Displaying publications 361 - 380 of 622 in total

Abstract:
Sort:
  1. Hannan MA, Lipu MSH, Hussain A, Ker PJ, Mahlia TMI, Mansor M, et al.
    Sci Rep, 2020 Mar 13;10(1):4687.
    PMID: 32170100 DOI: 10.1038/s41598-020-61464-7
    State of charge (SOC) is a crucial index used in the assessment of electric vehicle (EV) battery storage systems. Thus, SOC estimation of lithium-ion batteries has been widely investigated because of their fast charging, long-life cycle, and high energy density characteristics. However, precise SOC assessment of lithium-ion batteries remains challenging because of their varying characteristics under different working environments. Machine learning techniques have been widely used to design an advanced SOC estimation method without the information of battery chemical reactions, battery models, internal properties, and additional filters. Here, the capacity of optimized machine learning techniques are presented toward enhanced SOC estimation in terms of learning capability, accuracy, generalization performance, and convergence speed. We validate the proposed method through lithium-ion battery experiments, EV drive cycles, temperature, noise, and aging effects. We show that the proposed method outperforms several state-of-the-art approaches in terms of accuracy, adaptability, and robustness under diverse operating conditions.
  2. Kumar A, Jain A, Sayyed MI, Laariedh F, Mahmoud KA, Nebhen J, et al.
    Sci Rep, 2021 Apr 08;11(1):7784.
    PMID: 33833308 DOI: 10.1038/s41598-021-87256-1
    Nuclear radiation shielding capabilities for a glass series 20Bi2O3 - xPbO - (80 - 2x)B2O3 - xGeO2 (where x = 5, 10, 20, and 30 mol%) have been investigated using the Phy-X/PSD software and Monte Carlo N-Particle transport code. The mass attenuation coefficients (μm) of selected samples have been estimated through XCOM dependent Phy-X/PSD program and MCNP-5 code in the photon-energy range 0.015-15 MeV. So obtained μm values are used to calculate other γ-ray shielding parameters such as half-value layer (HVL), mean-free-path (MFP), etc. The calculated μm values were found to be 71.20 cm2/g, 76.03 cm2/g, 84.24 cm2/g, and 90.94 cm2/g for four glasses S1 to S4, respectively. The effective atomic number (Zeff)values vary between 69.87 and 17.11 for S1 or 75.66 and 29.11 for S4 over 0.05-15 MeV of photon-energy. Sample S4, which has a larger PbO/GeO2 of 30 mol% in the bismuth-borate glass, possesses the lowest MFP and HVL, providing higher radiation protection efficiency compared to all other combinations. It shows outperformance while compared the calculated parameters (HVL and MFP) with the commercial shielding glasses, different alloys, polymers, standard shielding concretes, and ceramics. Geometric Progression (G-P) was applied for evaluating the energy absorption and exposure buildup factors at energies 0.015-15 MeV with penetration depths up to 40 mfp. The buildup factors showed dependence on the MFP and photon-energy as well. The studied samples' neutron shielding behavior was also evaluated by calculating the fast neutron removal cross-section (ΣR), i.e. found to be 0.139 cm-1 for S1, 0.133 cm-1 for S2, 0.128 cm-1 for S3, and 0.12 cm-1 for S4. The results reveal a great potential for using a glass composite sample S4 in radiation protection applications.
  3. Iswadi MI, Ann ZF, Hafiz MM, Hafiz MD, Fahrul FJ, Hajarian H, et al.
    Open Vet J, 2012;2(1):109-14.
    PMID: 26623302
    The Malayan gaur (Bos gaurus hubbacki) or Seladang is classified as vulnerable by the International Union for Conservation of Nature and Natural Resources (IUCN). The Malayan gaur is mainly distributed in the tropical woodlands of Peninsular Malaysia and Southern Thailand. The aim of this study was to collect, analyze and cryopreserve the semen of wild Malayan gaur. Transrectal massage (TM) and electroejaculation (EEJ) technique was applied in semen collection of the Malayan gaur. The semen was then cryopreserved in liquid nitrogen using slow freezing technique. Makler counting chamber was used to evaluate sperm concentration and motility, while the sperm viability and morphology of fresh and post-thaw sperm was determined using eosin-nigrosin staining protocol. As a result, we have successfully collected the Malayan gaur semen using EEJ technique. Sperm motility, viability and morphological changes of the post-thaw semen of Malayan gaur were found undesirable due to the complication of the cryopreservation process. On the basis of current study it can be concluded that Malayan gaur bulls semen can be obtain by EEJ with no evidence of rectal trauma. Optimization of the process of cryopreservation for Malayan gaur sperm is needed to maintain the cryoviability of the good sperm quality. The data generated in this study would be useful in conservation of genetic diversity program for Malayan gaur.
  4. Elsafi M, Alrashedi MF, Sayyed MI, Al-Hamarneh IF, El-Nahal MA, El-Khatib M, et al.
    Materials (Basel), 2021 Jul 14;14(14).
    PMID: 34300846 DOI: 10.3390/ma14143928
    This paper aims to study the radiation shielding characteristics and buildup factor of some types of granite in Egypt. The mass attenuation coefficient (MAC) for three types of granite (gandola, white halayeb, and red aswani) was experimentally determined, and the experimental results were validated by XCOM software. The relative deviation between the two methods does not exceed 3% in all discussed granite samples, which means that MAC calculated through the experimental and XCOM are in suitable agreement. The effective atomic number (Zeff) varies from 13.64 to 10.69, 13.68 to 10.59, and 13.45 and 10.66 for gandola, white halayeb, and red aswani, respectively. As well as the equivalent atomic number (Zeq) was calculated in a wide range of energy to deduce the exposure (EBF) and energy absorption (EABF) buildup factors for the studied granite materials. The linear attenuation coefficient (LAC), half-value layer (HVL), mean free path (MFP) were calculated at each investigated energy and showed that the most effective shielding ability at high energy was red aswani, while at low energy, the shielding ability was nearly constant for studied granites. The present study forms the first endeavor to obtain the radiation shielding properties of the studied materials to be used in practical applications.
  5. Khadijah S, Wahaf ANS, Syahmi MI, Tan TK, Low VL, Azrul LM, et al.
    Trop Biomed, 2018 Dec 01;35(4):999-1006.
    PMID: 33601847
    This paper reports total nematode anthelmintic resistance towards albendazole, fenbendazole, levamisole and ivermectin in a commercial sheep farm located in Terengganu, Malaysia. Faecal Egg Count Reduction Test (FECRT) was conducted on 25 sheep, where five sheep in each group were treated with the respective four anthelmintics based on live bodyweight. The balance of five sheep placed in the control group were not treated with any anthelmintics. At day 13 post-treatment, faecal egg count was conducted and nematode worm egg count reduction percentage was calculated to determine the resistance status towards the respective anthelmintics tested. Results showed that nematodes were resistant to all the anthelmintics tested, namely albendazole, fenbendazole, levamisole and ivermectin with reduction percentage of 87%, 46%, 94% and 68%, respectively. Subsequently, the third stage larvae of Haemonchus contortus and Trichostrongylus colubriformis recovered from post-treatment faecal cultures were subjected to allele-specific polymerase chain reaction (AS-PCR) assay to determine the presence of the benzimidazole resistance gene. This study reports the occurrence of the classical F200Y mutation in the isotype 1 βtubulin gene, for the first time in Malaysia.
  6. Chan LF, Mohamad Adam B, Norazlin KN, Siti Haida MI, Lee VY, Norazura AW, et al.
    J Adolesc, 2016 10;52:162-9.
    PMID: 27572955 DOI: 10.1016/j.adolescence.2016.08.006
    Pregnant adolescents are a high-risk population for suicide. However, a knowledge gap still exists on how sexual and religious knowledge, attitudes and practices (KAP) influence suicidal ideation (SI) in teenage pregnancy. We aim to explore the interplay between psychiatric diagnoses, sociodemographic factors and KAP of sexual and religious issues as risk factors of SI among 114 pregnant Malaysian adolescents from 6 rehabilitation centers and a tertiary hospital. Single sexual partner was an independent predictor of SI, suggesting the role of less sexual experience as a risk factor for SI after controlling for major depression. Participants who were unsure versus those who agreed with the statement that most religions' viewed sex outside marriage as wrong had a lower risk of SI after controlling for major depression. Pregnant adolescents with a single sexual partner were significantly associated with current SI. Ambivalence towards religious prohibitions on premarital sex may protect against suicidal ideation.
  7. Haniff MASM, Hafiz SM, Huang NM, Rahman SA, Wahid KAA, Syono MI, et al.
    ACS Appl Mater Interfaces, 2017 May 03;9(17):15192-15201.
    PMID: 28418234 DOI: 10.1021/acsami.7b02833
    This paper presents a straightforward plasma treatment modification of graphene with an enhanced piezoresistive effect for the realization of a high-performance pressure sensor. The changes in the graphene in terms of its morphology, structure, chemical composition, and electrical properties after the NH3/Ar plasma treatment were investigated in detail. Through a sufficient plasma treatment condition, our studies demonstrated that plasma-treated graphene sheet exhibits a significant increase in sensitivity by one order of magnitude compared to that of the unmodified graphene sheet. The plasma-doping introduced nitrogen (N) atoms inside the graphene structure and was found to play a significant role in enhancing the pressure sensing performance due to the tunneling behavior from the localized defects. The high sensitivity and good robustness demonstrated by the plasma-treated graphene sensor suggest a promising route for simple, low-cost, and ultrahigh resolution flexible sensors.
  8. Veiga MI, Asimus S, Ferreira PE, Martins JP, Cavaco I, Ribeiro V, et al.
    Eur J Clin Pharmacol, 2009 Apr;65(4):355-63.
    PMID: 18979093 DOI: 10.1007/s00228-008-0573-8
    AIM: The aim of this study was to obtain pharmacogenetic data in a Vietnamese population on genes coding for proteins involved in the elimination of drugs currently used for the treatment of malaria and human immunodeficiency virus/acquired immunodeficiency syndrome.

    METHOD: The main polymorphisms on the cytochrome P450 (CYP) genes, CYP2A6, CYP2B6, CYP2C19, CYP2D6, CYP3A4 and CYP3A5, and the multi-drug resistance 1 gene (MDR1) were genotyped in 78 healthy Vietnamese subjects. Pharmacokinetic metrics were available for CYP2A6 (coumarin), CYP2C19 (mephenytoin), CYP2D6 (metoprolol) and CYP3As (midazolam), allowing correlations with the determined genotype.

    RESULTS: In the CYP2 family, we detected alleles CYP2A6*4 (12%) and *5 (15%); CYP2B6*4 (8%), *6 (27%); CYP2C19*2 (31%) and *3 (6%); CYP2D6*4, *5, *10 (1, 8 and 44%, respectively). In the CYP3A family, CYP3A4*1B was detected at a low frequency (2%), whereas CYP3A5 *3 was detected at a frequency of 67%. The MDR1 3435T allele was present with a prevalence of 40%. Allele proportions in our cohort were compared with those reported for other Asian populations. CYP2C19 genotypes were associated to the S-4'-OH-mephenytoin/S-mephenytoin ratio quantified in plasma 4 h after intake of 100 mg mephenytoin. While CYP2D6 genotypes were partially reflected by the alpha-OH-metroprolol/metoprolol ratio in plasma 4 h after dosing, no correlation existed between midazolam plasma concentrations 4 h post-dose and CYP3A genotypes.

    CONCLUSIONS: The Vietnamese subjects of our study cohort presented allele prevalences in drug-metabolising enzymes that were generally comparable with those reported in other Asian populations. Deviations were found for CYP2A6*4 compared to a Chinese population (12 vs. 5%, respectively; P = 0.023), CYP2A6*5 compared with a Korean population (15 vs. <1%, respectively; P < 0.0001), a Malaysian population (1%; P < 0.0001) and a Chinese population (1%; P < 0.0001); CYP2B6*6 compared with a Korean population (27 vs. 12%; P = 0.002) and a Japanese population (16%; P = 0.021). Pharmacokinetic metrics versus genotype analysis reinforces the view that the predictive value of certain globally common variants (e.g. CYP2D6 single nucleotide polymorphisms) should be evaluated in a population-specific manner.

  9. Elsafi M, Dib MF, Mustafa HE, Sayyed MI, Khandaker MU, Alsubaie A, et al.
    Materials (Basel), 2021 Dec 19;14(24).
    PMID: 34947471 DOI: 10.3390/ma14247878
    We prepared red clays by introducing different percentages of PbO, Bi2O3, and CdO. In order to understand how the introduction of these oxides into red clay influences its attenuation ability, the mass attenuation coefficient of the clays was experimentally measured in a lab using an HPGe detector. The theoretical shielding capability of the material present was obtained using XCOM to verify the accuracy of the experimental results. We found that the experimental and theoretical values agree to a very high degree of precision. The effective atomic number (Zeff) of pure red clay, and red clay with the three metal oxides was determined. The pure red clay had the lowest Zeff of the tested samples, which means that introducing any of these three oxides into the clay will greatly enhance its Zeff, and consequently its attenuation capability. Additionally, the Zeff for red clay with 10 wt% CdO is lower than the Zeff of red clay with 10 wt% Bi2O3 and PbO. We also prepared red clay using 10 wt% CdO nanoparticles and compared its attenuation ability with the red clay prepared with 10 wt% PbO, Bi2O3, and CdO microparticles. We found that the MAC of the red clay with 10 wt% nano-CdO was higher than the MAC of the clay with microparticle samples. Accordingly, nanoparticles could be a useful way to enhance the shielding ability of current radiation shielding materials.
  10. El-Nahal MA, Elsafi M, Sayyed MI, Khandaker MU, Osman H, Elesawy BH, et al.
    Materials (Basel), 2021 Oct 28;14(21).
    PMID: 34772013 DOI: 10.3390/ma14216487
    The aim of this study is to investigate the radiation shielding properties of novel concrete samples with bulk Bi2O3 and Bi2O3 nanoparticles (Bi2O3 NP) incorporated into its composition. The mass attenuation coefficient of the concrete samples without Bi2O3 and with 5 and 7 wt% bulk Bi2O3 were experimentally determined and were compared against values obtained using the XCOM and Geant4 simulations. Both methods greatly agree with the experimental values. The linear attenuation coefficients (LAC) of blank concrete (C-0), concrete with 5% bulk Bi2O3 (C-B5), and concrete with 5% nanoparticle Bi2O3 (C-N5) were determined and compared at a wide energy range. We found that the LAC follows the trend of C-0 < C-B5 < C-N5 at all the tested energies. Since both C-B5 and C-N5 have a greater LAC than C-0, these results indicate that the addition of Bi2O3 improves the shielding ability of the concretes. In addition, we investigated the influence of nanoparticle Bi2O3 on the LAC of the concretes. The half-value layer (HVL) for the concretes with bulk Bi2O3 and Bi2O3 nanoparticles is also investigated. At all energies, the C-0 has the greatest HVL, while C-N15 has the least. Thus, C-N15 concrete is the most space efficient, while C-0 is the least space efficient. The radiation protection efficiency (RPE) of the prepared concretes was found to decrease with increasing energy for all five samples. For C-0, the RPE decreased from 63.3% at 0.060 MeV to 13.48% at 1.408 MeV, while for C-N15, the RPE decreased from 87.9 to 15.09% for the same respective energies. Additionally, C-N5 had a greater RPE than C-B5, this result demonstrates that Bi2O3 NP are more efficient at shielding radiation than bulk Bi2O3.
  11. Equbal A, Equbal MA, Equbal MI, Ravindrannair P, Khan ZA, Badruddin IA, et al.
    Materials (Basel), 2022 Nov 15;15(22).
    PMID: 36431537 DOI: 10.3390/ma15228051
    The present study investigates the CNC milling performance of the machining of AISI 316 stainless steel using a carbide cutting tool insert. Three critical machining parameters, namely cutting speed (v), feed rate (f) and depth of cut (d), each at three levels, are chosen as input machining parameters. The face-centred central composite design (FCCCD) of the experiment is based on response surface methodology (RSM), and machining performances are measured in terms of material removal rate (MRR) and surface roughness (SR). Analysis of variance, response graphs, and three-dimensional surface plots are used to analyse experimental results. Multi-response optimization using the data envelopment analysis based ranking (DEAR) approach is used to find the ideal configuration of the machining parameters for milling AISI 316 SS. The variables v = 220 m/min, f = 0.20 mm/rev and d = 1.2 mm were obtained as the optimal machine parameter setting. Study reveals that MRR is affected dominantly by d followed by v. For SR, f is the dominating factor followed by d. SR is found to be almost unaffected by v. Finally, it is important to state that this work made an attempt to successfully machine AISI 316 SS with a carbide cutting tool insert, to investigate the effect of important machining parameters on MRR and SR and also to optimize the multiple output response using DEAR method.
  12. Uppin VS, Gouda PSS, Kittur MI, Andriyana A, Ang BC, Parveez B, et al.
    Materials (Basel), 2022 Nov 30;15(23).
    PMID: 36500042 DOI: 10.3390/ma15238545
    Graphene-based fillers possess exceptional properties that encourage researchers toward their incorporation in glass-epoxy (GE) polymer composites. Regarding the mechanical and wear properties of glass-epoxy composites, the effect of graphene oxide (GO) reinforced in glass-epoxy was examined. A decrease in tensile modulus and increase in tensile strength was reported for 1 wt. % of GO. A shift in glass transition temperature Tg was observed with the addition of GO. The cross-link density and storage modulus of the composite decreased with the addition of GO. The decrease in dissipation energy and wear rate was reported with the increase in GO concentration. A simple one-dimensional damage model of nonlinear nature was developed to capture the stress-strain behavior of the unfilled and filled glass-epoxy composite. Tensile modulus E, Weibull scale parameter σo, and Weibull shape parameter β were considered to develop the model. Finally, to understand the failure mechanisms in GO-filled composites, a scanning electron microscopic (SEM) examination was carried out for tensile fractured composites.
  13. Nafeeza MI, Shahimi MM, Kudva MV, Ahmad H, Isa MR, Sood IM, et al.
    Singapore Med J, 1992 Dec;33(6):570-4.
    PMID: 1488663
    This randomised double blind placebo controlled study evaluated the effectiveness of colloidal bismuth subcitrate (CBS), ampicillin and their combination in the treatment of Helicobacter Pylori in non-ulcer dyspepsia (NUD) and assessed if elimination of this organism is associated with improvement of gastritis and the symptoms. Forty-eight NUD patients with H. pylori and histologic gastritis were randomly allocated to one of the three regimens for 28 days. Symptoms were assessed before and after treatment. Forty-three patients completed the trial. Repeat endoscopy within 48 hours of completing treatment showed suppression of H. pylori in 6 of 7 patients (85.7%) on combined therapy and one of 8 patients (12.5%) on CBS therapy (p = 0.0205). There was no suppression of the bacteria in patients treated with ampicillin. Repeat endoscopy performed 2 weeks after completing treatment showed suppression of H. pylori in 3 of 7 patients (42.9%) on combined therapy and none in the other two groups. Patients on combined therapy who had suppression of H. pylori, 48 hours or 2 weeks after completing treatment were noted to have historical improvement of their gastritis (p = 0.0001 and p = 0.05 respectively). This was also associated with improvement of symptoms in these patients.
  14. Harith AA, Mohamed Z, Mohammad A, Lim KK, Reffin N, Mohd Fadzil M, et al.
    Med J Malaysia, 2023 Sep;78(5):653-660.
    PMID: 37775494
    INTRODUCTION: Healthcare drivers, including ambulance drivers, were less concerned about health and safety during the COVID-19 pandemic, with not only the risk of COVID-19 infection but also a higher risk of prolonged states of alertness, stress, burnout, fatigue and road traffic accident. This study aimed to determine the prevalence of stress and its associated factors among healthcare drivers, especially during the COVID-19 pandemic.

    MATERIALS AND METHODS: This study employs a crosssectional study design and utilises self-reported data obtained from locally validated personal stress inventory questionnaires. The data collection period spanned from August 1 to 31, 2020. The study sample consisted of 163 healthcare drivers affiliated with the Negeri Sembilan State Health Department. The Chi-square test and Fisher's exact test were the first used to determine the association between variables prior to conducting multiple logistic regression to predict the relationship between dependent and independent variables.

    RESULTS: In COVID-19's first year, 7.4% (n = 12) of healthcare drivers reported perceived stress with ambulance drivers reporting more stress (10.6%; n = 5) than non-ambulance drivers (6.0%; n = 7). Simple statistical analysis identified perceived stress significantly associated with household income, smoking status and performing on-call. Further analysis by multiple logistic regression found that perceived stress was significantly related to smoking (aOR 19.9, 95% CI: 1.86-213.90), and performing on-call (aOR 8.69, 95% CI 1.21-62.28). Nevertheless, no association was found between perceived stress and age, ethnicity, marital status, education, household income, co-morbidities, driving assignment, employment duration, needing a part-time job or motor vehicle accident history.

    CONCLUSION: The study found that the perceived stress amongst Malaysian healthcare drivers during the COVID-19 pandemic was relatively low. This could be due to fewer lifethreatening tasks, emergencies, assigned tasks and increase income due to overtime during the COVD-19 pandemic. The OSH team's efforts to provide consistent safety and health training, including stress management, may have contributed to the healthcare driver's ability to effectively manage the stressful circumstances encountered during the pandemic. In order to enhance salary competitiveness, employers should provide financial management education alongside subsidised housing and childcare provisions. Healthcare drivers who smoke should be taught different stress reduction techniques so that they can handle their stress in a healthy way.

  15. Hanfi MYM, Masoud MS, Sayyed MI, Khandaker MU, Faruque MRI, Bradley DA, et al.
    PLoS One, 2021;16(3):e0249329.
    PMID: 33788889 DOI: 10.1371/journal.pone.0249329
    Uranium, perhaps the most strategically important component of heavy minerals, finds particular significance in the nuclear industry. In prospecting trenches, the radioactivity of 238U and 232Th provides a good signature of the presence of heavy minerals. In the work herein, the activity concentrations of several key primordial radionuclides (238U, 232Th, and 40K) were measured in prospecting trenches (each of the latter being of approximately the same geometry and physical situation). All of these are located in the Seila area of the South Eastern desert of Egypt. A recently introduced industry standard, the portable hand-held RS-230 BGO gamma-ray spectrometer (1024 channels) was employed in the study. Based on the measured data, the trenches were classified as either non-regulated (U activity less than 1000 Bq kg-1) or regulated (with 238U activity more than 1000 Bq kg-1). Several radiological hazard parameters were calculated, statistical analysis also being performed to examine correlations between the origins of the radionuclides and their influence on the calculated values. While the radioactivity and hazard parameters exceed United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) guided limits, the mean annual effective doses of 0.49 and 1.4 mSv y-1 in non-regulated and regulated trenches respectively remain well below the International Commission on Radiological Protection (ICRP) recommended 20 mSv/y maximum occupational limit. This investigation reveals that the studied area contains high uranium content, suitable for extraction of U-minerals for use in the nuclear fuel cycle.
  16. Khandaker MU, Chijioke NO, Heffny NAB, Bradley DA, Alsubaie A, Sulieman A, et al.
    Foods, 2021 Feb 10;10(2).
    PMID: 33578933 DOI: 10.3390/foods10020381
    While the consumption of seaweed and seaweed-based products is very common amongst East Asian nations, forming a notable component of the daily diet, relatively very few studies have concerned the concentrations of heavy metals in these together with potential effects on human health. The present study analyses the concentrations of 17 elements in locally resourced seaweed, also assessing potential noncarcinogenic and carcinogenic risks. The samples were ground, homogenized, and quantified using the ICP-OES technique. It has been found that the essential elements K, Ca, Mg, Zn, and Na typically show concentrations somewhat greater than a number of potentially toxic metals, in particular, Cd, Pb, Ag, and As, with exceptions being Ni, Cr-VI, and Si. Statistical analysis indicates all of the latter to have similar origin, with increased concentration of these metals within the marine ecosystem. While the daily estimated intake of most metals is seen to be within the daily dietary allowance level recommended by various international organizations, the noncarcinogenic risk shows a value greater than unity, estimated via the hazard quotient. This indicates a potential for adverse effects to health arising from consumption of the sampled seaweed. The carcinogenic risk resulting from nonessential elements shows values greater than the United States Environmental Protection Agency (US-EPA) reference limit of 10-4. Considering the nonbiodegradability of heavy metals and metalloids and their potential accumulation in seaweed, there is need for critical examination of metal levels in the seaweeds obtained from the present study locations, together with the introduction of practices of removal of heavy metals via bio-adsorbent techniques.
  17. Ravishankar D, Salamah M, Akimbaev A, Williams HF, Albadawi DAI, Vaiyapuri R, et al.
    Sci Rep, 2018 Jun 22;8(1):9528.
    PMID: 29934595 DOI: 10.1038/s41598-018-27809-z
    Flavonoids exert innumerable beneficial effects on cardiovascular health including the reduction of platelet activation, and thereby, thrombosis. Hence, flavonoids are deemed to be a molecular template for the design of novel therapeutic agents for various diseases including thrombotic conditions. However, the structure-activity relationships of flavonoids with platelets is not fully understood. Therefore, this study aims to advance the current knowledge on structure-activity relationships of flavonoids through a systematic analysis of structurally-related flavones. Here, we investigated a panel of 16 synthetic flavones containing hydroxy or methoxy groups at C-7,8 positions on the A-ring, with a phenyl group or its bioisosteres as the B-ring, along with their thio analogues possessing a sulfur molecule at the 4th carbon position of the C-ring. The antiplatelet efficacies of these compounds were analysed using human isolated platelets upon activation with cross-linked collagen-related peptide by optical aggregometry. The results demonstrate that the hydroxyl groups in flavonoids are important for optimum platelet inhibitory activities. In addition, the 4-C=O and B ring phenyl groups are less critical for the antiplatelet activity of these flavonoids. This structure-activity relationship of flavonoids with the modulation of platelet function may guide the design, optimisation and development of flavonoid scaffolds as antiplatelet agents.
  18. Yaqoob AA, Ahmad H, Parveen T, Ahmad A, Oves M, Ismail IMI, et al.
    Front Chem, 2020;8:341.
    PMID: 32509720 DOI: 10.3389/fchem.2020.00341
    Nanoparticles (nanoparticles) have received much attention in biological application because of their unique physicochemical properties. The metal- and metal oxide-supported nanomaterials have shown significant therapeutic effect in medical science. The mechanisms related to the interaction of nanoparticles with animal and plant cells can be used to establish its significant role and to improve their activity in health and medical applications. Various attempts have been made to discuss the antibiotic resistance and antimicrobial activity of metal-supported nanoparticles. Despite all these developments, there is still a need to investigate their performance to overcome modern challenges. In this regard, the present review examines the role of various types of metal-supported nanomaterials in different areas such as antibacterial, antifungal, anticancer, and so on. Based on the significant ongoing research and applications, it is expected that metal-supported nanomaterials play an outstanding role not only in medical but also in other important areas.
  19. Ahmad A, Sattar MA, Rathore HA, Khan SA, Lazhari MI, Afzal S, et al.
    Indian J Pharmacol, 2015 May-Jun;47(3):243-7.
    PMID: 26069359 DOI: 10.4103/0253-7613.157106
    In the family of gas transmitters, hydrogen sulfide (H2S) is yet not adequately researched. Known for its rotten egg smell and adverse effects on the brain, lungs, and kidneys for more than 300 years, the vasorelaxant effects of H2S on blood vessel was first observed in 1997. Since then, research continued to explore the possible therapeutic effects of H2S in hypertension, inflammation, pancreatitis, different types of shock, diabetes, and heart failure. However, a considerable amount of efforts are yet needed to elucidate the mechanisms involved in the therapeutic effects of H2S, such as nitric oxide-dependent or independent vasodilation in hypertension and regression of left ventricular hypertrophy. More than a decade of good repute among researchers, H2S research has certain results that need to be clarified or reevaluated. H2S produces its response by multiple modes of action, such as opening the ATP-sensitive potassium channel, angiotensin-converting enzyme inhibition, and calcium channel blockade. H2S is endogenously produced from two sulfur-containing amino acids L-cysteine and L-methionine by the two enzymes cystathionine γ lyase and cystathionine β synthase. Recently, the third enzyme, 3-mercaptopyruvate sulfur transferase, along with cysteine aminotransferase, which is similar to aspartate aminotransferase, has been found to produce H2S in the brain. The H2S has interested researchers, and a great deal of information is being generated every year. This review aims to provide an update on the developments in the research of H2S in hypertension amid the ambiguity in defining the exact role of H2S in hypertension because of insufficient number of research results on this area. This critical review on the role of H2S in hypertension will clarify the gray areas and highlight its future prospects.
  20. Cheong NDH, Mohamed E, Haron N, Camalxaman SN, Abdullah A, Mohamad Yusof MI, et al.
    Med J Malaysia, 2024 Mar;79(Suppl 1):34-39.
    PMID: 38555883
    INTRODUCTION: Parkia speciosa Hassk., commonly known as bitter bean or twisted cluster bean, is a tropical leguminous plant species native to Southeast Asia. The plant's edible pods have been traditionally used in various cuisines, particularly in Malaysian, Thai, and Indonesian cooking. Apart from being used as a food ingredient, the pods of P. speciosa also have a range of potential applications in other fields, including medicine, agriculture, and industry. The pods are said to have several phytochemicals that hold great therapeutic values such as reducing inflammation, improving digestion, and lowering blood sugar levels. However, there is limited information on the specific phytochemical contents of the pods in the literature. Thus, the aim of this study is to quantify the total phenolic and flavonoid compounds and to determine the concentrations of four selected phytochemical compounds in the P. speciosa pod extract (PSPE).

    MATERIALS AND METHODS: Quantification of the total phenolic (TPC) and flavonoid contents (TFC) in PSPE were done via colourimetric methods; and the determination of the concentrations of four specific phytochemicals (gallic acid, caffeic acid, rutin, and quercetin) were done via High- Performance Liquid Chromatography (HPLC).

    RESULTS: Colourimetric determination of PSPE showed TPC and TFC values of 84.53±9.40 mg GAE/g and 11.96±4.51 mg QE/g, respectively. Additional analysis of the phytochemicals using HPLC revealed that there were 6.45±3.36 g/kg, 5.91±1.07 g/kg, 0.39±0.84 g/kg, and 0.19±0.47 g/kg of caffeic acid, gallic acid, rutin, and quercetin, respectively.

    CONCLUSION: The findings show that PSPE contains substantial amounts of caffeic acid, gallic acid, rutin, and quercetin, which may indicate its potential as antibacterial, anti-inflammatory, anti-lipid, and antiviral medicines.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links