Kenaf fibre that is known as Hibiscus cannabinus, L. family Malvaceae is an herbaceous plant that can be grown under a wide range of weather conditions. The uses of kenaf fibres as a reinforcement material in the polymeric matrix have been widely investigated. It is known that epoxy has a disadvantage of brittleness and exhibits low toughness. In this research, liquid epoxidized natural rubber (LENR) was introduced to the epoxy to increase its toughness. Kenaf fibres, with five different fibre loadings of 5%, 10%, 15%, 20% and 25% by weight, were used to reinforce the epoxy resins (with and without addition of epoxidized natural rubber) as the matrices. The flexural strength, flexural modulus and fracture toughness of the rubber toughened epoxy reinforced kenaf fibre composites were investigated. The results showed that the addition of liquid epoxidized natural rubber (LENR) had improved the flexural modulus, flexural strength and fracture toughness by 48%, 30%, and 1.15% respectively at 20% fibre loading. The fractured surfaces of these composites were investigated by using scanning electron microscopic (SEM) technique to determine the interfacial bonding between the matrix and the fibre reinforcement.
The process of etching is the most crucial part of the work of manufacturing printed circuit boards (PCB). In the etching process by nitric acid, a spent etching waste solution of composition 250 g/L HNO3, 30-40 g/L Cu, 30-40 g/L Sn, 30-40 g/L Pb and 20-25 g/L Fe is produced. High metal concentrations in the spent etching waste solution make it a viable candidate for the recovery of metals. Recovery of metals from spent etching waste solution is a significant concern as the recent growth in production of printed circuit boards has generated a drastic increase of spent etching waste solution each year. This study concerns itself with the recovery of metals from spent etching waste. In this study a dilution was made in order to increase the pH of the solution as spent etching waste solution has high acidity, and the electrowinning method was performed to recover metals from the spent etching waste solution. Glassy carbon and platinum were used as cathode and anode in order to investigate the electrodeposition of metals and cyclic voltammetry investigation suggests that the deposition of metals on glassy carbon electrodes occurs at four different overpotentials mainly at -0.15 V, -0.35 V, -0.45 V and -0.75 V. Microscopy observation demonstrates that there is a deposition of metals by applying the potentials in a set of current-time transient study for a duration of 60 seconds and the metals recovered formed as aggregates.
This study aims to determine the combined effects of hydrolysis time, temperature, pH and ratio of enzyme to substrate on the degree of hydrolysis (DH) of silver catfish frame using Response Surface Methodology. The proximate compositions of silver catfish frame and silver catfish hydrolysate powder were determined as well. The effects of independent factors were described using a three-level factors Face Centered Central Composite design. The suggested hydrolysis conditions for obtaining the optimum DH using Alcalase® were – temperature of 55oC, hydrolysis time of 163 min, pH of substrate at 9.45 and an enzyme concentration of 2.0%. The generated model showed a quadratic fit with experimental data. Proximate analyses revealed that silver catfish frame contained 25.02% protein, 68.21% fat and 7.08% ash. While silver catfish frame hydrolysate powder contained 65.05% protein, 32.92% fat and 0.86% ash. The protein recovery in silver catfish frame hydrolysate was as high as 71.6%.
Silicon nanostructures have successfully been synthesized by thermal evaporation technique using nickel catalyst. Silicon powder served as starting source material was evaporated at high temperature (900-1100°C) in inert carrier gas. The grown silicon nanostructures were collected on (111) silicon substrate surface that positioned at varied location from source material. By controlling heating rate, gas flow rate, growth temperature and time, substrate position and location; to the optimum condition produced the best quality at silicon nanostructures. In this work, the best parameter to produce silicon nanostructures is system ramping up 1000°C at 20°C/min heating rate, N2 flow at 100ml/min; silicon needle-like one dimensional silicon nanostructures growth on vertically-positioned substrate located at 12cm from source material for 1 hour growth time. The effects of these parameters on the structures and physical of nanostructures were characterized by field emission scanning electron microscope and x-ray diffraction.
The central coast of Tamil Nadu, Andaman and Nicobar Islands, along with other regions, was severely hit by the tsunami on 26 December 2004. A strange spawning behaviour of the Indian horseshoe crabs (Tachypleus gigas, Müller) was observed after the tsunami disturbance. Along the northeast coast of India, the horseshoe crabs normally migrate towards the shore in large numbers coinciding with the tidal height and grain size of the sediment and spawn in nests made in sand. The spawning behaviour was normal until November 2004 and throughout that period about 35 to 45 nests in 200 m2 of area of the breeding beach were examined. However, no nesting was observed from December 2004 to March 2005, i.e. after the occurrence of tsunami. The number of nests per 200 m2 of area (~82) and the number of eggs per nest (750-1000 eggs) were increased considerably when the normal conditions were restored in April 2005. The absence of spawning migration, from December 2004 to March 2005, is totally an unusual behaviour and this happened for the first time during the past several years of the study period.
This study aimed to detect the presence of enterococci in the root canals of untreated and treated teeth with periapical disease and to compare this to their presence in the saliva and in the immediate surgical environment during root canal treatment. Using an aseptic technique, 33 samples were obtained from 27 untreated and 6 previously treated teeth associated with apical periodontitis. Reduced Transport Fluid (RTF) was used as transport medium. Saliva samples and areas in the surgical environment were also sampled. These were performed prior to chemo-mechanical debrjdement and obturation for every case. The saliva was diluted to 10- J and was plated on Bile Aesculin Azide (BEA) agar whereas the rest of the samples were plated on Bile Aesculin (BE) agar. These plates were then incubated aerobically at 37°C for 48 hours. All the colony types that blackened the agar were sub-cultured to obtain pure isolates and tested on 6.5% sodium chloride (NaCI). Growth on this medium was Gram stained for further confirmation of cell morphology. Gram positive cocci isolated from previous positive test were identified as enterococci. Enterococci were recovered from untreated cases only; from 2 teeth (in 2 patients) prior to chemo-mechanical debridement, from 3 teeth (in 3 patients) prior to obturation and I from saliva sample. A 'total of 5 samples from 5 different patients were positive for enteroco•cci. Sampling in the immediate surgical environment revealed a low occurence in the range of3.0% (1/33) to 15_2% (5/33). In conclusion, the occurence of enterococci in patients and the immediate surgical environment was low number.
Natural radionuclides such as 210 Po and 210 Pb were analyzed in soft part of cockle (Anadara granosa) obtained from Kuala Selangor in the west coast Peninsular of Malaysia. The activity levels of both nuclides fluctuated within the size of cockles from 41.3 ± 2.5 Bq/kg to 114 ± 7 Bq/kg and 12.9 ± 1.7 Bq/kg to 96.8 ± 5.3 Bq/kg in dry weight (dwt) for 210 Po and 210 Pb, respectively. The level activity in wet weight (wwt) also varied from 8.60 ± 0.52 Bq/kg to 25.70 ± 1.63 Bq/kg and 2.47 ± 0.40 Bq/kg to 19.27 ± 1.05 Bq/kg for 210 Po and 210 Pb, respectively, probably related to the different of metabolic rate and growth of cockles. Activity ratio of 210 Po/ 210 Pb in dry weight also fluctuated from 0.93 to 6.41 with not related to the decay of 210 Pb.
Amitraz poisoning is rare and there has been no reported cases in the Malaysian literature. Ingestion of this compound carries many life threatening side effects. We describe a case of Amitraz poisoning in an 18 years old young adult. He developed hypotension, required ventilatory support and a day of intensive care unit stay. He had a quick recovery after he was treated symptomatically and was discharged well after 3 days.
Chlorella is one of the common microalgae found in a wide range of habitats, including Antarctica. Chlorella UMACC 234 is an interesting isolate in the collection of Antarctic microalgae in the University of Malaya algae culture collection (UMACC) as it grows well at temperatures much higher than the ambience. The alga was isolated from snow samples collected from Casey, Antarctica. This study investigates the influence of nitrogen source on the growth, biochemical composition and fatty acid profile of Chlorella UMACC 234. The cultures were grown in Bold’s Basal Medium with 3.0 mM NaNO3, NH4Cl or urea. The cultures grown on NaNO3 attained the highest specific growth rate (μ = 0.43 day–1) while the specific growth rates of those grown on NH4Cl and urea were not significantly different (p > 0.05). The urea-grown cells produced the highest amounts of lipids (25.7% dry weight) and proteins (52.5% dry weight) compared to those grown on other nitrogen sources. The cell numbers attained by the cultures grown at NaNO3 levels between 0.3 and 3.0 mM were similar but decreased markedly at 9.0 mM NaNO3. The fatty acids of Chlorella UMACC 234 were dominated by saturated fatty acids, especially 16:0 and 18:0. The percentage of polyunsaturated fatty acids was very low, especially in cells grown on urea (0.9% total fatty acids). Characterisation of the growth and biochemical composition of this Antarctic Chlorella is important to our studies on the relationship of Chorella isolates from tropical, temperate and polar regions, especially in terms of phylogeny and stress adaptation.
Salmonella has caused foodborne illnesses globally and it has been a rising threat on fresh produce. The objective of this study was to determine the prevalence and concentration of Salmonella spp., Salmonella Typhi and Salmonella Typhimurium in freshly prepared fruit juice sold at hawker stalls. Analysis was conducted by employing most probable number-polymerase chain reaction (MPN-PCR). A total of 50 freshly prepared fruit juices were examined and the prevalence of Salmonella spp., Salmonella Typhi and Salmonella Typhimurium in the fruit juices were 34%, 20% and 10%, respectively, with an estimated microbial load varying from 0 to 42 MPN/g. Of the five different fruits, carrot juice had the highest prevalence of Salmonella spp. (60%) and Salmonella Typhi (40%). However, Salmonella Typhimurium was detected in apple (30%), orange (10%) and starfruit juice (10%). Factors contributing to the presence of Salmonella were cross-contamination and poor sanitation practice. Besides, negligence on temperature and storage time also led to the growth of Salmonella. Proper monitoring and risk assessment are needed in order to establish control measures to ensure the quality and safety of fruit juices in Malaysia.
Tropical greenhouses require active evaporative cooling system such as pad-and-fan to ensure a suitable microclimate for crop production. Excess heat causes indoor temperature to become hotter than desired resulting in detrimental effects to crop growth and production. Solar radiation intensity and outside temperature affect temperature and relative humidity level inside a greenhouse, while wide gradients in temperature and relative humidity can cause problems related to crop growth and production uniformity. A 300 m2 greenhouse, equipped with evaporative pad and four exhaust fans at each end walls, was used in the study. Horizontal and vertical profiles of the temperature and relative humidity inside the greenhouse were investigated. Results showed that temperature increased from evaporative pad area to exhaust fans area in a horizontal plane, while relative humidity showed an inverse pattern from temperature. In the vertical plane, temperature increased, while relative humidity decreased from lower level to the upper level. ANOVA results showed that in overall, temperature and relative humidity inside the greenhouse were uniform as there was no significant difference at 95% confidence interval. Thus, it was concluded that greenhouse cooling system by evaporative pad and exhaust fans are suitable for application in a tropical country such as Malaysia.
Lead-free solder paste printing processes account for the majority of assembly defects in the electronic manufacturing industry. In the stencil printing process, the solder paste must be able to withstand low and high shear rates which result in continuous structural breakdown and build-up. This study investigated the effect of the addition of nickel and platinum powders to the thixotropic behaviour of lead-free Sn/Ag/Cu solder pastes using the structural kinetic model. A hysteresis loop test and constant shear test were utilized to investigate the thixotropic behaviour of the pastes using parallel plate rheometry at 25ºC. In this study, the shear rates were increased from 0.01 s–1 to 10 s–1 and the second curve was a result of decreasing the shear rate from 10 s–1 to 0.01 s–1. For the constant shear test, the samples were subjected to five different shear rates of 0.01s–1, 0.1s–1, 1s–1, 10s–1 and 100s–1. The constant shear rate test was designed to study the structural breakdown and build-up of the paste materials. From this investigation, the hysteresis loop test was shown to be an effective test method to differentiate the extent of structural recovery in the solder pastes. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux that prohibited paste flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitated the flow of pastes, thus viscosity was reduced at high shear rate.
Pathogenic Vibrio parahaemolyticus is one of the leading causes of bacterial gastroenteritis in many countries. Among the strains examined, 36 RAPD-types were found when amplified with primers OPA8 and OPA10. The analysis shows the majority of V. parahaemolyticus isolates originated from seafood were branched into four major clusters at 18.2%, 20.7% 34% and 3.4% similarity levels. This suggests that there is potential for a single strain to be distributed widely within a population and there also potential for multiple contaminating strains of different clonal lineages to be present within the same population. Optimum temperature (37ºC) was the highest and stable formation of biofilm. The total percentage of biofilm formation at 37ºC was 33.33% for each of weak, moderate and strong biofilm producers. Room temperature produces 61.1% of weak biofilm producer, while 13. 89% for moderate biofilm producers and produce 25% of strong biofilm. While a total of 91.67% weak biofilm producers at 4ºC and 8:33% for room temperature and no growth of strong biofilm. Upon analysis, strong biofilm was tracked from the largest group at 37°C and room temperature which produce 27.27% of strong biofilm producer respectively. Interestingly, they are derived from cockles.
Raw goat milk is recognized as one kind of nutritious food owed to its originality and
medicinal values. This study aimed to evaluate the physico-chemical and microbiological
qualities of locally produced raw goat milk prior any processing steps during storage. Milk
samples passed organoleptic test and C.O.B. test were mostly (88.89 %) failed in alcohol test.
AOAC Official method of oven drying method, Kjeldahl method and Soxhlet method were
performed in physico-chemical analysis where results obtained were partially in lined with
reported literature due to subjective factors of breeds, geographical areas and feeds. The locally
produced raw goat milk’s compositions are high in water content and low in fat percentage.
Initial total plate count, coliform count and proteolytic count tested were 3.44 log cfu/ml, 1.87
log cfu/ml and 1.97 log cfu/ml, respectively. Storage time showed significant effect on the
bacterial counts (p>0.05) of milk samples. Shelf-life of milk samples were kept up to 12 hours
under ambient temperature (3.95 log cfu/ml) had not exceeded the standard limit. The shelflife
of the milk samples were extended up to 16 days storage under refrigerated temperature
of 4°C. The microbiological quality of the milk samples showed a significant bacteriological
growth upon prolonged storage and high initial coliform count indicates possible poor hygienic
practices at farm level.
Introduction: Amniotic fluid (AF) consists of heterogenous population of cells with high diagnostic
and therapeutic values. The study of rat amniotic fluid cells is very limited, despite the extensive use
of this animal model in biomedical research. Primary culture of rat AF cells, especially from full term pregnancies has not been well established. Here we attempt to determine the suitable medium in
culturing rat AF cells that would enhance the cell viability, growth rate and heterogeneity. Methods:
The cell viability, growth rate and heterogeneity of rat AF cells were compared upon culturing the
primary cells in two different media; Amniomax or RPMI. Cell viability study was carried out using
trypan blue staining, while the growth rate was monitored based on the time required to passage the cells (population doubling time in hour). The heterogeneity of cells was examined based on the morphology of the cells. Statistical analysis was performed using t-test. Results: Amniomax was observed to provide a better culture condition in culturing rat AF cells as the cells are more viable, grow faster and more heterogenous as compared to the cells grown in RPMI. Conclusion: Amniomax is a more suitable medium for high quality and viability of full term rat AF cell culture, as compared to RPMI. Thus, warranting propagation of more rat AF cells for biomedical research.
Cronobacter sakazakii is an emerging food borne pathogen which has been associated with outbreaks of a rare form of infant meningitis. Although the origin of the microorganism has not been established, several
infection cases have been associated with the consumption of contaminated powdered infant formula (PIF). In the present study, growth characteristics of three C. sakazakii strains isolated from PIF samples and C.
muytjensii strain ATCC 51329, which was formerly the ATCC Preceptrol™ strain for the quality control of
‘Enterobacter sakazakii’ prior to the taxonomic revision, were investigated in Tryptone Soya broth (TSB) and
reconstituted PIF at 4, 10, 25, 37, 45 and 50ºC. The viability of heat treated cells of Cronobacter strains was
evaluated by plating on Violet Red Bile Glucose agar (VRBGA) and the Druggan-Forsythe-Iversen (DFI)
chromogenic agar followed by incubation at 37ºC. These strains were also subjected to higher temperatures
between 52 to 60ºC to measure their thermal tolerance. The mean generation time of all Cronobacter strains
were slightly lower in PIF than in TSB. C. muytjensii ATCC 51329 showed lower generation time in all culture
media and all temperatures compared to the Cronobacter food isolates, but the results were not significantly
different (P>0.05). The results also indicated that combination of PIF: DFI culture media had higher recovery at
all temperatures compared to other combinations. Survival study also indicated that C. muytjensii ATCC 51329
had higher D-value compared to food isolates at all incubation temperatures.
Introduction: Presently, the use of Eurycoma longifolia Jack (ELJ) (Tongkat Ali) has increased dramatically in Southeast Asia especially Malaysia where it is widely used as aphrodisiac and anti-malarial agent. Interestingly, its consumption has become popular in daily life as beverage to enhance energy and stamina especially among males. However, its effect on the safety of vital organs of the body has not been studied adequately. Hence, the main objective of this study was to determine whether or not long-term use of ELJ any has side effects on the liver in rats.
Methods: Three different concentrations of aqueous extract of ELJ were prepared and dissolved in distilled water. A total of 32 Sprague-Dawley male rats were used and randomly divided into three test groups and control. The test groups were given different doses (low dose 250 mg/kg bw, medium dose 500mg/kg bw and high dose 1000 mg/kg bw) of aqueous extract of ELJ, respectively. Control group was given distilled water alone. Doses were given orally and daily for 5 weeks. After 5 weeks, animals were sacrificed; whole liver tissues were obtained, fixed in 10 percent formaldehyde overnight for histological examination.
Result: Histological observations showed mild to moderate degrees of hemorrhage, hepatocytes degeneration and severe fatty changes in liver tissue of the test groups treated with ELJ as compared to control.
Conclusion: In conclusion, the long-term daily consumption of ELJ in large quantity as beverage may cause fatty changes, hemorrhage and hepatocytes degeneration in the liver tissue.
Heuristic Evaluation (HE) is used as a basis in developing a new technique to evaluate usability or
educational computer games known as Playability Heuristic Evaluation for Educational Computer Game (PHEG). PHEG was developed to identify usability problems that accommodate five heuristics, namely, interface, educational elements, content, playability and multimedia. In HE process, usability problems are rated based on severity score and this is followed by presentation of a mean value. The mean value is used to determine the level of usability problems; however, in some cases, this value may not accurate because it will ignore the most critical problems found in a specific part. In developing PHEG, a new quantitative approach was proposed in analyzing usability problems data. Numbers of sub-heuristics for each heuristic involved were taken into account in calculating percentage for each heuristic. Functions to calculate critical problems were also introduced. Evaluation for one educational game that was still in development process was conducted and the results showed that most of the critical problems were found in educational elements and content heuristics (57.14%), while the least usability problems were found in playability heuristic. In particular, the mean value in this analysis can be used as an indicator in identifying critical problems for educational computer games.
The in vitro cytotoxic potential of locally produced dental porcelain was evaluated in this study. The cellular response of human osteoblast and fibroblast cell lines were assessed using MTT assay by incubating with the fluid extract of dental porcelain powder and dental porcelain discs (direct test). Aging process was carried out by submerging the discs into 3% bovine serum albumin (BSA) solution. Tests on extracts showed that dental porcelain was significantly different from the control at a concentration of 250 mg/ml. Direct test showed that dental porcelain after aging was not significantly different from the control with a mean (SD) of 89.2 (13.4)%, whereas, it was significantly different from the control before conditioning of BSA with a mean (SD) of 88.5 (12.1)%. However, the dental porcelain caused mild suppression of succinate dehydrogenase activity (
Mental health is a growing concern in the field of occupational health globally due to its social, health, and economic implications on the individual and the community at large. As universities in Malaysia are advancing towards becoming world-class research universities, academicians are now faced with more pressures, making them more vulnerable to burnout. A cross sectional study was conducted among 194 randomly sampled academicians from a faculty of a public university. Data was collected using a self-administered questionnaire to assess the sociodemographic characteristics, occupational characteristics and burnout. Analysis was done using SPSS version 21. The response rate was 87.1%. The overall prevalence of burnout was 10.7% with significant associations between gender (χ2 = 4.61; p = 0.03), teaching experience (χ2 = 0.83; p = 0.02), job satisfaction (χ2 = 11.33; p = 0.001). Female academicians have a higher prevalence of burnout (14.3%). Academicians who have fewer years of teaching experience (