Displaying publications 61 - 80 of 176 in total

Abstract:
Sort:
  1. Mohd Yusof MY, Cauwels R, Deschepper E, Martens L
    J Forensic Leg Med, 2015 Aug;34:40-4.
    PMID: 26165657 DOI: 10.1016/j.jflm.2015.05.004
    The third molar development (TMD) has been widely utilized as one of the radiographic method for dental age estimation. By using the same radiograph of the same individual, third molar eruption (TME) information can be incorporated to the TMD regression model. This study aims to evaluate the performance of dental age estimation in individual method models and the combined model (TMD and TME) based on the classic regressions of multiple linear and principal component analysis. A sample of 705 digital panoramic radiographs of Malay sub-adults aged between 14.1 and 23.8 years was collected. The techniques described by Gleiser and Hunt (modified by Kohler) and Olze were employed to stage the TMD and TME, respectively. The data was divided to develop three respective models based on the two regressions of multiple linear and principal component analysis. The trained models were then validated on the test sample and the accuracy of age prediction was compared between each model. The coefficient of determination (R²) and root mean square error (RMSE) were calculated. In both genders, adjusted R² yielded an increment in the linear regressions of combined model as compared to the individual models. The overall decrease in RMSE was detected in combined model as compared to TMD (0.03-0.06) and TME (0.2-0.8). In principal component regression, low value of adjusted R(2) and high RMSE except in male were exhibited in combined model. Dental age estimation is better predicted using combined model in multiple linear regression models.
    Matched MeSH terms: Molar, Third/growth & development*; Molar, Third/radiography*
  2. Nambiar P, Yaacob H, Menon R
    J Forensic Odontostomatol, 1996 Dec;14(2):30-3.
    PMID: 9227080
    Teeth are the most durable structures in the human body. The timing and sequence of their development, as contained in dental development charts, have been used as valid criteria for age determination. The third molars however are the last teeth to erupt and are regarded as the most variable in the dentition. Age estimation in a legal context, using developing third molars must be carefully applied otherwise justice may miscarry. A case of wrongful use of the technique is presented here.
    Matched MeSH terms: Molar, Third/growth & development*; Molar, Third/radiography
  3. Kanneppady SK, Balamanikandasrinivasan, Kumaresan R, Sakri SB
    Dent Res J (Isfahan), 2013 May;10(3):353-8.
    PMID: 24019804
    The patterns of facial growth, jaw and tooth size are inherited and are likely to differ among population and races. Aim of this study is to evaluate and compare the pattern of third molar (3M) impaction among three different ethnic groups (Chinese, Indian, Malay) of patients attending AIMST Dental Institute, Malaysia.
    Matched MeSH terms: Molar, Third
  4. Ananda GK, Nambiar P, Mutalik S, Shanmuhasuntharam P
    Surg Radiol Anat, 2015 Nov;37(9):1099-108.
    PMID: 25850735 DOI: 10.1007/s00276-015-1473-0
    With the advent of cone-beam computed tomography (CBCT) for maxillofacial imaging, there has been a paradigm shift from two dimensional panoramic radiography to three dimensional imaging. This study investigated the microanatomy of the maxillary permanent first molar socket and its relationship to the floor of the maxillary sinus, especially for immediate or early implant placement.
    Matched MeSH terms: Molar
  5. Rodd HD, Graham A, Tajmehr N, Timms L, Hasmun N
    Int Dent J, 2020 Oct 08.
    PMID: 33031573 DOI: 10.1111/idj.12624
    BACKGROUND: Molar incisor hypomineralisation (MIH) is a common developmental dental condition that presents in childhood. Areas of poorly formed enamel affect one or more first permanent molars and can cause opacities on the anterior teeth. MIH presents a variety of challenges for the dental team as well as functional and social impacts for affected children.

    OBJECTIVES: Here, we provide an up-to-date review of the epidemiology, aetiology, diagnosis and clinical management of MIH.

    MATERIALS AND METHODS: A review of the contemporary basic science and clinical literature, relating to MIH, was undertaken using information obtained (up to 10 April 2020) from the electronic databases PubMed, Scopus, Web of Science and the Cochrane Library.

    RESULTS: There is a growing body of evidence relating to the aetiology, presentation and clinical management of MIH. Current knowledge appears to be focused on potential genetic aspects, as well as the development and validation of indices for the diagnosis and management of MIH. There has also been increasing recognition of the global and individual burden of this common condition.

    CONCLUSIONS: Dental health professionals should regularly appraise the basic science and clinical MIH literature to ensure that they provide the best possible short- and long-term care for their young patients.

    Matched MeSH terms: Molar
  6. Hiremath VK, Husein A, Mishra N
    J Int Soc Prev Community Dent, 2011 Jul;1(2):60-4.
    PMID: 24478956 DOI: 10.4103/2231-0762.97704
    The aims of this study were to determine the prevalence, size, shape, and location of torus palatinus (TP) and torus mandibularis (TM), and to assess their sex-related and age-related differences in the Malay population. Sixty-five subjects were assessed for the presence of both tori at the School of Dental Sciences University Sains Malaysia. The prevalence of TP was 38-63% and that of TM was 1-10%. TP was frequently more common in females than males (90.9% versus 9.1%; P < 0.05) and was frequently found in medium sizes, spindle shaped, and was often located at the combined premolar to molar areas. The prevalence of TM was not significantly different in males and females (33.3% versus 66.7%; P = 0.523), occurred most commonly in bilateral multiple form, and was often located at the canine to premolar area.
    Matched MeSH terms: Molar
  7. Gupta VV, Ramachandra SS
    J Indian Soc Periodontol, 2019 8 2;23(4):371-376.
    PMID: 31367137 DOI: 10.4103/jisp.jisp_654_18
    This report presents a 29-year-old aggressive periodontitis patient from Morocco with a history of orthodontic treatment. Despite all the first molars showing advanced bone loss, the maxillary anterior teeth did not show any periodontal destruction. The scientific literature rarely reports cases of aggressive periodontitis without involving maxillary anterior teeth. The treatment provided includes extraction of hopeless tooth, removal of overhanging restoration, scaling, root debridement, and regenerative periodontal therapy. The discussion highlights the dilemma during diagnosis of the case as either "iatrogenic periodontitis due to orthodontic treatment" or "localized aggressive periodontitis." The age group of 15-35 years is the common age group for patients' seeking orthodontic treatment and the occurrence of aggressive periodontitis. Sound knowledge of periodontitis and identification of early signs of aggressive periodontitis through meticulous periodontal examination may help in earlier identification and minimalistic treatment. Education regarding periodontitis, especially aggressive periodontitis, is essential among orthodontists and general dentists. This case report aims to discuss the dilemma involved during diagnosis of localized aggressive periodontitis.
    Matched MeSH terms: Molar
  8. Yusof NAM, Noor E, Reduwan NH, Yusof MYPM
    Clin Oral Investig, 2021 Mar;25(3):923-932.
    PMID: 32535703 DOI: 10.1007/s00784-020-03380-8
    OBJECTIVES: The aim of this study was to evaluate the accuracy of cone beam computed tomography (CBCT), periapical radiograph, and intrasurgical linear measurements in the assessment of molars with furcation defects.

    MATERIALS AND METHODS: This parallel, single-blinded, randomised controlled trial (RCT) consisted of 22 periodontitis patients who had molar with advanced furcation involvement (FI). All patients followed the same inclusion criteria and were treated following the same protocol, except for radiographic evaluation (CBCT vs. periapical). This study proposed and evaluated five parameters that represent the extent and severity of furcation defects in molars teeth, including CEJ-BD (clinical attachment loss), BL-H (depth), BL-V (height), RT (root trunk), and FW (width).

    RESULTS: There were no statistically significant differences between CBCT and intrasurgical linear measurements for any clinical parameter (p > 0.05). However, there were statistically significant differences in BL-V measurements (p molars. Meanwhile, the sensitivity were 62.8% and 56.9% for CBCT and periapical, respectively.

    CONCLUSIONS: Overall, when compared to the intrasurgical measurements, CBCT provided better diagnostic, sensitivity, and quantitative information on CAL, height, depth, and width of the furcation defects than periapical radiograph.

    CLINICAL RELEVANCE: An accurate presurgical furcation diagnostic can guide the clinicians from the stage of diagnosis to definitive management so that unnecessary periodontal surgical interventions can be prevented.

    Matched MeSH terms: Molar
  9. Aws Hashim Ali Al-Kadhim, Azlan Jaafar, Mohd Nazrin Isa
    MyJurnal
    Nonsurgical retreatment involves removing mechanical barriers such as gutta-percha to achieve proper cleaning and disinfection. The complexity of the anatomy of molar tooth gives challenge in retreatment procedure. Thus, this study evaluates the amount of residual gutta-percha after retreatment with rotary files (Reciproc Blue®) from each maxillary first molar canal using cone-beam computed tomography (CBCT) and the time required to accomplish it. Nine freshly extracted maxillary molars were instrumented and obturated. Preoperative CBCT was taken, and retreatment was done using Reciproc Blue®. CBCT was taken post retreatment, and the residual volume percentage of gutta-percha from each canal was calculated. The total retreatment time was recorded, and the data were statistically analyzed. The result shows no statistically significant difference in the amount of residual filling material in mesiobuccal, distobuccal, and palatal canal for maxillary first molar and total time used for retreatment with Reciproc Blue® system.

    Matched MeSH terms: Molar
  10. Aisha Maqsad Hussain, Gururajaprasad Kaggal Lakshmana Rao, Mohd Fadhli Khamis, Norehan Mokhtar
    MyJurnal
    Introduction: A parallel design randomized clinical trial was conducted to compare dentoalveolar and skeletal changes in two groups of patients who had completed twin block therapy; one group had a three-month night-time retention period whereas the other group had no retention period, after twin block therapy but before fixed applianc- es. Methods: 26 participants of Malay ethnicity aged 10 to 15 years were included in the trial and had an overjet of 5mm or greater, molar relationship greater than half cusp Class II on a skeletal Class II base which had been corrected to a Class I molar relationship following twin block therapy. Following randomization, the 26 were divided into two groups of 13. Group A had fixed appliances bonded immediately whereas group B continued wearing twin block at night for three months, after which fixed appliances were bonded. Lateral cephalograms assessed were those taken before randomization, upon twin block therapy completion (T1) and six months after bond-up of fixed appliances (T2). Results: Paired t-test showed several statistically significant dentoalveolar and skeletal changes in group A. In contrast, only condylar head position exhibited a statistically significant change in group B. Despite a statistical sig- nificance, changes measured in both groups were minimal at less than 2mm and therefore clinically insignificant. Independent t-test showed no statistically significant difference between the changes recorded in both groups. Con- clusion: The results suggest that a three-month night-time retention period after twin block therapy does not lead to any changes that may be considered clinically beneficial.
    Matched MeSH terms: Molar
  11. Ang Y, Tew IM
    J Conserv Dent, 2021 02 11;23(6):644-647.
    PMID: 34083924 DOI: 10.4103/JCD.JCD_533_20
    Restoring extensively damaged endodontically treated posterior teeth is always a challenge in dentistry. The use of endocrowns has gained popularity in restoring severely damaged endodontically treated teeth (ETT) in recent years. In this clinical report, a structurally compromised mandibular second molar with symptomatic irreversible pulpitis and normal apical tissue was endodontically treated. Surgical crown lengthening was attempted thereafter to increase the crown height. However, marginal periodontal tissue re-growth occurred after surgical crown lengthening. The tooth was subsequently restored with endocrown which was fabricated using computer-aided design and computer-aided manufacturing-based hybrid-ceramic. In conclusion, endocrown can be a viable restorative modality for ETT with compromised clinical crown height.
    Matched MeSH terms: Molar
  12. Suhaida Sabdi, Wan Zaripah Wan Bakar, Adam Husein
    MyJurnal
    Some restorative materials are susceptible to erosion but whether it also causes microleakage is still questionable. The aim of this study was to assess the microleakage of few restorative materials after immersion in acidic solution. Standardized ‘U’ shaped cavity of 4mm diameter and 2mm depth were prepared on buccal or lingual surface of 52 human premolar and molar teeth. The teeth were divided into 4 groups which contains 13 samples and 3 controls for each and were restored either with Filtek Z250 (Group 1), Fuji IX (Group 2), Fuji II LC (Group 3), or Silverfill amalgam (Group 4).
    All surfaces were painted with nail varnish leaving only 2mm of tooth structure surrounding the restoration before the study samples were immersed in acidic solution, lemon juice (pH 2.74) and control samples in deionised distilled water for 24 hours. Surface photos for erosion were taken before immersion in methylene blue for 7 days. After sectioning, the assessment of dye penetration was done using Leica Imaging System DMLM (Germany). Photos showed that Fuji IX demonstrated severe erosion but no obvious changes were seen on other materials. Kruskal-Wallis test indicated that microleakage between all four groups were statistically significant. The most significant difference was between Filtek Z250 and Fuji IX (p
    Matched MeSH terms: Molar
  13. Othman, S.A., Mookin, H., Asbollah, M.A., Hashim, N.A.
    Ann Dent, 2008;15(1):40-47.
    MyJurnal
    The objective of this retrospective study was to investigate what percentage of the dental students in the University of Malaya has a tooth size discrepancy. The sample comprised 40 good quality pre-treatment study models with fully erupted and complete permanent dentitions from first molar to first molar, which were selected from the dental students of the University of Malaya. The mesiodistal diameter tooth sizes were randomly measured manually from first molar to first molar using digital calliper (Mitutoyu) accurate to 0.01 mm, and the Bolton analyses for anterior and overall ratios were calculated by scientific calculator. Reproducibility analysis for intra- and interexaminer calibrations was assessed by measuring 10 study models twice, a week apart. A paired sample t-test and the correlation coefficient were used to evaluate the systematic and random errors of the measurements using Statistical Package for Social Sciences (SPSS) version 12.0. The reproducibility of the intra and inter-examiners for the sum of upper and lower mesiodistal tooth size were high (average mean difference = 0.62, r = 0.82). This study found 47.5% of the samples had anterior, and about 10% had overall· tooth width ratios greater than 2 standard deviations from Bolton's mean. Large percentage of the dental students of the University of Malaya has tooth size discrepancies outside of Bolton 2 standard deviations. It would seem prudent to routinely perform the tooth size analysis and include the findings into orthodontic treatment planning.
    Matched MeSH terms: Molar
  14. Mohamad I, Zulkifli S, Soleh M, Rahman R
    Malays Fam Physician, 2012;7(2-3):51-3.
    PMID: 25606258 MyJurnal
    Neck mass is a common condition in primary care. The most common affected area is the cervical lymph node. The neck region is also prone infection as structurally the nodes and spaces are in close contact with the upper respiratory tract and the alimentary tract. Oral cavity is one of the most common route for harbouring infection. Poor oral hygeine and periapical dental problems are the main causes. Thus, it is important to perform a complete oral cavity examination even when trismus is present. Besides dental caries, floor of the mouth should be inspected for oedema that may impose threat to the upper airway. We report a case of Ludwig's angina originating from a periapical lesion of the lower molar stressing the importance of oral examination in patient with neck mass.
    Matched MeSH terms: Molar
  15. Ujjal Kumar Ghosh, Chiu, Choon Hong, Jobrun Nandong, Shufeng, Shen
    MyJurnal
    In this paper, a mathematical model is developed based on mass and momentum balance for carbon dioxide absorption into aqueous ammonia solution. The model is simplified based on the assumption that the CO2 absorption into aqueous ammonia is a pseudo-first-order reaction. Laplace transform method is applied in order to solve the partial differential model equation. Finally, the CO2 molar flux is expressed as a function of partial pressure of CO2, concentration of aqueous ammonia, temperature and gas-liquid contact area. Variation of CO2 molar flux with partial pressure of CO2 and temperature is discussed and a comparison is performed with experimental data from literature. Variation of CO2 molar flux is also shown with gas-liquid contact area. The calculated flux from the model follows the same trend as that of the experimental data reported in literature and the accuracy is within the accepted limit. The mathematical model is very helpful to predict the CO2 molar flux as a function of partial pressure of CO2, concentration of aqueous ammonia, temperature and gas-liquid contact area.
    Matched MeSH terms: Molar
  16. Aws Hashim Al-Kadhim, Normaliza AB Malik, Azlan Jaafar, Zainul Ahmad Rajion
    MyJurnal
    Introduction: A few studies investigated the numerous potential endodontic uses of CBCT, including the
    examination of root canal morphology and presumed that CBCT was effective for the initial identification of
    such morphology; moreover CBCT is a reliable method for the detection of the MB2 canal when compared
    with the gold standard of physical sectioning of the specimen. The aim of this study was to identify the root
    and canal morphology of the maxillary first molars among Malaysians analysed by cone-beam computed
    tomography (CBCT) images.

    Materials and Methods: Maxillary first (n = 421) molars from Malaysian patients
    (n = 241) of Malay, Chinese and Indians inceptions were examined by two Endodontists using in vivo CBCT
    methods. The number and configuration of roots, the number of root canals, and the canal configuration
    according to Vertucci’s classification were determined.

    Results: Single roots were not found in maxillary
    first molars. The incidence of fused roots was 1.995% in the first molars between mesiobuccal and
    distobuccal roots. In (421) 3-rooted maxillary first molars, additional canals were found in 45.6% of the
    mesiobuccal (MB) roots and 0% of the distobuccal (DB) roots. Bilateral symmetry of the MB roots was found
    in 82.36% of the first molar. Only one tooth was found to have pulp stone inside the pulp chamber.

    Conclusions: The root and canal configuration of a Malaysian population showed different features from
    those of other populations. CBCT scans can enhance the understanding of root canal anatomy, with the
    potential of improving the outcome of endodontic treatment.
    Matched MeSH terms: Molar
  17. Shaeran TAT, Samsudin AR
    Case Rep Dent, 2018;2018:6540945.
    PMID: 29971169 DOI: 10.1155/2018/6540945
    Introduction: Dislodgement of orthodontic appliance into operation wounds may occur while performing orthognathic surgery. Its occurrence is commonly associated with bonded upper molar tube.

    Case Report: A 25-year-old gentleman presented with recurrent upper right vestibular abscess three months following a bimaxillary orthognathic surgery. A bonded molar orthodontic tube had dislodged into the wound during the operation. The clinical presentation initially mimics an odontogenic infection until our investigations revealed that it originated from the dislodged appliance. The abscess was drained, the wound site was explored, and the molar tube and neighbouring rigid fixation plates and screws were removed. The patient recovered well following the procedure.

    Conclusion: Dislodged metal orthodontic appliance in oral wound acts as a foreign body that may exert allergic reactions, infection, or inflammation. Pre- and postoperative intraoral examination of fixed orthodontic appliances including its count should be recorded in orthognathic surgery protocol.

    Matched MeSH terms: Molar
  18. Berkathullah M, Farook MS, Mahmoud O
    Biomed Res Int, 2018;2018:4072815.
    PMID: 30276206 DOI: 10.1155/2018/4072815
    The effectiveness of remineralizing agents in reducing dentine permeability by tubule occlusion using fluid filtration device functioning at 100 cmH2O (1.4 psi) pressure and SEM/EDX analysis were evaluated and compared. Seventy (n = 70) dentine discs of 1±0.2 mm width were prepared from sound permanent human molars. Fifty (n = 50) dentine discs were randomly divided into 5 groups (n = 10): Group 1: GC Tooth Mousse Plus (Recaldent GC Corporation Tokyo, Japan), Group 2: Clinpro™ White Varnish (3M ESPE, USA), Group 3: Duraphat® Varnish (Pharbil Waltrop GmbH, Germany), Group 4: Colgate Sensitive Pro-Relief™ dentifrice (Colgate Palmolive, Thailand), and Group 5: Biodentine™ (Septodont/UK). Dentine permeability was measured after treatment application at 10 minutes, artificial saliva immersion at 7 days, and citric acid challenge for 3 minutes. Data were analyzed by two-way repeated measures ANOVA. Dentine specimens (n = 20) were used for SEM/EDX analyses to obtain qualitative results on dentine morphology and surface deposits. Each treatment agent significantly reduced dentine permeability immediately after treatment application and created precipitates on treated dentine surfaces. All agents increased permeability values after 7 days of artificial saliva immersion except Clinpro White Varnish and Biodentine. Clinpro White Varnish exhibited significant resistance to acid challenge compared to others. Colgate Sensitive Pro-Relief dentifrice has a dual mechanism of action in reducing the dentine sensitivity.
    Matched MeSH terms: Molar
  19. Syarida Hasnur Safii, Lily Azura Shoaib, Halimah Awang
    Sains Malaysiana, 2013;42:107-114.
    The objectives of this study were to determine the prevalence of caries and gingivitis in a selected population of schoolchildren and to examine the relationship between prevalence of the diseases with their oral health behaviours. A total of 39 subjects, aged nine to 11 years, from 147 schoolchildren of a private school in Selangor, Malaysia were examined by two calibrated examiners trained in their own field. The subjects were interviewed using structured questionnaires. Erupted first permanent molars and permanent anterior teeth were examined. Dental caries, Plaque Score and Gingival Index were recorded. Descriptive statistics using frequency distribution were used to analyse the data. Forty-one percent of the subjects presented with more than 75% of total plaque accumulation. Prevalence of caries and gingivitis for the subject population was 18.0% and 31.0%, respectively. Caries was found on both the smooth (buccal/lingual/palatal) and occlusal surfaces. Gingivitis, diagnosed around 31.6% of teeth, was found more on the incisors (16.9%) than molars (14.7%). A relatively higher distribution of gingivitis was found on labial aspect of the incisors (5.5%) and palatal/ lingual aspect of the molars (4.7%). The prevalence of caries and gingivitis in this selected population was low. Certain dentition sites were more susceptible to dental caries and gingivitis. Good tooth brushinghabits and regular visits to the dentists do not guarantee the efficacy of plaque removal.
    Matched MeSH terms: Molar
  20. Mohd Ariffin S, Dalzell O, Hardiman R, Manton DJ, Parashos P, Rajan S
    Eur Arch Paediatr Dent, 2020 Aug;21(4):519-525.
    PMID: 32100200 DOI: 10.1007/s40368-020-00515-z
    AIM: Successful endodontic treatment of primary teeth requires comprehensive knowledge and understanding of root canal morphology. The purpose of this study was to investigate the root canal configurations of primary maxillary second molars using micro-computed tomography.

    METHODS: Extracted human primary maxillary second molars (n = 57) were scanned using micro-computed tomography and reconstructed to produce three-dimensional models. Each root canal system was analysed qualitatively according to Vertucci's classification.

    RESULTS: 22.8% (n = 13) of the sample presented with the fusion of the disto-buccal and palatal roots; of these, Type V was the most prevalent classification. For teeth with three separate roots (n = 44), the most common root canal type was Type 1 for the palatal canal (100%) and disto-buccal canal (77.3%) and Type V for the mesio-buccal canal (36.4%). Overall, 7% (n = 4) of mesio-buccal canals were 'unclassifiable'.

    CONCLUSION: The root canal systems of primary maxillary second molars were not only complex but had a range of configurations that may contribute to unfavourable clinical outcomes after endodontic treatment.

    Matched MeSH terms: Molar
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links