmental residence time of particulate matter in indoor environment after each vacuuming activities. The PM10 and PM2.5 concentrations throughout vacuuming were measured in forty-seven offices in Universiti Malaysia Terengganu using the TSI Dust Track DRX. Based on the concentrations measured, the surface compartmental residence time was then estimated using standardized equations taken from literature. The result shows that highest particulate matter concentration was nearly eleven times higher than the World Health Organization guidelines of 25 µg/m3 for PM2.5 concentration (PM2.5 was 270 µg/m3, PM10 was 421 µg/m3), while the particulate matter were estimated to remain lingers inside the air for around 1-4 days before being deposited on the surface. In conclusion, the usage of vacuum cleaners may contribute to more particulate matter being released inside the air due to the resuspension phenomenon. Therefore, it is important for the occupants to maintain proper ventilation after each vacuuming activities took place.
The concentrations of airborne particulate matter (PM) is often measured as a mass concentration. However, the other way to express particulate matter is by using the Particle Number Count ([PNC]) concentrations. This study aims to analyse the seasonal variation of airborne particulate matter in terms of [PNC] by using R packages and the Boosted Regression Trees (BRTs) technique. The study was conducted at IOES, Universiti of Malaya in Bachok, Kelantan. The monitoring was important to understand the variability of seasonal effects due to different seasons. In this work, only the datasets for three seasons (Inter Monsoon, North East Monsoon and South-West Monsoon) were analysed involving 25,958 data. The air quality monitoring equipment involved was the particle counter Environment Dust Monitor GRIMM Model 180 and a weather station for recording the meteorological parameters. The data analysis was completed by using R software and its package for evaluating seasonal variability and providing the statistical analysis. The relationship between variables was studied by using the Boosted Regression Tree (BRT) technique. The interaction between independent variables towards the [PNC] in different seasons was discussed. The best setting result of BRT model evaluation R² is 0.22 (North-East Monsoon), 0.87 (Intern monsoon 1), and 0.59 for South West Monsoon which indicated that the model developed is acceptable except for NEM and intern monsoon seasons. Temperature (57 %) and wind direction (67%) were found to be the highest factor influenced by the formation of [PNC] concentrations in this area. Finally, good results indicated that BRT technique is an acceptable way to analysed air pollution data.
This study attempted to investigate the effect of kiln drying on the rate of formation of ball copra. Three samples containing fifty partially dried-coconuts were placed as a single layer in three compartmentalized blocks namely, Front: Blok-1, Middle: Block-2, and Rear: Block-3 in the copra bed of the modified-Ceylon copra kiln. From each of the three blocks, thirty coconuts were selected randomly for labeling and their fresh weights were recorded. The samples were subjected to intermittent drying in the kiln by thirty five firing cycles using charcoal dust as the fuel source. The temperature distribution pattern of the three blocks during the first six firing was monitored at three hourly intervals. The weight losses of individual coconuts in each block were measured after the completion of each firing. The results showed that, there was a significant (p
The growing concern over the workers safety and health has lead many factories and organizations do the air monitoring to ensure the airborne at their workplace is safe for the worker’s health and complying the Occupational Safety and Health Act 1994 (Act 514). In this study, the monitoring covers an indoor air quality and chemical exposure to the workers in one of the power plant repair shop. A few workers from different sections namely blasting, welding, grinding, fitting and maintenance area were chosen to assist in the personal monitoring for 8 hours measurement. PM10 were measured at a few sampling points to collect dusts for 24 hours duration. The samples were brought back to the laboratory for gravimetric and SEM-EDAX analysis. The results were certainly exceed the limit for air quality, and many elements were detected such as Fe, Ni, Al, Si, Ca, K, Ba, S, Cr, Zn and Cl. The present of these elements shows that exposure to these particulate matters is quite risky and some measure needs to be taken for remedial action.
In the perspective of recent bauxite mining in Malaysia, this review aims to identify the potential
environmental and health impacts on miners and surrounding communities. The environmental issues of
bauxite mining include, air, water and soil pollution due to bauxite dust; leaching of bauxite into water
sources resulting in reduced soil fertility as well as affecting agricultural food products and aquatic life.
Bauxite occupational exposure affects the health of miners, and has negative consequences on the health of
surrounding communities, such as increased respiratory symptoms, contamination of drinking water, other
potential health risks from ingestion of bauxite and heavy metals, including noise-induced hearing loss and
mental stress. This review discusses the processes of bauxite mining, its constituents and residual trace
elements, and their impact on the environment and health of exposed workers and communities. It also
explores the Malaysian legal requirements and standards of occupational exposure to bauxite.
Air pollution can be detected through rainwater composition. In this study, long-term measurements (2000-2014) of wet deposition were made to evaluate the physicochemical interaction and the potential sources of pollution due to changes of land use. The rainwater samples were obtained from an urban site in Kuala Lumpur and a highland-rural site in the middle of Peninsular Malaysia. The compositions of rainwater were obtained from the Malaysian Meteorological Department. The results showed that the urban site experienced more acidity in rainwater (avg=277mm, range of 13.8 to 841mm; pH=4.37) than the rural background site (avg=245mm, range of 2.90 to 598mm; pH=4.97) due to higher anthropogenic input of acid precursors. The enrichment factor (EF) analysis showed that at both sites, SO42-, Ca2+ and K+ were less sensitive to seawater but were greatly influenced by soil dust. NH4+ and Ca2+ can neutralise a larger fraction of the available acid ions in the rainwater at the urban and rural background sites. However, acidifying potential was dominant at urban site compared to rural site. Source-receptor relationship via positive matrix factorisation (PMF 5.0) revealed four similar major sources at both sites with a large variation of the contribution proportions. For urban, the major sources influence on the rainwater chemistry were in the order of secondary nitrates and sulfates>ammonium-rich/agricultural farming>soil components>marine sea salt and biomass burning, while at the background site the order was secondary nitrates and sulfates>marine sea salt and biomass burning=soil components>ammonia-rich/agricultural farming. The long-term trend showed that anthropogenic activities and land use changes have greatly altered the rainwater compositions in the urban environment while the seasonality strongly affected the contribution of sources in the background environment.
The aim of the measurement of this data is to evaluate the Indoor Air Quality (IAQ) in terms of chemical and physical parameters. Data were collected at three different kindergartens having different surrounding activities (industrial, institutional, residential area). The chemical parameters measured were respirable suspended particulates of PM10, PM2.5, PM1, carbon monoxide and carbon dioxide, and the concentrations are within the acceptable limit. Physical parameters of wind speed are within the standard, while temperature and relative humidity exceeded the acceptable limit. A strong correlation was found between the chemical IAQ parameters with thermal comfort parameters (temperature and relative humidity). The concentration of IAQ pollutants is higher in order of residential > institutional > industrial.
The present study proposes a system for co-composting food waste and poultry manure amended with rice husk biochar at different doses (0, 3, 5, 10%, w/w), saw dust, and salts. The effect of rice husk biochar on the characteristics of final compost was evaluated through stabilization indices such as electrical conductivity, bulk density, total porosity, gaseous emissions and nitrogen conservation. Results indicated that when compared to control, the biochar amendment extended the thermophilic stage of the composting, accelerated the biodegradation and mineralization of substrate mixture and helped in the maturation of the end product. Carbon dioxide, methane and ammonia emissions were reduced and the nitrogen conservation was achieved at a greater level in the 10% (w/w) biochar amended treatments. This study implies that the biochar and salts addition for co-composting food waste and poultry manure is beneficial to enhance the property of the compost.
Abundance of fine particulate-bound 16 priority polycyclic aromatic hydrocarbons (PAHs) was investigated to ascertain its sources and potential carcinogenic health risks in Varanasi, India. The city represents a typical urban settlement of South Asia having particulate exposure manyfold higher than standard with reports of pollution induced mortalities and morbidities. Fine particulates (PM2.5) were monitored from October 2019 to May 2020, with 32% of monitoring days accounting ≥100 μgm-3 of PM2.5 concentration, frequently from November to January (99% of monitoring days). The concentration of 16 priority PAHs varied from 24.1 to 44.6 ngm-3 (mean: 33.1 ± 3.2 ngm-3) without much seasonal deviations. Both low (LMW, 56%) and high molecular weight (HMW, 44%) PAHs were abundant, with Fluoranthene (3.9 ± 0.4ngm-3) and Fluorene (3.5 ± 0.3ngm-3) emerged as most dominating PAHs. Concentration of Benzo(a)pyrene (B(a)P, 0.5 ± 0.1ngm-3) was lower than the national standard as it contributed 13% of total PAHs mass. Diagnostic ratios of PAH isomers indicate predominance of pyrogenic sources including emissions from biomass burning, and both from diesel and petrol-driven vehicles. Source apportionment using receptor model revealed similar observation of major PAHs contribution from biomass burning and fuel combustion (54% of source contribution) followed by coal combustion for residential heating and cooking purposes (44%). Potential toxicity of B[a]P equivalence ranged from 0.003 to 1.365 with cumulative toxicity of 2.13ngm-3. Among the PAH species, dibenzo[h]anthracene contributed maximum toxicity followed by B[a]P, together accounting 86% of PAH induced carcinogenicity. Incremental risk of developing cancer through lifetime exposure (ILCR) of PAHs was higher in children (3.3 × 10-4) with 56% contribution from LMW PAHs, primarily through ingestion and dermal contact. Adults in contrast, were more exposed to inhale airborne PAHs with cumulative ILCR of 2.2 × 10-4. However, ILCR to PM2.5 exposure is probably underestimated considering unaccounted metal abundance thus, require source-specific control measures.
The purpose of this study is to determine the concentration of the selected elemental composition in a multi-storey hostel. Dust samples were taken from three random rooms at each level of the student hostel by sweeping the floor. The concentrations of elements (Cd, Cu, Fe, Pb and Zn) were determined by using Inductively Coupled Plasma-Optical Emission Spectrometer (ICPOES) after digestion with nitric acid and sulfuric acid solutions. Dust samples analysis has shown the different levels of sampling point does not affect the concentration of the elements. The concentration of elements in investigated microenvironment was in the order of Fe > Zn > Cu > Pb > Cd. The correlation analysis was applied to elements variable in order to identify the sources of an airborne contaminant. It was discovered the strong positive correlation between Cu-Zn which indicates the sources come from traffic emission and street dust. This result was supported by the Principal Component Analysis (PCA) that revealed the presence of elements in the student hostel originated from the outdoor sources.
Biogas consisting of carbon dioxide/methane (CO2/CH4) gas mixtures has emerged as an alternative renewable fuel to natural gas. The presence of CO2 can decrease the calorific value and generate greenhouse gas. Hence, separating CO2 from CH4 is a vital step in enhancing the use of biogas. Zeolite and zeolite-based mixed matrix membrane (MMM) is considered an auspicious candidate for CO2/CH4 separation due to thermal and chemical stability. This review initially addresses the development of zeolite and zeolite-based MMM for the CO2/CH4 separation. The highest performance in terms of CO2 permeance and CO2/CH4 selectivity was achieved using zeolite and zeolite-based MMM, which exhibited CO2 permeance in the range of 2.0 × 10- 7-7.0 × 10- 6 mol m- 2 s- 1 Pa- 1 with CO2/CH4 selectivity ranging from 3 to 300. Current trends directed toward improving CO2/CH4 selectivity via modification methods including post-treatment, ion-exchanged, amino silane-grafted, and ionic liquid encapsulated of zeolite-based MMM. Those modification methods improved the defect-free and interfacial adhesions between zeolite particulates and polymer matrices and subsequently enhanced the CO2/CH4 selectivity. The modifications via ionic liquid and silane methods more influenced the CO2/CH4 selectivity with 90 and 660, respectively. This review also focuses on the possible applications of zeolite-based MMM, which include the purification and treatment of water as well as biomedical applications. Lastly, future advances and opportunities for gas separation applications are also briefly discussed. This review aims to share knowledge regarding zeolite-based MMM and inspire new industrial applications.
Buffing dust, generated from tannery industries, is a source of air pollution in Pakistan. Valorization of the waste into another useful material is important to deal with the environmental pollution, while reducing waste disposal costs in landfills. To demonstrate its technological strength, this work fabricates a thermal insulation material made of plaster of Paris and the buffing dust (from tanning waste) in the form of a composite with superior mechanical properties and low thermal conductivity. Buffing dust with concentrations ranging from 5 to 20% (w/w) were loaded in the composite. The samples synthesized were made slurry of plaster of Paris, buffing dust, and water at ambient temperature. The physico-mechanical properties of composite were analyzed. It was found that the composite had better thermal insulation properties than the panels of the plaster of Paris. Its thermal conductivity was reduced to 15% after adding buffing dust (20% w/w). All the materials had physico-chemical properties like tensile strength (0.02 MPa and 0.06 MPa), density (700-400 kg/m3), water absorption (5.2-8.6%) and thermal conductivity (0.17000-0.09218 W/m-K). Thermogravimetric analysis showed that the material was thermally stable at temperatures ranging from 145 to 177 °C, while FT-IR results revealed that the composite contained O-H, N-H, and CO functional groups. SEM analysis displayed that the composite's homogeneity was reduced with low voids due to buffing dust addition, while EDX analysis showed that the composite contained 23.62% of S, 26.76% of Ca, 49.2% of O and 0.42% of C. This implies that buffing dust could be recycled to manufacture heat insulation materials for construction sector to reduce air pollution, while minimizing energy consumption. By integrating the buffing dust from tanning waste and the plaster of Paris as a composite for construction sector, this work promotes the recycling of unused waste, while saving public funds. Instead of paying landfill fees and polluting soil, the waste may be recycled at lower cost, while reducing environmental damage.
Bauxite mining is not known to most Malaysian except recently due to environmental pollution issues in Kuantan, Pahang. Potential impacts are expected to go beyond physical environment and physical illness if the situation is not controlled. Loss of economic potentials, and the presence of unpleasant red dust causing mental distress, anger and community outrage. More studies are needed to associate it with chronic physical illness. While evidences are vital for action, merely waiting for a disease to occur is a sign of failure in prevention. All responsible agencies should focus on a wider aspect of health determinants rather than merely on the occurrence of diseases to act and the need to emphasize on sustainable mining to ensure health of people is not compromised.
The aim of this study was to determine the source apportionment of dust fall around Lake Chini, Malaysia. Samples were collected monthly between December 2012 and March 2013 at seven sampling stations located around Lake Chini. The samples were filtered to separate the dissolved and undissolved solids. The ionic compositions (NO3-, SO4(2-), Cl- and NH4+) were determined using ion chromatography (IC) while major elements (K, Na, Ca and Mg) and trace metals (Zn, Fe, Al, Ni, Mn, Cr, Pb and Cd) were determined using inductively coupled plasma mass spectrometry (ICP-MS). The results showed that the average concentration of total solids around Lake Chini was 93.49±16.16 mg/(m2·day). SO4(2-), Na and Zn dominated the dissolved portion of the dust fall. The enrichment factors (EF) revealed that the source of the trace metals and major elements in the rain water was anthropogenic, except for Fe. Hierarchical agglomerative cluster analysis (HACA) classified the seven monitoring stations and 16 variables into five groups and three groups respectively. A coupled receptor model, principal component analysis multiple linear regression (PCA-MLR), revealed that the sources of dust fall in Lake Chini were dominated by agricultural and biomass burning (42%), followed by the earth's crust (28%), sea spray (16%) and a mixture of soil dust and vehicle emissions (14%).