Displaying publications 121 - 140 of 291 in total

Abstract:
Sort:
  1. Marina Mior, S.N., Leman, A.M., Masripan, R., Baharudin, M.R., M. Faazir T., M. Ifwat A.
    MyJurnal
    An awareness of possible risk factor in pesticides, by changing attitude towards the correct technique during spraying and
    changing behavior can increase safety of workers safety as well as performance. However, there is a limited study and not highlighted
    deeply in knowledge, attitude and practices of workers in palm oil plantation issue. Therefore , the objective of this paper is to identify
    the relationship between knowledge, attitude and practices of pesticides among the plantation workers. The quantitative method were
    used in this paper whereby 132 respondents as pesticide sprayer which represent 90% of the population of palm oil workers in Johor.
    The result of spearman correlation indicates that there is significant relationship between knowledge and practices. It shows the
    common pattern of high knowledge resulting high practices of the workers during spraying the pesticides at plantation. There is no
    relationship between knowledge and attitude and between attitude and practice of the workers at the workplace. This paper shows that
    knowledge need to be strengthen in agricultural communities of Johor in order to reduce health problem and sosial issue statistic and
    prevent for any future accident. Human exposure to pesticides is an important health and sosial issue as it usually results in serious
    health problems such as stroke, epilepsy, respiratory disorders and cancer. Death has been known to occur in some places as a result
    of exposures to pesticides. Therefore, more impact knowledge-focused programs need to be arranged and implemented to inculcate
    the better awareness of pesticides among palm oil workers, as without knowledge, people may become less careful and therefore are
    exposed to pesticide poisoning and other long term exposure illness in the future.
    Matched MeSH terms: Workplace
  2. Nur Nadia Adila Abdul Halim, Mohd Hafiidz Jaafar, Kadir Arifin, Kadaruddin Aiyub, Muhammad Rizal Razman, Mohd Haizzan Yahaya
    MyJurnal
    The construction industry is one of the largest sectors in Malaysia. This industry has become one of the main contributors
    for national economic development and consistently contributes 3% to 5% to the national Gross Domestic Product (GDP). This
    sector has also opened up job opportunities for various levels of employment. High demands and rapid urbanization offer huge
    opportunities for registered contractors. Despite contributing in enhancing national economics, this sector has been regarded as one
    of the most dangerous and hazardous workplaces due to the type of nature and the job activities at construction sites. According to
    the International Labour Organization (ILO), 2.3 million fatalities related to occupational accidents and illnesses are estimated to
    occur each year. Furthermore, 4 percent of world GDP is estimated to be lost due to occupational accidents and illnesses. The number
    of fatality accidents in the construction industry was the highest with 652 cases of non-permanent disability (NPD) and permanent
    disability (PD) accidents in the period 2007 to 2015, equivalent to 72.44 cases per year and representing 48.77% of the construction
    industry. The huge gap between the number of accidents reported to SOCSO and DOSH becomes a major concern due to a rising
    number of underreported cases of fatalities and injury in the construction sector, especially those involving foreign labour. The margin
    between accidents reported to SOCSO and DOSH is 97.49%. Regards to rapid developments, safety measures to improve performance
    management of OSH should be emphasized to reduce losses of life, property and productivity.
    Matched MeSH terms: Workplace
  3. Sethu, V.S.
    MyJurnal
    Work-related musculoskeletal disorders of the upper limb (WRMSDs-UL) account for one of the largest types of occupational disorders worldwide. This broad term includes several disorders, such as carpal tunnel syndrome, tendonitis, tension neck syndrome and lateral epicondylitis (tennis elbow) which are generally caused by poor postures, repetitive strain and psychosocial factors. Various workplace interventions have been investigated and employed to prevent the different WRMSDs-UL, but a common consensus to address the problem has yet to be achieved. This paper reviews and discusses the efficacies of some interventions which have been tested for the most prevalent type of WRMSDs-UL, carpal tunnel syndrome (CTS). The focus will be on computer users who developed CTS out of the prolonged and repetitive use of keyboards and pointing devices. The interventions studied include engineering design, management strategies, personal development, medical treatment and multi-dimensional approaches. Outcome of the study reveals that the most effective approach would be one that is multi-dimensional in nature, with the inclusion of at least two or more intervention strategies at the same time.
    Matched MeSH terms: Workplace
  4. Mohd Hafiidz Jaafar, Kadir Arifin, Kadaruddin Aiyub, Muhammad Rizal Razman, Mark Harris Zuknik
    MyJurnal
    Construction industry is one of the major contributors towards Malaysian economy and socio-economy. It is an important
    industry gearing Malaysia towards developed nation status. However, fatalities in this industry are a crucial problem. Number of
    fatalities in this industry is the highest compare to other industries registered in Malaysia. The contributing factors can be separated
    into immediate (human and worksite elements) and underlying (management and external). Occupational safety and health (OSH)
    management is a challenge in the construction industry due to its hazardous nature. A framework of construction OSH management
    consisting of policy, process, personnel and incentive elements were tested. 13 respondents from 13 residential projects comprising of
    high-rise and low-rise in Pulau Pinang were interviewed. It was found that the immediate factors are being more recognized by the
    respondents compare to the underlying factors. Human element is perceived as the most significant contributor, while the external
    element is the least significant. In terms of construction OSH management, process and personnel elements are the most significant in
    developing an effective OSH management programme.
    Matched MeSH terms: Workplace
  5. Nur Azlina Abd Rahman, Muhamad Arifpin Mansor, Ahmad Rasdan Ismail
    MyJurnal
    The occurrences of occupational accidents and incidents are increasing in parallel with the growth of industries
    such as mining and quarrying. The main objective of this study was to analyze data on the perception of occupational
    accidents in the mining and quarrying sector in Malaysia. The data was collected and examined based on the
    questionnaires on the level of perception of accident investigation in mining and quarrying sector. Statistical data
    reported by the Department of Occupational Safety and Health (DOSH) was also reviewed. The findings of this study
    prove that the level of perception of workers towards occupational accident issues in mining and quarrying sector
    is still in the moderate level with the mean value of 3.28. The findings show that 51.7% of the workers agree while
    25.9% totally agree to the accident occurrence. Only 1.7% of the workers are not aware of accident occurrence at the
    workplace. Employers and employees must carry out their responsibilities to prevent accidents by adhering to health
    and safety practices at the workplace.
    Matched MeSH terms: Workplace
  6. Mohd Nasir Selamat, Lilis Surienty
    MyJurnal
    Recent statistics from the Social Security Organization (SOCSO) of Malaysia shows Commuting Accident (CA)
    increased consistently by 1500 cases per year from 2008 to 2012. This has resulted in the rising of fatality rate,
    extensive claims of compensation payment and not to mention loss of valuable talents. However, little is known
    about the contributing factors to the occurrences of CA in Malaysia because CA is never considered to be work
    related before. This study aims to explore work related factors with occurrence of CA using 5-year statistical data
    from SOCSO, Malaysia. Moreover, we also reviewed studies published between 1990s and 2014 to support the
    statistical findings. Motorbike is found as the most common vehicle used which involved in CA. Individual factors
    concerning workers behaviour is a main risk factor of CA. Family related factors (parenting responsibility), work
    burden, workplace support as well as environmental factors such as bad weather and bad road conditions are also
    significant contributions of CA. It is very important to develop behavioural intervention strategies and provide proper
    training. Hence, more attention should be directed to young individual workers in balancing them with capabilities and
    organization performance demand. This may lead to the elimination of the other causes of CA. In conclusion, solutions
    to this problem involve not only a particular party to ensure the wellbeing of workers in Malaysia, but all authorities
    should play roles in enhancing safety and health matter of workers especially on the occurrence of accident.
    Matched MeSH terms: Workplace
  7. Norhafizah Yaacob, Shamsul B.M. Tamrin, Ng, Yee Guan, How, Vivien, Rozanah A. Rahman, Zerguine, Haroun, et al.
    MyJurnal
    Background: Occupational Safety and Health Master Plan for Malaysia 2015 was intended to increase awareness, knowledge and commitment to Occupational Safety and Health in all undertaking to reduce the number of injuries, diseases and fatalities. Objectives: The purpose of this study is to determine the effectiveness of Occupational Safety Health Master Plan for Malaysia 2015 (OSH-MP 15) in enhancing government leadership and preventive workplace culture. Methods: This cross sectional study covered all the states in Malaysia, constituting of 309 employers, 350 Occupational Safety Health practitioners and 360 employees as respondents. There were three questionnaires for three different groups which were employers, Occupational Safety Health practitioners and general employees. The respondents were selected through random sampling. Results: For strategy 1, there was a significant difference in mean of effectiveness of OSH-MP15 between sectors for general workers [F (11, 348) =12.06, p= =
    Matched MeSH terms: Workplace
  8. Irniza Rasdi, Nadia Farhana Ismail, Andy, Shin Shyen Kong, Suhainizam Muhammad Saliluddin
    MyJurnal
    Introduction: The prevalence of stress among Malaysian police is high in which 38.8% polices have severe stress related to work resources and workplace environment. Psychosocial safety climate is one of the indicators that can be used to avoid psychosocial health problems. Objective: This study was conducted to determine the risk factors of psychosocial safety climate and to measure the effectiveness of a customised safety website in improving the safety climate. Methodology: This study involved 105 police officers who were randomly selected from nine different departments in PDRM Bukit Aman. A survey adapted from previous study was used to determine the psychosocial safety climate levels among respondents. Then, occupational safety website was introduced to the respondents and being used for two weeks. Lastly, post survey was done to see the difference of psychosocial safety climate before and after the use of the website. Results and Discussion: Findings showed that team psychological safety (r=0.381, p= , p=
    Matched MeSH terms: Workplace
  9. Muhammad SH, Roy M
    Jurnal Psikologi Malaysia, 2014;olume 28:79-87.
    Accident in an organization is one of the most undesirable phenomenons all over the world. The consequences of accidents in workplace are numerous which include damages of resources and cost of lives of many workers. For example, in 1991 a major disaster occurred in U.S. at triangle Shirtwaist factory, which cost the life of 100 garments workers (Greenwald & Richard, 2005). In Bangladesh accidents in workplace are more frequent and devastating, for which Bangladesh has been criticized severely worldwide. Recently one of those unfortunate phenomenons in Bangladesh was fire at Nimtoli of old Dhaka which cost 117 people burnt alive in June 2010. Another accident took place in Tazreen Fashion, Dhaka in 2012 which caused at least 112 workers either burnt to death or died while trying to escape the blaze. These are the short picture of loss of lives. Yet the losses of resources are not few. Sometimes accidents create threats for human and animal kingdom also by large rate of environmental pollution. For Example, in 2005 devastating Texas City Refinery explosion cost lives of many workers as well as light hydrocarbons concentrated at ground level throughout a large surrounding area which caused long lasting environmental pollution (Baldwin & Lisa, 2008). Furthermore, economic loss cannot also be over looked. A little mistake costs huge loss in assembly line of work. Thus accidents reduce production rate, lessen the quality of product and the reputation of industry also.
    Matched MeSH terms: Workplace
  10. Lim KH, Lim HL, Teh CH, Kee CC, Heng PP, Cheah YK, et al.
    Tob Induc Dis, 2018;16.
    DOI: 10.18332/tid/95188
    Introduction: Understanding the prevalence of secondhand smoke (SHS) exposure and the associated factors is beneficial for the formulation of effective measures to reduce exposure to SHS. The purpose of this study was to determine SHS exposure at home and workplace, and its associated factors among non-smoker Malaysian adults. Methods: Data were extracted from the Global Adult Tobacco Survey-Malaysia (GATS-M) that involved a representative sample of 5112 Malaysian adults. Logistic regression analyses were performed to examine the association between SHS exposure, sociodemographic factors, knowledge on the danger of SHS, and smoking restrictions at home and at work among non-smokers. Results: Among non-smoker Malaysians, age ≥15 years, 27.9% (equivalent to approximately 4.21 million non-smokers) and 33.9% (equivalent to approximately 1.37 million non-smokers) reported that they were exposed to SHS at home and the workplace, at least once a month, respectively. Women (AOR=2.12, 95% CI: 1.61.2.78), young individuals (AOR=3.06, 95% CI: 1.48.6.33), Malays (AOR=2.39, 95% CI: 1.56.3.64) or other Bumiputra ethnic groups (AOR=2.40, 95% CI: 1.39.4.19) and those who worked as other than government employees were more likely to report SHS exposure at home (non-government employee: AOR=1.88, 95% CI: 1.06.3.36). Respondents with a total smoking restriction at home did not report any SHS exposure at home. Similarly, those whose workplace had smoking restrictions were less likely to report SHS exposure at the work compared to their counterparts whose workplace had partial (AOR=3.08, 95% CI: 1.84.5.15) or no smoking restrictions (AOR=15.33, 95% CI: 6.75.34.86). Conclusions: A substantial proportion of Malaysian adults were exposed to SHS at home and at work. The findings emphasize the need for policies on smoking restrictions at work and the need to promote the adoption of a completely smoke-free home, among the Malaysian population.
    Study name: Global Adults Tobacco Survey (GATS-2011)
    Matched MeSH terms: Workplace
  11. Nurulain M, Syed Ismail S, Emilia Z, Vivien H
    Malaysian Journal of Public Health Medicine, 2017;17 Special(1):123-132.
    Agriculture sector accounts significant numbers of injuries and fatalities in the workplace particularly related to pesticide management. Among three main pathways of pesticide exposure, dermal contact is the most common route, which exposure usually occurs during pesticide mixing/loading, application, harvesting and other farming activities. This review aims to present and discuss several vital components of pesticide dermal exposure among agriculture workers, as well as pesticide application in agriculture sector in Malaysia involving different commodity agriculture sub-sectors. Pesticide exposure was discussed from perspective of three pesticide management activities (i.e. preparation, application and cleaning) that contribute to the risk of exposure through three routes (i.e. emission, deposition, transfer). Moreover, this paper also discussed pesticide dermal exposure risk assessment methods which can be defined into exposure assessment and effect assessment. The exposure rate was affected by various factors such as application equipment, application rate and duration, type of pesticide formulation, pesticide management stage, usage of personal protective equipment, training and aptitude of the applicator as well as environmental factors (i.e. temperature, humidity, wind speed and direction). The factors mention earlier have been used to explain the exposure distribution over different parts of the body and support the fact that pesticide type was not a major factor in total exposure.
    Matched MeSH terms: Workplace
  12. Mohd Jamil Abdul Wahab, Noor Azrieda Abd Rashid, Salmiah Ujang, Choon LS
    Sains Malaysiana, 2016;45:1139-1147.
    Timber scaffold boards have been widely utilised in the offshore construction industry. However, technical specifications
    and inspection procedure for the application of scaffold boards from a wood material were inadequate. In the development
    of the standard requirements, evaluation of actual engineering practices could indicate the level of workplace safety. A
    study was conducted to identify risk and safety measures concerning the use of timber scaffold boards in construction.
    This article discusses on the occupational risks and ergonomics issues of the scaffolding application based on the physical
    and mechanical conditions of tropical timber scaffold boards extracted from offshore oil and gas rigs. The boards were
    exposed to a seasonal climate of East Coast monsoon of South China Sea between November and February. The scaffolding
    application extended up to 20 m directly above the ocean surface and some boards were completely immersed below
    the ocean surface particularly during elevated tidal waves. Some of the boards were installed as the on-deck platforms.
    Forty scaffold boards fabricated from tropical timber species were evaluated. Physical characteristics of the boards
    were described by natural and man-made factors. A three-point bending test was conducted to determine the maximum
    load capacity of each board and the mode of fracture was evaluated. Timber identification test was conducted to identify
    the groups of the timber being used. The microscopic observation confirmed the presence of hyphae which indicated the
    biological deterioration has happened in some of the boards. Occupational risks were summarised based on the results
    of the physical and mechanical assessments
    Matched MeSH terms: Workplace
  13. Yulita, Idris MA, Abdullah SS
    Scand J Psychol, 2022 Feb;63(1):19-31.
    PMID: 34807489 DOI: 10.1111/sjop.12789
    Psychosocial safety climate (PSC) is a facet-specific climate for psychological health and safety which constitutes an important organizational resource for creating a conducive work environment. The process to regain/restore energy expended at work, known as "recovery," also plays a pivotal role for individuals; however, this process, together with PSC, remains largely underexplored. The main purpose of this study is to investigate the role of PSC in enhancing the moderating role of individuals' psychological detachment and relaxation during weekends on the relationship between daily job demands in Week 1 and daily emotional exhaustion in Week 2. Data from a shortitudinal study of 178 teachers (in total, 534 diaries) in Terengganu, Malaysia, over two consecutive weeks, were operationalized at the individual level and daily level using Hierarchical Linear Modeling (HLM) software. The analysis showed that the daily experience of job demands in the prior week led to an increment of emotional exhaustion in the following week. Interestingly, the interaction role of PSC*psychological detachment and PSC*relaxation moderated the relationship between daily job demands and daily emotional exhaustion. Overall, this study highlights the importance of individual off-job recovery time and that building good PSC at work is fundamental in compensating for the adverse relationships between job demands and its consequences.
    Matched MeSH terms: Workplace
  14. Assiry AA, Alnemari A, Adil AH, Karobari MI, Sayed FR, Marya A, et al.
    Biomed Res Int, 2022;2022:4968489.
    PMID: 35036434 DOI: 10.1155/2022/4968489
    Background: Working conditions, job satisfaction, and their overall impact on a dentist's job satisfaction are critical for future employment and retaining of dentists.

    Objectives: This study is aimed at determining the factors influencing the job satisfaction level among dentists. It is also aimed at evaluating how personal (age, gender) and professional (type, type of qualification, and year of practice) characteristics influence overall job satisfaction.

    Methods: For data collection, a structured self-administered questionnaire was used, in which one part collected information on personal characteristics. At the same time, the other contained a questionnaire related to job satisfaction. The German validated version of the questionnaire had a 10-point Warr-Cook-Wall (WCW) scale developed by Warr et al. in 1979. Each item was rated on a 5-point Likert scale, with 5 representing excessive satisfaction and 1 representing extreme dissatisfaction.

    Results: The results revealed that dentists in Saudi Arabia have a higher satisfaction level with "colleagues and fellow workers" (26.5%). The relation between the years of practice was highly significant. However, they were dissatisfied with their "income" (22.6%), and when compared with concerning age, gender, profession, and their practice years, this finding was highly significant.

    Conclusion: A higher percentage of satisfaction was seen with the "fellow and colleague's workers" dimension. At the same time, "income" was the aspect with which the dentists showed extreme dissatisfaction.

    Matched MeSH terms: Workplace
  15. Onubi HO, Yusof N, Hassan AS
    Environ Sci Pollut Res Int, 2022 Jan;29(4):5431-5444.
    PMID: 34420175 DOI: 10.1007/s11356-021-15705-5
    Studies have proven that client satisfaction (CS) is greatly affected by the nature of construction practices on site. However, not much attention has been given to CS in projects that adopt green construction practices (GCPs). This study examines the effect of GCPs on CS, and the means by which CS can be achieved through health and safety performance (HSP). This study also analyses how the relationship between HSP and CS could vary depending on the level of GCPs adopted. A questionnaire with 27 items drawn from literature was used in collecting data from class A contractors in Nigeria. The study's hypotheses were tested using the partial least squares structural equation modelling (PLS-SEM) technique. The findings of the study reveal that GCPs have a positive effect on CS. HSP proved to only partially mediate the relationship between GCPs and CS. The findings also show that the effect of HSP on CS is moderated by GCPs with the stronger effect from projects with low adoption of GCPs. The study's findings highlight the pivotal role of HSP in ensuring CS in construction projects that adopt GCPs. This study makes practical contributions to the body of existing knowledge by highlighting the need for concerted efforts by contractors such as investing in health and safety training and ensuring site workers wear personal protective equipment aimed at adhering to acceptable health and safety standards. This can be achieved through provision of funds for safety activities, monitoring, and supervision of workers to guarantee HSP which translates to CS while adopting GCPs. However, the obstacles to these are the lack of safety culture by construction organizations, lack of enlightenment on the part of construction site workers, and poor safety climate on the construction project site. Additionally, the study provides greater insight on the practice of green construction among contractors by showing that the effect of HSP on CS would differ considerably on account of the level of GCPs adopted.
    Matched MeSH terms: Workplace
  16. Arunachalam S, Pau A, Nadarajah VD, Babar MG, Samarasekera DD
    Eur J Dent Educ, 2023 May;27(2):332-342.
    PMID: 35484781 DOI: 10.1111/eje.12809
    OBJECTIVE: Entrustable professional activities (EPAs) are tasks that a person who is qualified or is in the process to be credentialed are allowed to engage. There are several levels of entrustment based on degrees of supervision assigned to each EPA. This paper aims to describe the process and outcome of creating EPAs; validate EPAs relevant to undergraduate dental training.

    METHODS: A draft set of EPA statements was developed based on the consensus of an expert panel. These were then mapped to the nationally determined minimum experience thresholds (clinical and procedural experiences/competencies) and aligned to task-based instructional strategy. The EPAs were validated to improve the relevance by using a criterion-based rubric.

    RESULTS: An end-to-end process workflow led to the development of an EPA-based educational framework to bridge the gaps in the curriculum. The process identified a total of 41 EPAs and out of which, 10 EPAs were notated as core EPAs and will be subjected to structured workplace-based assessment complying to the national standards. The validation exercise rated core EPAs with an overall score matching close to the cut-off of 4.07 (Equal rubric).

    CONCLUSION: The end-to-end process workflow provided the opportunity to elaborate a structured process for the development of EPAs for undergraduate dental education. As validation is a continuous process, feedback from implementation will inform the next steps.

    Matched MeSH terms: Workplace
  17. Routh J, Paramasivam SJ, Cockcroft P, Wood S, Remnant J, Westermann C, et al.
    Vet Rec, 2023 Nov 18;193(10):e3504.
    PMID: 37955283 DOI: 10.1002/vetr.3504
    BACKGROUND: The alignment of student and workplace supervisors' perspectives on student preparedness for veterinary workplace clinical training (WCT) is unknown, yet misalignment could negatively impact workplace learning. The aim of this study was to quantify the relative importance of WCT preparedness characteristics according to students and supervisors and to identify differences.

    METHODS: A survey was completed by 657 veterinary students and 244 clinical supervisors from 25 veterinary schools, from which rankings of the preparedness characteristics were derived. Significant rank differences were assessed using confidence intervals and permutation tests.

    RESULTS: 'Honesty, integrity and dependability' was the most important characteristic according to both groups. The three characteristics with the largest rank differences were: students' awareness of their own and others' mental wellbeing and the importance of self-care; being willing to try new practical skills with support (students ranked both of these higher); and having a clinical reasoning framework for common problems (supervisors ranked higher).

    LIMITATIONS: Using pooled data from many schools means that the results are not necessarily representative of the perspectives at any one institution.

    CONCLUSION: There are both similarities and differences in the perspectives of students and supervisors regarding which characteristics are more important for WCT. This provides insights that can be used by educators, curriculum developers and admissions tutors to improve student preparedness for workplace learning.

    Matched MeSH terms: Workplace
  18. Jeppu AK, Kumar KA, Sethi A
    BMC Med Educ, 2023 Oct 06;23(1):734.
    PMID: 37803418 DOI: 10.1186/s12909-023-04734-y
    BACKGROUND: Modern clinical practice increasingly relies on collaborative, cooperative and team-based approaches for effective patient care. Recently, Jigsaw cooperative learning has gained attention in medical education. There is a need for studies in Southeast Asian context to establish its effectives in developing various core competencies expected of health professionals such as interpersonal, communication, collaborative, and teamwork skills. This current study explores the impact of using Jigsaw Cooperative Learning on undergraduate medical students.

    METHOD: An explanatory mixed method research design was carried out on first year medical students at a private university in Malaysia. In Phase I, a survey was conducted to explore the effectiveness of jigsaw learning. Descriptive and inferential statistics were calculated using SPSS. In Phase II, a focus group interview was conducted to explore their in-depth experiences. Qualitative data were thematically analysed.

    RESULTS: Fifty-seven students participated in the survey and seven students took part in the focus group interview. Quantitative data analysis showed a statistically significant improvement in the student's individual accountability, promotive interaction, positive interdependence, interpersonal skill, communication skill, teamwork skill, critical thinking and consensus building after jigsaw learning sessions. Qualitative data explained their experiences in-depth.

    CONCLUSION: Jigsaw cooperative learning improves collaboration, communication, cooperation and critical thinking among the undergraduate medical students. Educators should use jigsaw learning methods to encourage effective collaboration and team working. Future studies should explore the effectiveness of the jigsaw cooperative learning technique in promoting interprofessional collaboration in the workplace.

    Matched MeSH terms: Workplace
  19. Muthukumaran M, Mohd Nadzrul Safiq AR, Rosnah I, Nor Hisham M, Ashrul Riezal A, Ismail AG
    Med J Malaysia, 2023 May;78(3):287-295.
    PMID: 37271837
    INTRODUCTION: Firefighter satisfaction plays a crucial role in overall workplace happiness. We seek to quantify the effect size of firefighters' satisfaction with happiness at work after adjusting for socio-demographic attributes.

    MATERIALS AND METHODS: This study used data from an online cross-sectional survey that was conducted from 24 June to 24 July 2021 in the Fire and Rescue Department of Malaysia. Firefighters were approached using the saturation sampling technique. They received online surveys via email through the Director of State and follow-up reminders through the Assistant Director of State Operations. A total of two filter questionnaires were employed i.e. type and duration of service. Firefighters stating that they were volunteer/auxiliary firefighters or had been in service for 2 years or less were excluded. In this study, data from 6041 out of 8581 firefighters were included for further analysis. The survey utilised the validated staff satisfaction index (SSI) and the happy career (HC) scale for in-service firefighters. SSI was a dual-dimension index consisting of welfare and protection against hazards at work, with 16 subdimensions. The HC is a five multi-dimensional items scale. Then, we used multiple linear regression to obtain the coefficient of determination while adjusting for age groups, gender, marital status, job grade, years of service and region of service.

    RESULTS: A total of 6041 eligible data points were analysed in the study. The mean (±SD) age was 38.70 (8.97) years, of which 95.9% were male. The firefighters were in service for a median of 14 years (Q1, Q3: 8, 21). The firefighter reported higher life satisfaction (mean [SD] = 78.30 [9.15]) than happiness at work (mean [SD] = 77.22 [0.20]). The mean happiness scores differed significantly between years of service groups (p<0.001), region of service (p<0.001), marital status (p=0.029) and grade (p<0.001). Firefighters' satisfaction contributed 42.7% of workplace happiness (βadj=1.096 [95% CI: 1.064, 1.128]; p<0.001) after adjusting for frontline, married, the central region of service and male gender as control variables.

    CONCLUSION: Firefighter satisfaction had a large effect size on happiness at work (42.7%). However, the interpretation of this effect size should be done with caution because happiness at work is inseparable from other life dimensions such as stability in matrimonial relationships and finances, involvement in leisure and religious activities and being mentally healthy.

    Matched MeSH terms: Workplace
  20. Hasan SI, Yee A, Rinaldi A, Azham AA, Mohd Hairi F, Amer Nordin AS
    PLoS One, 2021;16(12):e0260221.
    PMID: 34855800 DOI: 10.1371/journal.pone.0260221
    Previous literature has shown that migrant workers manifested higher common mental issues (especially depressive symptom) compared to local workers due to stressors such as financial constraint and lack of access to healthcare. The aim of this systematic review and meta-analysis is to summarize the current body of evidence for the prevalence of depression and anxiety among migrant workers as well as exploring the risk factors and the availability of social support for migrant workers. Seven electronic databases, grey literature and Google Scholar were searched for studies from 2015 to 2021 related to mental health, social support and migrant workers. Study quality was assessed using the Newcastle Ottawa Scale and the Joanna Briggs Institute Qualitative Assessment and Review Instrument (JBI-QARI). Study heterogeneity was evaluated using I2 statistics. Random effects meta-analysis results were presented given heterogeneity among studies. The search returned 27 articles and only seven studies were included in meta-analysis, involving 44 365 migrant workers in 17 different countries. The overall prevalence of depression and anxiety among migrant workers was 38.99% (95% CI = 0.27, 0.51) and 27.31% (95% CI = 0.06, 0.58), respectively. Factors such as age, biological (health issue, family history of psychiatric disorder), individual (poor coping skills), occupational (workplace psychosocial stressors, poor working condition, salary and benefits issue, abuse), environmental (limited access towards healthcare, duration of residence, living condition) and social factor (limited social support) were associated with a mental health outcome in migrant workers. The availability of social support for migrant workers was mainly concentrated in emotional type of support. A high prevalence of depression and anxiety was found among migrant workers across the globe. This finding warrants a collective effort by different parties in providing assistance for migrant workers to promote their mental well-being.
    Matched MeSH terms: Workplace
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links