Displaying publications 21 - 40 of 76 in total

Abstract:
Sort:
  1. Nor Muhammad NA, Ramlee IA, Mohd Nor D, Satyavenathan MV, Rahmat NL, Awang A, et al.
    Data Brief, 2021 Feb;34:106638.
    PMID: 33365368 DOI: 10.1016/j.dib.2020.106638
    Cocoa bean (Theobroma cacao L.) is part of the global cocoa and chocolate industry valued at 44 billion US dollars in 2019. Cocoa pod borer (CPB), Conopomorpha cramerella is a major pest of cocoa in Malaysia and Indonesia that is responsible for the decline for cocoa production. They have been detected since 1980s. Unfortunately, current control strategies are inefficient for CPB management. Although biotechnological alternatives, including RNA interference (RNAi), have been proposed in recent years to control insect pests, characterizing the genetics of the target pest is essential for successful application of these emerging technologies. We generated a comprehensive RNA-seq dataset (135,915,430 clean reads) for larva and adult stages of CPB by using the Illumina HiseqTM 4000 system to increase the understanding of CPB in relation to molecular features. The CPB transcriptome was assembled de novo and annotated. The final assembled produced 249,280 unigenes, of which 75,929 unigenes annotated against NCBI NR database and were distributed among 156 KEGG pathways. The raw data were uploaded to SRA database and the BioProject ID is PRJNA553611. The transcriptomic dataset we present are the first reports of transcriptome information in CPB that is valuable for further exploration and understanding of CPB molecular pathways.
    Matched MeSH terms: Cacao
  2. Hazirah, A.R., Abdah, M.A., Zainal, B.
    Malays J Nutr, 2013;19(2):223-232.
    MyJurnal
    Introduction: Cancer chemopreventive agents from natural sources have been actively investigated over the years to seek prevention against cancer. In this study, cocoa polyphenols extract (CPE) was examined to explore its antioxidant and cytotoxicity activities. Methods: CPE was analysed for total phenolic content (TPC) and antioxidant activity (DPPH radical scavenging activity and FRAP ferric-reducing antioxidant power assays). In vitro cytotoxicity effect of CPE
    against HepG2, HT-29, HeLa, MCF-7, MDA-MB-231 and WRL-68 cell lines after 48 h exposure was measured by MTT assay. Results: The study showed that CPE had higher total phenolic content (13560.0±420.1 mg GAE/100g dry weight of sample) than vitamin E (p
    Matched MeSH terms: Cacao
  3. Asep EK, Jinap S, Russly AR, Jahurul MH, Ghafoor K, Zaidul IS
    J Food Sci Technol, 2016 May;53(5):2287-97.
    PMID: 27407195 DOI: 10.1007/s13197-016-2191-2
    The effects of flow rate, different pressures and temperatures on cocoa butter extracted from cocoa nib using supercritical carbon dioxide (scCO2) were investigated. The yield was analyzed for total fat content, triacylglycerol (TG) profile, and fatty acid (FA) profile. Extractions were carried out at pressures of 20 and 35 MPa, temperatures of 50 and 60 °C, and CO2 flow rates of 0.5, 1, 2, 4 mL min(-1). The result shows that the yield of cocoa butter extract increased with increasing pressure, temperature, and flow rate and the optimum conditions for the maximum cocoa butter extraction were 35 MPa, 60 °C and 2 mL min(-1), repectively. TGs and FAs were found to be similar in composition to those of cocoa butter obtained by conventional methods. The lower molecular weight TGs and FAs showed higher selectivity compared to higher molecular weight TGs and FAs.
    Matched MeSH terms: Cacao
  4. Syafiq, A., Amir, I.Z., Sharon, W.X.R.
    MyJurnal
    The impacts on both rheological parameters; Casson yield stress and Casson viscosity were determined. The interactions among blend’s components; xanthan gum (XG), corn starch (CS), glycerin (GL) and their relationship with both flow parameters were also investigated by using D-Optimal mixture design. Three levels of cocoa butter substitution assigned in chocolate production were at 5%, 10% and 15% level with random proportions of each component generated by Design Expert software. An appropriate mathematical model was applied to evaluate each response as a function of the proportions of the components enabling in prediction of future response by using any blend of components. As the incorporation of the blends (XG/CS/GL) in chocolate production was elevated from 5% to 15%, both parameters; viscosity and yield stress of chocolate were gradually increased, as in range 7.819 to 10.529 Pa, and 2.372 to 3.727 Pa.s, respectively. Neither binary nor ternary component-component interaction exhibited synergistic effect. Nevertheless, strongest antagonistic effect on both rheological parameters of substituted chocolate at 5% level and 10% level were respectively observed at ternary interaction region for the former, and at binary interaction area of CS:GL, closer to CS corner as for the latter. This study somehow provides ideas on how component-component interactions influence experimented response.
    Matched MeSH terms: Cacao
  5. Zzaman, W., Issara, U., Febrianto, N.F., Yang, T.A.
    International Food Research Journal, 2014;21(3):10191-1023.
    MyJurnal
    The study was conducted to investigate fatty acid composition, rheological properties and crystal formation of rambutan fat and cocoa butter. The results showed that lauric acid, palmitic acid, and stearic fatty acid in rambutan fat were less than cocoa butter, but oleic acid found almost the same. The crystal formation of cocoa butter was not complex at 25oC, while rambutan fat and their mixture shown complicated network of crystal form. The Newton, Bingham and Casson plastic rheological models was used to describe fat flow in this experiment and the result showed that rambutan fat had higher viscosity than cocoa fat. Based on the results the study recommended that mixture proportion up to 30% rambutan seed fat can be used as a cocoa butter substitute whereas higher proportion completely alters original cocoa butter properties. Therefore, there is feasibility of using the rambutan fat to substitute cocoa butter and the mixtures of the two fats in suitable proportion in chocolate manufacturing.
    Matched MeSH terms: Cacao
  6. Mohd Helmy Ibrahim, Mohd Nazip Suratman, Razali Abd Kader
    MyJurnal
    Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G.sepium at three intervals according to age groups (three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years of age as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p0.05). Mean moisture content was 58.3 % with no significant difference existing between the tree age groups. fibre diameter (22.4 m) was significantly lower (p0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 m and 24.7 m), respectively. Means of fibre length, lumen diameter and cell wall thickness was 0.83 m, 18.3 m, and 6.2 m, respectively, with no significant differences detected between trees in all age groups in this study. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G. sepium may have the potential for insulation board manufacture and paper making. However, future studies should experiment the utilization of this species for these products to determine its full potential.
    Matched MeSH terms: Cacao
  7. Issara, U., Zzaman, W., Yang, T.A.
    MyJurnal
    This review of literature provides an overview on the compositional data of Rambutan (Nephelium lappaceum Linn.) and rambutan seed fat for usage in chocolate product. It is a seasonal fruit native of west Malaysia and Sumatra. It is harvested when the fruit have reached optimum visual and organoleptic quality. Rambutans rapidly deteriorate unless proper handling techniques are employed. The rambutan fruits are deseeded during processing and these seeds (~ 4-9 g/100 g) are a waste by-product of the canning industry. And some studies was showed that rambutan seed possesses a relatively high amount of fat and these fats are similar to those of cocoa fat, although have some different physical properties. In the present research about rambutan seed fat continued increasing due to from previous research was found that this fat can use as substitute in cocoa butter for chocolate products. Therefore, the extracted fat from rambutan seed not only could be used for manufacturing candles, soaps, and fuels, but it also has a possible to be a source of natural edible fat with feasible industry use.
    Matched MeSH terms: Cacao
  8. Amir, I.Z., Sharon, W.X.R., Syafiq, A.
    MyJurnal
    Impacts and relationships on physicochemical properties in dark chocolate produced from different substitution for cocoa butter by Xanthan gum (XG) and Guar gum (GG) blends were determined using D-optimal mixture design. This study involved three levels of substitution which are 5%, 10% and 15% with constrained cocoa butter content and random blend of gums. Linear design models were applied to analyze parameters including texture (hardness) measurement and melting profile of fat crystal. Products experienced undesirable raises of hardness jointly with the increment of gums incorporation across the level of cocoa butter replacement from 5% to 15%. Similar trend was also agreed with the melting behavior of products as their melting point increased with the gradual diminution of cocoa butter. After all, the replacement of cocoa butter using hydrocolloids was deemed possible as there were products whose melting point and hardness fell in the acceptable range.
    Matched MeSH terms: Cacao
  9. Tan CS, Billa N, Roberts CJ, Scurr DJ
    Nanomaterials (Basel), 2014 Dec 19;4(4):905-916.
    PMID: 28344257 DOI: 10.3390/nano4040905
    An amphotericin B-containing (AmB) solid lipid nanoparticulate drug delivery system intended for oral administration, comprised of bee's wax and theobroma oil as lipid components was formulated with the aim to ascertain the location of AmB within the lipid matrix: (a) a homogenous matrix; (b) a drug-enriched shell; or (c) a drug enriched core. Both the drug-loaded and drug-free nanoparticles were spherical with AmB contributing to an increase in both the z-average diameter (169 ± 1 to 222 ± 2 nm) and zeta potential (40.8 ± 0.9 to 50.3 ± 1.0 mV) of the nanoparticles. A maximum encapsulation efficiency of 21.4% ± 3.0%, corresponding to 10.7 ± 0.4 mg encapsulated AmB within the lipid matrix was observed. Surface analysis and electron microscopic imaging indicated that AmB was dispersed uniformly within the lipid matrix (option (a) above) and, therefore, this is the most suitable of the three models with regard to modeling the propensity for uptake by epithelia and release of AmB in lymph.
    Matched MeSH terms: Cacao
  10. Roiaini, M., Norhayati, H., Seyed, H.M., Jinap, S.
    MyJurnal
    Cocoa beans are rich in numbers of beneficial bioactive compounds such as phenolics and
    phytosterols, which benefits to human being. The suitable extraction method is needed to
    produce high quality and quantity of cocoa butter and other bioactive compounds. There are
    many extraction method to extract these compounds such as Soxhlet extraction, supercritical
    fluid extraction, ultrasound extraction method and others. The objective of this study is to
    determine the effectiveness of the different extraction methods producing high yields of cocoa
    butter, lower oxidative value, stable phytosterols and antioxidant content. The cocoa beans were
    subjected to different extraction methods such as Soxhlet extraction (SE), Ultrasonic extraction
    method (USE), Supercritical carbon dioxide (SCO2
    ) and Supercritical carbon dioxide with cosolvent
    (SCO2
    -Ethanol). Cocoa butter extracted using SCO2
    -Ethanol has significantly (p
    Matched MeSH terms: Cacao
  11. Tee YK, Balasundram SK, Ding P, M Hanif AH, Bariah K
    J Sci Food Agric, 2019 Mar 15;99(4):1700-1708.
    PMID: 30206959 DOI: 10.1002/jsfa.9359
    BACKGROUND: A series of fluorescence indices (anthocyanin, flavonol, chlorophyll and nitrogen balance) were deployed to detect the pigments and colourless flavonoids in cacao pods of three commercial cacao (Theobroma cacao L.) genotypes (QH1003, KKM22 and MCBC1) using a fast and non-destructive multiparametric fluorescence sensor. The aim was to determine optimum harvest periods (either 4 or 5 months after pod emergence) of commercial cacao based on fluorescence indices of cacao development and bean quality.

    RESULTS: As pod developed, cacao exhibited a rise with the peak of flavonol occurring at months 4 and 5 after pod maturity was initiated while nitrogen balance showed a decreasing trend during maturity. Cacao pods contained high chlorophyll as they developed but chlorophyll content declined significantly on pods that ripened at month 5.

    CONCLUSION: Cacao pods harvested at months 4 and 5 can be considered as commercially-ready as the beans have developed good quality and comply with the Malaysian standard on cacao bean specification. Thus, cacao pods can be harvested earlier when they reach maturity at month 4 after pod emergence to avoid germinated beans and over fermentation in ripe pods harvested at month 5. © 2018 Society of Chemical Industry.

    Matched MeSH terms: Cacao
  12. Chai KF, Chang LS, Adzahan NM, Karim R, Rukayadi Y, Ghazali HM
    Food Chem, 2019 Jan 15;271:298-308.
    PMID: 30236681 DOI: 10.1016/j.foodchem.2018.07.155
    A novel way to fully utilize rambutan fruit and seed is to ferment peeled fruits followed by drying and roasting, and use the seeds to produce seed powder similar to that of cocoa powder. Hence, the objective of this study was to optimize the roasting time and temperature of rambutan fruit post-fermentation and drying, and to produce a cocoa-like powder product from the seeds. Parameters monitored during roasting were colour and total phenolic content, while seed powder obtained using optimized roasting conditions was analyzed for its physicochemical properties and toxicity. The latter was examined using the brine shrimp lethality assay. Results showed that the roasted seed powder possessed colour and key volatile compounds similar to that of cocoa powder. Besides, the brine shrimp lethality assay indicated that the roasted seed powder was non-toxic. Thus, the fruit, including its seed could be fully utilized and subsequently, wastage could be reduced.
    Matched MeSH terms: Cacao
  13. Borhan FP, Abd Gani SS, Shamsuddin R
    ScientificWorldJournal, 2014;2014:173979.
    PMID: 25548777 DOI: 10.1155/2014/173979
    Okara, soybean waste from tofu and soymilk production, was utilised as a natural antioxidant in soap formulation for stratum corneum application. D-optimal mixture design was employed to investigate the influence of the main compositions of okara soap containing different fatty acid and oils (virgin coconut oil A (24-28% w/w), olive oil B (15-20% w/w), palm oil C (6-10% w/w), castor oil D (15-20% w/w), cocoa butter E (6-10% w/w), and okara F (2-7% w/w)) by saponification process on the response hardness of the soap. The experimental data were utilized to carry out analysis of variance (ANOVA) and to develop a polynomial regression model for okara soap hardness in terms of the six design factors considered in this study. Results revealed that the best mixture was the formulation that included 26.537% A, 19.999% B, 9.998% C, 16.241% D, 7.633% E, and 7.000% F. The results proved that the difference in the level of fatty acid and oils in the formulation significantly affects the hardness of soap. Depending on the desirable level of those six variables, creation of okara based soap with desirable properties better than those of commercial ones is possible.
    Matched MeSH terms: Cacao/chemistry
  14. Jahurul MH, Zaidul IS, Nik Norulaini NA, Sahena F, Abedin MZ, Mohamed A, et al.
    Food Chem, 2014 Jul 1;154:323-9.
    PMID: 24518349 DOI: 10.1016/j.foodchem.2013.11.098
    The blending effects of mango seed fat (MSF), extracted using supercritical fluid, and palm stearin (PS) to formulate hard cocoa butter replacers (CBRs), were investigated. The triglycerides (TG), thermal properties and solid fat content (SFC) of the formulated blends were determined using different chromatographic and thermal techniques. All the blends had three main TGs; namely, 1,3-dipalmitoyl-2-oleoylglycerol (POP) (8.6-17.7%), 1-palmitoyl-2-oleoyl-3-stearoyl-glycerol (POS) (12.6-19.6%), and 1,3-distearoyl-2-oleoyl-glycerol (SOS) (37.2-31.4%), with SOS being the major component. The melting peak temperatures gradually increased and shifted towards higher temperatures with PS. The crystallization onset temperatures increased, while the offset decreased with PS. The SFC did not drop to 0% at 37.5°C, which was shifted to 0% at and above 40°C for some blends. The studies revealed that CBRs could be prepared by blending MSF and PS, and they could be utilised by chocolate manufacturers in tropical countries.
    Matched MeSH terms: Cacao/chemistry
  15. Chan SY, Choo WS
    Food Chem, 2013 Dec 15;141(4):3752-8.
    PMID: 23993545 DOI: 10.1016/j.foodchem.2013.06.097
    Different extraction conditions were applied to investigate the effect of temperature, extraction time and substrate-extractant ratio on pectin extraction from cocoa husks. Pectin was extracted from cocoa husks using water, citric acid at pH 2.5 or 4.0, or hydrochloric acid at pH 2.5 or 4.0. Temperature, extraction time and substrate-extractant ratio affected the yields, uronic acid contents, degrees of methylation (DM) and degrees of acetylation (DA) of the extracted pectins using the five extractants differently. The yields and uronic acid contents of the extracted pectins ranged from 3.38-7.62% to 31.19-65.20%, respectively. The DM and DA of the extracted pectins ranged from 7.17-57.86% to 1.01-3.48%, respectively. The highest yield of pectin (7.62%) was obtained using citric acid at pH 2.5 [1:25 (w/v)] at 95 °C for 3.0 h. The highest uronic acid content (65.20%) in the pectin was obtained using water [1:25 (w/v)] at 95 °C for 3.0 h.
    Matched MeSH terms: Cacao/chemistry*
  16. Tee WF, Nazaruddin R, Tan YN, Ayob MK
    Food Sci Technol Int, 2014 Sep;20(6):399-404.
    PMID: 23774606 DOI: 10.1177/1082013213488775
    This study investigated the survival of encapsulated potential probiotic Lactobacillus plantarum which isolated from fermented cocoa beans. κ-Carrageenan was used to encapsulate the probiotic. Encapsulation techniques such as emulsification, freeze-drying or extrusion were adopted to encapsulate the probiotic. Freeze-drying and extrusion methods showed higher (p 
    Matched MeSH terms: Cacao/microbiology
  17. Chan CH, Yusoff R, Ngoh GC
    Food Chem, 2013 Sep 1;140(1-2):147-53.
    PMID: 23578626 DOI: 10.1016/j.foodchem.2013.02.057
    A modeling technique based on absorbed microwave energy was proposed to model microwave-assisted extraction (MAE) of antioxidant compounds from cocoa (Theobroma cacao L.) leaves. By adapting suitable extraction model at the basis of microwave energy absorbed during extraction, the model can be developed to predict extraction profile of MAE at various microwave irradiation power (100-600 W) and solvent loading (100-300 ml). Verification with experimental data confirmed that the prediction was accurate in capturing the extraction profile of MAE (R-square value greater than 0.87). Besides, the predicted yields from the model showed good agreement with the experimental results with less than 10% deviation observed. Furthermore, suitable extraction times to ensure high extraction yield at various MAE conditions can be estimated based on absorbed microwave energy. The estimation is feasible as more than 85% of active compounds can be extracted when compared with the conventional extraction technique.
    Matched MeSH terms: Cacao/chemistry*
  18. Abdul Karim A, Azlan A, Ismail A, Hashim P, Abd Gani SS, Zainudin BH, et al.
    J Cosmet Dermatol, 2016 Sep;15(3):283-95.
    PMID: 27041391 DOI: 10.1111/jocd.12218
    OBJECTIVE: Cocoa pods are abundant waste materials of cocoa plantation, which are usually discarded onto plantation floors. However, due to poor plantation management, the discarded cocoa pods can create suitable breeding ground for Phytophthora palmivora, which is regarded as the causal agent of the black pod disease. On the other hand, cocoa pods potentially contain antioxidant compounds. Antioxidant compounds are related to the protection of skin from wrinkles and can be used as functional cosmetic ingredients. Therefore, in this study, cocoa pods were extracted and to be used as active ingredients for antiwrinkles.

    METHODS: The active compounds in cocoa pod extracts (CPE) were screened using liquid chromatography-mass spectrometry (LC-MS). Fibroblast cells were used to determine the effective concentration of CPE to maintain the viability for at least 50% of the cells (EC50 ). The gel was tested by 12 panelists to determine the efficacy of CPE in gel form using Visioscan to reduce skin wrinkles and improve skin condition.

    RESULTS: CPE was detected to contain malic acid, procyanidin B1, rosmarinic acid, procyanidin C1, apigenin, and ellagic acid, all of which may contribute to functional cosmetic properties of CPE. The EC50 value of cocoa pod extracts was used to calculate the amount of CPE to be incorporated into gel so that the formulated product could reach an effective concentration of extract while being nonintoxicant to the skin cell. The results showed that CPE is potential ingredient to reduce wrinkles. Skin wrinkles reduced at 6.38 ± 1.23% with the application of the CPE gel within 3 weeks and significantly improved further (12.39 ± 1.59%) after 5 weeks. The skin hydration increased (3.181 ± 1.06%) after 3 weeks of the CPE gel application.

    CONCLUSION: Flavonoid compounds in CPE contributed to the functional cosmetic properties of CPE. The CPE which is nontoxic to skin cells help to reduce wrinkles on skin after 3 weeks of application. CPE can be used as the active ingredients in antiwrinkle products, and prolonged application may result in significant visual changes to the naked eyes.

    Matched MeSH terms: Cacao*
  19. Jinap S, Ali AA, Man YB, Suria AM
    Int J Food Sci Nutr, 2000 Nov;51(6):489-99.
    PMID: 11271851
    Dark chocolates filled with palm mid-fraction (PMF) were stored at different temperatures to evaluate the physical and chemical changes. Storage at low temperature (18 degrees C) reduces the PMF migration to negligible extent. Higher storage temperatures (30 and 35 degrees C) increased the PMF migration from the filling centre into the chocolate coating. As a consequence of fat migration, fatty acid composition, triglyceride composition, hardness, solid fat content, melting point and polymorphic structure changed, leading to bloom formation, which started by fat migration and was influenced by recrystallization tendency within the chocolate coating.
    Matched MeSH terms: Cacao/chemistry*
  20. Mohamed R, Zainudin BH, Yaakob AS
    Food Chem, 2020 Jan 15;303:125392.
    PMID: 31446362 DOI: 10.1016/j.foodchem.2019.125392
    In this article, an easy and quick method based on microwave assisted acid digestion technique prior to quantification using inductively coupled plasma mass spectrometry for the analysis of heavy metals in cocoa beans, cocoa powder and chocolate was established and validated for arsenic (As), cadmium (Cd), lead (Pb), and antimony (Sb). Limit of quantification for all elements were product dependent and varies from 7.84 to 194.52 µg/kg. The recoveries of the heavy metals at 250 and 1000 µg/kg spiking levels were ranged between 96.27-108.75%, 90.43-101.97% and 89.72-106.26% for cocoa beans, cocoa powder, and chocolate, respectively. Relative standard deviation values obtained were all below 20% and the expanded uncertainty measurements for the elements were less than 25%. The analysis of real samples found that the concentration level is far from the national alarming level except for cadmium in cocoa beans.
    Matched MeSH terms: Cacao/chemistry*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links