MyMedR

Displaying publications 1181 - 1200 of 1298 in total

Abstract:

Sort:

Quantitative PCR analysis of genes expressed during biofilm development of methicillin resistant Staphylococcus aureus (MRSA)

Atshan SS, Shamsudin MN, Karunanidhi A, van Belkum A, Lung LT, Sekawi Z, et al.

Infect Genet Evol, 2013 Aug;18:106-12.
PMID: 23669446 DOI: 10.1016/j.meegid.2013.05.002

Staphylococcus aureus biofilm associated infections remains a major clinical concern in patients with indwelling devices. Quantitative real-time PCR (qPCR) can be used to investigate the pathogenic role of such biofilms. We describe qPCRs for 12 adhesion and biofilm-related genes of four S. aureus isolates which were applied during in vitro biofilm development. An endogenous control (16S rRNA) was used for signal normalization. We compared the qPCR results with structural analysis using scanning electron microscopy (SEM). The SEM studies showed different cellular products surrounding the aggregated cells at different times of biofilm formation. Using qPCR, we found that expression levels of the gene encoding fibronectin binding protein A and B and clumping factor B (fnbA/B and clfB), which involves in primary adherence of S. aureus, were significantly increased at 24h and decreased slightly and variably at 48 h when all 4 isolates were considered. The elastin binding protein (ebps) RNA expression level was significantly enhanced more than 6-fold at 24 and 48 h compared to 12h. Similar results were obtained for the intercellular adhesion biofilm required genes type C (icaC). In addition, qPCR revealed a fluctuation in expression levels at different time points of biofilm growth of other genes, indicating that different parameter modes of growth processes are operating at different times.

Matched MeSH terms: Microscopy, Electron, Scanning
Characterization of aerobic granular sludge treating high strength agro-based wastewater at different volumetric loadings

Abdullah N, Yuzir A, Curtis TP, Yahya A, Ujang Z

Bioresour Technol, 2013 Jan;127:181-7.
PMID: 23131639 DOI: 10.1016/j.biortech.2012.09.047

Understanding the relationship between microbial community and mechanism of aerobic granulation could enable wider applications of granules for high-strength wastewater treatment. The majority of granulation studies principally determine the engineering aspects of granules formation with little emphasis on the microbial diversity. In this study, three identical reactors namely R1, R2 and R3 were operated using POME at volumetric loadings of 1.5, 2.5 and 3.5 kg COD m(-3) d(-1), respectively. Aeration was provided at a volumetric flow rate of 2.5 cms(-1). Aerobic granules were successfully developed in R2 and R3 while bioflocs dominated R1 until the end of experiments. Fractal dimension (D(f)) averaged at 1.90 suggesting good compactness of granules. The PCR-DGGE results indicated microbial evolutionary shift throughout granulation despite different operating OLRs based on decreased Raup and Crick similarity indices upon mature granule formation. The characteristics of aerobic granules treating high strength agro-based wastewater are determined at different volumetric loadings.

Matched MeSH terms: Microscopy, Electron, Scanning
Biosorption of copper and zinc by immobilised and free algal biomass, and the effects of metal biosorption on the growth and cellular structure of Chlorella sp. and Chlamydomonas sp. isolated from rivers in Penang, Malaysia

Maznah WO, Al-Fawwaz AT, Surif M

J Environ Sci (China), 2012;24(8):1386-93.
PMID: 23513679

In this study, the biosorption of copper and zinc ions by Chlorella sp. and Chlamydomonas sp. isolated from local environments in Malaysia was investigated in a batch system and by microscopic analyses. Under optimal biosorption conditions, the biosorption capacity of Chlorella sp. for copper and zinc ions was 33.4 and 28.5 mg/g, respectively, after 6 hr of biosorption in an immobilised system. Batch experiments showed that the biosorption capacity of algal biomass immobilised in the form of sodium alginate beads was higher than that of the free biomass. Scanning electron microscopy and energy-dispersive X-ray spectroscopy analyses revealed that copper and zinc were mainly sorbed at the cell surface during biosorption. Exposure to 5 mg/L of copper and zinc affected both the chlorophyll content and cell count of the algal cells after the first 12 hr of contact time.

Matched MeSH terms: Microscopy, Electron, Scanning
Optimization of an induction strategy for improving interferon-alpha2b production in the periplasm of Escherichia coli using response surface methodology

Azaman SN, Ramakrishnan NR, Tan JS, Rahim RA, Abdullah MP, Ariff AB

Biotechnol Appl Biochem, 2010 Aug;56(4):141-50.
PMID: 20604747 DOI: 10.1042/BA20100104

Induction strategies for the periplasmic production of recombinant human IFN-alpha2b (interferon-alpha2b) by recombinant Escherichia coli Rosetta-gami 2(DE3) were optimized in shake-flask cultures using response surface methodology based on the central composite design. The factors included in the present study were induction point, which related to the attenuance of the cell culture, IPTG (isopropyl beta-D-thiogalactoside) concentration and induction temperature. Second-order polynomial models were used to correlate the abovementioned factors to soluble periplasmic IFN-alpha2b formation and percentage of soluble IFN-alpha2b translocated to the periplasmic space of E. coli. The models were found to be significant and subsequently validated. The proposed induction strategies consisted of induction at an attenuance of 4 (measured as D600), IPTG concentration of 0.05 mM and temperature of 25 degrees C. The optimized induction strategy reduced inclusion-body formation as evidenced by electron microscopy and yielded 323.8 ng/ml of IFN-alpha2b in the periplasmic space with translocation of 74% of the total soluble product. In comparison with the non-optimized condition, soluble periplasmic production and the percentage of soluble IFN-alpha2b translocated to the periplasmic space obtained in optimized induction strategies were increased by approx. 20-fold and 1.4-fold respectively.

Matched MeSH terms: Microscopy, Electron, Transmission
Development of a novel model for the investigation of implant-soft tissue interface

Chai WL, Moharamzadeh K, Brook IM, Emanuelsson L, Palmquist A, van Noort R

J. Periodontol., 2010 Aug;81(8):1187-95.
PMID: 20450401 DOI: 10.1902/jop.2010.090648

In dental implant treatment, the long-term prognosis is dependent on the biologic seal formed by the soft tissue around the implant. The in vitro investigation of the implant-soft tissue interface is usually carried out using a monolayer cell-culture model that lacks a polarized-cell phenotype. This study developed a tissue-engineered three-dimensional oral mucosal model (3D OMM) to investigate the implant-soft tissue interface.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Fabrication of silver nanoparticles doped in the zeolite framework and antibacterial activity

Shameli K, Ahmad MB, Zargar M, Yunus WM, Ibrahim NA

Int J Nanomedicine, 2011;6:331-41.
PMID: 21383858 DOI: 10.2147/IJN.S16964

Using the chemical reduction method, silver nanoparticles (Ag NPs) were effectively synthesized into the zeolite framework in the absence of any heat treatment. Zeolite, silver nitrate, and sodium borohydride were used as an inorganic solid support, a silver precursor, and a chemical reduction agent, respectively. Silver ions were introduced into the porous zeolite lattice by an ion-exchange path. After the reduction process, Ag NPs formed in the zeolite framework, with a mean diameter of about 2.12-3.11 nm. The most favorable experimental condition for the synthesis of Ag/zeolite nanocomposites (NCs) is described in terms of the initial concentration of AgNO(3). The Ag/zeolite NCs were characterized by ultraviolet-visible spectroscopy, powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray fluorescence, and Fourier transform infrared. The results show that Ag NPs form a spherical shape with uniform homogeneity in the particle size. The antibacterial activity of Ag NPs in zeolites was investigated against Gram-negative bacteria (ie, Escherichia coli and Shigella dysentriae) and Gram-positive bacteria (ie, Staphylococcus aureus and methicillin-resistant Staphylococcus aureus) by disk diffusion method using Mueller-Hinton agar at different sizes of Ag NPs. All of the synthesized Ag/zeolite NCs were found to have antibacterial activity. These results show that Ag NPs in the zeolite framework can be useful in different biological research and biomedical applications.

Matched MeSH terms: Microscopy, Electron, Transmission
Fulltext Comparison between efficacy of allicin and fluconazole against Candida albicans in vitro and in a systemic candidiasis mouse model

Khodavandi A, Alizadeh F, Harmal NS, Sidik SM, Othman F, Sekawi Z, et al.

FEMS Microbiol Lett, 2011 Feb;315(2):87-93.
PMID: 21204918 DOI: 10.1111/j.1574-6968.2010.02170.x

The efficacy of allicin compared with fluconazole in alleviating systemic Candida albicans infections was evaluated both in vitro and in vivo through a systemic candidiasis mouse model. Determination of in vitro minimum inhibitory concentrations (MICs) for different C. albicans isolates revealed that both allicin and fluconazole showed different MICs that ranged from 0.05 to 12.5 μg mL(-1) and 0.25 to 16 μg mL(-1) , respectively. A time-kill study showed a significant effect of allicin (P<0.01) against C. albicans, comparable to that of fluconazole. Scanning electron microscopy observation revealed that, similar to fluconazole, allicin produced structural destruction of C. albicans cell surface at low MIC and lysis or puncture at high MIC concentrations. Treatment of BALB/c mice systemically infected with C. albicans showed that although the allicin treatment (at 5 mg kg(-1) day(-1) ) was slightly less efficacious than fluconazole treatment in terms of the fungal load reduction and host survival time, it was still effective against C. albicans in terms of mean survival time, which increased from 8.4 to 15.8 days. These results demonstrate the efficacy of anticandidal effects of allicin both in vitro and in an animal model of candidiasis and affirm the potential of allicin as an adjuvant therapy to fluconazole.

Matched MeSH terms: Microscopy, Electron, Scanning
Purification of His-tagged hepatitis B core antigen from unclarified bacterial homogenate using immobilized metal affinity-expanded bed adsorption chromatography

Yap WB, Tey BT, Alitheen NB, Tan WS

J Chromatogr A, 2010 May 21;1217(21):3473-80.
PMID: 20388569 DOI: 10.1016/j.chroma.2010.03.012

Hepatitis B core antigen (HBcAg) is used as a diagnostic reagent for the detection of hepatitis B virus infection. In this study, immobilized metal affinity-expanded bed adsorption chromatography (IMA-EBAC) was employed to purify N-terminally His-tagged HBcAg from unclarified bacterial homogenate. Streamline Chelating was used as the adsorbent and the batch adsorption experiment showed that the optimal binding pH of His-tagged HBcAg was 8.0 with a binding capacity of 1.8 mg per ml of adsorbent. The optimal elution condition for the elution of His-tagged HBcAg from the adsorbent was at pH 7 in the presence of 500 mM imidazole and 1.5 M NaCl. The IMA-EBAC has successfully recovered 56% of His-tagged HBcAg from the unclarified E. coli homogenate with a purification factor of 3.64. Enzyme-linked immunosorbent assay (ELISA) showed that the antigenicity of the recovered His-tagged HBcAg was not affected throughout the IMA-EBAC purification process and electron microscopy revealed that the protein assembled into virus-like particles (VLP).

Matched MeSH terms: Microscopy, Electron, Transmission
Silver/poly (lactic acid) nanocomposites: preparation, characterization, and antibacterial activity

Shameli K, Ahmad MB, Yunus WM, Ibrahim NA, Rahman RA, Jokar M, et al.

Int J Nanomedicine, 2010 Sep 07;5:573-9.
PMID: 20856832

In this study, antibacterial characteristic of silver/poly (lactic acid) nanocomposite (Ag/PLA-NC) films was investigated, while silver nanoparticles (Ag-NPs) were synthesized into biodegradable PLA via chemical reduction method in diphase solvent. Silver nitrate and sodium borohydride were respectively used as a silver precursor and reducing agent in the PLA, which acted as a polymeric matrix and stabilizer. Meanwhile, the properties of Ag/PLA-NCs were studied as a function of the Ag-NP weight percentages (8, 16, and 32 wt% respectively), in relation to the use of PLA. The morphology of the Ag/PLA-NC films and the distribution of the Ag-NPs were also characterized. The silver ions released from the Ag/PLA-NC films and their antibacterial activities were scrutinized. The antibacterial activities of the Ag/PLA-NC films were examined against Gram-negative bacteria (Escherichia coli and Vibrio parahaemolyticus) and Gram-positive bacteria (Staphylococcus aureus) by diffusion method using Muller-Hinton agar. The results indicated that Ag/PLA-NC films possessed a strong antibacterial activity with the increase in the percentage of Ag-NPs in the PLA. Thus, Ag/PLA-NC films can be used as an antibacterial scaffold for tissue engineering and medical application.

Matched MeSH terms: Microscopy, Electron, Transmission
Heat treatment effects on the characteristics and sonocatalytic performance of TiO2 in the degradation of organic dyes in aqueous solution

Abdullah AZ, Ling PY

J Hazard Mater, 2010 Jan 15;173(1-3):159-67.
PMID: 19740600 DOI: 10.1016/j.jhazmat.2009.08.060

The ambient sonocatalytic degradation of congo red, methyl orange, and methylene blue by titanium dioxide (TiO(2)) catalyst at initial concentrations between 10 and 50mg/L, catalyst loadings between 1.0 and 3.0mg/L and hydrogen peroxide (H(2)O(2)) concentrations up to 600 mg/L is reported. A 20 kHz ultrasonic processor at 50 W was used to accelerate the reaction. The catalysts were exposed to heat treatments between 400 and 1000 degrees C for up to 4h to induce phase change. Sonocatalysts with small amount of rutile phase showed better sonocatalytic activity but excessive rutile phase should be avoided. TiO(2) heated to 800 degrees C for 2h showed the highest sonocatalytic activity and the degradation of dyes was influenced by their chemical structures, chemical phases and characteristics of the catalysts. Congo red exhibited the highest degradation rate, attributed to multiple labile azo bonds to cause highest reactivity with the free radicals generated. An initial concentration of 10mg/L, 1.5 g/L of catalyst loading and 450 ppm of H(2)O(2) gave the best congo red removal efficiency of above 80% in 180 min. Rate coefficients for the sonocatalytic process was successfully established and the reused catalyst showed an activity drop by merely 10%.

Matched MeSH terms: Microscopy, Electron, Scanning
Isotherm, kinetic and thermodynamic studies of lead and copper uptake by H2SO4 modified chitosan

Kamari A, Ngah WS

Colloids Surf B Biointerfaces, 2009 Oct 15;73(2):257-66.
PMID: 19556114 DOI: 10.1016/j.colsurfb.2009.05.024

The kinetic and thermodynamic adsorption and adsorption isotherms of Pb(II) and Cu(II) ions onto H(2)SO(4) modified chitosan were studied in a batch adsorption system. The experimental results were fitted using Freundlich, Langmuir and Dubinin-Radushkevich isotherms; the Langmuir isotherm showed the best conformity to the equilibrium data. The pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models were employed to analyze the kinetic data. The adsorption behavior of Pb(II) and Cu(II) was best described by the pseudo-second order model. Thermodynamic parameters such as free energy change (DeltaG degrees ), enthalpy change (DeltaH degrees ) and entropy change (DeltaS degrees ) were determined; the adsorption process was found to be both spontaneous and exothermic. No physical damage to the adsorbents was observed after three cycles of adsorption/desorption using EDTA and HCl as eluents. The mechanistic pathway of the Pb(II) and Cu(II) uptake was examined by means of Fourier transform infrared (FTIR) and Energy dispersive X-ray (EDX) spectroscopy. The equilibrium parameter (R(L)) indicated that chitosan-H(2)SO(4) was favorable for Pb(II) and Cu(II) adsorption.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Pathologic characterization of a murine model of human enterovirus 71 encephalomyelitis

Ong KC, Badmanathan M, Devi S, Leong KL, Cardosa MJ, Wong KT

J. Neuropathol. Exp. Neurol., 2008 Jun;67(6):532-42.
PMID: 18520772 DOI: 10.1097/NEN.0b013e31817713e7

We describe a model of Enterovirus 71 encephalomyelitis in 2-week-old mice that shares many features with the human central nervous system (CNS) disease. Mice were infected via oral and parenteral routes with a murine-adapted virus strain originally from a fatal human case. The mice succumbed to infection after 2 to 5 days. Vacuolated and normal-appearing CNS neurons showed viral RNA and antigens and virions by in situ hybridization, immunohistochemistry, and electron microscopy; inflammation was minimal. The most numerous infected neurons were in anterior horns, motor trigeminal nuclei, and brainstem reticular formation; fewer neurons in the red nucleus, lateral cerebellar nucleus, other cranial nerve nuclei, motor cortex, hypothalamus, and thalamus were infected. Other CNS regions, dorsal root, and autonomic ganglia were spared. Intramuscular-inoculated mice killed 24 to 36 hours postinfection had viral RNA and antigens in ipsilateral lumbar anterior horn cells and adjacent axons. Upper cord motor neurons, brainstem, and contralateral motor cortex neurons were infected from 48-72 hours. Viral RNA and antigens were abundant in skeletal muscle and adjacent tissues but not in other organs. The distinct, stereotypic viral distribution in this model suggests that the virus enters the CNS via peripheral motor nerves after skeletal muscle infection, and spread within the CNS involves motor and other neural pathways. This model may be useful for further studies on pathogenesis and for testing therapies.

Matched MeSH terms: Microscopy, Electron, Transmission
Evaluation of load at fracture of Procera AllCeram copings using different luting cements

Al-Makramani BMA, Razak AAA, Abu-Hassan MI

J Prosthodont, 2008 Feb;17(2):120-124.
PMID: 18047490 DOI: 10.1111/j.1532-849X.2007.00270.x

PURPOSE: The current study investigated the effect of different luting agents on the fracture resistance of Procera AllCeram copings.
METHODS: Six master dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Thirty copings (Procera AllCeram) of 0.6-mm thickness were manufactured. Three types of luting media were used: zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and dual-cured composite resin cement (Panavia F). Ten copings were cemented with each type. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: ANOVA revealed significant differences in the load at fracture among the three groups (p < 0.001). The fracture strength results showed that the mean fracture strength of zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and resin luting cement (Panavia F) were 1091.9 N, 784.8 N, and 1953.5 N, respectively.
CONCLUSION: Different luting agents have an influence on the fracture resistance of Procera AllCeram copings.

Matched MeSH terms: Microscopy, Electron, Scanning
Mitochondrial disorder, diabetes mellitus, and findings in three muscles, including the heart

Bhattacharjee M, Venugopal B, Wong KT, Goto YI, Bhattacharjee MB

Ultrastruct Pathol, 2006 Nov-Dec;30(6):481-7.
PMID: 17183762

The authors describe the case of a 50-year-old man with chronic progressive external ophthalmoplegia (CPEO), diabetes mellitus (DM), and coronary artery disease. The patient had no cardiac conduction abnormalities. During coronary artery bypass surgery, his heart and two skeletal muscles were biopsied. All three muscles showed ragged red fibers. The heart muscle showed significant glycogen accumulation. Analysis of mitochondrial DNA (mtDNA) showed a 5019-base-pair deletion, with no duplications. There were morphologically abnormal mitochondria in all 3 muscles, with clinically apparent difference in preservation of function. The combination of diabetes mellitus and mtDNA deletion is fortuitous, as they can be causally linked. The cardiac pathology allows speculation about the possible adaptive processes that may occur in the heart in DM. There are few reported cases with CPEO and excess glycogen in the heart. Most show deposition of fat and poorer clinical outcomes as compared to those with glycogen deposition. This observation may lend support to the hypothesis that in the myocardium, adaptive responses are mediated via changes in glucose handling, whereas alterations in fat metabolism likely represent maladaptation.

Matched MeSH terms: Microscopy, Electron, Transmission
Pathogenesis and vertical transmission of a transplacental rat cytomegalovirus

Loh HS, Mohd-Lila MA, Abdul-Rahman SO, Kiew LJ

Virol J, 2006;3:42.
PMID: 16737550

Cytomegalovirus (CMV) congenital infection is the major viral cause of well-documented birth defects in human. Because CMV is species-specific, the main obstacle to developing animal models for congenital infection is the difference in placental architecture, which preludes virus transmission across the placenta. The rat placenta, resembling histologically to that of human, could therefore facilitate the study of CMV congenital infection in human.

Matched MeSH terms: Microscopy, Electron, Transmission
Effects of fluoride-modified titanium surfaces on osteoblast proliferation and gene expression

Isa ZM, Schneider GB, Zaharias R, Seabold D, Stanford CM

Int J Oral Maxillofac Implants, 2006 Mar-Apr;21(2):203-11.
PMID: 16634490

PURPOSE: The objective of this study was to test the hypothesis that fluoride-modified titanium surfaces would enhance osteoblast differentiation. Osteoblast growth on a moderately rough etched fluoride-modified titanium surface (alteration in cellular differentiation) was compared to osteoblast growth on the same surface grit-blasted with titanium dioxide. The potential role of nanometer-level alterations on cell shape and subsequent differentiation was then compared.
MATERIALS AND METHODS: Human embryonic palatal mesenchymal (HEPM) cultures were incubated on the respective surfaces for 1, 3, and 7 days, followed by analysis for cell proliferation, alkaline phosphatase (ALP) -specific activity, and mRNA steady-state expression for bone-related genes (ALP, type I collagen, osteocalcin, bone sialoprotein [BSP] II, Cbfa1, and osterix) by real-time polymerase chain reaction (PCR).
RESULTS: The different surfaces did not alter the mRNA expression for ALP, type I collagen, osterix, osteocalcin, or BSP II. However, Cbfa1 expression on the fluoride-modified titanium surface was significantly higher (P < .001) at 1 week. The number of cells on this surface was 20% lower than the number of cells on the surface TiO2-blasted with 25-microm particles but not significantly different from the number of cells on the surface TiO2-blasted with 125-microm particles. Cells grown on all the titanium surfaces expressed similar levels of ALP activity.
CONCLUSIONS: The results indicated that a fluoride-modified surface topography, in synergy with surface roughness, may have a greater influence on the level of expression of Cbfa1 (a key regulator for osteogenesis) than the unmodified titanium surfaces studied.

Matched MeSH terms: Microscopy, Electron, Scanning
Biosynthesis and structural characterization of Ag nanoparticles from white rot fungi

Chan YS, Mat Don M

Mater Sci Eng C Mater Biol Appl, 2013 Jan 1;33(1):282-8.
PMID: 25428073 DOI: 10.1016/j.msec.2012.08.041

Five species of white rot fungi were screened for their capability to synthesize Ag nanoparticles (AgNPs). Three modes of AgNP bioreduction were developed. Pycnoporus sanguineus is found as a potential candidate for the synthesis of AgNPs with a yield at 98.9%. The synthesized AgNPs were characterized using UV-vis spectroscopy, DLS, FTIR, TEM, and SEM. Results showed that AgNP absorption band was located at a peak of 420 nm. Both the SEM and TEM confirmed that the formation of AgNPs were mainly spherical with average diameters of 52.8-103.3 nm. The signals of silver atoms' presence in the mycelium were observed by SEM-EDS spectrum.

Matched MeSH terms: Microscopy, Electron, Transmission
A comparative evaluation of cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper): a SEM study

Reddy KB, Dash S, Kallepalli S, Vallikanthan S, Chakrapani N, Kalepu V

J Contemp Dent Pract, 2013 Nov 1;14(6):1028-35.
PMID: 24858745

The present study was conducted to compare the cleaning efficacy (debris and smear layer removal) of hand and two NiTi rotary instrumentation systems (K3 and ProTaper).

Matched MeSH terms: Microscopy, Electron, Scanning
Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3- hydroxyhexanoate) from palm oil products in a Wautersia eutropha mutant

Loo CY, Lee WH, Tsuge T, Doi Y, Sudesh K

Biotechnol Lett, 2005 Sep;27(18):1405-10.
PMID: 16215858

Palm kernel oil, palm olein, crude palm oil and palm acid oil were used for the synthesis of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] by a mutant strain of Wautersia eutropha (formerly Ralstonia eutropha) harboring the Aeromonas caviae polyhydroxyalkanoate (PHA) synthase gene. Palm kernel oil was an excellent carbon source for the production of cell biomass and P(3HB-co-3HHx). About 87% (w/w) of the cell dry weight as P(3HB-co-3HHx) was obtained using 5 g palm kernel oil/l. Gravimetric and microscopic analyses further confirmed the high PHA content in the recombinant cells. The molar fraction of 3HHx remained constant at 5 mol % regardless of the type and concentration of palm oil products used. The small amount of 3HHx units was confirmed by 13C NMR analysis. The number average molecular weight (M(n)) of the PHA copolymer produced from the various palm oil products ranged from 27 0000 to 46 0000 Da. The polydispersity was in the range of 2.6-3.9.

Matched MeSH terms: Microscopy, Electron, Transmission
Fulltext Biopolymers Regulate Silver Nanoparticle under Microwave Irradiation for Effective Antibacterial and Antibiofilm Activities

Velusamy P, Su CH, Venkat Kumar G, Adhikary S, Pandian K, Gopinath SC, et al.

PLoS One, 2016;11(6):e0157612.
PMID: 27304672 DOI: 10.1371/journal.pone.0157612

In the current study, facile synthesis of carboxymethyl cellulose (CMC) and sodium alginate capped silver nanoparticles (AgNPs) was examined using microwave radiation and aniline as a reducing agent. The biopolymer matrix embedded nanoparticles were synthesized under various experimental conditions using different concentrations of biopolymer (0.5, 1, 1.5, 2%), volumes of reducing agent (50, 100, 150 μL), and duration of heat treatment (30 s to 240 s). The synthesized nanoparticles were analyzed by scanning electron microscopy, UV-Vis spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy for identification of AgNPs synthesis, crystal nature, shape, size, and type of capping action. In addition, the significant antibacterial efficacy and antibiofilm activity of biopolymer capped AgNPs were demonstrated against different bacterial strains, Staphylococcus aureus MTCC 740 and Escherichia coli MTCC 9492. These results confirmed the potential for production of biopolymer capped AgNPs grown under microwave irradiation, which can be used for industrial and biomedical applications.

Matched MeSH terms: Microscopy, Electron, Scanning

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links