Otoliths, which can be used for the evaluation of relationships between the environment and organisms, are structures
consisting of calcium carbonate. The aim of this study was to realize the shape analysis. In addition, it is to detect the
characteristics of otolith biometrics in order to determine the relationship between the fish size of Engraulis encrasicolus
L. from the Black and Marmara Seas. The samples were obtained from the Black and Marmara Seas between December
2013 and February 2014. The relationships between the TL (Total length) and OL (Otolith length), TL and OB (Otolith
breadth), and TL and OW (Otolith weight) were determined using the linear regression equation. Form factor, roundness,
circularity and rectangularity were used for shape analyses. According to the data, there was no difference between
localities (p>0.05). Moreover, there was no difference between the left and right otoliths of the individuals sampled from
the same locality (p>0.05). According to the regression coefficient for relationships of TL-OL, TL-OB and TL-OW, otolith
length was identified as the best index for estimating fish length (r
2
>0.70). It showed that index values were statistically
different between two populations (p<0.001).
The dataset presented here are part of the data planned to produce biodiesel from flaxseed. Biodiesel production from flaxseed oil through transesterification process using KOH as catalyst, and the operating parameters were optimized with the help of face-centered central composite design (FCCD) of response surface methodology (RSM). The operating independent variables selected such as, methanol oil ratio (4:1 to 6:1), catalyst (KOH) weight (0.40-1.0%), temperature (35 °C-65 °C), and reaction time (30 min-60 min) were optimized against biodiesel yield as response. The maximum yield (98.6%) of biodiesel from flaxseed can achieved at optimum methanol oil ratio (5.9:1), catalyst (KOH) weight (0.51%), reaction temperature (59.2 °C), and reaction time (33 min). The statistical significance of the data set was tested through the analysis of variance (ANOVA). These data were the part of the results reported in "Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations" Renewable Energy [1].
This data article is about bats observed from fragmented forest understories interspaced by agricultural plantations, utility corridors, and man-made structures within rural areas of Setiu (Bukit Kesing Forest Reserve and Ladang Tayor TDM) and Hulu Terengganu (Pengkalan Utama and Sungai Buweh, Kenyir) that are situated in Terengganu state, Peninsular Malaysia. Surveys were conducted from October 2018 until January 2019. These bats were captured using harp traps and mist nets that were set 30 m apart across flyways, streams, rivers and less cluttered trees in the 50 m transect zones (identified at each site). All animals captured were distinguished by morphology and released at the same location it was caught. The data comprise of 15 species of bats from four family groups, namely Hipposideridae, Pteropodidae, Rhinolophidae and Vespertilionidae. The data were interpreted into weight-forearm length (W-FA) to inform about bats Body Condition Index (-0.25 to 0.25).
Research on joint torque reduction in robot manipulators has received considerable attention in recent years. Minimizing the computational complexity of torque optimization and the ability to calculate the magnitude of the joint torque accurately will result in a safe operation without overloading the joint actuators. This paper presents a mechanical design for a three dimensional planar redundant manipulator with the advantage of the reduction in the number of motors needed to control the joint angle, leading to a decrease in the weight of the manipulator. Many efforts have been focused on decreasing the weight of manipulators, such as using lightweight joints design or setting the actuators at the base of the manipulator and using tendons for the transmission of power to these joints. By using the design of this paper, only three motors are needed to control any n degrees of freedom in a three dimensional planar redundant manipulator instead of n motors. Therefore this design is very effective to decrease the weight of the manipulator as well as the number of motors needed to control the manipulator. In this paper, the torque of all the joints are calculated for the proposed manipulator (with three motors) and the conventional three dimensional planar manipulator (with one motor for each degree of freedom) to show the effectiveness of the proposed manipulator for decreasing the weight of the manipulator and minimizing driving joint torques.
A bulk of used paper supplied to recycling industry may contain water in their internal voids. This is because the price of the used paper is currently based on their weight and it has a huge potential of suppliers to add with water in order to increase the price. Currently used methods for detecting moisture content in a paper are restricted to a sheet of paper only. This paper presents a non-intrusive method for quick and in-situ measurement of water content in a bulk of used paper. The proposed method extends the capability of common paper moisture gauge, by using a neutron device. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector are used for water measurement. It theoretically indicates that the slow neutron counts can be correlated to the hydrogen or water level in a paper. The method has the potential of being used by the paper-recycling industry for rapid and non-destructive measurement of water in a bulk of used paper.
In a meristic, morphometric and distributional study of Neolissochilus from Peninsular Malaysia, Khaironizam et al. (2015) subsumed Lissochilus tweediei Herre in Herre & Myers 1937 and a taxon they called "Tor soro Bishop 1973" into the synonymy of N. soroides (Duncker 1904) based on data collected from museum specimens. However, "Bishop 1973" is not the correct author citation for Tor soro. Instead, Tor (now placed in Neolissochilus) soro was originally described as Barbus soro by Valenciennes in Cuvier & Valenciennes (1842:191). Since "Tor soro Bishop 1973" is not a valid name/author combination, Neolissochilus soro, as treated by Khaironizam et al. (2015), cannot be considered a junior synonym of N. soroides.
Mini purse seine has a major contribution in increasing production of small pelagic catches in Pelabuhan Perikanan Pantai (PPP) Muncar. This research aimed to investigate the effectiveness and efficiency of mini one-boat and two-boat purse seine in Bali Strait, Indonesia. This research was conducted in Mei 2018 in Muncar, East Java, Indonesia. In this study, survey was used to get the data by distributed the questioners to the fisherman. The primary data are total catch composition, fork length, individual weight of total catch and operation time of both fishing gears. Data were analysed by main catch and bycatch proportion, legal size proportion and catch rate. The results showed that the mini two-boat purse seine had a greater catch volume compared to the mini one-boat purse seine. The bycatch composition dominates in both fishing gear. The proportion of legal-size catching is 67% of the total. The fork length is not significantly different and for the total catches is significantly different. The catching rate of the mini purse seine one boat catch rate is lower at 4,048.67 kg/hour, compared to the mini two-boat purse seine which is 9,189.18 kg/hour.
Analyses of conventional morphometric, meristic and truss morphometric were performed on two
species of Pangasiid catfish, Pangasius pangasius and P. nasutus. The purpose is to find characters that help in differentiating these two species to avoid confusion among fish farmers. Three morphometric approaches (conventional, meristic and truss morphometric) were employed to identify the morphological differences. Conventional morphometric suggested eye diameter, body width, body depth, dorsal fin base length and barbells as characters that have significant differences (P< 0.05) between the species, hence making them as potential diagnostic markers. Truss morphometric analyses approved that P. nasutus have larger dorsal fin base length as suggested by conventional morphometry data. Meristic analysis showed significant difference (P
The role of visual acuity and refractive errors in the academic performance of children is controversial due to the variable quality of the research in this area and the mixed findings reported. This review aims to provide clarity by reviewing and critiquing relevant peer-reviewed publications and also summarises what is known regarding the visual demands of modern classroom environments. The outcomes of this review suggest that while a number of studies have investigated the role of vision in relation to children's academic performances, the veracity of the evidence obtained from the majority of these studies is undermined by methodological limitations. Comparisons between studies are constrained by differences in experimental designs, instrumentation and sample characteristics. Despite these limitations, the weight of evidence suggests there is an association between academic performance and both visual acuity and refractive error in children. However, well-designed experimental studies are necessary to further understand the relationship between these parameters.
Paper recycling plants usually buy their raw material from suppliers. More than often, bulk used paper supplied to the plant contains some significant quantity of water in its internal voids. It may be included intentionally or unintentionally. The price of used paper depends on its weight, thus adding water will help to increase weight and consequently increase the price. In this way, plant owner who purchase the used paper suffers a significant of financial lost. The objectives of our experiment are to establish a calibration curve that correlate between the amount of neutron backscattered and water content, and finally to develop a correction factor that need to be introduced to the measured values of water content. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector were used for water measurement. The experiments were carried out by measuring neutron backscattering from used paper that has been added with different amount of water. As a result, a neutron calibration curve that provides a correlation between neutron backscattering and water content was established.
The physico-mechanical properties data of fruits are important in the design of various handling, packing, and storage and transportation system. The physical-mechanical properties of pineapple fruit from the Josapine variety, namely the weight of the fruit (with and without peel), pulp to peel ratio, diameter of the whole fruit (with and without peel), at three different positions along the longitudinal axis of the fruit, length of the fruit (with and without peel) and the length of crown were studied using the standard method at seven stages of maturity during storage at 25°C and 52% (RH). The effect of fruit maturity on the firmness of each fruit at three different locations was measured using a cylindrical die of 6 mm in diameter with the Instron Universal Testing Machine. The results indicated that the average total weight of a single fruit is 886.86 ± 49.67 g. The average pulp to peel ratio is 1.91. The average diameter (with and without peel) was 86.83 ± 5.24 mm and 80.95 ± 4.15 mm (top section), 100.77 ± 3.84 mm and 90.19 ± 3.73 mm (middle section) and 97.17 ± 3.49 mm and 73.30 ± 5.11 mm (bottom section), respectively. The average length of the fruit (with and without peel) was 126.65 mm and 113.64 mm, respectively. The average length of crown was 89.13 mm. The firmness of the fruits was found to decrease with the stage of maturity. These data are important in determining the optimum stage of maturity for fruit processing.
In hilly forest area, aligning forest roads is the key towards an effective and sustainable forest management. Constraints in forest road planning are mainly due to environmental factors and topographical conditions. Selecting the criteria for planning forest road and setting the priorities, ranking them for environmental sustainability and reduce cost in road construction is important. Different criteria are required at different forest area since the quantifiable relationship between cause and effect to meet the goal are not comprehensively prioritized. In order to solve the problem, the relative importance factor from multi criteria basis, namely Analytic Hierarchy Process (AHP) was applied. Therefore, the objective of this study was to develop priorities and rank a selected criterion for planning forest road in hilly area using AHP approach. Four criteria had been identified to meet the goal of suitable forest road allocation namely slope, river crossing, elevation and existing forest road. The suitable criteria selected were sorted with weight in ranking order to minimize the impact of timber harvesting. Our results showed that the priorities and ranking were as follows; slope (w = 0.558), followed by river crossing (w = 0.303), elevation (w = 0.095) and lastly existing forest road (w = 0.044), respectively. Therefore, the relative preference factor developed in this study can be used by the Forestry Department for formulating suitable forest road allocation in hilly area simultaneously to be integrated with geographic information system technology.
The combustion characteristics of refuse derived fuel (RDF) in a fluidized bed have been studied. The gross heating value (GHv) of the RDF was 14.43 MJIkg with moisture content of 25% by weight. Parameters of interest for sustainable bed combustion were the fluidization number and primary air factor. The study was performed in a rectangular fluidized bed combustor with dimensions of 0.3 m in width, 0.7 m in length and 2 m in height. Sand with mean particle size of 0.34 mm was used as a fluidization medium. The sand bed height was at 0.3 m above the standpipes air distributor. The range of fluidization number under investigation was 5-7 II fin which 5 II newas found to be the optimum. The study was continued for the determination of the optimum primary air factor with the selected range of primary air factors being 0.6, 0.8, 1.0 and 12 in experiments conducted at 5 Unit The final results showed that the optimum primary air factor was at 0.8. An energy balance was also performed to determine the thermal efficiency of the combustion. It was concluded that the thermal efficiency depended on the bed temperature and the primary air factor being used.
It has been observed previously that the physical behaviors of Schmidt number (Sc) and Prandtl number (Pr) of an energy-conserving dissipative particle dynamics (eDPD) fluid can be reproduced by the temperature-dependent weight function appearing in the dissipative force term. In this paper, we proposed a simple and systematic method to develop the temperature-dependent weight function in order to better reproduce the physical fluid properties. The method was then used to study a variety of phase-change problems involving solidification. The concept of the "mushy" eDPD particle was introduced in order to better capture the temperature profile in the vicinity of the solid-liquid interface, particularly for the case involving high thermal conductivity ratio. Meanwhile, a way to implement the constant temperature boundary condition at the wall was presented. The numerical solutions of one- and two-dimensional solidification problems were then compared with the analytical solutions and/or experimental results and the agreements were promising.
Soft biometrics can be used as a prescreening filter, either by using single trait or by combining several traits to aid the performance of recognition systems in an unobtrusive way. In many practical visual surveillance scenarios, facial information becomes difficult to be effectively constructed due to several varying challenges. However, from distance the visual appearance of an object can be efficiently inferred, thereby providing the possibility of estimating body related information. This paper presents an approach for estimating body related soft biometrics; specifically we propose a new approach based on body measurement and artificial neural network for predicting body weight of subjects and incorporate the existing technique on single view metrology for height estimation in videos with low frame rate. Our evaluation on 1120 frame sets of 80 subjects from a newly compiled dataset shows that the mentioned soft biometric information of human subjects can be adequately predicted from set of frames.
Matched MeSH terms: Body Weights and Measures/methods*
This paper presents an anthropometric database of high school and university students from Kuala Lumpur, Malaysia. Forty-one high school participants (21 males and 20 females), 13-17 years old, and 143 university students (74 males and 69 females) took part in the study. Twenty-one static body dimensions were measured. The greatest mean differences in the anthropometric data between male and female high school students were found in the sitting elbow height. In addition, a comparison of anthropometric data of male and female university students showed that data for males and females were significantly different, except for buttock-popliteal length, sitting elbow height and thigh clearance. The primary aim of this study was to develop an anthropometric database that could be used as a primary reference in designing products, devices and equipment for ergonomic learning environments.
Cancer classification and gene selection in high-dimensional data have been popular research topics in genetics and molecular biology. Recently, adaptive regularized logistic regression using the elastic net regularization, which is called the adaptive elastic net, has been successfully applied in high-dimensional cancer classification to tackle both estimating the gene coefficients and performing gene selection simultaneously. The adaptive elastic net originally used elastic net estimates as the initial weight, however, using this weight may not be preferable for certain reasons: First, the elastic net estimator is biased in selecting genes. Second, it does not perform well when the pairwise correlations between variables are not high. Adjusted adaptive regularized logistic regression (AAElastic) is proposed to address these issues and encourage grouping effects simultaneously. The real data results indicate that AAElastic is significantly consistent in selecting genes compared to the other three competitor regularization methods. Additionally, the classification performance of AAElastic is comparable to the adaptive elastic net and better than other regularization methods. Thus, we can conclude that AAElastic is a reliable adaptive regularized logistic regression method in the field of high-dimensional cancer classification.
The differential evolution algorithm has been widely applied on unmanned aerial vehicle (UAV) path planning. At present, four random tuning parameters exist for differential evolution algorithm, namely, population size, differential weight, crossover, and generation number. These tuning parameters are required, together with user setting on path and computational cost weightage. However, the optimum settings of these tuning parameters vary according to application. Instead of trial and error, this paper presents an optimization method of differential evolution algorithm for tuning the parameters of UAV path planning. The parameters that this research focuses on are population size, differential weight, crossover, and generation number. The developed algorithm enables the user to simply define the weightage desired between the path and computational cost to converge with the minimum generation required based on user requirement. In conclusion, the proposed optimization of tuning parameters in differential evolution algorithm for UAV path planning expedites and improves the final output path and computational cost.
This paper is about the reduction of the overall size of metal blanking sheet that is being used to form a stamping product or car body panel of a car manufacturer in Malaysia. The current blanking sheet produces extra waste which will be recycled and does not contribute to increase productivity but increases inventory cost. The reduction in the blanking sheet size will lead to the reduction of raw material hence reduced the production cost. However, the reduced size of blanking sheet could affect the yield strength of the product. The study of the yield strength and yield improvement of the product are done by simulating stress analysis by using CATIA software. The results show that the new proposed size of the metal blanking sheet provides accuracy of the product dimension as well as maintaining the yield strength of the product and it reduced a significant amount of metal scrap which is nearly 4% of material weight and save around 10% of inventory cost.