Displaying publications 1 - 20 of 71 in total

Abstract:
Sort:
  1. Youth–adult partnership: exploring contributions to empowerment, agency and community connections in Malaysian youth programs
    Krauss SE, Collura J, Zeldin S, Ortega A, Abdullah H, Sulaiman AH
    J Youth Adolesc, 2014 Sep;43(9):1550-62.
    PMID: 24122395
    Youth–adult partnership (Y–AP) has emerged as a key practice for enacting two features of effective developmental settings: supportive adult relationships and support for efficacy and mattering. Previous studies have shown that when youth, supported by adults, actively participate in organizational and community decision making they are likely to show greater confidence and agency, empowerment and critical consciousness, and community connections. Most of the extant research on Y–AP is limited to qualitative studies and the identification of organizational best practices. Almost all research focuses on Western sociocultural settings. To address these gaps, 299 youth, age 15 to 24, were sampled from established afterschool and community programs in Malaysia to explore the contribution of Y–AP (operationalized as having two components: youth voice in decision-making and supportive adult relationships) to empowerment, agency and community connections. As hypothesized, hierarchical regressions indicated that program quality (Y–AP, safe environment and program engagement) contributed to agency, empowerment and community connections beyond the contribution of family, school and religion. Additionally, the Y–AP measures contributed substantially more variance than the other measures of program quality on each outcome. Interaction effects indicated differences by age for empowerment and agency but not for community connections. The primary findings in this inquiry replicate those found in previous interview and observational-oriented studies. The data suggests fertile ground for future research while demonstrating that Y–AP may be an effective practice for positive youth development outside of Western settings.
  2. Fulltext Use of newly available febuxostat in a case of chronic tophaceous gout contraindicated to allopurinol and probenecid
    Abdullah H, Asmahan MI, Rosman A
    Med J Malaysia, 2012 Feb;67(1):125-6.
    PMID: 22582566 MyJurnal
    Urate lowering therapy in this country has mainly been achieved by the use of allopurinol and probenecid. A new xanthine oxidase inhibitor called febuxostat has been approved in 2009 for treatment of hyperuricaemia in gout. In this report, we describe the management of a patient with chronic tophaceous gout using febuxostat. The reduction in serum uric acid to target levels was rapid, and the tophi size had also reduced significantly while on therapy. There was no unwanted side effect observed during the therapy. Therefore, febuxostat would be a useful alternative drug in the treatment of hyperuricaemia in gout patients who have contraindications to allopurinol and probenecid.
    Study site: Rheumatology clinic, Selayang Hospital, Kuala Lumpur, Malaysia
  3. Undiagnosed acute phase endobronchial tuberculosis with progression to irreversible tracheobronchial stenosis
    Abdullah H, Quek CZ
    BMJ Case Rep, 2017 Aug 07;2017.
    PMID: 28784877 DOI: 10.1136/bcr-2017-219877
  4. Triggering Mechanisms of Thermosensitive Nanoparticles Under Hyperthermia Condition
    Dabbagh A, Abdullah BJ, Abdullah H, Hamdi M, Kasim NH
    J Pharm Sci, 2015 Aug;104(8):2414-28.
    PMID: 26073304 DOI: 10.1002/jps.24536
    Nanoparticle-based hyperthermia is an effective therapeutic approach that allows time- and site-specific treatment with minimized off-site effects. The recent advances in materials science have led to design a diversity of thermosensitive nanostructures that exhibit different mechanisms of thermal response to the external stimuli. This article aims to provide an extensive review of the various triggering mechanisms in the nanostructures used as adjuvants to hyperthermia modalities. Understanding the differences between various mechanisms of thermal response in these nanostructures could help researchers in the selection of appropriate materials for each experimental and clinical condition as well as to address the current shortcomings of these mechanisms with improved material design.
  5. Fulltext Topographically Distinguished Microbiome Taxonomy and Stress-Response Genes of Royal Belum Rainforest and Raja Muda Musa Peat Swamp Revealed through Metagenomic Inquisition
    Ahmad MF, Abdullah H, Hassan MN, Jamaludin MI, Sivam A, Komatsu K, et al.
    Int J Mol Sci, 2023 Jan 03;24(1).
    PMID: 36614337 DOI: 10.3390/ijms24010872
    Soil ecosystems are home to a diverse range of microorganisms, but they are only partially understood because no single-cell sequencing or whole-community sequencing provides a complete picture of these complex communities. Using one of such metagenomics approaches, we succeeded in monitoring the microbial diversity and stress-response gene in the soil samples. This study aims to test whether known differences in taxonomic diversity and composition are reflected in functional gene profiles by implementing whole gene sequencing (WGS) metagenomic analysis of geographically dispersed soils from two distinct pristine forests. The study was commenced by sequencing three rainforest soil samples and three peat swamp soil samples. Soil richness effects were assessed by exploring the changes in specific functional gene abundances to elucidate physiological constraints acting on different soil systems and identify variance in functional pathways relevant to soil biogeochemical cycling. Proteobacteria shows abundances of microbial diversity for 52.15% in Royal Belum Reserved Forest and 48.28% in Raja Musa; 177 out of 1,391,841 and 449 out of 3,586,577 protein coding represent acidic stress-response genes for Royal Belum and Raja Musa, respectively. Raja Musa indicates pH 2.5, which is extremely acidic. The analysis of the taxonomic community showed that Royal Belum soils are dominated by bacteria (98% in Sungai Kooi (SK), 98% in Sungai Papan (SP), and 98% in Sungai Ruok (SR), Archaea (0.9% in SK, 0.9% in SP, and 1% in SR), and the remaining were classed under Eukaryota and viruses. Likewise, the soils of Raja Muda Musa are also dominated by bacteria (95% in Raja Musa 1 (RM1), 98% in Raja Musa 2 (RM2), and 96% in Raja Musa 3 (RM3)), followed by Archaea (4% in RM1, 1% in RM2, and 3% in RM3), and the remaining were classed under Eukaryota and viruses. This study revealed that RBFR (Royal Belum Foresr Reserve) and RMFR (Raja Musa Forest Reserve) metagenomes contained abundant stress-related genes assigned to various stress-response pathways, many of which did not show any difference among samples from both sites. Our findings indicate that the structure and functional potential of the microbial community will be altered by future environmental potential as the first glimpse of both the taxonomic and functional composition of soil microbial communities.
  6. Fulltext Thermal Annealing Effect on Structural, Morphological, and Sensor Performance of PANI-Ag-Fe Based Electrochemical E. coli Sensor for Environmental Monitoring
    Mohammad Naim N, Abdullah H, Umar AA, Abdul Hamid A, Shaari S
    ScientificWorldJournal, 2015;2015:696521.
    PMID: 26078996 DOI: 10.1155/2015/696521
    PANI-Ag-Fe nanocomposite thin films based electrochemical E. coli sensor was developed with thermal annealing. PANI-Ag-Fe nanocomposite thin films were prepared by oxidative polymerization of aniline and the reduction process of Ag-Fe bimetallic compound with the presence of nitric acid and PVA. The films were deposited on glass substrate using spin-coating technique before they were annealed at 300 °C. The films were characterized using XRD, UV-Vis spectroscopy, and FESEM to study the structural and morphological properties. The electrochemical sensor performance was conducted using I-V measurement electrochemical impedance spectroscopy (EIS). The sensitivity upon the presence of E. coli was measured in clean water and E. coli solution. From XRD analysis, the crystallite sizes were found to become larger for the samples after annealing. UV-Vis absorption bands for samples before and after annealing show maximum absorbance peaks at around 422 nm-424 nm and 426 nm-464 nm, respectively. FESEM images show the diameter size for nanospherical Ag-Fe alloy particles increases after annealing. The sensor performance of PANI-Ag-Fe nanocomposite thin films upon E. coli cells in liquid medium indicates the sensitivity increases after annealing.
  7. The use of implants in the occlusal rehabilitation of a partially edentulous patient: a clinical report
    Yunus N, Abdullah H, Hanapiah F
    J Prosthet Dent, 2001 Jun;85(6):540-3.
    PMID: 11404753
    This article describes the occlusal rehabilitation of a partially edentulous patient who did not want a removable partial denture. Implants and extensive fixed restorations were used to restore posterior support and treat severely worn dentition, respectively. The treatment offered the patient a functional and esthetic result.
  8. Fulltext The use of febuxostat for gout in Hospital Tengku Ampuan Afzan (HTAA) Kuantan. [Abstract]
    Abdullah H
    International Medical Journal Malaysia, 2017;16(11):50.
    MyJurnal
    Introduction: Febuxostat is a non-purine-selective oral xanthine oxidase inhibitor drug, and is an alternative to Allopurinol to lower serum uric acid in gout patients. It is probably more effective than Allopurinol, however, its use is limited because of its cost and availability. Allopurinol has been the mainstay treatment for gout for about 50 years. However, its use has been associated with allergic reactions especially in patients with renal impairment.The objective of this study was to describe HTAA Rheumatology Unit experiences with Febuxostat in the management of gout.
    Materials and method: Case records belonging to 6 patients who had been started on Febuxostat between January 2012 and January 2017 were analysed.
    Results: The majority of patients on Febuxostat were males (83.3%) as well as Malays (83.3%). About 66.7% of patients had already developed mild to moderate chronic kidney disease (GFR between 30-89 mL/min) due to multifactorial causes by the time they were started on Febuxostat. Also 33% of patients had mild liver impairment (ALT & AST < 1.5 ULN) due to fatty liver prior to Febuxostat. All patients had been started on Febuxostat due to allergic reactions to Allopurinol. All patients were on Febuxostat 40 mg once a day. Following Febuxostat, a significant decrease in the uric acid levels much closer to the target level i.e. less than 360 µmol/L were achieved in all patients. Only 1 patient (16.7%) developed a side effect i.e. ALT > 1.5 ULN while the rest tolerated the drug very well.
    Conclusion: Although the number of patients analysed was small, Febuxostat was shown to be very effective and safe for use in patients with gout even with concomitant mild to moderate renal impairment. Serum uric acid levels reduced significantly while on the lowest dose of 40 mg once a day.
  9. The impact of CO2 emissions on economic growth: evidence from selected higher CO2 emissions economies
    Azam M, Khan AQ, Bin Abdullah H, Qureshi ME
    Environ Sci Pollut Res Int, 2016 Apr;23(7):6376-89.
    PMID: 26620862 DOI: 10.1007/s11356-015-5817-4
    The main purpose of this work is to analyze the impact of environmental degradation proxied by CO2 emissions per capita along with some other explanatory variables namely energy use, trade, and human capital on economic growth in selected higher CO2 emissions economies namely China, the USA, India, and Japan. For empirical analysis, annual data over the period spanning between 1971 and 2013 are used. After using relevant and suitable tests for checking data properties, the panel fully modified ordinary least squares (FMOLS) method is employed as an analytical technique for parameter estimation. The panel group FMOLS results reveal that almost all variables are statistically significant, whereby test rejects the null hypotheses of non cointegration, demonstrating that all variables play an important role in affecting the economic growth role across countries. Where two regressors namely CO2 emissions and energy use show significantly negative impacts on economic growth, for trade and human capital, they tend to show the significantly positive impact on economic growth. However, for the individual analysis across countries, the panel estimate suggests that CO2 emissions have a significant positive relationship with economic growth for China, Japan, and the USA, while it is found significantly negative in case of India. The empirical findings of the study suggest that appropriate and prudent policies are required in order to control pollution emerging from areas other than liquefied fuel consumption. The ultimate impact of shrinking pollution will help in supporting sustainable economic growth and maturation as well as largely improve society welfare.
  10. The effect of temperature change on the working and setting time of two luting cements
    Abdullah H, Pearson GJ
    Asian J Aesthet Dent, 1993 Jul;1(2):91-4.
    PMID: 7921802
    The effect of temperature change on the working and setting time of a glass ionomer luting cement and a resin luting cement was measured using the oscillating rheometer. The time taken for each cement to set was calculated from the chart recordings. It was observed that as the temperature increased, the working and setting time of both materials decreased. However, the reduction was much more marked for the dual curing resin cement.
  11. Fulltext The Role of Semipurified Fractions Isolated from Quercus infectoria on Bone Metabolism by Using hFOB 1.19 Human Fetal Osteoblast Cell Model
    Abdullah AR, Hapidin H, Abdullah H
    Evid Based Complement Alternat Med, 2018;2018:5319528.
    PMID: 29861772 DOI: 10.1155/2018/5319528
    Background. Quercus infectoria (QI) is a plant used in traditional medicines in Asia. The plant was reported to contain various active phytochemical compounds that have potential to stimulate bone formation. However, the precise mechanism of the stimulation effect of QI on osteoblast has not been elucidated. The present study was carried out to isolate QI semipurified fractions from aqueous QI extract and to delineate the molecular mechanism of QI semipurified fraction that enhanced bone formation by using hFOB1.19 human fetal osteoblast cell model. Methods. Isolation of QI semipurified fractions was established by means of column chromatography and thin layer chromatography. Established QI semipurified fractions were identified using Liquid Chromatography-Mass Spectrometry (LC-MS). Cells were treated with derived QI semipurified fractions and investigated for mineralization deposition and protein expression level of BMP-2, Runx2, and OPN by ELISA followed gene expression analysis of BMP-2 and Runx2 by RT-PCR. Results. Column chromatography isolation and purification yield Fractions A, B, and C. LC-MS analysis reveals the presence of polyphenols in each fraction. Results show that QI semipurified fractions increased the activity and upregulated the gene expression of BMP-2 and Runx2 at day 1, day 3, and day 7. OPN activity increased in cells treated with QI semipurified fractions at day 1 and day 3. Meanwhile, at day 7, expression of OPN decreased in activity. Furthermore, the study showed that combination of Fractions A, B, and C with osteoporotic drug (pamidronate) further increased the activity and upregulated the gene expression of BMP-2 and Runx2. Conclusions. These findings demonstrated that polyphenols from semipurified fractions of QI enhanced bone formation through expression of the investigated bone-related marker that is its potential role when combined with readily available osteoporotic drug.
  12. Techno-economic optimization and Nox emission reduction through steam injection in gas turbine combustion chamber for waste heat recovery and water production
    Hai T, El-Shafay AS, Goyal V, Alshahri AH, Almujibah HR
    Chemosphere, 2023 Sep 01.
    PMID: 37660791 DOI: 10.1016/j.chemosphere.2023.139782
    Considering the persistent human need for electricity and fresh water, cogeneration systems based on the production of these two products have attracted the attention of researchers. This study investigates a cogeneration system of electricity and fresh water based on gas turbine (GT) as the prime mover. The wasted energy of the GT exhaust gases is absorbed by a heat recovery steam generator (HRSG) and supplies the superheat steam required by the steam turbine (ST). In order to produce fresh water, a multi-effect desalination (MED) system is applied. The motive steam required is provided by extracting steam from the ST. In order to reduce the environmental pollution of this cogeneration system, the steam injection method is proposed in the GT's combustion chamber (CC). This system is optimized by a multi-objective optimization tool based on the Genetic Algorithm (GA). The design variables include pressure ratio of compressor (CPR), inlet temperature of gas turbine (TIT), steam injection mass flow rate in the CC, HRSG operating pressure, HRSG evaporator pinch point temperature difference (PPTD), steam pressure of the MED ejector, ejector motive steam flow rate, number of MED effects, and return effect. The goals are to minimize the total cost rate (TCR), which includes the cost of initial investment and maintenance of the system, the cost of consumed fuel, and the cost of disposing of CO and NO pollutants, as well as maximizing the exergy efficiency. In the end, it is observed that the steam injection in the CC leads to the reduction of the mentioned pollutant index, and it is proposed as a suitable solution to reduce the pollution of the proposed cogeneration system.
  13. Tannic acid enhances cisplatin effect on cell proliferation and apoptosis of human osteosarcoma cell line (U2OS)
    Kasiram MZ, Hapidin H, Abdullah H, Hashim NM, Azlina A, Sulong S
    Pharmacol Rep, 2022 Feb;74(1):175-188.
    PMID: 34652600 DOI: 10.1007/s43440-021-00330-3
    BACKGROUND: The increase in cases of chemoresistance of cisplatin for osteosarcoma treatment has called for the need to establish a new treatment regime. Tannic acid (TA) possesses a potent antiproliferative effect against various cancers. Therefore, this study investigated the effect of TA combined with cisplatin on human osteosarcoma cell lines (U2OS).

    METHODS: MTT assay was used to determine the half-maximal inhibitory concentration (IC50), while the combination index (CI) value was utilized to analyze the interaction within each combination. The antiproliferative effect of the treatment was evaluated by trypan blue exclusion assay. The morphological changes of cells were observed under a phase-contrast inverted microscope. The nuclear morphology and percentage of apoptosis cells were evaluated by using the Hoechst 33258 staining and annexin V/PI assay, respectively.

    RESULTS: The U2OS cells showed cytotoxic effect when treated with TA and cisplatin, with IC50 at 4.47 µg/mL and 16.25 µg/mL, respectively. The TA demonstrated no significant inhibition effect on the normal human fetal osteoblast cells (hFOB 1.19); yet, interestingly, a potent proliferative effect was indicated. Synergistic interaction was triggered when TA was combined with cisplatin at percentage ratios of 90:10 and 85:15. Meanwhile, antagonistic interaction was induced in the combination at percentage ratios of 75:25 and 50:50. On the other hand, a significant antiproliferative effect with prominent morphological alteration was detected in the cells treated with a combination of TA and cisplatin at the percentage ratio of 90:10. Additionally, combination-treated cells demonstrated the highest percentage of apoptosis cells, with distinct chromosomal condensation, nuclear fragmentation, reduction of nuclear volume, and notable apoptotic body.

    CONCLUSION: Therefore, there is a high potential for the inclusion of TA in the cisplatin-based chemotherapeutic regimen of osteosarcoma.

  14. Fulltext Synthesis of a nano-silver metal ink for use in thick conductive film fabrication applied on a semiconductor package
    Yung LC, Fei CC, Mandeep J, Binti Abdullah H, Wee LK
    PLoS One, 2014;9(5):e97484.
    PMID: 24830317 DOI: 10.1371/journal.pone.0097484
    The success of printing technology in the electronics industry primarily depends on the availability of metal printing ink. Various types of commercially available metal ink are widely used in different industries such as the solar cell, radio frequency identification (RFID) and light emitting diode (LED) industries, with limited usage in semiconductor packaging. The use of printed ink in semiconductor IC packaging is limited by several factors such as poor electrical performance and mechanical strength. Poor adhesion of the printed metal track to the epoxy molding compound is another critical factor that has caused a decline in interest in the application of printing technology to the semiconductor industry. In this study, two different groups of adhesion promoters, based on metal and polymer groups, were used to promote adhesion between the printed ink and the epoxy molding substrate. The experimental data show that silver ink with a metal oxide adhesion promoter adheres better than silver ink with a polymer adhesion promoter. This result can be explained by the hydroxyl bonding between the metal oxide promoter and the silane grouping agent on the epoxy substrate, which contributes a greater adhesion strength compared to the polymer adhesion promoter. Hypotheses of the physical and chemical functions of both adhesion promoters are described in detail.
  15. Fulltext Syntheses of hydroxyapatite from natural sources
    Mohd Pu'ad NAS, Koshy P, Abdullah HZ, Idris MI, Lee TC
    Heliyon, 2019 May;5(5):e01588.
    PMID: 31080905 DOI: 10.1016/j.heliyon.2019.e01588
    Waste materials from natural sources are important resources for extraction and recovery of valuable compounds. Transformation of these waste materials into valuable materials requires specific techniques and approaches. Hydroxyapatite (HAp) is a biomaterial that can be extracted from natural wastes. HAp has been widely used in biomedical applications owing to its excellent bioactivity, high biocompatibility, and excellent osteoconduction characteristics. Thus, HAp is gaining prominence for applications as orthopaedic implants and dental materials. This review summarizes some of the recent methods for extraction of HAp from natural sources including mammalian, aquatic or marine sources, shell sources, plants and algae, and from mineral sources. The extraction methods used to obtain hydroxyapatite are also described. The effect of extraction process and natural waste source on the critical properties of the HAp such as Ca/P ratio, crystallinity and phase assemblage, particle sizes, and morphology are discussed herein.
  16. Fulltext Structural, Morphological, and Electron Transport Studies of Annealing Dependent In2O3 Dye-Sensitized Solar Cell
    Mahalingam S, Abdullah H, Shaari S, Muchtar A, Asshari I
    ScientificWorldJournal, 2015;2015:403848.
    PMID: 26146652 DOI: 10.1155/2015/403848
    Indium oxide (In2O3) thin films annealed at various annealing temperatures were prepared by using spin-coating method for dye-sensitized solar cells (DSSCs). The objective of this research is to enhance the photovoltaic conversion efficiency in In2O3 thin films by finding the optimum annealing temperature and also to study the reason for high and low performance in the annealed In2O3 thin films. The structural and morphological characteristics of In2O3 thin films were studied via XRD patterns, atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), EDX sampling, and transmission electron microscopy (TEM). The annealing treatment modified the nanostructures of the In2O3 thin films viewed through FESEM images. The In2O3-450 °C-based DSSC exhibited better photovoltaic performance than the other annealed thin films of 1.54%. The electron properties were studied by electrochemical impedance spectroscopy (EIS) unit. The In2O3-450 °C thin films provide larger diffusion rate, low recombination effect, and longer electron lifetime, thus enhancing the performance of DSSC.
  17. Stress distributions in maxillary central incisors restored with various types of post materials and designs
    Madfa AA, Kadir MR, Kashani J, Saidin S, Sulaiman E, Marhazlinda J, et al.
    Med Eng Phys, 2014 Jul;36(7):962-7.
    PMID: 24834856 DOI: 10.1016/j.medengphy.2014.03.018
    Different dental post designs and materials affect the stability of restoration of a tooth. This study aimed to analyse and compare the stability of two shapes of dental posts (parallel-sided and tapered) made of five different materials (titanium, zirconia, carbon fibre and glass fibre) by investigating their stress transfer through the finite element (FE) method. Ten three-dimensional (3D) FE models of a maxillary central incisor restored with two different designs and five different materials were constructed. An oblique loading of 100 N was applied to each 3D model. Analyses along the centre of the post, the crown-cement/core and the post-cement/dentine interfaces were computed, and the means were calculated. One-way ANOVAs followed by post hoc tests were used to evaluate the effectiveness of the post materials and designs (p=0.05). For post designs, the tapered posts introduced significantly higher stress compared with the parallel-sided post (p<0.05), especially along the centre of the post. Of the materials, the highest level of stress was found for stainless steel, followed by zirconia, titanium, glass fibre and carbon fibre posts (p<0.05). The carbon and glass fibre posts reduced the stress distribution at the middle and apical part of the posts compared with the stainless steel, zirconia and titanium posts. The opposite results were observed at the crown-cement/core interface.
  18. Fulltext Social Identity, Core Self-Evaluation, School Adaptation, and Mental Health Problems in Migrant Children in China: A Chain Mediation Model
    Chen Y, Yu X, Ma'rof AA, Zaremohzzabieh Z, Abdullah H, Halimatusaadiah Hamsan H, et al.
    Int J Environ Res Public Health, 2022 Dec 11;19(24).
    PMID: 36554527 DOI: 10.3390/ijerph192416645
    (1) Background: The present study investigated the relationships between social identity, core self-evaluation, school adaptation, and mental health problems in migrant children, and the mechanism underlying these relationships; (2) Methods: The participants were migrant middle school students in China. Data analysis was conducted using SPSS version 26. A survey comprising the social identity scale, core self-evaluation scale, school adaptation scale, and mental health scale MMHI-60 was deployed; (3) Results: Findings indicated a significant and negative association between social identity and mental health problems, and such an association was sequentially mediated by core self-evaluation and school adaptation. Furthermore, core self-evaluation and school adaptation played a chain mediation role between social identity and migrant children's mental health problems; (4) Conclusions: It is crucial to improve social identity, core self-evaluation, and school adaptation to reduce mental health problems among this population. Therefore, the research results provide a new direction for promoting the development of mental health education for migrant workers and their children in China.
  19. Fulltext Smartphone addiction and phubbing behavior among university students: A moderated mediation model by fear of missing out, social comparison, and loneliness
    Safdar Bajwa R, Abdullah H, Zaremohzzabieh Z, Wan Jaafar WM, Abu Samah A
    Front Psychol, 2022;13:1072551.
    PMID: 36687837 DOI: 10.3389/fpsyg.2022.1072551
    INTRODUCTION: This article examines mediators and moderators that may explain the link between smartphone addiction and phubbing behavior using a sample of 794 university students.

    METHODS: A mediation model was tested to test the hypothesis that social comparison orientation and fear of missing out would mediate the link between smartphone addiction and phubbing behavior. Additionally, a moderated mediation model was leveraged to examine loneliness as a moderator within the hypothesized model. The data collected were analyzed using SPSS.

    RESULTS AND DISCUSSION: The findings show a significant positive relationship between smartphone addiction and phubbing behavior. The findings confirm the hypothesized associations and reveal that smartphone addiction is positively linked to phubbing behavior. The link, on the other hand, is partially and sequentially mediated by the fear of missing out and social comparison orientation. As a result, both mediators might be regarded as proximal variables of phubbing behavior. Moreover, the associations between both smart addiction and phubbing behaviors as well as social comparison orientation and phubbing behaviors are moderated by loneliness. These two effects were stronger for university students with high loneliness than for those with low loneliness. This study addresses a major gap in the clinical psychology literature through the attempt to explore the relationship between smartphone addiction and increased phubbing behavior among university students.

  20. Fulltext Risky sexual behavior among rural female adolescents in Malaysia: a limited role of protective factors
    Ahmadian M, Hamsan HH, Abdullah H, Samah AA, Noor AM
    Glob J Health Sci, 2014 May;6(3):165-74.
    PMID: 24762359 DOI: 10.5539/gjhs.v6n3p165
    PURPOSE: This paper presents the findings of a cross-sectional survey on the risk and protective factors of premarital sexual behavior among rural female adolescents in Peninsular Malaysia.
    METHODS: We investigated data on 770 female respondents aged 13-17 years in rural areas to identify predictive factors for premarital sexual intercourse. Data were analyzed using bivariate and multivariate regression. Specific socio-demographic factors, psychological and family domains, peer delinquency, and knowledge and attitudes about sexuality were considered in risky sexual behaviors in rural Malay girls. The effects of other covariates for premarital sexual intercourse were controlled by logistic regression model.
    RESULTS: Of the 770 rural female students, about 3.2% of respondents reported experience of sexual intercourse in the past three months. Out of those sexually active girls, 36% were 17 years old and 20% stated having sexual intercourse with more than one partner, and 72% did not use contraception during the most recent sexual intercourse. Midnight activities, peer-sexual disorder, self-evaluation, and attitude toward sexual health were significant predictors of sexual intercourse in rural girls in Malaysia.
    CONCLUSION: The finding highlights the impact of psychological factors and peer group influences on the challenges of premarital sexual behavior among rural girls and the notion of school-based sexual health education for adolescents. This study triggers other researchers take into account a comprehensive view of protective factors operating in adolescents' risky sexual behaviors in Asian culture seeing that family domain variables, unexpectedly, exerted no predicting influence on sexually active female teens in rural areas in Malaysia.
    Study site: 41 schools located in ten states of Peninsular Malaysia
Related Terms
    Try searching for something
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links