MyMedR

Displaying publications 121 - 140 of 276 in total

Abstract:

Sort:

Fulltext Phase formation study of CuAlO2 transparent conductive oxide thin films

Hutagalung, Sabar D., Woon, Wu S., Khatijah A. Yaacob, Lockman, Zainovia

Journal of Nuclear and Related Technologies, 2007;2007(1):165-170.
MyJurnal

P-type transparent conductive oxide of copper aluminum oxide (CuAlO2) thin films were prepared by using sol-gel method with nitrate solutions as starting precursor. Copper nitrate and aluminum nitrate were selected as raw materials that provide the copper and aluminum source. The CuAlO2 thin films were deposited on pre-cleaned silicon substrate by spin-coating technique. To study of phase formation of CuAlO2, as prepared sample was dried and subjected to heat treatment at various temperatures. The heat-treated samples were characterized by x-ray diffraction (XRD) and energy dispersive x-ray (EDX). From XRD analysis result found that CuAlO2 phase was formed after annealing at 1100 o C for 4 hrs. EDX result of annealed sample at 1100 o C shows composition of Cu and Al that indicate the possibility of forming CuAlO2.

Matched MeSH terms: X-Rays
Fulltext Nano-structural study of microfibrils in Acacia Mangium wood using small- angle x-ray scattering (SAXS)

Tabet, Tamer A., Fauziah Abdul Aziz, Shahidan Radiman

Journal of Nuclear and Related Technologies, 2007;2007(1):209-216.
MyJurnal

Small-angle X-ray scattering (SAXS) was used to investigate the nanostructure of the microfibrils of cell wall in Acacia Mangium wood. Parameters, such as the fibre length (L), surface area of the single fibre (S), the correspondence distance from the center of the fibre to the center of its neighbor and the shape of the fibre were determined as a function to the distance from pith towards the bark. The results indicate that the fibre length ranged from 53.44 nm to 13.72 nm from pith to bark. Surface area of the single fibre varied from 0.65 nm 2 to 4.36 nm 2 , the highest being found at the end of bark region. The mean value of the correspondence distance is 13.95 nm. Surface structure analysis from scattering graph showed a rod shape of fibre in the pith region of Acacia Mangium wood. The use of SAXS technique and scanning electron microscope (SEM) micrographs gives the most reliable dimensions values.

Matched MeSH terms: X-Rays
Fulltext Study of selective metals accumulation in green mustard (Brasissca rapa var. Parachinesis L.) from Cameron Highlands Farmlands, Pahang

Zaini Hamzah, Marlinda Musa, Ahmad Saat

Journal of Nuclear and Related Technologies, 2011;2011(1):1-5.
MyJurnal

There are many essential and non-essential elements including metals and radionuclides present in vegetables. Howeve r, the accumulation of the several metals and radionuclides might cause the contamination to vegetables itself. Green m ustard (Brasissca rapa var. Parachinesis L.) was selected to represent the vegetable in this study. Objectives of this stud y are to determine the concentration of metals and radionuclides in the samples and to calculate the enrichment factor ( EF) and also to estimate the uptake, base on biological accumulation coefficient (BAC), for the various parts of selecte d vegetables. Three farmlands in the Cameron Highlands were studied namely Bharat, Kg Raja and Bertam area. The g reen mustard and soil samples were collected during the harvest season. Samples were dried, ground and sieved prior t o analysis. Analyses for both samples were done by using X-rays Fluorescence Spectroscopy (XRF) to measure the conc entration of Fe, Zn, Hg, U and Th. The concentration of all elements in the soils is lower than their concentration in the control soil, except for Zn, U and Th. The concentration of all elements in Green Mustard is lower than their concentrat ion in the soil where it was grown. The EF values in the Brasissca rapa var. Parachinesis L are lower than 2 except for U and Th, indicating some degree of contamination due to anthropogenic activities or naturally origin. The BAC values show that Zn and Hg were accumulated in the green mustard, depending on where the plant grows.

Matched MeSH terms: X-Rays
Fulltext Removal of copper from aqueous solution by adsorption using magnesium aluminium hydrogenphosphate layered double hydroxides

Zaini Hamzah, Mohd Najif Ab Rahman, Siti Mariam Sumari, Yamin Yasin, Ahmad Saat

Journal of Nuclear and Related Technologies, 2011;2011(2):60-67.
MyJurnal

Layered double hydroxide (LDH) with Mg/Al molar ratio of 4/1 (MAN-4) was synthesized by co-precipitation and followed by hydrothermal method. The compound was allowed to undergo ion exchange with K2HPO4 for 48 hours to produce MgAlHPO4 (MAHP-4). The solid produced was characterized using X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FTIR). Adsorption of copper solution by MAHP-4 was carried out using batch experiment by mixing the copper solution and the sorbent MAHP-4. The effects of
various parameters such as contact time, pH, adsorbent dosage and initial concentration were investigated. The optimum pH for copper removal was found to be 4 and the optimum time of copper removal was found at 4 hours. The isotherm data was analysed using model isotherm Langmuir with the correlation coefficient of 0.999 was recorded. The maximum adsorption capacity, Qo (mg/g) of 142.8 mg/g was also recorded from the Langmuir isotherm. The remaining copper solution was determined by using EDXRF (Energy Dispersive XRay Fluorescence spectrometry) model MiniPal 4 (PAN analytical). The results in this study indicate that MAHP-4 has potential as an effective adsorbent for removing copper from aqueous solution.

Matched MeSH terms: X-Rays
Fulltext Stature approximation of Malays, Chinese and Indian in Malaysia using radiographs of femur, tibia and fibula

Amal Hayati Zainal Abidin, Khairul Osman, Sri Pawita Albakri Amir Hamzah, Noor Hazfalinda Hamzah, Ab Halim Mansar, Normaizatul Afizah Ismail

Jurnal Sains Kesihatan Malaysia, 2011;9(1):45-50.
MyJurnal

The study was conducted to create specific formulae for stature estimation of adult male population in Malaysia based on measurements of femur, tibia and fibula lengths using radiographic method. A number of thirty two Malaysians from hospitals involved as subjects in this study. The subjects were Malays (14), Chinese (8) and Indians (10) from 25-45 years old. The standing height of the subject was recorded before femur, tibia and fibula were scanned with an x-ray
machine. The bones length was measured on the x-ray film in centimetres (cm) and analysed using Statistical Package for Social Sciences (SPSS) version 19.0 for Windows. The results showed a significant relationship (p < 0.05) between stature and measurements of length of femur, tibia and fibula. Stature of Malays and Indians were significant (p < 0.05) with measurements of length of femur, tibia and fibula but insignificant in Chinese. Simple Linear Regression Analysis was used to derive regression equation for single bone and Multiple Linear Regression Analysis was used to derive regression equation for combination of femur, tibia and fibula. Six formulae for stature estimation of adult male population in Malaysia were derived. The formulae consist of three formulae for single bone, a formulae for combination bones with unknown race, a formulae for combination bones of Malays population and a formulae for combination bones of Indians population. Formulae for combination bones had the highest correlation coefficient compared to the formula using a single bone. Standard error was found to be high in all the formulae due to small sample size. Extension for this study is essential to provide Malaysia with accurate formulae.

Matched MeSH terms: X-Rays
Fulltext Rietveld quantitative phase analysis of non-stoichiometric cordierite synthesised from mainly talc and kaolin: effect of sintering temperature

Banjuraizah Johar, Hasmaliza Mohamad, Zainal Arifin Ahmad

Journal of Nuclear and Related Technologies, 2009;2009(1):103-110.
MyJurnal

Indialite or α-cordierite was synthesized by glass crystallization method using mainly talc and kaolin and with small amount of MgO, Al2O3, SiO2 to compensate the chemical formulation of non-stoihiometric compositions of cordierite. (3MgO.1.5Al2O3.5SiO2). B2O3, P2O5 and CaO was also added to decrease the melting and sintering temperature of cordierite. The glasses were pelletized and sintered from 850 o C up to 1050 o C. Phase compositions of both heat treated glass was quantified by X-ray powder diffraction data by the Rietveld method using TOPAS Ver 3 software. Result shows that about 60wt% of α cordierite has successfully crystallized at 850 o C. Beside secondary phases (forsterite) which come from initial raw materials, phases from grinding media were also presents in the sample. The contamination was considered high since it has reacted with existence phases to form a new phase at higher temperature. Without any contamination from grinding it was expected to obtain more than 90wt% α cordierite using the same composition.

Matched MeSH terms: X-Rays
Fulltext Adsorption of acid dyes onto Zinc Chloride-Modified Cocoa (Theobroma Cacao) pod Husk-based carbon

Nur Aqilah Zainal, Shariff Ibrahim, Borhannuddin Arifin

Pertanika Journal of Science & Technology, 2017;25(103):129-138.
MyJurnal

An agricultural waste, the cocoa pod husk was chemically modified using a dehydrating agent, zinc chloride (ZnCl2), carbonised and used for the remediation of acid dyes in an aqueous solution. The targeted acid dyes are: (i) Acid Violet 17 (AV17); (ii) Acid Yellow 36 (AY36); and (iii) Acid Blue 29 (AB29). The physicochemical properties of the zinc chloride-modified cocoa pod husk-based carbon (ZCPHC) were characterised by ash content, bulk density, pH slurry, pHpzc and Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-Ray (EDX) analysis. The bulk density and ash content of the prepared carbon is 0.55 g cm-1 and 7.0% respectively. The photograph of SEM shows distinct changes at the ZCPHC carbon surface as it has large pores formed due to ZnCl2 modification. The adsorption tests were performed in a batch adsorption system using an aqueous solution of the understudy acid dyes. The influence of pH and dose of an adsorbent on the acid dye uptake was investigated and discussed. The adsorption was in favour at acidic condition with maximum removal observed at pH 2. The removal efficiency of the aqueous acid dye solution increased with the increase in adsorbent dosage. The kinetic experiment showed equilibrium time is less than 40 minutes and the kinetic data for all three understudy acid dyes fitted well with the pseudo-second-order model with a correlation coefficient (R2) values above 0.98.

Matched MeSH terms: X-Rays
Fulltext Distribution of Silicified Microstructures, Regulation of Cinnamyl Alcohol Dehydrogenase and Lodging Resistance in Silicon and Paclobutrazol Mediated Oryza sativa

Dorairaj D, Ismail MR

Front Physiol, 2017;8:491.
PMID: 28747889 DOI: 10.3389/fphys.2017.00491

Lodging is a phenomenon that affects most of the cereal crops including rice, Oryza sativa. This is due to the fragile nature of herbaceous plants whose stems are non-woody, thus affecting its ability to grow upright. Silicon (Si), a beneficial nutrient is often used to toughen and protect plants from biotic and abiotic stresses. Deposition of Si in plant tissues enhances the rigidity and stiffness of the plant as a whole. Silicified cells provide the much needed strength to the culm to resist breaking. Lignin plays important roles in cell wall structural integrity, stem strength, transport, mechanical support, and plant pathogen defense. The aim of this study is to resolve effects of Si on formation of microstructure and regulation of cinnamyl alcohol dehydrogenase (CAD), a key gene responsible for lignin biosynthesis. Besides evaluating silicon, paclobutrazol (PBZ) a plant growth retartdant that reduces internode elongation is also incorporated in this study. Hardness, brittleness and stiffness were improved in presence of silicon thus reducing lodging. Scanning electron micrographs with the aid of energy dispersive x-ray (EDX) was used to map silicon distribution. Presence of trichomes, silica cells, and silica bodies were detected in silicon treated plants. Transcripts of CAD gene was also upregulated in these plants. Besides, phloroglucinol staining showed presence of lignified vascular bundles and sclerenchyma band. In conclusion, silicon treated rice plants showed an increase in lignin content, silicon content, and formation of silicified microstructures.

Matched MeSH terms: X-Rays
Fulltext Pollen-Structured Gold Nanoclusters for X-ray Induced Photodynamic Therapy

Tew LS, Cai MT, Lo LW, Khung YL, Chen NT

Materials (Basel), 2018 Jul 09;11(7).
PMID: 29987236 DOI: 10.3390/ma11071170

Photodynamic therapy (PDT) is a cancer treatment that employs the production of cytotoxic reactive oxygen species (ROS), subsequently triggering tumor apoptosis and tumor size reduction. However, this approach suffers from insufficient light penetration depth. In order to mitigate this issue, pollen-structured gold clusters (PSGCs) were designed for mediating X-ray-induced PDT for radiotherapy enhancement. The structure of PSGCs provides a large surface area that is able to generate ROS upon X-ray irradiation. The synthesized PSGCs were exposed to different X-ray doses and the generated ROS was then quantified by dihydroethidium (DHE) assay. Furthermore, at the cellular level, the PDT efficacy of PSGCs was evaluated via immunofluorescence staining with γ-H2AX and comet assay. The results demonstrated that PSGCs possess a significantly high ROS-generating capacity and a remarkable PDT efficacy in the treatment of breast cancer cells, thus showing potential clinical uses in deep-tissue cancer treatment.

Matched MeSH terms: X-Rays
Fulltext The oldest nutritional deficiency disease: a case report of scurvy

Yap, Chiew Yee, Tam, Pui Ying, Ng, Su Wei

Malaysian Journal of Paediatrics and Child Health, 2016;22(101):0-0.
MyJurnal

Scurvy resulting from dietary deficiency of vitamin C is characterized by anaemia, tender limbs swelling and hemorrhagic manifestations such as petechiae and bruises. We report a case of scurvy in a 13 years old boy with cerebral palsy who presented with history of limbs bruising and swelling for 2 months. On examination, he was cachexic and pale with poor dentition and swollen gum. There were extensive bruises and swollen limbs as well. His platelet count and coagulation profile were normal. Limbs X-ray revealed classical scorbutic changes in the long bones. Serum ascorbic acid level was low

Matched MeSH terms: X-Rays
Fulltext Comparison of direct method and indirect methods for sampling and analysis of airborne respirable crystaline silica by X-ray difractometer

Suhaily Amran, Ahmad Sayuti Zainal Abidin, Shoffian Amin Jaafar, Mohd Talib Latif, Abdul Mutalib Leman

Journal of Occupational Safety and Health, 2015;12(1):137-141.
MyJurnal

There are several alternative sampling and analytical methods available for the determination of respirable
crystalline silica exposure among workers. The commonly used ones are, (1) NIOSH Manual Analytical Method
No.7500(NMAM 7500) which is Silica, crystalline, by X-ray difractometer via filter deposition(NIOSH 2003), and
(2) MDHS 101 (Methods for the Determination of Hazardous Substances (MDHS) Guidance No.101: Respirable
crystalline silica in respirable airborne dust). The aim of this study is to compare applicability of respirable crystalline
silica sampling and analysis between method MDHS 101 and NMAM 7500. Laboratory procedures will be performed
strictly based on MDHS 101 and NMAM 7500. Both methods apply X-ray diffraction as analytical technique with
many variations on sampling techniques and laboratory preparations. Quality assurance values such as detection
limits, accuracy and precision are derived from both data and will be compared to determine which of the method
establishes better quality assurance. The method which establishes better quality assurance will be recommend to be
used in Malaysian respirable crystalline silica monitoring programme. The strength of this research lies on its potential
to provide local capabilities in analysis of respirable crystalline silica in Malaysian setting.

Matched MeSH terms: X-Rays
Fulltext Persistent Shoulder Pain in Young Male: Osteosarcoma

Arinima P, Ishak A

Korean J Fam Med, 2018 Jul;39(4):266-269.
PMID: 29972896 DOI: 10.4082/kjfm.17.0117

A 16-year-old Malay boy presented to Kota Bharu Health Care Centre, Kelantan, with left shoulder pain after sustaining a fall. On further history taking, it was noted that the pain preceded the fall by 1 month. The early changes of osteosarcoma were visible on an X-ray during the initial presentation; however, this was missed by the primary care doctors. Three months later, the patient presented with persistent pain in the left shoulder and was diagnosed with osteosarcoma.

Matched MeSH terms: X-Rays
Fulltext Characterization of COOH-Fe3O4/NCC-CTA+ on screen printed carbon electrode using field emission scanning electron microscope and energy dispersive X-Ray for DNA biosensor

Che Engku Noramalina Che-Engku-Chik, Nor Azah Yusof, Jaafar Abdullah, Siti Sarah Othman, Helmi Wasoh

Journal of Biochemistry, Microbiology and Biotechnology, 2017;5(2):19-21.
MyJurnal

A novel DNA biosensing platform was designed by the functionalization of iron oxide (Fe3O4)
with the carboxylic group via capping agent, mercaptopropionic acid (MPA) and conjugated
with nanocellulose crystalline (NCC) surface modified with surfactant cetyltrimethylammonium
bromide (CTAB) to assist in the DNA sensing capability. The product of nanocomposites
compound was drop-casted on screen printed carbon electrode (SPCE). Characterization by field
emission scanning electron microscope (FESEM) and energy dispersive X-Ray (EDX)
spectroscopy showing that carboxyl functionalized iron oxide (COOH-Fe3O4) can be hybridized
with NCC-CTA+ via electrostatic interaction.

Matched MeSH terms: X-Rays
Fulltext A Hydrogen Gas Sensor Based on TiO₂ Nanoparticles on Alumina Substrate

Mohd Chachuli SA, Hamidon MN, Mamat MS, Ertugrul M, Abdullah NH

Sensors (Basel), 2018 Aug 01;18(8).
PMID: 30071579 DOI: 10.3390/s18082483

High demand of semiconductor gas sensor works at low operating temperature to as low as 100 °C has led to the fabrication of gas sensor based on TiO₂ nanoparticles. A sensing film of gas sensor was prepared by mixing the sensing material, TiO₂ (P25) and glass powder, and B₂O₃ with organic binder. The sensing film was annealed at temperature of 500 °C in 30 min. The morphological and structural properties of the sensing film were characterized by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The gas sensor was exposed to hydrogen with concentration of 100⁻1000 ppm and was tested at different operating temperatures which are 100 °C, 200 °C, and 300 °C to find the optimum operating temperature for producing the highest sensitivity. The gas sensor exhibited p-type conductivity based on decreased current when exposed to hydrogen. The gas sensor showed capability in sensing low concentration of hydrogen to as low as 100 ppm at 100 °C.

Matched MeSH terms: X-Rays
Fulltext Removal of methyl orange dye by manganese/aluminium-layered double hydroxide

Mamat, M., Abdullah, M.A.A., Jaafar, A.M., Soh, S.K.C., Lee, C.E.

ASM Science Journal, 2018;11(101):105-113.
MyJurnal

As textile production flourishes nowadays, the amount of dyed wastewater entering the
water body has also increased. Dyes could have serious negative impacts to the environment
and also the human health, hence, they need to be removed from the water body. In this
study, layered double hydroxide (LDH) of manganese/aluminium (MnAl) was synthesised
to be used as a potential adsorbent to remove methyl orange (MO) dye due to its unique
lamellar structure which provides LDH with high anion adsorption and exchange ability.
MnAl was synthesized by using co-precipitation method and characterized by powder X-ray
diffraction (PXRD), Fourier-Transform Infrared Spectroscopy (FTIR), Inductively coupled
plasma atomic emission spectroscopy (ICP-AES) and Carbon, Hydrogen, Nitrogen, Sulphur
(CHNS) elemental analysers, and Accelerated Surface Area and Porosity Analyzer (ASAP).
Adsorption studies were conducted at different contact times and dosages of MnAl to evaluate
the performance of MnAl in removing MO from water. Kinetic and isotherm models were
tested using pseudo-first order, pseudo-second order, Langmuir isotherm and Freundlich
isotherm. MnAl LDH was found to be perfectly fitted into pseudo-second order and Langmuir
isotherm.

Matched MeSH terms: X-Rays
Fulltext Preparation and characterization of yttrium barium copper oxide (YBCO) superconductor with addition of cobalt oxide (Co3O4)

Jannah, A.N., Erwana, N.Y., Jamion, N.A.

Journal of Academia Universiti Teknologi MARA Negeri Sembilan, 2018;6(1):31-38.
MyJurnal

This study was carried out to investigate the electrical properties of YBCO sample as superconductor
and the effect of addition of Co3O4 on the superconducting properties of YBCO superconductor. The
YBCO sample was prepared by solid state reaction route. The samples were prepared by each with
weight percentage of cobalt oxide of x= 0.00, x= 0.01, x= 0.02 and x= 0.03. Electrical Conduction by
Multimeter, Fourier Transform Infrared (FTIR), Critical temperature (Tc) measurement, X-ray
Diffraction (XRD), and Scanning Electron Microscopy (SEM) were conducted for analysis.
Multimeter showed all samples were in electric conduction, FTIR showed that carbonyl compound in
the sample was removed after calcinations. Tc measurement showed that the critical temperature of
sample of x= 0.02 was increased compared to sample of x= 0.00. XRD showed all samples have
orthorhombic structure and SEM showed that the grain size was increased as increased the cobalt
addition in YBCO superconductor. Besides, the EDX also showed the composition of elements
YBCO were tally with chemicals used for pure YBCO and addition cobalt oxide into YBCO
superconductor.

Matched MeSH terms: X-Rays
Fulltext Analysis of the Binding of Aripiprazole to Human Serum Albumin: The Importance of a Chloro-Group in the Chemical Structure

Sakurama K, Kawai A, Tuan Giam Chuang V, Kanamori Y, Osa M, Taguchi K, et al.

ACS Omega, 2018 Oct 31;3(10):13790-13797.
PMID: 30411049 DOI: 10.1021/acsomega.8b02057

Aripiprazole (ARP), a quinolinone derivative, is an atypical antipsychotic drug that is used in the treatment of schizophrenia. ARP has an extensive distribution and more than 99% of the ARP and dehydro-ARP, the main active metabolite, is bound to plasma proteins. However, information regarding the protein binding of ARP is limited. In this study, we report on a systematic study of the protein binding of ARP. The interaction of ARP and structurally related compounds with human serum albumin (HSA) was examined using equilibrium dialysis, circular dichroism (CD) spectroscopy, fluorescent probe displacement, and an X-ray crystallographic analysis. The binding affinities (nK) for ARP and its main metabolite, dehydro-ARP with HSA were found to be significantly higher than other structurally related compounds. The results of equilibrium dialysis experiments and CD spectral data indicated that the chloro-group linked to the phenylpiperazine ring in the ARP molecule plays a major role in the binding of these ligands to HSA. Furthermore, fluorescent probe displacement results indicated that ARP appears to bind at the site II pocket in subdomain III. A detailed CD spectral analysis suggests that the chloro-group linked to the phenylpiperazine ring may control the geometry of the ARP molecule when binding in the site II binding pocket. X-ray crystallographic analysis of the ARP-HSA complex revealed that the distance between the chlorine atom at the 3-positon of dichlorophenyl-piperazine on ARP and the sulfur atom of Cys392 in HSA was 3.4-3.6 Å. A similar halogen bond interaction has also been observed in the HSA structure complexed with diazepam, which also contains a chloro-group. Thus, the mechanism responsible for the binding of ARP to a protein elucidated here should be relevant for assessing the pharmacokinetics and pharmacodynamics of ARP in various clinical situations and for designing new drugs.

Matched MeSH terms: X-Rays
Fulltext The Effect of Bi-Functionalized MMT on Morphology, Thermal Stability, Dynamic Mechanical, and Tensile Properties of Epoxy/Organoclay Nanocomposites

Sand Chee S, Jawaid M

Polymers (Basel), 2019 Dec 04;11(12).
PMID: 31817284 DOI: 10.3390/polym11122012

In this work, the optimum filler loading to prepare epoxy/organoclay nanocomposites by the in-situ polymerization method was studied. Bi-functionalized montmorillonite at different filler loading (0.5, 1.0, 2.0, 4.0 wt %) was dispersed in epoxy resin by using a high shear speed homogenizer. The effect on morphology, thermal, dynamic mechanical, and tensile properties of the epoxy/organoclay nanocomposites were studied in this work. Wide-angle X-ray scattering (WAXS) and field emission scanning electron microscope (FESEM) studies revealed that possible intercalated structures were obtained in epoxy/organoclay nanocomposites. Thermogravimetric analysis (TGA) shows that epoxy/organoclay nanocomposites exhibit higher thermal stability at the maximum and final decomposition temperature, as well as higher char content, compared to pristine epoxy. The dynamic mechanical analysis (DMA) indicate that storage modulus (E'), loss modulus (E″), cross-link density and glass transition temperature (Tg) of the nanocomposites were improved with organoclay loading up to 1 wt %. Beyond this loading limit, the deterioration of properties was observed. A similar trend was also observed on tensile strength and modulus. We concluded from this study that organoclay loading up to 1 wt % is suitable for further study to fabricate hybrid nanocomposites for various applications.

Matched MeSH terms: X-Rays
Fulltext Preparation and In Vitro Evaluation of Neutron-Activated, Theranostic Samarium-153-Labeled Microspheres for Transarterial Radioembolization of Hepatocellular Carcinoma and Liver Metastasis

Wong YH, Tan HY, Kasbollah A, Abdullah BJJ, Yeong CH

Pharmaceutics, 2019 Nov 12;11(11).
PMID: 31718079 DOI: 10.3390/pharmaceutics11110596

INTRODUCTION: Transarterial radioembolization (TARE) has been proven as an effective treatment for unresectable liver tumor. In this study, neutron activated, 153Sm-labeled microspheres were developed as an alternative to 90Y-labeled microspheres for hepatic radioembolization. 153Sm has a theranostic advantage as it emits both therapeutic beta and diagnostic gamma radiations simultaneously, in comparison to the pure beta emitter, 90Y.
METHODS: Negatively charged acrylic microspheres were labeled with 152Sm ions through electrostatic interactions. In another formulation, the Sm-labeled microsphere was treated with sodium carbonate solution to form the insoluble 152Sm carbonate (152SmC) salt within the porous structures of the microspheres. Both formulations were neutron-activated in a research reactor. Physicochemical characterization, gamma spectrometry, and radiolabel stability tests were carried out to study the performance and stability of the microspheres.
RESULTS: The Sm- and SmC-labeled microspheres remained spherical and smooth, with a mean size of 35 µm before and after neutron activation. Fourier transform infrared (FTIR) spectroscopy indicated that the functional groups of the microspheres remained unaffected after neutron activation. The 153Sm- and 153SmC-labeled microspheres achieved activity of 2.53 ± 0.08 and 2.40 ± 0.13 GBq·g-1, respectively, immediate after 6 h neutron activation in the neutron flux of 2.0 × 1012 n·cm-2·s-1. Energy-dispersive X-ray (EDX) and gamma spectrometry showed that no elemental and radioactive impurities were present in the microspheres after neutron activation. The retention efficiency of 153Sm in the 153SmC-labeled microspheres was excellent (~99% in distilled water and saline; ~97% in human blood plasma), which was higher than the 153Sm-labeled microspheres (~95% and ~85%, respectively).
CONCLUSION: 153SmC-labeled microspheres have demonstrated excellent properties for potential application as theranostic agents for hepatic radioembolization.

Matched MeSH terms: X-Rays
Eosinophilic lung

Danaraj TJ

Med J Malaya, 1947;4:278-288.

Eight caaes of this condition are described, the patients being four Ceylonese, three Indians, and one Chinese, all males except one. Symptoms consisted of breathlessness and cough, sputum being sometimes purulent and occasionally blood-stained. Six of the patients complained of loss of weight, and in one, a Ceylonese schoolboy, this was the only presenting symptom. The authors found the most troublesome complaint to be a paroxysmal cough which was always worst at night. On clinical examination rhonchi were heard scattered throughout both lung fields in five cases, the lungs being clear in the other three. X-ray examination showed characteristic mottling of both lungs in four cases and of one lung in one case; another showed increased vascular markings, while in two the lungs were clear. Sputum was examined for tubercle bacilli and mites but none were found. The technique used for searching for mites is not described. A marked eosinophilia was found in all cases, the highest count recorded being 33, 264 eosinophils per cmm.Treatment consisted of arsenic, given in the form of neoarsphenamine, six injections of 0.3 gm. in six cases, and stovarsol 4 grains t.d.s. for seven and ten days respectively in the other two. Four of the patients were cured, three were improved, while one was showing a favourable response although treatment had not been completed.The author emphasizes the importance of performing repeated blood counts in order to avoid missing this condition. Out of the eight cases which he describes, one had been wrongly diagnosed as pulmonary tuberculosis and three as bronchial asthma. One of the latter had an initial eosinophil count of 4, 092 which rose to 17, 700 three weeks later. H. T. H. Wilson

Matched MeSH terms: X-Rays

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links