Displaying publications 1 - 20 of 143 in total

Abstract:
Sort:
  1. Ougi K, Okada K, Leong KH, Hayashi Y, Kumada S, Onuki Y
    Eur J Pharm Sci, 2020 Nov 01;154:105502.
    PMID: 32750421 DOI: 10.1016/j.ejps.2020.105502
    The purpose of this study was to investigate the effect of molecular mobility of water adsorbed by disintegrants on the hydrolytic degradation of active pharmaceutical ingredients (APIs). Fourteen different disintegrants were tested. First, powdered disintegrants were stored at conditions of 40 °C/75% relative humidity ("humid conditions") and their T2 relaxation times were measured by time-domain nuclear magnetic resonance for examination of the molecular mobility of water adsorbed by the disintegrant. From the observed T2 values, the water molecular mobility was fully characterized. In particular, the molecular mobility of water adsorbed by crospovidones was much higher than the molecular mobility of water adsorbed by the other test disintegrants because of longer T2 values. The next study examined the hydrolytic degradation of acetylsalicylic acid (ASA), a model moisture-sensitive API, stored under humid conditions. Physical mixtures of ASA and disintegrants or their model tablets were used as test samples, and they were stored for 7 d. The disintegrants contained in the samples clearly affected the ASA degradation: the most significant ASA degradation was observed for the crospovidone-containing samples. Finally, we analyzed the effect of the molecular mobility of water adsorbed by disintegrants on the ASA degradation by the least absolute shrinkage and selection operator (Lasso) regression techniques. As in the T2 experiment, various properties of disintegrants (i.e., water content, pH, and water activity) were used in this experiment as the explanatory variables. From the Lasso analysis, we successfully showed that the higher molecular mobility of water adsorbed by disintegrants significantly enhanced ASA degradation. These findings provide profound insights into the chemical stability of moisture-sensitive APIs in tablets.
    Matched MeSH terms: Excipients
  2. Azman SEN, Abd Razak FS, Kamal WHBW, Zheng GK, Ming LC, Uddin AH, et al.
    Int J Pharm Compd, 2020 11 21;24(6):509-514.
    PMID: 33217741
    Orally disintegrating tablets are a solid dosage form that will disintegrate rapidly within 3 minutes upon contact with saliva. Fillers or diluents are excipients that are used to make up the volume of orally disintegrating tablets, and some might act as a disintegrant or binder that will affect the physical properties of orally disintegrating tablets. The objective of this study was to formulate and evaluate physical properties of orally disintegrating tablets containing Annona muricata leaves extract by a freeze-drying method using different fillers at different concentrations. In this study, fifteen formulations of orally disintegrating tablets were prepared by a freeze-drying method with different fillers such as starch, lactose, microcrystalline cellulose, StarLac, and CombiLac at 5%, 10%, and 15%. The orally disintegrating tablets were evaluated for hardness, thickness, weight variation, friability, and disintegration time test. The optimum formulation was chosen and incorporated with Annona muricata leaves extract. The results obtained in this work indicated that Formulation 3, with 15% starch, was the most optimum formulation due to the shortest disintegration time (21.08 seconds ± 4.24 seconds), and all the physical tests were within the acceptable range. The orally disintegrating tablets containing Annona muricata leaves extract possessed antioxidant activity and stable at least for 3 months under 60°C and 75% relative humidity.
    Matched MeSH terms: Excipients*
  3. Muthudoss P, Kumar S, Ann EYC, Young KJ, Chi RLR, Allada R, et al.
    J Pharm Biomed Anal, 2022 Feb 20;210:114581.
    PMID: 35026592 DOI: 10.1016/j.jpba.2022.114581
    Particle size distribution (PSD), spatial location and particle cluster size of ingredients, polymorphism, compositional distribution of a pharmaceutical product are few of the most important attributes in establishing the drug release-controlling microstructural and solid state properties that would be used to (re)design or reproduce similar products. There are numerous solid-state techniques available for PSD analysis. Laser diffraction (LD) is mostly used to study PSD of raw materials. However, a constraint of LD is the interference between the active pharmaceutical ingredients (API) and excipients, where it is very challenging to measure API size in a tablet. X-ray powder diffraction (XRPD) is widely employed in establishing the polymorphism of API and excipients. This research examined a commercial osmotic tablet in terms of extracting solid state properties of API and functional excipient by Raman Imaging. Establishing repeatability, reproducibility, and sample representativeness when the samples are non-uniform and inhomogeneous necessitates multiple measurements. In such scenarios, when employing imaging-based techniques, it can be time-consuming and tedious. Advanced statistical methodologies are used to overcome these disadvantages and expedite the characterization process. Overall, this study demonstrates that Raman imaging can be employed as a non-invasive and effective offline method for assessing the solid-state characteristics of API and functional excipients in complex dosage forms like osmotic tablets.
    Matched MeSH terms: Excipients*
  4. Anarjan N, Nehdi IA, Sbihi HM, Al-Resayes SI, Malmiri HJ, Tan CP
    Molecules, 2014 Sep 10;19(9):14257-65.
    PMID: 25211006 DOI: 10.3390/molecules190914257
    The incorporation of lipophilic nutrients, such as astaxanthin (a fat soluble carotenoid) in nanodispersion systems can either increase the water solubility, stability and bioavailability or widen their applications in aqueous food and pharmaceutical formulations. In this research, gelatin and its combinations with sucrose oleate as a small molecular emulsifier, sodium caseinate (SC) as a protein and gum Arabic as a polysaccharide were used as stabilizer systems in the formation of astaxanthin nanodispersions via an emulsification-evaporation process. The results indicated that the addition of SC to gelatin in the stabilizer system could increase the chemical stability of astaxanthin nanodispersions significantly, while using a mixture of gelatin and sucrose oleate as a stabilizer led to production of nanodispersions with the smallest particle size (121.4±8.6 nm). It was also shown that a combination of gelatin and gum Arabic could produce optimal astaxanthin nanodispersions in terms of physical stability (minimum polydispersity index (PDI) and maximum zeta-potential). This study demonstrated that the mixture of surface active compounds showed higher emulsifying and stabilizing functionality compared to using them individually in the preparation of astaxanthin nanodispersions.
    Matched MeSH terms: Excipients/chemistry*
  5. Almurisi SH, Doolaanea AA, Akkawi ME, Chatterjee B, Ahmed Saeed Aljapairai K, Islam Sarker MZ
    Drug Dev Ind Pharm, 2020 Aug;46(8):1373-1383.
    PMID: 32619118 DOI: 10.1080/03639045.2020.1791165
    OBJECTIVE: Paracetamol is a common antipyretic and analgesic medicine used in childhood illness by parents and physicians worldwide. Paracetamol has a bitter taste that is considered as a significant barrier for drug administration. This study aimed to develop an oral dosage form that is palatable and easy to swallow by pediatric patients as well as to overcome the shortcomings of liquid formulations.

    METHODS: The paracetamol was encapsulated in beads, which were prepared mainly from alginate and chitosan through electrospray technique. The paracetamol beads were sprinkled on the instant jelly prepared from glycine, ι-carrageenan and calcium lactate gluconate. The paracetamol instant jelly characteristics, in terms of physical appearance, texture, rheology, in vitro drug release and palatability were assessed on a human volunteer.

    RESULTS: The paracetamol instant jelly was easily reconstituted in 20 mL of water within 2 min to form jelly with acceptable consistency and texture. The jelly must be ingested within 30 min after reconstitution to avoid the bitter taste. The palatability assessment carried out on 12 human subjects established the similar palatability and texture of the paracetamol instant jelly dosage comparable to the commercial paracetamol suspension and was found to be even better in overcoming the aftertaste of paracetamol.

    CONCLUSION: Such findings indicate that paracetamol instant jelly will compensate for the use of sweetening and flavoring agents as well as develop pediatric dosage forms with limited undesired excipients.

    Matched MeSH terms: Excipients*
  6. Azmi NHS, Ming LC, Uddin ABMH, Sarker ZI, Bin LK
    Int J Pharm Compd, 2022 1 27;26(1):80-87.
    PMID: 35081048
    Oral drug delivery has been recognized as the most desirable drug administration method among other drug delivery routes due to its ease of administration, long shelf life, and low cost. Orally disintegrating tablets disintegrate within seconds in the mouth without the need of water for swallowing. This unique feature of orally disintegrating tablets is favorable to special populations such as geriatric and pediatric patients. Formulation optimization is significant to obtain the optimal combination of tablet constituents, as the tablet composition is influential on dosage-form characteristics. The objective of this study was to investigate the effect of different types of fillers and percentage on the physical properties of orally disintegrating tablets by using amlodipine as the model drug. Blank orally disintegrating tablets containing different fillers, namely, Sorbolac 400, Granulac 200, and CombiLac with different percentages, were prepared using the wet granulation method and were evaluated based on weight variation, hardness, thickness, friability, and disintegration time. Formulation 5 that consists of 25% Granulac 200 showed the optimal result among all formulations with the fastest disintegration time (96.17 s Å} 18.40) and sufficient tablet hardness (4.59 kg Å} 0.70). Hence, formulation 5 was selected as the optimal formulation and incorporated with amlodipine. From this study, it can be concluded that excipients have an essential role in determining the physical properties of orally disintegrating tablets.
    Matched MeSH terms: Excipients*
  7. Goh CF, Hadgraft J, Lane ME
    Int J Pharm, 2022 Feb 25;614:121447.
    PMID: 34998922 DOI: 10.1016/j.ijpharm.2021.121447
    For effective topical and transdermal drug delivery, it is necessary for most actives to penetrate and permeate through the stratum corneum (SC). Extensive investigation of the thermal behaviour of mammalian SC has been performed to understand the barrier function of the skin. However, little attention has been paid to the related experimental variables in thermal analysis of the SC using differential scanning calorimetry that may influence the results obtained from such studies. In this review, we provide a comprehensive overview of the thermal transitions of the SC of both porcine and human skin. More importantly, the selection and impact of the experimental and instrumental parameters used in thermal analysis of the SC are critically evaluated. New opportunities for the use of thermal analysis of mammalian SC in advancing skin research, particularly for elucidation of the actions of excipients employed in topical and transdermal formulations on the skin are also highlighted.
    Matched MeSH terms: Excipients/metabolism
  8. Kumar P, Chaudhary B, Jain V, Baboota S, Shivanandy P, Alharbi KS, et al.
    Curr Drug Deliv, 2023;20(9):1262-1274.
    PMID: 36380413 DOI: 10.2174/1567201820666221114113637
    Molecular pharmaceutics play a critical role in the drug delivery system, representing the direct interconnection of drug bioavailability with its molecular form. There is a diversity in the molecular structures by which it affects its properties, such as amorphous form, crystalline form, partialamorphous molecular dispersion, and disordered state. The active pharmaceutical ingredient (API) and the excipients utilized in the formulation process contain various divergent modes used in the formulation process. They include better formulations of any type to obtain good quality pharmaceutical products. This review reveals how the molecular states affect the API and are important in maintaining the quality of dosage forms. Furthermore, the physio-chemical properties of the components and various pharmaceutical approaches employed in the formulation of dosage forms are studied from the point of view of molecular pharmaceutics.
    Matched MeSH terms: Excipients/chemistry
  9. Mulenga G, Alahmed TAA, Sami F, Majeed S, Ali MS, Le JLJ, et al.
    AAPS PharmSciTech, 2024 Jun 11;25(5):134.
    PMID: 38862663 DOI: 10.1208/s12249-024-02845-3
    Inclusion complexes require higher concentration of Beta cyclodextrins (βCD) resulting in increased formulation bulk, toxicity, and production costs. This systematic review offers a comprehensive analysis using Quality by design (QbD) as a tool to predict potential applications of Polyvinylpyrrolidone (PVP) as a ternary substance to address issues of inclusion complexes. We reviewed 623 documents from 2013 to 2023 and Eighteen (18) research papers were selected for statistical and meta-analysis using the QbD concept to identify the most critical factors for selecting drugs and effect of PVP on inclusion complexes. The QbD analysis revealed that Molecular weight (MW), Partition coefficient (Log P), and the auxiliary substance ratio directly affected complexation efficiency (CE), thermodynamic stability in terms of Gibbs free energy (ΔG), and percent drug release. However, Stability constant (Ks) remained unaffected by any of these parameters. The results showed that low MW (250), median Log P (6), and a βCD: PVP ratio of 2:3 would result in higher CE, lower G, and improved drug release. PVP improves drug solubility, enhances delivery and therapeutic outcomes, and counteracts increased drug ionization due to decreased pH. In certain cases, its bulky nature and hydrogen bonding with CD molecules can form non-inclusion complexes. The findings of the study shows that there is potential molecular interaction between PVP and β-cyclodextrins, which possibly enhances the stability of inclusion complexes for drug with low MW and log P values less than 9. The systematic review shows a comprehensive methodology based on QbD offers a replicable template for future investigations into drug formulation research.
    Matched MeSH terms: Excipients/chemistry
  10. Abdellah A, Noordin MI, Wan Ismail WA
    Saudi Pharm J, 2015 Jan;23(1):9-13.
    PMID: 25685037 DOI: 10.1016/j.jsps.2013.06.003
    Pharmaceutical excipients are no longer inert materials but it is effective and able to improve the characteristics of the products' quality, stability, functionality, safety, solubility and acceptance of patients. It can interact with the active ingredients and alter the medicament characteristics. The globalization of medicines' supply enhances the importance of globalized good manufacturing practice (GMP) requirements for pharmaceutical excipients. This review was intended to assess the globalization status of good manufacturing practice (GMP) requirements for pharmaceutical excipients. The review outcomes demonstrate that there is a lack of accurately defined methods to evaluate and measure excipients' safety. Furthermore good manufacturing practice requirements for excipients are not effectively globalized.
    Matched MeSH terms: Excipients
  11. Khachatryan V, Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2016 Feb 19;116(7):071801.
    PMID: 26943527 DOI: 10.1103/PhysRevLett.116.071801
    A search for narrow resonances in proton-proton collisions at sqrt[s]=13  TeV is presented. The invariant mass distribution of the two leading jets is measured with the CMS detector using a data set corresponding to an integrated luminosity of 2.4  fb^{-1}. The highest observed dijet mass is 6.1 TeV. The distribution is smooth and no evidence for resonant particles is observed. Upper limits at 95% confidence level are set on the production cross section for narrow resonances with masses above 1.5 TeV. When interpreted in the context of specific models, the limits exclude string resonances with masses below 7.0 TeV, scalar diquarks below 6.0 TeV, axigluons and colorons below 5.1 TeV, excited quarks below 5.0 TeV, color-octet scalars below 3.1 TeV, and W^{'} bosons below 2.6 TeV. These results significantly extend previously published limits.
    Matched MeSH terms: Excipients
  12. Syahida-Emiza S, Sam YY, Siti-Munirah MY
    PhytoKeys, 2020;165:51-62.
    PMID: 33192145 DOI: 10.3897/phytokeys.165.56955
    Two new Codonoboea species, C. kenaboiensis Syahida-Emiza, Y.Y.Sam & Siti-Munirah and C. ruthiae Syahida-Emiza, Y.Y. Sam & Siti-Munirah were discovered from the Kenaboi State Park, Peninsular Malaysia. Descriptions, illustrations, colour plates and provisional conservation status are provided.
    Matched MeSH terms: Excipients
  13. Rahman NFA, Shamsudin R, Ismail A, Karim Shah NNA
    Food Sci Biotechnol, 2016;25(Suppl 1):85-90.
    PMID: 30263490 DOI: 10.1007/s10068-016-0102-y
    Changes in physicochemical properties of moisture, ash, and fat contents, and color, due to freeze and oven post-drying treatments on flavedo, albedo, and lamella pomelo fruit peels were investigated. Physicochemical properties influence consumer acceptability and only a few studies are known. Pomelo peels were subjected to freeze drying and conventional drying at 60°C. Fresh pomelo peel was used as a control. Post-drying treatment changes in moisture, ash, and fat contents were observed, compared to controls. Minimal color changes were observed for freeze drying, compared with oven drying for flavedo, albedo, and lamella. Useful information for evaluation of drying treatments that can be used on pomelo peels is provided.
    Matched MeSH terms: Excipients
  14. Norizzah, A.R., Junaida, A.R., Maryam ‘Afifah, A.L.
    MyJurnal
    The aim of this study was to determine the effects of xanthan gum and carrageenan on the
    oil uptake and acceptability of banana (Musa acuminate) fritters during repeated deep fat
    frying. Banana namely ‘Pisang Awak’ at maturity stage 6 were peeled, cut and dipped into 3
    batter formulations containing 1% carrageenan, 1% xanthan gum and a control. The bananas
    were deep fried at 170±5°C for 3 minutes in 2.5L cooking oil without oil replenishment for
    3 consecutive days. The moisture, oil content, texture, colour and acceptability of the banana
    fritters were evaluated at first and every 10th frying cycles. Results indicated that the oil and
    moisture content of fried bananas were dependent on frying cycles. The oil content increased
    while the moisture decreased with increased in frying cycles. There was significant reduction
    (p0.05) in terms of overall acceptance between
    treated and untreated. Hence, 1% xanthan gum was effective in reducing oil absorption of
    banana fritters without affecting the overall sensory acceptability
    Matched MeSH terms: Excipients
  15. Phang, Y.L., Chan, H.K.
    MyJurnal
    A study was done on the feasibility of inulin, a fructooligosaccharides with the health benefits of prebiotic, as partial sugar replacer in “kaya” by investigating the effects of different substitution levels (0%; control, 10%, 30% and 50%) on the sensory properties. The samples were investigated by 10 descriptive panelists for colour, sweetness, smoothness, firmness, adhesiveness and spreadability attributes before further evaluated by 100 consumers for acceptance levels. Consistent with the descriptive panel, the evaluation by the consumers showed formulated samples at 10% and 30% were comparable to the commercial “kaya” being no significant difference (p>0.05) found in acceptability scores. 50% substitution received lower acceptability scores and was significantly different (p
    Matched MeSH terms: Excipients
  16. Maskat, M.Y, Tan, S.M.
    MyJurnal
    Extract of mengkudu was heated using a bench-top tube heat exchanger at 30, 50, 70 and 90 o C for 0, 5, 10 and 15 min residence time. The treated mengkudu extract was then measured for pH, L * , a * , b * color parameters, clarity, viscosity and total polyphenol content. Results show that heating using temperature of 30 to 90 o C for 5 to 15 mins significantly (p
    Matched MeSH terms: Excipients
  17. Aziz Mohamed, A., Hafizal Yazid, Sahrim Ahmad, Rozaidi Rasid, Jaafar Abdullah, Dahlan, M., et al.
    MyJurnal
    L18 orthogonal array in mix level of Taguchi robust design method was carried out to optimize experimental conditions for the preparation of polymer blend composite. Tensile strength and neutron absorption of the composite were the properties of interest. Filler size, filler loading, ball mixing time and dispersion agent concentration were selected as parameters or factors which are expected to affect the composite properties. As a result of Taguchi analysis, filler loading was the most influencing parameter on the tensile strength and neutron absorption. The least influencing was ball-mixing time. The optimal conditions were determined by using mix-level Taguchi robust design method and a polymer composite with tensile strength of 6.33 MPa was successfully prepared. The composite was found to fully absorb thermal neutron flux of 1.04 x 105n/cm2/s with only 2 mm in thickness. In addition, the filler was also characterized by scanning electron microscopy (SEM) and elemental analysis (EDX).
    Matched MeSH terms: Excipients
  18. Hafizal Yazid, Sahrim Ahmad, Aziz Mohamed, A., Dahlan, H.M., M. Rawi M. Z., Megat Harun, M.A., et al.
    MyJurnal
    The thermal conductivity of boron carbide filled thermoplastic natural rubber blend composite is studied experimentally as a function of filler loading and filler size. A polymer blend of 60/40 NR/HDPE was used as matrix for incorporation of particulate nano- and micro-sized B4C as filler to form the composite. As the filler loading is increased from 2-10%wt, a reduction and increment of thermal conductivity was observed. The results show at lower filler loading, HDPE crystallinity affects the thermal conductivity up to 4 and 6%wt of filler for nano- and micro-composite respectively. Further increase the loading do not much alter the crystallinity as the filler is distributed in continues phase of NR. The increment of filler amount in the amorphous NR causes the thermal conductivity to gradually increase which indicates the formation of interconnecting filler network structures
    Matched MeSH terms: Excipients
  19. Meor Yusoff, M.S., Masliana Muslimin, Fadlullah Jili Fursani
    MyJurnal
    The paper relates a study on the development of an analysis procedure for measuring the gold coating thickness using EDXRF technique. Gold coating thickness was measured by relating the counts under the Au Lα peak its thickness value. In order to get a reasonably accurate result, a calibration graph was plotted using five gold-coated reference standards of different thicknesses. The calibration graph shows a straight line for thin coating measurement until 0.9μm. Beyond this the relationship was not linear and this may be resulted from the selfabsorption effect. Quantitative analysis was also performed on two different samples of goldcoated jewelry and a phone connector. Result from the phone connector analysis seems to agree with the manufacturer’s gold coating value. From the analysis of gold-coated jewelry it had been able to differentiate the two articles as gold wash and gold electroplated.
    Matched MeSH terms: Excipients
  20. Ding SH, Ng TYS, Chew TL, Oh PC, Ahmad AL, Ho CD
    Polymers (Basel), 2019 Oct 23;11(11).
    PMID: 31652828 DOI: 10.3390/polym11111732
    Mixed matrix membranes (MMMs) separation is a promising technology for gas permeation and separation involving carbon dioxide (CO2). However, finding a suitable type of filler for the formation of defect-free MMMs with enhancement in gas permeability remains a challenge. Current study focuses on synthesis of KIT-6 silica and followed by the incorporation of KIT-6 silica as filler into polysulfone (PSF) polymer matrix to fabricate MMMs, with filler loadings of 0-8 wt %. The effect of KIT-6 incorporation on the properties of the fabricated MMMs was evaluated via different characterization techniques. The MMMs were investigated for gas permeability and selectivity with pressure difference of 5 bar at 25 °C. KIT-6 with typical rock-like morphology was synthesized. Incorporation of 2 wt % of KIT-6 into PSF matrix produced MMMs with no void. When KIT-6 loadings in the MMMs were increased from 0 to 2 wt %, the CO2 permeability increased by ~48%, whereas the ideal CO2/CH4 selectivity remained almost constant. However, when the KIT-6 loading in PSF polymer matrix was more than 2 wt %, the formation of voids in the MMMs increased the CO2 permeability but sacrificed the ideal CO2/CH4 selectivity. In current study, KIT-6 was found to be potential filler for PSF matrix under controlled KIT-6 loading for gas permeation.
    Matched MeSH terms: Excipients
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links