Displaying publications 101 - 120 of 545 in total

Abstract:
Sort:
  1. Progress and perspective on algal plastics - A critical review
    Zhang C, Show PL, Ho SH
    Bioresour Technol, 2019 Oct;289:121700.
    PMID: 31262543 DOI: 10.1016/j.biortech.2019.121700
    There is a growing interest in developing bio-based biodegradable plastics to reduce the dependence on depleting fossil fuels and provide a sustainable alternative. Bio-based plastics can usually be produced from lipids, proteins or carbohydrates, which are major components of microalgae. Despite its potential for algal plastics, little information is available on strain selection, culture optimization and bioplastics fabrication mechanism. In this review, we summarized the recent developments in understanding the utilization of seaweed polysaccharides, such as alginate and carrageenan for bio-based plastics. In addition, a conceptual biorefinery framework for algal plastics through promising components (e.g., lipids, carbohydrates and proteins) from microalgae is comprehensively presented. Moreover, the reasons for variations in bioplastics performance and underlying mechanism of various algal biocomposites have been critically discussed. We believe this review can provide valuable information to accelerate the development of innovative green technologies for improving the commercial viability of algal plastics.
    Matched MeSH terms: Lipids
  2. Fulltext Experimental data on behavioral, hepatosomatic, gonadosomatic indeces and total lipid of mud crab, Scylla olivacea at different velocity levels
    Muhammad T, Ismail S, Ikhwanuddin M, Abol-Munafi AB
    Data Brief, 2019 Aug;25:104205.
    PMID: 31338400 DOI: 10.1016/j.dib.2019.104205
    The data collected in the present work correspond to the behavioral, Hepatosomatic Index (HSI), Gonadosomatic Index (GSI) and total lipid analysis between male and female mud crabs, Scylla olivacea at different water velocities. A total of 56 immature male and female crabs were used in this data article. The important criteria for estimating the selective habitat facing by S. olivacea is a considerate of (1) the behavioral range in response to abiotic factors (and how it adapt ontogenetically) and (2) the movement of the crab under wild velocities situations. This work purposes to recognize the performance, locomotion rate and escaping capability of S. olivacea under stagnant and flowing water situations and to discuss the significance of horizontal walking to habitat choice. The collective outcomes clearly show that the locomotor activities and escaping capabilities of S. olivacea were influenced by water flow in the mangrove habitats. For the HSI data, velocities of 20 cm/s were the highest increased mean HSI percentage and highest mean HSI percentage in males and females was recorded on the end of the experiment. For GSI percentage of male and female crabs, 20 cm/s dominates the highest increases mean GSI, followed by 60, 40 and 0 cm/s. For total lipid percentage, the results showed that, the mean total lipid of hepatopancrease, muscle and gonad were increased at the beginning and decreased at the final in each water velocities except for 20 cm/s over a culture period of 60 days. Velocities of 20 cm/s were the highest increased mean total lipid percentage followed by 40, 60, and lastly 0 cm/s. The high flow velocities inhibit the production of hepatopancrease and gonad, in terms of nutrients from food used to endeavor the stress condition faced.
    Matched MeSH terms: Lipids
  3. Life cycle evaluation of microalgae biofuels production: Effect of cultivation system on energy, carbon emission and cost balance analysis
    Dasan YK, Lam MK, Yusup S, Lim JW, Lee KT
    Sci Total Environ, 2019 Oct 20;688:112-128.
    PMID: 31229809 DOI: 10.1016/j.scitotenv.2019.06.181
    The rapid depletion of fossil fuels and ever-increasing environmental pollution have forced humankind to look for a renewable energy source. Microalgae, a renewable biomass source, has been proposed as a promising feedstock to generate biofuels due to their fast growth rate with high lipid content. However, literatures have indicated that sustainable production of microalgae biofuels are only viable with a highly optimized production system. In the present study, a cradle-to-gate approach was used to provide expedient insights on the effect of different cultivation systems and biomass productivity toward life cycle energy (LCEA), carbon balance (LCCO2) and economic (LCC) of microalgae biodiesel production pathways. In addition, a co-production of bioethanol from microalgae residue was proposed in order to improve the economic sustainability of the overall system. The results attained in the present work indicated that traditional microalgae biofuels processing pathways resulted to several shortcomings, such as dehydration and lipid extraction of microalgae biomass required high energy input and contributed nearly 21 to 30% and 39 to 57% of the total energy requirement, respectively. Besides, the microalgae biofuels production system also required a high capital investment, which accounted for 47 to 86% of total production costs that subsequently resulted to poor techno-economic performances. Moreover, current analysis of environmental aspects of microalgae biorefinery had revealed negative CO2 balance in producing microalgae biofuels.
    Matched MeSH terms: Lipids
  4. A New Perspective on Dry Eye Classification: Proposal by the Asia Dry Eye Society
    Tsubota K, Yokoi N, Watanabe H, Dogru M, Kojima T, Yamada M, et al.
    Eye Contact Lens, 2020 Jan;46 Suppl 1:S2-S13.
    PMID: 31425351 DOI: 10.1097/ICL.0000000000000643
    The 2017 consensus report of the Asia Dry Eye Society (ADES) on the definition and diagnosis of dry eyes described dry eye disease as "Dry eye is a multifactorial disease characterized by unstable tear film causing a variety of symptoms and/or visual impairment, potentially accompanied by ocular surface damage." The report emphasized the instability of tear film and the importance of visual dysfunction in association with dry eyes, highlighting the importance of the evaluation of tear film stability. This report also discussed the concept of tear film-oriented therapy, which stemmed from the definition, and which is centered on provision of insufficient components in each tear film layer and ocular surface epithelium. The current ADES report proposes a simple classification of dry eyes based on the concept of tear film-oriented diagnosis and suggests that there are three types of dry eye: aqueous-deficient, decreased wettability, and increased evaporation. It is suggested that these three types respectively coincide with the problems of each layer: aqueous, membrane-associated mucins, and lipid/secretory mucin. Although each component cannot be quantitatively evaluated with the current technology, a practical diagnosis based on the patterns of fluorescein breakup is recommended. The Asia Dry Eye Society classification report suggests that for a practical use of the definition, diagnostic criteria and classification system should be integrated and be simple to use. The classification system proposed by ADES is a straightforward tool and simple to use, only through use of fluorescein, which is available even to non-dry eye specialists, and which is believed to contribute to an effective diagnosis and treatment of dry eyes.
    Matched MeSH terms: Lipids
  5. Hybrid liquid biphasic system for cell disruption and simultaneous lipid extraction from microalgae Chlorella sorokiniana CY-1 for biofuel production
    Yew GY, Chew KW, Malek MA, Ho YC, Chen WH, Ling TC, et al.
    Biotechnol Biofuels, 2019;12:252.
    PMID: 31666807 DOI: 10.1186/s13068-019-1591-8
    Background: The extraction of lipids from microalgae requires a pretreatment process to break the cell wall and subsequent extraction processes to obtain the lipids for biofuels production. The multistep operation tends to incur high costs and are energy intensive due to longer process operations. This research work applies the combination of radicals from hydrogen peroxide with an organic solvent as a chemical pretreatment method for disrupting the cell wall of microalgae and simultaneously extracting lipids from the biomass in a one-step biphasic solution.

    Result: Several parameters which can affect the biphasic system were analyzed: contact time, volume of solvent, volume ratio, type of organic solvent, biomass amount and concentration of solvents, to extract the highest amount of lipids from microalgae. The results were optimized and up to 83.5% of lipid recovery yield and 94.6% of enhancement was successfully achieved. The results obtain from GC-FID were similar to the analysis of triglyceride lipid standard.

    Conclusion: The profound hybrid biphasic system shows great potential to radically disrupt the cell wall of microalgae and instantaneously extract lipids in a single-step approach. The lipids extracted were tested to for its comparability to biodiesel performance.

    Matched MeSH terms: Lipids
  6. Fulltext An improved method for the rescue of recombinant Newcastle disease virus
    Cheow PS, Tan TK, Song AA, Yusoff K, Chia SL
    Biotechniques, 2020 02;68(2):96-100.
    PMID: 31937115 DOI: 10.2144/btn-2019-0110
    Reverse genetics has been used to generate recombinant Newcastle disease virus with enhanced immunogenic properties for vaccine development. The system, which involves co-transfecting the viral antigenomic plasmid with three helper plasmids into a T7 RNA polymerase-expressing cell to produce viral progenies, poses a great challenge. We have modified the standard transfection method to improve the transfection efficiency of the plasmids, resulting in a higher titer of virus progeny production. Two transfection reagents (i.e., lipofectamine and polyethylenimine) were used to compare the transfection efficiency of the four plasmids. The virus progenies produced were quantitated with flow cytometry analysis of the infectious virus unit. The modified transfection method increased the titer of virus progenies compared with that of the standard transfection method.
    Matched MeSH terms: Lipids
  7. Fulltext Carbon capture and storage with lipid production in integrated system of aqueous ammonia with marine mutant Synechococcus PCC 7002 IIUM01
    Azlin Suhaida Azmi, Mohamed Anwar Awan, Azura Amid, Noor Illi Mohamad Puad, Fathilah Binti Ali
    Biological and Natural Resources Engineering Journal, 2020;3(1):14-27.
    MyJurnal
    Carbon capture and storage (CCS) involves capturing, transporting and storing CO2 geologically underground permanently. Carbon capture using solvent such as amine and aqueous ammonia has been extensively studied by many researchers. However, this capture technology for CCS scheme is costly. As an alternative, CO2 emission can be cost-effectively captured and stored by utilizing the well-understood natural photosynthetic process of marine cyanobacteria. In contrast, the capturing process using cyanobacteria is very slow compared to the chemical absorption mentioned prior. Hence, this study aimed to investigate carbon capturing and storing process using integrated aqueous ammonia and mutated marine cyanobacteria (Synechococcus PCC 7002 IIUM01). The conditions that can maximize CO2 reduction under various conditions; CO2 flow rate (Lpm), absorption temperature (C) and aqueous ammonia concentrations (% (w/v)) were to be identified. The effectiveness of the mutant cyanobacteria was quantified by measuring the cell concentration, percentage reduction in CO2 concentration and lipid content. Synechococcus PCC 7002 IIUM01 showed it robustness by growing in aqueous ammonia solution at the concentration of 0.5 to 1% (w/v) at which the parent strain was not able to tolerate. The best conditions in maximizing CO2 capture and storage while sustaining growth optimally and being a potential biofuel source was observed at 0.5 Lpm of 15% CO2 gas flow rate, 0.75% (w/v) of ammonia concentration and 33C of absorption temperature. At this specified condition, around 68% of CO2 removal was achieved with 9% (w/w) yield of lipid and more than 13% (w/v) of cell concentration obtained.
    Matched MeSH terms: Lipids
  8. Authors' reply re: Maternal lipids are associated with newborn adiposity independent of GDM status, obesity and insulin resistance: a prospective observational cohort study
    Samsuddin S, Vethakkan SR
    BJOG, 2020 06;127(7):912-913.
    PMID: 32237027 DOI: 10.1111/1471-0528.16211
    Matched MeSH terms: Lipids
  9. Lipid peroxidation: Its effects on the formulation and use of pharmaceutical emulsions
    Khanum R, Thevanayagam H
    Asian J Pharm Sci, 2017 Sep;12(5):401-411.
    PMID: 32104352 DOI: 10.1016/j.ajps.2017.05.003
    Pharmaceutical delivery systems are developed to improve the physicochemical properties of therapeutic compounds. Emulsions are one of these drug delivering systems formulated using water, oils and lipids as main ingredients. Extensive data are usually generated on the physical and chemical characteristics of these oil-in-water and lipid emulsions. However, the oxidative tendency of emulsions is often overlooked. Oxidation impacts the overall quality and safety of these pharmaceutical emulsions. Additionally, introducing oxidatively unstable emulsions into biological systems further promotes oxidation in situ. Products of these reactions then continue to pose serious harm to cells and fuel other physiological oxidation reactions. Consequently, the increase of oxidation products leads to oxidative damage to biological systems. Thus, emulsions with lower lipid peroxidation are more stable and will reduce the negative effects of oxidation in situ. Preventive measures during the formulation of emulsions are important. Many naturally occurring and cost effective substances possess low oxidation tendencies and confer oxidative protection when used in emulsions. Additionally, certain preparatory methods should be employed to reduce or better control lipid peroxidation. Finally, emulsions must be evaluated for their oxidation susceptibility using the various techniques available. Careful attention to the preparation of emulsions and assessment of their oxidative stability will help produce safer emulsions without compromising efficacy.
    Matched MeSH terms: Lipids
  10. Lipid-based Nanocarriers for Cancer and Tumor Treatment
    Ansari MT, Ramlan TA, Jamaluddin NN, Zamri N, Salfi R, Khan A, et al.
    Curr Pharm Des, 2020;26(34):4272-4276.
    PMID: 32693760 DOI: 10.2174/1381612826666200720235752
    Cancer and tumor have been major reasons for numerous deaths in this century across the world. Many strategies have been designed to treat, diagnose, or prevent cancer. The success of chemotherapy largely depends on drug targeting. The advent of nanotechnology has vastly improved drug delivery for targeting and diagnosis. Nevertheless, the accuracy of drug targeting with polymeric nanoparticles has always been questionable. The polymeric nanoparticles synthesized from varieties of lipid-based compounds or combined with vectors, such as liposomes, ethosomes, and transfersomes, may allow the drug to overcome the issue of resistance to drug absorption in biological membranes. The combined effects of lipid-based nanocarriers are known to improve the efficacy and accuracy of polymeric nanoparticles. The present review explores the application of lipid based nanocarriers in the treatment and diagnosis of cancer A special focus is given to the use of lipid-based nanocarriers in the treatment, diagnosis, and mitigation of cancer located in blood, brain, lung, and colon. The treatment of these cancers has always been questionable as the chances of relapse are very high. The review encompasses the use of lipid-based nanocarriers in targeting tissue-specific cancer cells.
    Matched MeSH terms: Lipids
  11. Fulltext The roles of banana peel powders to alter technological functionality, sensory and nutritional quality of chicken sausage
    Zaini HBM, Sintang MDB, Pindi W
    Food Sci Nutr, 2020 Oct;8(10):5497-5507.
    PMID: 33133552 DOI: 10.1002/fsn3.1847
    Chicken sausages included with three different quantities of banana (Musa balbisiana) peel powder. The technological properties (cooking yield, texture, water-holding capacity, color, rheology, and texture), composition, and sensory acceptability were assessed. In storage study, lipid oxidation of the best formulation from the sensory score was evaluated. The inclusion of banana peel powder (BPP) raises the nutritional value with regard to an increase in dietary fiber and a reduction in the sausage fat content. The addition of BPP also causes a significant increase in the cooking yield and water-holding capacity. Additionally, storage modulus values increase with the increase in the BPP's concentration. However, with BPP incorporation, a hard texture and darkening of the sausage were observed. Interestingly, our findings exhibit the compromise in microstructural of chicken sausage with high percentage of BPP manifested by the high storage modulus and hardness but with low resistance toward stress, short linear viscoelastic region. This aspect also caused a significant change in the sensory score. The TBA value in the sausage containing 2% BPP exhibited a delay in lipid oxidation up to 55%, prompting its antioxidant potential. Generally, the incorporation of BPP to chicken sausage changes its properties. BPP has been a potential candidate as a value-adding ingredient that may be used during meat preparation since it positively influences the nutritional value and specific technological properties of the food.
    Matched MeSH terms: Lipids
  12. Role of nanocatalyst in the treatment of organochlorine compounds - A review
    El-Sheikh MA, Hadibarata T, Yuniarto A, Sathishkumar P, Abdel-Salam EM, Alatar AA
    Chemosphere, 2020 Nov 04.
    PMID: 33220978 DOI: 10.1016/j.chemosphere.2020.128873
    Since a few centuries ago, organochlorine compounds (OCs) become one of the threatened contaminants in the world. Due to the lipophilic and hydrophobic properties, OCs always discover in fat or lipid layers through bioaccumulation and biomagnification. The OCs are able to retain in soil, sediment and water for long time as it is volatile, OCs will evaporate from soil and condense in water easily and frequently, which pollute the shelter of aquatic life and it affects the function of organs and damage system in human body. Photocatalysis that employs the usage of semiconductor nanophotocatalyst and solar energy can be the possible alternative for current conventional water remediation technologies. With the benefits of utilizing renewable energy, no production of harmful by-products and easy operation, degradation of organic pollutants in rural water bodies can be established. Besides, nanophotocatalyst that is synthesized with nanotechnology outnumbered conventional catalyst with larger surface area to volume ratio, thus higher photocatalytic activity is observed. In contrast, disadvantages particularly no residual effect in water distribution network, requirement of post-treatment and easily affected by various factors accompanied with photocatalysis method cannot be ignored. These various factors constrained the photocatalytic efficiency via nanocatalysts which causes the full capacity of solar photocatalysis has yet to be put into practice. Therefore, further modifications and research are still required in nanophotocatalysts' synthesis to overcome limitations such as large band gaps and photodecontamination.
    Matched MeSH terms: Lipids
  13. Nanocarriers for treatment of dermatological diseases: Principle, perspective and practices
    Ramanunny AK, Wadhwa S, Gulati M, Singh SK, Kapoor B, Dureja H, et al.
    Eur J Pharmacol, 2021 Jan 05;890:173691.
    PMID: 33129787 DOI: 10.1016/j.ejphar.2020.173691
    Skin diseases are the fourth leading non-fatal skin conditions that act as a burden and affect the world economy globally. This condition affects the quality of a patient's life and has a pronounced impact on both their physical and mental state. Treatment of these skin conditions with conventional approaches shows a lack of efficacy, long treatment duration, recurrence of conditions, systemic side effects, etc., due to improper drug delivery. However, these pitfalls can be overcome with the applications of nanomedicine-based approaches that provide efficient site-specific drug delivery at the target site. These nanomedicine-based strategies are evolved as potential treatment opportunities in the form of nanocarriers such as polymeric and lipidic nanocarriers, nanoemulsions along with emerging others viz. carbon nanotubes for dermatological treatment. The current review focuses on challenges faced by the existing conventional treatments along with the topical therapeutic perspective of nanocarriers in treating various skin diseases. A total of 213 articles have been reviewed and the application of different nanocarriers in treating various skin diseases has been explained in detail through case studies of previously published research works. The toxicity related aspects of nanocarriers are also discussed.
    Matched MeSH terms: Lipids
  14. Recent development in the production strategies of microbial carotenoids
    Foong LC, Loh CWL, Ng HS, Lan JC
    World J Microbiol Biotechnol, 2021 Jan 04;37(1):12.
    PMID: 33392834 DOI: 10.1007/s11274-020-02967-3
    Carotenoids are a diverse group of lipid-soluble pigments that exhibit potent biological activities such as antioxidant, anti-inflammatory, and provitamin A activities. The potent health benefits of carotenoids result in the surge in the market demands for carotenoids, especially natural carotenoids from sustainable sources. Microbial carotenoids have attracted considerable interests for many industrial applications because of the low costs and ease of scaling-up with shorter production time. There is a growing interest in the search of new and sustainable microbial sources and cost-efficient production strategies following the high economical values and vast commercial applications of carotenoids. This article presents a review on the industrial production strategies of microbial carotenoids from microalgae, fungi, and bacteria sources. The industrial significance of the mass production of microbial carotenoids is also discussed. The structure, classification, and biosynthesis pathway of the carotenoids are also presented in this review.
    Matched MeSH terms: Lipids
  15. Toxicity study of the oil dispersant Corexit 9527 on Macrobrachium rosenbergii (de Man) egg hatchability by using a flow-through bioassay technique
    Law AT
    Environ Pollut, 1995;88(3):341-3.
    PMID: 15091547
    The effect of the oil-spill dispersant Corexit 9527 on egg-hatching rate of Macrobrachium rosenbergii (de Man) was studied by using an innovated flow-through bioassay technique. This bioassay method relies on the fact that M. rosenbergii fertilized eggs when detached from the mother prawn were able to hatch artificially. The flow-through system generated a stable and good water quality environment for hatching the eggs successfully. The Corexit 9527 had a pronounced effect on hatching rate of the M. rosenbergii eggs. In the control, the hatching rate of the eggs was 95.55% +/- 1.74%. However, it was reduced drastically with increasing concentrations of Corexit 9527. A 100% inhibition of egg hatchability was found when the level of Corexit 9527 was higher than 250 mg litre(-1). The EC(50) and the EC(95) values estimated by the probit method were 80.4 +/- 5.5 mg litre(-1) and 193.5 +/- 39.9 mg litre(-1) respectively (P = 0.05). The recommended safety level of Corexit 9527 for M. rosenbergii in Malaysian estuarine waters is below 40 mg litre(-1).
    Matched MeSH terms: Lipids
  16. Fulltext Effect of chitosan on gelling properties, lipid oxidation, and microbial load of surimi gel made from African catfish (Clarias gariepinus)
    Amiza, M.A, Kang, W.C.
    International Food Research Journal, 2013;20(4):1585-1594.
    MyJurnal
    The effect of the addition of different concentrations of chitosan (0–2.0% w/w) on the gelling properties of surimi gels made from African catfish (Clarias gariepinus) was tested. Lipid oxidation, total volatile basic nitrogen (TVB-N), and aerobic plate count (APC) changes during 20 days of storage at 4oC also were evaluated. Surimi gels with 1.5% (w/w) chitosan added exhibited the highest improvement in gel strength (58.92%), whiteness (13.18%), and water holding capacity (36.8%). Incorporation of 2.0% (w/w) chitosan in gels resulted in the lowest TVB-N value (36.63 mg N/100 g) at the end of the 20 days storage period. Both the peroxide values and the 2-thiobarbituric acid values increased more slowly in the chitosan-treated gels than in the control gel during the storage period. Chitosan at concentrations of 1.75% and 2.0% (w/w) conferred the best antioxidant effect on catfish surimi gels and resulted in a significant reduction in APC. Based on the microbiological acceptability limit (106 cfu/g), the shelf life
    of surimi gels with 1.75% and 2.0% (w/w) chitosan was extended to 12 days in refrigerated storage at 4oC, whereas the other samples lasted only 8 days. Hence, the addition of 1.5–2.0% (w/w) chitosan is a promising approach for the preparation of catfish surimi gels, as it improves texture, prevents lipid oxidation, and inhibits microbial growth.
    Matched MeSH terms: Lipids
  17. Fulltext Properties of An Oral Nanoformulation of A Molecularly Dispersed Amphotericin B Comprising A Composite Matrix of Theobroma Oil and Bee'S Wax
    Tan CS, Billa N, Roberts CJ, Scurr DJ
    Nanomaterials (Basel), 2014 Dec 19;4(4):905-916.
    PMID: 28344257 DOI: 10.3390/nano4040905
    An amphotericin B-containing (AmB) solid lipid nanoparticulate drug delivery system intended for oral administration, comprised of bee's wax and theobroma oil as lipid components was formulated with the aim to ascertain the location of AmB within the lipid matrix: (a) a homogenous matrix; (b) a drug-enriched shell; or (c) a drug enriched core. Both the drug-loaded and drug-free nanoparticles were spherical with AmB contributing to an increase in both the z-average diameter (169 ± 1 to 222 ± 2 nm) and zeta potential (40.8 ± 0.9 to 50.3 ± 1.0 mV) of the nanoparticles. A maximum encapsulation efficiency of 21.4% ± 3.0%, corresponding to 10.7 ± 0.4 mg encapsulated AmB within the lipid matrix was observed. Surface analysis and electron microscopic imaging indicated that AmB was dispersed uniformly within the lipid matrix (option (a) above) and, therefore, this is the most suitable of the three models with regard to modeling the propensity for uptake by epithelia and release of AmB in lymph.
    Matched MeSH terms: Lipids
  18. Fulltext Growth performance of fingerlings of the Indian major carp, catla catla (ham.) fed with feeds supplemented with different seaweeds
    Kotnala, Savita, Dhar, Puspita, Chatterji, Anil, Das, Partha
    Pertanika Journal of Science & Technology, 2010;18(2):-.
    MyJurnal
    The growth performance of Indian major carp (Catla catla, Ham.) was assessed over a period of six months through formulated feeds consisting of three seaweeds, namely Chlorodesmis fastigiata, Padina tetrastomatica and Stoechospermum marginatum. A relatively slow average growth rate (6.48 g/month) in fishes was observed in the control group. Meanwhile, the maximum and rapid growth rate (13.38 g/month) was observed with Feed-A supplemented with C. fastigiata. Similarly, a comparable growth rate was also observed with Feed-B (11.56 g/month) with P. tetrastomatica. However, the growth rate in fishes was relatively lower (9.05 g/month) with Feed-C containing seaweed S.marginatum. The growth rate in each month was also compared. The maximum attainable growth rate was found to be 12 g in the control group, whereas this was 30 g with Feed-A. The attainable growth was 20 g and 15 g with Feed-B and Feed-C, respectively. In the control group, the maximum increments in weight was recorded in the third (September) and fifth (November) months of rearing, and the increment was considerably reduced after that. The maximum increment in weight was in the second month (August) with Feed-A, and this was followed by a considerable decrease in subsequent months. A similar trend was observed with Feed-B and Feed-C. The biochemical composition of all the four feeds used in the present study showed approximately the same protein (0.45-0.50 mg/ ml) and lipid contents (0.6 mg/ml). Carbohydrate was the only parameter which showed a relatively significant effect (p
    Matched MeSH terms: Lipids
  19. Fulltext Squalene recovery from palm fatty acid distillate using supercritical fluid extraction
    Norhidayah, S., Baharin, B.S., Hamed, M., Zaidul, I.S.M.
    International Food Research Journal, 2012;19(4):1661-1667.
    MyJurnal
    The objective of this research is recovery of squalene from palm fatty acid distillate (PFAD) using supercritical fluid extraction (SFE). The extraction process was performed by using the SFE and recovered squalene was analyzed from total lipid extracts using HPLC. A central composite design was used to study the effect of SFE variables namely pressure (X₁) from 200 to 400 bar and temperature (X₂) from 40 to 60⁰C on the total lipid extracts (Y₁) and squalene concentration (Y₂) and optimize the SFE conditions. The nonlinear regression equations were significantly (p < 0.05) fitted for both responses with high R₂ (> 0.965), which had no indication of lack of fit. The results indicated that a combined pressure (200 bar) and temperature (50⁰C) was predicted to provide the optimum region in terms of total lipid extracts (13.84 ± 0.52%) and squalene concentration (418.31 ± 18.40 ppm) studied.
    Matched MeSH terms: Lipids
  20. Fulltext Extraction and determination of oryzanol in rice bran of mixed herbarium UKMB; AZ 6807: MR 185, AZ 6808: MR 211, AZ6809: MR 29
    Azrina, A., Maznah, I., Azizah, A.H.
    International Food Research Journal, 2008;15(1):89-96.
    MyJurnal
    The level of total lipid and oryzanol content, an important antioxidant compound in locally produced bran was investigated. Total lipid in rice bran was extracted using 3:2 chloroform:methanol mixture yielding 16.4% fat. Oryzanol content was determined without saponification using a reverse-phase HPLC. Four fractions of oryzanol were successfully separated and quantitated. The 4 isomers were cycloartenyl ferulate, 24-methylene cycloartanyl ferulate, campestryl ferulate and mixtures of β–sitosteryl ferulate and cycloartanyl ferulate. The oryzanol content of local mixed varieties ranged from 23.7–43.0 mg g-1. The oryzanol concentration may depend on factors such as plant varieties, processing methods employed, extracting solvent used and ratio of extracting solvent to bran as well as extracting solvent temperatures. This study showed the potential of oryzanol extract from rice bran as a source of antioxidant.
    Matched MeSH terms: Lipids
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links