Displaying publications 361 - 380 of 759 in total

Abstract:
Sort:
  1. Fulltext Egress modeling in performance based fire engineering design–fire safety study at NIOSH Tower
    Hari Krishnan Tamil Selvan, Raemy Md Zein, Mohd Abd Muiz Che Abd Aziz, Noorul Azreen Azis
    Journal of Occupational Safety and Health, 2015;12(1):41-44.
    MyJurnal
    Evacuation profile systems in high rise building are important to determine the safety level during any fire
    emergency. In relation to this, the study was conducted with its objective to develop the evacuation profile for
    NIOSH Tower. Evacnet-4 software was used to develop models for building evacuations using the building network
    descriptions and the initial content of the occupant at the beginning of the evacuation. The results show that it
    requires 390 seconds to evacuate NIOSH tower, with the highest number of bottlenecks recorded for the Third Floor.
    Identification of bottleneck is important to determine the evacuation periods. The information gained from the model
    may be used for the emergency response planning and for support material. The model should be tested in real time
    to have its reliability verified.
    Matched MeSH terms: Software
  2. Fulltext A New Random Walk for Replica Detection in WSNs
    Aalsalem MY, Khan WZ, Saad NM, Hossain MS, Atiquzzaman M, Khan MK
    PLoS One, 2016;11(7):e0158072.
    PMID: 27409082 DOI: 10.1371/journal.pone.0158072
    Wireless Sensor Networks (WSNs) are vulnerable to Node Replication attacks or Clone attacks. Among all the existing clone detection protocols in WSNs, RAWL shows the most promising results by employing Simple Random Walk (SRW). More recently, RAND outperforms RAWL by incorporating Network Division with SRW. Both RAND and RAWL have used SRW for random selection of witness nodes which is problematic because of frequently revisiting the previously passed nodes that leads to longer delays, high expenditures of energy with lower probability that witness nodes intersect. To circumvent this problem, we propose to employ a new kind of constrained random walk, namely Single Stage Memory Random Walk and present a distributed technique called SSRWND (Single Stage Memory Random Walk with Network Division). In SSRWND, single stage memory random walk is combined with network division aiming to decrease the communication and memory costs while keeping the detection probability higher. Through intensive simulations it is verified that SSRWND guarantees higher witness node security with moderate communication and memory overheads. SSRWND is expedient for security oriented application fields of WSNs like military and medical.
    Matched MeSH terms: Software
  3. Fulltext Validity and reliability of Vicon™ motion capture camera over the traditional anthropometric method
    Muhammad Fikri, Z., Ruzy Haryati, H., Seri Rahayu, K.
    Malaysian Journal of Public Health Medicine, 2018;18(102):142-151.
    MyJurnal
    Anthropometric study is one of the oldest branches of study in ergonomics where it serves a purpose in study of
    proportion and size for human body. One of the common methods used in anthropometric measurement is traditional
    measurement or direct measurement. However, Malaysia is still left behind other countries in development of national
    anthropometric database. Researchers in Malaysia are still relying on the traditional anthropometric (TA)
    measurement. There are several important factors that contribute to problems in TA such as accuracy, time, posture,
    identification of landmarks, instrument positions and orientations, and pressure exerted due to measuring equipment. In
    view of the fact that the difficulties of obtaining human anthropometry, it becomes necessary to propose a method which
    has less contact executed to respondent. This study aims to propose a new anthropometric measurement method using
    motion capture camera (MCC) method, later to develop the database for youth male population. A pilot test was done
    in order to confirm the measuring procedure as well as the flow of the study. Next, the Minitab statistical software used
    to check the validity and reliability of data using the tests of a) Accuracy-Pearson/Spearman Correlation b) BiasPaired
    T-Test c) Test-Retest Reliability-Pearson/Spearman Correlation d) Precision-Mean Absolute Difference and
    Relative Error Measurement. Results showed that the validity and reliability of this motion camera has successfully
    obtained and the anthropometric data for youth male respondents has successfully constructed. These findings can be
    used and expended to the national anthropometric database to be utilised in ergonomics design.
    Matched MeSH terms: Software
  4. Fulltext Ergonomic design optimization for train seat fit parameters
    Teo Chuun, B., Dian Darina Indah, D., Darliana, M.
    Malaysian Journal of Public Health Medicine, 2018;18(102):73-78.
    MyJurnal
    This study is aimed at seat design optimization for high-speed train based on the Malaysians sitting anthropometry
    data focusing on seat fit parameters. An analysis of anthropometry data composed of 15 dimensions that are
    required in seat design was done with 50 male subjects. These data were collected through direct measuring
    methods with standard equipment. According to the Malaysian automotive seat fit parameters, the backrest width,
    backrest height, cushion width, and cushion length were established based on these anthropometric dimensions:
    interscye breadth (5th percentile female and 95th percentile male), hip breadth (95th percentile female), sitting
    shoulder height (5th percentile female), and buttock-popliteal length (5th percentile female), respectively. This
    study uses the CATIA software to design and analyse the proposed seat design. The fit parameters proposed for the
    new design are seat height, 380mm; cushion width, 450mm; backrest width, 450mm and backrest height, 850mm.
    The CATIA human activity analysis (based on Rapid Upper Limb Analysis, RULA) was also executed. From the study,
    the new conceptual seat design gives the most optimized fit when compared to the current seat.
    Matched MeSH terms: Software
  5. Fulltext Preliminary prediction of lipase 3D protein structure and function in Rhodococcus sp. NAM81 using bioinformatics approach
    Hasdianty Abdullah, Mohd Fadzli Ahmad, Farah Aula Mohd Fauzi, Nor Suhaila Yaacob, Abdul Latif Ibrahim
    Bioremediation Science and Technology Research, 2015;3(1):11-15.
    MyJurnal
    Protein function depends greatly on its structure. Based on this principle, it is vital to study the
    protein structure in order to understand its function. This study attempts to build the predicted
    model of lipase gene in Rhodococcus sp. NAM81 using homology modelling method. The
    predicted structure was then used to investigate the function of protein through several
    bioinformatic tools. The DNA sequence of lipase gene was obtained from the Rhodococcus sp.
    NAM81 genome scaffold. Blastx analysis showed 100% identity to the target enzyme andthe
    appropriate template for homology modelling was determined using Blastp analysis. The 3D
    protein structure was built using two homology modelling software, EsyPred3D and Swiss
    Model Server. Both structures built obtained LGScore of greater than 4, which means they are
    extremely good models according to ProQ validation criteria. Both structures also satisfied the
    Ramachandran plot structure validation analysis. The predicted structures were 100% matched
    with each other when superimposed with DaliLite pairwise. This shows that both structure
    validation servers agreed on the same model. Structure analysis using ProFunc had found seven
    motifs and active sites that indicate similar function of this protein with other known proteins.
    Thus, this study has successfully produced a good 3D protein structure for the target enzyme.
    Matched MeSH terms: Software
  6. Fulltext Lumbar Spinal Stenosis: The Reliability, Sensitivity and Specificity of the Nerve Root Sedimentation Sign
    Yusof MI, Azizan AF, Abdullah MS
    Malays Orthop J, 2018 Jul;12(2):1-6.
    PMID: 30112121 MyJurnal DOI: 10.5704/MOJ.1807.001
    Introduction: This study is to evaluate the reliability, sensitivity and specificity of nerve root sedimentation sign (NRS) in our populations. The NRS is a radiological sign to diagnose lumbar spinal stenosis (LSS). It is claimed to be reliable with high sensitivity and specificity. Materials and Methods: A total of 82 MRI images from 43 patients in Group A (LSS) and 39 patients in Group B (non LSS) were analysed and compared for the presence of the NRS sign. Two assessors were used to evaluate intra and inter-assessor reliability of this sign based on 56 (33 patients, Group A and 23 patients, Group B). The findings were statistically analysed using SPSS software. Results: There was a significant association between spinal claudication and leg numbness with LSS (p<0.001 and Kappa=0.857, p<0.001). The inter-assessor reliability was also good (Kappa of 0.786, p<0.001). Conclusion: The NRS sign has high sensitivity and specificity for diagnosing LSS. The sign also has good intra and inter-assessor reliability.
    Matched MeSH terms: Software
  7. Quality control in dual head gamma-cameras: Comparison between methods and software used for image analysis
    Edam AN, Fornasier MR, De Denaro M, Sulieman A, Alkhorayef M, Bradley DA
    Appl Radiat Isot, 2018 Nov;141:288-291.
    PMID: 30122471 DOI: 10.1016/j.apradiso.2018.07.027
    Patient radiation dose and image quality are primary issues in the conduct of nuclear medicine (NM) procedures. A range of protocols are currently used in image acquisition and analysis of quality control (QC) tests, with National Electrical Manufacturers Association (NEMA) methods and protocols widely accepted in providing an accurate description, measurement and report of γ-camera performance parameters. However, no standard software is available for image analysis. Present study compares vendor QC software analysis and three types of software freely downloadable from the internet: NMQC, NM Toolkit and ImageJ-NM Toolkit software. These were used for image analysis of QC tests of γ-cameras based on NEMA protocols including non-uniformity evaluation. Ten non-uniformity QC images were obtained using a dual head γ-camera installed in Trieste General Hospital and then analyzed. Excel analysis was used as the baseline calculation for the non-uniformity test according to NEMA procedures. The results of non-uniformity analysis showed good agreement between the independent types of software and Excel calculations (the average differences were 0.3%, 2.9%, 1.3% and 1.6% for the Useful Field of View (UFOV) integral, UFOV differential, Central Field of View (CFOV) integral and CFOV differential, respectively), while significant differences were detected following analysis using the company QC software when compared with Excel analysis (the average differences were 14.6%, 20.7%, 25.7% and 31.9% for the UFOV integral, UFOV differential, CFOV integral and CFOV differential, respectively). Compared to use of Excel calculations use of NMQC software was found to be in close accord. Variation in results obtained using the three types of software and γ-camera QC software was due to the use of different pixel sizes. It is important to conduct independent analyses tests in addition to using the vendor QC software in order to determine the differences between values.
    Matched MeSH terms: Software
  8. Fulltext Assessment of the success rate of endodontically treated patients attending outpatient polyclinic
    Mustafa NS, Kashmoola MA, Majeed KRA, Qader OAJA
    Eur J Dent, 2018 10 30;12(4):540-545.
    PMID: 30369800 DOI: 10.4103/ejd.ejd_377_17
    Objectives: The aim of this study is to determine the success rate of the endodontically treated teeth in patients attending the Polyclinic, Kulliyyah of Dentistry, International Islamic University Malaysia (IIUM), from 2012 to 2015.

    Materials and Methods: A retrospective study involved endodontically treated teeth of patients attending the Polyclinic, Kulliyyah of Dentistry, IIUM, from 2012 to 2015. Clinical and radiographic data were recorded and classified as successful or failed, and further analyzed by Fisher's exact test to measure the correlation between the variables using SPSS software version 16.0. Kappa test was used to measure the overall relationship between clinical and radiographic findings.

    Results: A total of sixty teeth were evaluated clinically and radiographically, the overall success rate was 85% (n = 51). Correlation between the variables showed nonsignificant (P > 0.05) in the success rate among age, gender, and race, upper and lower arches and between anterior and posterior teeth at the time of treatment. At postendodontic fixed restorations, the variables showed statistically significant relationship with the success rate (P < 0.05).

    Conclusions: Patients with no signs and symptoms and with no radiographical changes at the the time of clinical examination, showed the highest percentage of success rate (85%) of postendodontic fixed restorations. Age, gender, and race have no significant relations with the success rate of endodontically treated teeth.

    Matched MeSH terms: Software
  9. Functional Genomics
    Goh HH, Ng CL, Loke KK
    Adv Exp Med Biol, 2018 11 2;1102:11-30.
    PMID: 30382566 DOI: 10.1007/978-3-319-98758-3_2
    Functional genomics encompasses diverse disciplines in molecular biology and bioinformatics to comprehend the blueprint, regulation, and expression of genetic elements that define the physiology of an organism. The deluge of sequencing data in the postgenomics era has demanded the involvement of computer scientists and mathematicians to create algorithms, analytical software, and databases for the storage, curation, and analysis of biological big data. In this chapter, we discuss on the concept of functional genomics in the context of systems biology and provide examples of its application in human genetic disease studies, molecular crop improvement, and metagenomics for antibiotic discovery. An overview of transcriptomics workflow and experimental considerations is also introduced. Lastly, we present an in-house case study of transcriptomics analysis of an aromatic herbal plant to understand the effect of elicitation on the biosynthesis of volatile organic compounds.
    Matched MeSH terms: Software
  10. Fulltext Stress analysis of engine camshaft from light metal
    Sharuddin Mohd Dahuri, Nor Hakimah Ahmad Subri, Norashady Mohd Noor
    Journal of Engineering and Science Research, 2018;2(1):37-44.
    MyJurnal
    his paper presents the structure and static model of engine camshaft analysis. For the purposes of this analysis, the finite element method is used. Camshaft is one of the critical components for effective and precise work of internal combustion engines. This camshaft rotates at high speed causing pressure and vibration in the system. Camshafts are also subject to varying fatigue burden due to cam plunger contact. These precise values are required to be determined to prevent failure in the camshaft. The objective of the project is to model and to perform pressure analysis on the camshaft machine. In this project the standard engine cam shafts are modeled and analyzed using the CATIA V5R21 software respectively. This model is created by the basic requirements of the engine. It is done with an existing background, such as the power of acting on cam by means of a valve while running at maxi mum speed. Here the approach becomes fully CAE based. CAE - based approaches enrich Research and limit the time span. A study was conducted to predict the behavior of the different camshafts structure of the material using the finite three - dimensional pressure of the element. Four types of materials such as Steel, Titanium, Aluminum and Magnesium are taken into account. FEA Stress and maximum displacement decisions are calculated and compared to all of the above materials. The conclusion is to focus on the material suitable for the camshaft to reduce the maximum displacement and weight. Titanium materials become the best material for camshaft manufacturing based on analysis.
    Matched MeSH terms: Software
  11. Fulltext Knowledge, perceptions and barriers of blood donation among adults in Hospital Universiti Sains Malaysia
    Chin, Chee Kee, Dariah Mohd Yusoff, Kueh, Yee Cheng
    Malaysian Journal of Medical Research, 2018;2(1):1-9.
    MyJurnal
    Blood donation is important for lives saving and the need is unceasing. However, the shortage of blood supply
    is a common issue. While the public is the main source of blood donation, it is unknown whether they are
    aware about it. This study was carried out to determine the public's knowledge, perceptions and barriers
    towards blood donation. Atotal of 384 male and female respondents were conveniently selected to participate
    in this study. Data was collected through self-administered questionnaire and analyzed with SPSS software
    version 22.0. Most of the respondents (60.9%) had never donated blood but their knowledge towards blood
    donation was high (79.9%). Some misconceptions were indicated among respondents. Afraid of the needle
    prick, pain or discomfort were the top barriers among non-donors respondents (45.3%). The majority of the
    respondents believed that blood donation is a practice or selfless concern for the well-being of others (98.7%).
    A significant relationship was indicated between age and level of education with status of blood donation
    (p
    Matched MeSH terms: Software
  12. Fulltext Determinants of the willingness to participate in biobanking among Malaysian stakeholders in the Klang Valley
    Amin L, Hashim H, Mahadi Z, Ismail K
    BMC Med Res Methodol, 2018 12 05;18(1):163.
    PMID: 30518344 DOI: 10.1186/s12874-018-0619-2
    BACKGROUND: The demand in biobanking for the collection and maintenance of biological specimens and personal data from civilians to improve the prevention, diagnosis and treatment of diseases has increased notably. Despite the advancement, certain issues, specifically those related to privacy and data protection, have been critically discussed. The purposes of this study are to assess the willingness of stakeholders to participate in biobanking and to determine its predictors.

    METHODS: A survey of 469 respondents from various stakeholder groups in the Klang Valley region of Malaysia was carried out. Based on previous research, a multi-dimensional instrument measuring willingness to participate in biobanking, and its predictors, was constructed and validated. A single step Structural Equation Modelling was performed to analyse the measurements and structural model using the International Business Machines Corporation Software Package for Social Sciences, Analysis of Moment Structures (IBM SPSS Amos) version 20 with a maximum likelihood function.

    RESULTS: Malaysian stakeholders in the Klang Valley were found to be cautious of biobanks. Although they perceived the biobanks as moderately beneficial (mean score of 4.65) and were moderately willing to participate in biobanking (mean score of 4.10), they professed moderate concern about data and specimen protection issues (mean score of 4.33). Willingness to participate in biobanking was predominantly determined by four direct predictors: specific application-linked perceptions of their benefits (β = 0.35, p 
    Matched MeSH terms: Software
  13. Fulltext A low-loss and compact single-layer butler matrix for a 5G base station antenna
    Idrus II, Abdul Latef T, Aridas NK, Abu Talip MS, Yamada Y, Abd Rahman T, et al.
    PLoS One, 2019;14(12):e0226499.
    PMID: 31841536 DOI: 10.1371/journal.pone.0226499
    Researchers are increasingly showing interest in the application of a Butler matrix for fifth-generation (5G) base station antennas. However, the design of the Butler matrix is challenging at millimeter wave because of the very small wavelength. The literature has reported issues of high insertion losses and incorrect output phases at the output ports of the Butler matrix, which affects the radiation characteristics. To overcome these issues, the circuit elements of the Butler matrix such as the crossover, the quadrature hybrid and the phase shifter must be designed using highly accurate dimensions. This paper presents a low-loss and compact single-layer 8 × 8 Butler matrix operating at 28 GHz. The optimum design of each circuit element is also demonstrated in detail. The designed Butler matrix was fabricated to validate the simulated results. The measured results showed return losses of less than -10 dB at 28 GHz. The proposed Butler matrix achieved a low insertion loss and a low phase error of ± 2 dB and ± 10°, respectively. In sum, this work obtained a good agreement between the simulated and measured results.
    Matched MeSH terms: Software
  14. Fulltext Dataset on microstructural characteristics and mechanical performance of homogeneous and functionally graded fibrous scaffolds
    Khoo W, Chung SM, Lim SC, Low CY, Shapiro JM, Koh CT
    Data Brief, 2019 Dec;27:104718.
    PMID: 31763388 DOI: 10.1016/j.dib.2019.104718
    Data in this article are supplementary to the corresponding research article [1]. Morphological features of homogeneous and graded nanofibrous electrospun gelatin scaffolds were observed using scanning electron microscopy. Microstructural properties including fiber diameter and pore size were determined via image analysis, using ImageJ. Uniaxial tensile and fracture tests were performed on both homogeneous and graded scaffolds using a universal testing machine. Stress-strain curves of all scaffolds are presented. Computing software, MATLAB, was used to design fibrous networks with thickness-dependent density and alignment gradients (DAG). Finite element analysis software, Abaqus, was used to determine the effect of the number of layers on the fracture properties of DAG multilayer scaffolds.
    Matched MeSH terms: Software
  15. Enhancing the three-dimensional visualization of a foreign object using Mimics software
    Asif MK, Nambiar P, Khan IM, Aziz ZABCA, Noor NSBM, Shanmuhasuntharam P, et al.
    Radiol Case Rep, 2019 Dec;14(12):1545-1549.
    PMID: 31719943 DOI: 10.1016/j.radcr.2019.10.001
    A patient was referred to the Oral and Maxillofacial Imaging Division and the attending dental specialist suspected a foreign object at the anterior region of the maxilla. The region was scanned using Kodak 9000 3D cone-beam computed tomography (CBCT) extraoral imaging system (Carestream Health, Inc.) to determine the type and morphometric characteristic of foreign object. The CBCT images failed to determine the identity and nature of the foreign object. CBCT images were then exported to the Materialise Interactive Medical Image Control System (Mimics) software to evaluate whether this software can help in enhancing the visualization of the foreign object in the maxillofacial region. The findings showed that there was an improved visualization of the foreign body and the type of the object could be determined with certainty. The object was identified as an endodontic file and was clearly visible when visualized as a reconstructed 3D model in Mimics software. Although the identification of abnormalities has been dramatically improved using 3D scans, the visualization can be further enhanced using image processing software like Mimics.
    Matched MeSH terms: Software
  16. Correlation data of (Z)-1-[4-(trifluoromethyl)benzylidene]thiosemicarbazide via spectroscopic methods and Density Functional Theory studies
    Osman UM, Farizal ASN, Kadir MA, Razali MH, Rozaini MZH, Arshad S
    Data Brief, 2019 Dec;27:104673.
    PMID: 31720328 DOI: 10.1016/j.dib.2019.104673
    New compound, namely (Z)-1-[4-(trifluoromethyl)benzylidene]thiosemicarbazide was successfully synthesized using thiosemicarbazide with 4-(trifluoromethyl)-benzaldehyde in ethanol solution. The data presented in this articles is related to our research articles entitled "Crystal Structure of (Z)-1-[4-(Trifluoromethyl)benzylidene]thiosemicarbazide" (Osman et al., 2017) [1]. This work shows the continue data from experimental spectroscopic measurement which are Fourier Transform Infrared (FTIR) and 13C Nuclear Magnetic Resonance (13C NMR). Assessment on the correlation with theoretical computational data was also carried out through GaussView 5.0.9 and Gaussian09 software. Molecular Electrostatic Potential (MEP) and Highest Occupied Molecular Orbital-Lowest Unoccupied Molecular Orbital (HOMO-LUMO) were also illustrated.
    Matched MeSH terms: Software
  17. Application of a simple mono window land surface temperature algorithm from Landsat ETM+ over Al Qassim, Saudi Arabia
    Lim H, Mat Jafri M, Abdullah K, Sultan Alsultan
    Sains Malaysiana, 2012;41:841-846.
    This study was conducted to retrieve the land surface temperature (LST) from Landsat ETM+ data for Al Qassim, Saudi Arabia. The proposed technique employed a mono window LST algorithm for retrieving surface temperature from Landsat ETM+. The land surface emissivity and solar angle values were needed in order to apply these in the proposed algorithm. The surface emissivity values were computed based on the NDVI values. The LST values derived from ATCOR2_T in the PCI Geomatica image processing software was used for algorithm calibration. The results showed a high correlation
    coefficient (R) and low root-mean-square error (RMS) between the LST values retrieved from the proposed algorithm and ATCOR2_T. This study indicated that the proposed algorithm is capable of retrieving accurate LST values and the derived information can be used in the environmental impact assessment for Al Qassim area.
    Matched MeSH terms: Software
  18. Molecular characterization of Malaysian marine fish species using partial sequence of mitochondrial DNA 12S and 16S rRNA markers
    Nur Haslindawaty Abd Rashid, Siti Farah Quraisha, Sundararajulu Panneerchelvam, Zafarina Zainuddin
    Sains Malaysiana, 2015;44:1119-1123.
    This study was conducted to characterize the selected marine fish species using partial sequence of mtDNA 12S and 16S rRNA gene. PCR amplification of 12S and 16S rRNA generated PCR amplicons at 350 and 440 bp lengths, respectively. Sequence analysis was performed using BioEdit software. Phylogenetic tree was constructed using MEGA software. Two reference species have been used namely Gobio gobio (AB239596 and EF112528) and Pentapodus caninus (DQ533268 and DQ532933). Based on the result obtained, mtDNA 12S and 16S rRNA were found to be useful as molecular markers for fish species identification. These markers will provide correct identification of fish species when considered along with morphological characteristics.
    Matched MeSH terms: Software
  19. Fulltext Allah’s wondrous creatures, the holy Qur’an and technological inventions: ultrasound imaging
    Sayed, Inayatullah Shah
    International Medical Journal Malaysia, 2018;17(101):83-88.
    MyJurnal
    Allah (s.w.t) has created innumerable distinct creatures and mentioned to us about their special qualities through His revelation. The Qur’an is the ultimate source of guidance for its followers for all aspects of life including science. If one is to study nature scientifically there are countless observable facts that are parallel to the teachings of Islam. One of these facts is echolocation found in bats and dolphins. These animals generate ultrasonic signals and detect the echoes reflected back to them to map out their environment and catch prey. Modern health sciences have already adopted this phenomenon in the form of ultrasound imaging for diagnosis of certain diseases. However, there is room for improvement in the overall performance of this technique. This article highlights the technological developments directly inspired by nature i.e., crawfish/crayfish and relates echolocation characteristics of bats and dolphins with basic principles of ultrasound imaging. In-depth studies on the echolocation properties of these creatures can lead to further improvement in the current ultrasound imaging technique. Such as; the construction of a transducer which simultaneously generates multi-frequency ultrasound signals and development of new interpreting software. Moreover, reading verses of the Holy Qur’an heartily and enthusiastically will lead to the development of innovative ideas that can be translated into reality and applied for the betterment of humankind.
    Matched MeSH terms: Software
  20. Response surface methodology models of processing parameters for high performance phenolic compreg wood
    Zaidon A, Kim G, Bakar E, Rasmina H
    Sains Malaysiana, 2014;43:775-782.
    The aim of the study was to develop response surface methodology (RSM) models for polymer loading, density, dimensional stability, strength and stiffness of compressed wood of sesenduk (Endospermum diadenum) treated with phenol formaldehyde (PF). Central composite design (CCD) using RSM with three processing parameters was studied in their specific ranges: PF concentration (PC) from 24-40%, pre-curing time (PCT), 3-9 h and compression ratio (CR), 70-90%. The experimental design was analysed and interpreted using the Design Expert Software (Stat Ease version 8) and the responses of 3d plots were built using the same software. Quadratic models in terms of PC, PCT and CR were developed for polymer loading, density, reduction in water absorption and modulus of rupture in static bending. Multiple linear equations were developed for anti-swelling efficiency and modulus of elasticity. The experimental values were in good agreement with predicted ones and the models were highly significant with correlation coefficients between 0.626 and 0.926. PC and CR had significant effects on the responses. The range of PCT used did not significantly affect the responses. It was also found that the improvement of properties ranged from moderately to highly correlated with the polymer loading in the compreg wood.
    Matched MeSH terms: Software Design
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links