Displaying publications 61 - 80 of 839 in total

Abstract:
Sort:
  1. Wardell JL, Jotani MM, Tiekink ERT
    Acta Crystallogr E Crystallogr Commun, 2017 Apr 01;73(Pt 4):579-585.
    PMID: 28435725 DOI: 10.1107/S2056989017004352
    In the anion of the title salt hydrate, H5N2(+)·C7H5N2O4(-)·2H2O, the carboxyl-ate and nitro groups lie out of the plane of the benzene ring to which they are bound [dihedral angles = 18.80 (10) and 8.04 (9)°, respectively], and as these groups are conrotatory, the dihedral angle between them is 26.73 (15)°. An intra-molecular amino-N-H⋯O(carboxyl-ate) hydrogen bond is noted. The main feature of the crystal packing is the formation of a supra-molecular chain along the b axis, with a zigzag topology, sustained by charge-assisted water-O-H⋯O(carboxyl-ate) hydrogen bonds and comprising alternating twelve-membered {⋯OCO⋯HOH}2 and eight-membered {⋯O⋯HOH}2 synthons. Each ammonium-N-H atom forms a charge-assisted hydrogen bond to a water mol-ecule and, in addition, one of these forms a hydrogen bond with a nitro-O atom. The amine-N-H atoms form hydrogen bonds to carboxyl-ate-O and water-O atoms, and the amine N atom accepts a hydrogen bond from an amino-H atom. The hydrogen bonds lead to a three-dimensional architecture. An analysis of the Hirshfeld surface highlights the major contribution of O⋯H/H⋯O hydrogen bonding to the overall surface, i.e. 46.8%, compared with H⋯H contacts (32.4%).
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  2. Wang Z, Li P, Ma K, Chen Y, Yan Z, Penfold J, et al.
    J Colloid Interface Sci, 2021 Mar 15;586:876-890.
    PMID: 33309145 DOI: 10.1016/j.jcis.2020.10.122
    HYPOTHESIS: The α-sulfo alkyl ester, AES, surfactants are a class of anionic surfactants which have potential for improved sustainable performance in a range of applications, and an important feature is their enhanced tolerance to precipitation in the presence of multivalent counterions. It is proposed that their adsorption properties can be adjusted substantially by changing the length of the shorter alkyl chain, that of the alkanol group in the ester.

    EXPERIMENTS: Surface tension and neutron reflectivity have been used to investigate the variation in the adsorption properties with the shorter alkyl chain length (methyl, ethyl and propyl), the impact of NaCl on the adsorption, the tendency to form surface multilayer structures in the presence of AlCl3, and the effects of mixing the methyl ester sulfonate with the ethyl and propyl ester sulfonates on the adsorption.

    FINDINGS: The variations in the critical micelle concentration, CMC, the adsorption isotherms, the saturation adsorption values, and the impact of NaCl illustrate the subtle influence of varying the shorter alkyl chain length of the surfactant. The non-ideal mixing of pairs of AES surfactants with different alkanol group lengths of the ester show that the extent of the non-ideality changes as the difference in the alkanol length increases. The surface multilayer formation observed in the presence of AlCl3 varies in a complex manner with the length of the short chain and for mixtures of surfactants with different chains lengths.

    Matched MeSH terms: Sodium Chloride
  3. Wang Z, Li P, Ma K, Chen Y, Campana M, Penfold J, et al.
    J Colloid Interface Sci, 2019 May 15;544:293-302.
    PMID: 30861434 DOI: 10.1016/j.jcis.2019.03.011
    The transition from monolayer to multilayer adsorption at the air-water interface in the presence of multivalent counterions has been demonstrated for a limited range of anionic surfactants which exhibit increased tolerance to precipitation in the presence of multivalent counterions. Understanding the role of molecular structure in determining the transition to surface ordering is an important aspect of the phenomenon. The focus of the paper is on the alkyl ester sulfonate, AES, surfactants; a promising group of anionic surfactants, with the potential for improved performance and biocompatibility. Neutron reflectivity measurements were made in aqueous solution and in the presence of NaCl, CaCl2, MgCl2 and AlCl3, for a range of alkyl ester sulfonate surfactants, in which the headgroup and alkyl chain geometries were manipulated. In the regions of monolayer adsorption changing the AES headgroup and alkyl chain geometries results in an increased saturation adsorption and in a more gradual decrease in the adsorption at low concentrations, consistent with a greater adsorption efficiency. Changing the AES headgroup and alkyl chain geometries also results in changes in the transition from monolayer adsorption to more ordered surface structures with the addition of AlCl3 and mixed multivalent electrolytes. A more limited surface layering is observed for the ethyl ester sulfonate, EES, with a C14 alkyl chain. Replacing the C14 alkyl chain with a C18 isostearic chain results in only monolayer adsorption. The results demonstrate the role and importance of the surfactant molecular structure in determining the nature of the surface adsorption in the presence of different electrolytes, and in the tendency to form extended surface multilayer structures.
    Matched MeSH terms: Sodium Chloride
  4. Wang J, Li C, Awasthi MK, Nyambura SM, Zhu Z, Li H, et al.
    J Environ Manage, 2024 Feb 27;353:120182.
    PMID: 38278112 DOI: 10.1016/j.jenvman.2024.120182
    Randomly collected food waste results in inaccurate experimental data with poor reproducibility for composting. This study investigated standard food waste samples as replacements for randomly collected food waste. A response surface methodology was utilised to analyse data from a 28-day compost process optimisation experiment using collected food waste, and the optimal combination of composting parameters was derived. Experiments using different standard food waste samples (high oil and salt, high oil and sugar, balanced diet, and vegetarian) were conducted for 28 days under optimal conditions. The ranking of differences between the standard samples and collected food waste was vegetarian > balanced diet > high oil and sugar > high oil and salt. Statistical analysis indicated t-tests for increased oil and salt samples and collected food waste were not significant, and Cohen's d effect values were minimal. High oil and salt samples can be used as replacements for collected food waste in composting experiments.
    Matched MeSH terms: Sodium Chloride
  5. Wan Rosli WD, Law KN, Zainuddin Z, Asro R
    Bioresour Technol, 2004 Jul;93(3):233-40.
    PMID: 15062817
    Caustic pulping of oil-palm frond-fiber strands was conducted following a central composite design using a two-level factorial plan involving three pulping variables (temperature: 160-180 degrees C, time: 1-2 h, alkali charge: 20-30% NaOH). Responses of pulp properties to the process variables were analyzed using a statistical software (DESIGN-EXPERT). The results indicated that frond-fiber strands could be pulped with ease to about 35-45% yield. Statistically, the reaction time was not a significant factor while the influences of the treatment temperature and caustic charge were in general significantly relative to the properties of the resultant pulps.
    Matched MeSH terms: Sodium Hydroxide/chemistry
  6. Wan Ngah WS, Hanafiah MA
    J Environ Sci (China), 2008;20(10):1168-76.
    PMID: 19143339
    The efficiency of sodium hydroxide treated rubber (Hevea brasiliensis) leaves powder (NHBL) for removing copper ions from aqueous solutions has been investigated. The effects of physicochemical parameters on biosorption capacities such as stirring speed, pH, biosorbent dose, initial concentrations of copper, and ionic strength were studied. The biosorption capacities of NHBL increased with increase in pH, stirring speed and copper concentration but decreased with increase in biosorbent dose and ionic strength. The isotherm study indicated that NHBL fitted well with Langmuir model compared to Freundlich and Dubinin-Radushkevich models. The maximum biosorption capacity determined from Langmuir isotherm was 14.97 mg/g at 27 degrees C. The kinetic study revealed that pseudosecond order model fitted well the kinetic data, while Boyd kinetic model indicated that film diffusion was the main rate determining step in biosorption process. Based on surface area analysis, NHBL has low surface area and categorized as macroporous. Fourier transform infrared (FT-IR) analyses revealed that hydroxyl, carboxyl, and amino are the main functional groups involved in the binding of copper ions. Complexation was one of the main mechanisms for the removal of copper ions as indicated by FT-IR spectra. Ion exchange was another possible mechanism since the ratio of adsorbed cations (Cu2+ and H+) to the released cations (Na+, Ca2+, and Mg2+) from NHBL was almost unity. Copper ions bound on NHBL were able to be desorbed at > 99% using 0.05 mol/L HCl, 0.01 mol/L HNO3, and 0.01 mol/L EDTA solutions.
    Matched MeSH terms: Sodium Hydroxide/metabolism*
  7. Wan Ibrahim WA, Arsad SR, Maarof H, Sanagi MM, Aboul-Enein HY
    Chirality, 2015 Mar;27(3):223-7.
    PMID: 25523071 DOI: 10.1002/chir.22416
    This work aimed to develop a chiral separation method of ketoconazole enantiomers using electrokinetic chromatography. The separation was achieved using heptakis (2, 3, 6-tri-O-methyl)-β-cyclodextrin (TMβCD), a commonly used chiral selector (CS), as it is relatively inexpensive and has a low UV absorbance in addition to an anionic surfactant, sodium dodecyl sulfate (SDS). The influence of TMβCD concentration, phosphate buffer concentration, SDS concentration, buffer pH, and applied voltage were investigated. The optimum conditions for chiral separation of ketoconazole was achieved using 10 mM phosphate buffer at pH 2.5 containing 20 mM TMβCD, 5 mM SDS, and 1.0% (v/v) methanol with an applied voltage of 25 kV at 25 °C with a 5-s injection time (hydrodynamic injection). The four ketoconazole stereoisomers were successfully resolved for the first time within 17 min (total analysis time was 28 min including capillary conditioning). The migration time precision of this method was examined to give repeatability and reproducibility with RSDs ≤5.80% (n =3) and RSDs ≤8.88% (n =9), respectively.
    Matched MeSH terms: Sodium Dodecyl Sulfate/chemistry
  8. Wan Ibrahim WA, Abd Wahib SM, Hermawan D, Sanagi MM, Aboul-Enein HY
    Chirality, 2012 Mar;24(3):252-4.
    PMID: 22271616 DOI: 10.1002/chir.21990
    A cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) technique has been developed for enantioseparation of vinpocetine using an inexpensive 2-hydroxypropyl-β-CD (HP-β-CD) as the chiral selector (CS). The best chiral separation was achieved using 40 mM HP-β-CD as the CS in 50 mM phosphate buffer (pH 7.0) consisting of 40 mM sodium dodecyl sulfate (SDS) at a separation temperature and separation voltage of 25°C and 25 kV, respectively. To the author's best knowledge, this is the first CD-MEKC study able to successfully separate the four stereoisomer of vinpocetine in separation time of 9.5 min and resolution of 1.04-3.87.
    Matched MeSH terms: Sodium Dodecyl Sulfate/chemistry
  9. Wan Ibrahim WA, Hermawan D, Sanagi MM
    J Chromatogr A, 2007 Nov 2;1170(1-2):107-13.
    PMID: 17915239
    A method for the chiral separation of propiconazole using cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) with hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) as chiral selector is reported. The use of a mixture of 30 mM HP-gamma-CD, 50mM SDS, methanol-acetonitrile 10%:5% (v/v) in 25 mM phosphate buffer solution was able to separate two enantiomeric pairs of propiconazole. Stacking- and sweeping-CD-MEKC under neutral pH (pH 7) and under acidic condition (pH 3.0) were used as two on-line preconcentration methods to increase detection sensitivity of propiconazole. Good repeatabilities in the migration time, peak area and peak height were obtained in terms of relative standard deviation (RSD). A sensitivity enhancement factor of 100-fold was achieved using sweeping-CD-MEKC at acidic pH. This is the first report on the separation of two pairs of propiconazole enantiomers and all the enantiomers of fenbuconazole and tebuconazole using sweeping-CD-MEKC. The limit of detection (S/N=3) for the three triazole fungicides ranged from 0.09 to 0.1 microg/mL, which is well below the maximum residue limits (MRL) set by Codex Alimentarius Commission (CAC). Combination of solid-phase extraction (SPE) pretreatment and sweeping-CD-MEKC procedure was applied to the determination of selected triazole fungicides in grapes samples spiked at concentration 10-40 times lower than the MRL established by the CAC. The average recoveries of the selected fungicides in spiked grapes samples were good, ranging from 73% to 109% with RSD of 9-12% (n=3).
    Matched MeSH terms: Sodium Dodecyl Sulfate/chemistry
  10. Walker D
    Endod Prac, 1999 Feb;2(1):8-12.
    PMID: 10740482
    Matched MeSH terms: Sodium Hypochlorite
  11. Wakabayashi H, Wijayanto T, Lee JY, Hashiguchi N, Saat M, Tochihara Y
    J Physiol Anthropol, 2014 Feb 04;33(1):5.
    PMID: 24490869 DOI: 10.1186/1880-6805-33-5
    BACKGROUND: This study investigated the effect of hydration differences on body fluid and temperature regulation between tropical and temperate indigenes exercising in the heat.

    METHODS: Ten Japanese and ten Malaysian males with matched physical characteristics (height, body weight, and peak oxygen consumption) participated in this study. Participants performed exercise for 60 min at 55% peak oxygen uptake followed by a 30-min recovery at 32°C and 70% relative air humidity with hydration (4 times each, 3 mL per kg body weight, 37°C) or without hydration. Rectal temperature, skin temperature, heart rate, skin blood flow, and blood pressure were measured continuously. The percentage of body weight loss and total sweat loss were calculated from body weight measurements. The percentage change in plasma volume was estimated from hemoglobin concentration and hematocrit.

    RESULTS: Malaysian participants had a significantly lower rectal temperature, a smaller reduction in plasma volume, and a lower heart rate in the hydrated condition than in the non-hydrated condition at the end of exercise (P <0.05), whereas Japanese participants showed no difference between the two hydration conditions. Hydration induced a greater total sweat loss in both groups (P <0.05), and the percentage of body weight loss in hydrated Malaysians was significantly less than in hydrated Japanese (P <0.05). A significant interaction between groups and hydration conditions was observed for the percentage of mean cutaneous vascular conductance during exercise relative to baseline (P <0.05).

    CONCLUSIONS: The smaller reduction in plasma volume and percentage body weight loss in hydrated Malaysians indicated an advantage in body fluid regulation. This may enable Malaysians to reserve more blood for circulation and heat dissipation and thereby maintain lower rectal temperatures in a hydrated condition.

    Matched MeSH terms: Sodium/blood
  12. WHITTOW GC
    Med J Malaya, 1956 Dec;11(2):126-33.
    PMID: 13417936
    Matched MeSH terms: Sodium Chloride/urine*; Sodium Chloride, Dietary*
  13. W.I. Wan Rosli, M.A. Solihah, A.R. Nurhanan, W.A. Wan Amir Nizam
    Sains Malaysiana, 2015;44:1167-1174.
    Cornsilk is traditionally used to treat illnesses related to kidney and as diuretic agent. The study was performed to evaluate the effectiveness of Malaysian cornsilk in elevating diuresis and their dose response relationship in normal Sprague-Dawley rat. The diuresis activity was determined by administered the rats with different dose treatments of 400, 500, 600, 700 and 800 mg/kg. Cumulative urine was significantly increased with the dosage levels (400-600 mg/ kg) ranging from 14.06 - 20.13 mL. Cumulative urine of aqueous extract of cornsilk (AEC) at 400 mg/kg (14.06 mL) and 500 mg/kg (15.21 mL) treatments found to be significantly lower than positive control (21.25 mL). In addition, Na+ content was significantly higher compared with negative control at dosages of 500, 600, 700 and 800 mg/kg. At any rate, K+ and Cl- content of all AEC treatments were not significantly different during 24 h monitoring. The pH values were increased paralleled with the increment of AEC dosages, though it was not significant. On the other result, the ED50 of AEC was observed at 454.10 mg/kg. Malaysian AEC had shown a mild diuretic activity in elevating urine and Na+ content at dosages from 500 to 800 mg/kg. Whilst, AEC also showed an effect of potassium sparing diuretics. Thus, it is suggested that Malaysian cornsilk can be used as an alternative natural diuretic agent.
    Matched MeSH terms: Sodium
  14. Voon, H.C., Bhat, Rajeev, Karim, A.A., Rosma, A.
    MyJurnal
    Traditionally, in Chinese medicine, tree peony and apple flower buds are used to prepare herbal decoctions to cure various ailments. As both of these flowers are popular and used regularly, providing scientific evidence on their basic composition is a necessity. Hence, in the present study, we report the chemical composition of these two flower buds. Results revealed tree peony and apple flower buds to have high crude protein (15.73 and 26.30%), fibre (13.11 and 16.51%), and carbohydrate (57.84 and 40.63%) contents. Both the flowers had significant amounts of essential amino acids and unsaturated fatty acids. Essential minerals present in tree peony and apple flowers were potassium (1540.37 and 1125.60 mg/100 g), calcium (462.46 and 449.98 mg/100 g), magnesium (241.51 and 164.23 mg/100 g), sodium (12.75 and 20.06 mg/100 g), and phosphorus (420.00 and 590.00 mg/100 g), respectively. Heavy metals (cadmium, nickel, mercury, lead, and arsenic) were detected in trace amounts (< 0.50 mg/100 g) in both the flower buds. Results obtained indicate that both flowers could be exploited as an additional source of nutraceutical for the development of new functional foods.
    Matched MeSH terms: Sodium
  15. Vlassopoulos A, Masset G, Charles VR, Hoover C, Chesneau-Guillemont C, Leroy F, et al.
    Eur J Nutr, 2017 Apr;56(3):1105-1122.
    PMID: 26879847 DOI: 10.1007/s00394-016-1161-9
    PURPOSE: To describe the Nestlé Nutritional Profiling System (NNPS) developed to guide the reformulation of Nestlé products, and the results of its application in the USA and France.

    DESIGN: The NNPS is a category-specific system that calculates nutrient targets per serving as consumed, based on age-adjusted dietary guidelines. Products are aggregated into 32 food categories. The NNPS ensures that excessive amounts of nutrients to limit cannot be compensated for by adding nutrients to encourage. A study was conducted to measure changes in nutrient profiles of the most widely purchased Nestlé products from eight food categories (n = 99) in the USA and France. A comparison was made between the 2009-2010 and 2014-2015 products.

    RESULTS: The application of the NNPS between 2009-2010 and 2014-2015 was associated with an overall downwards trend for all nutrients to limit. Sodium and total sugars contents were reduced by up to 22 and 31 %, respectively. Saturated Fatty Acids and total fat reductions were less homogeneous across categories, with children products having larger reductions. Energy per serving was reduced by <10 % in most categories, while serving sizes remained unchanged.

    CONCLUSIONS: The NNPS sets feasible and yet challenging targets for public health-oriented reformulation of a varied product portfolio; its application was associated with improved nutrient density in eight major food categories in the USA and France. Confirmatory analyses are needed in other countries and food categories; the impact of such a large-scale reformulation on dietary intake and health remains to be investigated.

    Matched MeSH terms: Sodium
  16. Vincent M, Pometto AL, van Leeuwen JH
    Bioresour Technol, 2014 Apr;158:1-6.
    PMID: 24561994 DOI: 10.1016/j.biortech.2014.01.083
    Ethanol was produced via the simultaneous saccharification and fermentation (SSF) of dilute sodium hydroxide treated corn stover. Saccharification was achieved by cultivating either Phanerochaete chrysosporium or Gloeophyllum trabeum on the treated stover, and fermentation was then performed by using either Saccharomyces cerevisiae or Escherichia coli K011. Ethanol production was highest on day 3 for the combination of G. trabeum and E. coli K011 at 6.68 g/100g stover, followed by the combination of P. chrysosporium and E. coli K011 at 5.00 g/100g stover. SSF with S. cerevisiae had lower ethanol yields, ranging between 2.88 g/100g stover at day 3 (P. chrysosporium treated stover) and 3.09 g/100g stover at day 4 (G. trabeum treated stover). The results indicated that mild alkaline pretreatment coupled with fungal saccharification offers a promising bioprocess for ethanol production from corn stover without the addition of commercial enzymes.
    Matched MeSH terms: Sodium Hydroxide/metabolism*
  17. Vijayasree VP, Abdul Manan NS
    Int J Biol Macromol, 2023 Jul 01;242(Pt 1):124723.
    PMID: 37148927 DOI: 10.1016/j.ijbiomac.2023.124723
    In this study, magnetite carboxymethylcellulose (CMC@Fe3O4) composite as magnetic biological molecules were synthetized for the use as adsorbent to remove four types of cationic dyes, namely Methylene Blue, Rhodamine B, Malachite Green, and Methyl Violet from aqueous solution. The characteristic of the adsorbent was achieved by Fourier Transform Infrared Spectroscopy, Field Emission Scanning Electron Microscope (FESEM), X-ray Diffraction, Vibrating Sample Magnetometer and Thermal Gravimetric Analysis techniques. Besides, essential influencing parameters of dye adsorption; the solution pH, solution temperature, contact time, adsorbent concentration and initial dye dosage were studied. FESEM analysis showed the magnetic Fe3O4-TB, Fe3O4@SiO2, Fe3O4@SiO2-NH2 and CMC@Fe3O4 composites were in spherical shape, with average size of 43.0 nm, 92.5 nm, 134.0 nm and 207.5 nm, respectively. On the saturation magnetization (Ms), the results obtained were 55.931 emu/g, 34.557 emu/g, 33.236 emu/g and 11.884 emu/g. From the sorption modelling of Isotherms, Kinetics, and Thermodynamics, the adsorption capacity of dyes is (MB = 103.33 mg/g), (RB = 109.60 mg/g), (MG = 100.08 mg/g) and (MV = 107.78 mg/g). With all the adsorption processes exhibited as exothermic reactions. The regeneration and reusability of the synthetized biological molecules-based adsorbent was also assessed.
    Matched MeSH terms: Carboxymethylcellulose Sodium/chemistry
  18. Vijayakumaran, R.K., Nur Amalina, S.
    Food Research, 2018;2(3):228-233.
    MyJurnal
    This study was carried out to determine the influences of providing nutrition information
    on fast food restaurant menus, especially among Malaysian undergraduates, who often eat
    outside the campus during the semester. A validated questionnaire, adapted from previous
    studies was used to determine the general perception of nutrition information and nutrient
    intake when eating at fast food restaurants. A total of 185 undergraduates from three
    different schools participated - medical sciences (n=54, 29.2%), dentistry, (n=54, 29.2%),
    health sciences (n= 77, 41.6%) in a university. In general, the majority of the
    undergraduates ate fast food at least once a week (n= 105, 56.8%) and most of them
    preferred to eat outside on weekends (n=156, 84.3%). Majority perceived that it was
    important to provide nutrition information at fast food restaurant (n=183, 98.9%). The
    mean for calorie, fat and sodium composition of their food choices were significantly
    different between before and after providing nutrition information of food items that they
    intended to purchase (p
    Matched MeSH terms: Sodium
  19. Veronica N, Heng PWS, Liew CV
    Mol Pharm, 2024 May 06;21(5):2484-2500.
    PMID: 38647432 DOI: 10.1021/acs.molpharmaceut.4c00031
    Excipients are ubiquitous in pharmaceutical products, and often, they can also play a critical role in maintaining product quality. For a product containing a moisture-sensitive drug, moisture can be deleterious to the product stability during storage. Therefore, using excipients that interact with moisture in situ can potentially alleviate product stability issues. In this study, the interactive behavior of starch with moisture was augmented by coprocessing maize starch with sodium chloride (NaCl) or magnesium nitrate hexahydrate [Mg(NO3)2·6H2O] at different concentrations (5 and 10%, w/w). The effect of the formulation on drug stability was assessed through the degradation of acetylsalicylic acid, which was used as the model drug. The results showed that coprocessing of the starch with either NaCl or Mg(NO3)2·6H2O impacted the number of water molecule binding sites on the starch and how the sorbed moisture was distributed. The coprocessed excipients also resulted in lower drug degradation and lesser changes in tablet tensile strength during post-compaction storage. However, corresponding tablet formulations containing physical mixtures of starch and salts did not yield promising outcomes. This study demonstrated the advantageous concomitant use of common excipients by coprocessing to synergistically mitigate the adverse effects of moisture and promote product stability when formulating a moisture-sensitive drug. In addition, the findings could help to improve the understanding of moisture-excipient interactions and allow for the judicious choice of excipients when designing formulations containing moisture-sensitive drugs.
    Matched MeSH terms: Sodium Chloride/chemistry
  20. Verma N, Rastogi S, Chia YC, Siddique S, Turana Y, Cheng HM, et al.
    J Clin Hypertens (Greenwich), 2021 07;23(7):1275-1283.
    PMID: 33738923 DOI: 10.1111/jch.14236
    Hypertension is an insidious disease which predisposes to cardiovascular complications and if not treated properly can lead to various serious complications. Economic limitations, having additional benefits with few or almost no side effects have made non-pharmacological management of hypertension an attractive approach for dealing with hypertension, in developed and developing countries alike. A MEDLINE search was done for relevant references with emphasis on original studies, randomized controlled trials, and meta-analyses for this review paper. Lifestyle modifications including changes in the dietary pattern, adopting special diets with low sodium, saturated fat and high calcium, magnesium and potassium and trying the new methods like time restricted meal intake which work in tandem with the circadian rhythm are opening new vistas in the field of non-pharmacological management of hypertension. Lifestyle modifications that effectively lower blood pressure are increased physical activity, weight loss, limited alcohol consumption, relaxation techniques of Yoga, Acupuncture, Tai chi, mindfulness-based stress-reduction program, and Transcendental Meditation. Air pollution of the surrounding air is linked with poor health outcomes and is a major contributor to the global burden of disease. Fine particulate matter <2.5 μm in diameter (PM2.5) is strongly associated with cardiovascular morbidity and mortality. Short-term PM exposure (hours to weeks) increases the likelihood of adverse cardiovascular events including myocardial infarction, stroke, and heart failure, and longer-term exposure multiplies that risk. Non-pharmacological methods should be initiated early phase of disease and should be continued with medication.
    Matched MeSH terms: Diet, Sodium-Restricted
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links