Displaying publications 261 - 280 of 311 in total

Abstract:
Sort:
  1. Fulltext Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering
    Farzadi A, Solati-Hashjin M, Asadi-Eydivand M, Abu Osman NA
    PLoS One, 2014;9(9):e108252.
    PMID: 25233468 DOI: 10.1371/journal.pone.0108252
    Powder-based inkjet 3D printing method is one of the most attractive solid free form techniques. It involves a sequential layering process through which 3D porous scaffolds can be directly produced from computer-generated models. 3D printed products' quality are controlled by the optimal build parameters. In this study, Calcium Sulfate based powders were used for porous scaffolds fabrication. The printed scaffolds of 0.8 mm pore size, with different layer thickness and printing orientation, were subjected to the depowdering step. The effects of four layer thicknesses and printing orientations, (parallel to X, Y and Z), on the physical and mechanical properties of printed scaffolds were investigated. It was observed that the compressive strength, toughness and Young's modulus of samples with 0.1125 and 0.125 mm layer thickness were more than others. Furthermore, the results of SEM and μCT analyses showed that samples with 0.1125 mm layer thickness printed in X direction have more dimensional accuracy and significantly close to CAD software based designs with predefined pore size, porosity and pore interconnectivity.
    Matched MeSH terms: Tissue Engineering
  2. Fulltext Design and development of potential tissue engineering scaffolds from structurally different longitudinal parts of a bovine-femur
    Pramanik S, Pingguan-Murphy B, Cho J, Abu Osman NA
    Sci Rep, 2014 Jul 28;4:5843.
    PMID: 25068570 DOI: 10.1038/srep05843
    The complex architecture of the cortical part of the bovine-femur was examined to develop potential tissue engineering (TE) scaffolds. Weight-change and X-ray diffraction (XRD) results show that significant phase transformation and morphology conversion of the bone occur at 500-750°C and 750-900°C, respectively. Another breakthrough finding was achieved by determining a sintering condition for the nucleation of hydroxyapatite crystal from bovine bone via XRD technique. Scanning electron microscopy results of morphological growth suggests that the concentration of polymer fibrils increases (or decreases, in case of apatite crystals) from the distal to proximal end of the femur. Energy-dispersive analysis of X-ray, Fourier transform infrared, micro-computer tomography, and mechanical studies of the actual composition also strongly support our microscopic results and firmly indicate the functionally graded material properties of bovine-femur. Bones sintered at 900 and 1000°C show potential properties for soft and hard TE applications, respectively.
    Matched MeSH terms: Tissue Engineering
  3. Sourcing different neuro-progenitor cell for the use of nerve construct
    Yazid AG, Anuar A, Onhmar HT, Ng AM, Ruszymah BH, Amaramalar SN
    Med J Malaysia, 2008 Jul;63 Suppl A:113-4.
    PMID: 19025011
    Spinal cord, sciatic nerve, olfactory ensheathing cell and bone marrow derived mesenchymal stem cells were evaluated as an alternative source for tissue engineering of nerve conduit. All cell sources were cultured in alpha-MEM medium. Olfactory Ensheathing Cell (OEC) showed the best result with higher growth kinetic compared to the others. Spinal cord and sciatic nerve were positive for GFAP, OEC were positive for GFAP, S100b and anti-cytokeratin 18 but negative for anti-Human Fibroblast.
    Matched MeSH terms: Tissue Engineering
  4. Ex vivo growth of rabbit bulbar, fornix and palpebral conjunctival epithelia in a serum-free and feeder layer-free culture system
    Nizam MH, Ruszymah BH, Chua KH, Ghafar NA, Hamzah JC
    Med J Malaysia, 2008 Jul;63 Suppl A:111-2.
    PMID: 19025010
    This study was conducted to explore the feasibility of culturing conjunctiva epithelial cells in serum-free and feeder layer-free culture system with regard to the cell morphology and immunocytochemistry of the rabbit bulbar, fornix and palpebral conjunctiva epithelia. The results showed that epithelium cells from all the three conjunctiva regions can be cultured in a serum-free and feeder layer-free environment. We obtained highest epithelial growth from fornix region with minimum invasion of fibroblast cells compared to other area. All cultured cells were stained positive for cytokeratin 19 and MUC5AC and negative for cytokeratin 3. These findings suggested that fornix was a better source of cells for the development of tissue engineered conjunctiva for future clinical application.
    Matched MeSH terms: Tissue Engineering
  5. Scanning electron microscopy of cornea re-epithelization after transplanted with bilayered corneal construct
    Masrudin SS, Ghafar NA, Saidi M, Aminuddin BS, Rahmat A, Ruszymah BH, et al.
    Med J Malaysia, 2008 Jul;63 Suppl A:109-10.
    PMID: 19025009
    The present work was to determine the development and re-epithelization of bilayered corneal construct (BCC) in vitro and in vivo using scanning electron microscopy (SEM). The in vitro BCC was transplanted to the rabbit's eye and after 90 days the BCC was harvested and analyzed. The corneas were processed for morphology studies. The result indicates that the BICC that was transplanted for 90 days showed good development and re-epithelization of epithelial layer similar to the normal cornea.
    Matched MeSH terms: Tissue Engineering
  6. The oil-absorbing property of polyhydroxyalkanoate films and its practical application: a refreshing new outlook for an old degrading material
    Sudesh K, Loo CY, Goh LK, Iwata T, Maeda M
    Macromol Biosci, 2007 Nov 12;7(11):1199-205.
    PMID: 17703476
    Polyhydroxyalkanoates (PHAs) have attracted the attention of academia and industry because of their plastic-like properties and biodegradability. However, practical applications as a commodity material have not materialized because of their high production cost and unsatisfactory mechanical properties. PHAs are also believed to have high-value applications as an absorbable biomaterial for tissue engineering and drug-delivery devices because of their biocompatibility. However, research in these areas is still in its very early stages. The main problem faced by proponents of PHAs is the lack of a niche area where PHAs will be the most desired material in terms of its function during use rather than because of its eco-friendly virtues after use. Here, we report on the oil-absorbing property of PHA films and its potential applications. By comparing with some of the existing commercial products, the potential application of PHAs as cosmetic oil-blotting films is revealed for the first time. Besides having the ability to rapidly absorb and retain oil, PHA films also have a natural oil-indicator property, showing obvious changes in opacity following oil absorption. Surface analysis revealed that the surface structures such as porosity and smoothness exert great influence on the rapid oil-absorption properties of the PHA films. These newly discovered properties could be exploited to create a niche area for the practical applications of PHAs.
    Matched MeSH terms: Tissue Engineering
  7. In vitro biocompatibility evaluation of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymer in fibroblast cells
    Siew EL, Rajab NF, Osman AB, Sudesh K, Inayat-Hussain SH
    J Biomed Mater Res A, 2007 May;81(2):317-25.
    PMID: 17120221
    Among the various biomaterials available for tissue engineering and therapeutic applications, microbial polyhydroxyalkanoates offer the most diverse range of thermal and mechanical properties. In this study, the biocompatibility of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB); containing 50 mol % of 4-hydroxybutyrate] copolymer produced by Delftia acidovorans was evaluated. The cytotoxicity, mode of cell death, and genotoxicity of P(3HB-co-4HB) extract against V79 and L929 fibroblast cells were assessed using MTT assay, acridine orange/propidium iodide staining, and alkaline comet assay, respectively. Our results demonstrate that P(3HB-co-4HB) treated on both cell lines were comparable with clinically-used Polyglactin 910, where more than 60% of viable cells were observed following 72-h treatment at 200 mg/mL. Further morphological investigation on the mode of cell death showed an increase in apoptotic cells in a time-dependent manner in both cell lines. On the other hand, P(3HB-co-4HB) at 200 mg/mL showed no genotoxic effects as determined by alkaline comet assay following 72-h treatment. In conclusion, our study indicated that P(3HB-co-4HB) compounds showed good biocompatibility in fibroblast cells suggesting that it has potential to be used for future medical applications.
    Matched MeSH terms: Tissue Engineering
  8. Fulltext Mechanoregulation of cardiac myofibroblast differentiation: implications for cardiac fibrosis and therapy
    Yong KW, Li Y, Huang G, Lu TJ, Safwani WK, Pingguan-Murphy B, et al.
    Am J Physiol Heart Circ Physiol, 2015 Aug 15;309(4):H532-42.
    PMID: 26092987 DOI: 10.1152/ajpheart.00299.2015
    Cardiac myofibroblast differentiation, as one of the most important cellular responses to heart injury, plays a critical role in cardiac remodeling and failure. While biochemical cues for this have been extensively investigated, the role of mechanical cues, e.g., extracellular matrix stiffness and mechanical strain, has also been found to mediate cardiac myofibroblast differentiation. Cardiac fibroblasts in vivo are typically subjected to a specific spatiotemporally changed mechanical microenvironment. When exposed to abnormal mechanical conditions (e.g., increased extracellular matrix stiffness or strain), cardiac fibroblasts can undergo myofibroblast differentiation. To date, the impact of mechanical cues on cardiac myofibroblast differentiation has been studied both in vitro and in vivo. Most of the related in vitro research into this has been mainly undertaken in two-dimensional cell culture systems, although a few three-dimensional studies that exist revealed an important role of dimensionality. However, despite remarkable advances, the comprehensive mechanisms for mechanoregulation of cardiac myofibroblast differentiation remain elusive. In this review, we introduce important parameters for evaluating cardiac myofibroblast differentiation and then discuss the development of both in vitro (two and three dimensional) and in vivo studies on mechanoregulation of cardiac myofibroblast differentiation. An understanding of the development of cardiac myofibroblast differentiation in response to changing mechanical microenvironment will underlie potential targets for future therapy of cardiac fibrosis and failure.
    Matched MeSH terms: Tissue Engineering
  9. Fulltext The use of collagen biomaterial in oral cancer: a systematic review
    Muhammad Lutfi Mohamed Halim, Nora Azirah Mohd Zayi, Mohd Yusof Mohamad, Mohd Hafiz Arzmi
    Malaysian Journal of Medicine and Health Sciences, 2019;15(108):33-33.
    MyJurnal
    Introduction: Oral cancer is the sixth most common malignancy in the world. It is a major concern in Southeast Asia primarily due to betel quid chewing, smoking, and alcohol consumption. In Malaysia, oral cancer related cases accounts for 1.55% of the cause of deaths. Despite recent advances in cancer diagnoses and therapies, the survival rate of oral cancer patients only reached 50% in the last few decades. Tissue engineering (TE) principles may pro-vide new technology platforms to study mechanisms of angiogenesis and tumour cell growth as well as potentially tumour cell spreading in cancer research. The use of biomaterial, appropriate cell source and proper signalling mol-ecules are vital components of TE. Collagen biomaterial are widely used scaffold or membrane in oral application. Nevertheless, no review has been performed on the its usage for the study of oral cancer. This study aimed to sys-tematically review the use of collagen scaffold in oral cancer application. Methods: Research articles were searched using Scopus, Pubmed and Web of Science (WOS) databases. The keywords were limited to “collagen membrane OR collagen scaffold” AND “oral cancer”. Results: Initial search yielded 61 papers (Scopus:37, Pubmed: 12, WOS: 12). Further scrutinization of the papers based on the inclusion criteria resulted total of 3 papers. Two of the papers used collagen membrane for regeneration of oral mucosal defect and increment of alveolar ridge height post-surgery. The remaining paper utilize collagen biomaterial as scaffold for the culture of adenoid cystic carcinoma (ACC) cells. All papers reported significant role of collagen biomaterial in terms of tissue formation, healing scaffold and cellular proliferation. Conclusion: Collagen utilization as biomaterial offers potential use for regeneration of oral related structures as well providing useful model for therapeutics anti-cancer research.
    Matched MeSH terms: Tissue Engineering
  10. Fulltext Enriched Mechanical Strength and Bone Mineralisation of Electrospun Biomimetic Scaffold Laden with Ylang Ylang Oil and Zinc Nitrate for Bone Tissue Engineering
    Mani MP, Jaganathan SK, Supriyanto E
    Polymers (Basel), 2019 Aug 08;11(8).
    PMID: 31398835 DOI: 10.3390/polym11081323
    Scaffolds supplemented with naturally derived materials seem to be a good choice in bone tissue engineering. This study aims to develop polyurethane (PU) nanofibers added with ylang ylang (YY) and zinc nitrate (ZnNO3) using the electrospinning method. Field emission scanning electron microscopy (FESEM) images showed that the diameter of the PU nanofibers (869 ± 122 nm) was reduced with the addition of YY and ZnNO3 (PU/YY-467 ± 132 nm and PU/YY/ZnNO3-290 ± 163 nm). Fourier transform infrared (FTIR), a thermal gravimetric analysis (TGA) and an X-ray diffraction (XRD) analysis confirmed the interactions between PU with YY and ZnNO3. In addition, a thermal gravimetric analysis (TGA) study revealed the improved thermal stability for PU/YY and a slight reduction in the thermal stability for PU/YY/ZnNO3. A tensile test indicated that the addition of YY and ZnNO3 (PU/YY-12.32 MPa and PU/YY/ZnNO3-14.90 MPa) improved the mechanical properties of the pristine PU (6.83 MPa). The electrospun PU/YY (524 nm) and PU/YY/ZnNO3 (284 nm) showed a reduced surface roughness when compared with the pristine PU (776 nm) as depicted in the atomic force microscopy (AFM) analysis. The addition of YY and ZnNO3 improved the anticoagulant and biocompatibility nature of the pristine PU. Furthermore, the bone mineralization study depicted the improved calcium deposition in the fabricated composites (PU/YY-7.919% and PU/YY/ZnNO3-10.150%) compared to the pristine PU (5.323%). Hence, the developed composites with desirable physico-chemical properties, biocompatibility and calcium deposition can serve as plausible candidates for bone tissue engineering.
    Matched MeSH terms: Tissue Engineering
  11. Insight into delivery of dermal fibroblast by non-biodegradable bacterial nanocellulose composite hydrogel on wound healing
    Loh EYX, Fauzi MB, Ng MH, Ng PY, Ng SF, Mohd Amin MCI
    Int J Biol Macromol, 2020 Sep 15;159:497-509.
    PMID: 32387606 DOI: 10.1016/j.ijbiomac.2020.05.011
    In skin tissue engineering, a biodegradable scaffold is usually used where cells grow, produce its own cytokines, growth factors, and extracellular matrix, until the regenerated tissue gradually replaces the scaffold upon its degradation. However, the role of non-biodegradable scaffold remains unexplored. This study investigates the potential of a non-biodegradable bacterial nanocellulose/acrylic acid (BNC/AA) hydrogel to transfer human dermal fibroblasts (HDF) to the wound and the resulting healing effects of transferred HDF in athymic mice. Results demonstrated that the fabricated hydrogel successfully transferred >50% of HDF onto the wound site within 24 h, with evidence of HDF detected on day 7. The gene and protein study unveiled faster wound healing in the hydrogel with HDF group and characterized more mature newly formed skin microstructure on day 7, despite no visible differences. These findings give a new perspective regarding the role of non-biodegradable materials in skin tissue engineering, in the presence of exogenous cells, mainly at the molecular level.
    Matched MeSH terms: Tissue Engineering
  12. Fulltext Fabrication of Adipose-Derived Stem Cell-Based Self-Assembled Scaffold under Hypoxia and Mechanical Stimulation for Urethral Tissue Engineering
    Rashidbenam Z, Jasman MH, Tan GH, Goh EH, Fam XI, Ho CCK, et al.
    Int J Mol Sci, 2021 Mar 25;22(7).
    PMID: 33805910 DOI: 10.3390/ijms22073350
    Long urethral strictures are often treated with autologous genital skin and buccal mucosa grafts; however, risk of hair ingrowth and donor site morbidity, restrict their application. To overcome this, we introduced a tissue-engineered human urethra comprising adipose-derived stem cell (ASC)-based self-assembled scaffold, human urothelial cells (UCs) and smooth muscle cells (SMCs). ASCs were cultured with ascorbic acid to stimulate extracellular matrix (ECM) production. The scaffold (ECM) was stained with collagen type-I antibody and the thickness was measured under a confocal microscope. Results showed that the thickest scaffold (28.06 ± 0.59 μm) was achieved with 3 × 104 cells/cm2 seeding density, 100 μg/mL ascorbic acid concentration under hypoxic and dynamic culture condition. The biocompatibility assessment showed that UCs and SMCs seeded on the scaffold could proliferate and maintain the expression of their markers (CK7, CK20, UPIa, and UPII) and (α-SMA, MHC and Smootheline), respectively, after 14 days of in vitro culture. ECM gene expression analysis showed that the ASC and dermal fibroblast-based scaffolds (control) were comparable. The ASC-based scaffold can be handled and removed from the plate. This suggests that multiple layers of scaffold can be stacked to form the urothelium (seeded with UCs), submucosal layer (ASCs only), and smooth muscle layer (seeded with SMCs) and has the potential to be developed into a fully functional human urethra for urethral reconstructive surgeries.
    Matched MeSH terms: Tissue Engineering
  13. Fulltext Current Update of Collagen Nanomaterials-Fabrication, Characterisation and Its Applications: A Review
    Lo S, Fauzi MB
    Pharmaceutics, 2021 Feb 28;13(3).
    PMID: 33670973 DOI: 10.3390/pharmaceutics13030316
    Tissue engineering technology is a promising alternative approach for improvement in health management. Biomaterials play a major role, acting as a provisional bioscaffold for tissue repair and regeneration. Collagen a widely studied natural component largely present in the extracellular matrix (ECM) of the human body. It provides mechanical stability with suitable elasticity and strength to various tissues, including skin, bone, tendon, cornea and others. Even though exogenous collagen is commonly used in bioscaffolds, largely in the medical and pharmaceutical fields, nano collagen is a relatively new material involved in nanotechnology with a plethora of unexplored potential. Nano collagen is a form of collagen reduced to a nanoparticulate size, which has its advantages over the common three-dimensional (3D) collagen design, primarily due to its nano-size contributing to a higher surface area-to-volume ratio, aiding in withstanding large loads with minimal tension. It can be produced through different approaches including the electrospinning technique to produce nano collagen fibres resembling natural ECM. Nano collagen can be applied in various medical fields involving bioscaffold insertion or fillers for wound healing improvement; skin, bone, vascular grafting, nerve tissue and articular cartilage regeneration as well as aiding in drug delivery and incorporation for cosmetic purposes.
    Matched MeSH terms: Tissue Engineering
  14. Fulltext Electrospun Combination of Peppermint Oil and Copper Sulphate with Conducive Physico-Chemical properties for Wound Dressing Applications
    Jaganathan SK, Mani MP, Khudzari AZM
    Polymers (Basel), 2019 Apr 01;11(4).
    PMID: 30960571 DOI: 10.3390/polym11040586
    The ultimate goal in tissue engineering is to fabricate a scaffold which could mimic the native tissue structure. In this work, the physicochemical and biocompatibility properties of electrospun composites based on polyurethane (PU) with added pepper mint (PM) oil and copper sulphate (CuSO₄) were investigated. Field Emission Electron microscope (FESEM) study depicted the increase in mean fiber diameter for PU/PM and decrease in fiber diameter for PU/PM/CuSO₄ compared to the pristine PU. Fourier transform infrared spectroscopy (FTIR) analysis revealed the formation of a hydrogen bond for the fabricated composites as identified by an alteration in PU peak intensity. Contact angle analysis presented the hydrophobic nature of pristine PU and PU/PM while the PU/PM/CuSO₄ showed hydrophilic behavior. Atomic force microscopy (AFM) analysis revealed the increase in the surface roughness for the PU/PM while PU/PM/CuSO₄ showed a decrease in surface roughness compared to the pristine PU. Blood compatibility studies showed improved blood clotting time and less toxic behavior for the developed composites than the pristine PU. Finally, the cell viability of the fabricated composite was higher than the pristine PU as indicated in the MTS assay. Hence, the fabricated wound dressing composite based on PU with added PM and CuSO₄ rendered a better physicochemical and biocompatible nature, making it suitable for wound healing applications.
    Matched MeSH terms: Tissue Engineering
  15. Fulltext Comparative evaluation of osteogenic differentiation potential of stem cells derived from dental pulp and exfoliated deciduous teeth cultured over granular hydroxyapatite based scaffold
    Hagar MN, Yazid F, Luchman NA, Ariffin SHZ, Wahab RMA
    BMC Oral Health, 2021 May 15;21(1):263.
    PMID: 33992115 DOI: 10.1186/s12903-021-01621-0
    BACKGROUND: Mesenchymal stem cells isolated from the dental pulp of primary and permanent teeth can be differentiated into different cell types including osteoblasts. This study was conducted to compare the morphology and osteogenic potential of stem cells from exfoliated deciduous teeth (SHED) and dental pulp stem cells (DPSC) in granular hydroxyapatite scaffold (gHA). Preosteoblast cells (MC3T3-E1) were used as a control group.

    METHODOLOGY: The expression of stemness markers for DPSC and SHED was evaluated using reverse transcriptase-polymerase chain reaction (RT-PCR). Alkaline phosphatase assay was used to compare the osteoblastic differentiation of these cells (2D culture). Then, cells were seeded on the scaffold and incubated for 21 days. Morphology assessment using field emission scanning electron microscopy (FESEM) was done while osteogenic differentiation was detected using ALP assay (3D culture).

    RESULTS: The morphology of cells was mononucleated, fibroblast-like shaped cells with extended cytoplasmic projection. In RT-PCR study, DPSC and SHED expressed GAPDH, CD73, CD105, and CD146 while negatively expressed CD11b, CD34 and CD45. FESEM results showed that by day 21, dental stem cells have a round like morphology which is the morphology of osteoblast as compared to day 7. The osteogenic potential using ALP assay was significantly increased (p 

    Matched MeSH terms: Tissue Engineering
  16. Massive Traumatic Skin Defect Successfully Treated with Autologous, Bilayered, Tissue-Engineered MyDerm Skin Substitute: A Case Report
    Mohamed Haflah NH, Ng MH, Mohd Yunus MH, Naicker AS, Htwe O, Abdul Razak KA, et al.
    JBJS Case Connect, 2018 6 15;8(2):e38.
    PMID: 29901479 DOI: 10.2106/JBJS.CC.17.00250
    CASE: A 22-year-old man sustained a laceration that measured 180 cm, after debridement, over the anterolateral aspect of the right leg following a road traffic accident. The wound was treated with MyDerm (Universiti Kebangsaan Malaysia), a cell-based, bilayered, bioengineered dermal substitute that contains no animal-derived components and is fully autologous. For its construction, only a small area of skin was harvested from the left groin, which was closed primarily with absorbable sutures.

    CONCLUSION: MyDerm is an alternative option for the treatment of a massive skin defect in patients who desire removal of only a negligible amount of skin from the donor site and when use of an autograft is insufficient.

    Matched MeSH terms: Tissue Engineering
  17. Fulltext Ex-vivo differentiation of stem cells from human extracted deciduous teeth into bone forming cells
    Fazliah, S.N., Jaafar, S., Shamsuddin, S., Zainudin, Z., Hilmi, A.B., Razila, A.R., et al.
    ASM Science Journal, 2010;4(1):1-14.
    MyJurnal
    Stem cells from human extracted deciduous teeth (SHED) have the ability to multiply much faster and double their population in culture at a greater rate, indicating that it may be in a more immature state than other type of adult stem cells. Mesenchymal stem cells (MSC) from human primary molars were isolated and cultured in media supplemented with 20% fetal bovine serum. The MSCs were confirmed using CD 105 and CD 166 and the identification of the osteoblast cells were done using reverse transcriptase polymerase chain reaction (RT-PCR) analysis. Differentiated osteoblast cells (DOC) were characterized by alkaline phosphotase and von Kossa staining followed by immunocytochemistry staining using osteocalcin and osteonectin antibodies. Further validation of SHED was done by RT-PCR to detect the presence of insulin-like growth factor 2 (IGF-2) and discoidin domain tyrosine kinase-2 (DDTK-2) transcripts, while the presence of Runx-2 mRNA was used to characterize DOC. The results showed that SHED was found positive for CD 105 and CD 166 and could differentiate into osteoblast, bone forming cells. The findings revealed the presence of distinct MSC population which had the capability to generate living human cells that could be a possible source for tissue engineering in the future.
    Matched MeSH terms: Tissue Engineering
  18. Fulltext Cell-based therapy for the treatment of focal articular cartilage lesions: a review of six years od studies in a Malaysian University Medical Centre
    Samsudin EZ, Kamarul T
    JUMMEC, 2014;17(2):1-11.
    MyJurnal
    Autologous chondrocyte implantation (ACI) is a significant technique that has gained widespread use for the treatment of focal articular cartilage damage. Since its inception in 2004, the Tissue Engineering Group (TEG) of the Faculty of Medicine, University Malaya has been dedicated to carrying out extensive research on this cell-based therapy. The objective of this report, comprising one clinical case report, six animal studies and one laboratory study, is to summarise and discuss TEG’s key findings. On the whole, we observed that the ACI technique was effective in regenerating hyaline-like cartilage in treated defects. Autologous chondrocytes and mesenchymal stem cells (MSC) were found to produce comparable tissue repair irrespective of the state of MSC differentiation, and the use of alginate-based scaffolding and oral pharmacotherapy (Glucosamine and Chondroitin Sulphate) was shown to enhance ACI-led tissue repair. ACI is suggested to be an efficient therapeutic option for the treatment of articular cartilage defects of the knee.
    Matched MeSH terms: Tissue Engineering
  19. Fulltext Stem cells from childrens' teeth
    Mohd Hilmi, A.B., Fazliah, S.N., Siti Fadilah, A., Asma, H., Siti Razila, A.R., Shaharum, S., et al.
    Archives of Orofacial Sciences, 2008;3(1):29-31.
    MyJurnal
    The aim of this study was to isolate stem cells from dental pulp of primary molars and incisors to be used as possible source for tissue engineering. Human primary molars and incisors were collected from subjects aged 4-7 year-old under standardized procedures. Within 24 hours, the tooth was cut at the cemento-enamel junction using hard tissue material cutter. The dental pulp tissue was extracted, digested and then cultured in Alpha Modified Eagles's Medium (α-MEM) supplemented with 20% FCS, 100 mM L-ascorbic acid 2-phosphate, 200 mM L-glutamine and 5000 units/ml Penicillin/Streptomycin. The cells were observed daily under the microscope until confluence. Children's tooth pulp- derived progenitor cells were found positive for stem cell markers CD105 and CD166, which are consistent with the finding for mesenchymal stem cells (MSCs) from bone marrow.
    Matched MeSH terms: Tissue Engineering
  20. Highly porous of hydroxyethyl cellulose biocomposite scaffolds for tissue engineering
    Zulkifli FH, Hussain FSJ, Harun WSW, Yusoff MM
    Int J Biol Macromol, 2019 Feb 01;122:562-571.
    PMID: 30365990 DOI: 10.1016/j.ijbiomac.2018.10.156
    This study is focusing to develop a porous biocompatible scaffold using hydroxyethyl cellulose (HEC) and poly (vinyl alcohol) (PVA) with improved cellular adhesion profiles and stability. The combination of HEC and PVA were synthesized using freeze-drying technique and characterized using SEM, ATR-FTIR, TGA, DSC, and UTM. Pore size of HEC/PVA (2-40 μm) scaffolds showed diameter in a range of both pure HEC (2-20 μm) and PVA (14-70 μm). All scaffolds revealed high porosity above 85%. The water uptake of HEC was controlled by PVA cooperation in the polymer matrix. After 7 days, all blended scaffolds showed low degradation rate with the increased of PVA composition. The FTIR and TGA results explicit possible chemical interactions and mass loss of blended scaffolds, respectively. The Tg values of DSC curved in range of HEC and PVA represented the miscibility of HEC/PVA blend polymers. Higher Young's modulus was obtained with the increasing of HEC value. Cell-scaffolds interaction demonstrated that human fibroblast (hFB) cells adhered to polymer matrices with better cell proliferation observed after 7 days of cultivation. These results suggested that biocompatible of HEC/PVA scaffolds fabricated by freeze-drying method might be suitable for skin tissue engineering applications.
    Matched MeSH terms: Tissue Engineering
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links