Displaying publications 81 - 100 of 276 in total

Abstract:
Sort:
  1. Fulltext Latest recommendations for dental radiography in general dental practice
    Purmal, Kathiravan, Nambiar, Phrabhakaran
    Malaysian Dental Journal, 2008;29(2):104-112.
    MyJurnal
    Radiology is important in the diagnostic assessment, treatment and monitoring progress of patients having dental and maxillofacial diseases. The central question in dental radiology is whether there is any risk with regard to low doses of radiation and what are the necessary protection needed to prevent any hazardous outcome with X-raying. With the emergence of the new millennium, major changes are happening in the field of science and technology. More efficient equipments are being discovered and more researches are being conducted to elicit better understanding of the radiation process and its effect on the human health. This article will review the latest guidelines for proper radiographic practice from the USA and Europe. It will address topics like the risks from dental radiography, selection criteria, protection for patients and staff, improvement to X-ray equipments, room dimensions and lead lining requirements. We have limited our research to intraoral, panoramic and cephalometric radiographs because these are the radiographs or images that are commonly taken in the general practice setting. (Copied from article).
    Matched MeSH terms: X-Rays
  2. Discrimination of dopamine by an electrode modified with negatively charged manganese dioxide nanoparticles decorated on a poly(3,4 ethylenedioxythiophene)/reduced graphene oxide composite
    Promsuwan K, Soleh A, Saisahas K, Saichanapan J, Kanatharana P, Thavarungkul P, et al.
    J Colloid Interface Sci, 2021 Sep;597:314-324.
    PMID: 33872888 DOI: 10.1016/j.jcis.2021.03.162
    A unique nanocomposite was fabricated using negatively charged manganese dioxide nanoparticles, poly (3,4-ethylenedioxythiophene) and reduced graphene oxide (MnO2/PEDOT/rGO). The nanocomposite was deposited on a glassy carbon electrode (GCE) functionalized with amino groups. The modified GCE was used to electrochemically detect dopamine (DA). The surface morphology, charge effect and electrochemical behaviours of the modified GCE were characterized by scanning electron microscopy, energy dispersive X-ray analysis (EDX), cyclic voltammetry and electrochemical impedance spectroscopy, respectively. The MnO2/PEDOT/rGO/GCE exhibited excellent performance towards DA sensing with a linear range between 0.05 and 135 µM with a lowest detection limit of 30 nM (S/N = 3). Selectivity towards DA was high in the presence of high concentrations of the typical interferences ascorbic acid and uric acid. The stability and reproducibility of the electrode were good. The sensor accurately determined DA in human serum. The synergic effect of the multiple components of the fabricated nanocomposite were critical to the good DA sensing performance. rGO provided a conductive backbone, PEDOT directed the uniform growth of MnO2 and adsorbed DA via pi-pi and electrostatic interaction, while the negatively charged MnO2 provided adsorption and catalytic sites for protonated DA. This work produced a promising biosensor that sensitively and selectively detected DA.
    Matched MeSH terms: X-Rays
  3. Fulltext The study of nanosized semiconducting Nb doped Y-ZrO2
    Prastomo, Niki, Lockman, Zainovia, Ahmad Fauzi Mohd Noor, Ahmad Nuruddin, Matsuda, Atsunori
    Journal of Nuclear and Related Technologies, 2007;2007(1):149-154.
    MyJurnal
    Tetragonal Y2O3 stabilized Zirconia (t-Y-ZrO2) powders were doped with Nb2O5 to seek a possibility if electronics doping would enhance the electronics conductivity of the insulating oxide. In this work Y2O3 was added as a stabilizer to produce tetragonal ZrO2 whereas Nb2O5 was added for the electronic doping. Several compositions of powders were prepared by thermal decomposition method and were post annealed at different temperatures. Precursor solutions were prepared from the mixture of zirconyl nitrate, yttrium nitrate and niobium tartarate as well as TEA (triethanolamine). The mixed solution were evaporated, pyrolysed and calcined to produce nanosized powders. The phase formation of the as-made powders was investigated by x-ray diffractometer. The additions of 7% Y2O3 were found to stabilize the tetragonal phase of zirconia.
    The addition of Nb2O5 did not alter the stability of the tetragonal phase but it was found that the conductivity of the material has changed. The band gap as measured by the UV-Visible Spectrometer gave a value in the range of 2.97 to 5.01 eV. XRD was also used to deduce the crystallite size (by using Scherer’s equation) and transmission electron microcopy was used to view the particle sizes and shapes. The Nb doped t-Y-ZrO2 prepared in this work was to be nanosized crystal with size ranges from 7 nm to 15 nm.
    Matched MeSH terms: X-Rays
  4. Fulltext Morphological Change of Heat Treated Bovine Bone: A Comparative Study
    Pramanik S, Hanif ASM, Pingguan-Murphy B, Abu Osman NA
    Materials (Basel), 2012 Dec 21;6(1):65-75.
    PMID: 28809294 DOI: 10.3390/ma6010065
    In this work, untreated bovine cortical bones (BCBs) were exposed to a range of heat treatments in order to determine at which temperature the apatite develops an optimum morphology comprising porous nano hydroxyapatite (nanoHAp) crystals. Rectangular specimens (10 mm × 10 mm × 3-5 mm) of BCB were prepared, being excised in normal to longitudinal and transverse directions. Specimens were sintered at up to 900 °C under ambient pressure in order to produce apatites by two steps sintering. The samples were characterized by thermogravimetric analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM) attached to an energy-dispersive X-ray spectroscopy detector. For the first time, morphology of the HAp particles was predicted by XRD, and it was verified by SEM. The results show that an equiaxed polycrystalline HAp particle with uniform porosity was produced at 900 °C. It indicates that a porous nanoHAp achieved by sintering at 900 °C can be an ideal candidate as an in situ scaffold for load-bearing tissue applications.
    Matched MeSH terms: X-Rays
  5. Characteristics and performance of a mesoporous cerium-aluminum-silver mixed oxide for removal of methyl Violet Dye
    Phatai P, Srisomang R
    Sains Malaysiana, 2016;45:1477-1485.
    In this study, the adsorption efficiency of methyl violet (MV) dye onto Ce0.3Al0.7 and Ce0.3Al0.7Agx (x = 0.1, 0.3 & 0.5) mixed oxides was investigated. The properties of mixed oxide were determined by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), N2 adsorption-desorption isotherm, diffuse reflectance UV-vis spectroscopy (UV-vis DRS) and X-ray absorption near edge structure (XANES). Characterization showed that synthesized mixed oxide with fluorite has a pure cubic structure of a mesoporous nature and a small grain size with rough surface. Batch adsorption experiments were used to study parameters including contact time and initial dye concentration. The results showed that these parameters affected the degree of MV dye adsorption. The dye adsorption of mixed oxides attained equilibrium at 120 min. The equilibrium adsorption data were analyzed using Langmuir, Freundlich and Temkin isotherms. The adsorption behavior of MV dye onto Ce0.3Al0.7 was found to follow the Langmuir isotherm (R2 = 0.9951), providing a maximum monolayer adsorptive capacity of 2.35 mg/g. Alternatively, the adsorption of MV dye onto Ce0.3Al0.7Ag0.1 (R2 = 0.7839), Ce0.3Al0.7Ag0.3 (R2 = 0.9301) and Ce0.3Al0.7Ag0.5 (R2 = 0.9396) followed the Freundlich isotherm. The possible adsorption mechanisms of MV dyes onto the Ce0.3Al0.7 and Ce0.3Al0.7Agx were also discussed.
    Matched MeSH terms: X-Rays
  6. Fulltext Pulmonary Embolism Masquerading as Severe Pneumonia: A Case Report
    Payus AO, Rajah R, Febriany DC, Mustafa N
    Open Access Maced J Med Sci, 2019 Feb 15;7(3):396-399.
    PMID: 30834009 DOI: 10.3889/oamjms.2019.114
    BACKGROUND: De novo pulmonary embolism (DNPE) is a term used when pulmonary embolism (PE) occur in the absence of deep vein thrombosis (DVT). Most DNPE cases occur in a patient who had a recent injury to the chest.

    CASE PRESENTATION: However, here we report a case of DNPE with a slightly different presentation where there is no preceding trauma and has symptoms that mimic severe pneumonia. He presented with high fever, dyspnoea and pleuritic chest pain. Despite on 10 L of oxygen supplementation via high flow mask and already given bolus intravenous antibiotic, the patient still tachypnoeic and was persistently in type I respiratory failure. His chest X-ray showed consolidative changes. Upon further investigation revealed no evidence of DVT on Doppler ultrasound and normal D-dimer level. Due to the high index of suspicion by the attending physician, PE was suspected and later confirmed with computed tomography pulmonary angiography scan. He was successfully treated with anticoagulation therapy. The objective of this case report is to share the difficult experience of diagnosing PE when the presentation highly atypical and mimics severe pneumonia.

    CONCLUSION: And with such a masquerading presentation, one can easily miss the diagnosis. To the best of our knowledge, there are very few similar cases reported.

    Matched MeSH terms: X-Rays
  7. (2E)-1-(5-Chlorothiophen-2-yl)-3-{4-[(E)-2-phenylethenyl]phenyl}prop-2-en-1-one: Synthesis, XRD, FT-IR, Raman and DFT studies
    Parlak C, Ramasami P, Kumar CS, Tursun M, Quah CK, Rhyman L, et al.
    Spectrochim Acta A Mol Biomol Spectrosc, 2015 Oct 5;149:385-95.
    PMID: 25974671 DOI: 10.1016/j.saa.2015.04.022
    A novel (2E)-1-(5-chlorothiophen-2-yl)-3-{4-[(E)-2-phenylethenyl]phenyl}prop-2-en-1-one [C21H15ClOS] compound has been synthesized and its structure has been characterized by FT-IR, Raman and single-crystal X-ray diffraction techniques. The conformational isomers, optimized geometric parameters, normal mode frequencies and corresponding vibrational assignments of the compound have been examined by means of HF, MP2, BP86, BLYP, BMK, B3LYP, B3PW91, B3P86 and M06-2X functionals. Reliable vibrational assignments and molecular orbitals have been investigated by the potential energy distribution and natural bonding orbital analyses, respectively. The compound crystallizes in the triclinic space group P-1 with the cis-trans-trans form. There is a good agreement between the experimentally determined structural parameters and vibrational frequencies of the compound and those predicted theoretically using the density functional theory with the BLYP and BP86 functionals.
    Matched MeSH terms: X-Rays
  8. Fulltext Tuberculosis of the skull mimicking multiple myeloma
    Pan KL, Zulkarnaen M
    Med J Malaysia, 2014 Aug;69(4):197-8.
    PMID: 25500853 MyJurnal
    There is a resurgence of tuberculosis globally but lesions affecting the skull are rare. Cases reported are of single, focal lesions as seen on plain x-rays. We report a 34 yearold patient with tuberculosis of the skull where multiple punched out lesions are seen, mimicking that of multiple myeloma.
    Matched MeSH terms: X-Rays
  9. Fulltext Physicochemical Characterization, Molecular Docking, and In Vitro Dissolution of Glimepiride-Captisol Inclusion Complexes
    Pal A, Roy S, Kumar A, Mahmood S, Khodapanah N, Thomas S, et al.
    ACS Omega, 2020 Aug 18;5(32):19968-19977.
    PMID: 32832751 DOI: 10.1021/acsomega.0c01228
    This present study investigated the effect of Captisol, a chemically modified cyclodextrin, on the in vitro dissolution of glimepiride. We prepared glimepiride-Captisol complexes of different mass ratios (1:1, 1:2, and 1:3 w/w) by a physical mixing or freeze-drying technique, and found that complexation with Captisol enhanced the water solubility of glimepiride. Molecular docking and dynamic simulation predicted complex formation; at the same time, Fourier transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffractometry, and scanning electron microscope indicated molecular interactions that support complexation. We also found that an inclusion complex was better than a physical mixture in enhancing the complexation of glimepiride with Captisol and enhancing water solubility. Phase solubility study of the glimepiride-Captisol complex showed an AL-type profile, implying the formation of a 1:1 inclusion complex. The study also revealed that pH influenced the stability of the complex because the stability constant of the glimepiride-Captisol complex was higher in distilled water of pH ∼6.0 than in phosphate buffer of pH 7.2.
    Matched MeSH terms: X-Rays
  10. Fulltext Effect of er doping into BaTiO3 thin films: a nano-structural study
    Ooi, Z.V., Saif, A.A., Poopalan, P.
    Malaysian Journal of Microscopy, 2015;11(1):89-93.
    MyJurnal
    Sol-gel barium titanate (BaTiO3) and erbium doped barium titanate (Er-BaTiO3) were deposited on SiO2/Si substrates. The phase and crystallinity of the thin films were identified using x-ray diffractometer (XRD). The effect of Er dopant into BaTiO3 thin film on its grain size and surface roughness was studied using atomic force microscope (AFM) in tapping mode. XRD patterns revealed that the films were crystallized with perovskite structure. At the same time, it was shown that introducing Er dopant into BaTiO3 thin film caused the dominant peak to shift towards higher angle. AFM micrographs indicated that the films had well distributed grains, dense and crack-free surface. In general, substitution of Er dopant into Ba-site reduced the grain sizes and roughness parameter of the BaTiO3 which was attributed to the smaller ionic radius of Er.
    Matched MeSH terms: X-Rays
  11. Fulltext Physicochemical Characterization of Bilayer Hybrid Nanocellulose-Collagen as a Potential Wound Dressing
    Ooi KS, Haszman S, Wong YN, Soidin E, Hesham N, Mior MAA, et al.
    Materials (Basel), 2020 Sep 30;13(19).
    PMID: 33007893 DOI: 10.3390/ma13194352
    The eminent aim for advance wound management is to provide a great impact on the quality of life. Therefore, an excellent strategy for an ideal wound dressing is being developed that eliminates certain drawbacks while promoting tissue regeneration for the prevention of bacterial invasion. The aim of this study is to develop a bilayer hybrid biomatrix of natural origin for wound dressing. The bilayer hybrid bioscaffold was fabricated by the combination of ovine tendon collagen type I and palm tree-based nanocellulose. The fabricated biomatrix was then post-cross-linked with 0.1% (w/v) genipin (GNP). The physical characteristics were evaluated based on the microstructure, pore size, porosity, and water uptake capacity followed by degradation behaviour and mechanical strength. Chemical analysis was performed using energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectrophotometry (FTIR), and X-ray diffraction (XRD). The results demonstrated a uniform interconnected porous structure with optimal pore size ranging between 90 and 140 μm, acceptable porosity (>70%), and highwater uptake capacity (>1500%). The biodegradation rate of the fabricated biomatrix was extended to 22 days. Further analysis with EDX identified the main elements of the bioscaffold, which contains carbon (C) 50.28%, nitrogen (N) 18.78%, and oxygen (O) 30.94% based on the atomic percentage. FTIR reported the functional groups of collagen type I (amide A: 3302 cm-1, amide B: 2926 cm-1, amide I: 1631 cm-1, amide II: 1547 cm-1, and amide III: 1237 cm-1) and nanocellulose (pyranose ring), thus confirming the presence of collagen and nanocellulose in the bilayer hybrid scaffold. The XRD demonstrated a smooth wavy wavelength that is consistent with the amorphous material and less crystallinity. The combination of nanocellulose with collagen demonstrated a positive effect with an increase of Young's modulus. In conclusion, the fabricated bilayer hybrid bioscaffold demonstrated optimum physicochemical and mechanical properties that are suitable for skin wound dressing.
    Matched MeSH terms: X-Rays
  12. Fulltext A case of missed giant bullae emphysema diagnosed as pneumothorax
    Ong, S.F., Nik Azlan, N.M.
    Medicine & Health, 2017;12(1):90-93.
    MyJurnal
    We report a case of a giant bullous emphysema misdiagnosed as a pneumothorax. A 18-year-old chronic smoker presented with right sided chest pain and dyspnoea. Initial respiratory rate was 35 /min, blood pressure was 136/90 mmHg, heart rate 80/min and SpO2 was 98% on room air. Clinical examination revealed reduced right air entry and left trachea deviation. Chest X-ray helped to arrive at a diagnosis of pneumothorax. Needle aspiration was then performed followed by a chest tube thoracostomy because of no improvement. Massive amount of blood was drained and patient deteriorated further. CT thorax revealed a right haemopneumothorax with multiple bullaes. Patient was rushed to OT for emergency thoracotomy for stapling of the ruptured bullae. Giant bullous emphysema can mimic pneumothorax and physician must be vigilant if draining a suspected pneumothorax.
    Keywords: emphysema, haemopneumothorax, thoracostomy, thorax
    Matched MeSH terms: X-Rays
  13. Chemically modified multi-walled carbon nanotubes (MWCNTs) with anchored acidic groups
    Nuruzatulifah Bt Asari @ Mansor, Tessonnier JP, Rinaldi A, Reiche S, Kutty M
    Sains Malaysiana, 2012;41:603-609.
    Surface functionalization of multi-walled carbon nanotubes (MWCNTs) was carried out using a gas phase treatment in a Universal Temperature Program (UTP) reactor by flowing SO3 gas onto the CNTs while being heated at different temperatures. The functionalized nanotubes were characterized using X-ray Fluorescence (XRF), Fourier Transform Infrared Spectroscopy (FT-IR) and Raman spectroscopy. The amount of oxyen and sulfur containing groups was determined by acid-base titration. The titration results were in good agreement with elemental analysis using x-ray fluorescence. FTIRanalysis showed the presence of oxygen and sulfur containing groups, S=O, C-S, C=O and -COOH. Raman spectroscopy confirmed that oxygen and sulfur containing acidic groups covalently attached to the sidewall of the MWCNTs.
    Matched MeSH terms: X-Rays
  14. Fulltext Meralgia paresthetica - importance of anatomical knowledge in diagnosis
    Nurul Raihan, A.K., Narwani, H., Mohd Effendi, M.G., Chung, W.M.
    Medicine & Health, 2020;15(1):280-287.
    MyJurnal
    Penekanan saraf lateral kutaneus femoral merupakan punca kepada penyakit meralgia parestetika. Gejala penyakit ini ialah kesakitan dan perubahan sensori pada bahagian lateral paha. Namun, gejala penyakit ini seakan menyerupai gejala penyakit lain seperti radikulopati lumbar, penyempitan ruang femoro-acetabular, bursitis trokanterik dan beberapa contoh lain. Meralgia parestetika merupakan diagnosis secara pengecualian setelah penyebab kepada kesakitan pada bahagian lateral paha tidak dapat dibuktikan melalui hasil penyiasatan yang terperinci. Pengetahuan anatomi tentang saraf yang mensarafi bahagian paha adalah amat penting untuk mengenalpasti punca kesakitan yang dialami. Kami ingin melaporkan satu kes yang melibatkan seorang pesakit lelaki berumur 46 tahun, telah didiagnos menghidap kencing manis, darah tinggi, masalah jantung yang telah datang ke Jabatan Kecemasan dan Trauma dengan aduan kesakitan akut pada bahagian lateral paha kanan. Kesakitan yang dialami digambarkan sebagai rasa seperti terbakar, dicucuk dan disertai dengan rasa kebas. Selain itu, terdapat pengurangan sensasi rasa pada bahagian paha yang sakit. Tiada aduan berkaitan sakit pada rangsangan ringan (allodinia) atau sakit yang berlebihan pada rangsangan kuat (hiperalgesia). Bacaan gula darah kapilari ialah 8.4 mmol/l dan keputusan HbA1c ialah 7%. Diagnosis meralgia parestetika telah disahkan setelah semua kemungkinan diagnosis lain tidak dapat dibuktikan melalui pemeriksaan fizikal, ujian makmal dan radiologi (x-ray, ultrasound dan MRI). Keadaan pesakit bertambah baik selepas diberikan rawatan ubat secara oral dan menjalani sesi fisioterapi.

    Matched MeSH terms: X-Rays
  15. Fulltext Adsorption of sulfur dioxide (SO2) gas using treated rice husk ash (RHA) adsorbent
    Nurul Najwa Abd Malek, Rusdin Laiman
    Science Letters, 2018;12(1):63-76.
    MyJurnal
    The aim of this study was to investigate the potential of treated rice husk ash (RHA) as adsorbent to adsorb acidic SO2 gas. The treated RHA was prepared using a water hydration method by mixing the RHA, Calcium oxide (CaO) and Sodium Hydroxide (NaOH). The addition of NaOH is to increase the dissolution of silica from the RHA to form reactive species responsible for higher desulfurization activity. The untreated and treated RHA were subjected to several characterizations and the characteristics of the adsorbents were compared. The functional groups present on the surface of the adsorbent were determined using Fourier Transform Infrared (FTIR). The chemical composition of the untreated and treated RHA was analyzed by using X-ray Fluorescence (XRF). Scanning electron microscope (SEM) analysis showed that the treated RHA has higher porosity compared to untreated RHA. Based on the SO2 adsorption analysis, it was found that the treated RHA has higher adsorption capacity, 62.22 mg/g, compared to untreated RHA, 1.49 mg/g.
    Matched MeSH terms: X-Rays
  16. Fulltext Investigation of different exposure settings for image quality and entrance skin dose
    Nurshuhada Ali, Zafri Azran Abdul Majid, Mohd Syahriman Mohd Azmi
    International Journal of Allied Health Sciences, 2018;2(2):329-338.
    MyJurnal
    The ideal imaging system that is providing a good quality image of minimal radiation dose. There are many parameters that influenced image quality and radiation dose on clinical radiography. This study has identified some of the problems whereby there are practitioners do not select the proper size of image receptor (IR) and collimation during the examination. The re-usable of the IR and imaging plate also need to be concerned whether multiple exposures may affect the image
    quality or not. The purpose of this study is to investigate the effect of different exposure settings; kVp, mAs, collimation field sizes and different IR’ sizes for image quality and radiation dose. Methods: The wall-mounted x-ray machine act as a sources of radiation which exposed the acrylic cylinder that placed over the IR. The examination is repeated with different kVp, mAs, collimation field sizes and IR’s sizes. The source to image distance (SID) is fixed to 100 cm distance and put Nano dot dosimeter similar level with the top of acrylic to measure the dose. The result analysed by using software ImageJ to measure the Contrast to Noise Ratio (CNR). Results: The percentage of CNR1 and CNR2 reduced as the kVp is increased from (CNR1=77.25, CNR2=64.45), (CNR1=73.47, CNR2=61.22) and (CNR1=62.80, CNR2=57.32) for 50 kVp, 75 kVp and 100 kVp respectively and fluctuate when mAs increased. The CNR and entrance skin dose (ESD) shows higher when x-ray beam collimate according to IR’s size. Conclusions: Overall, the manipulative effect of exposure settings on image quality and ESD shows some positive results. The result also shows inconsistent readings in the CNR and ESD. The percentage of CNR decreased when kVp increases and slightly fluctuate when mAs increased. The ESD reading depicts higher when the kVp and mAs increase as well as when x-ray beam collimated according to IR’s sizes.
    Matched MeSH terms: X-Rays
  17. Fulltext Biochemical Properties and Potential Application of Proteases from Alkalophilic Bacillus lehensis G1
    Nur Zazarina Ramly, Nor Muhammad Mahadi, Noorul Aini Sulaiman
    Trop Life Sci Res, 2019;30(2):1-14.
    MyJurnal
    Pencirian enzim ekstraselular protease daripada bakteria Alkalophilic Bacillus lehensis G1 dari Malaysia telah dikaji. Enzim protease yang dirembeskan diuji pada agar susu skim 2%. Keputusan menunjukkan protease ekstraselular mampu mengekalkan aktiviti sehingga suhu 60°C di dalam julat pH yang luas iaitu 3 hingga 11 dengan suhu optimum pada 40°C dan pH optimum pada 7.0. Aktiviti enzim juga diperhatikan akan meningkat dengan penambahan beberapa ion iaitu Mn2+, Fe2+, Cu2+, Mg2+ dan Co2+. Manakala aktiviti protease didapati sedikit direncat dengan kehadiran ion Ca2+, K+ dan Ni2+ dengan baki aktiviti sebanyak 85%, 81% dan 75%. Protease ekstraselular juga didapati serasi dengan beberapa cecair detergen komersial dari Malaysia, yang menunjukkan protease ini boleh dimanfaatkan sebagai pembersih kotoran pada pakaian. Selain itu, potensi kegunaan protease yang dihasilkan oleh B. lehensis G1 ke atas penguraian gelatin dari filem X-ray yang telah digunakan juga telah dilakukan di dalam kajian ini.
    Matched MeSH terms: X-Rays
  18. UV-VIS spectral evaluation of CR-39 detector exposed with diagnostic dosage
    Nur Sha'dah Z, Iskandar S, Azhar A, Suhaimi M, Nur Lina R, Halimah M
    Sains Malaysiana, 2014;43:953-958.
    The effects of the X-ray irradiation and chemical etching on the physical and optical properties of cR-39 plastic detectors were investigated for different doses of X-ray. cR-39 detectors were etched in the solution of the 3 M of NaOH after irradiation for revelations of the track. The tracks formed on cR-39 either by irradiated X-ray or due to the effect of environment. The changes in the thickness after exposed have significant decrease in 60 kVp and started to increase in the range of 70 kVp up to 100 kVp due to the formation of oxidation layer on surface by free radicals. The optical band gaps before etching and after etching were determined by using Ultraviolet-visible (uv-Vis) spectroscopy. The optical band gap is attributed to the indirect transition due to its amorphous nature which is significantly decline trend energy in increase of the energy fluence of radiation. The Urbach's energy, is defined as the width of the tail localized states in the forbidden band gap which change increment trend as increase in dose delivered due to the distortion structure of the cR-39 in terms of the electron charges in valences electron hence attributes to the induced modification of angle bond between the neighboring atoms.
    Matched MeSH terms: X-Rays
  19. Fulltext Neuroendocrine tumour of the lung: a diagnostic challenge
    Nur Hidayah Bahrom, Anis Safura Ramli, Nor Suraya Samsudin, Norliana Dalila Mohamad Ali, Nor Salmah Bakar
    Journal of Clinical and Health Sciences, 2019;4(2):97-104.
    MyJurnal
    This is a case of a 62-year-old Indian man who was diagnosed with a rare type of lung
    neuroendocrine tumour (NET) of atypical carcinoid (AC) subtype which comprises only 0.1%–
    0.2% of pulmonary neoplasms. He initially presented to a private hospital in May 2018 with a
    6-month history of chronic productive cough and haemoptysis. Chest X-Ray (CXR), CT scan,
    bronchoscopy, biopsy and broncho-alveolar lavage were conducted. At this stage, imaging and
    histopathological investigations were negative for malignancy. Diagnosis of bronchiectasis was
    made and he was treated with antibiotic and tranexamic acid. Due to financial difficulties, his
    care was transferred to a university respiratory clinic in June 2018. His condition was monitored
    with CXR at every visit and treatment with tranexamic acid was continued for 6 months.
    However, due to persistent haemoptysis, he presented to the university primary care clinic in
    Dec 2018. Investigations were repeated in January 2019 where his CXR showed increased
    opacity of the left retrocardiac region and CT scan revealed a left lower lobe endobronchial
    mass causing collapse with mediastinal lymphadenopathy suggestive of malignancy.
    Bronchoscopy, biopsy and histopathology confirmed the presence of NET. Although the Ki-67
    index was low, the mitotic count, presence of necrosis and evidence of liver metastases
    favoured the diagnosis of AC. A positron emission tomography Ga-68 DONATOC scan showed
    evidence of somatostatin receptor avid known primary malignancy in the lungs with suspicions
    of liver metastasis. He was subsequently referred to the oncology team and chemotherapy was
    initiated. This case highlights the challenge in diagnosis and management of patients with AC.
    Physicians ought to be vigilant and have a high index of suspicion in patients who present with
    persistent symptoms on multiple visits. Early diagnosis of NET would prevent metastasis and
    provide better prognosis. Continuous follow-up shared care between primary care and
    secondary care physicians is also essential to provide ongoing psychosocial support for
    patients with NET, especially those with metastatic disease
    Matched MeSH terms: X-Rays
  20. Fulltext Assessment of blurring effect and its associated factors by using imagej: a multiparameter double holes contrast-detail phantom study
    Nur Farahana Pauzi, Zafri Azran Abdul Majid, Wan Muhamad Nasuha Wan Hussin, Abdul Halim Sapuan, Mohd Zulfaezal Che Azemin
    International Journal of Allied Health Sciences, 2017;1(2):107-119.
    MyJurnal
    X-ray is produced in form of divergent beam. The beam divergence results to blurring effect that influences image diagnosis. Thus, the blurring effect assessment should be enrolled within the quality control (QC) program of an imaging unit.
    Matched MeSH terms: X-Rays
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links