Displaying publications 61 - 80 of 619 in total

Abstract:
Sort:
  1. Ariff, A.B., Ooi, T.C., Shamsuddin, Z.H., Halimi, M.S.
    MyJurnal
    The exponential fed-batch cultivation of Bacillus sphaericus UPMB10 in 2 l stirred tank fermenter was performed by feeding the initial batch culture with 14 g l-1 of glycerol according to the algorithm aimed at controlling the specific growth rate (μ) of the bacterium. Very high viable cell count (1.14 x 1010 cfu ml-1), which was four times higher as compared to batch cultivation, was achieved in the fed-batch with a controlled μ at 0.4 h-1. In repeated exponential fed-batch cultivation, consisting of four cycles of harvesting and recharging, a final cell concentration of 1.9 x 1011 cfu ml-1 was obtained at the end of the fourth cycle (46 h). Meanwhile, acetylene reduction of cell samples collected from repeated fed-batch cultivation remained unchanged and was maintained at around 20 nmol C2H2 h-1 ml-1 after prolonged cultivation period, and was comparable to those obtained in batch and exponential fed-batch cultivation. Glycerol could be used as a carbon source for high performance cultivation of B. sphaericus, a nitrogen fixing bacterium, in repeated fed-batch cultivation with high cell yield and cell productivity. The productivity (0.68 g l-1 h-1) for repeated fed-batch cultivation increased about 6 times compared to that obtained in conventional batch cultivation (0.11 g l1 h-1). A innovative method in utilizing glycerol for efficient cultivation of nitrogen fixing bacterium could be beneficial to get more understanding and reference in manipulating the integrated plans for sustainable and profitable biodiesel industry.
    Matched MeSH terms: Nitrogen
  2. Arifin MH, Kayode JS, Ismail KI, Abdullah M, Embrandiri A, Nazer SM, et al.
    Data Brief, 2020 Dec;33:106595.
    PMID: 33318980 DOI: 10.1016/j.dib.2020.106595
    Industrial, and municipal wastes are part of the main sources of environmental hazards as well as groundwater and surface water pollutions. If not well composed, treated, and safely disposed, it could permeate through the subsurface lithologies by reaching down to the underground water aquifers, particularly in zones of unprotected aquifer units. Pollutants, most especially the landfills leachates that encompassed organic contaminants, ammonia, nitrates, total nitrogen, suspended solids, heavy metals and soluble inorganic salts, i.e., soluble nitrogen, sulphur compound, sulphate and chlorides, could posed undesirable environmental impacts due to inappropriate disposals that may give rise to gaseous fumes and leachate formations. An electrical resistivity geophysical technique utilizing the RES2D no-invasive, cost-effective and rapid method of data collection was integrated with the 3D Oasis Montaj software to approximate the volume of the generated rectangular prism model of the contaminants delineated from mixtures of the industrial, and municipal wastes plumes to be 312,000 m 3.
    Matched MeSH terms: Nitrogen
  3. Arina N, Ashikin CN, Hidayah N, Fairoz M, Rozaimi M
    Data Brief, 2020 Feb;28:104979.
    PMID: 31909102 DOI: 10.1016/j.dib.2019.104979
    This paper presents data on nitrogen characteristics in a tropical seagrass meadow located in Sungai Pulai estuary (Johor, Malaysia) and is related to the article "Nitrogen dynamics in tropical seagrass meadows under heavy anthropogenic influence" [1]. Field sampling conducted from August 2015 to May 2016 aimed to collect sediments and seagrass tissues for analysis of nitrogen elemental content and stable isotope values. Sediment samples and seagrass tissue (above-ground and below-ground parts) were collected by using PVC cores. The information is presented as unprocessed and partially data, which incorporates nitrogen content (in %) and δ15N values (‰) of sediment and seagrass tissue samples. Nitrogen loadings in the seagrass sediments, as based on down-core data of sediment samples up to 30 cm depths, should be read with [1] to comprehend the baseline nitrogen dynamics of the study area.
    Matched MeSH terms: Nitrogen
  4. Arumugam K, Ahmad MF, Yaacob NS, Ikram WM, Maniyam MN, Abdullah H, et al.
    Heliyon, 2020 Jul;6(7):e04556.
    PMID: 32775725 DOI: 10.1016/j.heliyon.2020.e04556
    Natural growth-promoting nutrients extracted from aquaculture sludge waste can be used to maximise microalgal growth. This study identified the influence of aquaculture sludge extract (SE) on four microalgae species. Conway or Bold's Basal Media (BBM) was supplemented with SE collected from a Sabak Bernam shrimp pond (SB) and Kota Puteri fish pond (KP), and tested using a novel microplate-incubation technique. Five different autoclave extraction treatment parameters were assessed for both collected SE, i.e., 1-h at 105 °C, 2-h at 105 °C, 1-h at 121 °C, 2-h at 121 °C, and 24-h at room temperature (natural extraction). Microalgae culture in the microplates containing control (media) and enriched (media + SE) samples were incubated for nine days, at 25 °C with the light intensity of 33.75 μmol photons m-2 s-1 at 12-h light/dark cycle. The total dissolved nitrogen (TDN) and total dissolved phosphorus (TDP) in KP SE were 44.0-82.0 mg L-1 and 0.96-8.60 mg L-1. TDN (8.0%-515.0%) and TDP (105%-186 %) were relatively higher in KP SE compared to SB SE. The growth of microalgae species Nannochloropsis ocenica showed significant differences (p < 0.05) between the five extraction treatments from SB and the control. However, Chlorella vulgaris, Neochloris conjuncta, and Nephroclamys subsolitaria showed no significant differences (p > 0.05) in SB SE. N. ocenica, C. vulgaris, and N. conjuncta showed significant differences (p < 0.05) between five extraction treatments from KP and the control while N. subsolitaria showed no significant difference (p > 0.05). The specific growth rate (SGR) in the exponential phase of all microalgae species were relatively higher in SB SE compared to KP SE. While the organic matter content of KP SE was relatively higher, there were no significant differences in microalgae growth compared to SB SE. Nonetheless, modified SE did influence microalgae growth compared to the control. This study shows that modified SE could be used as enrichment media for microalgae cultivation.
    Matched MeSH terms: Nitrogen
  5. Arzaee NA, Mohamad Noh MF, Mohd Ita NSH, Mohamed NA, Mohd Nasir SNF, Nawas Mumthas IN, et al.
    Dalton Trans, 2020 Aug 28;49(32):11317-11328.
    PMID: 32760991 DOI: 10.1039/d0dt00683a
    The development of semiconductor heterojunctions is a promising and yet challenging strategy to boost the performance in photoelectrochemical (PEC) water splitting. This paper describes the fabrication of a heterojunction photoanode by coupling α-Fe2O3 and g-C3N4via aerosol-assisted chemical vapour deposition (AACVD) followed by spin coating and air annealing. Enhanced PEC performance and stability are observed for the α-Fe2O3/g-C3N4 heterojunction photoanode in comparison to pristine α-Fe2O3 and the reason is systematically discussed in this paper. Most importantly, the fabricated α-Fe2O3/g-C3N4 film shows impressive stability, retaining more than 90% of the initial current over 12 h operating time. The excellent stability of the heterojunction photoanode is achieved due to the unique nanoflake structure of α-Fe2O3 induced by AACVD. This nanostructure promotes good adhesion with the g-C3N4 particles, as the particles tend to be trapped within the α-Fe2O3 valleys and eventually create strong and large interfacial contacts. This leads to improved separation of charge carriers at the α-Fe2O3/g-C3N4 interface and suppression of charge recombination in the photoanode, which are confirmed by the transient decay time, charge transfer efficiency and electrochemical impedance analysis. Our findings demonstrate the importance of nanostructure engineering for developing heterojunction structures with efficient charge transfer dynamics.
    Matched MeSH terms: Nitrogen Compounds
  6. Asad Shah, Mohammad Akmal, Mohammad Jamal Khan, Mohammad Arif
    Sains Malaysiana, 2014;43:1811-1819.
    Yield performance in wheat (Triticum aestivum) was compared under crop residue, tillage system and nitrogen rate treatments in cereal based cropping system. The experiments were conducted at Agronomy Research Farm, The University of Agriculture, Peshawar, in 2009-2010 and 2010-2011. Chopped crop residue on dry matter basis (5 t ha1-) of legume (Vigna unguicuata, var. Ebney) and cereal (Zea mays, var. Azam) was applied in main plots with no residue treatments and plowed with Mould Board (MB) and Cultivator as deep and shallow treatments, respectively. A month after the crop residue and tillage system treatments, field was uniformly plowed with cultivator and wheat was sown with drill in rows 25 cm apart in the month of November on both years. Both P2O55 and K2O (80 and 40 kg ha , respectively) were applied uniformly to all fields before sowing. Nitrogen as subplot treatment (0, 40, 80, 120 and 160 kg ha-1) was applied in two splits, half at 15 and the other half at 45 days after sowing with uniform cultural practices for crop growth and development. Compared to year 1, crop of year 2 showed better phenology with extended life cycle (LC). On two years average across tillage and N treatments, biological yield did not change (p<0.05) under the residue but did report lower at no-residue treatment. Nonetheless, grain yield showed a significant (p<0.05) change with the highest in legume followed by cereal and the lowest in no-residue treatments. A non-significant tiller number and significant variations in grain weight and spike m-2 were observed that influenced the grain and biological yield differently. Deep than shallow tillage resulted in better traits, which returned better biomass and grain yield. Nitrogen application from control to every increment showed a significant (p<0.05) improvement in all observations contributing in yield. The study confirms the significance of legume vs. cereal over no-crop residue incorporated through deep tillage system with optimum N (120 kg ha-1) in cereal-based cropping system for sustainable performance to sustain soil C:N for future production.
    Matched MeSH terms: Nitrogen
  7. Ashikin CN, Rozaimi M, Arina N, Fairoz M, Hidayah N
    Mar Pollut Bull, 2020 Jan;150:110628.
    PMID: 31740184 DOI: 10.1016/j.marpolbul.2019.110628
    Nitrogen is essential for seagrass productivity but excesses in nitrogen exposure contribute to declines in meadow health. This study reports baseline data of bulk nitrogen loadings and contents in surficial sediments and seagrass tissues to determine the extent of nitrogen inputs in meadows of Sungai Pulai estuary (Johor, Malaysia). The sediment contained relatively low nitrogen loadings (mean range of 91-94 g N m-2) with likely origins from land-based sources. At the meadow-level, Enhalus acoroides, Cymodocea serrulata and Thalassia hemprichii are the most important species as nitrogen sinks. The highest δ15N values of seagrass tissues were recorded for T. hemprichii (10.7 ± 0.4‰), which indicated an elevated capacity for internal recycling of nitrogen. The data demonstrates the provision of ecosystem services by the meadows in mitigating excess nitrogen imported into the estuary. Seagrasses health, however, needs to be at optimum levels for the effectiveness of the meadow as a nutrient sink.
    Matched MeSH terms: Nitrogen*; Nitrogen Cycle*
  8. Asis T, Zahrim AY, Assis K
    Sains Malaysiana, 2017;46:1201-1210.
    Pengkomposan tandan buah kosong (EFB) dan sisa efluen kilang (POME) merupakan pendekatan lestari bagi menukarkan EFB dan POME kepada baja kompos. Pengkomposan adalah satu proses biologi yang memerlukan pengawalan yang optimum agar nutrien yang terhasil adalah tinggi dan stabil. Cabaran utama yang dihadapi oleh industri kompos ialah untuk menghasilkan kompos yang bernutrien tinggi dan stabil. Objektif kajian ini ialah untuk menganalisis prestasi jangka panjang bagi loji kompos terpilih melalui kandungan nutrien kompos yang dihasilkan. Penyelidikan ini mengkaji prestasi tiga tahun bagi empat loji kompos di Malaysia iaitu loji kompos Merotai, loji kompos Binuang, loji kompos Tanah Merah dan loji kompos Elphil. Prestasi kandungan nutrien yang diambil kira termasuklah nitrogen, kalium, nisbah karbon kepada nitrogen, kandungan kelembapan dan agregat kompos. Sebanyak 1,465 set data nutrien dianalisis secara deskriptif. Secara keseluruhannya, prestasi kandungan nutrien kesemua loji kompos yang dikaji berjaya memenuhi keperluan minimum industri sawit. Namun terdapat kes kompos yang dihasilkan mengandungi nutrien kalium yang tidak mencapai keperluan minimum industri dan kandungan kelembapan kompos yang tinggi. Kesimpulannya, masih terdapat ruang untuk penambahbaikan dalam proses pengkomposan agar kompos yang dihasilkan mengandungi nutrien yang stabil dan memenuhi keperluan minimum industri
    Matched MeSH terms: Nitrogen
  9. Asma Liyana Shaari, Misni Surif, Faazaz Abd. Latiff, Wan Maznah Wan Omar, Mohd Noor Ahmad
    Trop Life Sci Res, 2011;22(1):-.
    MyJurnal
    Many reports have revealed that the abundance of microalgae in shrimp ponds vary with changes in environmental factors such as light, temperature, pH, salinity and nutrient level throughout a shrimp culture period. In this study, shrimp cultivation period was divided into three stages (initial = week 0–5, mid = week 6–10 and final = week 11–15). Physical and chemical parameters throughout the cultivation period were studied and species composition of microalgae was monitored. Physical parameters were found to
    fluctuate widely with light intensity ranging between 182.23–1278 µmol photon m–2s–1, temperature between 29.56ºC –31.59ºC, dissolved oxygen (DO) between 4.56–8.21 mg/l, pH between 7.65–8.49 and salinity between 20‰–30‰. Ammonium (NH4+-N), nitrite (NO2– -N), nitrate (NO3– -N), and orthophosphate (PO43– -P) concentrations in the pond at all cultivation stages ranged from 0.017 to 0.38 mg/l, 0.24 to 2.12 mg/l, 0.06 to 0.98 mg/l and 0.16 to 1.93 mg/l respectively. Statistical test (ANOVA) showed that there were no significant difference (p
    Matched MeSH terms: Nitrogen Oxides
  10. Atarod P, Khlaife E, Aghbashlo M, Tabatabaei M, Hoang AT, Mobli H, et al.
    J Hazard Mater, 2021 04 05;407:124369.
    PMID: 33160782 DOI: 10.1016/j.jhazmat.2020.124369
    This study was set up to model and optimize the performance and emission characteristics of a diesel engine fueled with carbon nanoparticle-dosed water/‎diesel emulsion fuel using a combination of soft computing techniques. Adaptive neuro-fuzzy inference system tuned by particle ‎swarm algorithm was used for modeling the performance and emission parameters of the engine, while optimization of the engine operating parameters and the fuel composition was conducted via multiple-objective particle ‎swarm algorithm. The model input variables were: injection timing (35-41° CA BTDC), engine load (0-100%), nanoparticle dosage (0-150 μM), and water content (0-3 wt%). The model output variables included: brake specific fuel consumption, brake thermal efficiency, as well as carbon monoxide, carbon dioxide, nitrogen oxides, and unburned hydrocarbons emission concentrations. The training and testing of the modeling system were performed on the basis of 60 data patterns obtained from the experimental trials. The effects of input variables on the performance and emission characteristics of the engine were thoroughly analyzed and comprehensively discussed as well. According to the experimental results, injection timing and engine load could significantly affect all the investigated performance and emission parameters. Water and nanoparticle addition to diesel could markedly affect some performance and emission parameters. The modeling system could predict the output parameters with an R2 > 0.93, MSE nitrogen oxides, and unburned hydrocarbon emission concentrations ‎were found to be ‎7.26‎ vol%‎, ‎0.46 vol%‎, ‎95.7‎ ppm, and‎ 36.2 ppm, respectively, under the ‎selected optimal operating conditions while the quantity of brake thermal efficiency was found at an acceptable level (‎34.0‎%).‎ In general, the applied soft computing combination appears to be a promising approach to model and optimize operating parameters and fuel composition of diesel engines.
    Matched MeSH terms: Nitrogen Dioxide; Nitrogen Oxides
  11. Awang MB, Jaafar AB, Abdullah AM, Ismail MB, Hassan MN, Abdullah R, et al.
    Respirology, 2000 Jun;5(2):183-96.
    PMID: 10894109
    OBJECTIVE: Observations have been made on the long-term trends of major air pollutants in Malaysia including nitrogen dioxide, carbon monoxide, the ozone and total suspended particulate matter (particularly PM10), and sulfur dioxide, emitted from industrial and urban areas from early 1970s until late 1998.

    METHODOLOGY: The data show that the status of atmospheric environment in Malaysia, in particular in highly industrialized areas such as Klang Valley, was determined both by local and transboundary emissions and could be described as haze and non-haze periods.

    RESULTS: During the non-haze periods, vehicular emissions accounted for more than 70% of the total emissions in the urban areas and have demonstrated two peaks in the diurnal variations of the aforementioned air pollutants, except ozone. The morning 'rush-hour' peak was mainly due to vehicle emissions, while the late evening peak was mainly attributed to meteorological conditions, particularly atmospheric stability and wind speed. Total suspended particulate matter was the main pollutant with its concentrations at few sites often exceeding the Recommended Malaysia Air Quality Guidelines. The levels of other pollutants were generally within the guidelines. Since 1980, six major haze episodes were officially reported in Malaysia: April 1983, August 1990, June 1991, October 1991, August to October 1994, and July to October 1997. The 1997 haze episode was the worst ever experienced by the country. Short-term observations using continuous monitoring systems during the haze episodes during these periods clearly showed that suspended particulate matter (PM10) was the main cause of haze and was transboundary in nature. Large forest fires in parts of Sumatra and Kalimantan during the haze period, clearly evident in satellite images, were identified as the probable key sources of the widespread heavy haze that extended across Southeast Asia from Indonesia to Singapore, Malaysia and Brunei. The results of several studies have also provided strong evidence that biomass burning is the dominating source of particulate matter. The severity and extent of 1997's haze pollution was unprecedented, affecting some 300 million people across the region. The amount of economic costs suffered by Southeast Asian countries during this environmental disaster was enormous and is yet to be fully determined. Among the important sectors severely affected were air and land transport, shipping, construction, tourism and agro-based industries. The economic cost of the haze-related damage to Malaysia presented in this study include short-term health costs, production losses, tourism-related losses and the cost of avertive action. Although the cost reported here is likely to be underestimated, they are nevertheless significant (roughly RM1 billion).

    CONCLUSIONS: The general air quality of Malaysia since 1970 has deteriorated. Studies have shown that should no effective countermeasures be introduced, the emissions of sulfur dioxide, nitrogen oxides, particulate matter, hydrocarbons and carbon monoxide in the year 2005 would increase by 1.4, 2.12, 1.47 and 2.27 times, respectively, from the 1992 levels.

    Matched MeSH terms: Nitrogen Dioxide/analysis
  12. Azami MS, Nawawi WI, Ali H. Jawad, Ishak MAM, Azami MS, K. Ismail
    Sains Malaysiana, 2017;46:1390-1316.
    Nitrogen doped titanium dioxide (N-doped TiO2
    ) was synthesized by microwave using urea as nitrogen sources with
    commercially available TiO2
    -P25. The N-doped TiO2
    was compared with unmodified TiO2
    by carrying out the investigation
    on its properties using x-ray diffraction (XRD) analysis, Brunauer-Emmett-Teller (BET), Fourier transformed infrared
    spectroscopy (FTIR) and diffuse reflectance spectroscopy (UV-Vis DRS). The photocatalytic activities of N-doped TiO2
    and unmodified TiO2 were studied for photodegradation of reactive red 4 (RR4) under light emitting diode (LED) light
    irradiation. An active photoresponse under LED light irradiation was observed from N-doped TiO2
    with 60 min of time
    irradiation to complete RR4 color removal while no photocatalytic degradation was observed from unmodified.
    Matched MeSH terms: Nitrogen
  13. Azami MS, Jalil AA, Hassan NS, Hussain I, Fauzi AA, Aziz MAA
    J Hazard Mater, 2021 07 15;414:125524.
    PMID: 33647620 DOI: 10.1016/j.jhazmat.2021.125524
    In this work, fibrous silica-titania (FST) was successfully prepared by the microemulsion method prior to the addition of three types of carbonaceous materials: graphitic-carbon nitride, g-C3N4 (CN), graphene nanoplatelets (GN), and multi-wall carbon nanotubes, MWCNT (CNT), via a solid-state microwave irradiation technique. The catalysts were characterized using XRD, FESEM, TEM, FTIR, UV-Vis DRS, N2 adsorption-desorption, XPS and ESR, while their photoactivity was examined on the degradation of toxic 2-chlorophenol (2-CP). The result demonstrated that the initial reaction rate was in the following order: CNFST (5.1 × 10-3 mM min-1) > GNFST (2.5 × 10-3 mM min-1) > CNTFST (2.3 × 10-3 mM min-1). The best performance was due to the polymeric structure of g-C3N4 with a good dispersion of C and N on the surface FST. This dispersion contributed towards an appropriate quantity of defect sites, as a consequence of the greater interaction between g-C3N4 and the FST support, that led to narrowed of band gap energy (2.98 eV to 2.10 eV). The effect of scavenger and ESR studies confirmed that the photodegradation over CNFST occurred via a Z-scheme mechanism. It is noteworthy that the addition of green carbonaceous materials on the FST markedly enhanced the photodegradation of toxic 2-CP.
    Matched MeSH terms: Nitrogen Compounds
  14. Azami NA, Wirjon IA, Kannusamy S, Teh AH, Abdullah AA
    3 Biotech, 2017 May;7(1):75.
    PMID: 28452023 DOI: 10.1007/s13205-017-0716-7
    The contribution of microbial depolymerase has received much attention because of its potential in biopolymer degradation. In this study, the P(3HB) depolymerase enzyme of a newly isolated Burkholderia cepacia DP1 from soil in Penang, Malaysia, was optimized using response surface methodology (RSM). The factors affecting P(3HB) depolymerase enzyme production were studied using one-variable-at-a-time approach prior to optimization. Preliminary experiments revealed that the concentration of nitrogen source, concentration of carbon source, initial pH and incubation time were among the main factors influencing the enzyme productivity. An increase of 9.4 folds in enzyme production with an activity of 5.66 U/mL was obtained using optimal medium containing 0.028% N of di-ammonium hydrogen phosphate and 0.31% P(3HB-co-21%4HB) as carbon source at the initial pH of 6.8 for 38 h of incubation. Moreover, the RSM model showed great similarity between predicted and actual enzyme production indicating a successful model validation. This study warrants the ability of P(3HB) degradation by B. cepacia DP1 in producing higher enzyme activity as compared to other P(3HB) degraders being reported. Interestingly, the production of P(3HB) depolymerase was rarely reported within genus Burkholderia. Therefore, this is considered to be a new discovery in the field of P(3HB) depolymerase production.
    Matched MeSH terms: Nitrogen
  15. Aziz HA, Adlan MN, Zahari MS, Alias S
    Waste Manag Res, 2004 Oct;22(5):371-5.
    PMID: 15560441
    The presence of ammoniacal nitrogen (N-NH3) in leachate is one of the problems normally faced by landfill operators. Slow leaching of wastes producing nitrogen and no significant mechanism for transformation of N-NH3 in the landfills causes a high concentration of ammoniacal nitrogen in leachate over a long period of time. A literature review showed that the removal of ammoniacal nitrogen from leachate was not well documented and to date, there were limited studies in Malaysia on this aspect, especially in adsorption treatment. The main objective of the present study was to investigate the suitability of activated carbon, limestone and a mixture of both materials as a filtering medium, in combination with other treatments capable of attenuating ammoniacal nitrogen which is present in significant quantity (between 429 and 1909 mg L(-1)) in one of the landfill sites in Malaysia. The results of the study show that about 40% of ammoniacal nitrogen with concentration of more than 1000 mg L(-1) could be removed either by activated carbon or a mixture of carbon with limestone at mixture ratio of 5:35. This result shows that limestone is potentially useful as a cost-effective medium to replace activated carbon for ammoniacal nitrogen removal at a considerably lower cost.
    Matched MeSH terms: Nitrogen/chemistry*
  16. Aziz HA, Puat NNA, Alazaiza MYD, Hung YT
    PMID: 30104522 DOI: 10.3390/ijerph15081734
    In this study, a sequential batch reactor (SBR) with different types of fibers was employed for the treatment of poultry slaughterhouse wastewater. Three types of fibers, namely, juite fiber (JF), bio-fringe fiber (BF), and siliconised conjugated polyester fiber (SCPF), were used. Four SBR experiments were conducted, using the fibers in different reactors, while the fourth reactor used a combination of these fibers. The treatment efficiency of the different reactors with and without fibers on biochemical oxygen demand (BOD), chemical oxygen demand (COD), ammonia-nitrogen (NH₃-N), phosphorus (P), nitrite (NO₂), nitrate (NO₃), total suspended solids (TSS), and oil-grease were evaluated. The removal efficiency for the reactors with fibers was higher than that of the reactor without fibers for all pollutants. The treated effluent had 40 mg/L BOD₅ and 45 mg/L COD with an average removal efficiency of 96% and 93%, respectively, which meet the discharge limits stated in the Environmental Quality Act in Malaysia.
    Matched MeSH terms: Nitrogen Dioxide
  17. Aziz SQ, Aziz HA, Yusoff MS, Bashir MJ, Umar M
    J Environ Manage, 2010 Dec;91(12):2608-14.
    PMID: 20739117 DOI: 10.1016/j.jenvman.2010.07.042
    This study analyzes and compares the results of leachate composition at the semi-aerobic Pulau Burung Landfill Site (PBLS) (unaerated pond and intermittently aerated pond) and the anaerobic Kulim Sanitary Landfill in the northern region of Malaysia. The raw samples were collected and analyzed for twenty parameters. The average values of the parameters such as phenols (1.2, 6.7, and 2.6 mg/L), total nitrogen (448, 1200, and 300 mg/L N-TN), ammonia-N (542, 1568, and 538 mg/L NH(3)-N), nitrite (91, 49, and 52 mg/L NO(2)(-)-N), total phosphorus (21, 17, and 19 mg/L), BOD(5) (83, 243, and 326 mg/L), COD (935, 2345, and 1892 mg/L), BOD(5)/COD (0.096,0.1124,0.205%), pH (8.20, 8.28, and 7.76), turbidity (1546, 180, and 1936 Formazin attenuation units (FAU)), and color (3334, 3347, and 4041 Pt Co) for leachate at the semi-aerobic PBLS (unaerated and intermittently aerated) and the anaerobic Kulim Sanitary Landfill were recorded, respectively. The obtained results were compared with previously published data and data from the Malaysia Environmental Quality Act 1974. The results indicated that Pulau Burung leachate was more stabilized compared with Kulim leachate. Furthermore, the aeration process in PBLS has a considerable effect on reducing the concentration of several pollutants. The studied leachate requires treatment to minimize the pollutants to an acceptable level prior to discharge into water courses.
    Matched MeSH terms: Nitrogen/analysis; Nitrogen Compounds/analysis
  18. Azizah Endut, Fathurrahman Lananan, Ahmad Jusoh, Wan Norsani Wan Nik, Nora'aini Ali
    MyJurnal
    The current and escalating extent of soil degradation, water scarcity and environmental concern
    plaguing agricultural productivity, demands re-assessing the direction of food production. Aquaponics
    is a concept relatively new to modern food production methods and can contribute to food security.
    This study was conducted to establish sustainable aquaculture systems that maximize benefits and
    minimize the accumulation of detrimental compounds and other types of negative impacts on both
    natural and social environments. This study carried out at an average inflow rate of 1.28 m/day to
    evaluate the operation of the aquaponics recirculation system (ARS) on nutrients removal and growth
    and yield of African catfish as well as water spinach. A special design of ARS was used to provide
    nitrification of fishery wastewater, where the combination of sands and gravels in hydroponics trough,
    providing both surfaces for biofuel development and cultivation area for plants. Removal efficiencies
    of 5-day biochemical oxygen demand (BOD5), total suspended solids (TSS), total ammonia nitrogen
    (TAN), nitrite-nitrogen (NO2-N), nitrate-nitrogen (NO3-N), and orthophosphate (PO4
    3-
    ) were 82%, 89%,
    93%, 94%, 81%, and 80%, respectively. The feed conversion ratio (FCR) and specific growth rate
    (SGR) of African catfish were 1.08 and 3.34% day-1
    , respectively. The average water spinach
    production was 3.56 kg per m2
    . This study showed that ARS is a method of producing crop along with
    a healthy protein source and among the best alternatives for achieving economic and environmental
    sustainability.
    Matched MeSH terms: Nitrogen
  19. Azmi SZ, Latif MT, Ismail AS, Juneng L, Jemain AA
    Air Qual Atmos Health, 2010 Mar;3(1):53-64.
    PMID: 20376168
    Over the last decades, the development of the Klang Valley (Malaysia), as an urban commercial and industrial area, has elevated the risk of atmospheric pollutions. There are several significant sources of air pollutants which vary depending on the background of the location they originate from. The aim of this study is to determine the trend and status of air quality and their correlation with the meteorological factors at different air quality monitoring stations in the Klang Valley. The data of five major air pollutants (PM(10), CO, SO(2), O(3), NO(2)) were recorded at the Alam Sekitar Sdn Bhd (ASMA) monitoring stations in the Klang Valley, namely Petaling Jaya (S1), Shah Alam (S2) and Gombak (S3). The data from these three stations were compared with the data recorded at Jerantut, Pahang (B), a background station established by the Malaysian Department of Environment. Results show that the concentrations of CO, NO(2) and SO(2) are higher at Petaling Jaya (S1) which is due to influence of heavy traffic. The concentrations of PM(10) and O(3,) however, are predominantly related to regional tropical factors, such as the influence of biomass burning and of ultra violet radiation from sunlight. They can, though, also be influenced by local sources. There are relatively stronger inter-pollutant correlations at the stations of Gombak and Shah Alam, and the results also suggest that heavy traffic flow induces high concentrations of PM(10), CO, NO(2) and SO(2) at the three sampling stations. Additionally, meteorological factors, particularly the ambient temperature and wind speed, may influence the concentration of PM(10) in the atmosphere.
    Matched MeSH terms: Nitrogen Dioxide
  20. Baghdadi A, Halim RA, Ghasemzadeh A, Ramlan MF, Sakimin SZ
    PeerJ, 2018;6:e5280.
    PMID: 30386686 DOI: 10.7717/peerj.5280
    Background: Corn silage is an important feed for intense ruminant production, but the growth of corn relies heavily on the use of chemical fertilizers. Sustainable crop production requires careful management of all nutrient sources available on a farm, particularly in corn-based cropping systems.

    Methods: Experiments were conducted to determine the appropriate technique of corn-legume intercropping in conjunction with the supplemental use of chemical fertilizers, organic manure, and biofertilizers (BFs). Acetylene reduction assays (ARAs) were also performed on corn and soybean roots.

    Results: Combining chemical fertilizers with chicken manure (CM) in a 50:50 ratio and applying 50% NPK+50% CM+BF produced fresh forage and dry matter (DM) yields that were similar to those produced in the 100% nitrogen (N), phosphorus (P), potassium (K) treatment. Among the lone fertilizer treatments, the inorganic fertilizer (100% NPK) treatment produced the highest DM yield (13.86 t/ha) of forage and outyielded the 100% CM (9.74 t/ha) treatment. However, when CM was combined with NPK, the resulting DM yield of forage (13.86 t/ha) was the same as that resulting from 100% NPK (13.68 t/ha). Compared with CM applications alone, combinations of NPK and CM applications resulted in increased plant height, crop growth rates (CGRs) and leaf area index (LAI), but the values of these parameters were similar to those resulting from 100% NPK application. Fertilizers in which the ratio was 50% CM+50% NPK or 50% CM+50% NPK+BF resulted in protein yields that were similar to those resulting from conventional fertilizers. Similarly, the CP content did not significantly differ between applications of the 100% NPK and 50% CM+50% NPK fertilizers. The use of BFs had no significant impact on improving either the yield or quality of forage fertilized with inorganic or organic fertilizer. Lactic acid responded differently to different fertilizer applications and was significantly higher in the fertilized plots than in the unfertilized plots. Compared with treatments of lone chemical and lone organic manure fertilizers, treatments involving applications of BF and a combination of BF and NPK or CM resulted in higher ARA values.

    Discussion: There is no simple and easy approach to increase biological nitrogen fixation (BNF) in grain legumes grown as part of a cropping system under realistic farm field conditions. Overall, evidence recorded from this study proves that, compared with corn monocrops combined with CM and chemical fertilizers, corn-soybean intercrops could increase forage yields and quality, produce higher total protein yields, and reduce the need for protein supplements and chemical fertilizers.

    Matched MeSH terms: Nitrogen; Nitrogen Fixation
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links