Displaying publications 81 - 100 of 532 in total

Abstract:
Sort:
  1. The recent development of inverse vulcanized polysulfide as an alternative adsorbent for heavy metal removal in wastewater
    Nayeem A, Ali MF, Shariffuddin JH
    Environ Res, 2023 Jan 01;216(Pt 1):114306.
    PMID: 36191616 DOI: 10.1016/j.envres.2022.114306
    Inverse vulcanized polysulfides have been used as low-cost and effective adsorbents to remediate heavy metals in wastewater. Inverse vulcanization introduces sustainable polysulfide synthesis by solving the rapid desulfurization problem of unstable polysulfides, and provides superior performance compared to conventional commercial adsorbents. The review discussed the brief applications of the inverse vulcanized polysulfides to remove heavy metal wastewater and emphasized the modified synthesis processes for enhanced uptake ratios. The characteristics of polysulfide adsorbents, which play a vital role during the removal process are highlighted with a proper discussion of the interaction between metal ions and polysulfides. The review paper concludes with remarks on the future outlook of these low-cost adsorbents with high selectivity to heavy metals. These polysulfide adsorbents can be prepared using a wide variety of crosslinker monomers including organic hydrocarbons, cooking oils, and agro-based waste materials. They have shown good surface area and excellent metal-binding capabilities compared to the commercially available adsorbents. Proper postmodification processes have enabled the benefits of repetitive uses of the polysulfide adsorbents. The improved surface area obtained by appropriate choice of crosslinkers, modified synthesis techniques, and regeneration through post-modification has made inverse vulcanized polysulfides capable of removing.
    Matched MeSH terms: Waste Water
  2. Fulltext Prevalence and risk factors of childhood diarrhea among wastewater irrigating urban farming households in Addis Ababa
    Ali AS, Gari SR, Goodson ML, Walsh CL, Dessie BK, Ambelu A
    PLoS One, 2023;18(11):e0288425.
    PMID: 37939075 DOI: 10.1371/journal.pone.0288425
    INTRODUCTION: Childhood diarrhea is one of the major contributors to the morbidity of under-five children in Ethiopia. Although researchers determine the risk factors varyingly, the exposure route to the pathogens is usually complicated. This study aims to investigate the prevalence and risk factors of diarrhea among children under the age of five among wastewater irrigation farming households in Addis Ababa, Ethiopia.

    METHODS: Cross-sectional study was conducted among 402 farming households from November 2021 to February 2022. Data was collected using a face-to-face interviewer-administered questionnaire. Stata version 14 software was used to analyze data. Factors associated with the prevalence of diarrhea was identified using binary logistic regression. Multivariable analysis was carried out to determine an adjusted odds ratio at a confidence level of 95% and level of significance at 0.05.

    RESULTS: The overall prevalence of under-five children diarrheal cases was 22.3%. The odds of diarrhea are associated with a multitude of variables. Major wastewater-related determinants associated with diarrhea are body washing with irrigation water [AOR: 37.7, 95%CI (3.1, 358)], contaminated cloth with irrigation water [AOR:10.8,95%CI(0.6, 205)], use of protective clothing during farm work [28.9,95%CI (3.9, 215)], use of farm work cloths at home [AOR: 31.7, 95%CI (4.4, 226)], and bringing unwashed farm tools to home [94 (5.7, 1575)].

    CONCLUSION: The high prevalence of under-five children diarrheal disease among wastewater irrigation households was strongly associated with factors related to occupational exposure. Thus, to decrease childhood diarrheal among urban agriculture farmers, appropriate precautions need to be taken.

    Matched MeSH terms: Waste Water*
  3. Potential use of algae for the bioremediation of different types of wastewater and contaminants: Production of bioproducts and biofuel for green circular economy
    Alazaiza MYD, Albahnasawi A, Ahmad Z, Bashir MJK, Al-Wahaibi T, Abujazar MSS, et al.
    J Environ Manage, 2022 Dec 15;324:116415.
    PMID: 36206653 DOI: 10.1016/j.jenvman.2022.116415
    Remediation by algae is a very effective strategy for avoiding the use of costly, environmentally harmful chemicals in wastewater treatment. Recently, industries based on biomass, especially the bioenergy sector, are getting increasing attention due to their environmental acceptability. However, their practical application is still limited due to the growing cost of raw materials such as algal biomass, harvesting and processing limitations. Potential use of algal biomass includes nutrients recovery, heavy metals removal, COD, BOD, coliforms, and other disease-causing pathogens reduction and production of bioenergy and valuable products. However, the production of algal biomass using the variable composition of different wastewater streams as a source of growing medium and the application of treated water for subsequent use in agriculture for irrigation has remained a challenging task. The present review highlights and discusses the potential role of algae in removing beneficial nutrients from different wastewater streams with complex chemical compositions as a biorefinery concept and subsequent use of produced algal biomass for bioenergy and bioactive compounds. Moreover, challenges in producing algal biomass using various wastewater streams and ways to alleviate the stress caused by the toxic and high concentrations of nutrients in the wastewater stream have been discussed in detail. The technology will be economically feasible and publicly accepted by reducing the cost of algal biomass production and reducing the loaded or attached concentration of micropollutants and pathogenic microorganisms. Algal strain improvement, consortium development, biofilm formation, building an advanced cultivation reactor system, biorefinery concept development, and life-cycle assessment are all possible options for attaining a sustainable solution for sustainable biofuel production. Furthermore, producing valuable compounds, including pharmaceutical, nutraceutical and pigment contents generated from algal biomass during biofuel production, could also help reduce the cost of wastewater management by microalgae.
    Matched MeSH terms: Waste Water
  4. A mini-review on innovative strategies for simultaneous microbial bioremediation of toxic heavy metals and dyes from wastewater
    Haripriyan U, Arun J, Gopinath KP, Mythili R, Kim W, Govarthanan M
    Arch Microbiol, 2022 Dec 15;205(1):29.
    PMID: 36522563 DOI: 10.1007/s00203-022-03367-x
    Bioremediation of heavy metals and dyes is one of the emerging techniques globally as it is evident from the numerous publications made by various research groups. Biofilm-assisted bioremediation is one of the trending approaches as it facilitates negatively charged extracellular polymeric substances which makes the bacteria resistant to the toxic chemicals. Genetic engineering of microbes will make them unique in the bioremediation process. This mini-review concentrates on source and toxic effects of heavy metals and dyes on aqueous and living beings. Further, the genetic improvement strategies for effective bioremediation are described. However, the gap between practicability and real-time applicability needs to test with real-time wastewater in the industrial scale.
    Matched MeSH terms: Waste Water*
  5. Resource recovery from hydroponic wastewaters using microalgae-based biorefineries: A circular bioeconomy perspective
    Ajeng AA, Rosli NSM, Abdullah R, Yaacob JS, Qi NC, Loke SP
    J Biotechnol, 2022 Dec 10;360:11-22.
    PMID: 36272573 DOI: 10.1016/j.jbiotec.2022.10.011
    As the world's population grows, it is necessary to rethink how countries throughout the world produce food in order to replace the conventional and unsustainable agricultural techniques. Microalgae cultivation using a nutrient-rich solution from hydroponic systems not only presents a novel approach to solving problems pertaining to the impact of the discharges on the natural environment but also provides a plethora of other biotechnological applications particularly in the productions of high value-added products and plants growth stimulants, which can be potentially assimilated into the circular bioeconomy (CBE) in the hydroponic sector. In this review, the potential and practicability of microalgae to be merged into hydroponics CBE are reviewed. Overall, the integration of microalgal biorefineries in hydroponics systems can be realized after considering their Technology Readiness Level and System Readiness Level beforehand. Several suggestions on strains and hydroponics system improvement using existing biotechnological tools, Artificial Intelligence (AI) and nanobiotechnology in support of the CBE will be covered.
    Matched MeSH terms: Waste Water
  6. Microalgal remediation and valorisation of polluted wastewaters for zero-carbon circular bioeconomy
    Goveas LC, Nayak S, Vinayagam R, Loke Show P, Selvaraj R
    Bioresour Technol, 2022 Dec;365:128169.
    PMID: 36283661 DOI: 10.1016/j.biortech.2022.128169
    Overexploitation of natural resources to meet human needs has considerably impacted CO2 emissions, contributing to global warming and severe climatic change. This review furnishes an understanding of the sources, brutality, and effects of CO2 emissions and compelling requirements for metamorphosis from a linear to a circular bioeconomy. A detailed emphasis on microalgae, its types, properties, and cultivation are explained with significance in attaining a zero-carbon circular bioeconomy. Microalgal treatment of a variety of wastewaters with the conversion of generated biomass into value-added products such as bio-energy and pharmaceuticals, along with agricultural products is elaborated. Challenges encountered in large-scale implementation of microalgal technologies for low-carbon circular bioeconomy are discussed along with solutions and future perceptions. Emphasis on the suitability of microalgae in wastewater treatment and its conversion into alternate low-carbon footprint bio-energies and value-added products enforcing a zero-carbon circular bioeconomy is the major focus of this review.
    Matched MeSH terms: Waste Water
  7. A study on the uptake of methylene blue by biodegradable and eco-friendly carboxylated starch grafted polyvinyl pyrrolidone
    Haq F, Farid A, Ullah N, Kiran M, Khan RU, Aziz T, et al.
    Environ Res, 2022 Dec;215(Pt 1):114241.
    PMID: 36100100 DOI: 10.1016/j.envres.2022.114241
    This study is based on the removal of methylene blue (MB) from aqueous solution by cost effective and biodegradable adsorbent carboxymethyl starch grafted polyvinyl pyrolidone (Car-St-g-PVP). The Car-St-g-PVP was synthesized by grafting vinyl pyrolidone onto carboxymethyl starch by free radical polymerization reaction. The structure and different properties of Car-St-g-PVP were determined by 1H NMR, FT-IR, XRD, TGA and SEM. A series of batch experiments were conducted for the removal of MB, The adsorption affecting factors such as temperature, contact time, initial concentration of MB dye, dose of Car-St-g-PVP and pH were studied in detail. The other parameters like the thermodynamic study, kinetics and isothermal models were fitted to the experimental data. The results showed that pseudo 2nd order kinetics and Langmuir's adsorption isotherms were best fitted to experimental data with regression coefficient R2 viz. 0.99 and 0.97. The kinetic study showed that the adsorption mechanism favored chemisorption. The Gibbs free energy (ΔG°) for the adsorption process was found to be -7.31 kJ/mol, -8.23 kJ/mol, -9.00 kJ/mol and -10.10 kJ/mol at 25 °C, 35 °C, 45 °C and 55 °C respectively. The negative values of ΔG° suggested the spontaneous nature of the adsorption process. Similarly, the positive values of entropy (ΔS°) and enthalpy (ΔH°) 91.27 J/k.mol and 19.90 kJ/mol showed the increasing randomness and endothermic nature of the adsorption process. The value of separation factor (RL) was found to be less than one (RL 
    Matched MeSH terms: Waste Water
  8. Anammox process for aquaculture wastewater treatment: operational condition, mechanism, and future prospective
    Ismail IN, Taufik M, Umor NA, Norulhuda MR, Zulkarnaini Z, Ismail S
    Water Sci Technol, 2022 Dec;86(12):3093-3112.
    PMID: 36579872 DOI: 10.2166/wst.2022.403
    Treatment of ammonia- and nitrate-rich wastewater, such as that generated in the aquaculture industry, is important to prevent environmental pollution. The anaerobic ammonium oxidation (anammox) process has been reported as a great alternative in reducing ammoniacal nitrogen concentration in aquaculture wastewater treatment compared to conventional treatment systems. This paper will highlight the impact of the anammox process on aquaculture wastewater, particularly in the regulation of ammonia and nitrogen compounds. The state of the art for anammox treatment systems is discussed in comparison to other available treatment methods. While the anammox process is viable for the treatment of aquaculture wastewater, the efficiency of nitrogen removal could be further improved through the proper use of anammox bacteria, operating conditions, and microbial diversity. In conclusion, a new model of the anammox process is proposed in this review.
    Matched MeSH terms: Waste Water*
  9. Fulltext Influence of Salts on the Photocatalytic Degradation of Formic Acid in Wastewater
    Che Abdul Rahim AN, Yamada S, Bonkohara H, Mestre S, Imai T, Hung YT, et al.
    Int J Environ Res Public Health, 2022 Nov 26;19(23).
    PMID: 36497814 DOI: 10.3390/ijerph192315736
    Conventional wastewater treatment technologies have difficulties in feasibly removing persistent organics. The photocatalytic oxidation of these contaminants offers an economical and environmentally friendly solution. In this study, TiO2 membranes and Ag/TiO2 membranes were prepared and used for the decomposition of dissolved formic acid in wastewater. The photochemical deposition of silver on a TiO2 membrane improved the decomposition rate. The rate doubled by depositing ca. 2.5 mg of Ag per 1 g of TiO2. The influence of salinity on formic acid decomposition was studied. The presence of inorganic salts reduced the treatment performance of the TiO2 membranes to half. Ag/TiO2 membranes had a larger reduction of ca. 40%. The performance was recovered by washing the membranes with water. The anion adsorption on the membrane surface likely caused the performance reduction.
    Matched MeSH terms: Waste Water*
  10. Contemporary application of microbubble technology in water treatment
    Nair SS, Pinedo-Cuenca R, Stubbs T, Davis SJ, Ganesan PB, Hamad F
    Water Sci Technol, 2022 Nov;86(9):2138-2156.
    PMID: 36378171 DOI: 10.2166/wst.2022.328
    Microbubble (MB) technology constitutes a suite of promising low-cost technologies with potential applications in various sectors. Microbubbles (MBs) are tiny gas bubbles with diameters in the micrometre range of 10-100 μm. Along with their small size, they share special characteristics like slow buoyancy, large gas-liquid interfacial area and high mass-transfer efficiency. Initially, the review examines the key dissimilarities among the different types of microbubble generators (MBG) towards economic large-scale production of MBs. The applications of MBs to explore their effectiveness at different stages of wastewater treatment extending from aeration, separation/ flotation, ozonation, disinfection and other processes are investigated. A summary of the recent advances of MBs in real and synthetic wastewater treatment, existing research gaps, and limitations in upscaling of the technology, conclusion and future recommendations is detailed. A critical analysis of the energetics and treatment cost of combined approaches of MB technology with other advanced oxidation processes (AOPs) is carried out highlighting the potential applicability of hybrid technology in large-scale wastewater treatment.
    Matched MeSH terms: Waste Water
  11. Fulltext A comprehensive review of various approaches for treatment of tertiary wastewater with emerging contaminants: what do we know?
    Zahmatkesh S, Bokhari A, Karimian M, Zahra MMA, Sillanpää M, Panchal H, et al.
    Environ Monit Assess, 2022 Oct 14;194(12):884.
    PMID: 36239735 DOI: 10.1007/s10661-022-10503-z
    In the last few decades, environmental contaminants (ECs) have been introduced into the environment at an alarming rate. There is a risk to human health and aquatic ecosystems from trace levels of emerging contaminants, including hospital wastewater (HPWW), cosmetics, personal care products, endocrine system disruptors, and their transformation products. Despite the fact that these pollutants have been introduced or detected relatively recently, information about their characteristics, actions, and impacts is limited, as are the technologies to eliminate them efficiently. A wastewater recycling system is capable of providing irrigation water for crops and municipal sewage treatment, so removing ECs before wastewater reuse is essential. Water treatment processes containing advanced ions of biotic origin and ECs of biotic origin are highly recommended for contaminants. This study introduces the fundamentals of the treatment of tertiary wastewater, including membranes, filtration, UV (ultraviolet) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Next, a detailed description of recent developments and innovations in each component of the emerging contaminant removal process is provided.
    Matched MeSH terms: Waste Water/analysis
  12. Gadolinium based contrast agents (GBCAs): Uniqueness, aquatic toxicity concerns, and prospective remediation
    Oluwasola IE, Ahmad AL, Shoparwe NF, Ismail S
    J Contam Hydrol, 2022 Oct;250:104057.
    PMID: 36130428 DOI: 10.1016/j.jconhyd.2022.104057
    The current toxicity concerns of gadolinium-based contrast agents (GBCAs) have birthed the need to regulate and, sometimes restrict its clinical administration. However, tolerable concentration levels of Gd in the water sector have not been set. Therefore, the detection and speedy increase of the anthropogenic Gd-GBCAs in the various water bodies, including those serving as the primary source of drinking water for adults and children, is perturbing. Nevertheless, the strongly canvassed risk-benefit considerations and superior uniqueness of GBCAs compared to the other ferromagnetic metals guarantees its continuous administration for Magnetic resonance imaging (MRI) investigations regardless of the toxicity concerns. Unfortunately, findings have shown that both the advanced and conventional wastewater treatment processes do not satisfactorily remove GBCAs but rather risk transforming the chelated GBCAs to their free ionic metal (Gd 3+) through inadvertent degradation processes. This unintentional water processing-induced GBCA dechelation leads to the intricate  pathway for unintentional human intake of Gd ion. Hence exposure to its probable ecotoxicity and several reported inimical effects on human health such as; digestive symptoms, twitching or weakness, cognitive flu, persistent skin diseases, body pains, acute renal and non-renal adverse reactions, chronic skin, and eyes changes. This work proposed an economical and manageable remediation technique for the potential remediation of Gd-GBCAs in wastewater, while a precautionary limit for Gd in public water and commercial drinks is advocated.
    Matched MeSH terms: Waste Water
  13. Fulltext Critical role of Hyssop plant in the possible transmission of SARS-CoV-2 in contaminated human Feces and its implications for the prevention of the virus spread in sewage
    Zahmatkesh S, Klemeš JJ, Bokhari A, Wang C, Sillanpaa M, Hasan M, et al.
    Chemosphere, 2022 Oct;305:135247.
    PMID: 35688196 DOI: 10.1016/j.chemosphere.2022.135247
    The significant issue affecting wastewater treatment is human faeces containing SARS-CoV-2. SARS-CoV-2, as a novel coronavirus, has expanded globally. While the current focus on the COVID-19 epidemic is rightly on preventing direct transmission, the risk of secondary transmission via wastewater should not be overlooked. Many researchers have demonstrated various methods and tools for preventing and declining this virus in wastewater treatment, especially for SARS-CoV-2 in human faeces. This research reports two people tested for 30 d, with written consent, at Mosa-Ebne-Jafar Hospital of Quchan, Iran, from September 1st to October 9th, 2021. The two people's conditions are the same. The Hyssop plant was used, which boosts the immune system's effectiveness and limonene, rosemary, caffeic acids and flavonoids, all biologically active compounds in this plant, cause improved breathing problems, colds, and especially for SARS-CoV-2. As a result, utilising the Hyssop plant can help in reducing SARS-CoV-2 in faeces. This plant's antioxidant properties effectively reduce SARS-CoV-2 in faeces by 30%; nevertheless, depending on the patient's condition. This plant is also beneficial for respiratory and digestive health.
    Matched MeSH terms: Waste Water
  14. Overcoming the Fukushima Wastewater Crisis: What the Japanese Authorities Could Do to Address Opposing Views
    Ng KH, Yoong D, Gong J
    Health Phys, 2022 Jun 01;122(6):696-704.
    PMID: 35486926 DOI: 10.1097/HP.0000000000001548
    In April 2021, the Japanese authorities' announcement of their decision to release processed wastewater from the damaged Fukushima Daiichi nuclear power plant into the Pacific Ocean over 30 y, beginning in 2023, triggered strong domestic and international opposition. Failure to handle this situation tactfully can lead to public disorder, civil disobedience, loss of trust in the authorities, and even diplomatic sanctions. In this article, we explain the underlying reasons behind this resistance, and we offer some strategic methods that the Japanese authorities can deploy to address opposing views and overcome the Fukushima wastewater crisis.
    Matched MeSH terms: Waste Water
  15. Local fruit wastes driven benthic microbial fuel cell: a sustainable approach to toxic metal removal and bioelectricity generation
    Yaqoob AA, Guerrero-Barajas C, Ibrahim MNM, Umar K, Yaakop AS
    Environ Sci Pollut Res Int, 2022 May;29(22):32913-32928.
    PMID: 35020140 DOI: 10.1007/s11356-021-17444-z
    The present work focused on the utilization of three local wastes, i.e., rambutan (Nephelium lappaceum), langsat (Lansium parasiticum), and mango (Mangifera indica) wastes, as organic substrates in a benthic microbial fuel cell (BMFC) to reduce the cadmium and lead concentrations from synthetic water. Out of the three wastes, the mango waste promoted a maximum current density (87.71 mA/m2) along with 78% and 80% removal efficiencies for Cd2+ and Pb2+, respectively. The bacterial identification proved that Klebsiella pneumoniae, Enterobacter, and Citrobacter were responsible for metal removal and energy generation. In the present work, the BMFC mechanism, current challenges, and future recommendations are also enclosed.
    Matched MeSH terms: Waste Water
  16. Waste-to-Resource: New application of modified mine silicate waste to remove Pb2+ ion and methylene blue dye, adsorption properties, mechanism of action and recycling
    Ghaedi S, Seifpanahi-Shabani K, Sillanpää M
    Chemosphere, 2022 Apr;292:133412.
    PMID: 34974049 DOI: 10.1016/j.chemosphere.2021.133412
    Currently, heavy metals and dyes are some of the most critical pollutants in the aquatic environment. So, in this paper "waste-to-resource conversion", as a new application of modified mine silicate waste to remove Pb2+ ion and methylene blue (MB) dye, adsorption properties, mechanism of action and recycling were studied. Silicate wastes are located in the alteration zone and the margin of molybdenum ore, these wastes are under the influence of hydrothermal solutions which are impregnated with iron and manganese ions. Hence, acid and base modifications have been commonly used. So, in this study, a highly porous nanostructure of modified silicate waste was used to remove MB and Pb2+ ion, in subsequent to our previous study on the application of the raw material of the same in the removal of malachite green. Acid, base, and acid/base treatments were used to activate and modify the adsorbent. Results show a significantly higher potential of modified adsorbent in the removal of MB and Pb2+ compared to the raw material. According to the isotherm and kinetic studies for MB and Pb2+ the Langmuir and Temkin and pseudo-second-order models were investigated with experimental data. Modified nanomaterial was used for several adsorption and desorption processes, without a significant decrease in the capability of the adsorbent in the removal of MB and Pb2+ pollutants. Leached iron and manganese ions (as production of modification) are deposited in the form of sludge using a simple pH adjustment and precipitation process and can be used to recover iron and manganese metals in the long run. The comparison of monolayer adsorption capacity using for Pb2+ ion and MB dye are as ((untreated SW: 29.41, 1.05); (NaOH treated: 21.74, 100); (Nitric Acid treated: 16.67, 142.86); (Citric Acid treated: 40, 125); (Nitric/Citric Acids treated: 15.63, 111.11) and (Nitric/Citric Acids/NaOH treated: 15.15, 83.33)), respectively. Higher adsorption capacity and re-generable properties of this adsorbent suggest the usage of this natural and abundant mine waste to treat wastewater containing toxic elements and dyes.
    Matched MeSH terms: Waste Water
  17. Comparative performance of Scirpus grossus for phytotreating mixed dye wastewater in batch and continuous pilot subsurface constructed wetland systems
    Almaamary EAS, Abdullah SRS, Ismail N', Idris M, Kurniawan SB, Imron MF
    J Environ Manage, 2022 Apr 01;307:114534.
    PMID: 35065382 DOI: 10.1016/j.jenvman.2022.114534
    Dye is one of the pollutants found in water bodies because of the increased growth of the textile industry. In this study, Scirpus grossus was planted inside a constructed wetland to treat mixed dye (methylene blue and methyl orange)-containing wastewater under batch and continuous modes. The plants were exposed to various concentrations (0, 50, 75, and 100 mg/L) of mixed dye for 72 days (with hydraulic retention time of 7 days for the continuous system). Biological oxygen demand, chemical oxygen demand, total organic carbon, pH, temperature, ionic content, and plant growth parameters were measured. Results showed that S. grossus can withstand all the tested dye concentrations until the end of the treatment period. Color removal efficiencies of 86, 84, and 75% were obtained in batch mode, whereas 90%, 85%, and 79% were obtained in continuous mode for 50, 75, and 100 mg/L dye concentrations, respectively. Fourier-transform infrared analysis confirmed the transformation of dye compounds after treatment and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis showed that most of the intermediate compounds were not absorbed into plants but adsorbed onto the surface of the root structure.
    Matched MeSH terms: Waste Water
  18. Fulltext A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal
    Oruganti RK, Katam K, Show PL, Gadhamshetty V, Upadhyayula VKK, Bhattacharyya D
    Bioengineered, 2022 Apr;13(4):10412-10453.
    PMID: 35441582 DOI: 10.1080/21655979.2022.2056823
    The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.
    Matched MeSH terms: Waste Water/chemistry
  19. Microalgal-based biochar in wastewater remediation: Its synthesis, characterization and applications
    Law XN, Cheah WY, Chew KW, Ibrahim MF, Park YK, Ho SH, et al.
    Environ Res, 2022 03;204(Pt A):111966.
    PMID: 34450156 DOI: 10.1016/j.envres.2021.111966
    Microalgae are drawing attentions among researchers for their biorefinery use or value-added products. The high production rate of biomasses produced are attractive for conversion into volatile biochar. Torrefaction, pyrolysis and hydrothermal carbonization are the recommended thermochemical conversion techniques that could produce microalgal-based biochar with desirable physiochemical properties such as high surface area and pore volume, abundant surface functional groups, as well as functionality such as high adsorption capacity. The characterizations of the biochar significantly influence the mechanisms in adsorption of pollutants from wastewaters. Specific adsorption of the organic and inorganic pollutants from the effluent are reviewed to examine the adsorption capacity and efficiency of biochar derived from different microalgae species. Last but not least, future remarks over the challenges and improvements are discussed accordingly. Overall, this review would discuss the synthesis, characterization and application of the microalgal-based biochar in wastewater.
    Matched MeSH terms: Waste Water*
  20. Sustainable approaches for nickel removal from wastewater using bacterial biomass and nanocomposite adsorbents: A review
    Noman E, Al-Gheethi A, Saphira Radin Mohamed RM, Al-Sahari M, Hossain MS, Vo DN, et al.
    Chemosphere, 2022 Mar;291(Pt 1):132862.
    PMID: 34774612 DOI: 10.1016/j.chemosphere.2021.132862
    In this article, the nickel (Ni2+) ions removal from the wastewater is reviewed. Adsorption is widely used to remove Ni2+ ions from waters and wastewaters. The usage of biomass is becoming more common for Ni2+ ions removal, while the commercial activated carbon from different agriculture wastes is preferred as an adsorbent for Ni2+ ion removal. The present review aimed to organise the available information regarding sustainable approaches for Ni2+ ions removal from water and wastewaters. These include adsorption by nanoparticles, bacterial biomass, and activated carbon from agriculture wastes, since they are the most common used for the Ni2+ ions removal. The bacterial and agricultural waste adsorbents exhibited high efficiency with a renewable source of biomass for Ni2+ ion removal. The biosorption capacity of the Ni2+ ions by the bacterial biomass range from 5.7 to 556 mg/g, while ranging from 5.8 to 150 mg/g by the activated carbon from different organic materials. The biosorption capacity of the nanocomposite adsorbents might reach to 400 mg/g. It appeared that the elimination of nickel ions need a selective biomass adsorbent such as the tolerant bacterial cells biomass which acts as a store for Ni2+ ion accumulations as a results for the active and passive transportation of the Ni2+ ions through the bacterial cell membrane.
    Matched MeSH terms: Waste Water
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links