Displaying publications 81 - 100 of 105 in total

Abstract:
Sort:
  1. Jeyaletchumi, P., Tunung, R., Margaret, S.P., Son, R., Ghazali, F.M., Cheah, Y.K., et al.
    MyJurnal
    The aim of this study was to assess the most probable number-polymerase chain reaction (MPNPCR) technique for detection of Listeria monocytogenes in salad vegetables in comparison with reference EN ISO 11290-2 and Food Drug Administration Bacteriological Analytical Manual method using artificial and naturally contaminated samples. Based on recovery of L. monocytogenes from artificially contaminated samples, MPN-PCR showed a moderate correlation (R=0.67) between spiking concentration and microbial levels which was better than the FDA-BAM method (R=0.642) and ISO 11290-2:1998 method (R=0.655). With naturally contaminated samples, it was found that L. monocytogenes was detected in 25% of the vegetable samples using MPN-PCR; 15% of the samples by the FDA-BAM method and 8% of samples using ISO 11290-2:1998 method. Overall, MPN-PCR was found to be a rapid and reliable method that could facilitate the enumeration of L. monocytogenes in vegetables.
    Matched MeSH terms: Physiological Processes
  2. Ali, A.H.M., Sobri, S., Salmiaton, A., Faizah, M.Y.
    MyJurnal
    The process of etching is the most crucial part of the work of manufacturing printed circuit boards (PCB). In the etching process by nitric acid, a spent etching waste solution of composition 250 g/L HNO3, 30-40 g/L Cu, 30-40 g/L Sn, 30-40 g/L Pb and 20-25 g/L Fe is produced. High metal concentrations in the spent etching waste solution make it a viable candidate for the recovery of metals. Recovery of metals from spent etching waste solution is a significant concern as the recent growth in production of printed circuit boards has generated a drastic increase of spent etching waste solution each year. This study concerns itself with the recovery of metals from spent etching waste. In this study a dilution was made in order to increase the pH of the solution as spent etching waste solution has high acidity, and the electrowinning method was performed to recover metals from the spent etching waste solution. Glassy carbon and platinum were used as cathode and anode in order to investigate the electrodeposition of metals and cyclic voltammetry investigation suggests that the deposition of metals on glassy carbon electrodes occurs at four different overpotentials mainly at -0.15 V, -0.35 V, -0.45 V and -0.75 V. Microscopy observation demonstrates that there is a deposition of metals by applying the potentials in a set of current-time transient study for a duration of 60 seconds and the metals recovered formed as aggregates.
    Matched MeSH terms: Physiological Processes
  3. Kundabala, M., Shetty, Neeta, Parolia, Abhishek
    Malaysian Dental Journal, 2010;31(2):94-0.
    MyJurnal
    Tissue regeneration is a rapidly growing field providing a beacon of hope in the field of restorative and endodontics. Root canal treatment involves the removal of pulp tissue and replacement by an inorganic materials where as regenerative endodontics deals with replacement with healthy pulp to revitalize the teeth .Research in the field of tissue engineering and material science have lead to significant progress but still is plague with lots of drawbacks and failures, hence it is still not being adapted as routine clinical procedures .The purpose of this article is to review the advances made in regenerative endodontics and the future scopes.
    Matched MeSH terms: Physiological Processes
  4. Radzi, Z., Yahya, N.A.
    Ann Dent, 2005;12(1):-.
    MyJurnal
    Breast-feeding offers many benefits to the baby and the mother. For instance, breast milk provides the right balance of nutrients to help an infant grow into a strong and healthy toddler. Even though breastfeeding is a natural process, it is not always easy. In certain situations, some mothers are unable to breastfeed their babies or the babies are unable to adapt to breastfeeding. This will lead to the use of bottle-feeding. The effect of breast-feeding and bottle-feeding on physical growth has been well established but less has been concentrated on the craniofacial growth and dental development. This review reveals the effects of breast-feeding and bottle-feeding on craniofacial growth and dentoalveolar development based on the available literature.
    Matched MeSH terms: Physiological Processes
  5. Rafidah, B., Muhammad Najib, M.A., Muhammad Radhi, A.M., Ismail, M.S.
    MyJurnal
    This case series reports four patients who used religion and spirituality to relieve symptoms of post traumatic stress disorder (PTSD) following motor vehicle accidents. Their symptoms subsided after a few weeks and the recovery is sustained after one month. This demonstrates that in a country where psychological help is still scarce and religion is central to its culture, intervention based on spirituality and religion can be used as an alternative early intervention to relieve symptoms of PTSD and hence protects them from developing the condition.
    Matched MeSH terms: Physiological Processes
  6. WYLDE EM
    Med J Malaya, 1959 Jun;13:316-21.
    PMID: 13846272
    Matched MeSH terms: Physiological Processes*
  7. Varatharajoo, R.
    ASM Science Journal, 2011;5(2):153-155.
    MyJurnal
    Malaysia has adopted various strategies in developing its space sector. Indigenous space technologies would enable a sustainable growth of the space field and at the same time develop the strategic space technologies. Therefore, issues related to the current space research level are fundamentally crucial to be highlighted. Subsequently, the space focus areas can be derived in order to meet the expectations of the national and international space technology growth requirements, which are moving on to a stronger posture in R&D. In the absence of a strong R&D national space industry leadership, the Malaysian space sector remains in a traditional downstream mode of the world space technology supply chain ever since. The space technology supply chain can be divided into the ground segment and the space segment. This paper examines the current space research activities in Malaysia within the framework of the space technology supply chain. As a result, a preliminary gap in the overview of space research in Malaysia is established.
    Matched MeSH terms: Physiological Processes
  8. Norhidayah, S., Baharin, B.S., Hamed, M., Zaidul, I.S.M.
    MyJurnal
    The objective of this research is recovery of squalene from palm fatty acid distillate (PFAD) using supercritical fluid extraction (SFE). The extraction process was performed by using the SFE and recovered squalene was analyzed from total lipid extracts using HPLC. A central composite design was used to study the effect of SFE variables namely pressure (X₁) from 200 to 400 bar and temperature (X₂) from 40 to 60⁰C on the total lipid extracts (Y₁) and squalene concentration (Y₂) and optimize the SFE conditions. The nonlinear regression equations were significantly (p < 0.05) fitted for both responses with high R₂ (> 0.965), which had no indication of lack of fit. The results indicated that a combined pressure (200 bar) and temperature (50⁰C) was predicted to provide the optimum region in terms of total lipid extracts (13.84 ± 0.52%) and squalene concentration (418.31 ± 18.40 ppm) studied.
    Matched MeSH terms: Physiological Processes
  9. Razak Mohd Ali Lee, Khairul Anwar Mohamad, Katsuyoshi, Hamasaki
    MyJurnal
    We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
    Matched MeSH terms: Physiological Processes
  10. Zaini Hamzah, Marlinda Musa, Ahmad Saat
    MyJurnal
    There are many essential and non-essential elements including metals and radionuclides present in vegetables. Howeve r, the accumulation of the several metals and radionuclides might cause the contamination to vegetables itself. Green m ustard (Brasissca rapa var. Parachinesis L.) was selected to represent the vegetable in this study. Objectives of this stud y are to determine the concentration of metals and radionuclides in the samples and to calculate the enrichment factor ( EF) and also to estimate the uptake, base on biological accumulation coefficient (BAC), for the various parts of selecte d vegetables. Three farmlands in the Cameron Highlands were studied namely Bharat, Kg Raja and Bertam area. The g reen mustard and soil samples were collected during the harvest season. Samples were dried, ground and sieved prior t o analysis. Analyses for both samples were done by using X-rays Fluorescence Spectroscopy (XRF) to measure the conc entration of Fe, Zn, Hg, U and Th. The concentration of all elements in the soils is lower than their concentration in the control soil, except for Zn, U and Th. The concentration of all elements in Green Mustard is lower than their concentrat ion in the soil where it was grown. The EF values in the Brasissca rapa var. Parachinesis L are lower than 2 except for U and Th, indicating some degree of contamination due to anthropogenic activities or naturally origin. The BAC values show that Zn and Hg were accumulated in the green mustard, depending on where the plant grows.
    Matched MeSH terms: Physiological Processes
  11. MyJurnal
    This study was performed to enumerate the total viable cell count of probiotic in five brands (A to E) of commercially cultured milk drinks that are available in the Malaysian market as well as to test their tolerance to various pH and bile concentrations by simulating the human gastrointestinal pH and bile concentration. The acid tolerance test was studied under pH 1.5 and 3.0 with 7.2 as control. The cell count for the acid tolerance test was obtained at an interval of 0, 1.5 and 3 hours respectively and was plated onto duplicate MRS agars to be incubated at 37°C for 48 hours. All cells recovered after 3 hours of pH treatment were selected for bile tolerance test in MRS broth containing bile concentrations of 0% (control), 0.3% and 2.0% and cell counts were recorded after 24 hours of incubation. The probiotic strains in products A, B, C & D met the suggested initial count of 106 CFU/ml with brand C recording the highest at 9.19 ± 0.14 log CFU/ml. Strains in product A, B & C showed good tolerance to pH 3.0 and 7.2 recording a count of >106 CFU/ml after 3 hours with a range of 6.60 – 9.04 log CFU/ml. The higher bile concentrations resulted in lower growth of strains in all the brands. Upon pH 1.5 treatment, only brand C recorded growth in all bile concentrations. After pH 3.0 treatment, all brands except brand E met the requirement of survival at 0.3% bile concentration. Results showed probiotics in product A, B & C met the initial count requirement, and exhibited good acid and bile tolerance therefore being a potentially good source of probiotic.
    Matched MeSH terms: Physiological Processes
  12. Ng, Boon Lim, Lockman, Zainovia
    MyJurnal
    Texture evolution of NiO formed during oxidation of polycrystalline single oriented (100) Ni-Cr was investigated. This foil was also termed rolling assisted biaxially textured substrate (RABiTS). X-ray diffractograms of oxidized Ni-Cr RABiTS foil showed the existence of mostly (200) NiO indicating (100)-type NiO formed exclusively on (100) singly oriented Ni-Cr grains. Epitaxial relationship between the two layers is observed. However the dual-in-plane texture was recorded.
    The in-plane texture was assessed by conducting phi scan and plotting series of pole figures measured at (111) NiO peak. The mechanism of the oxides formation was proposed to take into account the formation of (100)-type NiO. Cross section morphology of the oxidised foils reveals two oxidation layers; fast growing external layer consisting of the (100)-type NiO and an internal layer consisted of mostly Cr2O3 and maybe NiCr2O4. The thickness of NiO was ~ 10Pm. Cr2O3 formed as needle-like oxides embedded in a matrix of Ni foil. Inward diffusion of oxygen is believed to have caused this to happen. The external NiO layer was consisted of duplex microstructure characterised by columnar layer growing vertical on the surface of the metal and a few micron thick of equiaxed NiO. Delamination of the outer NiO layer often occurred at the columnarequiaxed interface which could be cured by CeO2 deposition on the foil prior to the oxidation process. CeO2 was deposited by conversion immersion using Ce(NO3)3.6H2O solution. (200) NiO formed on this coated sample as well.
    Matched MeSH terms: Physiological Processes
  13. Nurul, H., Ruzita, A., Aronal, A.P.
    MyJurnal
    This study evaluated lipid oxidation in refrigerated (±4ºC) duck meatballs treated with novel antioxidants over 21 days of storage. The duck meatballs were treated with a control substance, Cosmos caudatus (ulam raja) or Polygonum minus (kesum) extract, or BHT (butylated hydroxytoluene), and data was collected every three days. These results showed that Cosmos caudatus and Polygonum minus had better antioxidant effects on duck meatballs than BHT or the control. Folding and microbial potency test results were not significantly different among the three antioxidants tested but were better in antioxidant-treated samples than in control samples. However, Cosmos caudatus and Polygonum minus were slightly more effective in preventing microbial growth. This result suggests that Cosmos caudatus and Polygonum minus may be potentially useful natural resources for enhancing the shelf life of duck meatballs.
    Matched MeSH terms: Physiological Processes
  14. Wee, Siaw Khur, Chok, Vui Soon, Gorin, Alexander, Chua, Han Bing, Yan, Hong Ming
    MyJurnal
    Compartmented Fluidized Bed Gasifier (CFBG), consisting of two compartments - the combustorand gasifier, uses air blown instead of pure oxygen for syngas production in bubbling fluidization mode, eliminating the need of air separation unit, and reducing the capital cost, thus distinguishes it from other traditional ones. Fluidization quality is a determining factor in the CFBG to guarantee its well-lifted behaviour. Previous study, without solid circulation at ambient conditions, brought to the fore the necessity of considering the effect of the minimum allowable effective diameter. The study was then performed in the CFBG cold physical model of 0.66m overall diameter (effective diameter for combustor and gasifier is 0.413m and 0.257m) to investigate the fluidization quality and compare it with the results obtained from the previous cold model of about 1.36 times smaller, but with the same compartmented ratio of 65:35. Different inert particles (river sand, quartz sand and alumina) were used, over a range of aspect ratios, for the aforementioned objective. The results showed that the fluidization quality in the gasifier has not been achieved and the degradation of fluidization quality in the combustor is still observed, notwithstanding the fact that the condition of the minimum allowable effective diameter has been met. The reduction of distributor free area, to increase the distributor pressure drop, showed a marginal effect on the quality. The effect of the minimum allowable effective diameter on fluidization quality in CFBG as well as the interplay of geometric and operational parameters require further studies be carried out. The fluidization quality of the binary mixture is also currently under investigation.
    Matched MeSH terms: Physiological Processes
  15. Sharifah Hanisah S.A. Aziz, Khairul Zaman Mohd Dahlan, Jalaluddin Harun
    MyJurnal
    At present, research in composite materials is being directed at using natural fibres instead of synthetic fibres. Kenaf which is extensively grown in the Far East including Malaysia, has been identified as a bast (stem) fibre with significant market potential. In this work, long and random kenaf fibres (non-woven mat form) were used in the as-received condition and alkalized with a 0.06M NaOH solution. They were combined with polypropylene thin sheets, sandwiched between layers of kenaf fibres and hot-pressed to form natural fibre composites. The mechanical properties of the composites were investigated to observe the effect of fibre alignment, fibre treatment and pre-irradiation method used. A general trend was observed whereby alkalized and long fibre composites gave higher flexural modulus and flexural strength compared with random mat and untreated fibres. The long fibre composites also gave a higher work of fracture. However, the correlation between fibre surface treatment and the work of fracture was less clear. Pre-irradiation on the polypropylene pellets and fibres before the composite is manufactured showed significant improvement on the flexural modulus and flexural strength. The bond performance test performed on the treated composites demonstrated good bonding and interfacial adhesion between the fibre and matrix. However, the method of moulding used need to be improved to optimize the performance of the composites.
    Matched MeSH terms: Physiological Processes
  16. Siswanto, Rita Muhamad, Dzolkhifli Omar, Elna Karmawati
    Trop Life Sci Res, 2009;20(1):-.
    MyJurnal
    Helopeltis antonii is the major pest affecting cashew plants in Indonesia and causes potential damage to the plant. The development of the population was influenced by the fecundity and fertility of their eggs. The effect of mating on the eggs’ fecundity and the fertility of H. antonii was studied. Laboratory studies at Wonogiri Estate Service in Ngadirojo District, Wonogiri, Indonesia investigated the sexual maturity, the influence of female to male sex ratio on the females’ fecundity and longevity, and the influence of mating frequency to fecundity and the eggs hatchability of H. antonii. The study reveals that H. antonii females and males are ready to mate when they are two days old. The number of eggs laid and the longevity of the females’ lives were not significantly affected by the sex ratio; however, female to male sex ratios of 2:1 and 1:2 tended to produce a greater number of eggs. The fecundity of the female was not significantly influenced by the number of times the female mated. Unmated females laid fewer eggs than females paired with a mature male. The study shows that females need to mate to produce fertile eggs.
    Matched MeSH terms: Physiological Processes
  17. Shahapuzi, N.S., Taip, F. S., Aziz, N., Ahmedov, A.
    MyJurnal
    The presence of airflow during heating process is expected to increase heat uniformity in a closed heating chamber. Circulation of hot air increases the percentage of convective heat transfer. In this study effects of airflow on oven temperature, cake temperature and several cake qualities were investigated. Experimental studies were conducted in convective oven using two different baking modes; with and without airflow. During baking, oven temperatures and internal cake temperature were measured, and images of cake expansion were captured. Results of the study showed that the presence of airflow could maintain the oven temperature within a small range of set point temperature. Temperature in the oven exhibited ±5.5°C fluctuation, approximately 3.5% overshoot that occurred continuously during baking with airflow. On the contrary, higher overshoot (ranging from 15 to 30%) was observed in oven temperature without airflow. Airflow also showed a significant effect (p
    Matched MeSH terms: Physiological Processes
  18. Yap, Wei Boon, Rina Anak Sujang
    MyJurnal
    There has been a significant increase in research on probiotics-associated health benefits in the last 20 years. Many studies carried out in vitro and clinically show that consumption of probiotics inhibits the growth of pathogenic microorganisms. Furthermore, the consumption of probiotics also enhances the host immune response and decreases the levels of carcinogenesis-inducing enzymes. These positive outcomes have led to the use of probiotics in prevention and treatment of infectious diseases like bacterial or antibiotic associated diarrhea, chronic inflammatory bowel diseases and colon cancer. This review summarises literature pertaining to mechanistic actions of probiotics in improving the well-being of hosts.
    Matched MeSH terms: Physiological Processes
  19. Rozita Hod, Duni Asmindar Ahmad, Ng, Chong Guan, Hatta Sidi
    ASEAN Journal of Psychiatry, 2011;12(1):3-13.
    MyJurnal
    Objective: To investigate the prevalence of Female Orgasmic Dysfunction (FOD) focusing on the orgasm domain among female patients attending PPUKM Psychiatric clinic. To compare the prevalence of orgasmic dysfunction between female patients on Escitalopram and on Fluoxetine therapy.
    Methods: A validated questionnaire for sexual function was used to assess orgasmic function. A total of 112 women aged between 24 and 57 participated in this study. The orgasmic dysfunction was compared between patients on selective serotonin reuptake inhibitors (SSRIs) fluoxetine and escitalopram.
    Results: The prevalence of female orgasmic dysfunction was 58.9% (33/56) among patients treated with Fluoxetine and 41.1% (23/56) among patients treated with Escitalopram. However, there was no statistically significant difference between these two treatment groups (p=0.059). The odds to have FOD among patients on higher dose of antidepressants was found to be higher compared to those patients who were on lower dose of antidepressants (Odds ratio 5.32, p= 0.001).
    Conclusion: There was no significant difference of Female Orgasmic Dysfunction between patients on Fluoxetine and Escitalopram.
    Study site: Psychiatric clinics, Pusat Perubatan Universiti Kebangsaan Malaysia (PPUKM), Kuala Lumpur, Malaysia
    Matched MeSH terms: Physiological Processes
  20. Tan AK, Faridah Hanom A
    Malays Fam Physician, 2010;5(3):115-118.
    PMID: 25606202 MyJurnal
    To describe a quick and simple diagnostic approach to monocular diplopia. Diplopia is a common visual complain in casualty departments, general practice clinics, neurologic clinics as well as ophthalmic clinics. Monocular diplopia, however, is uncommon. Many well established clinical examination methods are available to address diplopia. Some require special equipments which are not easily available or unfamiliar outside of ophthalmic clinic. We describe a simple two-minute diagnostic approach to monocular diplopia. Basic knowledge and understanding of simple clinical examination techniques enhances diagnostic skill and allow proper localization of underlying disorders.
    Matched MeSH terms: Physiological Processes
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links