This study considered the temporal variations in rainfall and water level patterns as governing factors, which influence the geochemical process of coastal aquifer around Pondicherry, South India. Rainfall and water level data were collected from 2006 to 2016, which showed that the amount of rainfall from 2006 to 2011 was higher than that of 2011 to 2016. To understand the geochemical process governing groundwater, samples were collected during 2006 (n = 54), followed by 2011 (n = 93), and during 2016 (n = 63) as part of continuous observation. The major ions and stable isotopes (δ18O and δD) were analyzed in the samples to determine the geochemical variations. The predominant types were noted as Na-HCO3 and Na-Cl; Ca-HCO3 and Ca-Mg-Cl; and Na-Cl and Ca-Mg-Cl in 2006, 2011, and 2016, respectively. Saturation states of sulfate and carbonate minerals were compared for the study periods and it indicates that the saturation index (SI) values were increased from 2006 to 2011, but decreased from 2011 to 2016. PHREEQC inverse modeling revealed the predominance for the dissolution and leaching of carbonate minerals during increased rainy periods, and the increase of halite saturation during lesser rainfall period. AQUACHEM mixing studies suggested that geochemical signatures of 2006 and 2011 were preserved in samples of 2016 in different proportions. Considering the major factors, the main processes prevailing in the study area were inferred to be dissolution and leaching during 2006~2011 years and seawater intrusion along with ion exchange during 2011~2016 years. In all these periods of study, anthropogenic impact was also identified in the groundwater samples. Hence, this study revealed that the rainfall and water level gave a significant variation in the geochemical process of groundwater in the coastal aquifer system.
This study tested the oxygen consumption rates (OCR), energy, and thermal coefficient of juvenile Lutjanus malabaricus (60 fish, size: 4.53 ± 1.14 g) at four temperatures of 22, 26, 30 and 34 °C. During 30 days of experimental period 5 fish tank-1 were reared at four temperatures with three replicates in intermittent flow respirometers in a recirculatory system under laboratory conditions. As expected, oxygen consumption rates increased significantly (P
Rivers as surface water in Malaysia are recipients of effluents and wastewater and yet it is important water source for daily uses of some villagers living along the river. Endocrine disruptors such as Bisphenol A (BPA) can be found in river due to continuous discharge into it. The objectives of this research is to find out the occurrence and concentration of BPA in Sungai Langat and also to see how water quality parameters such as temperature, pH, dissolved oxygen (DO), turbidity, Total Suspended Solid (TSS), Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD) and ammonia nitrogen (AN) affecting the concentration of BPA. 12 stations in total including upstream to downstream of Sungai Langat and also tributary of Sungai Langat. The instrument used to find out concentration of BPA is Triple Quadrupole LC/MS. The source of BPA are mainly industrial effluents and also direct domestic discharges. The water quality parameters that will affect concentration of BPA are Ammonia Nitrogen (AN), turbidity, Biochemical Oxygen Demand (BOD), Total Suspended Solid (TSS), and Chemical Oxygen Demand (COD), Dissolved Oxygen (DO). While pH and water temperature are also factors that will affect concentration of BPA but the significance is not shown in the analysis. It can be concluded that upstream of Sungai Langat has lower concentration of BPA than downstream.
Cardiopulmonary exercise testing is a non-invasive physiological test which incorporates the conventional method of exercise stress test with a more advanced breath-to-breath ventilatory analysis. The physiological parameters obtained from the test help to illustrate the cardiovascular, respiratory and metabolic responses to physical exertion. Individual's functional capacity and aerobic fitness is reflected by the value of maximal oxygen consumption (VO2 max) obtained from the cardiopulmonary exercise test. This non-invasive and sophisticated test is regarded as a valuable assessment tool in research and clinical practice. Cardiopulmonary exercise test has been extensively utilized to define the mechanisms of exercise intolerance in various clinical disorders, to evaluate responses to therapy and indicate disease prognosis. Emerging data obtained from the use of the cardiopulmonary exercise testing in the research field, has led to its extensive clinical usage. It is now utilized as an integral part of the patients' clinical evaluation in the field of respiratory and cardiovascular medicine, sports medicine, surgery as well as occupational and rehabilitative medicine. It has a clinical role in assessing patient's functional capacity, monitoring disease progression and response to therapy, predicting prognosis, and perioperative morbidity and mortality, as well as constructing and monitoring training and rehabilitative programs. This article aims to give an overview of the physiological profiles obtained from cardiopulmonary exercise testing, its methodological aspects, as well as its utility in research and clinical practice. KEYWORDS: Cardiopulmonary, exercise, physiology, respiratory medicine, oxygen consumption
This study evaluates the effects of subcritical hydrothermal treatment on palm oil mill effluent (POME) and its concomitant formations of solid hydrochar, liquid product and gaseous product. The reactions were carried out at temperatures ranged 493 K-533 K for 2 h. The highest reduction of chemical oxygen demand (COD) and biochemical oxygen demand (BOD) were 58.8% and 62.5%, respectively, at 533 K. In addition, the removal of total suspended solids (TSS) achieved up to 99%, with the pH of POME reaching 6 from the initial pH 4. The gas chromatography coupled with mass spectroscopy (GC-MS) analysis showed that the fresh POME contained n-Hexadecanoic acid as the dominant component, which gradually reduced in the liquid product in the reaction with increased temperature, in addition to the attenuation of carboxyl compounds and elevation of phenolic components. The gaseous products contained CO2, CO, H2, and C3 - C6 hydrocarbons. Traces of CH4 were only found at 533 K. CO2 is the dominant species, where the highest of 3.99 vol% per 500 mL working volume of POME recorded at 533 K. The solid hydrochars showed negligible morphological changes across the reaction temperature. The O/C atomic ratio of the hydrochar range from 0.157 to 0.379, while the H/C atomic ratio was in the range from 0.930 to 1.506. With the increase of treatment temperature, the higher heating value (HHV) of the hydrochar improved from 24.624 to 27.513 MJ kg-1. The characteristics of hydrochar make it a fuel source with immense potential. POME decomposed into water-soluble compounds, followed by deoxygenation (dehydration and decarboxylation) in producing hydrochar with lower oxygen content and higher aromatic compounds in the liquid product. Little gaseous hydrocarbons were produced due to subcritical hydrothermal gasification at low temperature.
The polyvinyl alcohol (PVA) and neem extract were grafted onto coupled oxides (3ZT-CO) via reflux process to stabilize the particles to form 3ZT-CO/PVA and 3ZT-CO/Neem. These were then incorporated into LLDPE by melt blending process to give LLDPE/3ZT-CO/PVA and LLDPE/3ZT-CO/Neem composites. The Neem and PVA stabilized particles showed high zeta potential and dispersed homogeneously in water. The stabilization process altered the shape of the particles due to plane growth along the (002) polar direction. The stabilizers acted as capping agents and initiated the one-dimensional growth. The alkyl chain groups from PVA increased the polarity of the LLDPE/3ZT-CO/PVA and played a dominant role in the water adsorption process to activate the photocatalytic activity. This was further enhanced by the homogeneous distribution of the particles and low degree of crystallinity (20.87%) of the LLDPE composites. LLDPE/3ZT-CO/PVA exhibited the highest photodegradation (93.95%), which was better than the non-stabilized particles. Therefore, the photocatalytic activity of a polymer composite can be enhanced by grafting PVA and neem onto couple oxides. The LLDPE/3ZT-CO/PVA composite was further used to treat textile effluent. The results showed the composite was able to remove dye color by 93.95% and to reduce biochemical oxygen demand (BOD) and chemical oxygen demand (COD) by 99.99%.
The refining of the crude palm oil (CPO) generates the palm oil refinery effluent (PORE). The presence of high contents of biochemical oxygen demand (BOD), chemical oxygen demand (COD), turbidity, and suspended solids (SS) in PORE encourages the determination of an effective treatment process to minimize the environmental pollution and preserve aquatic life. In the present study, a biodegradable natural polymer, namely tannin, was utilized as a coagulant to treat PORE. The coagulation experiment was conducted using a jar test apparatus. The tannin coagulation efficiency was evaluated based on the BOD, COD, turbidity, and SS removal from PORE by varying the tannin dose (50-300 mg/L), pH (pH 4-10), treatment time (15-90 min), and sedimentation time (15-90 min). It was found that the maximum removal of BOD, COD, turbidity, and SS was 97.62%, 88.89%, 93.01%, and 90.21%, respectively, at pH 6, a tannin dose of 200 mg/L, 60 min of coagulation time, and 60 min of sedimentation time. Analyses of isotherm models revealed that the Freundlich isotherm model was well fitted with the coagulation study. Kinetics studies show that the pseudo-second-order kinetics model was the well-fitted kinetics model for the BOD, COD, turbidity, and SS removal from PORE using tannin as a polymeric coagulant. The determination of thermodynamics parameters analyses revealed that BOD, COD, turbidity, and SS removal from PORE was spontaneous, exothermic, and chemical in nature. The finding of the present study shows that tannin as a natural polymeric coagulant would be utilized in PORE treatment to avoid toxic sludge generation.
Effective treatment of wastewater is crucial in order to achieve a sustainable development. For instance, highly efficient treatment processes with low capital requirements are the major prerequisite for implementation of the advanced wastewater treatment operations. Among various available treatment methods, the application of coagulation-flocculation process by using natural coagulant; chitosan has vast advantages such as low operating cost, environmental friendly and highly effective in the wastewater treatment operations. The application of nanotechnology in numerous treatment techniques are considered as the most significant advances in water and wastewater treatment practices. The utilization of magnesium oxide (MgO) as nano-adsorbent has recently gained attention as a potential treatment method in water remediation particularly for treating effluents with high amount of organic dyes and heavy metals due to its high treatment efficiency, low cost, versatility and environment compatibility. The purpose of this study was to determine the effectiveness of coagulation-flocculation process when using novel coagulant in which MgO coated with chitosan by investigating the percentage removal of several significant parameters which were turbidity, chemical oxygen demand (COD) and suspended solid. The removal efficiencies were determined throughout a series of experiments carried out using a standard jar test procedure in which three different coagulants; chitosan, MgO coated with chitosan and MgO were tested on water samples taken from Sg. Pusu. In addition, a set of experiments was designed using response surface methodology (RSM) in order to optimize adsorption of chitosan into MgO. The experiments were conducted at various concentrations of chitosan (10-30 mg/ml) and selected MgO dosage ranges (10-30 mg). From the obtained results, it was found that chitosan-MgO coagulant has good removal efficiencies of turbidity, chemical oxygen demand (COD) and suspended solids at 92%, 91%, and 98% respectively from the optimization of adsorption of chitosan-MgO. The MgO coated with chitosan is the best coagulant in this study compared to chitosan and MgO alone because of the ability of treating the river water with up to 90 % removal for all the main parameters. The results showed that coagulation-flocculation is effective as a treatment for treating river water.
In this study, the treatment of poultry slaughterhouse wastewater (PSW) was evaluated using two new down-flow high-rate anaerobic bioreactor systems (HRABS), including the down-flow expanded granular bed reactor (DEGBR) and the static granular bed reactor (SGBR). These two bioreactors have demonstrated a good performance for the treatment of PSW with removal percentages of the biochemical oxygen demand (BOD5), the chemical oxygen demand (COD), and fats, oil, and grease (FOG) exceeding 95% during peak performance days. This performance of down-flow HRABS appears as a breakthrough in the field of anaerobic treatment of medium to high-strength wastewater because down-flow anaerobic bioreactors have been neglected for the high-rate anaerobic treatment of such wastewater due to the success of up-flow anaerobic reactors such as the UASB and the EGSB as a result of the granulation of a consortium of anaerobic bacteria required for efficient anaerobic digestion and biogas production. Hence, to promote the recourse to such technologies and provide further explanation to their performance, this study approached the kinetic analysis of these two down-flow HRABS using the modified Stover-Kincannon and the Grau second-order multi-component substrate models. From a comparison between the two models investigated, the modified Stover-Kincannon model provided the best prediction for the concentration of the substrate in the effluent from the two HRABS. This analysis led to the determination of the kinetic parameters of the two models that can be used for the design of the two HRABS and the prediction of the performance of the SGBR and DEGBR. The kinetic parameters determined using the Modified Stover-Kincannon were Umax = 40.5 gCOD/L.day and KB = 47.3 gCOD/L.day for the DEGBR and Umax = 33.6 gCOD/L.day and KB = 44.9 gCOD/L.day for the SGBR; while, using the Grau second-order model, the kinetic models determined were a = 0.058 and b = 1.112 for the DEGBR and a = 0.135 and b = 1.33 for the SGBR.
Climate change-induced abiotic stress results in crop yield and production losses. These stresses result in changes at the physiological and molecular level that affect the development and growth of the plant. Reactive oxygen species (ROS) is formed at high levels due to abiotic stress within different organelles, leading to cellular damage. Plants have evolved mechanisms to control the production and scavenging of ROS through enzymatic and non-enzymatic antioxidative processes. However, ROS has a dual function in abiotic stresses where, at high levels, they are toxic to cells while the same molecule can function as a signal transducer that activates a local and systemic plant defense response against stress. The effects, perception, signaling, and activation of ROS and their antioxidative responses are elaborated in this review. This review aims to provide a purview of processes involved in ROS homeostasis in plants and to identify genes that are triggered in response to abiotic-induced oxidative stress. This review articulates the importance of these genes and pathways in understanding the mechanism of resistance in plants and the importance of this information in breeding and genetically developing crops for resistance against abiotic stress in plants.
Antioxidant peptides are naturally present in food, especially in fishes, and are considered to contain rich source of various bioactive compounds that are structurally heterogeneous. This study aims to identify and characterize the antioxidant property of the WL15 peptide, derived from Cysteine and glycine-rich protein 2 (CSRP2) identified from the transcriptome of a freshwater food fish, Channa striatus. C. striatus is already studied to contain high levels of amino acids and fatty acids, besides traditionally known for its pharmacological benefits in the Southeast Asian region. In our study, in vitro analysis of WL15 peptide exhibited strong free radical scavenging activity in 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS), superoxide anion radical and hydrogen peroxide (H2O2) scavenging assay. Further, to evaluate the cytotoxicity and dose-response, the Human dermal fibroblast (HDF) cells were used. Results showed that the treatment of HDF cells with varying concentrations (10, 20, 30, 40 and 50 μM) of WL15 peptide was not cytotoxic. However, the treatment concentrations showed enhanced antioxidant properties by significantly inhibiting the levels of free radicals. For in vivo assessment, we have used zebrafish larvae for evaluating the developmental toxicity and for determining the antioxidant property of the WL15 peptide. Zebrafish embryos were treated with the WL15 peptide from 4 h of post-fertilization (hpf) to 96 hpf covering the embryo-larval developmental period. At the end of the exposure period, the larvae were exposed to H2O2 (1 mM) for inducing generic oxidative stress. The exposure of WL15 peptide during the embryo-larval period showed no developmental toxicity even in higher concentrations of the peptide. Besides, the WL15 peptide considerably decreased the intracellular reactive oxygen species (ROS) levels induced by H2O2 exposure. WL15 peptide also inhibited the H2O2-induced caspase 3-dependent apoptotic response in zebrafish larvae was observed using the whole-mount immunofluorescence staining. Overall results from our study showed that the pre-treatment of WL15 (50 μM) in the H2O2-exposed zebrafish larvae, attenuated the expression of activated caspase 3 expressions, reduced Malondialdehyde (MDA) levels, and enhanced antioxidant enzymes, including superoxide dismutase (SOD) and catalase (CAT). The gene expression of antioxidant enzymes such as glutathione S-transferase (GST), glutathione peroxide (GPx) and γ-glutamyl cysteine synthetase (GCS) was found to be upregulated. In conclusion, it can be conceived that pre-treatment with WL15 could mitigate H2O2-induced oxidative injury by elevating the activity and expression of antioxidant enzymes, thereby decreasing MDA levels and cellular apoptosis by enhancing the antioxidant response, demonstrated by the in vitro and in vivo experiments.
Microbial fuel cell (MFC) is a promising technology that utilizes exoelectrogens cultivated in the form of biofilm to generate power from various types of sources supplied. A metal-reducing pathway is utilized by these organisms to transfer electrons obtained from the metabolism of substrate from anaerobic respiration extracellularly. A widely established model organism that is capable of extracellular electron transfer (EET) is Shewanella oneidensis. This review highlights the strategies used in the transformation of S. oneidensis and the recent development of MFC in terms of intervention through genetic modifications. S. oneidensis was genetically engineered for several aims including the study on the underlying mechanisms of EET, and the enhancement of power generation and wastewater treating potential when used in an MFC. Through engineering S. oneidensis, genes responsible for EET are identified and strategies on enhancing the EET efficiency are studied. Overexpressing genes related to EET to enhance biofilm formation, mediator biosynthesis, and respiration appears as one of the common approaches.
Understanding the reaction mechanism that controls the one-electron electrochemical reduction of oxygen is essential for sustainable use of the superoxide ion (O2˙-) during CO2 conversion. Here, stable generation of O2˙- in butyltrimethylammonium bis(trifluoromethylsulfonyl)imide [BMAmm+][TFSI-] ionic liquid (IL) was first detected at -0.823 V vs. Ag/AgCl using cyclic voltammetry (CV). The charge transfer coefficient associated with the process was ∼0.503. It was determined that [BMAmm+][TFSI-] is a task-specific IL with a large negative isovalue surface density accrued from the [BMAmm+] cation with negatively charged C(sp2) and C(sp3). Consequently, [BMAmm+][TFSI-] is less susceptible to the nucleophilic effect of O2˙- because only 8.4% O2˙- decay was recorded from 3 h long-term stability analysis. The CV analysis also detected that O2˙- mediated CO2 conversion in [BMAmm+][TFSI-] at -0.806 V vs. Ag/AgCl as seen by the disappearance of the oxidative faradaic current of O2˙-. Electrochemical impedance spectroscopy (EIS) detected the mechanism of O2˙- generation and CO2 conversion in [BMAmm+][TFSI-] for the first time. The EIS parameters in O2 saturated [BMAmm+][TFSI-] were different from those detected in O2/CO2 saturated [BMAmm+][TFSI-] or CO2 saturated [BMAmm+][TFSI-]. This was rationalized to be due to the formation of a [BMAmm+][TFSI-] film on the GC electrode, creating a 2.031 × 10-9 μF cm-2 double-layer capacitance (CDL). Therefore, during the O2˙- generation and CO2 utilization in [BMAmm+][TFSI-], the CDL increased to 5.897 μF cm-2 and 7.763 μF cm-2, respectively. The CO2 in [BMAmm+][TFSI-] was found to be highly unlikely to be electrochemically converted due to the high charge transfer resistance of 6.86 × 1018 kΩ. Subsequently, O2˙- directly mediated the CO2 conversion through a nucleophilic addition reaction pathway. These results offer new and sustainable opportunities for utilizing CO2 by reactive oxygen species in ionic liquid media.
Matched MeSH terms: Oxygen; Reactive Oxygen Species
Summary: Home oxygen therapy programme is new in Malaysia. This programme enables children with respiratory insufficiency to be discharged home early.
Materials and Methods: Long term oxygen therapy was initiated using an oxygen concentrator in patients who i) remained hypoxic while breathing room air, ii) experienced desaturations of more than 20% during sleep as seen in patients with severe laryngomalacia and obstructive sleep apnoea syndrome and iii) had pulmonary hypertension with or without polycythemia. The median with first and third quartile values are presented for the quantitative variables.
Results: A total of 71 patients mainly children with bronchopulmonary dysplasia (BPD) (32) and bronchiolitis obliterans (12) were discharged home on this programme. The median age at which home oxygen was initiated in children with BPD was 5.0 (Q1:2 Q3:8) months. The median total duration of oxygen requirement for BPD was 8.0 (Q1:5, Q3:12) months. The median duration of home oxygen dependency was 3.5 (Q1:3, Q3:6) months. However children with bronchiolitis obliterans required longer duration of oxygen therapy compared to children with BPD i.e. median duration of 28 months (Q1:14.5 Q3:66). In other respiratory conditions the mean duration of supplemental oxygen varies some of which may be life long.
Conclusions: This paper has shown the importance of home oxygen program in children with respiratory disorders. It has significantly shortened hospital stay and thus saves hospital costs and prevents prolonged separation from the family.
Oxygen consumption values calculated by Fick's principle (cVO2) were compared to simultaneously obtained values measured by indirect calorimetry (mVO2) in two groups of patients; post-coronary artery bypass graft (post-CABG) and septic shock. In both groups of patients, oxygen consumption values derived using indirect calorimetry were higher than that from Fick's principle. Whilst the bias obtained between the two methods of measurement were of acceptable amount clinically, the limits of agreement were wide: -57 to 51 ml.min-1.m-2 in the post-CABG group and -101 to 67 ml.min-1.m-2 in the group of septic patients; indicating that significant differences exist between paired individual values such that cVO2 and mVO2 were not interchangeable in this study.
The electronic absorption spectra of eight substituted acetic acids have been measured at room temperature in several solvents. The ground state dipole moments are evaluated experimentally for these molecules. These ground state values are used in conjunction with the spectral results to evaluate their first electronically excited state dipole moments. For all the molecules investigated here the dipole moments in the excited state are higher than their ground state values.
Radiation processing of food materials by gamma-radiation is a well-established method for
microbial decontamination and insect disinfestation. Irradiation of spices at doses ranging from
10 to 30 kGy has been reported to result in complete elimination of microorganisms with
negligible changes in the flavour quality. The effect of gamma-radiation on microflora and
vanillin content of cured vanilla beans in the dose range of 5 - 50 kGy has been investigated, but
its effect on other major aroma compounds and vanillin glucoside (vanillin aroma precursor)
remaining after curing have not been studied so far. Vanillin (4-hydroxy-3-methoxybenzaldehyde)
is one such compound used as a flavouring agent and as a dietary component. It is the major
component of natural vanilla, which is one of the most widely used and important flavouring
materials throughout the world. Vanillin is an antioxidant capable of protecting membrane
against lipid peroxidation and DNA against strand breaks induced by reactive oxygen species.
The present work was aimed to study the effect of gamma-radiation processing on the major
aroma compounds of cured vanilla beans and also to investigate possible enhancement in vanillin
content by the radiolytic breakdown of vanillin glucoside present already. Cured vanilla beans
were irradiated (5, 10, 15, 20 and 30 kGy) and the vanillin content of control and irradiated
samples were analysed, respectively for possible enhancement of vanillin content by radiolysis of
vanillin glucoside. Radiolytic breakdown of glycosidic precursors of aroma constituents and
consequent release of free aroma was shown to result in the enhancement of aroma quality of
these products. Since a considerable amount of vanillin exists as its glycosidic precursor in cured
vanilla pods, a possible enhancement in yield of vanillin by radiation processing is thus expected.
Hence the highly stable oxygen–carbon linkage between vanillin and glucose limits the possible
enhancement of aroma quality of irradiated beans.
Matched MeSH terms: Oxygen; Reactive Oxygen Species
This study aims to investigate the potential of porous Co3O4 nanorods as the cathode catalyst for oxygen reduction reaction (ORR) in aqueous air cathode microbial fuel cells (MFCs). The porous Co3O4 nanorods were synthesized by a facile and cost-effective hydrothermal method. Three different concentrations (0.5mg/cm(2), 1mg/cm(2), and 2mg/cm(2)) of Co3O4 nanorods coated on graphite electrodes were used to test its performance in MFCs. The results showed that the addition of porous Co3O4 nanorods enhanced the electrocatalytic activity and ORR kinetics significantly and the overall resistance of the system was greatly reduced. Moreover, the MFC with a higher concentration of the catalyst achieved a maximum power density of 503±16mW/m(2), which was approximately five times higher than the bare graphite electrode. The improved catalytic activity of the cathodes could be due to the porous properties of Co3O4 nanorods that provided the higher number of active sites for oxygen.
Folic acid is a small molecule, also known as vitamin B9. It is an essential compound involved in important biochemical processes. It is widely used as a vector for targeted treatment and diagnosis especially in cancer therapeutics. Nevertheless, not many authors address the problem of folic acid degradation. Several researchers reported their observations concerning its denaturation, but they generally only took into account one parameter (pH, temperature, light or O2etc.). In this review, we will focus on five main parameters (assessed individually or in conjunction with one or several others) that have to be taken into account to avoid the degradation of folic acid: light, temperature, concentration, oxygen and pH, which are the most cited in the literature. Scrupulous bibliographic research enabled us to determine two additional degradation factors that are the influence of singlet oxygen and electron beam on folic acid stability, which are not considered as among the prime factors. Although these two factors are not commonly present as compared to the others, singlet oxygen and electron beams intervene in new therapeutic technologies and must be taken in consideration for further applications such photodynamic or X-rays therapies.