Displaying publications 61 - 80 of 451 in total

Abstract:
Sort:
  1. Hassan N, Ahmad T, Ashaari A, Awang SR, Mamat SS, Wan Mohamad WM, et al.
    Results Phys, 2021 Jun;25:104267.
    PMID: 33968605 DOI: 10.1016/j.rinp.2021.104267
    Complex systems require rigorous analysis using effective method, in order to handle and interpret their information. Spectrum produced from Fourier transform infrared (FTIR) instrument is an example of a complex system, due to their overlapped bands and interactions within the spectrum. Thus, chemometrics techniques are required to further analyze the data, in particular, chemometrics fuzzy autocatalytic set (c-FACS). The c-FACS is initially used to analyze the FTIR spectra of gelatins. However, in this study, the c-FACS is generalized and implemented for analysis of Coronavirus disease 2019 (Covid-19), particularly, the pandemic outbreak in Malaysia. The daily Covid-19 cases in states in Malaysia are modeled and analyzed using c-FACS, to observe the trend and severity of the disease in Malaysia. As a result, the classification of severity of zones in Malaysia are identified. The obtained results offer descriptive insight for strategizing purposes in combating the Covid-19 outbreak in Malaysia.
    Matched MeSH terms: Research Design
  2. Tarusan SAA, Jidin A, Jamil MLM
    ISA Trans, 2021 Apr 16.
    PMID: 33931170 DOI: 10.1016/j.isatra.2021.04.005
    Direct Torque Control (DTC) scheme introduces a robust and simple control of electrical drive. However, its shortcomings such as broad torque ripple and variable switching frequency have offered several improvements like Space Vector Modulation (SVM) strategy, multilevel inverter (MLI) topology, etc. The conventional DTC which is fed by the two-level inverter has limited voltage vector, results in some difficulties to optimize the operation, especially at low operating speed. In contrast to MLI, the abundant of voltage vector has provided various amplitudes and angles that can overcome the problem of conventional DTC. Thus, this paper introduces the selected optimal voltage vector obtained from five-level Cascaded H-Bridge (CHB) inverter that employs in DTC hysteresis-based to achieve better optimization that similar to the DTC-SVM. Initially, the research work begins with an investigation on the performance comparison between a DTC hysteresis-based between two-level inverter (conventional method) and a five-level CHB inverter (proposed method). Here, a DC generator acted as a load is employed to control the operating speed instead of the speed controller (speed controller is negligible). Hence, the DTC method is optimized by minimizing the torque ripple as well as retaining the torque control capability at constant torque region on several operating speed. The selected optimal vector from the look-up table DTC of five-level CHB inverter must be dynamically appropriate to any change of torque (increased or decreased torque). For simplicity, this paper will only discuss the experimental results for both topologies of drive system. From the experimental results, it is verified that the torque ripples by the proposed method have achieved 10% and 50% reduction at high and low operating speed respectively. It is found that the DTC hysteresis-based result simpler control method than DTC-SVM while maintaining similar output performance.
    Matched MeSH terms: Research Design
  3. Safitri E, Humaira H, Murniana M, Nazaruddin N, Iqhrammullah M, Md Sani ND, et al.
    Polymers (Basel), 2021 Apr 14;13(8).
    PMID: 33919956 DOI: 10.3390/polym13081276
    A simple optical pH sensor based on immobilization, Dioscorea alata L. anthocyanin methanol extract, onto a pectin-chitosan polyelectrolyte complex (pectin-chitosan PEC), has been successfully fabricated. The optical pH sensor was manufactured as a membrane made of pectin-chitosan PEC and the extracted anthocyanin. This sensor has the highest sensitivity of anthocyanin content at 0.025 mg/L in phosphate buffer and 0.0375 mg/L in citrate buffer. It also has good reproducibility with a relative standard deviation (%RSD) of 7.7%, and gives a stable response at time values greater than 5 min from exposure in a buffer solution, and the sensor can be utilized within five days from its synthesis. This optical pH sensor has been employed to determine saliva pH of people of different ages and showed no significant difference when compared to a potentiometric method.
    Matched MeSH terms: Research Design
  4. Chong BW, Othman R, Putra Jaya R, Mohd Hasan MR, Sandu AV, Nabiałek M, et al.
    Materials (Basel), 2021 Apr 09;14(8).
    PMID: 33918757 DOI: 10.3390/ma14081866
    Concrete mix design and the determination of concrete performance are not merely engineering studies, but also mathematical and statistical endeavors. The study of concrete mechanical properties involves a myriad of factors, including, but not limited to, the amount of each constituent material and its proportion, the type and dosage of chemical additives, and the inclusion of different waste materials. The number of factors and combinations make it difficult, or outright impossible, to formulate an expression of concrete performance through sheer experimentation. Hence, design of experiment has become a part of studies, involving concrete with material addition or replacement. This paper reviewed common design of experimental methods, implemented by past studies, which looked into the analysis of concrete performance. Several analysis methods were employed to optimize data collection and data analysis, such as analysis of variance (ANOVA), regression, Taguchi method, Response Surface Methodology, and Artificial Neural Network. It can be concluded that the use of statistical analysis is helpful for concrete material research, and all the reviewed designs of experimental methods are helpful in simplifying the work and saving time, while providing accurate prediction of concrete mechanical performance.
    Matched MeSH terms: Research Design
  5. Sadaghiani MS, Arami-Niya A, Zhang D, Tsuji T, Tanaka Y, Seiki Y, et al.
    J Hazard Mater, 2021 04 05;407:124781.
    PMID: 33412363 DOI: 10.1016/j.jhazmat.2020.124781
    Given the safety issues associated with flammability characteristics of alternative environmentally-friendly refrigerants, it is vital to establish measurement systems to accurately analyse the flammability of these mildly flammable refrigerants. In this study, we used a customised Hartmann bomb analogue to measure the minimum ignition energy (MIE) and laminar burning velocity (BV) for refrigerant/air mixtures of pure ammonia (R717), R32, R1234yf and mixtures of R32 and R1234yf with non-flammable refrigerants of R134a, R125 and carbon dioxide (R744). The MIEs of R717, R32, and R1234yf were measured at an ambient temperature of 24 °C to be (18.0 ± 1.4), (8.0 ± 1.5) and (510 ± 130) mJ at equivalence ratios of 0.9, 1.27 and 1.33, respectively. Adding the non-flammable refrigerants R134a, R125 and R744 along with R32 at volumetric concentrations of 5% each to R1234yf reduced the latter compound's flammability and increased its MIE by one order of magnitude. The laminar burning velocities of pure R717 and R32 were measured at an equivalence ratio of 1.1 using the flat flame method and found to be 8.4 and 7.4 cm/s, respectively. Adding 5% R1234yf to R32 decreased the laminar burning velocity by 11%, while a further 5% addition of R1234yf resulted in a decrease of over 30% in the laminar burning velocity.
    Matched MeSH terms: Research Design
  6. Amir NN, Kamaruzzaman SB, Effendi-Tenang I, Jamaluddin M, Tan MP, Ramli N, et al.
    Eur Geriatr Med, 2021 Apr;12(2):313-319.
    PMID: 33486745 DOI: 10.1007/s41999-021-00450-2
    PURPOSE: Using data from the Malaysian Elders Longitudinal Research (MELoR), this study investigated the association between visual function (visual acuity and contrast sensitivity) and frailty in a group of urban-dwelling older adults.

    METHODS: This was a cross-sectional study. 1332 participants aged ≥ 55 years were selected by random sampling from the parliamentary electoral register. Only 1274 participants completed the frailty assessment and 1278 participants completed the contrast sensitivity assessment. Impaired vision was defined as a Snellen visual acuity of worse than 6/12 in the better eye. Poor contrast sensitivity was defined as a score on the Pelli Robson chart of lower than 1.65. Frailty was defined with the Fried's phenotype criteria. Inter-group comparisons were determined with the independent T-test for continuous variables and the Pearson's Chi-squared test for categorical variables. The odds ratio (OR) with 95% confidence interval (CI) was used to evaluate the cross-sectional association between frailty and visual function.

    RESULTS: The mean age of participants was 68.8 ± 7.5 years, of which 58.1% (774) were women. Impaired vision and poor contrast sensitivity were present in 187 (14%) and 271 (21.2%) subjects respectively. 73 (5.8%) individuals were classified as frail, 1161 (91.0.%) pre-frail, and 40 (2.8%) non-frail. There was no significant difference in frailty phenotypes between those with good and impaired vision (p = 0.241). Fried's component of handgrip strength, gait speed and exhaustion were significantly better in those with good visual function (p 

    Matched MeSH terms: Research Design
  7. Ahmad Hazmi AS, Abd Maurad Z, Mohd Noor MA, Nek Mat Din NSM, Idris Z
    J Sep Sci, 2021 Apr;44(7):1471-1481.
    PMID: 33522105 DOI: 10.1002/jssc.202000929
    Ethylene glycol is a super commodity chemical and it has vital roles in various applications. Its co-production with other chemicals, such as ethylene carbonate and glycerol carbonate, has promised cheaper production cost. Its quantification presents a challenge as its contaminants, such as ethylene carbonate, produce a signal-reducing effect in flame ionized detector. The aim of this study is to evaluate external standard to quantify the composition of glycol mixture. Measurement system analysis was employed on the external standard method. Reliability of the external standard is statistically significant with low p-values, excellent capability indices, and high F-values. The external standard is found to have remarkable precision and trueness as both capability indices are mirroring each other. Furthermore, the capability analysis has a strong correlation with quality measurement. Based on capability indices, the limit of detection is recommended at S/N = 25 and the limit of quantification is recommended at S/N = 100 for a reliable measurement. A high degree of reliability is achieved coherently as almost all uncertainties of coefficients of variations are less than 5%. The established method was validated and successfully applied to glycol mixture at azeotropic distillation pilot plant.
    Matched MeSH terms: Research Design
  8. Woon YH, Suhaini SA
    Data Brief, 2021 Apr;35:106501.
    PMID: 33997187 DOI: 10.1016/j.dib.2020.106501
    A caesarean section (CS) is a common birth delivery mode, which involves delivery of the baby through a surgical incision on the mother's abdomen and uterus. This article presents a survey dataset on the perception and response of women about the CS. This survey employed a quantitative research design. The data were collected by means of a face to face questionnaire. Majority of the respondents are in the age range of 31 - 40 years old. The findings indicate that the respondents mainly refer to the internet to obtain information about the birth delivery mode that helped the respondents to decide on their mode of preference. This is followed by obstetrician/midwife and friends. Various statements were used to determine the perception of respondents towards CS.
    Matched MeSH terms: Research Design
  9. Spreafico A, Hansen AR, Abdul Razak AR, Bedard PL, Siu LL
    Cancer Discov, 2021 Apr;11(4):822-837.
    PMID: 33811119 DOI: 10.1158/2159-8290.CD-20-1301
    Clinical trials represent a fulcrum for oncology drug discovery and development to bring safe and effective medicines to patients in a timely manner. Clinical trials have shifted from traditional studies evaluating cytotoxic chemotherapy in largely histology-based populations to become adaptively designed and biomarker-driven evaluations of molecularly targeted agents and immune therapies in selected patient subsets. This review will discuss the scientific, methodological, practical, and patient-focused considerations to transform clinical trials. A call to action is proposed to establish the framework for next-generation clinical trials that strikes an optimal balance of operational efficiency, scientific impact, and value to patients. SIGNIFICANCE: The future of cancer clinical trials requires a framework that can efficiently transform scientific discoveries to clinical utility through applications of innovative technologies and dynamic design methodologies. Next-generation clinical trials will offer individualized strategies which ultimately contribute to globalized knowledge and collective learning, through the joint efforts of all key stakeholders including investigators and patients.
    Matched MeSH terms: Research Design/trends*
  10. Bujang MA
    Malays J Med Sci, 2021 Apr;28(2):15-27.
    PMID: 33958957 DOI: 10.21315/mjms2021.28.2.2
    Determination of a minimum sample size required for a study is a major consideration which all researchers are confronted with at the early stage of developing a research protocol. This is because the researcher will need to have a sound prerequisite knowledge of inferential statistics in order to enable him/her to acquire a thorough understanding of the overall concept of a minimum sample size requirement and its estimation. Besides type I error and power of the study, some estimates for effect sizes will also need to be determined in the process to calculate or estimate the sample size. The appropriateness in calculating or estimating the sample size will enable the researchers to better plan their study especially pertaining to recruitment of subjects. To facilitate a researcher in estimating the appropriate sample size for their study, this article provides some recommendations for researchers on how to determine the appropriate sample size for their studies. In addition, several issues related to sample size determination were also discussed.
    Matched MeSH terms: Research Design
  11. Yap CC, Mohamad Som RB, Sum XY, Tan SA, Yee KW
    Psychol Rep, 2021 Mar 31.
    PMID: 33789536 DOI: 10.1177/00332941211005124
    Adolescence is the developmental process of becoming an adult. This journey of physical and psychological maturation is filled with challenges and hormonal chaos, and teenagers experience unhappiness at times. From a psychological perspective, this study aimed to examine the association between motivation, self-esteem and happiness; and to explore the mediating role of motivation in the association between self-esteem and happiness among adolescents in Malaysia. 480 secondary school students were recruited using a multistage cluster sampling method and answered the Malay versions of the Subjective Happiness, Brief Motivation and Rosenberg Self-esteem scales. Both self-esteem and motivation were found positively correlated to happiness. The hypothetical mediating role of motivation on the association between self-esteem and happiness was also supported, indicating that individuals with higher self-esteem have higher motivation which may result in greater happiness. Since the direct association between self-esteem and happiness remained significant, a partial mediation of adolescents' motivation between self-esteem and happiness is indicated. The results showed that perceived self-esteem plays a role in predicting happiness and the presence of motivation enhances happiness, providing an insight to nurture happier adolescents for parents and educators in Malaysia.
    Matched MeSH terms: Research Design
  12. Manurung S, Setyowati S
    Malays Fam Physician, 2021 Mar 25;16(1):64-74.
    PMID: 33948144 DOI: 10.51866/oa1037
    Background: Postpartum blues in Indonesia has a high prevalence at 37% to 67%. Postpartum blues syndrome has been described as varying changes in the affective domain, such as feelings, behavior, or thoughts, that can be influenced by the roles and tasks of women, along with their social, cultural, and economic support. Instruments that measure maternal blues through bonding attachment behavior have never before been developed in Indonesia.

    Objective: This study aimed to develop a maternal blues scale through bonding attachments to predict postpartum blues.

    Method: The research design consisted of three stages: 1) phenomenology design and focus group discussion; 2) development and construction of the maternal blues scale, and 3) a cross-sectional study to measure validation of the scales. Respondents were postpartum mothers in the first week after birth. The sample comprised 501 participants. Sampling was done by consecutive sampling at the Public Health Center (PUSKESMAS) in the South Jakarta area. Data analysis used exploratory factor analysis (EFA) and confirmatory factor analysis (CFA), correlation, and a diagnostic testing .

    Results: Item analysis produced 32 items consisting of 24 items regarding the mother's role and duties as internal factors and eight factors involving social, cultural, and economic support as external factors. Both factors were valid and reliable in predicting postpartum blues with indicators (t loading factors ≥ 1.96, standardized loading factor (SLF) ≥.50, internal factors: construct reliability (CR) ≥ .70 and extraction variants (VE) ≥ .50 and external factors: CR ≥ .74 to .83 VE ≥ .50 to .63). The relationship with Kennerley's maternity blues as a gold standard was significant. Internal factors had a score of 53, with a sensitivity of 60.2%. The external factors score was 19, with a sensitivity of 77.3%.

    Conclusion: The new scale for postpartum blues prediction developed displayed internal consistency and validity of each indicator (internal and external factors) that was good (CR ≥ .70; VE ≥ .50). This scale provides a feasible tool to predict postpartum blues.

    Matched MeSH terms: Research Design
  13. Kow CS, Aldeyab M, Hasan SS
    Eur J Clin Pharmacol, 2021 Mar;77(3):435-437.
    PMID: 33011825 DOI: 10.1007/s00228-020-03008-6
    Matched MeSH terms: Research Design/standards*
  14. Yusof ZYM, Anwar NH, Mohd Nor NA, Nor MM, Mustafa SE
    Trials, 2021 Feb 22;22(1):156.
    PMID: 33618735 DOI: 10.1186/s13063-021-05111-0
    BACKGROUND: Despite the implementation of the preschool oral healthcare programme (POHP) for 5-6-year-old children over the past 3 decades in Malaysia, dental plaque and caries levels in this age group remain high. Among the child-level attributable factors are unhealthy self-care behaviours (poor oral hygiene and high sugary diet). In order to improve the children's oral health, an improved programme called the 'Senyuman Indah Milik Semua' Programme (SIMSP) or 'Beautiful Smile for All' programme is introduced. In this programme, a triad of dental hygienist-teacher-parent works together to improve children's oral hygiene levels compared with the existing POHP that involves dental hygienists only. The aim of this study is to compare the effect of the SIMSP versus the existing POHP on oral hygiene levels of 5-6-year-old children in the Kampar district, Perak state, Malaysia.

    METHODS: This study is a pragmatic, cluster-randomised, parallel-group, matched pair, controlled trial with blinded outcome assessment. Randomisation is performed using a computer-generated table with a 1:1 allocation comparing the SIMSP and the POHP involving 28 preschools in the Kampar district, Perak, Malaysia. The intervention consists of preschool visits by a group of dental therapists, in-class oral health lessons and daily toothbrushing conducted by class teacher, child home toothbrushing supervised by parents, and infographic oral health messages to parents. The control consists of the existing POHP that involves preschool visits by a group of dental therapists only. The trial lasts for 6 months. Primary outcome variable is the mean plaque score change after 6 months. To determine the feasibility of the SIMSP, a process evaluation will be conducted using the perspectives of dental therapists, teachers, and parents on the appropriateness, effectiveness, facilitators, and barriers to the SIMSP implementation as well as an audit trail to assess the trial intervention.

    DISCUSSION: Cluster randomisation may lead to a random effect and cluster selection bias. These factors will be accounted for when analysing the data and interpreting the outcomes. The effectiveness of the SIMSP will be evaluated by comparing the results with those of the POHP.

    TRIAL REGISTRATION: ClinicalTrials.gov NCT04339647 . Registered on 5 April 2020 - Retrospectively registered.

    Matched MeSH terms: Research Design
  15. Zhao Y, Rokhani FZ, Shariff Ghazali S, Chew BH
    BMJ Open, 2021 02 18;11(2):e041452.
    PMID: 33602703 DOI: 10.1136/bmjopen-2020-041452
    INTRODUCTION: Smart technologies, digital health and eHealth have been shown to enhance institutional elderly care. Because of the rapidly ageing societies, information technologies in geriatric healthcare are urgently needed. A lot of innovation in smart healthcare has occurred in the past decade, and its use in nursing care assessment, daily living activities and service management is yet to be defined. More fundamentally, the concepts, definitions and scopes of a smart nursing home are still vague. Thus, this scoping review aims to examine the extent, range (variety) and nature (characteristics) of evidence on the existing smart concepts and feasible healthcare technologies, types of medical services in nursing home settings and acceptability of a smart nursing home by the elderly people ≥60 years old, their caregivers, nursing home operators and government agencies.

    METHODS AND ANALYSIS: This scoping review will be guided by the smart technology adoption behaviours of elder consumers theoretical model (Elderadopt) by Golant and reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses for Scoping Reviews. First, we will conduct an internet search for nursing homes and websites and databases related to the stakeholders to retrieve the definitions, concepts and criteria of a smart nursing home (phase 1). Second, we will conduct an additional systematic electronic database search for published articles on any measures of technological feasibility and integration of medical services in nursing home settings and their acceptability by nursing home residents and caregivers (phase 2). The electronic database search will be carried out from 1999 to 30 September 2020 and limited to works published in English and Chinese languages. For phase 2, the selection of literature is further limited to residents of nursing homes aged ≥60 years old with or without medical needs but are not terminally ill or bed-bound. Qualitative data analysis will follow the Framework Methods and thematic analysis using combined inductive and deductive approaches, conducted by at least two reviewers.

    ETHICS AND DISSEMINATION: This protocol is registered on osf.io (URL: https://osf.io/qtwz2/). Ethical approval is not necessary as the scoping review is not a primary study, and the information is collected from selected articles that are publicly available sources. All findings will be disseminated at conferences and published in peer-reviewed journals.

    Matched MeSH terms: Research Design
  16. Nguyen VH, Nguyen BD, Pham HT, Lam SS, Vo DN, Shokouhimehr M, et al.
    Sci Rep, 2021 Feb 11;11(1):3641.
    PMID: 33574397 DOI: 10.1038/s41598-020-80886-x
    In this work, we proposed a facile approach to fabricate a superhydrophobic surface for anti-icing performance in terms of adhesive strength and freezing time. A hierarchical structure was generated on as-received Al plates using a wet etching method and followed with a low energy chemical compound coating. Surfaces after treatment exhibited the great water repellent properties with a high contact angle and extremely low sliding angle. An anti-icing investigation was carried out by using a custom-built apparatus and demonstrated the expected low adhesion and freezing time for icephobic applications. In addition, we proposed a model for calculating the freezing time. The experimented results were compared with theoretical calculation and demonstrated the good agreement, illustrating the importance of theoretical contribution in design icephobic surfaces. Therefore, this study provides a guideline for the understanding of icing phenomena and designing of icephobic surfaces.
    Matched MeSH terms: Research Design
  17. Rashidi NA, Yusup S
    J Hazard Mater, 2021 02 05;403:123876.
    PMID: 33264948 DOI: 10.1016/j.jhazmat.2020.123876
    In this study, a binary mixture of petroleum coke and palm kernel shell had been investigated as potential starting materials for activated carbon production. Single-stage potassium carbonate (K2CO3) activation under nitrogen (N2) atmosphere was adopted in this research study. Effect of several operating parameters that included the impregnation ratio (1-3 wt./wt.), activation temperature (600-800 °C), and dwell time (1-2 hrs) were analyzed by using the Box-Behnken experimental design. Influence of these parameters towards activated carbon yield (Y1) and carbon dioxide (CO2) adsorption capacity at an atmospheric condition (Y2) were investigated. The optimum conditions for the activated carbon production were attained at impregnation ratio of 1.75:1, activation temperature of 680 °C, and dwell time of 1 h, with its corresponding Y1 and Y2 is 56.2 wt.% and 2.3991 mmol/g, respectively. Physicochemical properties of the pristine materials and synthesized activated carbon at the optimum conditions were analyzed in terms of their decomposition behavior, surface morphology, elemental composition, and textural characteristics. The study revealed that the blend of petroleum coke and palm kernel shell can be effectively used as the activated carbon precursors, and the experimental findings demonstrated comparable CO2 adsorption performance with commercial activated carbon as well as that in literatures.
    Matched MeSH terms: Research Design
  18. Charoenkwan P, Chiangjong W, Lee VS, Nantasenamat C, Hasan MM, Shoombuatong W
    Sci Rep, 2021 Feb 04;11(1):3017.
    PMID: 33542286 DOI: 10.1038/s41598-021-82513-9
    As anticancer peptides (ACPs) have attracted great interest for cancer treatment, several approaches based on machine learning have been proposed for ACP identification. Although existing methods have afforded high prediction accuracies, however such models are using a large number of descriptors together with complex ensemble approaches that consequently leads to low interpretability and thus poses a challenge for biologists and biochemists. Therefore, it is desirable to develop a simple, interpretable and efficient predictor for accurate ACP identification as well as providing the means for the rational design of new anticancer peptides with promising potential for clinical application. Herein, we propose a novel flexible scoring card method (FSCM) making use of propensity scores of local and global sequential information for the development of a sequence-based ACP predictor (named iACP-FSCM) for improving the prediction accuracy and model interpretability. To the best of our knowledge, iACP-FSCM represents the first sequence-based ACP predictor for rationalizing an in-depth understanding into the molecular basis for the enhancement of anticancer activities of peptides via the use of FSCM-derived propensity scores. The independent testing results showed that the iACP-FSCM provided accuracies of 0.825 and 0.910 as evaluated on the main and alternative datasets, respectively. Results from comparative benchmarking demonstrated that iACP-FSCM could outperform seven other existing ACP predictors with marked improvements of 7% and 17% for accuracy and MCC, respectively, on the main dataset. Furthermore, the iACP-FSCM (0.910) achieved very comparable results to that of the state-of-the-art ensemble model AntiCP2.0 (0.920) as evaluated on the alternative dataset. Comparative results demonstrated that iACP-FSCM was the most suitable choice for ACP identification and characterization considering its simplicity, interpretability and generalizability. It is highly anticipated that the iACP-FSCM may be a robust tool for the rapid screening and identification of promising ACPs for clinical use.
    Matched MeSH terms: Research Design*
  19. Olujobi OJ
    Heliyon, 2021 Feb;7(2):e06123.
    PMID: 33659729 DOI: 10.1016/j.heliyon.2021.e06123
    Insolvency and business recovery laws in Nigeria have not evolved to incorporate reorganisation, reforming insolvent oil firms' operations to boost commercial oil firms' steadiness and economic suitability like other moderately developed countries. In Nigeria, liquidation is understood by many as the panacea to indebtedness. The research evaluates the Nigerian insolvency and business recovery legal regime to sustain indebted oil firms from economic shocks due to the global decline in the oil price to avert imminent business failures due to insufficient cash flows. The aim is to fill the gaps in Nigeria's insolvency and business recovery laws by recommending a model for the sustenance of oil firms and to suggest the reform of the gaps identified in the existing laws and the extant literature on the subject. The paper opted for conceptual legal review, comparative legal and policies analyses of solvency and business recovery legislations in Nigeria, Malaysia, India, South Africa, the United Kingdom and the United States. These nations were designated for this study because their insolvency and business recovery legal regime are business rescued driven, not winding up centred. The study is library research-based to address some of the flaws in Nigeria's insolvency and business recovery laws. The study finds that Nigerian legislation on insolvency is flawed in oil firms' salvage, improvement and rearrangement. It ends that, statutory bodies in the designated case study nations are efficient than those in Nigeria due to the strong political will of their governments in supporting insolvent oil firms for successful financial recovery, to safeguard jobs, to protect creditors and to enhance the wealth of their nations through sound business recovery policies and laws. The study, advocates, remodel of Nigeria's insolvency and business recovery legislations and policies in compliance with the international standards on insolvent oil firms salvaged and creditors focused policies for a robust economy. The study concludes with the recommendation for further study to consider quantitative analysis research methodology to project further scholarship on the subject.
    Matched MeSH terms: Research Design
  20. Siburian R, Ali AMM, Sebayang K, Supeno M, Tarigan K, Simanjuntak C, et al.
    Sci Rep, 2021 Jan 28;11(1):2532.
    PMID: 33510232 DOI: 10.1038/s41598-020-80472-1
    In this paper, we report about chemically interaction between Pt Subnano-Clusters on Graphene Nano Sheets (GNS). The aim of this research is to clarify the size effect of Pt clusters on Pt 1-7 wt.%/GNS. This research is an experimental laboratory research. GNS was synthesized by using modified Hummer's method and 1-7 wt.% Pt/GNS were prepared with impregnation method. Then, they were analyzed with TG/DTA, XRD, TEM and XPS, respectively. The results show that Pt clusters are well deposited on GNS (TG/DTA and TEM data). Those data also are consistent with XRD data. The weak and broad peaks appear at 2θ = 39°, indicating Pt metal exists on GNS. The state of Pt is confirmed by using XPS. The appearance of Pt 4f. peaks proves that Pt metal is chemical interaction on GNS. The size of Pt clusters may affect the chemically properties of Pt/GNS catalysts.
    Matched MeSH terms: Research Design
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links