Displaying publications 21 - 40 of 1243 in total

Abstract:
Sort:
  1. Fulltext High Sensitivity pH Sensor Based on Porous Silicon (PSi) Extended Gate Field-Effect Transistor
    Al-Hardan NH, Abdul Hamid MA, Ahmed NM, Jalar A, Shamsudin R, Othman NK, et al.
    Sensors (Basel), 2016 Jun 07;16(6).
    PMID: 27338381 DOI: 10.3390/s16060839
    In this study, porous silicon (PSi) was prepared and tested as an extended gate field-effect transistor (EGFET) for pH sensing. The prepared PSi has pore sizes in the range of 500 to 750 nm with a depth of approximately 42 µm. The results of testing PSi for hydrogen ion sensing in different pH buffer solutions reveal that the PSi has a sensitivity value of 66 mV/pH that is considered a super Nernstian value. The sensor considers stability to be in the pH range of 2 to 12. The hysteresis values of the prepared PSi sensor were approximately 8.2 and 10.5 mV in the low and high pH loop, respectively. The result of this study reveals a promising application of PSi in the field for detecting hydrogen ions in different solutions.
    Matched MeSH terms: Hydrogen-Ion Concentration
  2. Flexural Properties of Contemporary Bioactive Restorative Materials: Effect of Environmental pH
    Ong J, Yap AU, Abdul Aziz A, Yahya NA
    Oper Dent, 2023 Jan 01;48(1):90-97.
    PMID: 36445974 DOI: 10.2341/21-202-L
    This study investigated the effects of environmental pH on the flexural properties of ion-releasing restorative materials (IRMs), including giomer (Beautifil-Bulk Restorative - BB), alkasite (Cention N - CN), bioactive composite (Activa - AB) and resin-modified glass ionomer (Riva Light Cure -RV) restoratives. A bio-inert resin-based composite (Filtek Bulk-fill Posterior - FB) served as the control. Stainless steel molds were used to fabricate 40 beam-shaped specimens (12mm × 2mm × 2mm) for each material. The specimens were finished, measured, and randomly distributed into four groups (n=10) and immersed in aqueous solutions of pH 3.0, pH 5.0, pH 6.8, and pH 10.0 at 37°C for 28 days. Specimens were then subjected to a uniaxial three-point bending flexural test with a load cell of 5 KN and a fixed deformation rate of 0.5 mm/min until fracture occurred. Flexural modulus and strength were statistically analyzed using analysis of variance/Dunnet T3's test (p=0.05). Mean flexural modulus varied from (2.40±0.41 to 9.65±1.21 GPa), while mean flexural strength ranged from (21.56±2.78 to 163.86±13.13 MPa). Significant differences in flexural properties were observed among the various pH values and materials. All materials immersed in artificial saliva (pH 6.8) presented the highest flexural properties, except AB. The flexural strength of AB was significantly better when exposed to acidic environments. FB had better flexural properties than IRMs after exposure to a range of environmental pH values.
    Matched MeSH terms: Hydrogen-Ion Concentration
  3. Dual (pH and thermal) stimuli-responsive Pickering emulsion stabilized by chitosan-carrageenan composite microgels
    Lim HP, Ng SD, Dasa DB, Adnan SA, Tey BT, Chan ES, et al.
    Int J Biol Macromol, 2023 Mar 31;232:123461.
    PMID: 36720328 DOI: 10.1016/j.ijbiomac.2023.123461
    Formulation of water-in-oil (W/O) Pickering emulsion (PE) for food applications has been largely restricted by the limited choices of food-grade Pickering emulsifiers. In this study, composite microgels made of chitosan and carrageenan were explored as a dual (pH and thermal) stimuli-responsive Pickering emulsifier for the stabilization of W/O PE. The chitosan-carrageenan (CS-CRG) composite microgels not only exhibited pH- and thermo-responsiveness, but also displayed enhanced lipophilicity as compared to the discrete polymers. The stability of the CS-CRG-stabilized W/O PE system (CS-CRG PE) was governed by CS:CRG mass ratio and oil fractions used. The CS-CRG PE remained stable at acidic pH and at temperatures below 40 °C. The instability of CS-CRG composite microgels at alkaline pH and at temperatures above 40 °C rendered the demulsification of CS-CRG PE. This stimuli-responsive W/O PE could unlock new opportunities for the development of stimuli-responsive W/O PE using food-grade materials.
    Matched MeSH terms: Hydrogen-Ion Concentration
  4. Fulltext Controlled assembly of superparamagnetic iron oxide nanoparticle into nanoliposome for Pickering emulsion preparation
    Sia CS, Tey BT, Goh BH, Low LE
    Colloids Surf B Biointerfaces, 2024 Sep;241:114051.
    PMID: 38954935 DOI: 10.1016/j.colsurfb.2024.114051
    There has been a surge in effort in the development of various solid nanoparticles as Pickering emulsion stabilizers in the past decades. Regardless, the exploration of stabilizers that simultaneously stabilize and deliver bioactive has been limited. For this, liposomes with amphiphilic nature have been introduced as Pickering emulsion stabilizers but these nano-sized vesicles lack targeting specificity. Therefore in this study, superparamagnetic iron oxide nanoparticles (SPION) encapsulated within liposomes (MLP) were used as Pickering emulsion stabilizers to prepare pH and magnetic-responsive Pickering emulsions. A stable MLP-stabilized Pickering emulsion formulation was established by varying the MLP pH, concentration, and oil loading during the emulsification process. The primary stabilization mechanism of the emulsion under pH variation was identified to be largely associated with the MLP phosphate group deprotonation. When subjected to sequential pH adjustment to imitate the gastrointestinal digestion pH environment, a recovery in Pickering emulsion integrity was observed as the pH changes from acidic to alkaline. By incorporating SPION, the Pickering emulsion can be guided to the targeted site under the influence of a magnetic field without compromising emulsion stability. Overall, the results demonstrated the potential of MLP-stabilized Pickering emulsion as a dual pH- and magnetic-responsive drug delivery carrier with the ability to co-encapsulate hydrophobic and hydrophilic bioactive.
    Matched MeSH terms: Hydrogen-Ion Concentration
  5. Assessing the impact of temperature, pH, light and chemical oxidation on fucoxanthin colour changes, antioxidant activity and the resulting metabolites
    Yusof Z, Lim V, Khong NMH, Choo WS, Foo SC
    J Sci Food Agric, 2025 Jan 15;105(1):93-108.
    PMID: 39177277 DOI: 10.1002/jsfa.13807
    BACKGROUND: The present study evaluated the effects of temperature, pH, light and chemical oxidation on fucoxanthin changes in terms of colour, antioxidant activity and metabolomic profile. Additionally, the correlation between antioxidant activity and identified metabolites was analysed.

    RESULTS: It was found that colour change was significantly reduced at elevated heat (100 °C, *∆E = 0.81 ± 0.05), reduced pH (pH 3, *∆E = 0.59 ± 0.04) and length of light exposure (*∆E = 3.16 ± 0.04). Antioxidant activity decreased under all treatments. Among the temperatures tested, fucoxanthin exhibited the highest activity at 60 °C, ranging from 0.92 to 3.04 mg Trolox equivalents (TE) g-1. Significant activity reductions (P 

    Matched MeSH terms: Hydrogen-Ion Concentration
  6. Thermal degradation kinetics and purification of C-phycocyanin from thermophilic and mesophilic cyanobacteria
    Chittapun S, Suwanmanee K, Kongsinkaew C, Pornpukdeewattana S, Chisti Y, Charoenrat T
    J Biotechnol, 2025 Feb;398:76-86.
    PMID: 39617332 DOI: 10.1016/j.jbiotec.2024.11.018
    The natural blue colorant C-phycocyanin (C-PC) has many potential applications but its poor heat stability limits its commercial use. This study compares the production and thermal stability of C-PC from two cyanobacteria: the thermophilic Thermosynechococcus sp. TUBT-T01 and the mesophilic Synechococcus cedrorum TISTR8589. Thermosynechococcus sp. produced nearly 1.9-fold more C-PC than S. cedrorum. Batch adsorption using a chromatographic cationic ion exchange resin (Streamline Direct HST1) was used to effectively purify the C-PC. The equilibrium adsorption capacity (Qeq) of the resin for C-PC was the highest at pH 5. At this pH, the Qeq for the thermophilic C-PC was 5.5 ± 0.1 mg mL⁻¹ , whereas for the mesophilic C-PC it was 1.5 ± 0.2 mg mL⁻¹ . Purification increased the concentration of the thermophilic C-PC by 5.9-fold, and that of mesophilic C-PC by 4.2-fold. The purity ratios of the final products from the two cyanobacteria were similar at ∼2.2. At 60 °C and pH 7, the C-PC of Thermosynechococcus sp. had ∼12-times longer half-life than the mesophilic C-PC; however, the productivity of the thermophilic C-PC was comparatively low because of a low biomass productivity of Thermosynechococcus sp.
    Matched MeSH terms: Hydrogen-Ion Concentration
  7. Fulltext Isolation and characterization of bacteriophage against clinical isolates of AmpC beta lactamase-Producing Klebsiella pneumoniae from hospital wastewater
    Abusalah MAHA, Abusalah MAHA, Yean Yean C, Aziah I, Zaidah AR
    PLoS One, 2025;20(2):e0315079.
    PMID: 39982880 DOI: 10.1371/journal.pone.0315079
    BACKGROUND: The increasing incidence of AmpC β-lactamase producing by K. pneumoniae has raised global alarm. Consequently, there is a crucial need for effective methods to inactivate pathogenic bacteria and mitigate the associated risks. Bacteriophage therapy has been demonstrated to be an effective and alternative approach for targeting and inactivating K. pneumoniae that produces AmpC. This study aimed to isolate and characterize the Klebsiella pneumoniae AmpC-specific phages from hospital wastewater.

    METHODS: The hospital wastewater samples were collected from the sewage water effluent of a tertiary hospital at Universiti Sains Malaysia, located on the east coast of Malaysia. These samples underwent serial filtration and centrifugation processes for phage recovery. The phage solutions were undergoing a screening test by spot assay using clinical isolates of Klebsiella pneumoniae AmpC strain as amplification hosts. The isolated AmpC-phages were further studied and characterised to determine the phage's host range, temperature, pH, and chloroform stabilities. High-Resolution Transmission Electron Microscopy (HRTEM) was performed to determine the phage type.

    RESULTS: Thirty HWW samples were analyzed using four K. pneumoniae AmpC strains resulting in a total of 120 screening plates. The AmpC-Klebsiella pneumoniae (AmpC-KP) phages were detected in 31.70% (38/120) of the plates. The AmpC-KP phages had lytic diameters ranging from 1-3 mm, and a phage titer ranged from4×103-3.2×107 PFU/ml. The phages had a narrow-host range stable at a temperature range from -20-50˚C. The phages were also stable at pH ranging from 4 to 9 and at different concentrations of chloroform (5%,10%). Based on HRTEM, Siphoviridea was identified.

    CONCLUSIONS: The AmpC-phages were abundant in hospital wastewater, and HWW was a good source for AmpC-KP phages. The isolated AmpC phages had a high effectivity and specificity for AmpC-KP with a narrow host range and could survive under harsh conditions such as (temperature, pH, and chloroform).

    Matched MeSH terms: Hydrogen-Ion Concentration
  8. Fulltext A dual-function Savinase-catalyzed strategy for enhanced bioactive protein hydrolysate production from Nannochloropsis oculata for personal care and cosmetic applications
    Susanto S, Ng WZ, Liow MY, Sahadevan S, Chan ES, Borhan N, et al.
    Int J Biol Macromol, 2026 Nov;381(Pt 2):154294.
    PMID: 42680025 DOI: 10.1016/j.ijbiomac.2026.154294
    Microalgae are a sustainable source of bioactive proteins for personal care and cosmetic applications. Conventional alkaline extraction can achieve high protein recovery but relies on harsh chemical conditions that often compromise protein integrity, reduce bioactivity, and raise environmental concerns. Moreover, the extracted proteins often require additional enzymatic hydrolysis to enhance their functionality, thus increasing process complexity. This study proposes a dual-function Savinase-assisted in situ extraction strategy for the simultaneous extraction and functionalization of protein from Nannochloropsis oculata (N. oculata). Process optimization using improvement in protein extraction yield (IPEY) as the performance indicator identified optimal conditions of pH 7, 50 °C, 0.5 wt% Savinase and 2 h hydrolysis, under which a maximum IPEY of 85.1% was achieved. Fluorescence spectroscopy and zeta potential measurements confirmed that Savinase remained structurally stable under the optimized conditions while promoting protein solubilization. The resulting protein hydrolysates exhibited enhanced functional properties, with ABTS•+ radical scavenging activity reaching 83.3% at 5 mg/mL, representing a 56.9% increase compared with the non-enzymatic control. In addition, UV absorption analysis revealed a critical wavelength (λc) of 383.6 nm, indicating broad-spectrum photoprotective potential. Overall, the proposed one-step Savinase-assisted process provides a mild, sustainable, and effective strategy for producing bioactive microalgal protein hydrolysates with strong potential as natural ingredients in skin-protective cosmetic formulations.
    Matched MeSH terms: Hydrogen-Ion Concentration
  9. Preparation and evaluation of a coated smectite clay-based material modified with epichlorohydrin-dimethylamine for the diclofenac removal
    Shamsudin MS, Taib MHA, Azha SF, Bonilla-Petriciolet A, Ismail S
    Environ Sci Pollut Res Int, 2023 Dec;30(60):124596-124609.
    PMID: 35608765 DOI: 10.1007/s11356-022-20815-9
    This study reports the analysis of diclofenac removal from aqueous solution using a novel adsorbent coating with amphoteric surface. This adsorbent coating was improved using a new amphoteric ratio to increase its performance for the removal of pharmaceuticals such as diclofenac. The adsorbent coating was formulated using acrylic polymer emulsion, smectite-based clay powder and epichlorohydrin-dimethylamine to obtain a layer form via the implementation of a facile synthesis method. In a previous study, this adsorbent coating was successful to remove cationic and anionic dyes. Therefore, this research aimed to further investigate and test its application in the removal of other emerging water pollutants like pharmaceuticals. SEM, EDX, and FTIR analyses were carried out for the characterization of this novel adsorbent. The effects of adsorbent composition, diclofenac concentration, temperature, and solution pH were studied and modeled. The best conditions to improve the diclofenac adsorption was 303 K and pH 3 where the adsorption capacity was 25.59 mg/g. Adsorption isotherms and kinetics were quantified and modeled, and the corresponding adsorption mechanism was also analyzed. Diclofenac adsorption with this novel material was exothermic and spontaneous. This alternative adsorbent is promising for diclofenac removal from industrial wastewater systems.
    Matched MeSH terms: Hydrogen-Ion Concentration
  10. Synthesis of surface-modified porous polysulfides from soybean oil by inverse vulcanization and its sorption behavior for Pb(II), Cu(II), and Cr(III)
    Lyu S, Abidin ZZ, Yaw TCS, Resul MFMG
    Environ Sci Pollut Res Int, 2024 Apr;31(20):29264-29279.
    PMID: 38573576 DOI: 10.1007/s11356-024-33152-w
    Guided by efficient utilization of natural plant oil and sulfur as low-cost sorbents, it is desired to tailor the porosity and composition of polysulfides to achieve their optimal applications in the management of aquatic heavy metal pollution. In this study, polysulfides derived from soybean oil and sulfur (PSSs) with improved porosity (10.2-22.9 m2/g) and surface oxygen content (3.1-7.0 wt.%) were prepared with respect to reaction time of 60 min, reaction temperature of 170 °C, and mass ratios of sulfur/soybean oil/NaCl/sodium citrate of 1:1:3:2. The sorption behaviors of PSSs under various hydrochemical conditions such as contact time, pH, ionic strength, coexisting cations and anions, temperature were systematically investigated. PSSs presented a fast sorption kinetic (5.0 h) and obviously improved maximum sorption capacities for Pb(II) (180.5 mg/g), Cu(II) (49.4 mg/g), and Cr(III) (37.0 mg/g) at pH 5.0 and T 298 K, in comparison with polymers made without NaCl/sodium citrate. This study provided a valuable reference for the facile preparation of functional polysulfides as well as a meaningful option for the removal of aquatic heavy metals.
    Matched MeSH terms: Hydrogen-Ion Concentration
  11. Astrup studies in the newborn
    Hee Wan Jang H
    Med J Malaya, 1971 Mar;25(3):208-10.
    PMID: 4253248
    Matched MeSH terms: Hydrogen-Ion Concentration*
  12. Fulltext Effect of the Roasting Conditions on the Physicochemical, Quality and Sensory Attributes of Coffee-Like Powder and Brew from Defatted Palm Date Seeds
    Fikry M, Yusof YA, Al-Awaadh AM, Rahman RA, Chin NL, Mousa E, et al.
    Foods, 2019 Feb 06;8(2).
    PMID: 30736332 DOI: 10.3390/foods8020061
    Developing a bioactive brew is a novel track for revalorization of palm date byproducts. The effect of roasting temperature (160, 180 and 200 °C ) and roasting time (10, 20 and 30 min) on the hardness of the roasted date seeds, moisture content of the defatted roasted date seed powder (DRDSP), bulk density of the DRDSP, color parameters of DRDSP, quality attributes (extraction yield, pH and browning index), the chemical properties (antioxidants and total phenolic content) and the sensory attributes (color, aroma, taste and overall preference) of the brew prepared from DRDSP was studied. The physicochemical, quality, and sensory attributes were found to be significantly influenced by the roasting temperature and time. Additionally, the models proposed could satisfactorily describe the changes in the different properties during the roasting process. The optimum conditions of the roasting process obtained using the superimposed contour plot were 199.9 °C and 21.5 min. In the longer term, the results of this study would be beneficial for the manufacturers of the date seeds powder and brew.
    Matched MeSH terms: Hydrogen-Ion Concentration
  13. Synthesis of chitosan-ethylene glycol diglycidyl ether/TiO2 nanoparticles for adsorption of reactive orange 16 dye using a response surface methodology approach
    Abdulhameed AS, Jawad AH, Mohammad AT
    Bioresour Technol, 2019 Dec;293:122071.
    PMID: 31491651 DOI: 10.1016/j.biortech.2019.122071
    Chitosan-ethylene glycol diglycidyl ether/TiO2 nanoparticles (CS-EGDE/TNP) composite was synthesized to be biosorbent for the removal of reactive orange 16 (RO16) dye from aqueous solution. The CS-EGDE/TNP composite was characterized via BET, XRD, FTIR, and SEM-EDX techniques. Response surface methodology (RSM) with Box-Behnken design (BBD) was applied to optimize the adsorption key parameters such as adsorbent dose (A: 0.02-0.08 g/L), RO16 dye concentration (B: 20-80 mg/L), solution pH (C: 4-10), temperature (D: 30-50 °C), and contact time (E: 30-90 min). The adsorption isotherm followed Freundlich model and pseudo-second order (PSO) kinetic model. The adsorption capacity of CS-EGDE/TNP for RO16 dye was 1407.4 mg/g at 40 °C. The adsorption mechanism of RO16 dye on the surface of CS-EGDE/TNP can be attributed to various interactions such as electrostatic attraction, n-π interaction, Yoshida H-bonding, and H-bonding. Results supported the potential use of CS-EGDE/TNP as effective adsorbent for the treatment of acid reactive dye.
    Matched MeSH terms: Hydrogen-Ion Concentration
  14. Fulltext Removal of reactive red 4 dye using chitosan-epichlorohydrin/ TiO2 nanocomposite: application of response surface methodology
    Ibrahim Awad Mohammed, Abdallah Reghioua, Emad Yousif, Ali H. Jawad, Nurul Najwa Abd Malek
    Science Letters, 2020;14(1):96-108.
    MyJurnal
    Chitosan-epichlorohydrin/TiO2 composite was synthesized to be employed as an adsorbent for the
    removal of reactive red 4 (RR4) dye from aqueous solution. Response surface methodology (RSM) with 3-level Box-Behnken design (BBD) was utilized for the optimization of the removal of RR4. The process key variables which include adsorbent dose (A: 0.5 – 1.5 g), pH (B: 4 – 10) and time (30 – 80 min) were selected for the optimization process. The experimental data for RR4 removal were statistically analysed using analysis of variance (ANOVA). The significant interaction between key parameters on RR4 removal efficiency was observed by interaction between AB and AC. The highest RR4 removal (95.08%) was obtained under the following conditions; adsorbent dose (1.0 g), pH 4 and time of 80 min.
    Matched MeSH terms: Hydrogen-Ion Concentration
  15. Surfactant as an Additive for the Recovery of Potent Antioxidants from Garcinia mangostana Pericarps Using a Polymer/Salt Aqueous Biphasic System
    Ng HS, Kee PE, Tan GY, Yim HS, Lan JC
    Appl Biochem Biotechnol, 2020 May;191(1):273-283.
    PMID: 32335865 DOI: 10.1007/s12010-020-03284-z
    Garcinia mangostana pericarp is a good source of natural antioxidants with numerous functional properties. The conventional approaches for the recovery of antioxidants from Garcinia mangostana pericarp require long processing time and high temperature, which may cause degradation or loss of bioactivity of antioxidants, and often result in low recovery efficiency. In this study, the extraction of antioxidants from Garcinia mangostana pericarp was investigated using a polyethylene glycol (PEG)/citrate aqueous biphasic system (ABS) with the addition of surfactants. The optimum condition for the recovery of antioxidants was achieved in PEG 1000/citrate ABS of pH 8 with tie-line length (TLL) of 48.3% (w/w), volume ratio (VR) of 1.6, 0.2% (w/w) sample loading and addition of 1.0% (w/w) Tween 85. The antioxidants were recovered in the PEG-rich top phase with a high K value of 18.23 ± 0.33 and a recovery yield of 92.01% ± 0.09. The findings suggested that the addition of surfactants to polymer/salt ABS can enhance the recovery of antioxidants from Garcinia mangostana pericarps by conserving the antioxidative properties.
    Matched MeSH terms: Hydrogen-Ion Concentration
  16. Utilisation of environmentally friendly okara-based biosorbent for cadmium(II) removal
    Hiew BYZ, Lee LY, Lee XJ, Thangalazhy-Gopakumar S, Gan S
    Environ Sci Pollut Res Int, 2021 Aug;28(30):40608-40622.
    PMID: 32601866 DOI: 10.1007/s11356-020-09594-3
    Heavy metals released by various industries are among the major pollutants found in water resources. In this research, biosorption technique was employed to remove cadmium (Cd2+) from an aqueous system using a novel biosorbent developed from okara waste (OW), a residue from soya bean-based food and beverage processing. Characterisation results revealed that the OW biosorbent contained functional groups such as hydroxyl-, carboxyl- and sulphur-based functional groups, and the surface of the biosorbent was rough with multiple fissures which might be the binding sites for the pollutant. The effects of dosage, solution pH, initial Cd2+ concentration, temperature and contact time were investigated using batch adsorption mode. The biosorption equilibrium and kinetic were best described by the Langmuir and Elovich models, respectively. The maximum biosorption capacities predicted by the Langmuir model were 10.91-14.80 mg/g at 30-70 °C, and the biosorption process was favourable as evident from 0 < RL < 1. The uptake of Cd2+ by the OW biosorbent was spontaneous and endothermic. The plausible biosorption mechanisms of this study could be ionic exchange, hydrogen bonding and electrostatic interactions. The Cd2+ loaded OW biosorbent could be regenerated using 0.4 M of HCl solution and regeneration was studied for 4 adsorption-desorption cycles. The present investigation supported that OW can be reused as a value-added biosorbent product for the removal of Cd2+ from the contaminated water.
    Matched MeSH terms: Hydrogen-Ion Concentration
  17. Fulltext Physico-Chemical Characteristics and Microbiological Quality of Broiler Chicken Pectoralis major Muscle Subjected to Different Storage Temperature and Duration
    Ab Aziz MF, Hayat MN, Kaka U, Kamarulzaman NH, Sazili AQ
    Foods, 2020 Jun 04;9(6).
    PMID: 32512753 DOI: 10.3390/foods9060741
    Storage temperature and duration plays an important role in meat processing. Observations in poultry processing plants have shown a serious deviation in storage condition compared to the recommended procedures. Furthermore, there is still a paucity of evidence on the effects of storage temperature and duration on meat quality and microbial population. The aim of this study was to determine the effects of different temperature and duration during storage on physico-chemical properties and microbiological quality of broiler chicken Pectoralis major muscle. Eighty birds were slaughtered and processed, following which the packed boneless breast (PBB) (each bird was to provide two breast muscle samples; left breast and right breast) was divided into four groups, each consisted of 40 PBB. Each group was subsequently assigned to storage either at 4 °C, -10 °C, -18 °C or -40 °C, for 24 h before 20 PBB samples from each group were transported to the respective laboratory for meat quality and microbiological analysis. The remaining 20 PBB from each storage temperature were stored for 72 h before being transported for analysis. Results have shown significant increases in drip loss and cooking loss as the storage temperature decreases. Similarly, storage duration significantly affected cooking loss, of which, samples stored for 72 h exhibited higher cooking loss compared to those stored for 24 h. For color, significant differences were only observed in lightness (L*) and redness (a*) values. Longer duration of storage had significantly improved tenderness whereby, samples that have been stored for a shorter duration presented higher pH values. Populations of coliform and Salmonella decreased significantly with decreasing temperature and increasing storage duration.
    Matched MeSH terms: Hydrogen-Ion Concentration
  18. Spectroscopic studies for the inclusion complexation of ketoprofen enantiomers with β-cyclodextrin
    Obaid A, Jamil AKM, Prabu S, Saharin SM, Mohamad S
    Spectrochim Acta A Mol Biomol Spectrosc, 2020 Nov 05;241:118674.
    PMID: 32652287 DOI: 10.1016/j.saa.2020.118674
    Inclusion complexes of R-ketoprofen and S-ketoprofen enantiomers with β-cyclodextrin (β-CD) in aqueous solution were studied using various spectroscopic techniques such as Raman, FTIR, UV and fluorescence. The different relative intensities and characteristic band shifts of the two enantiomers from Raman spectra suggests different interaction when complexed with β-CD. Raman experiments revealed a noticeable diminishing of the CC vibration and ring deformation, which indicate the embedding of ketoprofen inside the β-CD cavity. It's revealed that distinct differences between R- and S-ketoprofen in the presence of β-CD at neutral pH. The stoichiometry ratio and binding constant of the inclusion complexes were calculated using Benesi-Hildebrand plot. Both enantiomers showed stoichiometry ratio of 1:1 inclusion complex with β-CD. The binding constant of R-ketoprofen (4088 M-1) is higher than S-ketoprofen (2547 M-1). These values indicated that β-CD formed inclusion complexes more preferentially with R-ketoprofen than S-ketoprofen. Results demonstrated that β-CD can be used as a promising chiral selector for ketoprofen enantiomers.
    Matched MeSH terms: Hydrogen-Ion Concentration
  19. Adsorption behavior of mercury over hydrated lime: Experimental investigation and adsorption process characteristic study
    Ullah S, Al-Sehemi AG, Mubashir M, Mukhtar A, Saqib S, Bustam MA, et al.
    Chemosphere, 2021 May;271:129504.
    PMID: 33445018 DOI: 10.1016/j.chemosphere.2020.129504
    This study reports the application of hydrated lime for the effective adsorption of the heavy mercury metal from the aqueous phase solutions. Initially, hydrated lime was subjected to structural characterization and thermal stability analysis. The FT-IR spectrum analysis revealed that the existence of the O-H bonds as a confirmation of hydrated lime formation. Subsequently, the XRD powder-based analysis demonstrated that most of the hydrated lime is pure crystalline material known as Portlandite while a small amount of calcite is also present in the structure of the hydrated lime. The thermal stability analysis revealed that the hydrated lime is highly thermally stable under harsh conditions without decomposing at higher temperatures up to 500 °C. Furthermore, the hydrated lime was subjected to the selective adsorption of heavy metal mercury to investigate the potential influence of the adsorbent particle size and loading on adsorption capacity. The results demonstrated that the decrease in the adsorbent particle size leads to the improvement in the mercury adsorption attributing to the rise in specific surface area. The enhancement in the loading of the adsorbent resulted in a reduction in mercury adsorption directing to the fact that already adsorbed metal ions onto the adsorbent surface lead to hindrance for the adsorption of other ions of heavy metal. These results lead to a significant impact on modern in inventing different adsorbents with promising water treatment efficiency for more industrial applications and the related recovery of mercury.
    Matched MeSH terms: Hydrogen-Ion Concentration
  20. Novel micro-structured carbon-based adsorbents for notorious arsenic removal from wastewater
    Islam A, Teo SH, Ahmed MT, Khandaker S, Ibrahim ML, Vo DN, et al.
    Chemosphere, 2021 Jun;272:129653.
    PMID: 33486455 DOI: 10.1016/j.chemosphere.2021.129653
    The contamination of groundwater by arsenic (As) in Bangladesh is the biggest impairing of a population, with a large number of peoples affected. Specifically, groundwater of Gangetic Delta is alarmingly contaminated with arsenic. Similar, perilous circumstances exist in many other countries and consequently, there is a dire need to develop cost-effective decentralized filtration unit utilizing low-cost adsorbents for eliminating arsenic from water. Morphological synthesis of carbon with unique spherical, nanorod, and massive nanostructures were achieved by solvothermal method. Owing to their intrinsic adsorption properties and different nanostructures, these nanostructures were employed as adsorption of arsenic in aqueous solution, with the purpose to better understanding the morphological effect in adsorption. It clearly demonstrated that carbon with nanorods morphology exhibited an excellent adsorption activity of arsenite (about 82%) at pH 3, remarkably superior to the two with solid sphere and massive microstructures, because of its larger specific surface area, enhanced acid strength and improved adsorption capacity. Furthermore, we discovered that iron hydroxide radicals and energy-induced contact point formation in nanorods are the responsible for the high adsorption of As in aqueous solution. Thus, our work provides insides into the microstructure-dependent capability of different carbon for As adsorption applications.
    Matched MeSH terms: Hydrogen-Ion Concentration
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links