MyMedR

Displaying publications 401 - 420 of 515 in total

Abstract:

Sort:

Evaluation of yellow sticky traps for monitoring the population of thrips (Thysanoptera) in a mango orchard

Aliakbarpour H, Rawi CS

Environ Entomol, 2011 Aug;40(4):873-9.
PMID: 22251688 DOI: 10.1603/EN10201

Populations of several thrips species were estimated using yellow sticky traps in an orchard planted with mango, Mangifera indica L. during the dry and wet seasons beginning in late 2008-2009 on Penang Island, Malaysia. To determine the efficacy of using sticky traps to monitor thrips populations, we compared weekly population estimates on yellow sticky traps with thrips population sizes that were determined (using a CO(2) method) directly from mango panicles. Dispersal distance and direction of thrips movement out of the orchard also were studied using yellow sticky traps placed at three distances from the edge of the orchard in four cardinal directions facing into the orchard. The number of thrips associated with the mango panicles was found to be correlated with the number of thrips collected using the sticky trap method. The number of thrips captured by the traps decreased with increasing distance from the mango orchard in all directions. Density of thrips leaving the orchard was related to the surrounding vegetation. Our results demonstrate that sticky traps have the potential to satisfactorily estimate thrips populations in mango orchards and thus they can be effectively employed as a useful tactic for sampling thrips.

Matched MeSH terms: Carbon Dioxide
Extracorporeal carbon dioxide removal (ECCO2R) in respiratory deficiency and current investigations on its improvement: a review

Manap HH, Abdul Wahab AK

J Artif Organs, 2017 Mar;20(1):8-17.
PMID: 27193131 DOI: 10.1007/s10047-016-0905-x

The implementation of extracorporeal carbon dioxide removal (ECCO2R) as one of the extracorporeal life support system is getting more attention today. Thus, the objectives of this paper are to study the clinical practice of commercial ECCO2R system, current trend of its development and also the perspective on future improvement that can be done to the existing ECCO2R system. The strength of this article lies in its review scope, which focuses on the commercial ECCO2R therapy in the market based on membrane lung and current investigation to improve the efficiency of the ECCO2R system, in terms of surface modification by carbonic anhydrase (CA) immobilization technique and respiratory electrodialysis (R-ED). Our methodology approach involves the identification of relevant published literature from PubMed and Web of Sciences search engine using the terms Extracorporeal Carbon Dioxide Removal (ECCO2R), Extracorporeal life support, by combining terms between ECCO2R and CA and also ECCO2R with R-ED. This identification only limits articles in English language. Overall, several commercial ECCO2R systems are known and proven safe to be used in patients in terms of efficiency, safety and risk of complication. In addition, CA-modified hollow fiber for membrane lung and R-ED are proven to have good potential to be applied in conventional ECCO2R design. The detailed technique and current progress on CA immobilization and R-ED development were also reviewed in this article.

Matched MeSH terms: Carbon Dioxide
Fulltext Antioxidant effect of supercritical CO2 extracted Nigella sativa L. seed extract on deep fried oil quality parameters

Solati Z, Baharin BS

J Food Sci Technol, 2015 Jun;52(6):3475-84.
PMID: 26028729 DOI: 10.1007/s13197-014-1409-4

Effect of supercritical CO2 extracted Nigella sativa L. seed extract (NE) on frying performance of sunflower oil and refined, bleached and deodorized (RBD) palm olein was investigated at concentrations of 1.2 % and 1.0 % respectively. Two frying systems containing 0 % N. sativa L. extract (Control) and 0.02 % butylated hydroxytoluene (BHT) were used for comparison. Physicochemical properties such as fatty acid composition (FAC), Peroxide Value (PV), Anisidine Value (AV), Totox Value (TV), Total Polar Content (TPC), C18:2/C16:0 ratio and viscosity of frying oils were determined during five consecutive days of frying. Results have shown that N. sativa L. extract was able to improve the oxidative stability of both frying oils during the frying process compared to control. The stabilizing effect of antioxidants were in the order of BHT > NE. RBD palm olein was found to be more stable than sunflower oil based on the ratio of linoleic acid (C18:2) to palmitic acid (C16:0) and fatty acid composition.

Matched MeSH terms: Carbon Dioxide
Fulltext Effect of COVID-19 virus on reducing GHG emission and increasing energy generated by renewable energy sources: A brief study in Malaysian context

Naderipour A, Abdul-Malek Z, Ahmad NA, Kamyab H, Ashokkumar V, Ngamcharussrivichai C, et al.

Environ Technol Innov, 2020 Nov;20:101151.
PMID: 32923529 DOI: 10.1016/j.eti.2020.101151

Coronavirus 2019 (COVID-19) has globally affected the human mortality rate and economic history of the modern world. According to the World Health Organization, COVID-19 has caused a severe threat to the health of the vulnerable groups, notably the elderly. There is still some disagreements regarding the source of the virus and its intermediate host. However, the spread of this disease has caused most countries to enforce strict curfew laws and close most industrial and recreational centres. This study aims to show the potential positive effects of COVID-19 on the environment and the increase of renewable energy generation in Malaysia. To prevent the spread of this disease, Malaysia enacted the Movement Control Order (MCO) law in March 2020. Implementation of this law led to a reduction in environmental pollution, especially air pollution, in this country. The greenhouse gases (GHG) emission , which was 8 Mt CO2 eq. from January 2020 to March 2020, reduced to <1 Mt CO2 eq. for April and May. The reduction of GHG emission and pollutant gases allowed more sunlight to reach photovoltaic panels, hence increasing the renewable energy generation.

Matched MeSH terms: Carbon Dioxide
Dissection of synechococcus rubisco large subunit sections involved in holoenzyme formation in escherichia coli by combinatorial section swapping and sequence analyses

Yee Hung Yeap, Teng Wei Koay, Boon Hoe Lim

Sains Malaysiana, 2018;47:2269-2289.

Engineering the CO2
-fixing enzyme ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) to improve photosynthesis
has long been sought. Rubisco large subunits (RbcL) are highly-conserved but because of certain undefined sequence
differences, plant Rubisco research cannot fully utilise the robust heterologous Escherichia coli expression system and its
GroEL folding machinery. Previously, a series of chimeric cyanobacteria Synechococcus elongatus Rubisco, incorporated
with sequences from the green alga Chlamydomonas reinhardtii, were expressed in E. coli; differences in RbcL sections
essential for holoenzyme formation were pinpointed. In this study, the remaining sections, presumably not crucial for
holoenzyme formation and also the small subunit (RbcS), are substituted to further ascertain the possible destabilising
effects of multiple section mutations. To that end, combinations of Synechococcus RbcL Sections 1 (residues 1-47), 2
(residues 48-97), 5 (residues 198-247) and 10 (residues 448-472), and RbcS, were swapped with collinear Chlamydomonas
sections and expressed in E. coli. Interestingly, only the chimera with Sections 1 and 2 together produces holoenzyme and
an interaction network of complementing amino acid changes is delineated by crystal structure analysis. Furthermore,
sequence-based analysis also highlighted possible GroEL binding site differences between the two RbcLs.

Matched MeSH terms: Carbon Dioxide
Potentially malignant disorders revisited-The lichenoid lesion/proliferative verrucous leukoplakia conundrum

Thomson PJ, Goodson ML, Smith DR

J Oral Pathol Med, 2018 Jul;47(6):557-565.
PMID: 29663518 DOI: 10.1111/jop.12716

BACKGROUND: Clinically identifiable potentially malignant disorders (PMD) precede oral squamous cell carcinoma development. Oral lichenoid lesions (OLL) and proliferative verrucous leukoplakia (PVL) are specific precursor lesions believed to exhibit both treatment resistance and a high risk of malignant transformation (MT).
METHODS: A retrospective review of 590 PMD patients treated in Northern England by CO2 laser surgery between 1996 and 2014 was carried out. Lesions exhibiting lichenoid or proliferative verrucous features were identified from the patient database and their clinicopathological features and outcome post-treatment determined at the study census date of 31 December 2014.
RESULTS: One hundred and 98 patients were identified as follows: 118 OLL and 80 PVL, most frequently leukoplakia at ventrolateral tongue and floor of mouth sites, equally distributed between males and females. Most exhibited dysplasia on incision biopsy (72% OLL; 85% PVL) and were treated by laser excision rather than ablation (88.1% OLL; 86.25% PVL). OLL were more common in younger patients (OLL 57.1 year; PVL 62.25 years; P = .008) and more likely than PVL to present as erythroleukoplakia (OLL 15.3%; PVL 2.5%; P = .003). Whilst no significant difference was seen between OLL and PVL achieving disease-free status (69.5% and 65%, respectively; P = .55), this was less than the overall PMD cohort (74.2%). MT was identified in 2 OLL (1.7%) and 2 PVL (2.5%) during follow-up.
CONCLUSION: One-third of PMD cases showed features of OLL or PVL, probably representing a disease presentation continuum. Post-treatment disease-free status was less common in OLL and PVL, although MT was infrequent.

Matched MeSH terms: Carbon Dioxide
Non-native mangroves support carbon storage, sediment carbon burial, and accretion of coastal ecosystems

Soper FM, MacKenzie RA, Sharma S, Cole TG, Litton CM, Sparks JP

Glob Chang Biol, 2019 Aug 29.
PMID: 31465581 DOI: 10.1111/gcb.14813

Mangrove forests play an important role in climate change adaptation and mitigation by maintaining coastline elevations relative to sea level rise, protecting coastal infrastructure from storm damage and storing substantial quantities of carbon (C) in live and detrital pools. Determining the efficacy of mangroves in achieving climate goals can be complicated by difficulty in quantifying C inputs (i.e., differentiating newer inputs from younger trees from older residual C pools), and mitigation assessments rarely consider potential offsets to CO2 storage by methane (CH4 ) production in mangrove sediments. The establishment of non-native Rhizophora mangle along Hawaiian coastlines over the last century offers an opportunity to examine the role mangroves play in climate mitigation and adaptation both globally and locally as novel ecosystems. We quantified total ecosystem C storage, sedimentation, accretion, sediment organic C burial and CH4 emissions from ~70 year old R. mangle stands and adjacent uninvaded mudflats. Ecosystem C stocks of mangrove stands exceeded mudflats by 434 ± 33 Mg C ha-1 , and mangrove establishment increased average coastal accretion by 460%. Sediment organic C burial increased 10-fold (to 4.5 Mg C ha-1 yr-1 ), double the global mean for old growth mangrove forests, suggesting that C accumulation from younger trees may occur faster than previously thought, with implications for mangrove restoration. Simulations indicate that increased CH4 emissions from sediments offset ecosystem CO2 storage by only 2-4%, equivalent to 30-60 Mg CO2 -eq ha-1 over mangrove lifetime (100-year sustained global warming potential). Results highlight the importance of mangroves as novel systems that can rapidly accumulate C, have a net positive atmospheric greenhouse gas removal effect, and support shoreline accretion rates that outpace current sea level rise. Sequestration potential of novel mangrove forests should be taken into account when considering their removal or management, especially in the context of climate mitigation goals.

Matched MeSH terms: Carbon Dioxide
Fulltext Non-Supported Nickel-Based Coral Sponge-Like Porous Magnetic Alloys for Catalytic Production of Syngas and Carbon Bio-Nanofilaments via a Biogas Decomposition Approach

Ali B, Tasirin SM, Aminayi P, Yaakob Z, Ali NT, Noori W

Nanomaterials (Basel), 2018 Dec 14;8(12).
PMID: 30558256 DOI: 10.3390/nano8121053

Porous Ni, Ni-Co, Ni-Fe, and Ni-Cu magnetic alloys with a morphology similar to a giant barrel sponge were synthesized via a facile co-precipitation procedure and then by hydrogen reduction treatment. For the first time, the non-supported alloys with their unique morphology were employed in catalytic biogas decomposition (CBD) at a reaction temperature of 700 °C and 100 mL min-1 to produce syngas and carbon bio-nanofilaments, and the catalysts' behavior, CH₄ and CO₂ conversion, and the carbon produced during the reaction were investigated. All of the equimolar alloy catalysts showed good activity and stability for the catalytic biogas decomposition. The highest sustainability factor (0.66) and carbon yield (424%) were accomplished with the Ni-Co alloy without any significant inactivation for six hours, while the highest carbon efficiency of 36.43 was obtained with the Ni-Co catalyst, which is considered relatively low in comparison with industry standards, indicating a low carbon production process efficiency, possibly due to the relatively high biogas flow rate. The higher activity of the Ni-Co alloy catalyst was associated with the synergistic impact between nickel and cobalt, allowing the catalyst to maintain a high stability throughout the reaction period. Moreover, highly uniform, interwoven carbon bio-nanofilaments with a parallel and fishbone structure were achieved.

Matched MeSH terms: Carbon Dioxide
Fulltext Phase behavior and fluid interactions of a CO2-Light oil system at high pressures and temperatures

Rezk MG, Foroozesh J

Heliyon, 2019 Jul;5(7):e02057.
PMID: 31384679 DOI: 10.1016/j.heliyon.2019.e02057

This paper investigates the phase behavior and mutual interactions between a light crude oil and CO2 at high pressures and high temperatures (HPHT). To do so, we have measured PVT properties of the CO2-oil system at HPHT using a PVT setup. We have also tried to present a detailed methodology for measuring PVT properties of CO2-oil systems and highlight the difficulties such as oil vaporization by CO2 during the experiments. A crude oil sample, collected from a Malaysian oil field, was used here. Our experiments indicated that, CO2 solubility in the oil increased at higher pressures when measured at a fixed temperature. Our experiments also showed that increasing the test temperature would reduce CO2 solubility in the oil, while its effect is more significant at higher pressures. The swelling factor (SF) measurements showed an increasing trend with pressure up to a certain value so-called extraction pressure, at which, the SF started to be reduced even became less than one. The measurements of oil viscosity indicated that CO2 dissolution in the oil sample could reduce the mixture viscosity up to 61%. The interfacial tensions between CO2 and the crude oil at different pressures were also measured while the results were used to estimate the minimum miscibility pressure (MMP) and the first contact miscibility (FCM) pressure. The IFT measurements at various pressures displayed a reduction trend as a result of more CO2 dissolution in the oil but with two different slopes. That is, at lower pressure values, the measured IFTs were sharply reduced with pressure, while the reduction rate of the IFT became less when pressures exceeded the extraction pressure. This study helps with determining the optimum pressure and temperature conditions of CO2-oil systems to have a minimum IFT, a maximum CO2 solubility and SF, and a minimum oil viscosity that are favorable for CO2-enhanced oil recovery projects. Additionally, the methodology presented here gives guidelines on how to design PVT experiments of CO2-oil systems for petroleum and chemical engineering applications.

Matched MeSH terms: Carbon Dioxide
Fulltext Potential of Zeolite and Algae in Biomass Immobilization

Emami Moghaddam SA, Harun R, Mokhtar MN, Zakaria R

Biomed Res Int, 2018;2018:6563196.
PMID: 30643814 DOI: 10.1155/2018/6563196

The interest in utilizing algae for wastewater treatment has been increased due to many advantages. Algae-wastewater treatment system offers a cost-efficient and environmentally friendly alternative to conventional treatment processes such as electrocoagulation and flocculation. In this biosystem, algae can assimilate nutrients in the wastewater for their growth and simultaneously capture the carbon dioxide from the atmosphere during photosynthesis resulting in a decrease in the greenhouse gaseousness. Furthermore, the algal biomass obtained from the treatment process could be further converted to produce high value-added products. However, the recovery of free suspended algae from the treated effluent is one of the most important challenges during the treatment process as the current methods such as centrifugation and filtration are faced with the high cost. Immobilization of algae is a suitable approach to overcome the harvesting issue. However, there are some drawbacks with the common immobilization carriers such as alginate and polyacrylamide related to low stability and toxicity, respectively. Hence, it is necessary to apply a new carrier without the mentioned problems. One of the carriers that can be a suitable candidate for the immobilization is zeolite. To date, various types of zeolite have been used for the immobilization of cells of bacteria and yeast. If there is any possibility to apply them for the immobilization of algae, it needs to be considered in further studies. This article reviews cell immobilization technique, biomass immobilization onto zeolites, and algal immobilization with their applications. Furthermore, the potential application of zeolite as an ideal carrier for algal immobilization has been discussed.

Matched MeSH terms: Carbon Dioxide
Fulltext Elevated CO2 improves both lipid accumulation and growth rate in the glucose-6-phosphate dehydrogenase engineered Phaeodactylum tricornutum

Wu S, Gu W, Huang A, Li Y, Kumar M, Lim PE, et al.

Microb Cell Fact, 2019 Sep 23;18(1):161.
PMID: 31547820 DOI: 10.1186/s12934-019-1214-x

BACKGROUND: Numerous studies have shown that stress induction and genetic engineering can effectively increase lipid accumulation, but lead to a decrease of growth in the majority of microalgae. We previously found that elevated CO2 concentration increased lipid productivity as well as growth in Phaeodactylum tricornutum, along with an enhancement of the oxidative pentose phosphate pathway (OPPP) activity. The purpose of this work directed toward the verification of the critical role of glucose-6-phosphate dehydrogenase (G6PDH), the rate-limiting enzyme in the OPPP, in lipid accumulation in P. tricornutum and its simultaneous rapid growth rate under high-CO2 (0.15%) cultivation.
RESULTS: In this study, G6PDH was identified as a target for algal strain improvement, wherein G6PDH gene was successfully overexpressed and antisense knockdown in P. tricornutum, and systematic comparisons of the photosynthesis performance, algal growth, lipid content, fatty acid profiles, NADPH production, G6PDH activity and transcriptional abundance were performed. The results showed that, due to the enhanced G6PDH activity, transcriptional abundance and NAPDH production, overexpression of G6PDH accompanied by high-CO2 cultivation resulted in a much higher of both lipid content and growth in P. tricornutum, while knockdown of G6PDH greatly decreased algal growth as well as lipid accumulation. In addition, the total proportions of saturated and unsaturated fatty acid, especially the polyunsaturated fatty acid eicosapentaenoic acid (EPA; C20:5, n-3), were highly increased in high-CO2 cultivated G6PDH overexpressed strains.
CONCLUSIONS: The successful of overexpression and antisense knockdown of G6PDH well demonstrated the positive influence of G6PDH on algal growth and lipid accumulation in P. tricornutum. The improvement of algal growth, lipid content as well as polyunsaturated fatty acids in high-CO2 cultivated G6PDH overexpressed P. tricornutum suggested this G6PDH overexpression-high CO2 cultivation pattern provides an efficient and economical route for algal strain improvement to develop algal-based biodiesel production.

Matched MeSH terms: Carbon Dioxide
In-situ growth of TiO2 imbedded Ti3C2TA nanosheets to construct PCN/Ti3C2TA MXenes 2D/3D heterojunction for efficient solar driven photocatalytic CO2 reduction towards CO and CH4 production

Tahir M, Tahir B

J Colloid Interface Sci, 2021 Jun;591:20-37.
PMID: 33588310 DOI: 10.1016/j.jcis.2021.01.099

Constructing efficient structured materials for artificial photosynthesis of CO2 is a promising strategy to produce renewable fuels in addition of mitigating greenhouse effect. In this work, 2D porous g-C3N4 (PCN) coupled exfoliated 3D Ti3C2TA MXene (TiC) nanosheets with TiO2 NPs in-situ growth was constructed in a single step through HF treatment approach. The different exfoliated TiC structures were successfully synthesized for adjusting HF etching time (24 h, 48 h and 96 h). With growing etchant time from 24 to 96 h, the amount of TiO2 produced was increased, but it has adverse effects on CO and CH4 production rate. The maximum production rates for CO and CH4 of 317.4 and 78.55 µmol g-1 h-1 were attained when the 10TiC-48/PCN was employed than using TiC-24/PCN, TiC-96/PCN and PCN composite samples, respectively. The performance of 10TiC-48/PCN composite for CO and CH4 evolution were 9.9 and 6.7 folds higher than using pristine PCN sample, respectively. The possible mechanism is assigned to porous structure with intimate contact enabling efficient charge carrier separation with the role of TiO2 NPs to work as a bridge to transport electrons towards MXene surface. Among the reducing agents, water was favorable for CO evolution, whereas, methanol-water system promoted CH4 production. All these findings confirm that heterojunction formation facilitates charges separation and can be further used in solar energy relating application.

Matched MeSH terms: Carbon Dioxide
Metal-Organic Framework Decorated Cuprous Oxide Nanowires for Long-lived Charges Applied in Selective Photocatalytic CO2 Reduction to CH4

Wu H, Kong XY, Wen X, Chai SP, Lovell EC, Tang J, et al.

Angew Chem Int Ed Engl, 2021 Apr 06;60(15):8455-8459.
PMID: 33368920 DOI: 10.1002/anie.202015735

Improving the stability of cuprous oxide (Cu2 O) is imperative to its practical applications in artificial photosynthesis. In this work, Cu2 O nanowires are encapsulated by metal-organic frameworks (MOFs) of Cu3 (BTC)2 (BTC=1,3,5-benzene tricarboxylate) using a surfactant-free method. Such MOFs not only suppress the water vapor-induced corrosion of Cu2 O but also facilitate charge separation and CO2 uptake, thus resulting in a nanocomposite representing 1.9 times improved activity and stability for selective photocatalytic CO2 reduction into CH4 under mild reaction conditions. Furthermore, direct transfer of photogenerated electrons from the conduction band of Cu2 O to the LUMO level of non-excited Cu3 (BTC)2 has been evidenced by time-resolved photoluminescence. This work proposes an effective strategy for CO2 conversion by a synergy of charge separation and CO2 adsorption, leading to the enhanced photocatalytic reaction when MOFs are integrated with metal oxide photocatalyst.

Matched MeSH terms: Carbon Dioxide
Fulltext Electrodeposited Hybrid Biocathode-Based CO2 Reduction via Microbial Electro-Catalysis to Biofuels

Anwer AH, Khan N, Umar MF, Rafatullah M, Khan MZ

Membranes (Basel), 2021 Mar 22;11(3).
PMID: 33810075 DOI: 10.3390/membranes11030223

Microbial electrosynthesis is a new approach to converting C1 carbon (CO2) to more complex carbon-based products. In the present study, CO2, a potential greenhouse gas, was used as a sole carbon source and reduced to value-added chemicals (acetate, ethanol) with the help of bioelectrochemical reduction in microbial electrosynthesis systems (MES). The performance of MES was studied with varying electrode materials (carbon felt, stainless steel, and cobalt electrodeposited carbon felt). The MES performance was assessed in terms of acetic acid and ethanol production with the help of gas chromatography (GC). The electrochemical characterization of the system was analyzed with chronoamperometry and cyclic voltammetry. The study revealed that the MES operated with hybrid cobalt electrodeposited carbon felt electrode yielded the highest acetic acid (4.4 g/L) concentration followed by carbon felt/stainless steel (3.7 g/L), plain carbon felt (2.2 g/L), and stainless steel (1.87 g/L). The alcohol concentration was also observed to be highest for the hybrid electrode (carbon felt/stainless steel/cobalt oxide is 0.352 g/L) as compared to the bare electrodes (carbon felt is 0.22 g/L) tested, which was found to be in correspondence with the pH changes in the system. Electrochemical analysis revealed improved electrotrophy in the hybrid electrode, as confirmed by the increased redox current for the hybrid electrode as compared to plain electrodes. Cyclic voltammetry analysis also confirmed the role of the biocatalyst developed on the electrode in CO2 sequestration.

Matched MeSH terms: Carbon Dioxide
Fulltext Shading Effects on Leaf Gas Exchange, Leaf Pigments and Secondary Metabolites of Polygonum minus Huds., an Aromatic Medicinal Herb

Mohd Yusof FF, Yaacob JS, Osman N, Ibrahim MH, Wan-Mohtar WAAQI, Berahim Z, et al.

Plants (Basel), 2021 Mar 23;10(3).
PMID: 33806923 DOI: 10.3390/plants10030608

The growing demand for high value aromatic herb Polygonum minus-based products have increased in recent years, for its antioxidant, anticancer, antimicrobial, and anti-inflammatory potentials. Although few reports have indicated the chemical profiles and antioxidative effects of Polygonum minus, no study has been conducted to assess the benefits of micro-environmental manipulation (different shading levels) on the growth, leaf gas exchange and secondary metabolites in Polygonum minus. Therefore, two shading levels (50%:T2 and 70%:T3) and one absolute control (0%:T1) were studied under eight weeks and 16 weeks of exposures on Polygonum minus after two weeks. It was found that P. minus under T2 obtained the highest photosynthesis rate (14.892 µmol CO2 m-2 s-1), followed by T3 = T1. The increase in photosynthesis rate was contributed by the enhancement of the leaf pigments content (chlorophyll a and chlorophyll b). This was shown by the positive significant correlations observed between photosynthesis rate with chlorophyll a (r2 = 0.536; p ≤ 0.05) and chlorophyll b (r2 = 0.540; p ≤ 0.05). As the shading levels and time interval increased, the production of total anthocyanin content (TAC) and antioxidant properties of Ferric Reducing Antioxidant Power (FRAP) and 2,2-Diphenyl-1-picrylhydrazyl (DPPH) also increased. The total phenolic content (TPC) and total flavonoid content (TFC) were also significantly enhanced under T2 and T3. The current study suggested that P.minus induce the production of more leaf pigments and secondary metabolites as their special adaptation mechanism under low light condition. Although the biomass was affected under low light, the purpose of conducting the study to boost the bioactive properties in Polygonum minus has been fulfilled by 50% shading under 16 weeks' exposure.

Matched MeSH terms: Carbon Dioxide
Fulltext Functionalized Reduced Graphene Oxide Thin Films for Ultrahigh CO2 Gas Sensing Performance at Room Temperature

Gupta M, Hawari HF, Kumar P, Burhanudin ZA, Tansu N

Nanomaterials (Basel), 2021 Mar 03;11(3).
PMID: 33802318 DOI: 10.3390/nano11030623

The demand for carbon dioxide (CO2) gas detection is increasing nowadays. However, its fast detection at room temperature (RT) is a major challenge. Graphene is found to be the most promising sensing material for RT detection, owing to its high surface area and electrical conductivity. In this work, we report a highly edge functionalized chemically synthesized reduced graphene oxide (rGO) thin films to achieve fast sensing response for CO2 gas at room temperature. The high amount of edge functional groups is prominent for the sorption of CO2 molecules. Initially, rGO is synthesized by reduction of GO using ascorbic acid (AA) as a reducing agent. Three different concentrations of rGO are prepared using three AA concentrations (25, 50, and 100 mg) to optimize the material properties such as functional groups and conductivity. Thin films of three different AA reduced rGO suspensions (AArGO25, AArGO50, AArGO100) are developed and later analyzed using standard FTIR, XRD, Raman, XPS, TEM, SEM, and four-point probe measurement techniques. We find that the highest edge functionality is achieved by the AArGO25 sample with a conductivity of ~1389 S/cm. The functionalized AArGO25 gas sensor shows recordable high sensing properties (response and recovery time) with good repeatability for CO2 at room temperature at 500 ppm and 50 ppm. Short response and recovery time of ~26 s and ~10 s, respectively, are achieved for 500 ppm CO2 gas with the sensitivity of ~50 Hz/µg. We believe that a highly functionalized AArGO CO2 gas sensor could be applicable for enhanced oil recovery, industrial and domestic safety applications.

Matched MeSH terms: Carbon Dioxide
Fulltext Comparison of Hook and Straight Steel Fibers Addition on Malaysian Fly Ash-Based Geopolymer Concrete on the Slump, Density, Water Absorption and Mechanical Properties

Faris MA, Abdullah MMAB, Muniandy R, Abu Hashim MF, Błoch K, Jeż B, et al.

Materials (Basel), 2021 Mar 09;14(5).
PMID: 33803313 DOI: 10.3390/ma14051310

Geopolymer concrete has the potential to replace ordinary Portland cement which can reduce carbon dioxide emission to the environment. The addition of different amounts of steel fibers, as well as different types of end-shape fibers, could alter the performance of geopolymer concrete. The source of aluminosilicate (fly ash) used in the production of geopolymer concrete may lead to a different result. This study focuses on the comparison between Malaysian fly ash geopolymer concrete with the addition of hooked steel fibers and geopolymer concrete with the addition of straight-end steel fibers to the physical and mechanical properties. Malaysian fly ash was first characterized by X-ray fluorescence (XRF) to identify the chemical composition. The sample of steel fiber reinforced geopolymer concrete was produced by mixing fly ash, alkali activators, aggregates, and specific amounts of hook or straight steel fibers. The steel fibers addition for both types of fibers are 0%, 0.5%, 1.0%, 1.5%, and 2.0% by volume percentage. The samples were cured at room temperature. The physical properties (slump, density, and water absorption) of reinforced geopolymer concrete were studied. Meanwhile, a mechanical performance which is compressive, as well as the flexural strength was studied. The results show that the pattern in physical properties of geopolymer concrete for both types of fibers addition is almost similar where the slump is decreased with density and water absorption is increased with the increasing amount of fibers addition. However, the addition of hook steel fiber to the geopolymer concrete produced a lower slump than the addition of straight steel fibers. Meanwhile, the addition of hook steel fiber to the geopolymer concrete shows a higher density and water absorption compared to the sample with the addition of straight steel fibers. However, the difference is not significant. Besides, samples with the addition of hook steel fibers give better performance for compressive and flexural strength compared to the samples with the addition of straight steel fibers where the highest is at 1.0% of fibers addition.

Matched MeSH terms: Carbon Dioxide
Fulltext Engineering Properties of Waste Sawdust-Based Lightweight Alkali-Activated Concrete: Experimental Assessment and Numerical Prediction

Alabduljabbar H, Huseien GF, Sam ARM, Alyouef R, Algaifi HA, Alaskar A

Materials (Basel), 2020 Dec 02;13(23).
PMID: 33276508 DOI: 10.3390/ma13235490

Alkali activated concretes have emerged as a prospective alternative to conventional concrete wherein diverse waste materials have been converted as valuable spin-offs. This paper presents a wide experimental study on the sustainability of employing waste sawdust as a fine/coarse aggregate replacement incorporating fly ash (FA) and granulated blast furnace slag (GBFS) to make high-performance cement-free lightweight concretes. Waste sawdust was replaced with aggregate at 0, 25, 50, 75, and 100 vol% incorporating alkali binder, including 70% FA and 30% GBFS. The blend was activated using a low sodium hydroxide concentration (2 M). The acoustic, thermal, and predicted engineering properties of concretes were evaluated, and the life cycle of various mixtures were calculated to investigate the sustainability of concrete. Besides this, by using the available experimental test database, an optimized Artificial Neural Network (ANN) was developed to estimate the mechanical properties of the designed alkali-activated mortar mixes depending on each sawdust volume percentage. Based on the findings, it was found that the sound absorption and reduction in thermal conductivity were enhanced with increasing sawdust contents. The compressive strengths of the specimens were found to be influenced by the sawdust content and the strength dropped from 65 to 48 MPa with the corresponding increase in the sawdust levels from 0% up to 100%. The results also showed that the emissions of carbon dioxide, energy utilization, and outlay tended to drop with an increase in the amount of sawdust and show more the lightweight concrete to be more sustainable for construction applications.

Matched MeSH terms: Carbon Dioxide
Data on combustion, performance and emissions of a 6.8 L, 6-cylinder, Tier II diesel engine

Wan Mansor WN, Abdullah S, Jarkoni MNK, Vaughn JS, Olsen DB

Data Brief, 2020 Dec;33:106580.
PMID: 33304969 DOI: 10.1016/j.dib.2020.106580

A diesel engine has been a desirable machine due to its better fuel efficiency, reliability, and higher power output. It is widely used in transportations, locomotives, power generation, and industrial applications. The combustion of diesel fuel emits harmful emissions such as unburned hydrocarbons (HC), particulate matter (PM), nitrogen oxides (NOx), and carbon monoxides (CO). This article presents data on the efficiency, combustion, and emission of a 4-stroke diesel engine. The engine is a 6.8 L turbocharged 6-cylinder Tier II diesel engine fitted with a common rail injection system. The test was carried out at the Powerhouse Energy Campus, Colorado State University Engines and Energy Conversion facility. The ISO Standard 8178:4 Cycle D2 cycle was adopted for this study consists of five test runs at 1800 rpm. During the testing, CO, carbon dioxide (CO2), oxygen (O2), NOx, PM, unburned HC as a total HC (THC), methane (CH4), formaldehyde (CH2O), and volatile organic compound (VOC) emissions were measured. At the same time, the data acquisition system recorded the combustion data. The engine's performance is characterized by the brake specific fuel combustion (BSFC) and thermal efficiency. A dataset of correlations among the parameters was also presented in this article.

Matched MeSH terms: Carbon Dioxide
Exploring the potency of integrating semi-batch operation into lipid yield performance of Chlamydomonas sp. Tai-03

Tan CH, Show PL, Ling TC, Nagarajan D, Lee DJ, Chen WH, et al.

Bioresour Technol, 2019 Aug;285:121331.
PMID: 30999192 DOI: 10.1016/j.biortech.2019.121331

Third generation biofuels, also known as microalgal biofuels, are promising alternatives to fossil fuels. One attractive option is microalgal biodiesel as a replacement for diesel fuel. Chlamydomonas sp. Tai-03 was previously optimized for maximal lipid production for biodiesel generation, achieving biomass growth and productivity of 3.48 ± 0.04 g/L and 0.43 ± 0.01 g/L/d, with lipid content and productivity of 28.6 ± 1.41% and 124.1 ± 7.57 mg/L/d. In this study, further optimization using 5% CO2 concentration and semi-batch operation with 25% medium replacement ratio, enhanced the biomass growth and productivity to 4.15 ± 0.12 g/L and 1.23 ± 0.02 g/L/d, with lipid content and productivity of 19.4 ± 2.0% and 239.6 ± 24.8 mg/L/d. The major fatty acid methyl esters (FAMEs) were palmitic acid (C16:0), oleic acid (C18:1), and linoleic acid (C18:2). These short-chain FAMEs combined with high growth make Chlamydomonas sp. Tai-03 a suitable candidate for biodiesel synthesis.

Matched MeSH terms: Carbon Dioxide

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links