Displaying publications 61 - 80 of 118 in total

Abstract:
Sort:
  1. Fulltext Synthesis, Characterization and Development of Energy Harvesting Techniques Incorporated with Antennas: A Review Study
    Ibrahim HH, Singh MSJ, Al-Bawri SS, Islam MT
    Sensors (Basel), 2020 May 13;20(10).
    PMID: 32414069 DOI: 10.3390/s20102772
    The investigation into new sources of energy with the highest efficiency which are derived from existing energy sources is a significant research area and is attracting a great deal of interest. Radio frequency (RF) energy harvesting is a promising alternative for obtaining energy for wireless devices directly from RF energy sources in the environment. An overview of the energy harvesting concept will be discussed in detail in this paper. Energy harvesting is a very promising method for the development of self-powered electronics. Many applications, such as the Internet of Things (IoT), smart environments, the military or agricultural monitoring depend on the use of sensor networks which require a large variety of small and scattered devices. The low-power operation of such distributed devices requires wireless energy to be obtained from their surroundings in order to achieve safe, self-sufficient and maintenance-free systems. The energy harvesting circuit is known to be an interface between piezoelectric and electro-strictive loads. A modern view of circuitry for energy harvesting is based on power conditioning principles that also involve AC-to-DC conversion and voltage regulation. Throughout the field of energy conversion, energy harvesting circuits often impose electric boundaries for devices, which are important for maximizing the energy that is harvested. The power conversion efficiency (PCE) is described as the ratio between the rectifier's output DC power and the antenna-based RF-input power (before its passage through the corresponding network).
    Matched MeSH terms: Electronics
  2. A review of sustainable e-waste generation and management: Present and future perspectives
    Ismail H, Hanafiah MM
    J Environ Manage, 2020 Jun 15;264:110495.
    PMID: 32250915 DOI: 10.1016/j.jenvman.2020.110495
    Studies on sustainable management of waste from electrical and electronic equipment (or e-waste) have gained increasing attention from researchers around the world in recent years, with investigations into various aspects of e-waste management were investigated. Studies on e-waste generation by previous papers have been reviewed to provide an overview of the current research progress and recommendations for future research. The relevant existing studies were collected from various databases. Using content analysis, three main aspects of the existing studies were evaluated: the distribution and trends of the publications, the scope and boundaries of the studies, and the current research practices and research applications. Although there was a significant increasing trend of the amount of research on the evaluation of e-waste generation, however, the number of publications based on the countries of origin was still small. Another limitation was found related to the differences in the selection of research subjects and the level of analysis resulted in variations in the scopes and boundaries of the existing studies. Various other research areas were investigated further based on their research findings, but the analysis of various methodological aspects was complicated due to the increasing number of newly developed methodologies and the lack of comprehensive and up-to-date reviews on this research area. Additionally, there was also a need to evaluate emerging and/or older technology, which led electrical appliances to be overlooked. We found that comprehensive and up-to-date reviews of the methodological aspects of e-waste generation are still lacking. Based on the research gaps and limitations discussed, recommendations for future research were made.
    Matched MeSH terms: Electronics
  3. The True Amphipathic Nature of Graphene Flakes: A Versatile 2D Stabilizer
    Kuziel AW, Milowska KZ, Chau PL, Boncel S, Koziol KK, Yahya N, et al.
    Adv Mater, 2020 Aug;32(34):e2000608.
    PMID: 32672882 DOI: 10.1002/adma.202000608
    The fundamental colloidal properties of pristine graphene flakes remain incompletely understood, with conflicting reports about their chemical character, hindering potential applications that could exploit the extraordinary electronic, thermal, and mechanical properties of graphene. Here, the true amphipathic nature of pristine graphene flakes is demonstrated through wet-chemistry testing, optical microscopy, electron microscopy, and density functional theory, molecular dynamics, and Monte Carlo calculations, and it is shown how this fact paves the way for the formation of ultrastable water/oil emulsions. In contrast to commonly used graphene oxide flakes, pristine graphene flakes possess well-defined hydrophobic and hydrophilic regions: the basal plane and edges, respectively, the interplay of which allows small flakes to be utilized as stabilizers with an amphipathic strength that depends on the edge-to-surface ratio. The interactions between flakes can be also controlled by varying the oil-to-water ratio. In addition, it is predicted that graphene flakes can be efficiently used as a new-generation stabilizer that is active under high pressure, high temperature, and in saline solutions, greatly enhancing the efficiency and functionality of applications based on this material.
    Matched MeSH terms: Electronics
  4. Fulltext Infrapatellar fat pad resection or preservation during total knee arthroplasty: a meta-analysis of randomized controlled trials
    Sun C, Zhang X, Lee WG, Tu Y, Li H, Cai X, et al.
    J Orthop Surg Res, 2020 Aug 05;15(1):297.
    PMID: 32758250 DOI: 10.1186/s13018-020-01823-2
    BACKGROUND: The infrapatellar fat pad (IPFP) or Hoffa's fat pad is often resected during total knee arthroplasty in order to improve visibility. However, the management of the IPFP during total knee arthroplasty (TKA) is the subject of an ongoing debate that has no clear consensus. The purpose of this review was to appraise if resection of the IPFP affects clinical outcomes.

    METHODS: We conducted a meta-analysis to identify relevant randomized controlled trials involving infrapatellar fat pad resection and infrapatellar fat pad preservation during total knee arthroplasty in electronic databases, including Web of Science, Embase, PubMed, Cochrane Controlled Trials Register, Cochrane Library, Highwire, CBM, CNKI, VIP, and Wanfang database, up to March 2020.

    RESULTS: Nine randomized controlled trials, involving 783 TKAs (722 patients), were included in the systematic review. Outcome measures included patellar tendon length (PTL), Insall-Salvati ratio (ISR), rate of anterior knee pain, Knee Society Scores (KSS), and knee range of motion. The meta-analysis identified a trend toward the shortening of the patellar tendon with IPFP resection at 6 months (P = 0.0001) and 1 year (P = 0.001). We found no statistical difference in ISR (P = 0.87), rate of anterior knee pain within 6 months (p = 0.45) and 1 year (p = 0.38), KSS at 1 year (p = 0.77), and knee range of motion within 6 months (p = 0.61) and 1 year (0.46).

    CONCLUSION: Based on the available level I evidence, we were unable to conclude that one surgical technique of IPFP can definitively be considered superior over the other. More adequately powered and better-designed randomized controlled trial (RCT) studies with long-term follow-up are required to produce evidence-based guidelines regarding IPFP resection.

    Matched MeSH terms: Electronics
  5. The prevalence and risk factors of canine demodicosis: A retrospective long-term study of 409 cases
    Shchelkanov MY, Tabakaeva Moskvina TV, Kim EM, Derunov DA, Galkina IV
    Trop Biomed, 2020 Sep 01;37(3):778-782.
    PMID: 33612790 DOI: 10.47665/tb.37.3.778
    Canine demodicosis is a common skin disorder with multiple risk factors, including age and breed predisposition. There is relatively limited information about the risk factors for canine demodicosis in large canine populations. This retrospective case-control study was conducted by searching the electronic records of dogs with skin lesions for the presence of Demodex mites in skin scrapings. Diagnosis of demodicosis was based on the presence of skin lesions and mites in skin scrapings. Multivariate analysis was conducted using logistic regression analysis to estimate the relative risk and odds ratio of variables hypothesized to influence the risk of canine demodicosis, such as age, sex, breed, season, and parasitic infection. The results of multivariate logistic regression analysis showed a positive correlation between the dogs' age and demodicosis. Dogs older than three years, as well as puppies, had a high risk of demodicosis (P0.05). Breeds with the greatest association (odds ratio) with demodicosis included the American Staffordshire Terrier (OR=0.9) and Moscow Watchdog (OR=0.2). The presence of intestinal parasites, such as Diphyllobothrium latum, was significantly associated with demodicosis.
    Matched MeSH terms: Electronics
  6. Naked Eye Chemosensing of Anions by Schiff Bases
    Junaid HM, Batool M, Harun FW, Akhter MS, Shabbir N
    Crit Rev Anal Chem, 2020 Sep 08.
    PMID: 32897731 DOI: 10.1080/10408347.2020.1806703
    Spectacular color change during a chemical reaction is always fascinating. A variety of chemosensors including Schiff bases have been reported for selective as well as sensitive recognition of ions. This review explains the use of Schiff bases as color changing agents in the detection of anions. This magic of colors is attributed to change in the electronic structure of the system during reaction. Schiff base chemosensors are easy to synthesize, inexpensive and can be used for visual sensing of different ions. Development of Schiff base chemosensors is commonly based on the interactions between polar groups of Schiff bases and ionic species and the process of charge transfer, electron transfer and hydrogen bonding between Schiff bases and ionic species cause the color of the resultant to be changed. Therefore, designing of simple Schiff base chemosensors which are capable of selective sensing of different anions has attracted considerable interest. In particular, naked eye sensing through color change is important and useful since it allows sensing of ions through color changes without using any instrumental technique.HighlightsNaked eye sensors are of much interest these days due to their visual detection properties rather employing complex instrumentation.Optical sensors are sensitive, selective, cost effective and robust.The magic of color change is fascinating factor in detection by these sensors.The color change may be attributed by interaction between anion and Schiff base by different mechanism i.e. electron transfer, charge transfer, hydrogen bonding, ICT etc.LOD data is an evidence of their great efficiency.
    Matched MeSH terms: Electronics
  7. Fulltext A Review on Graphene-Based Light Emitting Functional Devices
    Junaid M, Md Khir MH, Witjaksono G, Ullah Z, Tansu N, Saheed MSM, et al.
    Molecules, 2020 Sep 14;25(18).
    PMID: 32937975 DOI: 10.3390/molecules25184217
    In recent years, the field of nanophotonics has progressively developed. However, constant demand for the development of new light source still exists at the nanometric scale. Light emissions from graphene-based active materials can provide a leading platform for the development of two dimensional (2-D), flexible, thin, and robust light-emitting sources. The exceptional structure of Dirac's electrons in graphene, massless fermions, and the linear dispersion relationship with ultra-wideband plasmon and tunable surface polarities allows numerous applications in optoelectronics and plasmonics. In this article, we present a comprehensive review of recent developments in graphene-based light-emitting devices. Light emissions from graphene-based devices have been evaluated with different aspects, such as thermal emission, electroluminescence, and plasmons assisted emission. Theoretical investigations, along with experimental demonstration in the development of graphene-based light-emitting devices, have also been reviewed and discussed. Moreover, the graphene-based light-emitting devices are also addressed from the perspective of future applications, such as optical modulators, optical interconnects, and optical sensing. Finally, this review provides a comprehensive discussion on current technological issues and challenges related to the potential applications of emerging graphene-based light-emitting devices.
    Matched MeSH terms: Electronics
  8. Simulated electronic health documentation: A cross-sectional exploration of factors influencing nursing students' intention to use
    Chan KG, Pawi S, Ong MF, Kowitlawakul Y, Goy SC
    Nurse Educ Pract, 2020 Oct;48:102864.
    PMID: 32920369 DOI: 10.1016/j.nepr.2020.102864
    The aim of this study was to investigate factors influencing nursing students' intention to use a simulated web-application 'Integrated Nursing Education System' for practicing electronic health documentation. The cross-sectional study was conducted at a Malaysian University that provides undergraduate nursing degree program. A total of 133 undergraduate nursing students in their year 2 to year 4 of the program were recruited. They had accessed the simulated web-application as part of the teaching-learning activities during the academic year 2016/2017. Technology Acceptance Model was used to guide the study. Validated questionnaires were used to measure the students' perceived ease of use, perceived usefulness, attitudes and intention to use the application. Data collection was done at the end of the semester. Data analysis was done using SPSS (19.0) and AMOS (23.0). Perceived usefulness was the most influential factor of the students' intention to use the simulated web-application. Perceived ease of use influenced their perceived usefulness significantly. Nurse educators should explain the usefulness of the simulated web-application before assigning students to access it to practice electronic health documentation. The availability of a stable internet access and IT support is important to influence students' perceived ease of use and intention to use the application.
    Matched MeSH terms: Electronics
  9. Fulltext Does quality stimulate customer satisfaction where perceived value mediates and the usage of social media moderates?
    Uzir MUH, Jerin I, Al Halbusi H, Hamid ABA, Latiff ASA
    Heliyon, 2020 Dec;6(12):e05710.
    PMID: 33367128 DOI: 10.1016/j.heliyon.2020.e05710
    Customer is considered as the king in the world of business. The issue of customer satisfaction in electronics home appliances has received greater attention from academics and practitioners. In other words, customer satisfaction is a vital consideration in marketing. With the development of technology, new and innovative electronic home appliances are available in the market. Customers purchase and use the costly electronic home appliances where the satisfaction issue is an important concern. In Bangladesh, working families find the electronic home appliance very necessary. Companies offer state-of- the-art appliances for customers' household works. Therefore, the study intends to investigate the effect of product quality (PQ), quality of service (SQ) and perceived value on customer satisfaction (CS). In addition, this study also seeks this relationship shaped by customer's perceived value (CPV) as a key mechanism and interacted by social media usage. A total of 300 households were selected on a judgmental basis from Dhaka city in Bangladesh using a structured questionnaire. Collected data were CB-SEM (AMOS-v24) and SPSS. The findings showed PQ and SQ have positive effects on CS; SQ affects, but PQ does not affect CPV. CPV has a mixing mediating effect on SQ and CS relationship and PQ and CS relationship. Importantly, the positive impact of PQ, SQ and CPV is greater on customers who exhibit higher social media use. The conceptual framework was buttressed by EDT theory. The study contributed to contextual and theoretical knowledge in regards to home appliances. The practicing managers can collect an insight of customer satisfaction for their business.
    Matched MeSH terms: Electronics
  10. E-waste recycling intention paradigm of small and medium electronics store managers in Bangladesh: An S-O-R perspective
    Mahmud I, Sultana S, Rahman A, Ramayah T, Cheng Ling T
    Waste Manag Res, 2020 Dec;38(12):1438-1449.
    PMID: 32364437 DOI: 10.1177/0734242X20914753
    Each year Bangladesh produces around 400,000 metric tonnes of e-waste. E-waste accumulation is expected to increase by 20% annually. In order to facilitate e-waste recycling, it is crucial to identify the factors. In this study, building on the stimulus-organism-response framework, we develop a research model to explore the effect of information publicity, ascription of responsibility and convenience of recycling on the recycling attitude, subjective norm, personal norm and perceived behaviour control which lead to recycling intention. Data were gathered from 127 small and medium electronics store managers. The structural equation modelling technique was used to test the paths. The result suggests a significant influence of the element of stimulus (S) on the element of organism (O). The relationship between the element of organism (O) and the element of response (R) is partial. This paper contributes to the body of work dedicated to helping us better understand the recycling behaviour from the stimulus-organism-response perspective. From the viewpoint of practice, this research sheds light on some of the challenges that the implementer might face when making strategy and policy for e-waste management in Bangladesh.
    Matched MeSH terms: Electronics
  11. Fulltext Tuning the Magnetism in Boron-Doped Strontium Titanate
    Zeng H, Wu M, Wang HQ, Zheng JC, Kang J
    Materials (Basel), 2020 Dec 12;13(24).
    PMID: 33322841 DOI: 10.3390/ma13245686
    The magnetic and electronic properties of boron-doped SrTiO3 have been studied by first-principles calculations. We found that the magnetic ground states of B-doped SrTiO3 strongly depended on the dopant-dopant separation distance. As the dopant-dopant distance varied, the magnetic ground states of B-doped SrTiO3 can have nonmagnetic, ferromagnetic or antiferromagnetic alignment. The structure with the smallest dopant-dopant separation exhibited the lowest total energy among all configurations considered and was characterized by dimer pairs due to strong attraction. Ferromagnetic coupling was observed to be stronger when the two adjacent B atoms aligned linearly along the B-Ti-B axis, which could be associated with their local bonding structures. Therefore, the symmetry of the local structure made an important contribution to the generation of a magnetic moment. Our study also demonstrated that the O-Ti-O unit was easier than the Ti-B-Ti unit to deform. The electronic properties of boron-doped SrTiO3 tended to show semiconducting or insulating features when the dopant-dopant distance was less than 5 Å, which changed to metallic properties when the dopant-dopant distance was beyond 5 Å. Our calculated results indicated that it is possible to manipulate the magnetism and band gap via different dopant-dopant separations.
    Matched MeSH terms: Electronics
  12. Fulltext Density Functional Theory Studies of the Electronic Structure and Muon Hyperfine Interaction in [Au25(SR)18]0 and [Au25(SeR)18]0 Nanoclusters
    Ahmad SN, Zaharim WN, Sulaiman S, Hasan Baseri DF, Mohd Rosli NA, Ang LS, et al.
    ACS Omega, 2020 Dec 29;5(51):33253-33261.
    PMID: 33403287 DOI: 10.1021/acsomega.0c04937
    Density functional theory computational investigation was performed to study the electronic structures, muon sites, and the associated hyperfine interactions in [Au25(SR)18]0 and [Au25(SeR)18]0 where R is phenylethane. The calculated electronic structures show inhomogeneous spin density distribution and are also affected by different ligands. The two most stable muon sites near Au atoms in the thiolated system are MAu11 and MAu6. When the thiolate ligands were replaced by selenolate ligands, the lowest energy positions of muons moved to MAu6 and MAu5. Muons prefer to stop inside the Au12 icosahedral shell, away from the central Au and the staple motifs region. Muonium states at phenyl ring and S/Se atoms in the ligand were found to be stable and the Fermi contact fields are much larger as compared to the field experienced by muons near Au atoms.
    Matched MeSH terms: Electronics
  13. Fulltext Absorption study of triangular and rectangular slotted on hollow pyramidal absorber
    Mohamad Faisal Asmadi, Hasnain Abdullah, Mas Izzaty Binti Fazin, Ahmad Rashidy Razali, Mohd Nasir Taib, Azizah Ahmad, et al.
    ESTEEM Academic Journal, 2020;16(2):21-30.
    MyJurnal
    Today, electromagnetic wave theory is commonly used in many engineering devices. However, such devices produce electromagnetic (EM) radiation, damaging people's health and the impact of other electronic device's operation. Therefore, Microwave Absorber has been widely used in anechoic chamber to measure equipment radiation and prevent unwanted radiation and electromagnetic interference. This research investigates the absorption performance of pyramidal absorbers with a slotted method design. This research used rectangular and triangular slotted on the hollow pyramidal absorber. There are six types of slotted: Design 1, Design 2, and Design 3
    which have triangular shapes, and Design 4, Design 5, and Design 6, have rectangular shapes. The pyramidal absorber is produced using CST Microwave Studio Suite. Afterward, the fabrication process is performed using cardboard and coated with Powdered Activated Carbon (PAC). Measurement had been done successfully via far-field measurement using an arch method at 1 GHz to 12 GHz. The slotted pyramidal absorber's absorptivity was taken in each frequency band and was tabulated in figure 10. The result is compared with their maximum absorption in each of the four frequency bands. Comparison based on slot design, triangular and rectangular each had its own advantages at a certain frequency. However, small rectangular slot of Design 1 shows consistent absorption performance at all frequency band.
    Matched MeSH terms: Electronics
  14. Fulltext A Single Centre Annual Audit on Computed Tomography Pulmonary Angiogram: Demographic, Clinical Scoring System, Patients’ Outcome
    Low Qin Jian, Teo Kuo Zhau, Mohd Nadzri Misni, Cheo Seng Wee
    Borneo Journal of Medical Sciences, 2020;14(2):11-18.
    MyJurnal
    Computed tomography pulmonary angiogram (CTPA) is widely used in the investigation of suspected pulmonary embolism. CTPA is not without adverse effects as it involves intravenous contrast injection and radiation exposure. The annual incidence of pulmonary embolism is 60 – 70 per 100,000 populations and CTPA remains the commonest imaging modality1. This study aims to audit all CTPA performed at Hospital Sultanah Nora Ismail, Batu Pahat, Johor for the entire year of 2018 to illustrate the demographic data, symptoms, risk factors, clinical scoring system applied and patients’ outcome. A retrospective study was conducted to audit all CTPA performed between 1st January to 31st December 2018 via the radiology department electronic records and patients’ records. There were a total of 60 CTPA performed in the entire year of 2018 with 16 positive and 44 negative scans. Among the 16 positive scans, 7 (44%) had a Wells score above 6, 6 (38%) had a Wells score between 2 – 6 and 3 (18%) had a Wells score less than 2. Out of the 16 positive scans, 4 (25%) were known malignancy and 1 was a known case of anti-phospholipid syndrome. All 60 patients had electrographs and arterial blood gases performed prior to CTPA. D dimer was performed in 15 cases (5%). Among the 16 positive scan patients, 4 (25%) passed away during the same admission directly or indirectly related to pulmonary embolism. This annual computed tomography audit report will assist clinicians in making better diagnostic decision when dealing with patients with suspected pulmonary embolism.
    Matched MeSH terms: Electronics
  15. Fulltext Teaching listening skills in the 21st century
    Wan Faizatul Azirah Ismayatim, Nur Dalila Mohamad Nazri, Ramiaida Darmi, Nursyuhada’ Ab Wahab, Nur Adibah Zamri, Haliza Harun, et al.
    Jurnal Inovasi Malaysia, 2020;4(1):173-192.
    MyJurnal
    This paper presents an innovation of a revolutionized self-directed English learning module entitled My Electronic Visual and Audio (MyEVO), which is designed and developed to assist language learners to conveniently acquire the required listening skills through the combination of current and state-of-the-art technology - Augmented Reality (AR) and mobile applications. Using Video Media method introduced by Gruba (1997, 2004), all listening practices in this module are based on video recording. Feedbacks gained from the users of the module indicate that learners are very excited and happy to use technology assisted module in acquiring listening skills compared to the traditional module. Educators also believe that this module cater the needs of the 21st century learners and is suitable to be used inside the classroom or as a self-directed learning module. Another key feature of this smart module highlighted by the educators is the ability of the mobile application that allows learners to engage with the e-global community known as ‘MyEVO community, where all users can share their answers and exchange opinions regarding the given questions. In addition, listening activities that were designed in this module also cover the Higher Order Thinking Skills (HOTS) needed in learning. Educators also agreed that this interactive feature does not only encourage the learners to be active in their learning but it also helps to reduce their anxiety, learning process becomes more interesting and helps to aid their understanding of the topics covered.
    Matched MeSH terms: Electronics
  16. Fulltext A systematic literature review on technology-enhanced learning in medical education
    May Honey Ohn
    Borneo Journal of Medical Sciences, 2020;14(1):3-17.
    MyJurnal
    This systematic review was aimed to evaluate the effectiveness of technology-enhanced learning (TEL) used in medical teaching for undergraduate medical students. The objectives are to (a) identify various teaching modalities which are used to enhance TEL; (b) evaluate whether TEL is more effective than traditional learning (TL) in cognitive and affective learning domain outcome. The empirical studies were searched in the following databases: Google Scholar, MEDLINE, ERIC, ProQuest, Cochrane Library and Scopus. All papers published from 2008 to 2018 were included. From eligible studies, the study design, study field, study population, intervention methods, type of assessment and learning achievement were abstracted and summarized the information. The search results were independently reviewed by two authors. From a pool of 1384 articles, 43 eligible articles were identified, enrolling 7292 undergraduate medical students examining comparative study between TEL and traditional learning. The results showed that there was a high degree of heterogeneity seen amongst the included studies in terms of TEL modalities used. The majority of intervention studies favoured online resources, while the rest used various offline multimedia electronic devices, virtual simulations and blended modes. Overall findings showed promising data that TEL is better than TL with regards to knowledge gain and skill acquisition, as well as providing higher student satisfaction. In all, the findings present blended learning in a positive and promising light in time, particularly where systematic reviews on technology-enhanced learning in the field of the undergraduate medical programme have produced mixed result.REVIEW ARTICLEA Systematic Literature Review on Technology-Enhanced Learning in Medical EducationMay Honey Ohn1*, Bareth Ravindran2, Chan Zhi Wei3, Khin Maung Ohn4, Ng Pey Luen5Borneo Journal of Medical Sciences 14 (1) January, 2020: 3 – 171 Emergency Department, Sandwell & West Birmingham NHS Trust, United Kingdom2 Surgical Department, Hospital Tuanku Ja’afar Seremban, Kuala Lumpur, Malaysia3 Orthopaedics Department, Hospital Sungai Buloh, Kuala Lumpur, Malaysia4 Department of Surgery, Faculty of Medicine and Health Sciences, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia5 Radiology Department, Hospital Queen Elizabeth II, Sabah, Malaysia* Corresponding author’s email: mayhoney.ohn@gmail.com Received: 14 July 2019 Accepted: 5 November 2019Borneo Journal of Medical SciencesBJMSKeywords: blended learning, technology-enhanced learning, medical education, hybrid learning, undergraduate medical students
    Matched MeSH terms: Electronics
  17. Fulltext Hybrid discrete hopfield neural network based modified clonal selection algorithm for VLSI circuit verification
    Sathasivam, Saratha, Mustafa Mamat, Mohd Shareduwan Mohd Kasihmuddin, Mohd. Asyraf Mansor
    Pertanika Journal of Science & Technology, 2020;28(1):227-243.
    MyJurnal
    Clonal selection algorithm and discrete Hopfield neural network are extensively employed for solving higher-order optimization problems ranging from the constraint satisfaction problem to complex pattern recognition. The modified clonal selection algorithm is a comprehensive and less iterative immune-inspired searching algorithm, utilized to search for the correct combination of instances for Very large-scale integrated (VLSI) circuit structure. In this research, the VLSI circuit framework consists of Boolean 3-Satisfiability instances with the different complexities and number of transistors are considered. Hence, a hybrid modified clonal selection algorithm with discrete Hopfield neural network is well developed to optimize the configuration of VLSI circuits with different number of electronic components such as transistors as the instances. Therefore, the performance of the developed hybrid model was assessed experimentally with the standard models, HNNVLSI-3SATES and HNNVLSI-3SATGA in term of circuit accuracy, sensitivity, robustness and runtime to complete the verification process. The results have demonstrated the developed model, HNNVLSI-3SATCSA produced a minimum error (consistently approaching 0), better accuracy (more than 80%) and faster computational time (less than 125 seconds) against changes in the complexity in term of the number of transistors. Furthermore, the developed hybrid model is able to minimize the computational burden and configurational noises for the variant of VLSI circuits.
    Matched MeSH terms: Electronics
  18. Fulltext One-year outcomes of two-week double-dose clopidogrel treatment following percutaneous coronary intervention in a state general hospital in Malaysia
    Doris George, Chang Chee Tao, Kumutha Kumarasamy, Asri Ranga
    Malaysian Journal of Medicine and Health Sciences, 2020;16(2):187-192.
    MyJurnal
    Introduction: Previous studies reported that a two-week double-dose clopidogrel treatment following percutaneous coronary intervention has no difference in safety compared to standard therapy. This study aimed to determine the all-cause readmission rate and survival after a year of percutaneous coronary intervention (PCI) in patients who were treated with two-week double-dose clopidogrel regimen. Methods: This was a retrospective study on patients who underwent PCI in a state general hospital in Malaysia in 2014. Patients’ one month and one-year survival status were retrieved using the hospital electronic patient management system. Patients who received a two-week course of 150mg clopidogrel and subsequently a one-year course of standard double antiplatelet therapy were included. Results: A total of 381 out of 563 patients who underwent PCI were included in the analysis, while those who were switched to ticagrelor and transferred to other hospitals post-PCI excluded. Patients had a mean age of 56.9 (SD 10.7), with majority male (331, 86.9%) and Malay (144, 37.8%). The PCI was mainly indicated for ST-elevated myocardial infarction (188, 49.3%), non-STEMI (114, 29.9%) and unstable angina (36, 9.4%). A total of 107 (28.1%) patients were readmitted within the one year post-PCI period. Readmissions were mainly due to ACS (55.5%) and bleeding events (2.4%). The 30-day and 1-year all-cause mortality was 33 cases and 43 cases, respectively. Conclu- sion: The low readmission and bleeding related readmission suggested that the two-week double-dose clopidogrel regimen was safe for the post PCI patients. Future randomised trial to establish the efficacy of this dosing regimen is therefore warranted.
    Matched MeSH terms: Electronics
  19. Fulltext A Survey on Daily Activity Inclination and Health Complaints among Urban Youth in Malaysia
    Chen AH, Rosli SA, Hovis JK
    J Environ Public Health, 2020;2020:9793425.
    PMID: 33376494 DOI: 10.1155/2020/9793425
    Environmental influence is one of the attributing factors for health status. Chronic interaction with electronic display technology and lack of outdoor activities might lead to health issues. Given the concerns about the digital impact on lifestyle and health challenges, we aimed to investigate the daily activity inclination and health complaints among the Malaysian youth. A self-administered questionnaire covering lifestyle and health challenges was completed by 220 youths aged between 16 and 25. There were a total of 22 questions. Seven questions inspected the patterns of indoor and outdoor activities. Fifteen questions focused on the visual and musculoskeletal symptoms linked to both mental and physical health. The total time spent indoors (15.0 ± 5.4 hours/day) was significantly higher than that spent outdoors (2.5 ± 2.6 hours/day) (t = 39.01, p < 0.05). Total time engrossed in sedentary activities (13.0 ± 4.5 hours/day) was significantly higher than that in nonsedentary activities (4.5 ± 3.8 hours/day) comprised of indoor sports and any outdoor engagements (t = 27.10, p < 0.05). The total time spent on electronic related activities (9.5 ± 3.7 hours/day) was were higher than time spent on printed materials (3.4 ± 1.6 hours/day) (t = 26.01, p < 0.05). The association of sedentary activities was positive in relation to tired eyes (χ2 = 17.58, p < 0.05), sensitivity to bright light (χ2 = 12.10, p < 0.05), and neck pain (χ2 = 17.27, p < 0.05) but negative in relation to lower back pain (χ2 = 8.81, p < 0.05). Our youth spent more time in building and engaged in sedentary activities, predominantly electronic usage. The health-related symptoms, both visual and musculoskeletal symptoms, displayed a positive association with a sedentary lifestyle and a negative association with in-building time.
    Matched MeSH terms: Electronics
  20. Fulltext Design, synthesis, and spasmolytic activity of thiophene-based derivatives via Suzuki cross-coupling reaction of 5-bromothiophene-2-carboxylic acid: their structural and computational studies
    Rasool N, Ikram HM, Rashid A, Afzal N, Hashmi MA, Khan MN, et al.
    Turk J Chem, 2020;44(5):1410-1422.
    PMID: 33488240 DOI: 10.3906/kim-1911-51
    In the current research work, a facile synthesis of a series of novel thiophene-based derivatives of 5-bromothiophene-2-carboxylic acid ( 1 ) have been synthesized. All analogs ( 5a - 5e , 10a - 10f ) were obtained from the coupling reaction of 5-bromothiophene-2-carboxylic acid ( 1 ) and different arylboronic acids with moderate-to-good yields under controlled and optimal conditions. The structures of the newly synthesized compounds were characterized through spectral analysis and their spasmolytic activity, and most of the compounds exhibited potentially good spasmolytic effect. Among the synthesized analogs, compound phenethyl 5-(3,4-dichlorophenyl)thiophene-2-carboxylate ( 10d ) particular showed an excellent spasmolytic effect with an EC 50 value of 1.26. All of the compounds were also studied for their structural and electronic properties by density functional theory (DFT) calculations. Through detailed insight into frontier molecular orbitals of the compounds and their different reactivity descriptors, it was found that the compounds 10c and 5c are the most reactive, while 10a is the most stable in the series. Furthermore, compounds 10c and 5c showed a very good NLO response with the highest β values.
    Matched MeSH terms: Electronics
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links