Displaying publications 1 - 20 of 25 in total

Abstract:
Sort:
  1. Anwar A, Masri A, Rao K, Rajendran K, Khan NA, Shah MR, et al.
    Sci Rep, 2019 02 28;9(1):3122.
    PMID: 30816269 DOI: 10.1038/s41598-019-39528-0
    Herein, we report green synthesized nanoparticles based on stabilization by plant gums, loaded with citrus fruits flavonoids Hesperidin (HDN) and Naringin (NRG) as novel antimicrobial agents against brain-eating amoebae and multi-drug resistant bacteria. Nanoparticles were thoroughly characterized by using zetasizer, zeta potential, atomic force microscopy, ultravoilet-visible and Fourier transform-infrared spectroscopic techniques. The size of these spherical nanoparticles was found to be in the range of 100-225 nm. The antiamoebic effects of these green synthesized Silver and Gold nanoparticles loaded with HDN and NRG were tested against Acanthamoeba castellanii and Naegleria fowleri, while antibacterial effects were evaluated against methicillin-resistant Staphylococcus aureus (MRSA) and neuropathogenic Escherichia coli K1. Amoebicidal assays revealed that HDN loaded Silver nanoparticles stabilized by gum acacia (GA-AgNPs-HDN) quantitatively abolished amoeba viability by 100%, while NRG loaded Gold nanoparticles stabilized by gum tragacanth (GT-AuNPs-NRG) significantly reduced the viability of A. castellanii and N. fowleri at 50 µg per mL. Furthermore, these nanoparticles inhibited the encystation and excystation by more than 85%, as well as GA-AgNPs-HDN only completely obliterated amoeba-mediated host cells cytopathogenicity. Whereas, GA-AgNPs-HDN exhibited significant bactericidal effects against MRSA and E. coli K1 and reduced bacterial-mediated host cells cytotoxicity. Notably, when tested against human cells, these nanoparticles showed minimal (23%) cytotoxicity at even higher concentration of 100 µg per mL as compared to 50 µg per mL used for antimicrobial assays. Hence, these novel nanoparticles formulations hold potential as therapeutic agents against infections caused by brain-eating amoebae, as well as multi-drug resistant bacteria, and recommend a step forward in drug development.
    Matched MeSH terms: Plant Gums/chemistry*
  2. Salim N, Basri M, Rahman MB, Abdullah DK, Basri H
    Int J Nanomedicine, 2012;7:4739-47.
    PMID: 22973096 DOI: 10.2147/IJN.S34700
    During recent years, there has been growing interest in the use of nanoemulsion as a drug-carrier system for topical delivery. A nanoemulsion is a transparent mixture of oil, surfactant and water with a very low viscosity, usually the product of its high water content. The present study investigated the modification of nanoemulsions with different hydrocolloid gums, to enhanced drug delivery of ibuprofen. The in vitro characterization of the initial and modified nanoemulsions was also studied.
    Matched MeSH terms: Plant Gums/chemistry*
  3. Khan MUA, Raza MA, Razak SIA, Abdul Kadir MR, Haider A, Shah SA, et al.
    J Tissue Eng Regen Med, 2020 10;14(10):1488-1501.
    PMID: 32761978 DOI: 10.1002/term.3115
    It is a challenging task to develop active biomacromolecular wound dressing materials that are biocompatible and possesses antibacterial properties against the bacterial strains that cause severe skin disease. This work is focused on the preparation of a biocompatible and degradable hydrogel for wound dressing application using arabinoxylan (ARX) and guar gum (GG) natural polymers. Fourier transform infrared spectroscopy (FT-IR) confirmed that both ARX and GG interacted well with each other, and their interactions further increased with the addition of crosslinker tetraethyl orthosilicate. Scanning electron microscope (SEM) micrographs showed uniform porous morphologies of the hydrogels. The porous morphologies and uniform interconnected pores are attributed to the increased crosslinking of the hydrogel. Elastic modulus, tensile strength, and fracture strain of the hydrogels significantly improved (from ATG-1 to ATG-4) with crosslinking. Degradability tests showed that hydrogels lost maximum weight in 7 days. All the samples showed variation in swelling with pH. Maximum swelling was observed at pH 7. The hydrogel samples showed good antibacterial activity against Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive) in PBS, good drug release profile (92% drug release), and nontoxic cellular behavior. The cells not only retained their cylindrical morphologies onto the hydrogel but were also performing their normal activities. It is, therefore, believed that as-developed hydrogel could be a potential material for wound dressing application.
    Matched MeSH terms: Plant Gums/pharmacology*; Plant Gums/chemistry
  4. Zaharuddin ND, Noordin MI, Kadivar A
    Biomed Res Int, 2014;2014:735891.
    PMID: 24678512 DOI: 10.1155/2014/735891
    The effectiveness of Okra gum in sustaining the release of propranolol hydrochloride in a tablet was studied. Okra gum was extracted from the pods of Hibiscus esculentus using acetone as a drying agent. Dried Okra gum was made into powder form and its physical and chemical characteristics such as solubility, pH, moisture content, viscosity, morphology study using SEM, infrared study using FTIR, crystallinity study using XRD, and thermal study using DSC and TGA were carried out. The powder was used in the preparation of tablet using granulation and compression methods. Propranolol hydrochloride was used as a model drug and the activity of Okra gum as a binder was compared by preparing tablets using a synthetic and a semisynthetic binder which are hydroxylmethylpropyl cellulose (HPMC) and sodium alginate, respectively. Evaluation of drug release kinetics that was attained from dissolution studies showed that Okra gum retarded the release up to 24 hours and exhibited the longest release as compared to HPMC and sodium alginate. The tensile and crushing strength of tablets was also evaluated by conducting hardness and friability tests. Okra gum was observed to produce tablets with the highest hardness value and lowest friability. Hence, Okra gum was testified as an effective adjuvant to produce favourable sustained release tablets with strong tensile and crushing strength.
    Matched MeSH terms: Plant Gums/chemistry*
  5. Karan S, Choudhury H, Chakra BK, Chatterjee TK
    Asian Pac J Cancer Prev, 2019 07 01;20(7):2181-2194.
    PMID: 31350983 DOI: 10.31557/APJCP.2019.20.7.2181
    Controlled release delivery system of chemotherapeutic agents at the site of colon endorses modern drug-entrapped
    delivery tools, which release the entrappedagents at a controlled rate for anextended period providing patient compliance
    and additional protection from the degradinggastric environment. Thus, the present study was aimed to develop
    and optimize a novel polymeric microsphere of 5-fluorouracil (5-FU) using natural gum katira to obtain an optimal
    therapeutic response at the colon. Due course of experimentation, in-vivo safety profile of the gum katira in an animal
    model was established. Modified solvent extraction/evaporation technique wasemployed to encapsulate 5-FU in the
    natural polymeric microsphere and was characterized using in-vitro studies to investigate particle size, morphology,
    encapsulation efficiency and release of the drug from developed formulation. Formulated and optimized polymeric
    microsphere of 5-FU using gum katira polymer own optimal physicochemical characteristics with a fine spherical particle
    with size ranged from 210.37±7.50 to 314.45±7.80 μm.Targeted microsphere exhibited good cytotoxicity and also has
    high drug entrapment efficiency, and satisfactory release pattern of the drug within a time frame of 12 h. Finally, we
    foresee that the optimized polymeric gum katiramicrosphere of 5-FU could be a promising micro-carrier for efficient
    colon drug targeting delivery tool with improved chemotherapeutic efficacy against colon cancer.
    Matched MeSH terms: Plant Gums/chemistry*
  6. Khan MUA, Iqbal I, Ansari MNM, Razak SIA, Raza MA, Sajjad A, et al.
    Molecules, 2021 Sep 30;26(19).
    PMID: 34641480 DOI: 10.3390/molecules26195937
    The present research is based on the fabrication preparation of CS/PVA/GG blended hydrogel with nontoxic tetra orthosilicate (TEOS) for sustained paracetamol release. Different TEOS percentages were used because of their nontoxic behavior to study newly designed hydrogels' crosslinking and physicochemical properties. These hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and wetting to determine the functional, surface morphology, hydrophilic, or hydrophobic properties. The swelling analysis in different media, degradation in PBS, and drug release kinetics were conducted to observe their response against corresponding media. The FTIR analysis confirmed the components added and crosslinking between them, and surface morphology confirmed different surface and wetting behavior due to different crosslinking. In various solvents, including water, buffer, and electrolyte solutions, the swelling behaviour of hydrogel was investigated and observed that TEOS amount caused less hydrogel swelling. In acidic pH, hydrogels swell the most, while they swell the least at pH 7 or higher. These hydrogels are pH-sensitive and appropriate for controlled drug release. These hydrogels demonstrated that, as the ionic concentration was increased, swelling decreased due to decreased osmotic pressure in various electrolyte solutions. The antimicrobial analysis revealed that these hydrogels are highly antibacterial against Gram-positive (Staphylococcus aureus and Bacillus cereus) and Gram negative (Pseudomonas aeruginosa and Escherichia coli) bacterial strains. The drug release mechanism was 98% in phosphate buffer saline (PBS) media at pH 7.4 in 140 min. To analyze drug release behaviour, the drug release kinetics was assessed against different mathematical models (such as zero and first order, Higuchi, Baker-Lonsdale, Hixson, and Peppas). It was found that hydrogel (CPG2) follows the Peppas model with the highest value of regression (R2 = 0.98509). Hence, from the results, these hydrogels could be a potential biomaterial for wound dressing in biomedical applications.
    Matched MeSH terms: Plant Gums/chemistry*
  7. Malviya R, Raj S, Fuloria S, Subramaniyan V, Sathasivam K, Kumari U, et al.
    Int J Nanomedicine, 2021;16:2533-2553.
    PMID: 33824590 DOI: 10.2147/IJN.S300991
    PURPOSE: The present study was intended to fabricate chitosan (Ch)-tamarind gum polysaccharide (TGP) polyelectrolyte complex stabilized cubic nanoparticles of simvastatin and evaluate their potential against human breast cancer cell lines.

    MATERIALS AND METHODS: The antisolvent precipitation method was used for formulation of nanoparticles. Factorial design (32) was utilized as a tool to analyze the effect of Ch and TGP concentration on particle size and entrapment efficiency of nanoparticles.

    RESULTS: Formulated nanoparticles showed high entrapment efficiency (67.19±0.42-83.36±0.23%) and small size (53.3-383.1 nm). The present investigation involved utilization of two biological membranes (egg and tomato) as biological barriers for drug release. The study revealed that drug release from tomato membranes was retarded (as compared to egg membranes) but the release pattern matched that of egg membranes. All formulations followed the Baker-Lansdale model of drug release irrespective of the two different biological barriers. Stability studies were carried out for 45 days and exhibited less variation in particle size as well as a reduction in entrapment efficiency. Simvastatin loaded PEC stabilized nanoparticles exhibited better control on growth of human breast cancer cell lines than simple simvastatin. An unusual anticancer effect of simvastatin nanoparticles is also supported by several other research studies.

    CONCLUSION: The present study involves first-time synthesis of Ch-TGP polyelectrolyte complex stabilized nanoparticles of simvastatin against MCF-7 cells. It recommends that, in future, theoretical modeling and IVIVC should be carried out for perfect designing of delivery systems.

    Matched MeSH terms: Plant Gums/chemistry*
  8. Khalid BA, Lee LF, Samad AH, Ng ML
    Asia Pac J Clin Nutr, 1996 Dec;5(4):239-43.
    PMID: 24394617
    The aims of the project were to determine the glycaemic and insulin responses of non-insulin dependent diabetic patients (NIDDM) to 3 traditional Malaysian meals compared to oral glucose, and to determine whether guar gum would affect these responses. Patients with NIDDM were tested with 75 g oral glucose and three common breakfast meals of the three main ethnic groups of Malaysia. When compared with the oral glucose group, significantly by lower blood glucose responses were seen at 90 and 120 minutes post prandial for nasi lemak (p<0.05) and at 60, 75 and 90 minutes for mee sup (p<0.05). No significant difference was seen for roti telur. There was no significant difference in plasma glucose at any time point of the study when the three test meals were compared with each other. Addition of 5g granulated guar gum mixed with water taken prior to the glucose significantly lowered the plasma glucose at 60, 120 and 150 minutes postprandially (p<0.05). Similarly for the test meals, guar gum significantly lowered plasma glucose concentration between 15 and 45 minutes (p<0.03) postprandial for nasi lemak and between 15 and 30 minutes (p<0.03) for mee sup but not with roti telur. With addition of guar gum, there was no significant change of insulin responses with the three meals but a significant increase was seen at 30 minutes (p<0.02) after ingestion of glucose.
    Matched MeSH terms: Plant Gums
  9. Yuan X, Amarnath Praphakar R, Munusamy MA, Alarfaj AA, Suresh Kumar S, Rajan M
    Carbohydr Polym, 2019 Feb 15;206:1-10.
    PMID: 30553301 DOI: 10.1016/j.carbpol.2018.10.098
    Natural polymer guar gum has one of the highest viscosities in water solution and hence, these are significantly used in pharmaceutical applications. Guar gum inter-connected micelles as a new carrier has been developed for poor water soluble rifampicin drug. The hydrogel inter-connected micelle core was formulated as a hydrophilic inner and hydrophobic outer core by using guar gum/chitosan/polycaprolactone and the carrier interaction with rifampicin was confirmed by FT-IR. The morphological observations were carried out through TEM, SEM and AFM analysis. The encapsulation efficiency and in-vitro drug release behavior of prepared hydrogel based micelle system was analyzed by UV-vis spectrometry. The anti-bacterial activity against K. pneumoniae and S. aureus was studied by observing their ruptured surface by SEM. The cytotoxicity study reveals that the pure polymeric system has no toxic effect whereas drug loaded ones showed superior activity against THP-1 cells. From the cell apoptosis analyses, the apoptosis was carried out in a time dependent manner. The cell uptake behavior was also observed in THP-1 cells which indicate that the hydrogel based micelle system is an excellent material for the mucoadhesive on intracellular alveolar macrophage treatment.
    Matched MeSH terms: Plant Gums/chemical synthesis; Plant Gums/toxicity; Plant Gums/chemistry
  10. Rosli D, Shahar S, Manaf ZA, Lau HJ, Yusof NYM, Haron MR, et al.
    JPEN J Parenter Enteral Nutr, 2021 02;45(2):277-286.
    PMID: 32740950 DOI: 10.1002/jpen.1987
    BACKGROUND: Radiation therapy is the treatment of pelvic cancers, with diarrhea often being the most frequent acute side effect. This study aimed to determine the efficacy of partially hydrolyzed guar gum (PHGG) usage in reducing radiotherapy-induced diarrhea and improving bacterial count, nutrition status, and quality of life (QoL) among cancer patients.

    METHODS: Adult patients undergoing pelvic radiation were recruited and randomly assigned to receive supplementation of either 10 g of PHGG or placebo (maltodextrin) twice daily, 14 days prior and 14 days during pelvic radiation. Diarrhea frequency, fecal samples, nutrition status, and QoL were assessed at baseline and days 14, 28 (2 weeks after pelvic radiation), and 45 (at the completion of pelvic radiation, 2 weeks' postsupplementation).

    RESULTS: A total of 30 patients (mean age 56.5 ± 10.8 years, 75% malnourished) participated. The mean of diarrhea frequency in the intervention group (IG) was higher compared with the control group (CG) from days 14 and 28 but reduced at day 45. There was a significant intervention effect after controlling for confounders (ie, baseline diarrhea, age, nutrition status) (P < .05). Bifidobacterium count increased by double among the IG at 14 days of PHGG supplementation, whereas such trend was not observed in the CG.

    CONCLUSION: Supplementation of PHGG potentially increased the bifidobacterial count and seemed to have post-supplementation effects by reducing the frequency of diarrhea upon the completion of pelvic radiation treatment.

    Matched MeSH terms: Plant Gums
  11. Halim, N.R.A., Shukri, W.H.Z., Lani, M.N., Sarbon, N.M.
    MyJurnal
    The aim of this work is to study the effect of hydrocolloids; guar gum (GG), xanthan gum (XG) and carboxymethyl cellulose (CMC) on the physicochemical properties, microbiological quality and sensory properties in order to investigate the potential of applying fermented cassava (tapai ubi) in ice cream. Fermented cassava ice cream (FCI) incorporated with the three types of hydrocolloid was prepared and the protein content, pH value, overrun, colour, hardness, microstructure, FTIR spectrum and sensory acceptance of all samples were determined. Fermented cassava ice cream incorporated with XG showed the highest protein content (14.88%), pH value (pH 6.07), and overrun value (4.27%) as compared to the fermented cassava ice cream incorporated with GG and CMC. Meanwhile, ice cream incorporated with GG possessed the highest L* (94.43) and hardness (3693.15 g) value as compared to XG and CMC. The microstructure study showed that the difference in uniformity at the interface obtained with different types of the hydrocolloids added demonstrated the effect of fat absorption at the air interfaces. The FTIR spectrum investigated indicated that the addition of the fermented cassava to FCI had increased the OH group in the ice cream as compared to the control. All samples were microbial safe as the total plate counts in all samples were below the standard as prescribed in Food Act 1983 with no presence of E. coli . In conclusion, fermented cassava ice cream with XG showed the good quality in terms of its pH value, overrun, total plate count and overall acceptability.
    Matched MeSH terms: Plant Gums
  12. Balachandramohan J, Sivasankar T, Sivakumar M
    J Hazard Mater, 2020 03 05;385:121621.
    PMID: 31784127 DOI: 10.1016/j.jhazmat.2019.121621
    Silver Oxide (Ag2O)-Guar gum nanocomposite was fabricated via a simple sonochemical co-precipitation method. The obtained photocatalyst was characterized with various techniques such as X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, scanning electron microscopy and transmission electron microscopy along with energy dispersion X-ray spectroscopy. The findings have demonstrated that Ag2O nanoparticles are spherical of 5-20 nm and were dispersed on the surface of polysaccharide guar gum to form Ag2O-guar gum nanocomposite. The as-synthesized nanocomposite was enacted as a competent photocatalyst for the reduction of nitrobenzene and oxidation of benzyl alchohol. The conversion efficiency for the reduction of nitrobenzene was 96 % with the addition of sodium borohydride, and the conversion of benzyl alcohol was 98 %. The highly efficient photocatalytic activity was due to the exceedingly dispersed Ag2O-guar gum nanocomposite where effective separation rate of energy driven electron-hole pairs and stronger light absorption occurs. The possible mechanism of the reactions was implicated in understanding the active species involved in the photocatalytic study.
    Matched MeSH terms: Plant Gums
  13. Asif M, Yehya AHS, Dahham SS, Mohamed SK, Shafaei A, Ezzat MO, et al.
    Biomed Pharmacother, 2019 Jan;109:1620-1629.
    PMID: 30551416 DOI: 10.1016/j.biopha.2018.10.127
    Proven the great potential of essential oils as anticancer agents, the current study intended to explore molecular mechanisms responsible for in vitro and in vivo anti-colon cancer efficacy of essential oil containing oleo-gum resin extract (RH) of Mesua ferrea. MTT cell viability studies showed that RH had broad spectrum cytotoxic activities. However, it induced more profound growth inhibitory effects towards two human colon cancer cell lines i.e., HCT 116 and LIM1215 with an IC50 values of 17.38 ± 0.92 and 18.86 ± 0.80 μg/mL respectively. RH induced relatively less toxicity in normal human colon fibroblasts i.e., CCD-18co. Cell death studies conducted, revealed that RH induced characteristic morphological and biochemical changes in HCT 116. At protein level it down-regulated expression of multiple pro-survival proteins i.e., survivin, xIAP, HSP27, HSP60 and HSP70 and up-regulated expression of ROS, caspase-3/7 and TRAIL-R2 in HCT 116. Furthermore, significant reduction in invasion, migration and colony formation potential was observed in HCT 116 treated with RH. Chemical characterization by GC-MS and HPLC methods revealed isoledene and elemene as one the major compounds. RH showed potent antitumor activity in xenograft model. Overall, these findings suggest that RH holds a promise to be further studied for cheap anti-colon cancer naturaceutical development.
    Matched MeSH terms: Plant Gums/isolation & purification; Plant Gums/therapeutic use*
  14. Kee YL, Mukherjee S, Pariatamby A
    Chemosphere, 2015 Oct;136:111-7.
    PMID: 25966329 DOI: 10.1016/j.chemosphere.2015.04.074
    This study was carried out to evaluate the efficiency of Guar gum in removing Persistent Organic Pollutants (POPs), viz. phenol,2,4-bis(1,1-dimethylethyl) and bis(2-ethylhexyl) phthalate (DEHP), from farm effluent. The removal efficiency was compared with alum. The results indicated that 4.0 mg L(-1) of Guar gum at pH 7 could remove 99.70% and 99.99% of phenol,2,4-bis(1,1-dimethylethyl) and DEHP, respectively. Box Behnken design was used for optimization of the operating parameters for optimal POPs removal. Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FTIR) spectroscopy studies were conducted on the flocs. SEM micrographs showed numerous void spaces in the flocs produced by Guar gum as opposed to those produced by alum. This indicated why Guar gum was more effective in capturing and removal of suspended particles and POPs as compared to alum. FTIR spectra indicated a shift in the bonding of functional groups in the flocs produced by Guar gum as compared to raw Guar gum powder signifying chemical attachment of the organics present in the effluent to the coagulant resulting in their removal. Guar gum is highly recommended as a substitute to chemical coagulant in treating POPs due to its non-toxic and biodegradable characteristics.
    Matched MeSH terms: Plant Gums/chemistry*
  15. Ababneh B, Tajuddin AA, Hashim R, Shuaib IL
    Australas Phys Eng Sci Med, 2016 Dec;39(4):871-876.
    PMID: 27628943 DOI: 10.1007/s13246-016-0482-6
    This paper reports the novel use of almond gum as a binder in manufacturing Rhizophora spp. particleboard. X-ray fluorescence spectroscopy was employed for analysis under photon energy range of 16.6-25.3 keV. Results showed that almond gum-bonded Rhizophora spp. particleboard can be used as tissue-equivalent phantom in diagnostic radiation. The calculated mass attenuation coefficients of the particleboards were consistent with the values of water calculated using XCOM program for the same photon energies, with p values of 0.056, 0.069, and 0.077 for samples A8, C0, and C8, respectively. However, no direct relationship was found between the percentage of adhesive and the mass attenuation coefficient. The results positively supported the use of almond gum as a binding agent in the fabrication of particleboards, which can be used as a phantom material in dosimetric and quality control applications.
    Matched MeSH terms: Plant Gums/chemistry*
  16. Samrot AV, Kudaiyappan T, Bisyarah U, Mirarmandi A, Faradjeva E, Abubakar A, et al.
    Int J Nanomedicine, 2020;15:7097-7115.
    PMID: 33061370 DOI: 10.2147/IJN.S259653
    Background: Plant gums consist of polysaccharides which can be used in the preparation of nanocarriers and provide a wide application in pharmaceutical applications including as drug delivery agents and the matrices for drug release. The objectives of the study were to collect plant gums from Araucaria heterophylla L and Prosopis chilensis L and to extract and characterize their polysaccharides. Then to utilize these plant gum-derived polysaccharides for the formulation of nanocarriers to use for drug loading and to examine their purpose in drug delivery in vitro.

    Methods: Plant gum was collected, polysaccharide was extracted, purified, characterized using UV-Vis, FTIR, TGA and GCMS and subjected to various bioactive studies. The purified polysaccharide was used for making curcumin-loaded nanocarriers using STMP (sodium trimetaphosphate). Bioactivities were performed on the crude, purified and drug-loaded nanocarriers. These polysaccharide-based nanocarriers were characterized using UV-Vis spectrophotometer, FTIR, SEM, and AFM. Drug release kinetics were performed for the drug-loaded nanocarriers.

    Results: The presence of glucose, xylose and sucrose was studied from the UV-Vis and GCMS analysis. Purified polysaccharides of both the plants showed antioxidant activity and also antibacterial activity against Bacillus sp. Purified polysaccharides were used for nanocarrier synthesis, where the size and shape of the nanocarriers were studied using SEM analysis and AFM analysis. The size of the drug-loaded nanocarriers was found to be around 200 nm. The curcumin-loaded nanocarriers were releasing curcumin slow and steady.

    Conclusion: The extracted pure polysaccharide of A. heterophylla and P. chilensis acted as good antioxidants and showed antibacterial activity against Bacillus sp. These polysaccharides were fabricated into curcumin-loaded nanocarriers whose size was below 200 nm. Both the drug-loaded nanocarriers synthesized using A. heterophylla and P. chilensis showed antibacterial activity with a steady drug release profile. Hence, these natural exudates can serve as biodegradable nanocarriers in drug delivery.

    Matched MeSH terms: Plant Gums/isolation & purification*; Plant Gums/pharmacology; Plant Gums/chemistry
  17. Shukri, W.H.Z., Hamzah, E.N.H., Halim, N.R.A., Isa, M.I.N., Sarbon, N.M.
    MyJurnal
    The aim of this work is to study the effect of hydrocolloids (guar gum, xanthan gum and carboxymethyl cellulose (CMC) on the physical properties and sensory evaluation of ice cream produced in order to investigate the potential of applying fermented glutinous rice (tapai pulut) as a value-added ingredient. The addition of 25% fermented glutinous rice was the most reliable amount to enhance the physical and sensory properties of ice cream when incorporating hydrocolloids. The addition of hydrocolloids significantly (p < 0.05) increased the pH, firmness, overrun, and melting rate of fermented glutinous rice ice cream. The addition of guar gum scored the highest firmness value (5403 g) followed by CMC (4630 g) and xanthan gum (3481g). Fermented glutinous rice ice cream with xanthan gum added, induced a noticeable change in overrun value (62%) while the addition of CMC decreased the melting rate compared to the control. The FTIR spectrum of fermented glutinous rice ice cream with different hydrocolloids containing carboxyl, amide and carbonyl group was appeared at 3362-3379 cm-1 , 1639-1640 cm-1 and 1026-1064 cm-1, respectively. In conclusion, the addition of xanthan gum presented great potential to improve the quality of fermented glutinous rice ice cream produced in terms of its firmness, overrun and melting rate.
    Matched MeSH terms: Plant Gums
  18. Amir, I.Z., Sharon, W.X.R., Syafiq, A.
    MyJurnal
    Impacts and relationships on physicochemical properties in dark chocolate produced from different substitution for cocoa butter by Xanthan gum (XG) and Guar gum (GG) blends were determined using D-optimal mixture design. This study involved three levels of substitution which are 5%, 10% and 15% with constrained cocoa butter content and random blend of gums. Linear design models were applied to analyze parameters including texture (hardness) measurement and melting profile of fat crystal. Products experienced undesirable raises of hardness jointly with the increment of gums incorporation across the level of cocoa butter replacement from 5% to 15%. Similar trend was also agreed with the melting behavior of products as their melting point increased with the gradual diminution of cocoa butter. After all, the replacement of cocoa butter using hydrocolloids was deemed possible as there were products whose melting point and hardness fell in the acceptable range.
    Matched MeSH terms: Plant Gums
  19. Ho CY, Majid HA, Jamhuri N, Ahmad AF, Selvarajoo TA
    Nutrition, 2022 06 01;103-104:111758.
    PMID: 35843037 DOI: 10.1016/j.nut.2022.111758
    BACKGROUND: High stoma output is a significant complication after bowel surgery that causes dehydration, resulting in acute kidney injury, electrolyte imbalances, unintentional weight loss, and malnutrition. This study evaluates the postoperative ileostomy output among patients with colorectal cancer after being supplemented with partially hydrolyzed guar gum.

    METHODS: This cross-sectional study collected sociodemographic and clinical characteristics, stoma output, and dietary intake upon discharge, hospitalization, and readmission within 30 d of discharge.

    RESULTS: A total of 29 participants were recruited, with 72.4% having moderate malnutrition risk. Patients who received partially hydrolyzed guar gum (PHGG) fiber reported lower stoma output with firmer output consistency than patients who received standard care (SC) (P < 0.05 and P < 0.01). Patients who received PHGG achieved higher energy, protein, and soluble fiber intake than did the SC group (P < 0.01) upon discharge. There was a significant inverse association between soluble fiber (PHGG fiber + dietary soluble fiber) intake and ileostomy output (r, -0.494; P = 0.006).

    CONCLUSIONS: Partially hydrolyzed guar gum fiber acts as an agent to hold water, reduce the speed of gastrointestinal tract transit, increase effluent viscosity, and potentially decrease water losses. Supplementation with PHGG fiber appeared to minimize ileostomy output and improve clinical outcomes among postoperative ileostomy patients. This needs to be evaluated further with a randomized controlled trial to confirm this preliminary finding.

    Matched MeSH terms: Plant Gums
  20. Bera H, Ippagunta SR, Kumar S, Vangala P
    Mater Sci Eng C Mater Biol Appl, 2017 Jul 01;76:715-726.
    PMID: 28482582 DOI: 10.1016/j.msec.2017.03.074
    Novel alginate-arabic gum (AG) gel membrane coated alginate-ghatti gum (GG) modified montmorillonite (MMT) composite matrices were developed for intragastric flurbiprofen (FLU) delivery by combining floating and mucoadhesion mechanisms. The clay-biopolymer composite matrices containing FLU as core were accomplished by ionic-gelation technique. Effects of polymer-blend (alginate:GG) ratios and crosslinker (CaCl2) concentrations on drug entrapment efficiency (DEE, %) and cumulative drug release after 8h (Q8h, %) were studied to optimize the core matrices by a 32factorial design. The optimized matrices (F-O) demonstrated DEE of 91.69±1.43% and Q8hof 74.96±1.56% with minimum errors in prediction. The alginate-AG gel membrane enveloped optimized matrices (F-O, coated) exhibited superior buoyancy, better ex vivo mucoadhesion and slower drug release rate. The drug release profile of FLU-loaded uncoated and coated optimized matrices was best fitted in Korsmeyer-Peppas model with anomalous diffusion and case-II transport driven mechanism, respectively. The uncoated and coated matrices containing FLU were also characterized for drug-excipients compatibility, drug crystallinity, thermal behaviour and surface morphology. Thus, the newly developed alginate-AG gel membrane coated alginate-GG modified MMT composite matrices are appropriate for intragastric delivery of FLU over an extended period of time with improved therapeutic benefits.
    Matched MeSH terms: Plant Gums
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links